ESSENTIAL ITEMS ACCESSORIESA C C E S S C O M M U N I C AT I O N I D E N T I F I C AT I O N L I G H T I N G P R O T E C T I O N S A F E T Y S T O R A G E P
B-0
272-
C
ESSENTIAL ITEMS ACCESSORIES
PB
-027
2-C
VARIANTPART
NUMBERMORE INFO
Access Ladder for Level
1-3 Minecorp TraysM80000011S PB-0188
Ensures safe access onto a tray every time. The ladder is securely mounted through the tray floor. When in use the operator will always have a minimum of three points of contact to the vehicle at any point in time.
THREE POINT ACCESS LADDER
The kit comprises of 4 high visibility grab handles and a heavy duty, fully welded rear step. Designed specifically for the Ford PX Ranger Cab Chassis.
REAR STEP & THREE POINT ACCESS
Specifically designed for the Ford PX Ranger, this accessory is available to order individually for the left hand side or right hand side of the vehicle. The steps features a large checker plate platform, which is securely riveted to the frame of the step for superior strength.
SIDE STEP LHS / RHS
The kit consists of a heavy duty, powder coated steel rear step, and a safety yellow powder coated slip resistant steel tread.
STEP SINGLE TREAD PLATE
A C C E S S & C O M M U N I C AT I O N S
VARIANTPART
NUMBERMORE INFO
Full kit - with Towbar M79000234/S
PB-0196Full kit - no Towbar M79000386/S
Rear Step - with Towbar M79000310/S
Rear Step - no Towbar M79000387/S
VARIANTPART
NUMBERMORE INFO
Single Step with Tread Plate (includes mounting
bracket and bolt kit)T80070007/S PB-0300
VARIANTPART
NUMBERMORE INFO
Extensive List for Single
and Dual Cab Ford PX
Rangers 2011+
Various PB-0262
Minecorp’s Guard Mount Aerial Brackets give you the option of mounting an aerial to your vehicle in a quick and easy manner. The mount bolts through OE holes under the bonnet and anti-abrasive tape is supplied to ensure no rubbing occurs to the bodywork.
GUARD MOUNT AERIAL BRACKETS
Designed specifically for the Toyota Hilux 2015+ and made from tough yet light weight 2.5mm steel, Minecorp’s Radio Handset Mount sees the UHF/VHF microphone mounted unobtrusively, yet clearly visible and easily accessible below the drivers side corner of the windscreen.
RADIO HANDSET MOUNT
Minecorp’s new phone cradle mounting bracket system has been designed to allow mounting of the latest in phone cradle technology from Bury. Specifically designed for use in the PX Ranger 2015+. This system mounts to the A-Pillar of the vehicle.
PHONE CRADLE MOUNT
VARIANTPART
NUMBERMORE INFO
Extensive List Various PB-0197
VARIANTPART
NUMBERMORE INFO
A Pillar Mount Kit
Suits Bury Cradle
for Toyota Hilux 2015+
M70000074/S PB-0236
VARIANTPART
NUMBERMORE INFO
Mount Bracket Only M70000075/S
PB-0255Mount Bracket and
Bury Phone Cradle with Baseplate
M70000090/S
ESSENTIAL ITEMS ACCESSORIES
PB
-027
2-C
I D E N T I F I C AT I O N
Reflective tape enhances vehicle safety by extending visibility from daylight to 24 hours. Most mine sites have reflective tape as part of their Fatal Risk Control Protocol. All reflective tape is edge sealed to prevent the ends of the tape peeling away from the vehicle.
REFLECTIVE STRIPING
The standard Minecorp light bar consists of stop, tail, indicator and reverse lights. It also includes a reverse alarm and amber beacon. The S/T/I/R lights are sealed LED units. The reverse alarm is a minimum of 82dB. The beacon is a strobe, class 1 output amber rotating beacon.
REVERSE ALARM
These two extension kits allow our flags to remain quick connect and are able to be pulled apart to fit inside the vehicle for added security.
FLAG HEIGHT EXTENSIONS
These safety flags are exclusive to Minecorp and are made from heavy duty fibreglass with stainless steel quick release fittings. Minecorp has available a variety of different brackets to assist in mounting a safety flag to your vehicle.
MINECORP FLAGS
VARIANTPART
NUMBERMORE INFO
300mm Flag Extension M63001007/S
PB-0056
600mm Flag Extension M63001008/S
VARIANTPART
NUMBERMORE INFO
1500mm Flag M63001002/S
PB-0121
2400mm Flag M63001010/S
Flag/Aerial mounting brackets has been designed specifically for compatibility with Fords PX Ranger XLT Model with a OE Sports Bar fitted. Mounting is a straightforward task aided by the supplied hardware kit.
FLAG/AERIAL BRACKETVARIANT
PART NUMBER
MORE INFO
Mounting Bracket
Aerial Flag
Ford PX Ranger XLT
M63000104S PB-0184
VARIANTPART
NUMBER
Reverse Alarm Beeper-97 Db M63004001/S
Reverse Alarm Broad Band
Sound-82-97 Db Self AdjustingM63004003/S
Alarm Reverse Wired To Beacon M68009091/S
VARIANTPART
NUMBER
Reflective Tape Hi-Vis (Yellow Vehicle Sides) M62001407S
Reflective Tape Hi-Vis (Green Vehicle Sides) M62000007/S
Reflective Tape Hi-Vis (Red Rear Tailgate) M62001408/S
ESSENTIAL ITEMS ACCESSORIES
PB
-027
2-C
L I G H T I N G
Minecorp’s accessory mounting brackets have been designed for compatibility with fleet level 2 trays and the Minecorp Commercial Tray (MCT), tubular headboards, Rhino Racks and Minecorp Service Bodies.
BEACONS, MOUNTS & GUARDS
Lights on kits will significantly increase vehicle visibility when in use on a site. Enhances factory auto lights on function to activate light when key is turned in the ignition. The kit is simple to install and plugs into existing wiring and connectors, all of which are located in the vehicles cabin.
LIGHTS ON KITS
The standard Minecorp light bar consists of stop, tail, indicator and reverse lights. It also includes a reverse alarm and amber beacon. Minecorp’s Stealth Highlight Bar has been designed with discreet in mind. The bar has multiple mounting points to allow for a wide range of accessories.
LIGHT, MINE & STEALTH BARS
Minecorp’s engineered LED light has low power consumption but high light output. The metalised free form reflector and high output LEDs provide a bright, white light source and a wide flood beam to illuminate the work area.
WORK LIGHTS
Minecorp’s Radiance LED Safety Flags are made from heavy duty fibreglass with stainless steel quick release fittings. LED’s line the complete length of the flag giving off a bright red illumination for superior visibility and safety.
LED LIGHT FLAG
The Minecorp driving light kit contains everything you need to install two spot lights to your vehicles for use in harsh conditions. A hardened glass lens with clear acrylic covers allow the lights to be operated with the covers in position giving the ultimate in light protection.
DRIVING LIGHTS
VARIANTPART
NUMBERMORE INFO
Minecorp Beacon Mounting Brackets and
GuardsVarious PB-0295
VARIANTPART
NUMBERMORE INFO
Driving Light Kit M69001010/S
PB-0089Clear Protective Covers M69001012/S
LED Bar M67000240/S
VARIANTPART
NUMBERMORE INFO
Pair of Minecorp LED Work Lights
M68003011/S
PB-0130
LED Work Light M68000085/S
VARIANTPART
NUMBERMORE INFO
1500mm 12V Minecorp Radiance LED Safety
Flag M63000135/S PB-0263
VARIANTPART
NUMBERMORE INFO
Minecorp Light Bar M68001005/SPB-0233
Light Bar w Amber Beacon M68001001/S
Stealth Light Bar M68001058/S
PB-0213Fold Down Aerial Mounting Bracket Only M63000126S
VARIANTPART
NUMBERMORE INFO
Lights On Kits Various PB-0231
ESSENTIAL ITEMS ACCESSORIES
PB
-027
2-C
P R O T E C T I O N
When taking any vehicle off road there is a significant risk of damage to the often exposed underbelly. Key components are susceptible to being struck or damaged by rough terrain. The Underbelly Armour from Minecorp provides a strong and durable barrier to protect the vital workings of the vehicle.
UNDERBELLY ARMOUR
When taking any vehicle off road there is a significant risk of damage to the many exposed areas of the vehicle. Minecorp have developed numerous parts to protected essential components of the LC70 Series vehicles.
LC70 PROTECTION SERIES
Unrestrained cargo held in a tray can be lethal in the event of an incident that brings a vehicle to a sudden stop. Minecorp load guards are designed to help protect the occupants from any such event, meeting AS/ NZS 4034.1:2008 impact protection to 60kg.
Minecorp Load Restraint Tracks are the perfect accompaniment to a canopy build. The track can be cut to suit a variety of different fit outs.
LOAD GUARDS & RESTRAINTS
Feel safer reversing with increased awareness and clearly see the obstacles behind you. These sensor & camera systems provides a clear bright extra eye in your vehicles blind spot and also allows for a better view of the traffic behind while driving.
REVERSE SENSOR & CAMERA KITS
One component of the new (2017+) Holden Colorado found to be particularly vulnerable is the shift cable for the automatic transmission. In order to give piece of mind, Minecorp has developed a light weight yet tough, fully welded aluminium protection unit for this component.
TRANSMISSION SHIFT CABLE GUARD
Manufactured from 2.5mm aluminium for a sturdy and durable barrier. It features a two stage catch system that includes a lower barrier constructed of fine aluminium expander mesh and a second stage textile mesh protection the intercooler and radiator from finer particles.
RADIATOR GUARD
VARIANTPART
NUMBERMORE INFO
Ford PX Ranger / Mazda
BT50 2011+M60070034/S PB-0049
Toyota Hilux 2005+ M60500020/S PB-0060
Holden Colorado 2012+ M60130021S PB-0077
VARIANTPART
NUMBERMORE INFO
Transmission Shift Cable Guard
Holden Colorado 2017+
M60130047/S PB-0297
VARIANTPART
NUMBERMORE INFO
Protection Equipment for the Toyota
LandCruiser 70 Series Various PB-0185
VARIANTPART
NUMBERMORE INFO
Reverse Camera Twin Kit M67000226/S PB-0200
VARIANTPART
NUMBERMORE INFO
Radiator Seed Guard Ford PX Ranger M79070017/S PB-0209
VARIANTPART
NUMBERMORE INFO
Self Supporting Load Guards Various PB-0229
OE Headboard Load Guards Various PB-0230
Load Restraint Rack Various PB-0199
ESSENTIAL ITEMS ACCESSORIES
PB
-027
2-C
S A F E T Y
The Minecorp universal traffic control triangle mounting bracket is designed to hold the industries standard safety triangle with its deep containment design and security strap it will hold secure on the roughest roads. It includes holes for easy mounting to multiple vehicle locations.
SAFETY TRIANGLES
The Minecorp Extinguisher Bracket is suitable for 2.5KG or 4.5KG fire extinguishers. Manufactured from structural aluminium for weight reduction (half that of steel) and finished in black powder coat for superior corrosion protection.
FIRE EXTINGUISHER & BRACKET
Wheel chocks are used when a vehicle has the potential to roll, even though the vehicle may have the hand brake applied and be in gear. The ground may be wet and/or the vehicle parked on a slope. The wheel chock gives the vehicle added protection against rolling, and the driver piece of mind.
WHEEL CHOCKS AND MOUNT
Suit most tray or tubs and are perfect for restraining tools, luggage and any other awkward load. Minecorp nets are manufactured with ultra violet (UV) stable heavy duty 38mm polypropylene webbing in a tight weave pattern which provides high grip and security to the cargo being restrained.
MINECORP LOAD RESTRAINT NET
Bonnet opening on vehicles can be an awkward and strenuous activity. Minecorp have developed a gas strut bonnet lift kit to turn this task into a less taxing operation. Installation is quick and simple with the utilisation of purpose designed, CNC laser cut & pressed brackets.
BONNET GAS STRUT ASSIST KIT
Wheel nut indicators are used extensively by the transport industry as an enhancement and development of fleet safety road-worthiness procedures, daily walk-round inspection and defect reporting and scheduled maintenance requirements.
WHEEL NUT INDICATORS
VARIANTPART
NUMBERMORE INFO
Gas Strut Bonnet Assists for:
Isuzu D-Max Holden Colorado
Toyota Hilux Toyota LC 70 Series
Toyota LC 78/79 Series
Various PB-0305
VARIANTPART
NUMBERMORE INFO
Fire Extinguisher Brackets Contact Sales PB-0017
VARIANTPART
NUMBERMORE INFO
Wheel Nut Indicators Contact Sales PB-0031
VARIANTPART
NUMBERMORE INFO
Wheel Chock and Mounts Various PB-0123
Ford Ranger 2015+ Wheel Chock Mounting
Adaptor Tub BodyM63000134/S PB-0235
VARIANTPART
NUMBERMORE INFO
Universal Triangle
HolderM63000039/S
PB-0054
Triangle - Set of Three M63040001/S
VARIANTPART
NUMBERMORE INFO
Load Restraint Nets Various PB-0096
ESSENTIAL ITEMS ACCESSORIES
PB
-027
2-C
The crow bar holder is made from HA520 mild steel with an internal 6mm steel plate to restrain the crow bar head from moving out of reach when place in the holder. It has an 8mm heavy duty gravity driven end cap to safely keep the crow bar inside.
CROWBAR HOLDER
The universal design of the Minecorp Ladder Rack is compatible with steel and aluminium trays with head boards. Manufactured from steel for strength and durability and are zinc plated for high corrosion resistance. Integrated fold down load tie down point to each side of the rack gives easy safe load restraint.
UNIVERSAL LADDER RACK
This holder carries the standard 20 or 22 litre Water Container. Designed with folded ribs for extra strength, and zinc primed and powder coated for high corrosion protection. The easy universal fitment allows the holder to be mounted in many situations.
WATER JERRY CAN HOLDER
Minecorp can supply high quality, 30 litre tanks made from UV stabilised food grade polyethylene. The roto moulded one piece construction and heavy duty anchor points make them durable in all types of harsh weather and difficult terrain.
UNDERTRAY WATER TANK
The Spare wheel and tyre mounts have been designed to securely harness the spare wheel whilst taking up the minimum amount of space on the vehicles tray or in the boot. The supplied self locating centre cone is capable of holding a wide variety of different sized wheel centres.
SPARE WHEEL CARRIER
S T O R A G E
VARIANTPART
NUMBERMORE INFO
Suits 1650mm Length Crowbar M80000028/S PB-0045
VARIANTPART
NUMBERMORE INFO
Removable Rack to Suit 40mm x 40mm Headboard M66000022/S
PB-0055
Tube Rack 980mm High M80000045/S
VARIANTPART
NUMBERMORE INFO
Universal Spare Wheel Carrier M80000012/S PB-0086
Adjustable spare wheel mount M80000118/S PB-0181
Mitsubishi Outlander Phev Spare Wheel
CarrierM40354001/S PB-0302
VARIANTPART
NUMBERMORE INFO
Tray Mount M79000098/S
PB-0091Lock Cable And Padlock M79000129S
Steel Lock Arm & Padlock M79000144S
VARIANTPART
NUMBERMORE INFO
Various Combinations Various PB-0266
The Minecorp Universal Battery Carrier has been designed to be mounted under either a aluminium or steel tray but still be accessible should the battery require access. The innovative pivot system new to this product allows the user ease of fitment and access to the battery and its wiring.
UNDER TRAY AUX BATTERY BOXVARIANT
PART NUMBER
MORE INFO
Steel MCT Tray Mounted M67000107/S
PB-0092Steel Tray Mounted M67000104S
Aluminium Tray Mounted M67000105/S
ESSENTIAL ITEMS ACCESSORIES
PB
-027
2-C
With many vehicles now having restricted space under the bonnet, the second battery is securely housed in Minecorp’s under tray/canopy toolbox. The sealing of the underbody toolbox and cooler conditions provide the perfect operating environment for the battery system.
DUAL BATTERY MANAGEMENT
The Minecorp Tub Body Battery Enclosure sits neatly over the wheel arch. Accessories include Fuse Holder, Charger, Merit Socket, USB and 12V Socket. NOTE: Rocker switches and Jump Start Receptacle are not included. Only one Fuse Holder supplied. Not currently available for external sale - to be fitted by an auto electrician at Minecorp ONLY.
TUB BODY BATTERY ENCLOSURE
Neatly fitting under the bonnet of the Ford PX Ranger. A compressor provides many advantages, to run on board air activated equipment such as differential lockers. NOTE: Compatible with ARB CKSA12 & CKMA12 Compressors
AIR COMPRESSOR MOUNT
The Minecorp Gas Bottle Restraints are suitable for a range of gas bottles. They can be easily mounted in variety of locations and the brackets supplied in either galvanised or stainless steel.
GAS BOTTLE RESTRAINTS
Minecorp’s Refrigerator Slide Unit has been manufactured with galvanised steel and designed for maximum strength and durability is a must for remote travelling vehicles, those who are off site often and for long periods of time.
FRIDGE SLIDE
S T O R A G E
VARIANTPART
NUMBERMORE INFO
Various Combinations Various PB-0254
VARIANTPART
NUMBERMORE INFO
Battery Enclosure Over
WheelM67073001 PB-0308
VARIANTPART
NUMBERMORE INFO
Fridge Slide Unit suits
Fridge 695mm x 430mmM72000172/S
PB-0194
Fridge ARB 47L with tie
down kitM79020202S
VARIANTPART
NUMBERMORE INFO
Air Compressor Mount Kit for Ford PX Ranger /
Mazda BT50 2011+M79070016/S PB-0208
VARIANTPART
NUMBERMORE INFO
Gas Bottle Chocks Upper & Lower Pair - Suits D & E Size Bottles 160-
230mmM79000332/S
PB-0234
Gas Bottle Chock Upper & Lower Suit Single
Bottle 100-145mm DiaM79000333/S
The easiest way to carry long lengths is with the use of a ladder rack in conjunction with your Minecorp trays head board and/or removable hurdle, which gains greater use of tray space for a complete storage solution.
MCT LADDER RACK RANGEVARIANT
PART NUMBER
MORE INFO
Ladder Rack suits all 940H Service Boxes T66000080/S
PB-0125Ladder Rack (LC79 Only) T66000061/S
Front Hurdle PX Ranger 15+ M79000385S PB-0307
Front Hurdle LC79 16+ M79510300/S PB-0306
CONTACT MINECORP TODAY ON 1300 922 881 (+61 7 3723 1000 OUTSIDE OF AUSTRALIA)
© Minecorp Australia 2020 Member of RMA Group
minecorp.com.au [email protected]
ESSENTIAL ITEMS ACCESSORIES
PB
-027
2-C
Minecorp have developed a secure under floor storage for tray and canopy of the Ford PX Ranger (Single Cab), running the length of the underside of the canopy floor. Suitable for ladder storage (ladders to be under 2.3m in height) but capable for storage for a vast array of other longer length tools.
UNDERFLOOR STORAGE
Offers a secure and durable platform to safely give the operator increased storage option. Rail mounts run the length of the canopy roof to maximise storage capacity. Built in load rings provide a convenient solution to harnessing loads in place.
CANOPY ROOF RACK SYSTEM
Introducing Minecorp’s tub storage shelving system. A welcome addition to any work vehicle canopy. The range consists of different configurations, with additional shelves available to order separately.
HEAVY DUTY STORAGE TUBS
Minecorp’s workbenches are the perfect Service Box or Canopy Accessory. Ideal for placing your equipment on whilst working on site, or as a makeshift desk to place a laptop. The workbenches conveniently fold up using dual gas struts. The nylon hinges ensure a smooth operation every time.
WORKBENCHES
These Minecorp mounts are designed to be used with either the 125mm or 150mm vices to suit most off-site working conditions. The mounts have an easy to use pivot motion with a spring loaded locking bolt for placing the vice in a safe working or safe stored position.
VICE MOUNTS
S T O R A G E
VARIANTPART
NUMBERMORE INFO
Storage System for Aluminium Tray M79000264/S
PB-0205
Storage System for Canopy M79000270/S
VARIANTPART
NUMBERMORE INFO
Various Combinations Various PB-0206
VARIANTPART
NUMBERMORE INFO
Various Combinations Various PB-0093
VARIANTPART
NUMBERMORE INFO
Various Combinations Various PB-0201
VARIANTPART
NUMBERMORE INFO
Suits Canopy Builds M79000231/S
PB-0198
Suits 2500 Service Box M79000306/S
Slide out for 1200 Series Service Boxes M79000312/S PB-0212