Entry Level Science GCSE
Homework Booklet
Homework
Task
Date Set Date Due Parent
Check
Teacher
Check
1. Human Health
2. Inherited
Characteristics
3. Problems with
crude oil
4. How has the
Earth changed
over time?
5. Home
Insulation
6. Exam Revision
7. Exam Revision
Important Message for Parents and Carers
Dear Parents and Carers,
The teachers of Globe Academy believe that Home Learning is an integral part of developing every student and ensuring that they reach their academic potential.
Home Learning is important because it is point where school and home come together. It serves as a window through which you can observe your children’s education and express positive attitudes towards your children about their education and progress. As children grow older, homework and the amount of time engaged in homework, increases in importance. For Globe Academy staff, homework is an opportunity to provide additional academic instruction and further extend your child’s learning.
The benefits of Home Learning for you and your child are as follows:
(1) Practice and participation in home learning tasks can improve your child’s achievement.
(2) When homework is completed accurately and to a good standard, not only will your child’s general knowledge and grades improve but your child will also increase their mastery of basic academic skills, such as reading, writing, spelling and mathematics, something Globe Academy is committed to.
(3) Your child’s ability to bring an assignment home, gather and organise necessary materials to complete the assignment, return the assignment and receive a level/grade, strengthens his or her sense of personal responsibility for their learning.
(4) Time management skills are learned and developed.
(5) Further, when homework proceeds smoothly it can become (4) a positive aspect of your relationship with your child.
(6) Home Learning offers schools an opportunity to let parents know what their children are learning and keeps parents informed about work being studied and completed in class time.
(7) Home Learning helps the Academy achieve their overall mission of improving your child’s achievement.
(8) Homework is the bridge that joins schools and parents. For parents there is the potential to gain a greater appreciation of your child’s education and achievement.
For these valid reasons we are asking that parents/carers work with us to ensure that your child completes their homework.
Your child will receive a homework booklet for each subject and we ask that all parents/carers ensure that the tasks in this booklet are completed on time and to a high standard. Together we can improve your child’s progress and attainment.
Please sign below to confirm your agreement to support Globe Academy by checking and ensuring your child completes their Home Learning Tasks each week. In addition please sign and comment if necessary, the Homework Record sheets also in this booklet.
Thank you in advance for your support. Do not hesitate to contact me with any queries or comments about Home Learning at Globe Academy.
Kind Regards
Ms. C. Fernandes
(Vice Principal)
Name of Student: ______________________________________________________
Learning Family: ______________________________________________________
Name of Parent/Carer: __________________________________________________
I agree to ensure that my child completes all the Home Learning Tasks in this booklet
on time and to a high standard.
Signature of Parent/Carer:
_______________________________________________________
Date: ____________________________
Home Learning Record
After completing each Home Learning task please complete the record boxes
below.
Task Details:
Student signature/comment:
Deadline date:
Parent signature/comment:
Date completed:
Teacher signature/comment:
Task Details:
Student signature/comment:
Deadline date:
Parent signature/comment:
Date completed:
Teacher signature/comment:
Home Learning Record
After completing each Home Learning task please complete the record boxes
below.
Task Details:
Student signature/comment:
Deadline date:
Parent signature/comment:
Date completed:
Teacher signature/comment:
Task Details:
Student signature/comment:
Deadline date:
Parent signature/comment:
Date completed:
Teacher signature/comment:
Home Learning Record
After completing each Home Learning task please complete the record boxes
below.
Task Details:
Student signature/comment:
Deadline date:
Parent signature/comment:
Date completed:
Teacher signature/comment:
Task Details:
Student signature/comment:
Deadline date:
Parent signature/comment:
Date completed:
Teacher signature/comment:
Home Learning Record
After completing each Home Learning task please complete the record boxes
below.
Task Details:
Student signature/comment:
Deadline date:
Parent signature/comment:
Date completed:
Teacher signature/comment:
Task Details:
Student signature/comment:
Deadline date:
Parent signature/comment:
Date completed:
Teacher signature/comment:
Homework 1
L.O. How do surfaces affect infrared radiation?
Success Criteria:
Recall dark, matt surfaces are good absorbers and good emitters of infra red radiation.
Explain that light, shiny surfaces are poor absorbers and poor emitters of infra red radiation.
State that light, shiny surfaces are good reflectors of infra red radiation.
Complete the sentences by using the words from the box below.
A d____________ m___________ surface is the best absorber of infra red radiation.
A l____________ s_____________ surface is the worst absorber of infra red radiation.
A light shiny surface is a good r__________________ of infra red radiation.
A dark matt surface is a good e__________________ of infra red radiation.
A light shiny surface is a poor r__________________ of infra red radiation.
A thermometer with a blackened bulb is a better a_______________ of infra red radiation than
one that has not been blackened.
Use the ideas above to explain each of the following.
A thermal blanket used to keep a marathon runner warm has a light shiny outer surface.
Sandwiches wrapped in shiny aluminium foil stay cool.
emitter reflector absorber radiator
light shiny dark matt object
The clothing for summer sports like cricket and tennis is often white.
Emitters and absorbers
Match the beginnings with the correct endings.
Beginnings Endings
Houses in hot countries are often painted white
it will radiate infra red energy more quickly
Solar panels on the roof of a house are painted black
better than a shiny surface
Electric fires often have a shiny metal sheet behind the heating element
light surfaces are poor absorbers of radiation
A car radiator is usually painted black because
so that they absorb as much solar radiation as possible
A matt surface absorbs infra red radiation
because light shiny surfaces are good reflectors of infra red radiation.
Extension: Independent Learning Imagine you have been stranded in the Desert. What kind of clothing would you want to wear to help you survive? Explain why; use the level ladder to help
Entry Level 1 Say that light surfaces reflect more infrared radiation than dark surfaces.
Entry Level 2 Explain that infrared radiation causes objects to heat up.
Entry Level 3 Link these ideas together and suggest a solution to clothing worn in the desert.
Homework 2:
L.O. Particles and Energy
The use of kinetic theory to explain the different states of matter.
The particles of solids, liquids and gases have different amounts of energy.
All substances, solids, liquids and gases, are made from particles.
Match the description to the correct diagram
Description Container showing particles
Thermal energy transfer
These methods of thermal energy involve particles. There are four different ways energy can be transferred by particles:
1. Conduction
The particles in a solid are
very close together
vibrate in one place
usually stay in a fixed pattern
The particles in a liquid are
close together
move in all directions
have no fixed pattern
The particles in a gas are
far apart
move very quickly in all directions
move all over the container
This is the process of transferring thermal energy through solid material without any visible
change in the motion (movement) of the particles of the material
2. Convection
This is the process of transferring thermal energy by the movement of the fluid (liquid or gas)
through which thermal energy is being transferred
3. Evaporation
This is the process of transferring thermal energy to a liquid causing the particles to be converted to a gas.
4. Condensation
This is the process of changing gas to a liquid.
Which process is responsible for the thermal energy transfer in each of the cases below?
Answer each one by using the word conduction, convection or radiation.
1. The handle of a saucepan heats up when the pan and the contents are placed
on a cooker hot plate ___________________________
2. An object near to a gas fire becomes warm _____________________
3. The air in a room warms up when an electric heater in the room is switched on
________________________________________
4. Thermal energy travels between two objects in space ___________________________
5. Thermal energy travels through a metal bar _________________________________
6. Thermal energy travels through water _____________________________________
Homework 4
L.O. How do we insulate our houses? Mid Term
Assessment Revision
Students must know that:
Heating and insulating buildings.
U-values measure how effective a material is as an insulator.
The lower the U-value, the better the material is as an insulator.
Heating and insulating buildings
The diagram shows some of the ways in which thermal energy can be lost from a house.
Complete the following sentences by using the words from the box below.
double glazing loft insulation draught-proofing curtains tank radiator
doors roof cavity windows floors insulated walls
Heat Loss
Thermal energy is lost through the r____________, w____________, w____________ and the
d_____________ and f____________. To reduce heat loss, a building can be i____________.
To reduce heat loss through the roof, l____________ i____________ can be used.
C____________ wall insulation cuts down energy loss through the walls.
By d____________-p____________ windows and doors, energy losses can also be reduced.
To further reduce energy loss, d____________ g____________ can be used; this will reduce
the heat lost through windows.
Thick c____________ can also reduce energy loss.
Thermostatic r____________ valves can be used to prevent a building from over-heating and
so save energy. Also, insulating pipes and the hot water t____________ can also reduce heat
loss.
What is a U Value?
The U Value is a measurement of the rate of heat loss through a material.
The lower the U Value the better an insulator the material is.
For example, a single glazed window with standard glass will have a U Value of 5.6, while a double glazed window with standard glass will have a U Value of 2.8, and a triple glazed window will have a U value of 1.8.
Single glazed
U Value 5.6
Poor insulator
Double glazed
U Value 2.8
Good insulator
Triple glazed
U Value 1.8
Excellent insulator
Put these types of insulation in order of their ‘U Value’.
The best insulator should be number 1 and the worst insulator should be number 7.
Two have been done for you.
Type of Insulation U
Value
Best insulation based on U values
A. Hot water tank cover 4.0
1 B
B. Loft Insulation 0.2 2
C. Thick curtains 6.0
3
D. Double glazing 2.8 4
E. Draught-proofing 2.0 5
F. Hot water pipe lagging 4.5 6
G. Cavity Wall Insulation 0.3 7 C
Homework 5 Units of Electricity
Power rating of an appliance
The power rating of an appliance tells you the rate at which it transfers energy.
The more powerful a device, the faster the rate at which it will transfer energy.
We measure the power of a device in watts (W) or kilowatts (kW).
1 Kilowatt is equal to 1000 Watts.
Draw a ring around the appliance that will use the most energy when switched on for one
hour.
2kW fire 300W television
60W fan 1kW toaster
What is the power rating of the appliance above? _________________________
Complete the sentences by using the words from the box below.
The amount of electrical energy transformed depends on the p_______________ of the
appliance and the length of t_______________ for which it is switched on.
Heaters usually have a h_______________ power rating that the other e_______________
devices.
If you leave a light bulb s_______________ on when you are not using it, you will end up
paying for more units of electrical e_______________
The u_______________ of power is the watt or kilowatt.
230V 6A
2000W 50Hz
Heater
energy higher time switched power electrical unit
In some power stations an energy source is used to heat water. The steam produced drives a turbine
that is coupled to an electrical generator.
The photograph shows a power station.
Complete the sentences by using the words from the box below.
The energy source usually coal, o_______________ or gas is set alight.
The energy released is used to h_________ the water which produces the s_______________.
This drives the t_______________ which then turns the g ________________ which produces
e_______________ energy.
steam electrical oil turbine generator heat
Homework 6
L.O. What is energy efficiency? Part 1
When energy is transferred, only part of it may be usefully transferred, the rest is ‘wasted’.
Fill in the blanks in the table. Each missing word is a type of energy.
Devices Useful energy Wasted energy
Light bulb L_____________ from the H__________________ from
glowing filament. the filament to the surroundings.
Radio S____________ H____________
Television L____________and H____________
S____________
Hair dryer H____________ and S____________ and
K____________ H____________ of the motor.
A hot iron H____________ L____________
Food mixer K____________ S____________
H____________
Kettle H____________ of the water. H____________ transfer
from the element to the kettle
and S____________
Heater H____________ energy L____________ from
of the surroundings. the glowing element.
Loudspeaker S____________ H____________
Wasted energy is eventually transferred to the surroundings, which become warmer.
Where might the ‘wasted heat’ energy be in these examples?
Cycling
Driving a car
Light bulb in torch
The wasted energy becomes increasingly spread out and so becomes less useful.
As the cyclist pedals her energy turns the wheels.
Friction between tyre and the road changes some of the
energy into wasted h___________ energy which is lost to
its surroundings.
C____________ energy from the burning fuel powers the
car engine. However some of the chemical energy
increases the temperature of the engine. This wasted
h______ energy is lost to its surroundings.
Chemical energy from the torch’s battery is transformed
to e______________ energy. The filament in the light
bulb glows as useful light energy and wasted h_____
energy. The wasted heat energy is lost to its surroundings.
Choose the correct word from each pair in the sentences below.
Heat from barbeque
Sound from police siren
The further the light travels from the lighthouse the
more spread out it becomes so the (more / less)
useful it is.
The further the heat travels from the barbeque to
the food, the more spread out it becomes so the
(more / less) useful it is.
The further the sound the police siren travels the
more spread out it becomes so the (more / less)
useful it is.
Homework 7
L.O. Why are some things more efficient than others? Part 2
The greater the percentage of the energy that is usefully transformed in a device, the more
efficient the device is, e.g. the comparison between filament lamps and fluorescent tubes.
Complete the following sentences.
When devices transfer e____________, only part of it is usefully transferred to where
it is wanted.
The rest of the e______________ is transferred in some non-useful way or wasted.
Usually the e_____________ is wasted to the surrounding as h____________
Concept of energy conservation:
The energy that is w_________________ does not disappear; it is changed into a
non-useful form.
The non-useful energy in a light bulb is h____________ .
The non-useful energy in a liquidiser is h______________ .
Efficiency of some energy transfers. Energy is measured in units called joules (J).
Device and amount of energy supplied to it
Useful energy produced
Wasted energy
Filament light bulb 100 J 20 J as L___________ ______ J as heat
Low energy light bulb 25 J ___J as light 5 J as heat
Electric kettle 2000 J 1800 J to h____ the water
100 J to h______ the element
Electric drill 500 J 300 J as kinetic
(movement) energy 200 J as h_________
Television 200 J 20 J as light and sound 150 J as h________
The greater the proportion of e_______________ supplied to a device that is usefully
transferred, the m__________ efficient the device is.
A car engine is 20% e___________________ . This means that a lot more energy is
w_______________ than is used to drive the car forward.
A microwave is 60% efficient. This means that out of every 100 joules of electrical
energy supplied, 60 joules are used to heat the food. What happens to the other 40
joules?
Extension of Deep Learning:
In 2012 the European Union made it compulsory for the UK to only sell energy efficient light bulbs.
Can you explain why they may have done this, using the ideas above?
Homework 8: Revision Quiz
1. Which radiation transfers heat? a) Infrared b) Ultraviolet c) Visible Light
2. Which surfaces are good absorbers of heat? a) Dark surfaces b) Shiny surfaces c) Both
3. In which substance are the particles packed closest together?
a) Solid b) Liquid c) Gas
4. In which substance do the particles have the most energy?
a) Solid b) Liquid c) Gas
5. If a gas is cooled to a liquid, what change of state occurs? a) Evaporation b) Condensation c) Freezing
6. Which object will transfer the most heat to the surroundings?
a) Large surface area and large volume b) Small surface area and large volume c) Large surface area and small volume
7. What does a U-value measure?
a) The electrical conductivity of a substance. b) How good a heat insulator the substance is. c) The mass of the substance
8. What is the useful energy from a light bulb?
a) Heat b) Light c) Sound
9. What is the ’wasted’ energy from a light bulb?
d) Heat e) Light f) Sound
10. What does efficient mean?
a) The amount of useful energy generated by an appliance compared to the overall total energy. b) The total amount of energy generated. c) The cost of running the appliance.
11. What unit is electricity measured in by power companies? a) Kilowatt hours b) Volts c) Amps
12. What is the unit for power?
a) Amps b) Watts or Kilowatts c) Volts
13. In coal, oil and gas power stations, what turns the turbines?
a) Men b) Waves c) Steam
14. What does a turbine work?
a) Battery b) Generator c) Wires
15. Which of these are a renewable energy source?
a) Coal b) Gas c) Wind
16. Which of these power stations does not release carbon dioxide gas?
a) Coal b) Tidal Power c) Biofuel
17. Which of these is not a type of wave?
a) Transverse b) Inverse c) Longitudinal
18. Which of these has the longest wavelength in the EM spectrum?
a) Gamma b) UV c) Radio
19. Which of these EM waves are used in mobile phones?
a) Infrared b) Radiowaves c) Microwaves
20. Which of these provides evidence for the Big Bang?
a) Green shift b) Blue shift c) Red shift