Fiberworks Ultra High Density CWDM Solutions Guide
What is the FiberworksUltra High Density CWDM Solutions?
ULTRA HIGHD E N S I T Y C W D M M U X / D E M U X SO L U T I O N S
PERFORMANCE
AND DESIGNT H A T G O E S B E Y O N D T H E
NEXT LEVEL
Fiberworks is introducing a new, ultra compact CWDM multiplexer solution. This multiplexer is functionally identical to our 8+1-mux. It covers all CWDM channels from 1470 nm to 1610 nm. In addition the ultra compact mux has a 1310 nm wideband upgrade port used for 8 CWDM-channels in the lower band, or existing equipment on 1310nm. The added monitor ports ensures easy troubleshooting without downtime.
You can fit 5 modules in our standard 1U chassis. In a 2U chassis you can fit 12 modules. There is also the possibility of so called «0U mounting», which allows the mux to be mounted outside the rack.
>>> Improved Density
>>> Flexible Configuration
Modular Design <<<
Reduced Installation Time <<<
1
2
3
4
5
UHD 1U 5 SlotModular Chassis
UHD 2U 12Slot Modular Chassis
UHD 1U Sliding/Storage Management
FIBERWORKS UHD8 channel Low band CWDM Mux+DemuxModule
FIBERWORKS UHD8+1 channel CWDM Mux+Demux Module
Fiberworks Ultra High Density System is a small footprint and is perfect for reduced space in high fibre density rack environments.
1. UHD 1U 5 Slots Modular Chassis
2. UHD 2U 12 Slot Modular Chassis
3. Fiberworks UHD CWDM mux+demux Module
Telecom Central/Data Center
Fiberworks UHD CWDM mux+demux Module
UHD 2U 12 Slot Modular Chassis
Ultra Slim Panel
2
1
3
Typical Application Scenario
1U Chassis Feature Overview
Easy Fibre HandlingExtremely high density fibre
port design with new fibremanagement options provide
easy port accessHigh Density
Up to 5 modules in 1U – 40 CWDM channels
Innovative DesignModules provide ultra high density
fibrecapacity – up to 40 CWDM channels in
1U space.PLUS utilising the new design of LC
Quadadaptors means there is no need for
additional extraction tooling
Ultra High Density
2U Chassis Feature Overview
Ultra High Density ComponentsConsisting of new high density chassis, panels,
modules, fanouts, trunks, patch cords and fibremanagement products addressing modern fibre
infrastructure in high density environment
Front DoorPatch cord protection and
labelling position on reverse forclear port identification.
Labelling card included if nofront door is required
Front ManagementVelcro ties for front
management allows easier patch cord routing to the
front of adaptors
High DensityUp to 12 modules in 2U – 96 CWDM
channels
Rear ManagementOptional accessory for
sliding management allows front and rear
management, i.e. trunks and patch cords Part no:
UHD2URMBA
Front and Rear Installation Modules can be securely installed and fixed inside the chassis by an easy access latching mechanism.
Each module can be installed from the front or rear
Ultra High Density
Ultra High Density 12 Module Chassis 19” 2U with Front Door .
Part Number: UHD-2UFD
Ultra High Density 1U Sliding Management Tray.
Part Number: UHD-SLMAN01
2U Rear Management Bar Accessory side brackets included only when purchased without a chassis.
Part Number: UHD-IM2U03
1U and 2U Ultra High DensityChassis System and Accessories
Ultra High Density 5 Module Chassis 19” 1U with Front Door and Rear Management.
Part Number: UHD-1UFDRM
Ultra High Density 1U Front ManagementBar.
Part Number: UHD- 1UCABLEBAR01
Ultra High Density Installation Kit, 0 Module.
Part Number: UHD-2UFD
Ultra High DensityUp to 5 Modules in 1U
Up to 12 Modules in 2U
Secure Mounting MechanismModule is securely fixed inside the panel to
install patch cords
Fiberworks Ultra High Density CWDM ModulesFeature Overview
Part Number: U-CMUX-8+1-4761-MLU
Fiberworks Ultra High Density 8+1 CWDM Mux+Demux ModuleWith Monitor Ports
FEATURES
Ultra compact - 5 modules fit in 1U in 19" rack Coarse WDM in compliance with ITU-T G.694.2 8 CWDM channels 1470 nm – 1610 nm with 20 nm spacing 1310 nm wideband/upgrade port Two 2% monitor ports for easy troubleshooting Based on thin film optics with epoxy free optical path Protocol transparent (support 1G, 10G etc.) LC/UPC connectors
DESCRIPTION
This ultra compact CWDM multiplexer/demultiplexer covers the 8 most commonCWDM channels. Its 1310 nm wideband port can be used for legacy 1310 nm equipment or 8 more CWDM channels in the lower band. Monitor ports ensures easy troubleshooting without downtime and the color coding helps in the installation process reducing the chance of errors.
Fiberworks Ultra High Density 8 channels CWDM Mux+Demux Module,Low Band C29-C43, LC/UPC
FEATURES
DESCRIPTION
Part Number: U-CMUX+8-LB2943-LU
Ultra compact - 5 modules fit in 1U in 19" rack Coarse WDM in compliance with ITU-T G.694.2 8 CWDM channels 1290 nm – 1430 nm with 20 nm spacing To be used standalone or together with CMUX-8+1 to create a 16-
channel system Based on thin film optics with epoxy free optical path Protocol transparent (support 1G, 10G etc.) LC/UPC connectors
This compact CWDM multiplexer/demultiplexer covers the 8 CWDM channels in the lower 1310 nm band. Together with the F-CMUX-8+1 it creates a 16-channel CWDM system. The color coding helps in the installation process reducing the chance of errors.
Ryensvingen 15, N-0680 Oslo - NorwayTel: +47 23035330E: [email protected]