Emergency
Emergency
DOT 1250 / E
13
Nipper / E
14
High 5® / E
16
Regency Bare
18
Regency Diffused
19
Deluxe Bare Batten
20
Deluxe Diffused
21
Unilux
22
LED Exit
2
Director
4
Director LED
6
Stingray
7
Stingray LED
8
Futcha 5 LED
9
LED Firefly
10
Firefly®
12
Emergency
ET Troffer
23
TR322
24
Condo
26
Hades I - LED / E
27
Guardian GR99
28
Guardian GR21
29
Weatherlux®
30
Warden LED
31
Vandal X IP65
32
Extreme
33
EXDN IP66
34
Condo WP
35
PWP™ & PWA™
36
SDW / SDWA
37
SDIP
38
Vandaguard®
39
Vandalux®
42
NXS
44
Maxi Pac IP65®
46
Metro Emergency
47
DIGINET
48
DIGINETDALI Emergency
Control Panel
49
DIGINETCable
ManagementOptions
50
Technical
51
Technical
2 Emergencymax dim(mm)
Product Codes
Code Version
Stylish, energy efficient LED exit luminaire compliant to Australian emergency lighting standards AS/NZS2293.
LED Exit
Features• 50,000 hour strip LED lamps• Polycarbonate housing • Slimline acrylic legend blade• Fully approved to AS/NZS2293 thermal
& illuminance requirements• Pictogram viewing distance is 24m• Surface & Recessed mount, Swivel action of panel for use
on angled ceilings• Low power consumption• A complete ‘one box’ solution including body diffuser and
LEDXM2P LED Exit with Pictogram Inserts
LEDXM2PB LED Exit with Black body and Green/ Black Theatre Pictogram
Accessories
LEDRB Recessed Bracket (cut-out: 380x88mm)
EXCB Cantilever bracket
LEDCM Conduit mount box
SKITLED Suspension Kit
99023330 Rod suspension white
99023360 Rod suspension black
DIRPPSS Pictogram inserts single sided
DIRPPDS Pictogram inserts Double sided
Spare Parts:
BP2SSC 2.4V NiCad, 2Cell
IP20
2.0kg 368 x 55 x 255
all pictogram inserts• Optional black ‘theatre’ body housing and picto inserts• Optional DALI monitored systems available
ApplicationsIdeal for emergency lighting application where aesthetics are everything, commercial office areas,hotels, shopping and cinema complexes, apartments, hospitals.
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6
LEDXM2P C0 D1.25 4 3.8 3.4 2.9 2C90 D1.25 4 3.8 3.4 2.9 2
All pictogram inserts
LED Swivel Action - Wall or Ceiling Mount
Conduit Mount BoxLEDCM
Cantilever BracketEXCB
3Emergency
Technical
4 Emergencymax dim(mm)
Traditional style exit luminaire complete with diffuser and pictogram legend compliant to AS/NZS2293.
Director
Features• Energy efficient lamp 10 watt fluorescent• Quick connect removable gear tray• Surface mount wall / ceiling• Injection moulded ABS housing and acrylic diffuser
with pictogram legend• Maintained, non-maintained and sustained available• Viewing distance 24m• Optional opal diffuser
IP20
2kg 380 x 160 x 220
• A complete ‘One Box’ solution including body, diffuser and all pictogram inserts
• Compliant to AS/NZS2293
ApplicationsGeneral purpose interior exit luminaire, commercial buildings, shops and interior carparks.
Product Codes
Code Version
Body less diffuser
DIR10M 10W Maintained
DIR10NM 10W Non-Maintained
DIR10S 2x10W Sustained
Pictogram wall mount single sided complete
DIR10MPSS 10W Maintained
DIR10SPSS 10W Sustained
DIR10NMPSS 10W Non-Maintained
Pictogram ceiling mount double sided complete
DIR10MPDS 10W Maintained
DIR10SPDS 10W Sustained
DIR10NMPDS 10W Non-Maintained
Accessories
DIRPSS Diffuser wall mount c/w Picto inserts
DIRPDS Diffuser ceiling mount c/w Picto inserts
DIRSS Diffuser wall mount opal only
DIRDS Diffuser ceiling mount opal only
DIRPPSS Director inserts packet, wall mount
DIRPPDS Director inserts packet, ceiling mount
WGWE Wall mount wire guard
WGCE Ceiling mount wire guard
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
DIR10MPSS C0 D5 7.8 8 8.1 8.2 8.2 8 7.7 7.3 5.7 1.6C90 E3.2 6 6.2 6.4 6.6 6.6 6.6 5.8 5.8
DIR10MPDS C0 D6.3 8.6 8.8 9 9.1 9.2 9.2 9 8.7 7.7 5.7C90 E5 6.6 7.2 7.4 7.8 8.2 8.4 8.4 8.2 7 6.8
DIR10SPSS C0 D8 9.4 9.7 9.9 10.1 10.3 10.4 10.3 10.2 9.5 8.3 6.1C90 E5 6.6 7.2 7.4 7.8 8.2 8.4 8.4 8.2 7 6.8
DIR10SPDS C0 D5 7.8 8 8.1 8.2 8.2 8 7.7 7.3 5.7 1.6C90 E5 6.6 7.2 7.4 7.8 8.2 8.4 8.4 8.2 7 6.8C180 D6.3 8.6 8.8 9 9.1 9.2 9.2 9 8.7 7.7 5.7
DIR10M + DIRDS C0 D10 10.2 10.6 10.9 11.1 11.4 11.5 11.6 11.6 11.2 10.3 8.9C90 E12.5 8 8.8 9.4 10 11 11.4 12 12.4 13 12.8 11.6
All pictogram inserts
Technical
5EmergencyMax Dim(mm)
5Emergency
Technical
6 Emergencymax dim(mm)
Traditional style Exit luminaire complete with energy efficient LED technology.
Director LED
Features• LED long life Exit sign, 50,000hrs• Quick connect removeable gear tray• Surface mount Wall/ Ceiling• Injection moulded ABS housing and acrylic diffuser
with Pictogram Legends• Maintained • Viewing Distance 24M• NiCad high temperature battery system
IP20
2.0kg 380 x 160 x 220
• Optional Opal Diffuser included• A complete ‘One Box’ solution including body,
diffuser and all pictogram inserts
ApplicationsGeneral purpose interior exit luminaire, commercial buildings, shops, carparks etc.
Product Codes
Code Version
DIRLEDPSS Director LED Picto Wall Mount
Maintained Exit
DIRLEDPDS Director LED Picto Ceiling Mount
Maintained Exit
Accessories
Diffusers:
DIRPSS Diffuser wall mount incl. Picto Inserts
DIRPDS Diffuser Ceiling mount incl. Picto Inserts
DIRSS Diffuser wall mount Opal only
DIRDS Diffuser Ceiling mount Opal Only
DIRPPSS Director Inserts Packet, Wall mount
DIRPPDS Director Inserts Packet, Ceiling mount
WGWE Wall mount wire gaurd
WGCE Ceiling mount Wire GaurdAll pictogram inserts
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6
DIRLEDPSS C0 E2.5 5.6 5.8 5.8 6 5.8 5.2 5.2 4.6C90 E2.5 5.6 5.8 5.8 6 5.8 5.2 5.2 4.6C180 B2.5 3.7 3.8 3.8 3.8 3.6 3.2 2.4
DIRLEDPDS C0 D4 7.2 7.3 7.3 7.3 7.2 6.9 6.5 5.8 3.1C90 D5 7.8 8 8.1 8.2 8.2 8 7.7 7.3 5.7C180 D4 7.2 7.3 7.3 7.3 7.2 6.9 6.5 5.8 3.1
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Technical
7EmergencyMax Dim(mm)
Product Codes
Code Version
A stylish, quick connect fluorescent exit luminaire compliant toAustralian emergency lighting standards AS/NZS2293.
Stingray
Features• Energy efficient lamp 10W fluorescent• Quick slide connect installation• Surface mount, wall or ceiling mounting options• Maintained or sustained circuits• Viewing distance 24M• Complete ‘one box’ solution, including diffusers and
Picto inserts
ST10MP 1 x 10W Maintained single sided
ST10M2P 1 x 10W Maintained double sided
ST10SP 2 x 10W Sustained single sided
ST10S2P 2 x 10W Sustained double sided
STT10MP 1 x 10W Maintained single sided theatre
ST10M 1 x 10W Maintained
Accessories
WGWE Wall exit wire guard
WGCE Ceiling exit wire guard
EXCB Cantilever bracket
99023330 Rod suspension white
99023360 Rod suspension black
DIRPPSS Pictogram inserts single sided
DIRPPDS Pictogram inserts double sided
Spare Parts
BP2S Battery 2.4V Nicad, 2 cell
99002656 lamp 10W Fluorescent
IP20
3.0kg 395 x 81 x 240
• Polycarbonate housing and diffuser• Compliant to AS/NZS2293
ApplicationsCommercial office areas, apartment buildings, shopping centres & arcades, cinema’s & halls and internal carparks.
Picto decals included
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5
ST10MP C0 E1.25 4.2 4.2 4 3.6 3C90 B1 2.4 2.2 1.8 1.1
ST10M2P C0 E2 5.2 5.2 5.4 5.2 4.6 4.8 4C90 B1.6 3.1 3.1 3 2.8 1.9
ST10SP C0 E1.25 4.2 4.2 4 3.6 3C90 B1 2.4 2.2 1.8 1.1
ST10S2P C0 E2 5.2 5.2 5.4 5.2 4.6 4.8 4C90 C2 4.1 4.1 4.1 3.9 3.3 2.6
Cantilever BracketEXCB
Tough polycarbonate lens
Technical
8 Emergencymax dim(mm)
Product Codes
Code Version
Modern & Stylish Quick connect LED Exit Luminaire complete with Diffuser and Pictogram Legend compliant to Australian Standards AS/NZ2293.
Stingray LED
Features• LED long life Exit sign, 50,000hrs• Quick slide connect installation• Surface mount Wall/Ceiling• Maintained operation• Viewing distance 24M• Complete One Box solution, including
diffusers and Picto inserts• NiCad high temperature battery system
STLED Maintained
STTLED Maintained Theatre
Accessories
WGWE Wall exit wire guard
WGCE Ceiling exit wire guard
EXCB Cantilever bracket
99023330 Rod suspension white
99023360 Rod suspension black
DIRPPSS Pictogram inserts single sided
DIRPPDS Pictogram inserts double sided
• Compliant to Australian Standards AS/NZ2293.• Polycarbonate housing and diffuser
ApplicationsCommercial office areas, apartment buildings, Shopping Centres & Arcades, Cinema’s & Halls, Caparks etc.
Picto decals included
Cantilever BracketEXCB
Polycarbonate housing and diffuser
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6
STLED C0 D4 7.2 7.3 7.3 7.3 7.2 6.9 6.5 5.8 3.1C90 D3.2 6.5 6.6 6.6 6.5 6.2 5.8 5.1 4.1C180 D4 7.2 7.3 7.3 7.3 7.2 6.9 6.5 5.8 3.1
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
IP20
3.0kg 395 x 81 x 240
Technical
9EmergencyMax Dim(mm)
Technical
Product Codes Dim
Code Version (mm)
The Futcha 5 is a high performance louvred luminaire for T5 lamp technology, incorporating LED emergency.
Futcha 5 LED
Features• Class leading efficiency enabling BCA and Greenstar
compliant designs• Suitable for Philips 25W ECO lamp• Full parabolic high purity aluminium louvres• Sturdy low profile body of phosphated steel with
high reflectivity• Electronic control gear, options for Analogue, DSI
and DALI• Sensors can be housed in the luminaire• Options for soft wiring
F5114MBA4EFA 1 X 14W T5 590 x 590 x 60
F5214MBA4EFA 2 X 14W T5 590 x 590 x 60
F5128MBA4EFA 1 X 28W T5 1189 x 590 x 60
F5228MBA4EFA 2 X 28W T5 1189 x 590 x 60
F5124MBA4EFA 1 X 24W T5 1189 x 590 x 60
F5224MBA4EFA 2 X 24W T5 1189 x 590 x 60
IP20
5.0kg 1189 x 294 x 60
• Plaster mounting with Pierlite Plaster Master Frame• 1.5m flex & 3 pin plug as standard• Energy efficient high output 3 watt LED / Non
Maintained• Compliant to AS/NZS2293
ApplicationsGeneral commercial interiors, office, corridors, retail stores and shopping centres.
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
FFRLED C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
FFRLEDBK C0 D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5C90 D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5
FFSLEDPK C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
FFSLEDAK C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
FFRLED / optical system
Power SpecificationsInput voltage and tolerance 230V AC +/- 10
Nominal frequency 50/60Hz
Nominal power 8.3 (16hr)
Consumption VA 2.9
Battery NiMH 1700mAh
Battery operating temp -20°C to +70°C
Battery Voltage 4.8V
Battery A/hr rating 1700mAhr (run time 2.5hr)
Battery Charging Dual rate ~170mA then pulse 1min/30min
FFRLED C0/C90 D25
Technical
10 Emergencymax dim(mm)
LED Firefly
Product Codes Dim Mass
Code Version (mm) (kg)
Versatile non-maintained LED emergency luminaire compliant to AS/NZS2293.
Features• Energy efficient high output 3 watt LED• Easy installation via 3 pin flex and plug• Recessed or surface mount options• Non corrosive polycarbonate housing and reflector• High performance lens system,
providing D25/D25 spacing• Low power consumption and maintenance• Fully self-contained control circuit, complete with
flex and plug• Optional DALI maintained systems available 114 mm Cutout non-maintained recessed model
FFRLED 3W White 140 x 48 0.35
FFRLEDBK 3W Black 140 x 48 0.35
114 mm Cutout maintained recessed model
FFRLEM 3W White recessed 140 x 48 0.35
Non-maintained Surface mount complete
FFSLEDPK 3W White Polycarbonate 159 x 85 0.48
FFSLEDAK 3W White Alloy 159 x 85 0.90
Maintained surface moutnt complete
FFRLEMAK 3W Surf. Mt Alloy Can Mtd 159 x 85 0.90
AccessoriesFFLEDVK Vandal resistant kit
FFSLEDPB Surface Mount Polycarbonate black can only
99023330 White Pole Suspension kit 1600mm
99023360 Black Pole Suspension kit 1200mm
FFSLEDDISC Suspension cover disc
99015840 Security screws (3 pack) for alloy SM CAN option
99023660 TORX SS Screw (3 pack) for FFSLEDAK
IP20
0.90kg 159 x 85
• Suspension kit and tamper proof options available• Compliant to AS/NZS2293• Circuit rated system life 50 000 hrs• Black theatre options available
ApplicationsCommercial and interior applications, coastal environments, apartments, shopping centres, hospitality, prisons and hospitals.
Power SpecificationsInput voltage and tolerance 230V AC +/- 10
Nominal frequency 50/60Hz
Nominal power 8.3 (16hr)
Consumption VA 2.9
Battery NiMH 1700mAh
FFRLED C0/C90 D25
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
FFRLED C0 C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
FFRLEDBK C0 CO D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5C90 C90 D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5
FFSLEDPK C0 C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
FFSLEDAK C0 C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
FFRLEM C0 CO D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5C90 C90 D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5
Tough polycarbonate body
Battery operating temp -20°C to +70°C
Battery Voltage 4.8V
Battery A/hr rating 1700mAhr (run time 2.5hr)
Battery Charging Dual rate ~170mA then pulse 1min/30min
FFLEDVK / Recessed vandal option
99023330 White Pole Suspension kit 1600mm 99023360 Black Pole Suspension kit 1200mm
FFRLEDBK / FFSLEDPB Black surface mount option
11Emergency
FFSLEDPK / Surface mount white
Technical
12 Emergencymax dim(mm)
Firefly®
Product Codes Dim
Code Version (mm)
Versatile non-maintained emergency luminaire providing an economical solution for conventional commercial applications.
Features• Lamp 8 watt tungsten halogen• Steel white polyester coated housing with highly
reflective white powder coat finish• ’Mouse trap’ mounting spring clips• Non-maintained operation• All recessed models are supplied with flex and plug• Filament failure indication standard on all models• Recessed or surface mounted• Small (85mm) or large (140mm) reflector
heads available• Compliant with AS/NZS2293
Non-maintained recessed reflector
FF608 8W T.H. NiMH 140
FF608TH 8W T.H. NiMH - Black theatre 140
FFC608 8W T.H. NiMH 85
FF608S 8W T.H. NiMH battery, split pack 85
FF608SLR 8W T.H. NiMH battery, split pack 140
FF608CR 8W T.H. Weatherproof / Coolroom 140
FF608LA 8W T.H. Lead acid - reflector 140
Non-maintained surface mount
FFSQ608 8W T.H. NiMH 200 x 46
FFSQ6085P1 8W T.H. NiMH Black 200 x 46
AccessoriesNon-maintained recessed reflector
FF608 8W T.H. NiMH 140
FF608TH 8W T.H. NiMH - Black theatre 140
FFC608 8W T.H. NiMH 85
FF608S 8W T.H. NiMH battery, split pack 85
FF608SLR 8W T.H. NiMH battery, split pack 140
FF608CR 8W T.H. Weatherproof / Coolroom 140
FF608LA 8W T.H. Lead acid - reflector 140
IP20
0.40kg 200 x 46
ApplicationsAll commercial and interior applications, apartments, shopping centres, hospitality, prisons and hospitals.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
FF608 C0 D12.5 11.1 11.5 11.8 12.1 12.5 12.7 12.9 13 12.8 11.3 7.6C90 D12.5 11.1 11.5 11.8 12.1 12.5 12.7 12.9 13 12.8 11.3 7.6
FFC608 C0 D12.5 11.1 11.5 11.8 12.1 12.5 12.7 12.9 13 12.8 11.3 7.6C90 D12.5 11.1 11.5 11.8 12.1 12.5 12.7 12.9 13 12.8 11.3 7.6
FF608S C0 D12.5 11.1 11.5 11.8 12.1 12.5 12.7 12.9 13 12.8 11.3 7.6C90 D12.5 11.1 11.5 11.8 12.1 12.5 12.7 12.9 13 12.8 11.3 7.6
FF608CR C0 D10 10.2 10.6 10.9 11.1 11.4 11.5 11.6 11.6 11.2 10.3 8.9C90 C10 7.3 7.7 8 8.3 8.8 9 9.1 9.2 9.1 7.5
FF608LA C0 D10 10.2 10.6 10.9 11.1 11.4 11.5 11.6 11.6 11.2 10.3 8.9C90 C10 7.3 7.7 8 8.3 8.8 9 9.1 9.2 9.1 7.5
FFSQ608 C0 D10 10.2 10.6 10.9 11.1 11.4 11.5 11.6 11.6 11.2 10.3 8.9C90 C10 12.1 12.6 13.4 13.1 13.9 14.1 14.6 14.6 14.6 13.8 11.5
Technical
13EmergencyMax Dim(mm)
Product Codes
Code Version
DOT 1250/EM is a high performance, energy efficient downlight with emergency capabilities.
DOT 1250 - Emergency
Features• Easy to install, including accessories• Maintained emergency circuit• Easy downlight removal system• High temperature thermo plastic control gear housing• High temperature lampholder, passivated, heavy gauge
pressed steel mounting legs• High purity, post anodised bright aluminium reflector• Electronic control gear• Energy efficient 2 x 26W 4 pin• Compact fluorescent lamps
1250/02/ECG/EM-DOT1250 2 x 26W Maintained
IP20
0.9kg 192 x 128
• Complete with flex and plug
ApplicationsOffices, boardrooms, foyers and reception areas, retail outlets. medical centres and hospitals.
175mm dia. hole cut out
128m
m
Remote Control Gear
Emergency Option available - tested to AS/NZS 2293.3.1995 Emergency Classification in accordance with Appendix CSection 3:- CO A8 C90 A10 IES file available C180 A6.3 on request
Product Code Classification Mounting Height in Metres
2.1 2.4 2.7 3 3.6 4 4.5 5 6
1250/02/ECG/EM-DOT1250 C0 A8 4.8 5.1 5.4 5.6 5.9 6.1 6.2 6.3 6.1
C90 A10 5 5.4 5.7 6 6.4 6.6 6.8 7 7
C180 A6.3 4.5 4.8 5 5.2 5.4 5.5 5.6 5.5 5
Technical
14 Emergencymax dim(mm)
Product Codes
Code Version
Versatile fluorescent batten with multiple options designed for use in general commercial interiors.
Nipper Emergency
Features• Energy efficient lamps 18W and 36W fluorescent• End to end mounting• Maintained, Non-maintained and Sustained available• Quarter turn ’quick release’ reflector and Quick release
diffuser end cap• Large 3 way tunnel terminal block• Rolled cable entry - no grommets required• Wide body version width is designed to cover flush mount
junction box installationsBare Batten
PN218M 2 x 18W Combined maintained
PN136M 2 x 36W Combined maintained
PN236M 2 x 36W Maintained
PN118NM 1 x 18W Non-maintained
PN136NM 1 x 36W Non-maintained
Diffused Batten
PND218M 2 x 18W Maintained
PND136M 1 x 36W Maintained
PND236M 2 x 36W Combined maintained
PND118NM 1 x 18W Non-maintained
PND136NM 1 x 36W Non-maintained
Accessories
Wire Guards Available
Diffuser Kits Available
Spare Parts:
BP4S Battery 4.8V NiCad, 4cell
P4S6 Battery 4.8V NiMH, 4cell (suits PN118NM)
IP20
3.4kg 1229 x 52 x 92
• Wire guards, reflectors and industrial options available• Compliant to AS/NZS2293
ApplicationsDomestic, retail stores and outlets, garages, food processing areas, change rooms and general commercial areas.
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
PN118NM C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
PN218M C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5180 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
PN136NM C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
PN136M C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
PN236M C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5180 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
15Emergency
Technical
16 Emergencymax dim(mm)
Product Codes
Code Version
Square sided batten with energy efficient T5 lamp technology and emergency lighting capabilities.
High 5® Emergency
Features• High performing photometric distribution in either bare or
diffused options• The body is a cold rolled steel channel, finished in white
polyester powder coat with UV stabilised polycarbonate plastic end caps
• Unique diffuser removal system for easy lamp change• Quarter turn quick release reflector• Large 3 way tunnel terminal block• Rolled cable entry no grommets required• Energy efficient T5 lamp fluorescent circuit• Compliant to AS/NZS2293• Wide body assembly is designed to cover flush mount
HI5228BE4M 28W Bare, Maintained
HI5228BE4S 28W Bare, Sustained
HI5228DE4M 28W, Diffused Maintained
HI5228D/4N 28W Diffused, Maintained
HI5228DE4S 28W, Diffused, Sustained
HI5128BE4M 28W 28W Bare, Maintained
HI5128BE4N 28W Bare, Non-Maintained
HI5128DE4M 28W Diffused, Maintained
HI5128D/4N 28W, Diffused, Non-Maintained
HI5114B/4N 4W, Bare, Non-Maintained
HI5114D/4N 14W, Diffused, Non-Maintained
Hi5214BE4MX1 14W, Bare, Combined- Maintained
HI5214DE4MX1 14W, Diffused, Combined- Maintained
IP20
4.0kg 1229 x 102 x 101
junction box installations• Optional light movement and IR sensor capabilities• True end to end mounting possible with knockouts
for wiring• Optional DALI maintained systems available
ApplicationsGeneral commercial interiors, factories, warehouses, shopping centres, stairwells and interior carparks.t
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Product Code Classification Mounting Height in Metres - Bare2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
HI5114B/4N C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
HI5114BE4M C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
HI5214BE4MX1 C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5180 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3
HI5128BE4N C0 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
HI5128BE4M C0 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
HI5228BE4M C0 D100 22.7 23.7 24.6 25.5 27 27.9 28.9 29.8 31.4 33.7 35.3C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3180 D100 22.7 23.7 24.6 25.5 27 27.9 28.9 29.8 31.4 33.7 35.3
HI5228BE4S C0 D100 22.7 23.7 24.6 25.5 27 27.9 28.9 29.8 31.4 33.7 35.3C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3180 D100 22.7 23.7 24.6 25.5 27 27.9 28.9 29.8 31.4 33.7 35.3
Product Code Classification Mounting Height in Metres - Diffused2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
HI5114DE4M C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
HI5214DE4MX1 C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5180 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3
HI5128D/4N C0 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
HI5128DE4M C0 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
HI5228D/4M C0 D125 24.5 25.6 27.5 28.3 30.1 31.2 32 34 35.5 37.8 40.8C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1180 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5
HI5228DE4S C0 D125 24.5 25.6 27.5 28.3 30.1 31.2 32 34 35.5 37.8 40.8C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1180 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5
Diffused model
Technical
Product Code Classification Mounting Height in Metres - Bare2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
HI5114B/4N C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
HI5114BE4M C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
HI5214BE4MX1 C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5180 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3
HI5128BE4N C0 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
HI5128BE4M C0 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
HI5228BE4M C0 D100 22.7 23.7 24.6 25.5 27 27.9 28.9 29.8 31.4 33.7 35.3C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3180 D100 22.7 23.7 24.6 25.5 27 27.9 28.9 29.8 31.4 33.7 35.3
HI5228BE4S C0 D100 22.7 23.7 24.6 25.5 27 27.9 28.9 29.8 31.4 33.7 35.3C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3180 D100 22.7 23.7 24.6 25.5 27 27.9 28.9 29.8 31.4 33.7 35.3
Product Code Classification Mounting Height in Metres - Diffused2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
HI5114DE4M C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
HI5214DE4MX1 C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5180 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3
HI5128D/4N C0 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
HI5128DE4M C0 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
HI5228D/4M C0 D125 24.5 25.6 27.5 28.3 30.1 31.2 32 34 35.5 37.8 40.8C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1180 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5
HI5228DE4S C0 D125 24.5 25.6 27.5 28.3 30.1 31.2 32 34 35.5 37.8 40.8C90 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1180 D160 26.6 27.8 28.9 29.9 31.7 32.8 34 35.1 37.1 40.24 42.5
17Emergency
Technical
18 Emergencymax dim(mm)
Technical
18 Emergencymax dim(mm)
Product Codes
Code Version
Premium square sided bare batten, wide body, finished in white powder coat with white ABS end caps allowing for easy end to end mounting.
Regency Bare
Features• Energy efficient T5 and T8 fluorescent lamps• End to End mounting Roll formed steel channel in white
polyester powder coat housing• Maintained, Combined Maintained, Combined Non-
Maintained or Non-Maintained• Lamp holder end caps have knock outs with moulding
provision in the diffuser end caps to enable wiring and flush end to end mounting
• Compliant to AS/NZS2293
RY118M 1 X 18W Maintained
RY118NM 1 x 18W Non-Maintained
RY218M 2 x 18W Combined-Maintained
RY218S 2 x 18W Sustained
RY136M 1 x 36W Maintained
RY236S 2 x 36W Sustained
RY158M 1 x 58W Maintained
RY158NM 1 x 58W Non-Maintained
RY258M 2 x 58W Combined Maintained
RY128M 1 x 28W T5 Maintained
RY128NM 1 x 28W T5 Non-Maintained
RY228M 2 x 28W T5 Maintained
RY228S 2 x 28W T5 Sustained
Accessories
White powder coated wire guard
PHWG218 suits RY118/218
PHWG236 suits RY136/236
PHWG258 suits RY158/258
Replacement Batteries
BP4S 4.8V Nicad, 4 cell to suit 18W/36W/58W
BP8S2 9.6V NiCad, 8cell to suit 28W and 35W
IP20
3.1kg 1227 x 101
ApplicationsCommercial interiors, retail, carparks, passageways, light industrial warehousing.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
RY118M C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
RY118NM C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
RY218M C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5180 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
RY218S C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5180 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
RY136M C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
RY136NM C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
RY236M C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5180 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
RY236S C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5180 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
RY158M C0 D80 21.1 22 22.8 23.6 25 25.8 26.7 27.5 28.9 30.9 32.1C90 C80 12.7 13.5 14.4 15.1 16.5 17.3 18.3 19.1 20.7 23.6 24.7
RY258M C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C100 13.4 14.3 15.2 16 17.5 18.4 19.4 20.4 22.1 24.8 26.7
Dim (mm)
1 x 18W T8 620 x 105 x 92
2 x 18W T8 620 x 105 x 92
1 x 36W T8 1228 x 105 x 92
2 x 36W T8 1228 x 105 x 92
1 x 58W T8 1529 x 105 x 92
2 x 58W T8 1529 x 105 x 92
Technical
19EmergencyMax Dim(mm)
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
RYD118M C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C20 8.9 9.4 9.9 10.3 11.1 11.5 12 12.3 12.8 13 12
RYD118NM C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C20 8.9 9.4 9.9 10.3 11.1 11.5 12 12.3 12.8 13 12
RYD218M C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C20 8.9 9.4 9.9 10.3 11.1 11.5 12 12.3 12.8 13 12180 D16 12.1 12.6 13.4 13.1 13.9 14.1 14.6 14.6 14.6 13.8 11.5
RYD218S C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C20 8.9 9.4 9.9 10.3 11.1 11.5 12 12.3 12.8 13 12180 D16 12.1 12.6 13.4 13.1 13.9 14.1 14.6 14.6 14.6 13.8 11.5
RYD136M C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
RYD136NM C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5
RYD236M C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5180 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
RYD236S C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5180 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
RYD158M C0 D80 21.1 22 22.8 23.6 25 25.8 26.7 27.5 28.9 30.9 32.1C90 C50 11.3 12 11.8 13.4 14.5 15.2 16 16.7 17.9 17.9 18.5
Product Codes
Code Version
Premium square sided diffused batten, wide body, finished in white powder coat with white ABS end caps allowing for easy end to end mounting.
Regency Diffused
Features• Energy efficient T5 and T8 fluorescent lamps• Tough Y12 acrylic diamond pattern diffuser retained
by white polycarbonate end caps• End to end mounting, roll formed steel channel in
white polyester powder coat housing• Maintained, combined maintained, combined non-
maintained or non-maintained• Compliant to AS/NZS2293• Lamp holder end caps have knock outs with
moulding provision to enable wiring and flush end
to end mountingRYD118M 1 X 18W Maintained
RYD118NM 1 x 18W Non-Maintained
RYD218M 2 x 18W Combined-Maintained
RYD218S 2 x 18W Sustained
RYD136M 1 x 36W Maintained
RYD236S 2 x 36W Sustained
RYD158M 1 x 58W Maintained
RYD158NM 1 x 58W Non-Maintained
RYD258M 2 x 58W Combined Maintained
RYD128M 1 x 28W T5 Maintained
RYD128NM 1 x 28W T5 Non-Maintained
RYD228M 2 x 28W T5 Maintained
RYD228S 2 x 28W T5 Sustained
Accessories
Replacement Batteries
BP4S 4.8V Nicad, 4 cell to suit 18W/36W/58W
BP8S 2 9.6V NiCad, 8cell to suit 28W and 35W
IP20
3.8kg 1227 x 108 x 101
ApplicationsCommercial interiors, retail, carparks, passageways, and light industrial warehousing.
Dim (mm)
1 x 18W T8 624 x 108 x 101
2 x 18W T8 624 x 108 x 101
1 x 36W T8 1232 x 108 x 101
2 x 36W T8 1232 x 108 x 101
1 x 58W T8 1533 x 108 x 101
2 x 58W T8 1533 x 108 x 101
Technical
20 Emergencymax dim(mm)
Product Codes
Code Version
Single and twin 36W bare tube fluorescent battens designed for ease of installation, and maintenance. The slim line body profile creates an elegant yet simple design.
Deluxe Bare Batten
Features• Energy efficient lamp 36W fluorescent• Slimline profile, powder coated non-discolouring
white housing• Durable polycarbonate non-discolouring end caps with
easy replaceable built in lamp holders• Captive cover plate 1/4 turn clip• Maintained, non-maintained and combined maintained
circuits available
DB136MEL 1 x 36W Maintained
DB236MEL 2x 36W Maintained
DB136NM 1 x 36W Non-maintained
Accessories
White powder coat wire guards
UNBWG136 suit DB136
UNBWG236 suit DB236
Replacement Batteries
BP4S 4.8V Nicad, 4 cell to suit DB136NM
BP4SNL 4.8V NiCad, 4cell
IP20
4.0kg 1227 x 68 x 90
• Wire guards available• Compliant to AS/NZS2293
ApplicationsGeneral commercial interiors, corridors, carparks, and warehousing.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
DB136M C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
DB136NM C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
DB236M C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C50 11.3 12 11.8 13.4 14.5 15.2 16 16.7 17.9 17.9 18.5C180 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
Dim (mm)
1 x 36W T8 1228 x 50 x 90
2 x 36W T8 1228 x 68 x 90
DB136MEL
DB236MEL
DB136NM
Technical
21EmergencyMax Dim(mm)
Product Codes
Code Version
Single and twin 36 watt diffused fluorescent battens designed for ease of installation, relamping and maintenance.
Deluxe Diffused
Features• Energy efficient lamp 36W fluorescent• Variable rate charge• Slimline profile, powder coated non-discolouring
white housing• Durable polycarbonate non-discolouring lamp holder end
caps with easy replaceable built in lamp holders• Tough Y12 diamond patterned acrylic diffuser retained by
polycarbonate end caps with unique clip design allowing true end to end mounting
• Captive cover plate 1/4 turn clip
DBD136MEL 1 x 36W Maintained
DBD136NM 1 x 36W Non-maintained
DBD236MEL 2 x 36W Maintained
DBD236SEL 2 x 36W Sustained
Accessories
Replacement Batteries
BP4S 4.8V Nicad, 4 cell to suit DBD136NM
BP4SNL Battery 4.8V NiCad, 4cell
IP20
4.5kg 1229 x 145 x 110
• Maintained, combined maintained, non-maintained and sustained circuits available
• Compliant to AS/NZ2293
ApplicationsGeneral commercial interiors, retail stores, shopping centres and warehousing.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
DBD136M C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C25 9.4 10 10.5 11 11.9 12.4 12.9 13.4 14 14.6 14.2
DBD136NM C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C25 9.4 10 10.5 11 11.9 12.4 12.9 13.4 14 14.6 14.2
DBD236M C0 D63 19.4 20.3 21.2 21.8 23 23.7 24.5 25.2 26.4 28.1 28.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5180 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3
Dim (mm)
1 x 36W T8 1229 x 86 x 110
2 x 36W T8 1229 x 145 x 110
DBD136MEL
DBD136NM
DBD236MEL
Technical
22 Emergencymax dim(mm)
Product Codes
Code Version
Surface mounted emergency fluorescent luminaire designed with energy efficient T8 technology in compliance with AS/NZS2293.
Unilux
Features• Energy efficient lamp 36W fluorescent• White powder coated steel body• Injection molded prismatic acrylic lens diffuser• Quick release access clips• Combined maintained operation• High performance prismatic lens• Compliant with AS/NZS2293• Low profile body design
EP236M 2 x 36W Combined maintained
Accessories
Spare Parts:
99001550 Replacement diffuser
BP4S Battery 4.8V NiCad, 4cell
IP20
6.2kg 1265 x 100 x 276
ApplicationsLow glare applications, schools, hospitals, TAFE’s, universities, libraries, retail stores, hospitals, banks, general office areas.
1265276
100
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
EP236M C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5C180 C50 11.3 12 11.8 13.4 14.5 15.2 16 16.7 17.9 17.9 18.5
Technical
23EmergencyMax Dim(mm)
Product Codes
Code Version
An economical solution using a variety of lens and louvre options providing a smooth and uniform light distribution.
ET Troffer
Features• Energy efficient lamp 36W fluorescent included• Recessed mount T-Bar system• Powder coated white steel body• Y12 Prismatic lens or optional Y19• Combined maintained operation• Simple to install• 1.5m flex and plug, flat earth• Provisions made for tandem mounting
ET236M 2 x 36W Combined Maintained Recessed, Less lamp and Y12 Diffuser
Accessories
98047100 K12 Prismatic diffuser
99003424 Y19 Prismatic diffuser
HFRM1200X300K12 Y12 Hinged frame diffuser panel
HFRM1200X300K19 Y19 Hinged frame diffuser panel
Spare Parts:
BP4S Battery 4.8V Nicad, 4 cell
IP20
4.3kg 1240 x 97 x 288
• Suitable for plaster mounting using the Pierlite plaster master frame
• Compliant to AS/NZS2293
ApplicationsCommercial interiors, office space and shopping centres.
1240288
97
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
ETT236M C0 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5C90 C50 11.3 12 11.8 13.4 14.5 15.2 16 16.7 17.9 17.9 18.5C180 C80 12.7 13.5 14.4 15.1 16.5 17.3 18.3 19.1 20.7 23 24.7
Technical
24 Emergencymax dim(mm)
Product Codes
Code Version
A simple yet stylish non-maintained emergency bulkhead designed for interior and protected exterior use applications.
TR322
Features• Energy efficient lamp 22W circular fluorescent• Surface Mount - wall / ceiling options• UV stabilised opal polycarbonate housing
and diffuser• Mains only versions available• Ideal for apartment corridors, requiring both general
and emergency lighting matched luminaires
TR322NM 1 x 22W Non-maintained
TR322 1 x 22W Mains operation only
Accessories
Spare Parts:
BP4S2 Battery 4.8V Nicad, 4 cell
IP43
1.4kg 250 x 103
• Compliant with AS/NZS2293
ApplicationsInterior and covered exterior use, stairwells & apartment buildings, under eaves and awnings.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
TR322NM C0 D10 10.2 10.6 10.9 11.1 11.4 11.5 11.6 11.6 11.2 10.3 8.9C90 D10 10.2 10.6 10.9 11.1 11.4 11.5 11.6 11.6 11.2 10.3 8.9
25Emergency
Technical
26 Emergencymax dim(mm)
Product Codes
Code Version
Classic styled luminaire designed for commercial applications in either maintained configuration or mains only.
Condo
Features• Lamp 32W circular fluorescent included• Surface mount wall/ ceiling options• Strong formed steel housing• Highly reflective white powder coat finish• Thick opal acrylic lens with wide distribution• Mains only or Maintained operation• Variable rate charging (variable rate charging)
CD32M 1 x 32W Maintained c/w circular lamp
CD32 1 x 32W Mains operation only
Accessories
Spare parts:
P4S62 Battery 4.8V NiMh, 4 cell
99002671 Lamp 32W Fluorescent Circular
IP40
2.0kg 410 x 105
• Ideal for apartment corridors, requiring both general and emergency lighting
• Compliant to AS/NZS2293
ApplicationsInterior, commercial, apartments, corridors, stairwells.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
CD32M C0 D16 12.1 12.6 13.4 13.1 13.9 14.1 14.6 14.6 14.6 13.8 11.5C90 D16 12.1 12.6 13.4 13.1 13.9 14.1 14.6 14.6 14.6 13.8 11.5
Durable formed steel housing
Technical
27EmergencyMax Dim(mm)
Product Codes
Code Version
Versatile emergency luminaire designed for a diverse range of installations requiring low maintenance and energy efficient LED technology.
Features• Lamp high output 3W LED• High performance lens system• Non-maintained operation and maintained• Low power consumption and maintenance• Integral gear and battery• Vandal/tamper proof• Switch mode power supply - reduced power consumption• Energy efficient lamp source• Alloy housing and bracket
HADONELEDM 3W Maintained LED Emergency
HADONELEDNM 3W Non Maintained LED Emergency
Accessories
FFRLED Replacement Non-Maintained emergency light
FFRLEDM Replacement Maintained emergency light
IP65
6.0kg 288 x 198 x 99
• Aluminium face trim• Durable powder coat paint finish
ApplicationsIdeal for feature emergency lighting applications or general emergency lighting around building exteriors and entry statements. Other applications include wall, column or post mounted in exposed positions or used under awnings and space frame structures.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
FFRLED C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
FFRLEM C0 D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5C90 D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5
HID version shown
Power SpecificationsInput voltage and tolerance 230V AC +/- 10
Nominal frequency 50/60Hz
Nominal power 8.3 (16hr)
Consumption VA 2.9
Battery NiMH 1700mAh
Battery operating temp -20°C to +70°C
Battery Voltage 4.8V
Battery A/hr rating 1700mAhr (run time 2.5hr)
Battery Charging Dual rate ~170mA then pulse 1min/30min
FFRLED C0/C90 D25
FFRLED / optical system
Hades I - LED Emergency
Technical
28 Emergencymax dim(mm)
Flood light emergency luminaire with adjustable beam for commercial applications, requiring aesthetic appeal.
Guardian GR99
Features• Lamp 2 x 9W tungsten halogen• Twin adjustable beam lamps• Polycarbonate body• Non-maintained operation• Complete with flex and plug• Compliant with AS/NZS2293• Integral gear
IP20
6.5kg 335 x 365 x 130
ApplicationsInterior commercial and industrial. Retail stores, public auditoriums, warehouse facilities, factories, airports, and school halls.
Product Codes
Code Version
GR99 2X9W EM FLOOD Non-Maintained
Accessories
Battery 99019703 6V Sealed Lead Acid
Note: Test report LL11247 for spacing distance available.
Test button adjustable beam lamps
Technical
29EmergencyMax Dim(mm)
Flood light emergency luminaire with adjustable beam for commercial applications.
Guardian GR21
Features• Lamp 2 x 21W tungsten halogen• Twin adjustable beam lamps• Formed steel housing• Non-maintained operation• Complete with flex and plug• Filament failure indication• Compliant with AS/NZS2293
IP20
6.5kg 335 x 365 x 130
• Individual test buttons• Integral gear
ApplicationsInterior commercial and industrial. Retail stores, public auditoriums, warehouse facilities, factories, airports, and school halls.
Product Codes
Code Version
GR21 2X21W Non-Maint EmergFlood.
Accessories
Battery 2 x 99019704 12V Sealed Lead Acid
Options Heads can be remote mounted.
Note: Test report LL11247 for spacing distance available.
Filament failure indication Twin swivel heads
Technical
30 Emergencymax dim(mm)
Product Codes
Code Version
A versatile IP65 fluorescent exit luminaire, designed for 16m viewing distance, in compliance with AS/NZS2293.
Weatherlux®
Features• Energy efficient lamp 8W fluorescent• Durable white polycarbonate body with quick connect
removable gear tray• Surface wall or ceiling mount • Pictogram 16m viewing distance complete
polycarbonate diffuser• IP65 weatherproof construction• Removable gear tray
WL8NM 1 x 8W Non-Maintained (body only)
WL8M 1 x 8W Maintained (body only)
WL8S 2 x 8W Sustained (body only)
Accessories
Pictogram Diffusers
WL01P Straight from here
WL02P Left from here
WL03P Right from here
WL04P Ceiling Picto single sided
WL08DPR Ceiling Picto double sided Right
WL06PR Ceiling Picto single sided Right
WL07DP Ceiling Picto double sided
WL05PL Ceiling Picto single sided Left
Note: Must specify diffuser required.
Spare parts:
BP2S 2.4V NiCad, 2 cell
IP65
3.0kg 368 x 102 x 150
• Tamper proof screws available as an option• Maintained, non-maintained and sustained circuits available
ApplicationsDamp environments, warehouses, production facilities, car parks, schools and coastal areas.
Choice of picto decals available
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
WL8M + WL01P C0 D8 9.4 9.7 9.9 10.1 10.3 10.4 10.3 10.2 9.5 8.3 6.1C90 E5 6.6 7.2 7.4 7.8 8.2 8.4 8.4 8.2 7 6.8
WL8S + WL01P C0 D10 10.2 10.6 10.9 11.1 11.4 11.5 11.6 11.6 11.2 10.3 8.9C90 C10 7.3 7.7 8 8.3 8.8 9 9.1 9.2 9.1 7.5C180 E3.2 6 6.2 6.4 6.6 6.6 6.6 5.8 5.8
WL8M + WLO C0 D12.5 11.1 11.5 11.8 12.1 12.5 12.7 12.9 13 12.8 11.3 7.6C90 E12.5 8 8.8 9.4 10 11 11.4 12 12.4 13 12.8 11.6
Technical
31EmergencyMax Dim(mm)
Product Codes
Code Version
Weatherproof IP65 exit luminaire designed with energy efficient LED technology housed in a rugged vandal resistant casing.
Features• High output strip LED• Ceiling or wall mount• Robust steel fabrication with UV resistant powder coating• Low power consumption and maintenance• Integral gear and battery• New slim, aesthetic and practical design• One box solution, complete with all Picto inserts• Special design applications available• Tough LEXAN diffuser
WELED2VM24 weatherproof LED exit, vandal resistant,
pictogram - 24m viewing distance
WELED2VM24B weatherproof LED exit, theatre, vandal
resistant, pictogram
WELED2VM24R weatherproof LED exit, remote gear,
vandal resistant, pictogram
WELED2VM40 weatherproof LED exit, vandal resistant,
pictogram - 40m viewing distance
Black theatre WELED2VM24X1
Remote WELED2VM24X2
IP65
3.0kg 441 x 299 x 33
• Vandal/Tamper proof fixing available• Theatre version available
ApplicationsCommercial, external and industrial applications, railway tunnels and platforms, carparks, prisons, courts and mining.
391391WP LED Exit
441mm33mm
229mm 286mm
Power SpecificationsInput voltage and tolerance 230V AC +/- 10Nominal frequency 50/60HzNominal power 6.5WConsumption VA 11.1Battery NiMH 1800mAhBattery operating temp -20°C to +70°CBattery Voltage 4.8VBattery A/Hr rating 1800mAhr (run time 2.5hr)Battery Charging Dual rate ~170mA then pulsePower Factor 0.592 LPF
Robust steel fabricated body
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Warden LED
Technical
32 Emergencymax dim(mm)
Product Codes
Code Version
Vandal resistant emergency fluorescent exit luminaire designed for arduous environments in compliance with AS/NZS2293.
Vandal X IP65
Features• Energy efficient lamp 10W fluorescent• Strong die-cast aluminium housing coated in polyester
white powder coat• 6mm polycarbonate pictogram diffuser with 24M
viewing distance• Tamper proof security screws• Fully approved to AS2293 thermal
& illuminance requirements• Impact tested and approved
EVC210S 2x10W sustained
Accessories
Pictogram Diffusers
EVC01P Straight on from here
EVC01PL Left from here
EVC01PR Right from here
Note: Must specify diffuser required.
Spare Parts
BP2S Battery 2.4V Nicad, 2 cell
IP65
3.0kg 360 x 180 x 170
ApplicationsHigh risk, arduous environments, prisons, detention centres, public access areas, railway stations and heavy industrial areas.
Tamper proof tri-lobal screw
360mm
180mm
Strong die-cast aluminium housing
Choice of picto decals available
Technical
33EmergencyMax Dim(mm)
Product Codes
Code Version
Oversize jumbo exit luminaire designed for 32m viewing distances compliant to AS/NZS2293.
Extreme
Features• Energy efficient lamp 18W fluorescent• Steel - white polyester powder coated housing with
removable gear tray• Polycarbonate pictogram diffuser with 32m
viewing distance• Wall or ceiling mount options• Maintained, non-maintained and sustained available• Single or double sided viewing options• Compliant to AS/NZS2293
EX18M 1x18W Maintained
EX18NM 1x18W Non-Maintained
EX18S 2x18W Sustained
Accessories
Pictogram Diffusers
EX01P Straight on from here
EX02P Left from here
EX03P Right from here
WGWE18 Wall Exit wire guard
Note: For wall/ceiling mount, single sided - select and specify one diffuser panel
For ceiling mount double sided, select and specify two diffuser panels.
Battery
BP4S2 4.8V NiCad, 4CELL
IP20
3.0kg 640 x 290 x 83
ApplicationsLarge scale commercial environments, public areas, supermarket, department stores, convention, exhibition and entertainment centres, factories, warehouses and industrial sites.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
EX18M + EX01 C0 D6.3 8.6 8.8 9 9.1 9.2 9.2 9 8.7 7.7 5.7C90 E3.2 6 6.2 6.4 6.6 6.6 6.6 5.8 5.8
EX18M + 2xEX01 C0 D5 7.8 8 8.1 8.2 8.2 8 7.7 7.3 5.7 1.6C90 B6.3 5 5.3 5.5 5.7 6 6.1 6.1 6 5.4 4.1
EX18M + EX01P C0 D8 9.4 9.7 9.9 10.1 10.3 10.4 10.3 10.2 9.5 8.3 6.1C90 E4 6.2 6.6 7 7.2 7.4 7.4 7.2 6.6 7
EX18M + 2xEX01P C0 D6.3 8.6 8.8 9 9.1 9.2 9.2 9 8.7 7.7 5.7C90 E3.2 6 6.2 6.4 6.6 6.6 6.6 5.8 5.8
Convenient test buttons
Technical
34 Emergencymax dim(mm)
Product Codes
Code Version
Class 1 Zone 2 emergency exit luminaire designed for use in IIC gas, dust and ignition proof applications.
EXDN IP66
Features• Energy efficient lamp 10W fluorescent• Durable grey polycarbonate housing with
polycarbonate picto diffuser• Class1 Zone 2, Ex n llC, DIP, Zone 21 & 22• Maintained or Sustained circuits available• Viewing distance 24M• Surface wall mount only• Complies to AS/NZS2293
EXDN110- 1x10W Maintained c/w
EXDN210- 2x10W Sustained c/w
Accessories
Spare Parts:
BP2S Battery 2.4V NiCad, 2 Cell
Diffusers available upon request
IP66
5.0kg 390 x 130 x 190
• Convenient removable gear tray• Large, quick release diffuser screws• End to end conduit access
ApplicationsDesigned for class1, zone 2 applications.
390
190
130
390mm
190mm
130mm
Choice of picto decals available
Technical
35EmergencyMax Dim(mm)
Product Codes
Code Version
An IP65 bulkhead suitable for interior or exterior use, providing resistance to moisture, impact, corrosive dust environments.
Condo Weatherproof
Features• Energy efficient lamp 28W2D fluorescent• Surface mount• Body cast aluminium - available in white or black• UV stabilised, high-impact resistant, opal
polycarbonate diffuser• Silicon gasket for sealing integrity• Stainless steel, allen-head screws• Maintained and Non-Maintained operation
CD28MWT 1 x 28W 2D Maintained White
CD28MBK 1 x 28W 2D Maintained Black
CD28NMWT 1 x 28W 2D Non-Maintained White
CD28NMBK 1 x 28W 2D Non-Maintained Black
Accessories
Spare Parts:
BP4S Battery 4.8V NiCad 4cell
IP65
2.0kg 395 x 225 x 81
• Integral gear and battery compartment• Compliant to AS/NZS2293
ApplicationsWeatherproof applications, commercial exterior, hospitals and large strata residential.
360mm 175mmSilicon gasketPolycarbonate diffuser
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
CD28M C0 D8 9.4 9.7 9.9 10.1 10.3 10.4 10.3 10.2 9.5 8.3 6.1C90 D8 9.4 9.7 9.9 10.1 10.3 10.4 10.3 10.2 9.5 8.3 6.1
Technical
36 Emergencymax dim(mm)
Product Codes
Code Version
Corrosion resistant GRP weatherproof fluorescent luminaire designed with high performance T5 and T8 optics.
PWP™ & PWA™
Features• Lamp 18W T8, 36W T8,14W T5, 28W T5, 35W T5• Tough corrosion resistant glass-fibre reinforced
polyester body• UV stabilised high impact polycarbonate
lens (optional acrylic)• Removable steel gear tray/reflector• Polyurethane machine poured foam gasket• Tamper resistant stainless steel (PWP) or polycarbonate
(PWA) diffuser retaining clips• Internal ribbed lens prism• Optional IR and motion sensor capabilities
PWP218M 2 x 18W Combined Maintained
PWP218S 2 x 18W Sustained
PWP136M 1 x 36W Maintained
PWP136NM 1 x 36W Non-Maintained
PWP236M 2 x 36W Combined Maintained
PWP114M 1 x 14W T5 Maintained - wide body
PWP214M 2 x 14W T5 Combined Maintained
PWP128M 1 x 28W T5 Maintained - wide body
PWP228M 2 x 28W T5 Combined Maintained
PWP235M 2 x 35W T5 Maintained
Accessories
Spare Parts:
BP4S Battery 4.8V NiCad, 4cell suits 18W/36W T8
BP6S2 Battery 7.2V NiCad, 6cell suits 14W T5
BP8S2 Battery 9.6V NiCad 8cell, suits 28W & 35W T5
For acrylic models replace ‘P’ in the catalogue with ‘A’ i.e PWP114M becomes PWA114M
IP65
5.4kg 1500 x 172 x 108
• Optional DALI• Compliant to AS/NZS2293• 20mm grommet cable entry at one end• Maintained, non-maintained, combined maintained and
combined maintained available
ApplicationsGeneral weatherproof conditions, wet rooms, food processing areas, industrial plants, car parks.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
PWP218M C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
PWP136NM C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
PWP136M C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
PWP236M C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C32 10 10.7 11.3 11.8 12.8 13.4 14 14.5 15.4 16.4 16.5C180 D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5
Dim (mm)
1 x 18W T8 697 x 102 x 108
2 x 18W T8 697 x 172 x 108
1 x 36W T8 1307 x 102 x 108
2 x 36W T8 1307 x 172 x 108
2 x 35W T5 1500 x 172 x 108
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Technical
37EmergencyMax Dim(mm)
Product Codes
Code Version
Corrosion resistant GRP weatherproof fluorescent luminaire designed with high performance T8 Optics.
SDW / SDWA
Features• Energy efficient lamp 18W, 26W, 36W fluorescent• Tough corrosion resistant glass-fibre reinforced
polyester body• UV stabilised high Impact polycarbonate lens
(optional acrylic)• Polyurethane machine poured foam gasket• Stainless steel diffuser clips, screw lockable• Internal ribbed prism lens• 20mm grommet cable entry at one end• IP65• Optional DALI maintained
SDW218M 2 x 18W Combined Maintained
SDW218S 2 x 18W Sustained
SDW136M 1 x 36W Maintained
SDW136NM 1 x 36W Non-Maintained
SDW236M 2 x 36W Combined Maintained
SDW236S 2 x 36W Sustained
SDW128M 1 x 28W Maintained
SDW228M 2 x 28W Combined Maintained
Accessories
Replacement Batteries
BP4S 4.8V Nicad, 4 cell to suit 136NM/M and 236M/S
BP4S2 4.8V Nicad, 4 cell to suit 218M/S
For 45° watershed factory fitted to 36W and 58W acrylic
models suffix ‘WS’, ie. SDW236MWS
For Acrylic diffuser models suffix ‘A’ in catalogue number
after’SDW’136M ie. becomes SDWA136M
IP65
6.5kg 1270 x 177 x 115
• Maintained, combined maintained, sustained and non-maintained
• Food industries - watershed bracket available• Compliant to AS/NZS2293
ApplicationsGeneral weatherproof conditions, wet rooms, food processing areas, dairies, industrial plants, car parks and wharves.
Stainless steel clips
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
SDW218M C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5C180 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
SDW218S C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5C180 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
SDW136M C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
SDW136NM C0 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5
SDW236M C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5C180 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3
SDW236S C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5C180 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3
Dim (mm)
2 x 18W 657 x 198 x 125
2 x 36W 1267 x 198 x 125
Tough corrosion resistant glass-fibre reinforced polyester body
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Technical
38 Emergencymax dim(mm)
Product Codes
Code Version
IP66 emergency fluorescent luminaire designed for hazardous, and chemical environments.
SDIP
Features• Energy efficient lamp 18W and 36W fluorescent• Class 1 Zone 2, Ex n IIC Zone 21 & 22• Glass-fibre reinforced body• High impact polycarbonate diffuser with stainless
steel diffuser clips, screw lockable• IP66• Complies to AS/NZS2293• Supplied with mount brackets
SDIP218M-DIP 2 x 18W Combined Maintained
SDIP236M-DIP 2 x 36W Combined Maintained
Accessories
Replacement Batteries
BP4S 4.8V Nicad, 4 cell to suit 136NM/M and 236M/S
BP4S2 4.8V Nicad, 4 cell to suit 218M/S
IP66
5.4kg 1270 x 177 x 115
• Dual conduit access facilities• Combined-maintained operation
ApplicationsGrain processing and handling areas, wineries, coal storage and handling sites, wharves and arduous environments.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
SDIP218M-DIP C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5C180 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
SDIP218M-EXN C0 D50 18 18.7 19.4 20.1 21.2 21.8 22.5 23.2 24.2 25.4 25.9C90 C40 10.6 11.3 11 12.6 13.6 14.3 15 15.6 16.6 17.9 18.5C180 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
SDIP236M-DIP C0 D63 19.4 20.3 21.2 21.8 23 23.7 24.5 25.2 26.4 28.1 28.9C90 C50 11.3 12 11.8 13.4 14.5 15.2 16 16.7 17.9 17.9 18.5C180 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
SDIP236M-EXN C0 D63 19.4 20.3 21.2 21.8 23 23.7 24.5 25.2 26.4 28.1 28.9C90 C50 11.3 12 11.8 13.4 14.5 15.2 16 16.7 17.9 17.9 18.5C180 D40 16.7 17.4 18 18.6 19.6 20.1 20.8 21.3 22.1 23 23.1
Technical
39EmergencyMax Dim(mm)
Product Codes
Code Version
Low profile IP66 fluorescent weatherproof luminaire designed for hostile and vandal prone environments.
Vandaguard®
Features• Energy efficient lamp 18W, 36W fluorescent• Pressure die-cast marine grade LM20 aluminium
body with separate battery compartment• Robust reeded or clear prismatic
polycarbonate diffuser• Complete with security screws, removable gear tray
and single one piece gasket• Low profile IP66 protection• Maintained, combined-maintained, combined non-
maintained or non-maintained• Complies to AS/NZS2293
VPF118M 1 x 18W Maintained
VPF118NM 1 x 18W Non-Maintained
VPF218M 2 x 18W Combined Maintained
VPF218S 2 x 18W Sustained
VPF136M 1 x 36W Maintained
VPF136NM 1 x 36W Non-Maintained
VPF236M 2 x 36W Combined Maintained
VPF236S 2 x 36W Sustained
Accessories
Spare Parts:
99010318 Battery 9.8V NiCad, 4 cell
BP4S Battery 4.8V NiCad, 4 cell stick
IP66
8.5kg 1310 x 140 x 80
• Dual conduit access• Optional DALI maintained• Optional motion and IR sensor capabilities
ApplicationsPrisons, subways, railway stations and underground carparks.
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
VPF118M C0 D16 12.1 12.6 13.4 13.1 13.9 14.1 14.6 14.6 14.6 13.8 11.5C90 C16 8.3 8.8 9.3 9.7 10.3 10.7 11 11.3 11.6 11.3 9.6
VPF218M C0 D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5C90 C16 8.3 8.8 9.3 9.7 10.3 10.7 11 11.3 11.6 11.3 9.6180 D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5
VPF136M C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5
VPF136NM C0 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C20 8.9 9.4 9.9 10.3 11.1 11.5 12 12.3 12.8 13 12
VPF236M C0 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3C90 C25 9.4 10 10.5 11 11.9 12.4 12.9 13.4 14 14.6 14.2180 D32 15.4 16.1 16.7 17.2 18 18.5 19.1 19.5 20.2 20.7 20.3
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Secure access screws
Tough polycarbonate lens
Dim (mm)
1 x 18W T8 670 x 140 x 80
2 x 18W T8 670 x 140 x 80
1 x 36W T8 1310 x 140 x 80
2 x 36W T8 1310 x 140 x 80
Technical
40 Emergencymax dim(mm)
NEW IMAGE
40 Emergency
Technical
41EmergencyMax Dim(mm)
NEW IMAGE
41Emergency
Technical
42 Emergencymax dim(mm)
Product Codes
Code Version
Adverse and weatherproof IP66 fluorescent luminaire designed for hostile, industrial and vandal prone environments.
Vandalux®
Features• Energy efficient lamp 18W, 36W fluorescent• Pressure die-cast marine grade LM20 aluminium body
with (separate battery compartment, 18W only)• Heavy-duty reeded or clear prismatic
polycarbonate diffuser• Removable gear tray• Maintained, combined-maintained, combined non-
maintained or non-maintained• Complete with security screws and single piece gasket• IP66 protection• Standard finished chromate treated APO grey epoxy
powder coat
VP118M 1 x 18W Maintained
VP118NM 1 x 18W Non-Maintained
VP218M 2 x 18W Combined Maintained
VP218S 2 x 18W Sustained
VP136M 1 x 36W Maintained
VP136NM 1 x 36W Non-Maintained
VP236M 2 x 36W Combined - Maintained
VP236S 2 x 36W Sustained
Accessories - see Vandalux adverse section
Spare Parts:
99010318 Battery 4.8V NiCad 4 cell
BP4S Battery 4.8V NiCad 4 cell stick
IP66
6.3kg 1310 x 140 x 120
• Option safety orange body finish available• Complies to AS/NZS2293• Dual conduit access• Optional DALI• Optional motion and IR sensor capabilities
ApplicationsWeatherproof for hostile, industrial and vandal prone environments, railway stations, subways and car parks.
Product Code Classification Mounting Height in Metres2.4 2.7 3 3.6 4 4.5 5 6 8 10
VP118M C0 D16 12.6 13.4 13.1 13.9 14.1 14.6 14.6 14.6 13.8 11.5C90 C16 8.8 9.3 9.7 10.3 10.7 11 11.3 11.6 11.3 9.6
VP218M C0 D20 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5C90 C16 8.8 9.3 9.7 10.3 10.7 11 11.3 11.6 11.3 9.6180 D20 12.6 13.4 13.1 13.9 14.1 14.6 14.6 14.6 13.8 11.5
VP136M C0 D25 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C20 9.4 9.9 10.3 11.1 11.5 12 12.3 12.8 13 12
VP136NM C0 D25 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C20 9.4 9.9 10.3 11.1 11.5 12 12.3 12.8 13 12
VP236M C0 D32 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3C90 C25 9.4 9.9 10.3 11.1 11.5 12 12.3 12.8 13 12180 D32 14.7 15.3 15.7 16.5 16.9 17.3 17.7 18.1 18.2 17.3
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
Dim (mm)
1x18W T8 670 x 140 x 120
2x18W T8 670 x 140 x 120
1x36W T8 1310 x 140 x 120
2x36W T8 1310 x 140 x 120
43Emergency
Technical
44 Emergencymax dim(mm)
Product Codes
Code Version
Heavy duty IP65/67 bulkhead for adverse applications.
NXS
Features• Energy efficient lamp 18W compact fluorescent• Robust die cast aluminium body• Borosilicate glass diffuser• Non-Maintained operation• Ceiling or wall mount design• Complies to AS/NZS2293• Integral control equipment• 4 x M20 conduit access (industrial)• 4 x M25 conduit access (mining)
NEX118NM 1 x 18W Non-Maintained
Accessories
Spare Parts:
BP4S Battery 4.8V NiCad 4cell
NSXWG Wire guard
NSXV Visor
IP65/67
5.9kg 298 x 193 x 184
• Industrial version IP65• Mining version IP67
ApplicationsIndustrial sites, mine sites and adverse conditions.
298
184
193
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
NEX118NM C0 D20 13.1 13.6 14.1 14.5 15.1 15.5 15.8 16.1 16.4 16 14.5C90 D12.5 11.1 11.5 11.8 12.1 12.5 12.7 12.9 13 12.8 12.3 11.3
Borosilicate glass diffuser
4 x M20 conduit access (industrial)4 x M25 conduit access (mining)
45Emergency
Technical
46 Emergencymax dim(mm)
Product Codes
Code Version
Robust IP65 fluorescent bulkhead designed for weatherproof and adverse applications.
Maxi Pac IP65®
Features• Energy efficient lamp 18 watt compact fluorescent• Removable gear tray• Non-maintained operation or maintained• 20mm cable entry knockouts at both ends• Robust cast aluminium body• Reeded polycarbonate diffuser• Strong versatile bulkhead• Circular compression gasket• Complies to AS/NZS2293
LPC118M 1 x 18W Non-Maintained
LPC118NM 1 x 18W Maintained
Accessories
Spare Parts:
BP4S Battery 4.8V NiCad 4cell
IP65
3.7kg 315 x 220 x 161
• Integral control equipment• Ceiling or wall mount• Colour white
ApplicationsWeatherproof environments, factories, walkways, car parks, and industrial zones.
220 315
161
Product Code Classification Mounting Height in Metres2.1 2.4 2.7 3 3.6 4 4.5 5 6 8 10
LPC118M C0 D16 12.1 12.6 13.4 13.1 13.9 14.1 14.6 14.6 14.6 13.8 11.5C90 D8 9.4 9.7 9.9 10.1 10.3 10.4 10.3 10.2 9.5 8.3 6.1
Robust cast aluminium body
Reeded polycarbonate diffuser
Technical
47EmergencyMax Dim(mm)
Product Codes Dim Mass
Code Version (mm) (kg)
A versatile luminaire using an energy saving compact fluorescent lamp with self-contained emergency circuit.
Metro Emergency
Features• Glass filled Nylon moulded body for strength• Polycarbonate prismatic diffuser with reflector• Silicon gasket provides weather ingress protection• Modular heavy duty gear tray• Twist-off diffuser for easy lamp replacement• Fits Std diameter 34mm pipe spigot• Uses energy saving compact fluorescent lamp• Maintained unit with electronic module• Non maintained or Maintained with integral inverter• Universal bracket supplied with fitting
NON MAINTAINED
METROPLC18NM 18W PLC 490 x 170 x 180 3.0
METROPLC32NM 32W PLC 490 x 170 x 180 3.0
MAINTAINED
METROPLC18MEL 18W PLC 490 x 170 x 180 3.0
AccessoriesAll mounting brackets included.
BP4S2 18W / 32W Non-Maintained battery NiCad
97002252 18W Maintained battery NiCad
IP65
3.0kg 490 x 170 x 180
ApplicationsFor general security lighting around industrial areas, public amenities and high density housing projects. Also suitable for general lighting around mining infrastructure such as conveyors, loaders and gantries.
Wall Corner Pole
105mm 285mm
164mm 100mm
150mm
48Emergency
DIGINET is a simple, intelligent emergency lighting management system designed by industry experts to effectively manage and monitor the status of emergency lighting within a network. DIGINET utilises a DALI international open protocol to communicate between luminaires and the computer software.
Types of applications for a DIGINET system
• Commercial & industrial installations• Low rise office or apartment buildings• Multiple building campuses• Hospitals• Correctional facilities• Educational facilities• Health centres and aged care facilities• Centralised emergency light management
3 x typical system styles
FOOLPROOF INSTALLATIONThe DIGINET System is as simple to install as a non-monitored single point system, just install the emergency lights as per plans and by using a CMS type cabling connection method, the system should not be compromised by poor cable connection. The ‘plug & play’ type cabling will connect to a small wall mounted LCD display computer, then by simply commissioning each product into the computer the system is ready to go.
SELF MONITORINGDIGINET is self monitoring, it can diagnose system and product faults in readiness for maintenance access at either the 6 monthly test or anytime in between.
INDEPENDENT OR COMPLETE-YOUR CHOICEYou can choose whether to cable for an independent DIGINET Emergency Lighting Management system or a Complete DALI Lighting Management system, the cabling and connection remains the same simple method for both systems therefore both systems can connect to the same wiring loop. This will reduce Labor, Cost and confusion.
EASY SYSTEM CONTROLSThe DIGINET system features a unique LCD graphical user interface type computer to control and monitor. This is accessible via ethernet, LAN, WAN etc. The LCD control panel can be located in an electrical/data riser, front desk etc. and accessed on any PC via an allocated IP address over the internet.
SIMPLE AUSTRALIAN STANDARDS COMPLIANCEThe DIGINET emergency lighting management system makes compliance with AS2293.2 and various State and Local regulations very easy. The system is designed to run the required 6 monthly discharge tests, create maintenance logs and run compliance reports to assist in making sure that a crucial building safety system stays operational. The system provides reliable data that is not compromised by human error and makes it quick and easy to access.
Small projects <60 points
Medium projectsup to 120 points
Large projectsup to 600 pointsNB: For projects +600 units refer Pierlite Australia
Technical
49EmergencyMax Dim(mm)
Product Codes
Code Version
DIGINET DALI Touch Screen Control Panel
DIGINET DALI Emergency Control Panel
Features• Simple one touch control system• Automatic initiation and logging of tests• User friendly colour interface• On screen luminaires health status• Up to 120 emergency lighting points per panel • Interconnect up to 10 Panels using
Ethernet backbone• The DIGINET product has been designed in accordance
with International DALI standard IEC 62386.
99005257 DIGINET DALI Touch Screen Control Panel
Accessories
Power Supply
99005256 DALI PS1 Surf Remote (200MA)
99005255 PS DALI DIN Rail
IP20
0.92kg 200 x 150 x 20
ApplicationsSmall to medium commercial & industrial installations, low rise office or apartment buildings, multiple building campuses, small to medium public buildings, health centres and aged care facilities.
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
EXIT SIGN DALI PSU
24-48V DC10VA
DIGINETTOUCH SCREEN
CONTROLLER
DALI PSU EXIT SIGN EMERGENCY LIGHT
NL
DADA
DADA
EMERGENCY LIGHT
Technical
50 Emergency
Cable and Connector Technical specification:
Simplicity, flexibility and efficiency is the key to installation and interconnection of a DIGINET DALI management system.
DIGINET Cable Management Options
Features• Simplifies the wiring and provides
Plug & Play connectivity• 5 way hard and soft wiring solutions available• Reduce wastage in materials• Luminaires and interconnecting cables can be
installed at the same time• Combined lighting, power, control and
communication wiring eliminates the need for separate Data Cabling.
• Add Luminaires or Devices by simply plugging in.• Reduce the quantity and variety of wiring required
in an installation.
Mains 240VAC. 16A and 20A versions available 5 core wiring which typically consists of 3 x conductors for A, E, N and 2 x conductors for DALI (min 1.5mm2) allowing for up to 64 DALI Addresses over 300 metres.
Contact your local Pierlite office for further details
Applications5 way soft and hard wiring connectivity solutions are available for commercial, residential, infrastructure or industrial lighting applications.
It is highly recommended that in every installation, 5 core cabling such as 5 core round, 5 core flat or 5 core structured cabling solution is taken to each zone and then routed to each luminaire. This gives total flexibility and makes the project future proof.
CLIENT: GERARD LIGHTING
CONCEPT: 02.09.09
BRAND: iLP- INTELLIGENT LIGHTING SOLUTIONS
PRODUCT: iLP LOGO R
CONTACT: Vanessa Cotton
Custom Cartons
19 East Street
Brompton SA 5007
Tel: 08 8348 2967
Fax: 08 8348 2977
Email: [email protected]
5 core flat
QF1
QF1
QF3 Lead hard wired to fitting. 3x2.5mm(A,N,E) & 2x1.5mmDali.w
2
2
Light FittingQF5 Interceptor allowing splitting of circuits/new power supply.
QF3 & QFS3 hard wired to fitting.
QF3a Lead hard wired to fitting. 5x1.0mm ,maximum 2.5metres.
2QF3b Lead mates with QF6 Plug in fitting. 3x2.5mm(A,N,E) & 2x1.5mm Dali.
2
2
QF3c Lead mates with Qf6 Plug in fitting. 5x1.0mmmaximum length 2.5 metres.
2
QF4 Hard wired to fitting.B5T Fits directly into QF6 B5.2 Connector - Field
New power supply
Plugging multiple A5T reduces the No. of QF2 leads required.
QF2 A5T
QF6
51TechnicalEMERGENCY TECHNICAL 51Technical
52 Technical
Pierlite emergency luminaires have captured the essence of design presence and continuity, satisfying the designer’s needs and the installer’s installation criteria. Meeting with compliance to IEC60598-2-22 enables the design of emergency lighting units to be more flexible. EMCElectromagnetic Compatibility (EMC) under the opus of AS/NZS4051:1998 deals with devices such as lighting/emergency lighting products that may have the potential to cause interference to radio communication systems. This may be mains disturbance (noise down the line), radiation (giving out interfering frequencies from components) or deceptability (interference of frequency due to external noise).Under AS/NZS4051:1998 lighting/emergency lighting products must comply with disturbance levels between 9 KHz and 30 MHz. All Pierlite lighting/emergency lighting products comply with the above standard. EMERGENCY EVACUATION LIGHTING FOR BUILDINGS - AS/NZS2293.1Spacing of emegency luminaires in AustraliaSpacing of emergency luminaires are based on illuminance calculations where the light reaches the floor directly from the emergency light source. Minimum illuminance level for emergency lighting is 0.2 lux.
Pierlite Emergency LightingPlease use classification tables provided with each product.ie: DB136MEmergency ClassificationC0 - D40 C90 - C40 C180 - n/a
Spacing of emegency luminaires in New ZealandSpacing of emergency luminaires is based on light that reaches the floor by reflection from the surfaces of the room, ie: ceiling and walls. Therefore you are required to obtain the utilisation factor of the required luminaire and then calculate the amount of emergency luminaires needed. Minimum illuminance level for emergency lighting is 1 lux.
Formula for spacing of emergency luminaires in New Zealand is:LC(NZ) = LC(AUST) 6 - (6.6 x UF) LC(AUST) - Classification of emergency luminaire to Australian standard. ie: DB136M
Emergency ClassificationC0 - D40 C90 - C40 C180 - n/aLC(NZ) - Classification of the above luminaire modified by the (UF) factor of the area to be illuminated.UF - Determines the proportion of light output from a lamp that falls on a particular area for emergency lighting.
Required Calculation
RI (Room Index) = Length x Width Height (Length + Width)ie: RI (0.95) = 10 x 4 3 (10 + 4)From Room Index locate UF Factor from chosen fitting, ie. 0.42LC(NZ) = D40 = D12.4 6 - (6.6 x 0.42)Move to the nearest higher classification which would be D12.5. Refer to Pages 422 and 425 of the Technical Section for luminaire spacing tables.Note: If the Utilisation Factor for the room is greater than 0.75, the New Zealand formula does not apply. Apply the Australian table classifications only. If the Utilisation Factor for the room is less than 0.15, the value of 0.15 shall apply and be used in the New Zealand formula.
53Technical
Particular requirements – luminaires for emergency lighting. The new terminology recognises that the term ‘emergency lighting’ includes four categories of lighting, each incorporating an alternative energy supply, as follows:• emergencyescapelighting• illuminatedemergencyexitsigns• highrisktaskarealighting• standbylightingHowever as reflected in the new series title, only two of these four categories are addressed in the AS2293 standards –namely emergency escape lighting and illuminated emergency exit signs.PictogramsThe new standards allow only the following pictograms from the international standard document ISO3864-1:
Straight On From Here Left From Here Right From Here
Size Of Pictorial ElementsMinimum pictorial element height for all illuminated exit signage is 100mm.There is no limit on the maximum pictorial element height. The four recommended pictorial element heights of 100, 150, 200 and 250mm correspond to maximum viewing distances as follows.
The Emergency Lighting Working Group, a working group of Lighting Council Australia, provides the following advice regarding changes to emergency lighting standards in Australia.The following new emergency lighting standards are now published:AS2293.1:2005 System design, installation and operationAS2293.3: 2005 Emergency escape luminaires and exit signsThese standards replaced: AS/NZS2293.1:1998 and AS/NZS2293.3:1995Significant changes from AS/NZS2293.1:1998 include:• replacementofword‘exit’withpictogram• inclusionofdetailedrestrictionsonuseofarrows• revisionofmaximumviewingdistancesforexit signs• adoptionofterminologyfromIEC60598.2.22• unlikethe1998version,thisstandardisnot a joint Australian/New Zealand document; there is no content specific to New ZealandThe principal reason for the AS/NZS2293.3:1995 edition of the standard is to specify requirements for exit signs employing internationally accepted pictograms, instead of the previously used word ‘Exit’. Terminology used to describe the subject matter has been modified in both standards to be compatible with that used in IEC60598.2.22 Luminaires Part 2.22
New Standard RequirementsElement Height (mm) Maximum Viewing Distance (m) ≥100 <150 16 ≥150 <200 24 ≥200 <250 32 ≥250 -- 40The maximum viewing distance must be marked on the face of each diffuser located on the background, either within one of the elements or on additional background.Australian Building Code PositionThe Australian Building Codes Board recognised the new emergency lighting standards as at 1st May 2006. The new standards may be utilised on a project by project basis, if approved for the project by the applicable local authority.
Modes of OperationTerminology used to describe the Models) of operation has been modified to include luminaires with multiple emergency lamp configurations. Please refer to the table opposite.
54 Technical
Recommended Locations
Exit DoorsLocate emergency exit luminaire at each exit door. Exit signs shall be mounted at between 2m and 2.7m above floor level, or immediately above the door if higher than 2.7mEnsure the exit does not exceed maximum viewing distances recommended.Check emergency escape route is clear of obstacles and that the minimum illuminance level of 0.2 lux is achieved.Intersecting CorridorsAn emergency luminaire is to be installed within 2 meters of the intersecting corridors.Change in DirectionAn emergency luminaire is to be installed within 2 meters of an intersection at the change of direction except when the change of direction does not have interference of the wall of the corridor and that the C0/C90 spacing is not exceeded.Change in Floor LevelAn emergency luminaire is to be installed at each change of floor level, on the low side.StairwaysProvide emergency luminaires to ensure that each flight of stairs including the intermediate landing receives direct light. A minimum of 1 lux is required.Note: If the intermediate landing in an enclosed stairwell is no longer than 2m in length that intermediate landing need not receive direct lighting.
EscalatorsEmergency lighting is required for escalators to enable users to get off them safely.Toilets(Not referred to in standard but highly recommended)Toilets incorporating 2 or more cubicles or exceeding an area of 8m2 require emergency lighting. Emergency lighting is also to be incorporated into handicapped toilet facilities.Switch RoomsPlace emergency lighting in control, plant or switch rooms that have the provision to
NOTE: This example emergency lighting layout has been created in the intended spirit of AS2293 and should be used as a guide only.
provide normal and emergency lighting to the premises.Covered Car ParksAre treated as part of the normal emergency lighting design and full consideration of exit and emergency lighting is taken into account.
55Technical
Powerpack Suitability & Performance Guide2 Hour Duration Use Code to Choose Correct Power Pack for Emergency Tube/Lamp
Unit Description CodeBILW2/18/6E Inverter 18W 7.2V CBILW2/36/6E Inverter 36W 7.2V DBILW2/58/6E Inverter 58W 7.2V EBILW2/36/8E Inverter 36W 9.6V FNote: ‘E’ Signifies inverter operates on both standard & electronic ballasts
% Ballast Lumen FactorBase Lamp A B C D E FT8 18W 19 47 32 T8 30W 12 20T8 36W 12 25 50T8 58W 8 172G11 PL18 13 47 222G11 PL24 18 302G11 PL36 16 27G24Q PLC13 27 45G24Q PLC18 30 50G24Q PLC36 24 40GR10Q 2D10W 27 45GR10Q 2D21W 25 42GR10Q 2D28W 19 322G10 DF18 14 232G10 DF24 14 232G0 DF36 16 7
Battery Pack to Suit Nickel Cadmium Fixing CentrePart Description Inverter Size Fixing BP4S 4 cell pack 4.8V stick format 282x36 BILW/4’E’Series 173x38x31 166BP6S2 6 cell pack 7.2V 3+3 format 218x36x2 BILW/6’E’Series 173x38x38 166BP8S2 8 cell pack 9.6V 4+4 format 282x36x2 BILW/8’E’Series 173x38x38 166
Battery Pack to Suit Nickel Metal HydridePart DescriptionP4S6 4 cell pack 4.8V block format 187x38x21P6S6 6 cell pack 7.2V block format 252x38x21P8S6 8 cell pack 9.6V block format 320x38x21
2 Hour Duration - T5 Use Code to Choose Correct Power Pack for Emergency Tube/Lamp
Unit Description CodeBILWT5/2/14/6 Inverter 14W T5 7.2V GBILWT5/2/28/8 Inverter 28W T5 9.6V HBILWT5/2/35/8 Inverter 35W T5 9.6V IBILWT5/2/49/8 Inverter 49W T5 9.6V JBILWT5/2/54/8 Inverter 54W T5 9.6V K
% Ballast Lumen FactorBase Lamp G H I J KT5 14W 51 T5 28W 37T5 35W 29 T5 49W 22T5 54W 21
T5 Lamp GuideLamp Type Watts Length Initial Lumens Rated LifeT5 14W 550 1350 16000Linear 28W 1150 2900 16000Fluorescent 35W 1450 3650 16000 49W 1450 4300 16000 54W 1150 5000 16000
Battery Pack to Suit Nickel CadmiumPart Description Inverter Size Fixing CentreBP6S2 6 cell pack 7.2V 3+3 format 218x36x2 BILT5 Series 173x38x38 166BP8S2 8 cell pack 9.6V 4+4 format 282x36x2 BILT5 Series 173x38x38 166
Battery Pack to Suit Nickel Metal HydridePart DescriptionP6S6 6 cell pack 7.2V block format 252x38x21P8S6 8 cell pack 9.6V block format 320x38x21
55Technical
56 Technical
Information & Wiring Guidelines for Powerpacks & InvertersPlease read these instructions carefully before installing or maintaining this equipment. This data should be used as a guide only. Good electrical practices should be followed at all times.Recommended Installation /Maintenance GuidelinesThe installer is responsible for all relevant safety and building code standards.Do Not Megga After InstallationIt is recommended to disconnect live and neutral wires from the unit before an insulation resistance check.Converting An Existing LuminaireInstalling a Power Pack will usually void the manufacturer’s warranty and EMC compliance. It is the installer’s responsibility to comply with relevant wiring, EMC and emergency lighting requirements in accordance with the relevant sections of AS2293 which may include the necessity to have the luminaire tested and certified both thermally and photometrically. Power Packs normally installed inside the luminaire may require the repositioning of components in the luminaire, ie. starter, ballast, capacitor. Any of the components being utilised that now show signs of end of life should be replaced at the time of converting the power pack. It is also advised that the internal wiring be replaced using the recommended high temperature cable (V90) minimum.Use Of Remote EnclosuresThermal conditions and/or lack of space in the luminaire may result in remote mounting
of the power pack in an appropriate remote enclosure. Ensure the following is taken into account:-Ensure test switch is accessible during re-lamping. It may be mounted within the luminaire or remote enclosure.LED is to be visible during normal operation irrespective of mounting within the luminaire or remote enclosure.Connecting cables to the enclosure are not to exceed 1 metre.Resistance of the battery wires are not to exceed 0.5ohms.Ensure battery leads are kept as short as possible.Testing The Conversion Of the LuminaireConfirm its electrical safety and its operation.Confirm the temperature of main components utilised in the luminaire comply with recommended requirements.The luminaire should be mounted as intended. The ambient temperature is to be as expected for the luminaire’s intended environment.Apply maximum voltage prescribed for a period of 24 hours, then switch off the luminaire and ensure that it provides appropriate emergency duration in accordance with relevant standards.Examine temperature of relevant components. If components comply with the prescribed temperature, then the balance of the luminaire may be converted the same way.
NoteBILW Power Packs incorporate a thermistor to protect componentry from overheating in excessive temperatures. Once tripped it may only be reset by switching off the mains. Once stable conditions are achieved, reconnect mains. Pierlite emergency luminaires have Ta Ratings from Ta30 to Ta40.When installing a BILW power pad feed the supply cable through the appropriate cable entry. Avoid obstruction to mounting holes, other lighting componentry and covers.It is recommended that a full duration test is carried out prior to commissioning. Upon appropriate connection, initially charge the luminaire for a minimum of 24 hours. Upon charging, the red LED will light indicating that mains is present and batteries are charging.After 24 hours disconnect the supply and check for the rated duration period. Pressing the test button carries out a quick confidence test.Routine tests should be carried out in accordance with the relevant Standards, with all results and status recorded in a log book.Batteries are to be replaced with the same Pierlite battery pack. The model number is stamped on the battery pack. When disposing of batteries do not pierce, incinerate or short circuit. Batteries should be disposed of in accordance with recognised disposal methods.Powerpacks and inverters are designed to operate on 230V AC 50/60Hz
57Technical
Mains & Lamp Connection DiagramsFor the standard fluorescent Exit range.
Maintained and Non-Maintaned Sustained
58 Technical
Wiring Diagrams for Standard - Electronic BallastsThe wiring diagrams are given as a guide to installation with electronic ballasts. Due to the wide variety of electronic ballast units and connection styles available, it is advisable that the luminaire be fully tested to prove its correct functionality.
NOTEFor Non-Maintained use1 Delete ballasts & starter2 Only connect Pin 1 & Pin 3 lamp3 Connecting neutral to lamp will improve striking4 For further technical data visit www.pierlite.com
NOTE1 Do not flash test2 All connections shall be made with at least V90 rated solid core 0.5mm wire
EMERGENCY FAULT FINDING FLOW CHART
NO NO
NO NO
Fails Fails
YES YES
YES YES
OK OK
EXITOK
LED lamp’s Off Lamp Off
Check LED strip & batteries are pluged
into PCA board
Check the power is on and connected to a non switched
circuit. Then retest
Check the power is on and connected to a non switched
circuit. Then retest
Check battery connected
Check battery connected
Has battery been charged for 16hrs
Has battery been charged for 16hrs
Charge battery for 16hrs
Charge battery for 16hrs
Co-ordinate resolution with QA
Co-ordinate resolution with QA
Co-ordinate resolution with QA
Co-ordinate resolution with QA
Battery ok for 90min
Battery ok for 90minTEST TEST
Fail 90min test Fail 90min test
Replace battery Replace battery
Return inverter with PFR to QA
Return inverter with PFR to QA
Return with PFR to QA
Return with PFR to QA
and/or and/or
Fail FailPass Pass
Check LED Inverter lamp
is On
Check LED Inverter lamp
is On
EXIT
BDM Emergency Lighting - David Virgona 0408 181 404 Version 1 : 30.03.09
LED 10W
YES YES
Check lamp is functioning
Replace faulty lamp
EMERGENCY FAULT FINDING FLOW CHART
NO
NO
NO
Fails
YES
YES
YES
OK
BATTENOK
Lamps Off
Check both lamps are
functioning
Check the power is on and connected to a non switched
circuit. Then retest
Check battery connected
Put in Emergency Mode
Has battery been charged for 16hrs
Charge battery for 16hrs
Co-ordinate resolution with QA
Co-ordinate resolution with QA
Battery ok for 90minTEST
Fail 90min test
Replace battery
Return inverter with PFR to QA
Return with PFR to QA
and/or
Replace faulty lamp
Fail Pass
Check LED Inverter lamp
is On
BATTEN
BDM Emergency Lighting - David Virgona 0408 181 404 Version 1 : 30.03.09
59Technical
GUIDE TO SAFE HANDLING OF LIGHTING PRODUCTS CONTAINING BATTERY SYSTEMS.
Introduction:Battery systems are an essential component in a number of lighting products, especially emergency lighting systems, which require an alternative energy source when the traditional mains supply source fails.
Handling and maintenance procedures for lighting battery circuits is no different to handling conventional battery components ie: scheduled maintenance is an essential process in maintaining the components service life and disposal of the components at the end of the service should be conducted in a safe and environmentally responsible manner.
The following information serves as a guide to safe handling and maintenance of Pierlite Lighting products containing battery components.
• Battery performance should be checked on a regular schedule and components replaced when the performance falls below the manufacturer’s specification.
• Failed components should be disposed of in accordance with local waste management requirements.
• In the instance of a catastrophic failure resulting in a ruptured battery casing, the component should be handled with extreme care, avoiding contact with the installer’s skin, eye or inhalation. Suitable protective clothing is recommended for such maintenance procedures.
• The components and contaminated protective clothing should then be disposed of in accordance with your local waste management requirements.
• If skin or clothing comes in contact with fluid from a Nickel Cadmium (NiCad) or Nickel Metal (NiMH) battery, thoroughly wash the area immediately with clean water and seek medical care where needed.
The sun and the moon, two dominant sources of light control.The third is Pierlite.
60 Technical
The sun and the moon, two dominant sources of light control.The third is Pierlite.
Pierlite is a member of the Gerard Lighting Group.
Pierlite is a member of the Gerard Lighting Group.
Issue: October 2010
Product region: Australia
© 2010 Pierlite Australia and acknowledgements where noted. www.pierlite.com