7/27/2019 FP5121
1/5
FP5121
ELECTRONICS PVT. LT
RENU
FlexiPanels
12.1" TFT
Color Touch Scr
7/27/2019 FP5121
2/5
alient Features :-
12.1 Graphical Touchscreen TFT Color Display
Ladder editor with powerful instruction set
Support for Recipes and 32K color Bitmaps
Communication Ports:
Two serial ports to connect PLC at RS232 / 422 / 485 levels / Printer / Programming Port
One USB (Device) port as Programming Monitoring Port
One USB (Host) port to connect USB memory drive
One optional Ethernet port (10/100 Mbps. Modbus TCP/IP)
Dual Port communication supported
Data Logging, Transfer logged data on USB memory drive
Floating point support, Alarms and Trending (Real Time and Historical), RTC
Multilanguage (Unicode) support with true type Windows fonts for graphical models
IP66 design. CE, UL approved. RoHS compliant
Common Programming software for the entire FlexiPanels family.........FREE!!
7/27/2019 FP5121
3/5
Operations :-
e FlexiPanels support Operator interface as well as Programmable Logic Controller Counter-
tures. The user can implement logic, specific to application using standard Ladder Up counter UP Down Counter
ogramming. A PLC logic block can be executed at power up, during every scan, upon Program Control -eiving an interrupt on specific I/O pins or upon a timer interrupt. The FlexiPanels
Subroutine CALL Subroutine RET Forerator interface functions revolve around Screens and Tasks that can be assigned to
Next Master Control Set Master Control Reseteens and application.
Jump Control Set Jump Control Reset En Intr
Dis Intr DT Step sequence Inituch Keys Task Step sequence Input Step sequence outputuch Keys in FlexiPanels can be assigned Tasks for three instances: when the screen is
uched, while the screen is touched and when the screen is released. Multiple tasks can
Function -assigned to a touch key. In addition to above, tasks for data entry, alarm management
Moving Average Digital Filter PID1,4. can be defined. These definitions allow Complete flexibility in cursor control and key
Upper limit Lower limit Maximum Valueerations when changing data.
Average Value Function generator Minimum Value
arms Special -al time and historical Alarms can be defined in FlexiPanels . User-friendly Alarm object
Device Set Device Reset Register Setn be defined on the display. Alarms can be real time or historical.
Register Reset Set Carry Reset Carry
Encode Decode Bit Count Flip Flopcipes Direct I/O Set Calender Calender Operationcipes data is stored in the FlexiPanels memory. With one button stroke, a set of data
n be downloaded to the PLC. Once in the local memory, the recipes data can be edited
The execution of ladder logic is in microseconds. Ladder monitoring for debugging is alsong simple data entry objects.
supported in FlexiPanels configuration software.
maps / Wizards Multilanguage / Unicode Supportferent bitmaps can be embedded on the FlexiPanels screen. Transparent buttons can
All the languages are supported in the FlexiPanels (Color Touchscreen based models) . Theused for data entry and set points on bitmap images. Bitmaps can be imported into the
can now display messages, alarms in any regional language. All Windows fonts can also beplication and displayed on the FlexiPanels screens. In addition, several wizards arein an application.pported to create commonly used objects such as Analog meters, Lamps, Buttons and
r graphs. 32K colors are supported for bitmaps.
Communication Ports
FP5121 has two serial communication ports. Both the ports can be used for programming osy events logging and trend tracking FlexiPanels , printing screens (only text), connecting to third party serial devices (barcode5121 models support data logging feature. A part of FlexiPanels memory can be
readers, temp scanners etc.) or to connect to a PLC or drive.otted for data logging. Real time as well as Historical Trending is also supported. The
Dual port feature is supported for FP5121. User can configure these serial ports to connect er can also display multiple trends with different pen color on one screen.
different devices supporting different protocols, such as PLC / Drives / DCS / SCADA etc.
dder Support It has one USB (Device) port. The USB port can be used as a programming port or for laddexiPanels support ladder functionality. User can define logic in the unit using FlexiSoft
monitoring. The unit also has one USB (Host) port. The USB Host port can be used to conntware. The execution of ladder could be through communication port or through I/O. memory drive.ly HMI version of FlexiPanels also support ladder functionality. It is used for critical
plications where data is processed before sending it to controller. The FlexiLogics
Ethernet Portpport following different types of instructions :
FlexiPanels support optional Ethernet port (Modbus TCP/IP). It can be used to connect to a
and monitor machine / process status from remote location. The Ethernet port can also be uInstructions -
for remote programming of FP5121.O contact NC contact Output
ling Edge Rising Edge Inverter
Configuration Softwareverter Coil Positive Pulse Contact Negative Pulse Contact
FlexiSoft is a compact, Windows based software to configure the FlexiPanels units. Usersitive pulse coi l Negative Pulse Coi l
friendly configuration tools and easy approach, helps user create applications quickly and ea
ta Transfer -
OV word MOV DWORD Invert Transfer
ble Initialize Table Block Transfer Table Invert Transfer
ta Exchange Multiplexer Demultiplexer
ath-
dition Subtraction Multiplication
vision Addition with Carry Subtraction with Carry
crement Decrement
mpare -
eater than Greater than or equal Equal
t Equal Less Than Less than or Equal
gic -
D OR XOR
ift Rotate
To get started with FlexiPanels , user needs:ta Conversion -
1. FlexiPanels unit 2. FlexiSoft Softwarex to Ascii Ascii to Hex Absolute Value
3. USB Programming cable (Part no. PC-USBAB-00)segment decode Ascii conversion Binary Conversion
D conversion 2's complement word 2's complement Double word
OS requirements for FlexiSoft are:
mer - Windows Version : Microsoft Windows 2000 or above
N TOFF TSS
7/27/2019 FP5121
4/5
upported Task in FlexiPanels are :-
Driver FP5121
Allen Bradley DF1
Aromat FP Series
Danfoss Drive
ABB
Delta
Baldor
Fatek
GE Fanuc
GE SNP-X
Driver FP5121
Mitsubishi Q series (Serial)
LG Master K series
LG Master-K 300S
Modbus master
Mitsubishi FX
Idec
Omron Yaskawa Drive
Omron Host Link
Modbus slave
Driver FP5121
Toshiba T2 Link port
Serial Monitor
Siemens-S7-200
Siemens-S7-300
Toshiba Inverters
Universal Serial (ASCII)
Toshiba T1
UnitelwayTwido
Protocols Supported for :-
Write value to tag
Add constant to tag
Subtract constant from tag
Add tag B to Tag A
Subtract tag B from Tag A
Turn bit ON
Turn bit OFF
Toggle bit
Copy Tag B to Tag A
Swap Tag A and tag B
Copy HMI block to HMI/PLC block
Copy HMI/PLC block to HMI block
USB Data Log Upload
Print Data
Set RTC
Copy RTC to PLC block
Copy tag to STR
Go to screen
Go to next screen
Go to previous screen
GoTo Popup screen
Wait
Delay
Copy tag To LED
Task
Type
Power up Global Before
showing
While
showing
Screen
After
hiding
7/27/2019 FP5121
5/5
Dimensions :-
lease contact factor y for more information. We welcome an opportunity to develop new, custom drivers and customized units.
(Specifications subject to change without prior notice DS-FP5121
All dimensions are in mm.
An ISO 9001 : 2008 and ISO 14001 : 2004 certified company
FACTORY
Survey No. 2/6, Baner Road, Pune - 411045, India.
Tel : +91 20 2729 2840 Fax : +91 20 2729 2839
Email : [email protected]
Website: www.renuelectronics.com
One D type port that supports RS232 and RS485 levels on different pins. Y type cable can be used for separate RS232 and RS485 levels simultaneously.
Model Comparison :-t Model PLC
Steps
Memory Screen
Memory
Logging
Memory
Serial**
Ports
USB RTCEthernet
Port
Power
Consumption
Weight Panel CBezel Dimensions (mm)
1
Display LCD LifeO
at 25 C
FP5121TDevice
and Host
Yes160 kUp-to
14 MB
293 W 312 W x 246 H x 48 D
(Drawing D)
1.680 Kg16WNo2YesUp-to
10 MB
800x600 SVGA
12.1" Color TFT
70000 hrs
Device
and Host
TS
Yes
Yes Yes160 kUp-to
14 MB
800x600 SVGA
12.1" Color TFTFP5121TN 293 W
312 W x 246 H x 48 D
(Drawing D)
Drawing D
1.680 Kg16WYes2YesUp-to
10 MB70000 hrs
312
200
225
246
293
238
Mounting Clamp
48
upported Printers :-
exiPanels support following Dot matrix serial printers :
EPSONSAMSUNGTVS
pecifications :-
wer : + 24V DC 15%, 16W Type of LCD : TFT Color Touch ScreenO
LCD Life : 70000 hrs at 25 Czel : IP66 rated Touch ScreenO O
perating Temperature : 0 to 50 C Supported Colors : 32K for Color TFT LCDO O
orage Temperature : -20 to 80 C Immunity to ESD : as per IEC61000-4-2
umidity : 10% to 85% (Non condensing) Immunity to Fast Transients : as per IEC61000-4-4
mmunication Ports : Two serial ports (RS232 / RS422 Immunity to Radiated
/ RS485 levels supported) Electromagnetic field : as per IEC61000-4-3
SB Device Port : As programming and monitoring port Immunity to
SB Host port : Supports USB Memory drive Conducted disturbances : as per IEC61000-4-6
hernet Port : For connecting to a PLC, Surge : as per IEC61000-4-5, Radiated emission : as per EN55011Programming of FlexiPanels a
third party device,Drive or remote
monitoring (10 / 100 MBPS).
Recommended