A ready-to-use wear plate fabricated from Carbon Steel platewith single or multi-layer fusion welded coating.
42
EWAC Wear Plates
Wear Plate Dimension:
Unique Features:
Note:
a) Base Plate Dimension: 1220 x 2740mmb) Base Plate Thickness: 5mm and abovec) Cladding Thickness: 3mm and above
Manufactured using 3 axis robot welding technique and controlled ‘cool’ welding process.
Overlay with a dense, extremely tough and consistent microstructure.
Cladding with low dilution, uniform hardness and exceptional wear properties.
Stress-relief cracks perpendicular to the welding direction, which does not propagate to the base metal.
In addition to the standard plate, specific shape & size of the pate can be cut, bend and fabricated as per requirement.
•
•
•
•
EDP - 550 EDP - 950EDP - 750EDP - 650
Typical Application:
Description:
Hardness:
Liners / Components which are subjected to Abrasion / Impact (Screens in Steel Industry)
Cr-C System for good abrasion andmoderate impact applications upto
0250 C
54-58 HRc
Earth moving bucket BLT ChuteBlade Liner for Fan impellerTranser Chute
Typical Application:
Description:
Hardness:
Liners / Components which are subjected to severe Abrasion (Screens in steel industry / Fan casting / VRM liners etc).
Cr-B-C System for high abrasion and low impact applications upto
0250 C
58-62 HRc
Typical Application:
Description:
Hardness:
Liners / Components which are subjected to high Abrasion / Impact.
Cr-Nb-C System for severe abrasion andmedium impact applications upto
0450 C
58-64 HRc
Typical Application:
Description:
Hardness:
BLT d i s t r ibu t ion chutes / MTA plates, Hot gas ventilators, hot gas ducts / pipes.
Complex carbide system for severe abrasion and erosion applications upto
0650 C
58-64 HRc