R
SYST-M startersto 60 HP
features
Ready-made, ready-to-install enclosed
AC magnetic starters to 60 HP
Features Moeller’s DIL M contactor and
ZB thermal overload relay for precise
control within a small footprint
Non-reversing & reversing; fused
combination & non-combination
configurations available
Components are pre-wired and
housed in a heavy duty NEMA 1
enclosure
Fully modular with plug-in technology
for easy change-out of components
Pre-assembled pilot device kits and
optional accessories come ready for
quick and easy installation
Usually in-stock for immediate delivery
or available in 24-hour turn
1. Non-Reversing
• 10, 25 and 60 HP
starters @ 575V
• As small as 17 x 24 x 15 cm
2. Reversing
• 10, 25 and 60 HP
starters @ 575V
• As small as 17 x 24 x 15 cm
3. Non-Reversing
• 10, 20, 25, 40 and 60 HP
starters @ 575V
• As small as 27 x 60 x 20 cm
• Includes fused disconnect
with rotary handle
4. Reversing
• 10, 20, 25, 40 and 60 HP
starters @ 575V
• As small as 27 x 60 x 20 cm
• Includes fused disconnect
with rotary handle
All SYST-M starter base units include: • NEMA 1 heavy gauge enclosure with back-
plate and knockouts
• Moeller DIL M contactor (mounted)
with 120V coil
• Plug-in quick connector for pilot device
kit (must order separately to complete the
starter)
• Reset push button pre-mounted on cover
• Pre-installed grounding terminals
• Quick connector for an optional control
power transformer
four starter types
Full Voltage Non-Combination
Starters
Full Voltage Combination
Fusible Starters
SYST-M starters to 60 HP
For your most demanding applications, Moeller’s new
SYST-M starter provides a fast, economical solution. The
contactor is pre-installed in a NEMA 1 enclosure, ready to
accept your choice of overload relay, pilot device kit and
optional components. It’s ready-made. It’s ready-to-go.
moellerNA.com
Moeller Corporate Headquarters4140 World Houston Parkway, No 100Houston, Texas USA 77032Tel 713.933.0999Fax 832.613.6255
Moeller Canadian Head Office7275 Rapistan CourtMississauga, Ontario CANADA L5N 5Z4Tel 905.542.2323Fax 905.542.2321
© 2007 by Moeller, Inc. • Technical and other changes reserved • Printed in the USA 01/07 • Pub: SYSTM-BROC-0107 • Article No: 695024
modular. fast. economical. SYST-M starters to 60 HP
Moeller has designed a complete line of enclosed, ready-made
starters that are ready to install and use immediately. The entire SYST-M
family is fully modular, so availability is generally
from stock. The line is designed for a variety of applications to 60 HP
(@575V), including basic non-reversing and reversing starters. Both configurations
are also available in non-combination and fused combination designs.
it’s just that simple.
Ready-made, but rugged At the heart of every SYST-M starter is the new Moeller
DIL M contactor. Five different DIL M horsepower
ratings are available within the SYST-M series,
including 10, 20, 25, 40 and 60 HP units.
This range allows you to more closely
match the contactor to the demands
of your application.
Each SYST-M starter is pre-wired in a
heavy duty NEMA 1 enclosure with back
plate, grounding terminals and knockouts.
ready-made. ready-to-go.
A variety of control optionsPre-assembled pilot device kits come in many
configurations, from 2-position and H-O-A selector
switches, to START/STOP pushbuttons with a pilot
light. A manual RESET button is also pre-installed on
the front cover. All pilot devices are from Moeller’s
outstanding RMQ-Titan line – the most attractive,
well-built buttons and lights available.
Accessories are easy to select and install Optional Control Power Transformers (CPT) are
available with both a primary and secondary fuse block
and fuse. There are four incoming voltages to
choose from, including 208, 240, 480 and 600.
Output voltage is 120V to match the contactor.
You may also select a 5-wire plug-in adaptor
for use when the starter is controlled from a
remote location. As with all SYST-M components,
accessories are pre-wired with plug-in technology for fast
and easy installation.
Reliable protection Each SYST-M starter includes a ZB thermal overload relay. Eleven
different sizes are available to complete the starter, and provide
adjustable settings for 0.1 to 65 full load amps. Every ZB
relay in this range is a Class 10 device, providing superior
protection against overloads and extending motor life. And,
because of its direct mount design, the ZB relay and resulting
starter command a very small footprint.
1
2
3
4
Plug-in speed and convenience The essence of SYST-M starters is their
modularity. Regardless of which model you
choose, all starters come equipped with plug-in
connectors for pilot device modules and control
power transformers. This not only allows us
to build and ship quickly, but allows you to
change components in a snap.
Choose your starter type and horsepower rating
Select appropriate thermal overload
protection
Choose from several pilot device configurations
Add optional accessory components as needed
That’s it – you’re done!