Download pdf - FP-2260 - Thwing-Albert Instrument Company ISO 9001 Registered Company Specifications subject to change without notice. Specifications FP-2260 Shown with T-Peel Fixture

An ISO 9001 Registered Companywww.thwingalbert.com

More Than a Century of Testing Solutions

MAP4 Software (Windows 10 Compatible)

FP-2260 w/ Heated Platen

FP-2260 Friction/Peel Tester

� Complies to industry standards for tensile, peel, and coefficientoffrictiontesting

� Intuitivemenudesignwhichprovidesmoreresultswith fewer key strokes

� Ability to create, save and password protect test setups

� MemorycapacityontheFP-2260canstore128individual tests for COF, Peel, or Tensile

� Samplingrateupto250timespersecondwithMAP4 software

� MAP4 software allows users to instantly view and analyze test data

� Manyoptionalaccessoriesandfixturesareavailableto perform a variety of peel, COF, seal tests, and tensile tests

� Automaticloadcellcapacityrecognition

� Stable load system

FP-2260 Friction/Peel Tester

TheThwing-Albert FP-2260Friction/PeelTesterisaversatiletestinginstrumentformeasuringthecoefficientoffriction,peelstrength,sealstrengthandtensilestrengthofflexibleplasticfilms,paper,labels,tapes,nonwovens,textilesandothersheetmaterials.Itwasdesignedtoprovideflexibilityforits users so it is useful in many different industries such as the paper, plastic, adhesives, textile,flexible packaging, foils, coatings, leather andpaperboardindustries,aswellasothers.


TheFP-2260 Friction Peel Tester can be equipped withattachmentsthatallowtestingforawidevarietyofstandards. Sample tests include:

ASTMD1894(COFforPlastics)ASTMD4521(COFforCorrugated/Fiberboard) ASTMD2534(CoefficientofKineticFrictionforWaxCoatings)ASTMD3330(PeelAdhesionforPressureSensitiveTape180°)ASTMF88(SealStrengthforFlexibleBarrierMaterial) AFERA: 4001 P11 FINAT: FTM 1-6, 10, 11 ISO8295(COFforPlastics)PSTC:101(A,B,C,D,E,F),4,15,55 TAPPIT-816(COFforCorrugatedandPaperboard)TAPPIT-549(COFforUncoatedWriting&PrintingPaper)TLMI:L-IA1,L-IA2,L-IA3 Visit www.thwingalbert.comforacompletelistingofindustry standards.

&The180degreepeelarmforpeeltestingisincluded with all FP-2260 units.

Optional Clamp: thissampleclampassembly is ideal for thin-sheetedmaterials.

The90degreepeelfixtureisanidealaccessoryforadhesivematerials. Also available withaheatedoption.

TheT-Peelfixturemaintainsa90degreeangleforthetailduringapeel test.

TheCOFSledshownwithoptionalsampleclampontheFP-2260HeatedPlatenFixturewithtemperaturerange21°Cto176.7°C(70°Fto350°F).

The FP-2260 is equipped withthespringclip clamp assembly forthickorthinsamplematerials.

Fixtures

Accessories

Air Clamps

Part#2250-8850 Part#2250-8800

Vise Clamps - 100N

Manual Clamps


Specifications subject to change without notice.

Specifications

FP-2260 Shown with T-Peel Fixture

Physical Specifications - Model FP-2260

Dimensions: 27inLx12inWx7inH(685.8mmx304.8mmx177.8mm)ShippingDimensions: 29inLx21inWx15inH(838.2mmx609.6mmx355.6mm)NetWeight: 44lb(20kg)Approx.GrossWeight: 52lb(23.6kg)

MeasurementLoadCellRange:0.5kg,1kg,2kg,5kg,10kgForceResolution:0.1gforallloadcellsForce Accuracy:

10% to 100% load capacity: ±0.25%ofmeasuredvalueLessthan10%loadcapacity: ±0.025%ofLoadCellCapacity

ForceUnits: Grams,Kilograms,Ounces,Pounds,Newtons

Travel SpeedStandard Speed: 1to20in/min(25.4mmto508mm/min)

HighSpeed: 10to110in/min(254to2,794mm/min)

Test Times0.1to99seconds-VariableforCOF,andPeel

Travel Distance0.1to14.0in(0.3to38cm)

Test Result ReadoutsCOF:Static,Kinetic,SlideAngle,StandardDeviationofKineticDataPeel: Average,High,Low,StandardDeviationTensile and Seal: PeakStatistical Analysis

Power Options110-230Volts,50-60Hz

Standard COF Sled Options200g,500g,1000g,and3lb

Heated Platen COF SledsEZSled(200g)-00225-3050

COFSled(200g)-02250-4400

COFSled(200g)-00225-0218

SelfAdjusting3-BallSled-02250-3111

NOTE: Custom sleds are available. Software accepts variablesledweights.

Performance Data - Model FP-2260

Thwing-Albert Instrument Company 14 W. Collings Avenue, West Berlin, NJ 08091, USA

tel 856-767-1000 fax 856-767-2615 [email protected]


TA022718

Includes a built-in libraryoftestingmethodstocomplywithASTM, ISO, TAPPI, DIN and otherstandards.

Simple customization whenyourtestparameterschangeopenexistingmethods;modifyandsavenewcustommethods.

Advanced userscanhavefullcontroloverthemotionanalysisandthepresentationofdata.

ThisisasimplifiedMAP4Softwareoptionrecommendforeaseofuseandbasicdataevaluation purposes.

■ Instantly view and analyze test data ■ Report statistical data ■ Store test procedures

■ Establishtrackingvariables ■ SQL database for test results

MAP4 LTE Basic Software Option Available:

MAP4 SoftwareMAP4softwarecomesequippedwithpresetstandardsavailableforuseoutofthebox.TheMAP4softwareiscompatiblewiththeFP-2260Friction/PeelTesterandallowstheinstrumenttorunusingWindows7,8or10operatingsystems.Thiseasy-to-usesoftwareisusedtodesign,customizeandmaximizeyourtestingproceduresandfinaloutputusingsimplemenus.

Testmethodsarebuilt-intotheprogramforvariousapplicationsincludingcoefficientoffriction(COF),180°peel,90°peel,T-Peelandwiththeabilitytocustomizethesetests,thepotentialisunlimited.Whenitcomestoflexibilityandcapability,MAP4softwareisequippedtotestavarietyofmaterialsincludingpaper,plastic,rubber,textiles,andnonwovens.

Data Acquisition

AutomaticallycapturetestresultsandstatisticsforFrictionandPeeltestingandstorethemwithtestidentifiers.Datacaptureincludes:

■ Peel Testing - Max,Mean,Min,andStandardDeviation

■ Coefficient of Friction Testing - Static,Kinetic,StaticSlideAngle,and KineticStandardDeviation

■ User Defined Results - Specifictoyourtestingneeds

■ Report/Statistical Data - Max,Min,Average,andStandardDeviation

Data Management

Includeinformationidentifyingtestconditionsandsampletype,addanddeletetestsfromgroupdata,markfilestoviewmultiplecurvesanddefineviewabledatarange.

Built-in Reporting

Createareportofaseriesof testsbyselecting“Report”on theFriction/PeelTesterorselectspecific testresults to be included.