ENCAP SYSTEMS
“Encapsulating and
Protecting building systems
for a stronger tomorrow”
www.theencapgroup.com
www.encapseal.com
INDUSTRY QUANDARIES
WATER INTRUSION THROUGH:
CRACKED STUCCO/BRICK/
CONCRETE WALLS
ROOFING COVERING MATERIALS
ELEVATED SLABS
BASEMENT WALLS
MULTI FAMILY, COMMERCIAL &
RESIDENDTIAL STRUCTURES
COMPETITIVE ADVANTAGES
Only Cementitious based coating system in the US
approved by the Health Departments and the EPA
in all 50 States.
More cost effective than traditional stucco
applications
Moisture resistant and allows for breathability
Extensive positive track record and testimonials
Moisture curing capabilities
Easy application process
Extensive color pallet
Extreme adhesion and compaction strength
Past Performance
Dewberry & Davis Study
Andros Island Navy Sub
Base
Patuxten Naval Air Station
Ohio Adjutant general Army
New Haven Court House
Authority
Oakland Housing Authority
Patrick Air Force Base
Veteran’s Hoapital-
Oakland,CA
Veteran’s Hospital- Vieira, FL
Veterans Hospital, Orlando, FL
F.D.O.T
Tyndall Air Base
Greater Orlando Aviation
Authority
Orlando Expressway Authority
Virgin Islands Port Authority/
Marine & Air
Federal Emergency
Management Agency
Homestead Air Base
Ft. Myer, Arlington, VA
Orlando Utilities
Commission, Orlando FL
Potential Projects
• Enviro Tubes
• Gabion Baskets
EnviroTubes
The Encap Group, LLC
EnviroTubes
Enviro-Tubes currently deployed,
shoreline protection and wetland re-
nourishment systems.
Currently for Enviro-Tube protection, we
are the only manufacturer of a coating
system that “significantly” adherers to the
petroleum based Bag Fabric.
Gabion Baskets
The Encap Group, LLC
U.S. ARMY CORPS OF
ENGINEERS (USACE)
TEMPORARY FLOOD PROTECTION
• SYSTEMS DEGRADATION
Examples of Past Performance
Wall Repair
The Encap Group, LLC
BRICK
RESTORATION/ENCAPSULATI
ON
Bethune Cookman College,
Dayton Beach, FL
The Encap Group, LLC
ENCAP SEALWater Intrusion Test
ASTM 1601
The Encap Group, LLC
RESULTS
.083 Gallons/ hour intrusion
(.375 Gallons/ hour intrusion considered
excellent)
The Encap Group, LLC
Asbestos
&
Lead
The Encap Group, LLC
Historical
renovation/preservationLead abatement/encapsulation
• Preserves a historical building’s
appearance while abating the lead base
paint or asbestos wall cladding
EXAMPLES OF PRODUCT USE
WATER PROOFING ON WALLS AND ROOFSOUC
Water Storage Tank,
Lake Highland
Orlando, FL
Encap Seal was applied as
a roof coating this water
Tank.
Allowing heavy
lift crane to traverse
without damage to
The coating.
As a water proof
coating on concrete /
stucco walls
INSULATED WALL PANELS
SYSTEM OVER T1-11 WOOD
SIDING
CONCRETE STRUCTURAL
REPAIRS
DENSE GLASS
PRODUCT SPECS Environmentally friendly
Designed to encapsulate lead based
paint.
Encapsulates some forms of asbestos
Adheres to most sub-straits
Encap Seal achieves maximum
strength of 4500 PSI in 28 days
Pro-Tec-Coat achieves maximum
strength of 6000 PSI in 28 days
NAICS CODES:
236115, 236117, 236220,
237310, 238350, 238990, 238110, 238140,
238310,
238340, 238910, 321114, 337110, 321911,
332323,
541310, 541320, 561790, 561730, 541620,
562910.
COMPETITIVE ADVANTAGESComparison Study of Landing and Patio water proofing systems
Products/ properties SONOGUARD VULKEM 350/351 ENCAP SEALProduct base/ make up Polyurethane/paint Polyurethane/paint Cementitious/mortar
Bonds to smooth surfaces no no Extremely well
Level of surface prep required extensive extensive- moderate minor
Water proofer yes yes yes
Allows for water vapor release no no yes
Available colors standard/limited standard/limited standard/unlimited
Installed applications 3 parts 2 parts 1 part
Tensile strength/ASTM C-780/D-412 752 320
530 PSI w/o fabric. W/
fabric exceeds 2500psi
Compressive strengths N/A 2200psi 4500psi
Adhesion/ peal strengths 275psi 30psi 406 psi
Color application topical applied through-out through-out
slip resistance topical applied sand topical applied sand product finish & texture
Moisture curing yes no yes
bridging limitations 1/16" max 1/16" max
1/2" or < w/o mesh
1/2" or> w/ mesh
Packaging/ coverage 50-80 sqft/gallon 40 & 100 sqft/gallon 40sqft/50lb bag
application thickness 25/25/20 wet mills 40 & 15 wet mills 1/8"-1/4" min.
abrasion resistance ASTM D-4060 1000 cycles 1000 cycles exceeds 1000 cycles
Weatherization/ UV exposure N/A N/A Impervious
Warranty N/A on product only 5 years L&M
Application Risks
Combustible liquid and
Vapor
Combustible liquid and
Vapor none
Requires maintenance agreement for
warranty Yes n/a No
Can be Pressure washed No No Yes
damaged by sharp objects, sand, gravel
metal yes yes no
Storage/shelf life 1 year/with proper storage n/a Unlimited w/proper storage
Clean up Reducer 990 or xylene Reducer 990 or xylene water
Manufacturers: BASF® Tremko, Industries The Encap Group, LLC
The Chemical company
ENCAP SYSTEMS
THE BEGINNING