8/3/2019 Embeeded Sep
1/20
EMBEEDED SEP
WADE-8056/WADE-8556Presented
ByS.PREETHI
08011012104
FIANL CSE-A
8/3/2019 Embeeded Sep
2/20
INTRODUCTION
Port well Inc., a world-leading innovator in theIndustrial PC (IPC) market and a
member of the Intel Communications Alliance,has launched its new WADE-8056 in
response to market demand for a simplifiedembedded system board (ESB) that
combines robust computing power, a smaller
footprint and lower power consumption with increased product longevity.
The WADE-8056 Mini-ITX ESB
8/3/2019 Embeeded Sep
3/20
Hardware Configuration
This chapter indicates jumpers, headers andconnectors locations. Users may find
useful information related to hardware settingsin this chapter. The default settings
are indicated with a star sign ().
8/3/2019 Embeeded Sep
4/20
Jumper Setting
In the following sections, Short means coveringa jumper cap over jumper pins; Open
or N/C (Not Connected) means removing ajumper cap from jumper pins. Users can
.
8/3/2019 Embeeded Sep
5/20
WADE-8056 Jumper andConnector Locations
8/3/2019 Embeeded Sep
6/20
Grading
8/3/2019 Embeeded Sep
7/20
Connector Allocation
8/3/2019 Embeeded Sep
8/20
8/3/2019 Embeeded Sep
9/20
8/3/2019 Embeeded Sep
10/20
8/3/2019 Embeeded Sep
11/20
System Installation
3.1 Intel LGA 775 Processor
Installing LGA775 CPU
1) Lift the handling lever of CPU socketoutwards and upwards to the other end.
Following step A position to step B position.
8/3/2019 Embeeded Sep
12/20
Step 2
2) Align the processor pins with pinholes on thesocket. Make sure that the notched corner ordot mark (pin 1) of the CPU corresponds to thesockets bevel end. Then
press the CPU gently until it fits into place (seeIf this operation is not easy
or smooth, dont do it forcibly. You need to
check and rebuild the CPU pin
uniformly
8/3/2019 Embeeded Sep
13/20
setup
8/3/2019 Embeeded Sep
14/20
Removing CPU
1) Unlock the cooling fan first. 2) Lift the lever of CPU socket outwards and
upwards to the other end.
3) Carefully lifts up the existing CPU to removeit from the socket.
4) Follow the steps of installing a CPU tochange to another one or place handling bar
to close the opened socket.
8/3/2019 Embeeded Sep
15/20
Configuring System Bus
WADE-8056 will automatically detect the CPUused. CPU speed of Intel P4 /Celeron
D can be detected automatically.
I t lli th Si l B d
8/3/2019 Embeeded Sep
16/20
Installing the Single BoardComputer
To install your WADE-8056 & 8556 intostandard chassis or proprietary environment,
please perform the following:
Step 1 : Check all jumpers setting on properposition
Step 2 : Install and configure CPU and memorymodule on right position
Step 3 : Place WADE-8056 into the dedicatedposition in the system
Step 4 : Attach cables to existing peripheraldevices and secure it
8/3/2019 Embeeded Sep
17/20
WARNING
Please ensure that SBC is properly insertedand fixed by mechanism.
Note:
Please refer to section 3.3.1 to 3.3.4 to installINF/VGA/LAN/Audio drivers.
8/3/2019 Embeeded Sep
18/20
8/3/2019 Embeeded Sep
19/20
.
8/3/2019 Embeeded Sep
20/20