Notice

On Operation

Please make sure the device is intact without any damages before

connect it. If it is damaged, please contact us in time for after-sale

service.

If odor, overheating, discoloration, or deformation is detected during use, please disconnect the device immediately.

Please make sure your PC stays connected during the whole process.Do not disconnect the device or transceiver while coding.

On placement

Observe the following cautions, as there may be a risk of heat generation, electric shock, injury or malfunction:

Do not place the device in locations subject to high temperatures (e.g. by a fire or near a heater).

Do not use the unit in a humid place such as bathroom, or in a dusty place.

Do not place heavy objects on the device.

Please keep the device out of the reach of children.

On handling the device

Do not subject the device to strong impact.

Do not disassemble or modify the device. Doing so would void your warranty.

Please disconnect USB cable if the device is not to be used for a long time.

Do not use a damaged USB cable. Doing so may cause electric shock, overheating, and fire.

Introduction

It uses aluminium alloy as case material with delicate craftsmanship like

drawing process and hard anodizing, which makes it robust and

good-looking. And it is easy to carry due to its palm size design.

Product Accessories:

FS Box

Table 1

Data Center & Cloud Computing Infrastructure Solution Data Center & Cloud Computing Infrastructure Solution

（Figure1）

6

6 Standard USB Cable

3

1

2

4

5

SFP/SFP+

QSFP+/QSFP28

USB Interface

Indicator Light

XFP

3

1

2

4 5

1

1

Data Center & Cloud Computing Infrastructure Solution Data Center & Cloud Computing Infrastructure Solution

Standard USB 2.0-micro Cable

FS Box is an online reconfiguration instrument designed and

manufactured by FS.COM. It supports instant reconfiguration for SFP/SFP+,

XFP, QSFP+/QSFP28 transceivers, DAC and AOC cables. Based on Cloud

coding platform, it is easy to install and operate, providing the most convenient

and timely coding & re-coding services for our customers, saving much time

and expense.

Name Qty

Size

Weight

Case Material

Input Voltage

Operating Temperature

Supported Form Factor

Supported Operating Syetem

Interface

Rendering Engine

108mm*100mm*22mm

220g

Aluminium Alloy

5V

-10℃ to 60℃

SFP/SFP+/XFP/QSFP+/QSFP28

Microsoft Windows 7 and later

USB2.0

Chrome 62 and later

Table 2

Specifications

FS

V 1.1

NETWORKS

FS BOX USER MANUAL

Operation Instruction:

Go to fsbox.com

（Figure 2）

Connect FS Box to

computer via USB cableStart coding

Note: Please pull the bale-clasp latch when unplug the transceiver.

1

2

Insert transceiver or cable3

4

Data Center & Cloud Computing Infrastructure Solution Data Center & Cloud Computing Infrastructure SolutionData Center & Cloud Computing Infrastructure Solution Data Center & Cloud Computing Infrastructure Solution

（Figure 3）

www.fs.com

Copyright© 2009-2018 FS.COM. Limited All Rights Reserved.

Light NO

.1

Light NO

.2

Light NO

.3

Light NO

.4

Red light ON

Green light ONRed light Blinking

All OFF

SFPSFP+

XFP QSFP+QSFP28

1 2 3 41 2 3 4

Indicator Light

Light NO.1 Light NO.2 Light NO.3 Light NO.4 Indication

Status

Reading Succeeded

In Coding

Coding Succeeded

Device Connected to PC

Service Activated

Transceiver Detected

Reading Information

Table 3

fsbox.com