Step 1: Naturalized streamflow Reference runoff for each grid cell Step 2: VIC parameter calibration to reference runoff fields
Results: calibration improves streamflow
Simple reservoir implementation for flow simulation
• Simulate 25 major reservoirs in the basin • At each reservoir, simulate reservoir operation based on historical guide curve, reservoir
capacity, minimum release and maximum release • Add Δflow (= outflow – inflow) at each reservoir to all downstream grid cells with time lag
(assume linear superposition) Results: the simple reservoir model captures main features of flow regulation
• Weaker seasonal cycle; high flows are lowered by regulation
Climate change is expected to alter streamflow and stream temperatures in
the Southeast U.S. These climate-induced hydrological changes may affect human water use
and in turn the reliability of power systems (either for cooling or for hydropower generation) as well as crop production
Water, energy and food form an interdependent system
The UW team uses the Tennessee River basin as an initial case study: • Implement a hydrologic modeling framework in the Tennessee River basin • Evaluate model ability to simulate water availability (both streamflow and
stream temperature) • Demonstrate future climate impacts on water availability
Future Climate Impacts on Streamflow and Stream Temperature in the Tennessee River Basin Yixin Mao1, Tian Zhou1,2, John Yearsley1 and Bart Nijssen1
1Department of Civil and Environmental Engineering, University of Washington, Seattle, WA 2Now at: Pacific Northwest National Laboratory, Richland, WA
Modeling framework
Background and Objectives
Data and Methodology
Stream Temperature Results - Naturalized
Steps 1, 2 and 4: Simulate naturalized streamflow and stream temperature (i.e., unregulated) Steps 1-4: Simulate regulated streamflow and stream temperature
VIC Hydrologic Model Calibration Reservoir Implementation – Initial Stage
RBM stream temperature model [Yearsley, 2009 & 2012] • One-dimensional, time-dependent equation for
thermal energy transfer • Semi-Lagrangian particle tracking numerical
scheme Results: simulated naturalized stream
temperature matches USGS observation • Main temporal patterns captured on big rivers • Some anthropogenic features in observed stream
temperature on smaller tributaries are not captured by simulated naturalized temperature (not shown); need to consider reservoir effect in temperature modeling (work in progress)
Future climate projection (right plot) • Projections from 5 Global Climate
Models (GCMs) are used as demonstration (highlighted)
• Light-colored crosses: 36 GCMs, 1 to 10 ensembles each
Work in progress: improving reservoir modeling; implementing reservoir regulation in stream
temperature modeling; improving stream temperature model parameterization More GCMs will be involved in future impacts analysis This modeling framework will be coupled with power system modeling and crop modeling This case study for the Tennessee River basin will be scaled up to the Southeast U.S.
Discussion
Arthur Ramsey and Carrie Williamson, TVA; Yifan Cheng, University of Washington; Domenico Amodeo,
George Washington University This work is funded in part by the National Science Foundation under grant 1440852 to the University of
Washington
Acknowledgements
The overarching goal of this study is to evaluate potential climate impacts on water-energy-food nexus over the southeastern U.S. (collaborators: University of Washington, Carnegie Mellon University, George Washington University and the University of Missouri)
Step 3 – Reservoir Model
Step 1 – Hydrologic Model (VIC) (Variable Infiltration Capacity model)
Precipitation, temperature & wind speed at each grid cell
Energy fluxes & runoff at each grid cell
Step 2 – Routing Model (RVIC)
Naturalized streamflow
Step 4 – Stream Temperature Model (RBM)
Stream temperature
Regulated streamflow
Study domain • Tennessee River basin • 1/8o latitude-longitude grid cells (~12km)
Study period • Historical: 1949-2010 • Projected: 2006-2099
Control period: 1950-2005 • Time step: daily
Climate data • Historical: 1/8o gridded meteorological
product, 1949-2010 [Maurer et al., 2002] • Control and projected: 1/8o downscaled
CMIP5 climate projections [Reclamation, 2013]
Tennessee River Basin
Daily naturalized flow Reference runoff for each upstream grid cell
• Inverse routing method developed at Princeton University [Pan and Wood, 2013] • Flow information needed: naturalized flow (i.e., as if no
human regulation) at some stream locations; flow network and travel time
• By inversely routing the naturalized flow to upstream, we disaggregate the flow to all its upstream grid cells (i.e., reference runoff for each grid cell)
• Naturalized flow data: 21 dam locations, weekly pass-through data from Tennessee Valley Authority (TVA), downscaled to daily
VIC hydrologic model
Meteorological forcing
Soil & vegetation parameters
Output runoff
SCE auto- calibration
Reference runoff compare
• For each grid cell, compare reference runoff with model output; adjust model parameters and run model again until reaching optimized output runoff
• Shuffled Complex Evolution (SCE) autocalibration method [Duan et al., 1993]
• Objective function: Kling-Gupta Efficiency (KGE) of runoff for each grid cell [Gupta et al., 2009]
• Calibration period: water years 1961-1970 Validation period: water years 1971-2010
• Calibration improves streamflow seasonality , time series and flow duration curve (the latter two not shown) over most of the basin
VIC model structure
RBM model structure
Daily stream temperature, Tennessee River at South Pittsburgh
Results: future hydrologic projection (lower plots) • Future streamflow: slightly wetter in winter;
no significant change in summer • Future stream temperature: warmer in all
seasons Wetter
War
mer
Climate change – basin average Water years 1970-1999 to 2040-2069
Highlighted: access1-0 bcc-csm1-1-m canesm2 ccsm4 cesm1-bgc
Future hydrologic projections, Tennessee River at South Pittsburgh Streamflow Stream temperature
Duan, Q. Y., V. K. Gupta and S. Sorooshian (1993): Shuffled complex evolution approach for effective and efficient global minimization. J Optimiz. Theory
App., 76, 501-521. Gupta H. V., H. Kling, K. K. Yilmaz and G. F. Martinez (2009): Decomposition of the mean squared error and NSE performance criteria: Implications for
improving hydrological modelling, J. Hydrol., 377, 80-91. Maurer, E.P., A.W. Wood, J.C. Adam, D.P. Lettenmaier, and B. Nijssen (2002): A long-term hydrologically-based data set of land surface fluxes and states for
the conterminous United States, J. Climate, 15(22), 3237-3251. Pan, M. and E. F. Wood (2013): Inverse streamflow routing: Hydrol. Earth Syst. Sci., 17, 4577-4588. Reclamation (2013): 'Downscaled CMIP3 and CMIP5 climate and hydrology projections: Release of downscaled CMIP5 climate projections, comparison
with preceding information, and summary of user needs', Denver, Colorado. 47pp. Yearsley J. (2009): A semi-Lagrangian water temperature model for advection-dominated river systems, Water Resour. Res., 45, W12405. Yearsley J. (2012): A grid-based approach for simulating stream temperature, Water Resour. Res., 48, W03506.
References
Tennessee River Basin
Future Climate Impacts – Naturalized
Mean monthly flow, WY1970-2010, Tennessee River at Wilson Dam
Thou
sand
CFS
French Broad River downstream of Douglas Dam Mean monthly flow (left) and weekly flow duration curve (right), WY 1950-1973
Thou
sand
CFS
Thou
sand
CFS
Thou
sand
CFS