manpower supply – electro – instrumentation – mechanical disciplines – engineering – projects – enterprise of competence
HSE – health, safety and environment policy
These policies are to be enforced at all locations where Båtservice has an active participation in ongoing operations. Declaration of Principles Båtservice shall at all times perform duties in such a way that it does not cause harm to our employees or others, either
directly or indirectly by ensuring that our activities, at all times, maintain the highest practical standard for health, safety and environment. Health, safety and protection of the environment are equally important in all our basic business, and in our safety measures. To safeguard both human, physical and environmental conditions, is essential for efficiency and success in any business
area. Health, safety and to safeguard the environment is everyone's responsibility and requires a direct commitment from all parties, whether it be executives, managers or operators.
Objectives In accordance with these principles Båtservice seeks to achieve the following objectives:
Prevent any damage to the work site. Prevent any damage to equipment or property Provide a safe working environment Ensure that all employees are able to perform their tasks in a safe manor
Wherever it is practically possible, adapt and exceed all environmental regulations Regularly review the existing routines for health, safety and environment, and seek
continuous improvement.
Mandal
Lindesnes
Kristiansand
Malmø
Eiendom
Vestnes
Brygge
Gismerøya
Eiendom
Gismerøya – Head Office and Administration
Total area: 44000m2
Workshop area: 2640 m2
Workshop height: 26m
Crane capacity: 2x40T + 2x10T
Depth at berth: 10,5m
Depth increase 1,4m/m
Min. depth approach: 16,5m
Min. width of the approach: 176m
Company Profile
Båtservice Contracting AS (BC) is a company in the Båtservice Group which was founded in 1948. BC was registered as a separate company in 1987 and
has the subsidiary Båtservice ITC AS (ITC).
We are a supplier to the oil & gas, marine and process industries. The main activity is manpower supply, both skilled workers and engineers, but we also have projects
with total responsibility for fabrication, installation and commissioning. Management of BC and ITC are aligned , where BC will take care of mechanical disciplines and ITC electrical disciplines and engineering.
Our head office is located at Gismerøya in Mandal. Båtservice Group has a new modern workshop at Gismerøya, with a deep-water harbor right outside the door. BC and ITC also have offices in
Egersund and Stord. Our yard in Stord is approved as an enterprise of competence and specializes in weighing, force measurement and instrumentation. Our workshop has a calibration lab for certification of load pins and
dynamo meters, electro and machine workshop.
Managing Director
Øyvind Hægeland
Regional Manager Egersund
Ottar Gimre
Regional Manager Stord
Randi Stokke
Operations Manager
Kenneth Osberg
Accounting
Anne Bodil Usland
Site- coordinator
Operators
Head Safety Delegate
Rune Solberg
Safety Delegate
EGERSUND STORD
Inspector - Cranes
Sigurd Hystad
Inspector – Lifting Devices
Trygve Tveit
HEAD OFFICE MANDAL
ENTERPRISE OF COMPETENCE
Sigurd Hystad
Site-coordinators
Operators
Safety Delegate
- Oil & Gas industry - Maritime industry - Process industry
Projects - Mechanical - Piping
- Steel/Alu Structures
survey – engineering – fabrication – installation – commissioning – service/maintenance
Onshore - Offshore
Manpower Supply - Mechanical Diciplines - Admin/Project management
- Engineering
Se
rvic
es
survey – engineering – fabrication – installation – commissioning – service/maintenance
Onshore - Offshore
- Oil & Gas industry - Maritime industry - Process industry
Manpower Supply - Electro/instrumentation - Admin/Project management
- Engineering
Enterprise of competence - Inspection and certification of cranes and lifting equipment - Development, production and sales of weighing systems with
instrumentation - Repair, calibration and certification of load cells, load pins and weights - Weighing Operations - Rental of weighing equipment, load cells and weights with instrumentation and logging units
Se
rvic
es
Manpower Supply Mechanical disciplines
Project Managers
Site Managers Discipline Managers
Supervisors
HSE Project Engineers
Service Engineers Struc. Fitters
Pipe Fitters
Certified Welders Mechanics
Ma
np
ow
er S
up
ply
– M
ech
.
Contact info:
Operations Manager: Kenneth Osberg
+47 95936655 – [email protected]
Regional Manager Stord: Randi Stokke
+47 47463452 – [email protected]
Regional Manager Egersund: Ottar Gimre
+47 48007944 – [email protected]
Switchboard: +47 38278010
Fax: +47 38263381
E- mail: [email protected]
www.BContracting.no
Manpower supply Electro/Instrumentation
Project Managers
Site Managers Dicipline Managers
Supervisors
HSE Project Engineers
Service Engineers El. Struct. fitters
Instr. fitters
Electricians Automation serv.
Fiber Network inst.
Ma
np
ow
er s
up
ply
– E
/I
Contact info:
Operations Manager: Kenneth Osberg
+47 95936655 – [email protected]
Regional Manager Stord: Randi Stokke
+47 47463452 – [email protected]
Regional Manager Egersund: Ottar Gimre
+47 48007944 – [email protected]
Switchboard: +47 38278010
Fax: +47 38263381
E- mail: [email protected]
www.BContracting.no
Contact info:
Manpower Supply Engineering
BC has provided engineering services to the industry for more than 20 years and has now introduced
this as a separate business area under ITC.
We provide services to the Oil & Gas industry, maritime and process industry, and offer personnel with
competence based on our customers requirements, from draftsmen to senior engineers with special expertise.
Our staff is closely integrated to our customers projects. We also recruit personnel from other parts of
the world, with relevant experience, and preferably references from previous projects in Norway.
We have provided services to the on and offshore industry for 25 years, and the company management
have even more experience in the industry. Our experience results in a close and constructive dialogue with our customers.
Regional Manager Stord: Randi Stokke
+47 47463452 – [email protected]
Managing Director: Øyvind Hægeland
+47 95118211 - [email protected]
Ma
np
ow
er s
up
ply
– E
ng
ine
erin
g
Switchboard: +47 38278010
Fax: +47 38263381
E- mail: [email protected]
www.BContracting.no
Projects P
roje
cts
We also take total projects, and can provide complete project teams for hire.
Fabrication of structural steel/alum. and piping Installation tasks Commissioning / start-up of equipment Service contracts The entire project - from survey to as-built
documentation.
Contact info:
Managing Director: Øyvind Hægeland
+47 95118211 - [email protected]
Switchboard: +47 38278010
Fax: +47 38263381
E- mail: [email protected]
www.BContracting.no
En
terp
rise
of C
om
pe
ten
ce
Enterprise of Competence Inspection and certification of cranes and lifting equipment
Båtservice ITC in Stord is certified Enterprise of Competence within the following classes:
G1 Mobile Cranes G3 Portal / Swing Cranes G4 Bridge / Overhead Cranes G7 Winches /Hoists G8 Truck Cranes G10 Hand-operated cranes G11 Loose items / lifting gear G12 Scene rigs
Senior Engineer: Sigurd Hystad
+47 40402471 – [email protected]
Contact info:
Regional Manager Stord: Randi Stokke
+47 47463452 – [email protected]
Managing Director: Øyvind Hægeland
+47 95118211 - [email protected]
Switchboard: +47 38278010
Fax: +47 38263381
E- mail: [email protected]
www.BContracting.no
Enterprise of Competence Development, production and sales of equipment for weighing and dynamic force
measurement with instrumentation
Weighing services up to 1200 tons. Repair/calibration/certification of dynamometers/load indicators and other
electronic weighing equipment Rental of weighing equipment and dynamometers with instrumentation
and logging units. Consultancy–engineering services and trouble shooting by measuring
strain and mechanical stress with strain gauge techniques.
Development, production and sale of equipment for weighing and dynamic force measurement with instrumentation
En
terp
rise
of C
om
pe
ten
ce
Senior Engineer: Sigurd Hystad
+47 40402471 – [email protected]
Contact info:
Regional Manager Stord: Randi Stokke
+47 47463452 – [email protected]
Managing Director: Øyvind Hægeland
+47 95118211 - [email protected]
Switchboard: +47 38278010
Fax: +47 38263381
E- mail: [email protected]
www.BContracting.no
Enterprise of Competence Products
We tailor-make load pins, dynamometers and shackle bolts based on our customer’s specs. Standard material is UGIM 165M, but other materials are available upon request.
We recommend an external amplifiers, but can also supply pins with internal amplifier cards.
The instruments/amplifiers come with cables or wireless signal, and can be equipped with logging functions for reading of misc. parameters over a period of time
Our products are also available in EX/ATEX version.
En
terp
rise
of C
om
pe
ten
ce
Senior Engineer: Sigurd Hystad
+47 40402471 – [email protected]
Contact info:
Regional Manager Stord: Randi Stokke
+47 47463452 – [email protected]
Managing Director: Øyvind Hægeland
+47 95118211 - [email protected]
Switchboard: +47 38278010
Fax: +47 38263381
E- mail: [email protected]
www.BContracting.no
Enterprise of Competence Systems
We provide complete weighing and force measurement systems based on our customer’s specs.
Bakes
Motor
Wire-drum
Winch
Force Sensor example:
- Loadpin omn wire sheave - Pressure transmitter (hyd.or pneum) - Position/prox sensor on drum - Current measurement on motor - Loadpin on break - Force sensor on foundation
- Amplifer - PLC with calculations - Power supply
Local readout Control room readout
En
terp
rise
of C
om
pe
ten
ce
Senior Engineer: Sigurd Hystad
+47 40402471 – [email protected]
Contact info:
Regional Manager Stord: Randi Stokke
+47 47463452 – [email protected]
Switchboard: +47 38278010
Fax: +47 38263381
E- mail: [email protected]
www.BContracting.no
BC Personal database
We have made our own database for registering of personnel, competence, customers and projects. This tool give us quick and accurate response to our customers requests.
• Eiken Mek. Verksted
• Parat Anders Halvorsen
• Rosenberg Verft
• Maritime GMC
• Westamarin
• UMOE Mandal
• Sigurd Seland
• Lyngdal Mek
• Offshore Marine
• NLI Alfred Andersen
• NLI Engineering
• Finn & Albert Egeland
• ABB
• Vetco Aibel
• Reime AS
• Gunneo
• Oma båtbyggeri
• Westcon Ølen
• Statoil
• Kværner Fjellstrand
• Nymo Mek Verksted
• Rogaland Skipsservice
• Per Skarveland Rør
• Kværner Installasjon
• OIS
• Leirvik Sveis
• Randaberg Sveis
• PM Engineering
• Norske Fabricom
• Heerema Tønsberg
• Promeco
• Bjørge Offshore
• Peder Halvorsen
• WME
• Westcon løfteteknikk
• Munch
• Cargotec
• PGS
• Aker Stord
• Aker Egersund
• Aker Offshore Partner
• Aker MH
• National Oilwell
• Flekkefjord Slipp & Maskinfabrikk
• Simek
• GE Healthcare
• Simex
• Rotator Norway
• Agdermaskin
• Norfas
• Norton
• Hydra Marine
• Advantec
• Apply
• Eidesvik
• Odim
• Seadrill
Reference list
Our main customers are located in Norway, but we also have project references from Finland, Iran, South Korea, China, Singapore, The Netherlands, Brazil, Poland and the USA
Head Office Gismerøyveien 227 P.O Box 354 4503 MANDAL Swichboard: +47 38 27 80 10
Fax: +47 38 26 33 81 [email protected] [email protected] www.BContracting.no
Managing Director: Øyvind Hægeland +47 95118211
Operations Manager: Kenneth Osberg +47 95936655
Stord: Vabakkjen 6 P.O Box 18
5401 Stord Regional Manager: Randi Stokke Mobil: +47 47 46 34 52
Mail:[email protected] Enterprice of competence: Sigurd Hystad +47 40402471
Contact info.
Egersund: Regional Manager: Ottar Gimre
+47 48007944 [email protected]
Recommended