D6.1
Electromechanical productsOrthobloc
GeneralOrthobloc geared motors with helical bevel gears are used to adapt the speed of the electric motor to that of the driven machine.Their size is therefore determined by the motor power (P) expressed in kilowatts (kW) and the output rotation speed of the gearbox (nS) in revolutions per minute (min-1).The characteristic parameter of speed reducers is the rated output torque (MnS) expressed in Newton-metres (Nm):
MnS = P × 9550 × efficiency nS
A range of eight sizes: 31, 32, 33, 34, 35, 36, 37, 28.Rated output torque up to 10 000 Nm.Power ratings: 0.25 to 90 kW.Reduction ratios: 3.71 to 160.Two to three reduction stages.High efficiency: 95 %.Reversible.Quiet operation.
ConstructionDescription of Orthobloc (Ot) gearboxes
Component Materials Remarks
Housing Cast iron - use of single-component pearlitic (ENGJL-200 cast iron flake graphite: 200 MPa tensile strength Ot 31 to Ot 37; FGL-150 MPa tensile strenght Ot 28) to ensure unit is fully sealed- monobloc ribbed with internal reinforcements to absorb vibrations and noise, and increase its rigidity- foot mounted S, SBT or with flanges BS, BD..., BR. They are compact and meet industrial requirements
Gears Steel - cut by gear hob, they are heat treated and then undergo final machining. The quality and precision of the gear cutting allow maximum torque with minimum noise level
Shaft Steel - grinding of sealing surfaces- cylindrical hollow with protective cover or output with key in accordance with ISO R 773, or hollow with SD shrink disc- tolerance of diameters in accordance with NFE 22-051 and ISO R775- tapped holes at the solid shaft end for fixing connecting devices in accordance with DIN 332 version D
Lipseals Nitrile - sealing rings between housing and flange- antidust lipseals in accordance with DIN 3760 form AS- gasket under the access cover (Ot 31 to Ot 37)
Lubrication Oil - in accordance with ISO 6743 / 6- delivered with the quantity of oil corresponding to the operating position, it is fitted with drain, level and breather plugs
Mounting AP: gearbox with input shaftMI: geared motor with integral motorMU-FF: geared motor with IEC motor, manufactured with universal mounting
Standard motor LS: multi-voltage 220/380 V - 230/400 V - 240/415 V- pressed steel ventilation cover, on request fitted with a drip cover for operation in vertical position (shaft facing down)- metal terminal box fitted with cable gland- IP 55 standard protection
Brake motors FCR: failsafe brake induction motor, from 0.25 to 15 kW, IP 55 protectionFCPL: failsafe brake induction motor, 18.5 to 90 kW, IP 44 protection
Finish Paint Shade : RAL 6000 (green), system I (1 polyurethane vinyl layer of 25/30 µm)
D6.2
Electromechanical productsOrthobloc
Standard position : gearbox viewed from side F, motor behind.
1 - Marking on sides
2 - Mounting
3 - Output shaft
4 - Options : shrink disc SD torque arm R
Side D
Side F Side L Side R
Side U
SBTFoot and face mounted
SFoot mounted
LSolid shaft coming out on left
RSolid shaft coming out on right
LRSolid shaft coming out on left and right
HHollow shaft
SDRHollow shaft with shrink disc on right
SDLHollow shaft with shrink disc on left Supplied separately
RK
BSL - BDLFlange mounting on left
BSR - BDRFlange mounting on right
BRRReinforced flange on right
Mounting and operating positions S, SBT, BS, BD, BR
D6.3
Electromechanical productsOrthobloc
Operating positions for Ot S, SBTThe absolute orientation of the connection (TB: Up, Down, Right, Left, Front, Back) is related to the chosen operating position.
The relative orientation (0-90-180-270, in the trigonometric direction), a consequence of the absolute position, is related to the feet (real or imaginary) for an observer, facing the gearbox.
R
L
L
L
R
L
L
R
B3 B8
B6 B7
V5 V6
LEFT90 LEFT
270
LEFT90
RIGHT90DOWN- 180 DOWN - 0
UP - 0
FRONT - 0
LEFT270
LEFT180
RIGHT - 0
UP - 270
DOWN - 90
UP - 90
DOWN - 270
LEFT - 0
RIGHT 90
RIGHT180
RIGHT 270
BACK180
BACK180
UP - 180
RIGHT270 R
H
H
H
H
H
FRONT - 0
R
R
L
H
Left output shaft L, right R, hollow H.
Std terminal box
D6.4
Electromechanical productsOrthobloc
Operating positions for Ot BSL, BDLThe absolute orientation of the connection (TB: Up, Down, Right, Left, Front, Back) is related to the chosen operating position.
The relative orientation (0-90-180-270, in the trigonometric direction), a consequence of the absolute position, is related to the feet (real or imaginary) for an observer, facing the gearbox.
L
L
HH
H
HH
H
L
L
L
L
B5 B52
B53 B54
V1 V3
LEFT - 90
DOWN - 180
UP - 180
UP - 270
UP - 90
DOWN - 90
RIGHT - 180
LEFT - 180
DOWN - 270
RIGHT - 90
LEFT - 270
RIGHT - 270
BACK - 180
BACK - 180
LEFT270
RIGHT270
LEFT90
RIGHT90
FRONT-0
FRONT-0
UP - 0
DOWN - 0
LEFT - 0
RIGHT - 0
Left output shaft L, hollow H.
Std terminal box
D6.5
Electromechanical productsOrthobloc
Operating positions for Ot BSR, BDR, BRRThe absolute orientation of the connection (TB: Up, Down, Right, Left, Front, Back) is related to the chosen operating position.
The relative orientation (0-90-180-270, in the trigonometric direction), a consequence of the absolute position, is related to the feet (real or imaginary) for an observer, facing the gearbox.
R
R
R
R
R
R
H
HH
H
H
H
B5 B52
B53 B54
V3V1
LEFT - 90
LEFT90
RIGHT270
LEFT - 270
DOWN - 180
UP - 180
RIGHT - 270
RIGHT - 90
LEFT - 0
LEFT - 180
UP - 270
UP - 90
DOWN - 270RIGHT - 180
DOWN - 90
BACK - 180
BACK - 180
RIGHT - 90LEFT270
UP - 0
FRONT-0
DOWN - 0
FRONT - 0
RIGHT-0
Right output shaft R, hollow H.
Std terminal box
D6.6
Electromechanical productsOrthobloc
Ot 3433 B5 BS L H 50.6 MI 4P LS 80 L 0.9 kW 230/400 V 50 Hz UG
Gearbox type Size Operating
positionMounting
formMounting position
Definition of output
shaft
Exact reduction
Typeof input
Number of poles
Series and frame size
Motor output power
Mains voltage and frequency Use
Example of coding :
Orthobloc 3433 0.9 kW, 29.2 min-1, class II
Designation : CodeOt 3433 B5 BSL H 50.6 MI 460 44394P LS 80 L 0.9 kW 230/400V 50 Hz UG
Adaptation possibilities
Input shaft “AP”
ENTRAINEMENT
Integral electric motor“MI ”
Universal mounting“MU ”
Electric motor -standard IEC B5
Faceplate formSBT
Flange mountedBS, BD
Hollow with shrink discSDR
Cylindrical hollowH
Cylindrical solidL
Foot mounted S
Reinforced flangeBR
OUTPUT SHAFT GEARBOX HOUSING DRIVE SYSTEMOrthobloc Ot gearboxes can be used in conjunction with the following drives:
•3-phaseinductionmotors: - LS motor from 0.25 to 90 kW - FCR brake motor from 0.25 to 15 kW - FCPL brake motor from 18.5 to 90 kW
•electronicvariablespeedmotors: centralised system with separate drive - LSMV motor from 0.25 to 90 kW - LSMV FCR brake motor from 0.25 to 11 kW - LSMV FCPL brake motor from 15 to 90 kW
decentralised system with integrated drive - VARMECA from 0.25 to 11 kW - VARMECA and FCR brake from 0.25 to 11 kW
Designation / Coding
Leroy-Somer offers different types of drive for its gearboxes which meet very wide-ranging needs. They are described below and offered in this catalogue.For other drives, consult the Leroy-Somer technical specialists who will be glad to assist.
D6.7
Electromechanical productsOrthobloc
SelectionThe selection of a gearbox or a geared motor should take account of the application.Some of these applications are listed in the “AGMA” indicative load classification on the next page.
The table opposite summarises the relationship between the “AGMA” class and the duty factor Kp of the gearbox.
“AGMA” class Gearbox duty factor Kp
I 1
II 1.4
III 2
1st case. – Your application is listed
2nd cas. – Your application is not listed
Follow the indicative load classification table according to “AGMA” on the next page.
Indicative classification of loadsaccording to “AGMA”
ApplicationsOperation in hours / day
CONVOYORS (loaded or fed uniformly)beltchain
3h/day 10h/day 24h/day
I I II
I I II
Application example:belt CONVOYOR
Operating time:10 hours/ day
“AGMA” class: I
Gearbox duty factor Kp = 1
Type of application Daily operating time “AGMA” class
Shock-free, not many starts 10 hours/day I
Damped shocks 10 hours/dayII
Shock-free, not many starts 24 hours/day
Violent shocks, many starts 10 hours/dayIII
Damped shocks 24 hours/day
The “AGMA” selection class is defined by daily operating time and the type of operation of the application, according to the table below. t
D6.8
Electromechanical productsOrthobloc
ConditionsOt: S, SBT, BS, BD..., BRLS: IP55 - 50 Hz - Cl. F - 400 V Y - from 0.25 to 55 kW - U.G. LS FCR brake: IP55 - 50 Hz - Cl. F - 400 V - from 0.25 to 15 kW - U.G. LS FCPL brake: IP44 - 50 Hz - Cl. F - 400 V - from 11 to 55 kW - U.G.
MIMUAP
Maximum quantity per orderOt 3132 Ot 3232 - 3233 Ot 3333 Ot 3433 Ot 3533 Ot 3633 Ot 3733
AP 3 3 3 3 3 2 23 3 3 3 3 2 2 - - - 2 2 2 2
3 3 3 3 3 2 2 - - - 2 2 2 2
MI LS FCPL - - -3 3 3 3 3 2 2 - - - 2 2 2 2 - - - - - 1 1
- - - - - - -
2 2 2 2 2 2 2 - - - 2 2 2 23 3 3 3 3 2 2 - - - 1 1 1 1
Ot 2803
MU LS FCPL - - -
Mechanical options and pages of dimensions corresponding to the mounting form and L (left) R (right) output shaft Mounting
Backstop Ot OtType S L/R SBTLR L/R NS BSL / BSR BDL / BDR BRR AD/AP-MI-MU MU AP
Ot 3132 D6.19D6.21D6.23D6.25D6.27D6.29D6.31D6.33
D6.18D6.20D6.22D6.24D6.26D6.28
D6.20D6.22D6.24D6.26D6.28
D6.24D6.26D6.28
D6.34
D6.58D6.58D6.58
D6.30D6.32
D6.35
D6.37D6.39D6.41D6.43D6.45D6.47D6.49D6.51D6.53
D6.36D6.38D6.40D6.42D6.44D6.46D6.48D6.50
D6.37D6.39D6.41D6.43D6.45D6.47
D6.38D6.40D6.42D6.44D6.46
D6.49D6.51
D6.56D6.56D6.56D6.56D6.56D6.56D6.56D6.56
D6.52
D6.54D6.54D6.54D6.54D6.54D6.54D6.54D6.54D6.54
D6.17D6.17D6.17D6.17D6.17D6.17D6.17D6.17D6.17
D6.36-D6.57D6.38-D6.57D6.40-D6.57D6.42-D6.57D6.44-D6.57D6.46-D6.57D6.48-D6.57D6.50-D6.57D6.52-D6.57
D6.17-D6.54D6.17-D6.54D6.17-D6.54
D6.54D6.54D6.54D6.54D6.54D6.54D6.54D6.54D6.54
D6.17D6.17D6.17D6.17D6.17D6.17D6.17D6.17D6.17
D6.19D6.21D6.23D6.25D6.27D6.29D6.31D6.33D6.35
D6.17-D6.54D6.17-D6.54D6.17-D6.54
Ot 3232Ot 3233Ot 3333Ot 3433Ot 3533Ot 3633 28
Ot 2803Ot 3733
Mechanical options and pages of dimensions corresponding to the mounting form and H hollow shaft
Shrink disc Torque arm Backstop Ot OtType S SBT BSL / BSR BDL / BDR SDR / SDL RK AD/AP-MI-MU MU AP
Ot 3132Ot 3232Ot 3233Ot 3333Ot 3433Ot 3533
Ot 3733Ot 2803Options
Electrical options230/400V 400V PTO/PTC DLRA Drip cover TRR Different Mf J01
LS 0.25 - 3 kW - - - - -4 - 9 kW MI - - - - -
11 - 15 kW MI - - - - -18.5 - 22 kW MI - - - - -
55 - 90 kW MI - - - - -4 - 9 kW MU - - - - -11 - 45 kW MU - - - - -55 - 90 kW MU - - - - -0.55 - 7.5 kW - - - - -11 - 30 kW - - - - -0.25 - 3 kW4 - 5.5 kW7.5 - 9 kW -11 - 15 kW - -
LS FCPL 11 - 90 kW - -
4p / MI-MU
LS FCR
Input Brake options
FLS / MU
Foot mounted
Foot mounted
Flange mountedOt MI forms Mounting
11 - 55 kW75 - 90 kW
- - - - - - -55 - 90 kW
- - - - - - -55 - 90 kW
Flange mountedOt MI forms
11 - 30 kW
MU LS FCR 0.25 - 9 kW11 - 15 kW
MU FLS 0.55 - 7.5 kW
11 - 90 kW
MU LS0.25 - 9 kW
37 - 45 kW11 - 30 kW
MI LS 0.25 - 9 kW11 - 45 kW
MI LS FCR 0.25 - 9 kW11 - 15 kW
Input-
Ot 3633
30 - 45 kW MI - - - - -
3 WD < 5 WD < 8 WD < 13 WD < 18 WD < To be agreed
D6.9
Electromechanical productsOrthobloc
Ot 3132LS,brakeLS-IP55-Cl.F-230V-400VY400V∆-50Hz-U.G
Integral mounting MIUniversal mounting MUInput shaft mounting AP
ClassesI, II, III
(kp = 1, 1.4, 2)
Selection
0.25 0.37 0.55 0.75 0.9 1.1 1.5 1.8 2.2 3 4
min-1 i exact 112
29.3 49.4 3.08 2.03
32.4 44.8 3.39 2.24
37.1 39.1 3.88 2.56 1.68 1.22 1.03 0.84
40.8 35.6 4.3 2.81 1.84 1.34 1.13 0.93
47.2 30.7 4.74 3.13 2.05 1.5 1.26 1.03
52.9 27.4 5.17 3.42 2.25 1.64 1.38 1.13 0.82
59.1 24.6 5.56 3.68 2.42 1.76 1.48 1.21 0.88
67.5 21.5 6.13 4.05 2.66 1.94 1.63 1.33 0.97 0.81
71.4 20.3 6.3 4.16 2.74 1.99 1.68 1.37 1 0.84
84.8 17.1 7.12 4.71 3.1 2.26 1.9 1.55 1.13 0.95
90.0 16.1 7.33 4.85 3.19 2.32 1.95 1.6 1.17 0.97 0.8
102 14.3 5.26 3.46 2.52 2.12 1.73 1.27 1.06 0.86
116 12.5 5.74 3.77 2.75 2.31 1.89 1.38 1.15 0.94
132 11 6.22 4.09 2.98 2.51 2.05 1.5 1.25 1.02
149 9.72 4.43 3.22 2.92 2.22 1.62 1.35 1.1 0.81
168 8.62 4.77 3.47 3.18 2.39 1.74 1.46 1.19 0.87
190 7.62 5.19 3.78 3.18 2.6 1.9 1.59 1.29 0.95
201 7.23 5.35 3.89 3.27 2.68 1.95 1.63 1.33 0.98
225 6.43 2.87 2.1 1.75 1.43 1.05284 5.1 3.29 2.4 2.01 1.64 1.2
4-pole and brake LSFCR
MU obligatory
Selection exampleRequired power: 1.5 kWRequired speed: 90 min-1Duty factor required by the application: Kp = 1Operating position; Mounting form: Horizontal B5, shaft on left, BS flangeDesignation: Ot 3132 B5 BSL L i: 16.1 MI - 4p LS 90 L 1.5 kW - 400V Y - U.G.
LS (kW)
3-phase 4-pole LS
Ot 3132
71 80 90 100
3-phase 4-pole LS71 L 80 L 90 L 100 L
D6.10
Electromechanical productsOrthobloc
Selection
Ot 3232, Ot 3233LS,brakeLS-IP55-Cl.F-230V-400VY-50Hz-U.G
Integral mounting MIUniversal mounting MUInput shaft mounting AP
ClassesI, II, III
(kp = 1, 1.4, 2)
0.25 0.37 0.55 0.75 0.9 1.1 1.5 1.8 2.2 3 4 5.5
min-1 i exact 112 132
9.27 156 1.93 1.2710.2 142 2.13 1.4011.7 124 2.44 1.60 1.0512.9 113 2.67 1.76 1.15 0.8414.9 97.2 3.09 2.03 1.33 0.97 0.8216.7 86.7 3.46 2.28 1.49 1.08 0.9118.7 77.7 3.85 2.54 1.66 1.21 1.02 0.8321.3 68 4.40 2.89 1.89 1.37 1.16 0.9522.6 64.3 4.64 3.06 2.00 1.45 1.23 1.0026.8 54.1 5.50 3.62 2.36 1.72 1.45 1.19 0.8728.4 51 5.83 3.84 2.51 1.82 1.54 1.26 0.9232.1 45.2 6.56 4.32 2.82 2.05 1.73 1.42 1.04 0.8736.7 39.5 7.48 4.92 3.22 2.34 1.98 1.62 1.18 0.99 0.8141.7 34.8 3.64 2.65 2.24 1.83 1.34 1.12 0.9147.1 30.8 4.11 2.99 2.53 2.07 1.51 1.26 1.0353.2 27.3 4.62 3.36 2.84 2.32 1.70 1.42 1.16 0.8560.2 24.1 5.22 3.80 3.21 2.62 1.91 1.60 1.31 0.9663.4 22.9 5.47 3.98 3.36 2.75 2.01 1.68 1.37 1.0071.2 20.4 5.98 4.35 3.67 3.00 2.19 1.83 1.49 1.0989.9 16.1 7.13 5.18 4.6 3.56 2.60 2.17 1.77 1.30
39.4 36.8 6.46 4.25 2.78 2.02 1.71 1.40 46.0 31.5 7.54 4.96 3.24 2.36 1.99 1.63 1.19 1.00 0.8150.5 28.7 8.27 5.44 3.55 2.59 2.19 1.79 1.30 1.09 0.8955.7 26 9.13 6.01 3.92 2.85 2.41 1.97 1.44 1.21 0.9873.5 19.7 7.92 5.17 3.76 3.18 2.60 1.90 1.59 1.30 0.9581.7 17.7 8.82 5.76 4.19 3.54 2.90 2.11 1.77 1.44 1.06 0.7992.8 15.6 10.01 6.54 4.76 4.02 3.29 2.40 2.01 1.64 1.20 0.90103 14.1 7.26 5.28 4.47 3.65 2.67 2.23 1.82 1.33 1.00117 12.4 8.24 6.00 5.07 4.15 3.03 2.53 2.07 1.51 1.13 0.83125 11.6 8.81 6.41 5.42 4.43 3.23 2.71 2.21 1.62 1.21 0.89144 10.1 10.15 7.39 6.24 5.11 3.73 3.12 2.55 1.86 1.40 1.02164 8.83 8.42 7.12 5.82 4.25 3.56 2.90 2.13 1.59 1.16182 7.97 9.32 7.88 6.44 4.70 3.94 3.21 2.35 1.76 1.29206 7.05 10.53 8.91 7.28 5.32 4.45 3.63 2.66 1.99 1.46219 6.61 9.5 7.77 5.67 4.75 3.87 2.84 2.13 1.55259 5.6 9.18 6.70 5.61 4.58 3.35 2.51 1.84310 4.68 7.96 6.67 5.44 3.98 2.98 2.18391 3.71 9.23 7.72 6.30 4.61 3.45 2.52
4-pole and brake LSFCR 112 132
Selection exampleRequired power: 0.55 kWRequired speed: 16 min-1Duty factor required by the application: Kp = 1.4Operating position; Mounting form: Horizontal B3; shaft on left; foot mountedDesignation: Ot 3233 B3 S i: 86.7 MI - 4p LS 71 L 0.55 kW - 400V Y - U.G.
Ot 3232, Ot 3233LS (kW)
3-phase 4-pole LS
3-phase 4-pole LS
71 80 90 100
71 L 80 L 90 L 100 L
Ot 3233
Ot 3232
MU obligatory
D6.11
Electromechanical productsOrthobloc
Selection
Ot 3333LS,brakeLS-IP55-Cl.F-230V-400VY400V∆-50Hz-U.G
Integral mounting MIUniversal mounting MUInput shaft mounting AP
ClassesI, II, III
(kp = 1, 1.4, 2)
0.25 0.37 0.55 0.75 0.9 1.1 1.5 1.8 2.2 3 4 5.5
min-1 i exact 112 132 S
9.08 160 3.41 2.24 1.46 1.06 0.910.6 137 3.97 2.61 1.7 1.24 1.05 0.8511.6 125 4.35 2.86 1.86 1.36 1.15 0.9412.8 113 4.8 3.15 2.06 1.49 1.26 1.0315.0 96.4 5.61 3.68 2.4 1.75 1.48 1.21 0.8816.9 85.7 6.3 4.14 2.7 1.96 1.66 1.36 0.99 0.8318.8 77 7 4.6 3 2.18 1.84 1.51 1.1 0.9221.4 67.8 7.93 5.21 3.4 2.47 2.09 1.71 1.24 1.04 0.8523.8 61 8.79 5.78 3.77 2.74 2.31 1.89 1.38 1.16 0.9427.0 53.8 9.95 6.54 4.27 3.1 2.62 2.14 1.56 1.31 1.07 0.7828.8 50.3 6.98 4.55 3.31 2.8 2.28 1.67 1.4 1.14 0.8333.2 43.7 8.02 5.23 3.8 3.21 2.63 1.92 1.6 1.31 0.9637.9 38.3 5.94 4.32 3.65 2.98 2.18 1.82 1.49 1.09 0.8239.1 37.1 12.76 8.38 5.47 3.97 3.36 2.74 2 1.68 1.3741.9 34.6 6.57 4.77 4.03 3.3 2.4 2.01 1.64 1.2 0.944.3 32.7 14.44 9.48 6.19 4.5 3.8 3.1 2.27 1.9 1.5547.4 30.6 7.4 5.38 4.54 3.71 2.71 2.27 1.85 1.35 1.0247.4 30.58 15.4 10.12 6.6 4.8 4.05 3.31 2.42 2.02 1.6550.5 28.7 7.88 5.73 4.84 3.95 2.89 2.42 1.97 1.44 1.08 0.7954.7 26.5 11.62 7.58 5.51 4.6559.7 24.3 9.27 6.74 5.69 4.65 3.39 2.84 2.32 1.7 1.27 0.9362.3 23.3 8.61 6.26 5.28 4.32 3.15 2.64 2.15 1.58 1.18 0.8669.0 21 9.5 6.91 5.83 4.77 3.48 2.91 2.38 1.74 1.3 0.9571.5 20.3 7.78 6.55 5.36 3.91 3.27 2.67 1.95 1.46 1.0778.0 18.6 10.7 7.78 6.57 5.37 3.92 3.28 2.67 1.96 1.47 1.0783.1 17.4 11.39 8.28 6.99 5.71 4.17 3.49 2.85 2.08 1.56 1.1490.1 16.1 7.77 6.35 4.63 3.87 3.16 2.31 1.73 1.2698.2 14.8 13.38 9.72 8.21 6.71 4.9 4.1 3.35 2.45 1.84 1.34118 12.3 15.54 11.29 9.52 7.78 5.68 4.75 3.87 2.84 2.12 1.55148 9.78 13.46 11.31 9.23 6.74 5.63 4.59 3.36 2.52 1.84
4-pole and brake LSFCR 112 132
Selection exampleRequired power: 1.5 kWRequired speed: 21 min-1Duty factor required by the application: Kp = 1Operating position; Mounting form: Horizontal B3; hollow shaft; BT faceplate mountedDesignation: Ot 3333 B3 SBTLR H i: 67.8 MI - 4p LS 90 L 1.5 kW - 400V Y - U.G.
3-phase 4-pole LS
3-phase 4-pole LS
LS (kW)Ot 3333
71 80 90 100
71 L 80 L 90 L 100 L
MU obligatory
D6.12
Electromechanical productsOrthobloc
0.25 0.37 0.55 0.75 0.9 1.1 1.5 1.8 2.2 3 4 5.5 7.5 9
min-1 i exact 112
9.44 154 7.08 4.65 3.03 2.20 1.86 1.52 1.11 0.9310.5 139 7.82 5.14 3.35 2.44 2.06 1.68 1.23 1.03 0.8411.7 124 8.73 5.74 3.74 2.72 2.30 1.88 1.37 1.15 0.9413.5 108 10.03 6.59 4.30 3.12 2.64 2.16 1.57 1.32 1.08 0.7915.2 95.4 11.32 7.43 4.85 3.52 2.98 2.43 1.78 1.49 1.21 0.8916.5 87.7 12.29 8.07 5.26 3.83 3.23 2.64 1.93 1.61 1.32 0.9618.7 77.5 13.88 9.12 5.95 4.32 3.65 2.99 2.18 1.82 1.49 1.09 0.8221.0 69 10.21 6.66 4.84 4.09 3.34 2.44 2.04 1.67 1.22 0.9123.4 61.9 11.35 7.40 5.38 4.55 3.72 2.71 2.27 1.85 1.36 1.0225.4 57 12.31 8.03 5.84 4.93 4.03 2.94 2.46 2.01 1.47 1.10 0.8128.6 50.6 13.82 9.02 6.56 5.54 4.53 3.30 2.77 2.26 1.65 1.24 0.932.9 44.1 10.06 7.31 6.17 5.04 3.68 3.08 2.51 1.84 1.38 1.0136.3 39.9 10.87 7.9 6.65 5.43 3.96 3.31 2.7 1.98 1.48 1.08 0.7938.2 38 16.20 10.57 7.68 6.49 5.30 3.87 3.24 2.6441.5 35 17.45 11.39 8.28 6.99 5.71 4.17 3.49 2.8541.7 34.8 12.04 8.75 7.35 6.01 4.38 3.66 2.99 2.19 1.64 1.2 0.8846.1 31.5 9.38 7.88 6.44 4.7 3.93 3.2 2.35 1.76 1.28 0.94 0.7846.7 31 19.09 12.48 9.07 7.64 6.25 4.56 3.81 3.11 2.28 1.7150.8 28.6 10.05 8.44 6.9 5.03 4.21 3.43 2.51 1.88 1.37 1.01 0.8453.6 27 13.89 10.1 8.4858.6 24.8 11.11 9.33 7.62 5.56 4.65 3.79 2.77 2.08 1.52 1.11 0.9368.0 21.3 16.42 11.94 10.03 8.19 5.98 4.99 4.07 2.98 2.23 1.63 1.2 172.3 20.1 10.82 8.83 6.45 5.39 4.39 3.22 2.4175.2 19.3 17.6 12.8 10.75 8.78 6.41 5.35 4.37 3.2 2.4 1.75 1.28 1.0782.8 17.5 18.85 13.7 11.51 9.40 6.86 5.73 4.68 3.42 2.57 1.87 1.37 1.1593.5 15.5 7.71 6.44 5.26 3.85 2.88 2.1 1.54 1.2995.6 15.2 15.14 12.72 10.39 7.58 6.34 5.17 3.78 2.84 2.07 1.52 1.27118 12.3 17.55 14.74 12.04 8.79 7.34 5.99 4.39 3.29 2.4 1.76 1.47152 9.51 14.41 10.52 8.79 7.17 5.25 3.93 2.87 2.11 1.76
4-pole and brake LSFCR 112
Selection exampleRequired power: 3 kWRequired speed: 25 min-1Duty factor required by the application: Kp 1.4Operating position; Mounting form: Horizontal B5; shaft on left; BS flangeDesignation: Ot 3433 B5 BSL L i: 57 MI - 4p LS 100 L 3 kW - 400V Y - U.G.
132
Ot 3433LS (kW)
3-phase 4-pole LS
132
71 80 90
3-phase 4-pole LS71 L 80 L 90 L 100 L
100
MU obligatory
Ot 3433LS,brakeLS-IP55-Cl.F-230V-400VY400V∆-50Hz-U.G
Integral mounting MIUniversal mounting MUInput shaft mounting AP
ClassesI, II, III
(kp = 1, 1.4, 2)
Selection
D6.13
Electromechanical productsOrthobloc
Selection
Ot 3533LS,brakeLS-IP55-Cl.F-230V-400VY400V∆-50Hz-U.G
Integral mounting MIUniversal mounting MUInput shaft mounting AP
ClassesI, II, III
(kp = 1, 1.4, 2)
0.75 0.9 1.1 1.5 1.8 2.2 3 4 5.5 7.5 9 11 15 18.5 22 30
min-1 i exact 112 200
9.13 159 3.52 2.97 2.43 1.77 1.48 1.21 0.8910.8 134 4.16 3.51 2.87 2.09 1.75 1.43 1.04 0.7812.0 121 4.61 3.89 3.18 2.32 1.94 1.58 1.16 0.8713.3 109 5.07 4.28 3.50 2.55 2.13 1.74 1.27 0.9514.4 101 5.49 4.64 3.79 2.76 2.31 1.88 1.38 1.0316.8 86.5 6.36 5.37 4.39 3.20 2.68 2.18 1.60 1.20 0.8718.0 80.6 6.81 5.75 4.70 3.42 2.87 2.34 1.71 1.28 0.9420.6 70.6 7.74 6.54 5.34 3.89 3.26 2.66 1.94 1.46 1.06 0.7823.3 62.4 8.72 7.36 6.01 4.38 3.67 2.99 2.19 1.64 1.20 0.8826.1 55.5 9.75 8.23 6.72 4.90 4.10 3.34 2.45 1.83 1.34 0.98 0.8229.2 49.8 10.84 9.15 7.47 5.45 4.56 3.72 2.72 2.04 1.49 1.09 0.9134.1 42.6 12.58 10.62 8.68 6.32 5.29 4.32 3.16 2.37 1.73 1.27 1.06 0.8737.6 38.6 13.83 11.67 9.53 6.95 5.82 4.74 3.47 2.6 1.90 1.40 1.17 0.9537.9 38.2 13.62 11.49 9.39 6.84 5.73 4.67 3.42 2.5642.6 34.04 15.21 12.84 10.48 7.65 6.40 5.22 3.82 2.8642.6 34 13.16 10.75 7.84 6.56 5.35 3.91 2.93 2.14 1.57 1.31 1.07 0.7947.5 30.5 16.89 14.25 11.64 8.49 7.11 5.79 4.24 3.1847.6 30.49 14.6 11.93 8.7 7.28 5.93 4.34 3.25 2.38 1.75 1.46 1.19 0.8753.4 27.1 13.32 9.71 8.13 6.63 4.85 3.63 2.66 1.95 1.63 1.33 0.98 0.7955.6 26.1 19.59 16.53 13.50 9.84 8.24 6.72 4.92 3.6859.8 24.3 10.8 9.04 7.37 5.39 4.04 2.95 2.17 1.81 1.48 1.08 0.88
61 23.6 21.52 18.15 14.83 10.81 9.05 7.38 5.4 4.05 2.96 2.17 1.81 1.48 1.09 0.8869.6 20.8 24.23 20.45 16.7 12.18 10.19 8.31 6.08 4.56 3.33 2.44 2.04 1.67 1.22 0.99 0.8377.6 18.7 26.87 22.67 18.52 13.5 11.3 9.21 6.74 5.05 3.69 2.71 2.26 1.85 1.35 1.1 0.9387.2 16.6 25.29 20.66 15.06 12.6 10.28 7.52 5.64 4.12 3.02 2.52 2.06 1.51 1.23 1.0397.5 14.9 22.94 16.72 14 11.41 8.35 6.26 4.57 3.36 2.80 2.29 1.68 1.36 1.15 0.84 118 12.3 26.79 19.53 16.33 13.32 9.75 7.3 5.33 3.91 3.27 2.67 1.96 1.59 1.34 0.98 153 9.47 23.61 19.72 16.08 11.77 8.82 6.43 4.72 3.94 3.22 2.36 1.91 1.61 1.18
4-pole and brake LSFCR 112FCPL 200
Selection exampleRequired power: 4 kWRequired speed: 17 min-1Duty factor required by the application: Kp = 1Operating position; Mounting form: V1; shaft on left facing down; BS flangeDesignation: Ot 3533 V1 BSL L i: 86.5 MI - 4p LS 112 L 4 kW - 400V Y - U.G.
180
Ot 3533
160 180
80 L 90 L 100 L 132 1603-phase 4-pole LS
LS (kW)
3-phase 4-pole LS80 90 100 132
MU obligatory
D6.14
Electromechanical productsOrthobloc
Ot 3633LS,brakeLS-IP55-Cl.F-230V-400VY400V∆-50Hz-U.G
Integral mounting MIUniversal mounting MUInput shaft mounting AP
ClassesI, II, III
(kp = 1, 1.4, 2)
Selection
1.1 1.5 1.8 2.2 3 4 5.5 7.5 9 11 15 18.5 22 30 37 45
min-1 i exact 112 2009.25 157 4.22 3.08 2.58 2.1 1.54 1.15 0.8410.8 135 4.9 3.58 2.99 2.44 1.79 1.34 0.9811.7 124 5.33 3.88 3.25 2.65 1.94 1.45 1.06 0.7813.5 108 6.1 4.45 3.72 3.04 2.22 1.66 1.22 0.8915.3 95.1 6.9 5.03 4.21 3.43 2.51 1.88 1.38 1.01 0.8417 85.3 7.67 5.59 4.68 3.82 2.79 2.09 1.53 1.12 0.94
19.1 75.9 8.6 6.27 5.25 4.28 3.13 2.35 1.71 1.26 1.05 0.8620.8 69.6 4.66 3.41 2.56 1.87 1.37 1.15 0.9421.1 68.6 8.56 6.24 5.23 4.2623.0 63.1 9.3 6.78 5.67 4.6324.1 60.1 5.37 3.93 2.95 2.15 1.58 1.32 1.08 0.7926.4 55 10.64 7.75 6.49 5.2926.7 54.4 5.93 4.34 3.25 2.38 1.74 1.46 1.19 0.8729.9 48.5 12.02 8.76 7.34 5.98 4.38 3.2830.3 47.8 6.71 4.91 3.68 2.69 1.98 1.65 1.35 0.99 0.832.9 44.1 7.27 5.32 3.99 2.91 2.14 1.79 1.46 1.07 0.8733.3 43.5 13.36 9.74 8.15 6.65 4.86 3.6437.0 39.2 8.15 5.96 4.47 3.26 2.4 2 1.64 1.2 0.97 0.8237.4 38.7 14.95 10.9 9.13 7.44 5.45 4.0840.9 35.5 5.93 4.4441.4 35 9.1 6.66 4.99 3.64 2.68 2.24 1.83 1.34 1.09 0.9146.2 31.4 10.12 7.4 5.55 4.05 2.98 2.49 2.03 1.49 1.21 1.0247.3 30.7 6.81 5.1050.7 28.6 10.9 7.98 5.98 4.37 3.21 2.68 2.19 1.6 1.3 1.09 0.852.3 27.7 7.31 5.4858.0 25 12.6 9.22 6.91 5.05 3.71 3.1 2.53 1.85 1.51 1.27 0.9364.5 22.5 11.54 8.44 6.32 4.61 3.38 2.8267.7 21.4 2.81 2.06 1.67 1.41 1.03 0.8472.5 20 12.43 9.1 6.82 4.97 3.65 3.04 2.49 1.82 1.48 1.24 0.9175.4 19.2 2.82 2.07 1.68 1.41 1.04 0.8480.2 18.1 6.29 4.7181.2 17.9 13.78 10.09 7.55 5.51 4.04 3.37 2.76 2.02 1.64 1.38 1.01 0.8290.7 16 14.3 10.46 7.84 5.71 4.19 3.50 2.86 2.1 1.7 1.43 1.05 0.8592.8 15.6 6.92 5.1899.4 14.6 15.13 11.07 8.29 6.05 4.44 3.7 3.03 2.22 1.8 1.51 1.11 0.9103 14.1 7.39 5.54114 12.7 16.41 12.01 9 6.56 4.81 4.02 3.28 2.41 1.95 1.64 1.21 0.98 0.81127 11.5 11.56 8.46 6.34 4.62 3.39 2.83133 10.9 3.6 2.63 2.14 1.8 1.32 1.07 0.88142 10.2 12.46 9.12 6.83 4.98 3.66 3.05 2.49 1.83 1.48 1.25 0.92148 9.81 1.14 0.94159 9.1 13.81 10.11 7.57 5.52 4.05 3.38 2.76 2.02 1.64 1.38 1.01 0.83178 8.15 14.32 10.48 7.85 5.72 4.20 3.51 2.87 2.1 1.7 1.43 1.05 0.86195 7.43 16.87 12.35 9.25 6.74 4.95 4.13 3.38 2.47 2.01 1.69 1.24 1.01 0.83223 6.5 16.45 12.04 9.01 6.57 4.82 4.03 3.29 2.41 1.96 1.65 1.21 0.98 0.81260 5.57 3.6 2.64 2.14 1.8 1.32 1.08 0.89290 5 3.83 2.81 2.28 1.92 1.41 1.15 0.94
4-pole and brake LSFCR 112FCPL 200
Selection exampleRequired power: 22 kWRequired speed: 50 min-1Duty factor required by the application: Kp = 1Operating position; Mounting form: Horizontal B3; hollow shaft; BT faceplate mountedDesignation: Ot 3633 B3 SBTLR H i: 28.6 MI - 4p LS 180 LR 22 kW - 400V - U.G.
180 225
225100 132 160 180
100 L 1323-phase 4-pole LS
90 L
Ot 3633LS (kW)
3-phase 4-pole LS
160
90
MU obligatory
D6.15
Electromechanical productsOrthobloc
Selection
Ot 3733LS,brakeLS-IP55-Cl.F-230V-400VY400V∆-50Hz-U.G
Integral mounting MIUniversal mounting MUInput shaft mounting AP
ClassesI, II, III
(kp = 1, 1.4, 2)
1.1 1.5 1.8 2.2 3 4 5.5 7.5 9 11 15 18.5 22 30 37 45 55 1
min-1 i exact 112 200 2509.57 152 8.05 5.86 4.91 4 2.93 2.19 1.60 1.18 0.9810.8 135 9.03 6.58 5.5 4.48 3.28 2.46 1.80 1.32 1.1 0.911.8 123 9.88 7.2 6.02 4.91 3.59 2.69 1.97 1.44 1.21 0.9913.3 109 11.14 8.12 6.79 5.54 4.05 3.03 2.22 1.63 1.36 1.11 0.8114.8 98 6.13 4.49 3.36 2.46 1.8 1.51 1.23 0.916.6 87.4 6.86 5.02 3.76 2.75 2.02 1.68 1.38 1.01 0.8218.0 80.4 7.45 5.45 4.08 2.98 2.19 1.83 1.49 1.09 0.8918.8 77.3 13.4 9.76 8.17 6.6621.0 68.9 8.65 6.33 4.74 3.46 2.54 2.12 1.74 1.27 1.03 0.8721.1 68.8 14.25 10.38 8.69 7.08 5.18 3.8822.9 63.2 9.41 6.88 5.15 3.77 2.77 2.31 1.89 1.38 1.12 0.9423.1 62.8 15.89 11.58 9.68 7.89 5.77 4.3225.9 55.9 10.6 7.76 5.81 4.24 3.12 2.6 2.13 1.56 1.27 1.06 0.7826.1 55.5 17.36 12.65 10.56 8.61 6.3 4.7229.0 50 6.76 5.0630.4 47.7 11.87 8.69 6.51 4.75 3.48 2.91 2.38 1.74 1.41 1.19 0.8732.5 44.6 7.30 5.4734.2 42.5 12.89 9.43 7.06 5.15 3.78 3.15 2.58 1.89 1.53 1.29 0.9535.4 41 10.55 7.72 5.78 4.22 3.09 2.5838.1 38.1 2.76 2.03 1.64 1.38 1.01 0.8341.2 35.2 11.69 8.55 6.4 4.67 3.42 2.8642.1 34.4 2.95 2.16 1.75 1.47 1.08 0.8845.0 32.2 12.37 9.05 6.78 4.94 3.63 3.0347.7 30.4 3.19 2.34 1.9 1.6 1.17 0.95 0.7850.8 28.5 13.41 9.81 7.35 5.36 3.93 3.2853.9 26.9 3.44 2.52 2.05 1.72 1.26 1.03 0.8559.5 24.4 14.85 10.87 8.14 5.93 4.35 3.6360.3 24 4.11 3.01 2.44 2.05 1.51 1.23 1.01 0.83 64.3 22.6 4.1 3 2.44 2.05 1.51 1.23 1.01 0.83 66.9 21.7 16.02 11.72 8.77 6.40 4.69 3.92 3.2 2.35 1.9 1.672.9 19.9 4.14 3.03 2.46 2.07 1.52 1.24 1.02 0.83 74.7 19.4 3.43 2.51 2.04 1.72 1.26 1.02 0.8480.9 17.9 11.69 8.55 6.4 4.67 3.42 2.8682.6 17.6 4.07 2.98 2.42 2.03 1.49 1.22 1 0.82 88.2 16.4 12.37 9.05 6.78 4.94 3.63 3.0393.6 15.5 4.22 3.09 2.51 2.11 1.55 1.26 1.04 0.85 99.8 14.5 13.41 9.81 7.35 5.36 3.93 3.28106 13.7 4.26 3.12 2.53 2.13 1.56 1.27 1.04 0.86 117 12.4 14.86 10.87 8.14 5.93 4.35 3.63118 12.3 4.87 3.57 2.89 2.43 1.79 1.45 1.2 0.98 126 11.5 5.05 3.7 3 2.53 1.86 1.51 1.24 1.02 131 11 16.02 11.72 8.78 6.40 4.7 3.92 3.2 2.35 1.9 1.6143 10.1 5.44 3.98 3.23 2.72 2 1.62 1.33 1.1 147 9.9 3.43 2.51 2.04 1.72 1.26 1.02 0.84162 8.95 4.07 2.98 2.42 2.03 1.49 1.21 1 0.82 184 7.9 4.22 3.09 2.51 2.11 1.55 1.26 1.04 0.85 207 6.99 4.25 3.12 2.53 2.13 1.56 1.27 1.04 0.86 232 6.25 4.55 3.33 2.71 2.28 1.67 1.36 1.12 0.92 247 5.86 4.73 3.46 2.81 2.36 1.73 1.41 1.16 0.95 280 5.17 5.08 3.72 3.02 2.54 1.87 1.52 1.25 1.03
4-pole and brake LSFCR 112FCPL 200 2501. LS B35 obligatory
Selection exampleRequired power: 45 kWRequired speed: 93 min-1Duty factor required by the application: Kp = 1Operating position; Mounting form: Horizontal B3; shaft on left; foot mountedDesignation: Ot 3733 B3 S L i: 15.5 MI - 4p LS 225 MR 45 kW - 400V
180
160
225
225
100 L90 L 132 1603-phase 4-pole LS
Ot 3733LS (kW)
3-phase 4-pole LS90 180100 132
- U.G.
MU obligatory
D6.16
Electromechanical productsOrthobloc
Ot 2803LS,brakeLS-IP55-Cl.F-230V-400VY400V∆-50Hz-U.G
Integral mounting MIUniversal mounting MUInput shaft mounting AP
ClassesI, II, III
(kp = 1, 1.4, 2)
Selection
4 5.5 7.5 9 11 15 18.5 22 30 37 45 55 75 90
min-1 i exact
14.2 102 3.624.244.575.285.716.387.288.59.3310.2811.2913.0214.3416.0218.1320.4922.223.66
16.6 87.417.9 8120.7 70.222.4 64.825.1 57.928.6 50.833.2 43.736.8 39.440.6 35.744.6 32.551.2 28.356.9 25.563.6 22.872.2 20.181.8 17.792.5 15.7114 12.7
4-pole and brake LS
FCPL
Selection exampleRequired power: 75 kWRequired speed: 80 min-1Duty factor required by the application: Kp = 1Operating position; Mounting form: Horizontal B3; shaft on left; foot mountedDesignation: Ot 2803 B3 S L i: 17.7 MI - 4p LS 280 SC 75 kW - 400V ∆ - U.G.
280
Ot 2803LS (kW)
3-phase 4-pole LS112 132 160 180 200 225 250
280112 132 160
180 200 225 250FCR
3-phase 4-pole LS
MU obligatory
0.840.971.071.191.351.521.641.75
2.653.13.343.864.174.665.326.216.827.518.259.5210.4811.713.2414.9716.217.26
1.942.282.452.833.063.433.94.565.015.526.066.997.698.599.7310.9911.912.67
1.621.92.052.372.562.863.263.814.184.615.065.846.437.188.129.189.9310.58
1.331.551.681.932.092.342.663.113.423.774.144.775.255.876.647.58.128.64
0.780.870.991.121.211.28
0.820.93
11.07
0.971.141.231.421.531.711.952.282.5
2.763.033.493.854.3
4.865.495.956.33
0.790.92
11.151.241.391.591.852.032.242.462.843.123.493.954.464.835.14
0.840.971.051.171.331.561.711.882.072.392.632.933.323.754.064.32
0.860.981.141.261.381.521.751.932.162.442.762.983.18
0.80.931.021.131.241.431.571.761.992.252.432.59
0.840.931.021.181.291.441.631.85
22.13
1 1 1
1. LS B35 obligatory
D6.17
FA
RAP
EA
YAXA
GC
DA
OA x ZA
Electromechanical productsOrthobloc
Dimensions
Dimensions en millimetres
AP
Type Ø DA EA YA XA FA GC RAP OA x ZAkg
Ot 2803 60m6 105 95 5 18 64 60 M20 x 42 30Ot 3733 48k6 110 90 10 14 51.5 51 M16 x 24 27Ot 3633 48k6 110 90 10 14 51.5 51 M16 x 24 27Ot 3533 28j6 60 50 5 8 31 138.5 M10 x 22 5Ot 3433 28j6 60 50 5 8 31 69 M10 x 22 5Ot 3333 24j6 50 40 4.5 8 27 73 M8 x 19 1.2Ot 3233 24j6 50 40 4.5 8 27 73 M8 x 19 1.5Ot 3232 24j6 50 40 4.5 8 27 73 M10 x 22 1.2Ot 3132 24j6 50 40 4.5 8 27 73 M8 x 19 1.5
Dimensions of the AP input shaft
D6.18
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- SBT LR faceplate form, L* output shaft on left
* R shaft on right option
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3132
Ot: 14 kg+ motor
D6.19
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, L* output shaft on left
* R shaft on right option
- BS L* flange form, L* output shaft on left
* BSR R right option: identical flange and shaft
4-polemotors
Frame size LS LSMV LS FCR, LSMV FCR
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
71 L 140 109 86 217 49 43 43 8.3 140 135 160 217 34 55 55 8.5 140 135 160 268 34 55 55 11.380 L 170 133 90 251 61 43 60 10.9 170 146 160 251 46 55 55 10.8 172 146 160 300 46 55 55 1890 L 190 143 90 294.5 70.5 43 60 15.2 190 156 160 294.5 58.5 55 55 17.3 184 156 160 349.5 58.5 55 55 24.2
100 L 200 148 90 335.5 71.5 43 60 22.5 200 161 160 335.5 59.5 55 55 25.7 200 161 160 397.5 59.5 55 55 30
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg71 L VMA 31T 140 195 218 217 31 75 94 12.580 L VMA 31T 170 205 218 251 45 75 94 15.190 L VMA 31T 190 215 218 294.5 57.5 75 94 19.490 L VMA 32T 190 215 231 294.5 57.5 75 94 19.4100 L VMA 32T 200 220 231 335.5 57.5 75 94 26.7
1. TL, M page D6.55 2. with optional button
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3132
Ot: 14.5 kg+ motor
Ot: 14.8 kg+ motor
D6.20
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3232
Ot: 21.8 kg+ motor
Ot: 23 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, L* output shaft on left
* R shaft on right option
- BD L* flange form, L* output shaft on left
* BDR R right option: identical flange and shaft
D6.21
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, L* output shaft on left
* R shaft on right option
- BS L* flange form, L* output shaft on left
* BSR R right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV1 FCR
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
71 L 140 109 86 217 49 43 43 8.3 140 135 160 217 34 55 55 8.5 140 135 160 268 34 55 55 11.380 L 170 133 90 251 61 43 60 10.9 170 146 160 251 46 55 55 10.8 172 146 160 300 46 55 55 1890 L 190 143 90 294.5 70.5 43 60 15.2 190 156 160 294.5 58.5 55 55 17.3 184 156 160 349.5 58.5 55 55 24.2
100 L 200 148 90 335.5 71.5 43 60 22.5 200 161 160 335.5 59.5 55 55 25.7 200 161 160 397.5 59.5 55 55 30112 200 148 90 335.5 71.5 43 60 24.9 235 169 160 353 61 55 55 33 235 169 160 434 61 55 55 44.5
132 S 200 175 90 376 75 43 60 390 - - - - - - - - 235 169 160 457 61 55 55 481. LSMV 71 FCR ---> LSMV 112 MG FCR
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg71 L VMA 31T 140 195 218 217 31 75 94 12.580 L VMA 31T 170 205 218 251 45 75 94 15.190 L VMA 31T 190 215 218 294.5 57.5 75 94 19.490 L VMA 32T 190 215 231 294.5 57.5 75 94 19.4100 L VMA 32T 200 220 231 335.5 57.5 75 94 26.7
112 MG VMA 32T 235 229 231 353 58 75 94 37.51. TL, M page D6.55 2. with optional button
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3232
Ot: 22 kg+ motot
Ot: 23.3 kg+ motor
D6.22
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3233
Ot: 21 kg+ motor
Ot: 21.7 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, L* output shaft on left
* R shaft on right option
- BD L* flange form, L* output shaft on left
* BDR R right option: identical flange and shaft
D6.23
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, L* output shaft on left
* R shaft on right option
- BS L* flange form, L* output shaft on left
* BSR R right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV1 FCR
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
71 L 140 109 86 217 49 43 43 8.3 140 135 160 217 34 55 55 8.5 140 135 160 268 34 55 55 11.380 L 170 133 90 251 61 43 60 10.9 170 146 160 251 46 55 55 10.8 172 146 160 300 46 55 55 1890 L 190 143 90 294.5 70.5 43 60 15.2 190 156 160 294.5 58.5 55 55 17.3 184 156 160 349.5 58.5 55 55 24.2
100 L 200 148 90 335.5 71.5 43 60 22.5 200 161 160 335.5 59.5 55 55 25.7 200 161 160 397.5 59.5 55 55 301. LSMV 71 FCR ---> LSMV 112 MG FCR
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg71 L VMA 31T 140 195 218 217 31 75 94 12.580 L VMA 31T 170 205 218 251 45 75 94 15.190 L VMA 31T 190 215 218 294.5 57.5 75 94 19.490 L VMA 32T 190 215 231 294.5 57.5 75 94 19.4100 L VMA 32T 200 220 231 335.5 57.5 75 94 26.7
1. TL, M page D6.55 2. with optional button
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3233
Ot: 20.5 kg+ motor
Ot: 22 kg+ motor
D6.24
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3333
Ot: 37 kg+ motor
Ot: 42 kg+ motor
Ot: 51 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, L* output shaft on left
* R shaft on right option
- BD L* flange form, L* output shaft on left
* BDR R right option: identical flange and shaft
- BR R reinforced flange form, R* output shaft on right
* left option: not available
D6.25
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, L* output shaft on left
* R shaft on right option
- BS L* flange form, L* output shaft on left
* BSR R right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV1 FCR
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
71 L 140 109 86 217 49 43 43 8.3 140 135 160 217 34 55 55 8.5 140 135 160 268 34 55 55 11.380 L 170 133 90 251 61 43 60 10.9 170 146 160 251 46 55 55 10.8 172 146 160 300 46 55 55 1890 L 190 143 90 294.5 70.5 43 60 15.2 190 156 160 294.5 58.5 55 55 17.3 184 156 160 349.5 58.5 55 55 24.2
100 L 200 148 90 335.5 71.5 43 60 22.5 200 161 160 335.5 59.5 55 55 25.7 200 161 160 397.5 59.5 55 55 30112 200 148 90 335.5 71.5 43 60 24.9 235 169 160 353 61 55 55 33 235 169 160 434 61 55 55 44.5
132 S 200 175 90 376 75 43 60 390 - - - - - - - - 235 169 160 457 61 55 55 481. LSMV 71 FCR ---> LSMV 112 MG FCR
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg71 L VMA 31T 140 195 218 217 31 75 94 12.580 L VMA 31T 170 205 218 251 45 75 94 15.190 L VMA 31T 190 215 218 294.5 57.5 75 94 19.490 L VMA 32T 190 215 231 294.5 57.5 75 94 19.4100 L VMA 32T 200 220 231 335.5 57.5 75 94 26.7
112 MG VMA 32T 235 229 231 353 58 75 94 37.51. TL, M page D6.55 2. with optional button
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3333
Ot: 38 kg+ motor
Ot: 42 kg+ motor
D6.26
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3433
Ot: 59.5 kg+ motor
Ot: 67 kg+ motor
Ot: 72 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, L* output shaft on left
* R shaft on right option
- BD L* flange form, L* output shaft on left
* BDR R right option: identical flange and shaft
- BR R reinforced flange form, R* output shaft on right
* left option: not available
D6.27
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, L* output shaft on left
* R shaft on right option
- BS L* flange form, L* output shaft on left
* BSR R right option: identical flange and shaft
4-polemotors
Frame sizeLS LSMV LS FCR, LSMV FCR
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
71 L 140 109 86 213 45 43 43 8.3 140 135 160 213 30 55 55 8.5 140 135 160 264 30 55 55 11.380 L 170 133 90 247 57 43 60 10.9 170 146 160 247 42 55 55 10.8 172 146 160 296 42 55 55 1890 L 190 143 90 290.5 67.5 43 60 15.2 190 156 160 290.5 54.5 55 55 17.3 184 156 160 345.5 54.5 55 55 24.2
100 L 200 148 90 331.5 67.5 43 60 22.5 200 161 160 331.5 55.5 55 55 25.7 200 161 160 393.5 55.5 55 55 30112 200 148 90 331.5 67.5 43 60 24.9 235 169 160 349 58 55 55 33 235 169 160 430 58 55 55 44.5
132 S 200 175 90 372 41 43 60 39 - - - - - - - - 235 169 160 453 57 55 55 48132 M 280 175 110 433 73 57 73 60 280 188 160 433 73 55 55 65 280 188 160 541 73 55 55 80
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg71 L VMA 31T 140 195 218 213 27 75 94 12.580 L VMA 31T 170 205 218 247 41 75 94 15.190 L VMA 31T 190 215 218 290.5 53.5 75 94 19.490 L VMA 32T 190 215 231 290.5 53.5 75 94 19.4100 L VMA 32T 200 220 231 331.5 53.5 75 94 26.7
112MG VMA 32T 235 229 231 349 55.5 75 94 37.5132SM VMA 33T 280 300 336 433 56 115 141 64.4132 M VMA 33T 280 300 336 433 56 115 141 70.4132 M VMA 34T 280 300 336 5133 56 115 141 78.13
1. TL, M page D6.55 2. with optional button 3. axial forced ventilation included
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3433
Ot: 60 kg+ motor
Ot: 68 kg+ motor
D6.28
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3533
Ot: 82 kg+ motor
Ot: 93 kg+ motor
Ot: 120 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, L* output shaft on left
* R shaft on right option
- BD L* flange form, L* output shaft on left
* BDR Rright option: identical flange and shaft
- BR R reinforced flange form, R* output shaft on right
* left option: not available
D6.29
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, L* output shaft on left
* R shaft on right option
- BS L* flange form, L* output shaft on left
* BSR R right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV FCR-LSFCPL1
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
80 L 170 133 090 251.5 59.5 43 60 10.9 170 146 160 251.5 46.5 55 55 10.8 172 146 160 300.5 46.5 55 55 1890 L 190 143 090 290.5 65.5 43 60 15.2 190 156 160 290.5 54.5 55 55 17.3 184 156 160 345.5 54.5 55 55 24.2
100 L 200 148 090 329.5 66.5 43 60 22.5 200 161 160 329.5 55.5 55 55 25.7 200 161 160 393.5 55.5 55 55 30112 200 148 090 329.5 66.5 43 60 24.9 235 169 160 353 61 55 55 33 235 169 160 434 61 55 55 44.5
132 M 280 175 110 437 77 57 73 60 280 188 160 437 77 55 55 65 280 188 160 545 77 55 55 80160 316 208 134 547 96 92 63 86 316 235 134 529 63 92 63 110 316 231 160 620 96 55 55 110180 316 249 205 539 54 100 95 112 350 256 186 606 76 111.5 98 165 345 235 134 696 57 92 63 155
1. FCR : LS 80 ---> LS 160 LR (15 kW), LSMV 80 ---> LSMV 160 MR (11 kW) ; FCPL : LS 180
LSMV FCPL
Frame size AC HJ J LB LJ I IIkg
160 LU 345 235 134 696 57 92 63 155180 LU 384 255 186 792 76.5 111.5 98 210
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg80 L VMA 31T 170 205 218 251.5 45.5 75 94 15.190 L VMA 31T 190 215 218 290.5 53.5 75 94 19.490 L VMA 32T 190 215 231 290.5 53.5 75 94 19.4100 L VMA 32T 200 220 231 329.5 53.5 75 94 26.7
112MG VMA 32T 235 229 231 353 58 75 94 37.5132SM VMA 33T 280 300 336 437 60 115 141 64.4132 M VMA 33T 280 300 336 437 60 115 141 70,4132 M VMA 34T 280 300 336 5173 57 115 141 783
160 MR VMA 34T 316 309 336 7473 47 115 141 923
1. TL, M page D6.55 2. with optional button 3. axial forced ventilation included
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3533
Ot: 83 kg+ motor
Ot: 94 kg+ motor
D6.30
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3633
Ot: 196 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, L* output shaft on left
* SBT LR R right option: identical faceplate form and shaft
D6.31
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, L* output shaft on left
* R shaft on right option
- BS L* flange form, L* output shaft on left
* BSR R right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV FCR-LSFCPL1
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
90 L 190 143 090 276.5 51.5 43 60 15.2 190 156 160 276.5 48.5 55 55 17.3 184 156 160 331.5 48.5 55 55 24.2100 L 200 148 090 318 55 43 60 22.5 200 161 160 318 52 55 55 25.7 200 161 160 382 52 55 55 30112 200 148 090 318 55 43 60 24.9 235 169 160 335 51 55 55 33 235 169 160 421 51 55 55 44.5
132 M 280 175 110 419 59 57 73 60 280 188 160 419 66.5 55 55 65 280 188 160 527 66.5 55 55 80160 316 208 134 491 39 92 63 86 316 235 134 491 58 92 63 110 316 231 160 564 58 55 55 110180 316 249 205 515 39 100 95 112 350 256 186 557 39 111.5 98 165 345 235 134 678 39 92 63 150200 350 256 205 624 58.5 100 95 165 390 276 186 654 84.5 111.5 98 190 384 256 186 774 84.5 111 98 240225 390 276 205 675 82 100 95 235 479 405 292 822 82 148 180 325 410 276 186 837 82 111 98 320
1. FCR : LS 90 ---> LS 160 LR (15 kW), LSMV 90 ---> LSMV 160 MR (11 kW) ; FCPL : LS 180 ---> LS 280 MP
LSMV FCPL
Frame size AC HJ J LB LJ I IIkg
160 LU 345 235 134 684 39 92 63 155180 384 256 186 720 39 111.5 98 210200 410 276 186 804 84.5 111.5 98 260225 410 276 292 984 82 148 180 400
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg90 L VMA 31T 190 215 218 276.5 38 75 94 19.490 L VMA 32T 190 215 231 276.5 38 75 94 19.4100 L VMA 32T 200 220 231 318 41.5 75 94 26.7
112 MG VMA 32T 235 229 231 335 40.5 75 94 37.5132 SM VMA 33T 280 300 336 419 56 115 141 64.4132 M VMA 33T 280 300 336 419 56 115 141 70.4132 M VMA 34T 280 300 336 4993 39 115 141 783
160 MR VMA 34T 316 309 336 7313 31 115 141 923
1. TL, M page D6.55 2. with optional button 3. axial forced ventilation included
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3633
Ot: 198 kg+ motor
Ot: 226 kg+ motor
D6.32
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3733
Ot: 303 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, L* output shaft on left
* SBT LR R right option: identical faceplate form and shaft
D6.33
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, L* output shaft on left
1. through holes* R shaft on right option
- BS L* flange form, L* output shaft on left
* BSR R right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV FCR-LSFCPL1
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
90 L 190 143 90 276.5 51.5 43 60 15.2 190 156 160 276.5 48.5 55 55 17.3 184 156 160 331.5 48.5 55 55 24.2100 L 200 148 90 318 55 43 60 22.5 200 161 160 318 52 55 55 25.7 200 161 160 382 52 55 55 30112 200 148 090 318 55 43 60 24.9 235 169 160 335 51 55 55 33 235 169 160 421 51 55 55 44.5
132 M 280 175 110 419 59 57 73 60 280 188 160 419 66.5 55 55 65 280 188 160 527 66.5 55 55 80160 316 208 134 491 39 92 63 86 316 235 134 491 58 92 63 110 316 231 160 564 58 55 55 110180 316 249 205 515 39 100 95 112 350 256 186 557 39 111.5 98 165 345 235 134 678 39 92 63 150200 350 256 205 624 58.5 100 95 165 390 276 186 654 84.5 111.5 98 190 384 256 186 774 84.5 111 98 240225 390 276 205 675 82 100 95 235 479 405 292 822 82 148 180 325 410 276 186 837 82 111 98 320
1. FCR : LS 90 ---> LS 160 LR (15 kW), LSMV 90 ---> LSMV 160 MR (11 kW) ; FCPL : LS 180 ---> LS 280 MP
LSMV FCPL
Frame size AC HJ J LB LJ I IIkg
160 LU 345 235 134 684 39 92 63 155180 384 256 186 720 39 111.5 98 210200 410 276 186 804 84.5 111.5 98 260225 410 276 292 984 82 148 180 400
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg90 L VMA 31T 190 215 218 276.5 38 75 94 19.490 L VMA 32T 190 215 231 276.5 38 75 94 19.4100 L VMA 32T 200 220 231 318 41.5 75 94 26.7
112 MG VMA 32T 235 229 231 335 40.5 75 94 37.5132 SM VMA 33T 280 300 336 419 56 115 141 64.4132 M VMA 33T 280 300 336 419 56 115 141 70.4132 M VMA 34T 280 300 336 4993 39 115 141 783
160 MR VMA 34T 316 309 336 7313 31 115 141 923
1. TL, M page D6.55 2. with optional button 3. axial forced ventilation included
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3733
Ot: 306 kg+ motor
Ot: 336 kg+ motor
D6.34
Electromechanical productsOrthobloc
Dimensions in millimetres
- BRR reinforced flange form, R* output shaft on right
* left option: not available
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 2803
Ot: 350 kg+ motor
D6.35
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 2803
Ot: 320 kg+ motor
Dimensions in millimetres
- S foot mounted form, L* output shaft on left
* R shaft on right option
- BSL* flange form, L* output shaft on left
* BSR R right option: identical flange and shaft
4-polesmotors
Frame size
LS LSMV LS FCR, LSMV FCR-LSFCPL1
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
112 200 148 90 326 62 43 60 24.9 235 169 160 344 53 55 55 33 235 169 160 425 53 55 55 44.5132 M 280 175 110 427 65 57 73 60 280 188 160 427 65 55 55 65 280 188 160 533 65 55 55 90160 316 208 134 535 84 92 63 86 316 235 160 537 44 55 55 110 316 213 160 568 44 55 55 110180 316 249 186 547 81 111 98 112 350 256 186 599 69 111 98 165 345 235 134 710 72 92 63 150200 350 256 186 598 69 111 98 165 390 276 186 634 90 111 98 190 384 256 186 828 69 111 98 240225 390 276 186 682.5 90 111 98 235 479 405 292 810 68 148 180 325 410 276 186 912 83 111 98 320250 479 405 292 810 68 148 180 340 479 405 292 810 68 148 180 355 481 404 292 1180 68 148 180 400280 479 405 292 870 68 148 180 490 586 466 292 921 99 148 180 690 505 404 292 1246 68 148 180 620
1. FCR : LS 112 ---> LS 160 LR (15 kW), LSMV 112 ---> LSMV 160 MR (11 kW) ; FCPL : LS 180 ---> LS 280 MP
LSMV FCPL
Frame size AC HJ J LB LJ I IIkg
160 LU 345 235 134 710 72 92 63 155180 LU 384 256 186 785 69 111 98 210200 L 410 276 186 912 83 111 98 260
225 MG 481 404 292 1180 68 148 180 400250 ME 481 404 292 1180 68 148 180 420280 MK 505 404 292 1246 68 148 180 860
LSMV VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg112 MG VMA 32T 235 229 231 344 49 75 94 37.5132 SM VMA 33T 280 300 336 427 48 115 141 64.4132 M VMA 33T 280 300 336 427 48 115 141 70.4132 M VMA 34T 280 300 336 427 48 115 141 73160 MR VMA 34T 316 309 336 608 78 115 141 87
1. TL, M page D6.55 2. with optional button
D6.36
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3132
Ot: 14 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, H cylindrical hollow shaft
- H hollow shaft details
- Option: shrink disc on right SDR*
* left SDL
D6.37
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, H cylindrical hollow shaft
- BS L* flange form, H cylindrical hollow shaft
* BSR H right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV FCR
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
71 L 140 109 86 217 49 43 43 8.3 140 135 160 217 34 55 55 8.5 140 135 160 268 34 55 55 11.380 L 170 133 90 251 61 43 60 10.9 170 146 160 251 46 55 55 10.8 172 146 160 300 46 55 55 1890 L 190 143 90 294.5 70.5 43 60 15.2 190 156 160 294.5 58.5 55 55 17.3 184 156 160 349.5 58.5 55 55 24.2
100 L 200 148 90 335.5 71.5 43 60 22.5 200 161 160 335.5 59.5 55 55 25.7 200 161 160 397.5 59.5 55 55 30
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg71 L VMA 31T 140 195 218 217 31 75 94 12.580 L VMA 31T 170 205 218 251 45 75 94 15.190 L VMA 31T 190 215 218 294.5 57.5 75 94 19.490 L VMA 32T 190 215 231 294.5 57.5 75 94 19.4100 L VMA 32T 200 220 231 335.5 57.5 75 94 26.7
1. TL, M page D6.55 2. with optional button
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3132
Ot: 14.5 kg+ motor
Ot: 14.8 kg+ motor
D6.38
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3232
Ot : 21.8 kg+ motor
Ot: 23 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, H cylindrical hollow shaft
- BD L* flange form, H cylindrical hollow shaft
* BDR H right option: identical flange and shaft
- H hollow shaft details - Option: shrink disc on right SDR*
* left SDL
D6.39
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, H cylindrical hollow shaft
- BS L* flange form, H cylindrical hollow shaft
* BSR H right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV1 FCR
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
71 L 140 109 86 217 49 43 43 8.3 140 135 160 217 34 55 55 8.5 140 135 160 268 34 55 55 11.380 L 170 133 90 251 61 43 60 10.9 170 146 160 251 46 55 55 10.8 172 146 160 300 46 55 55 1890 L 190 143 90 294.5 70.5 43 60 15.2 190 156 160 294.5 58.5 55 55 17.3 184 156 160 349.5 58.5 55 55 24.2
100 L 200 148 90 335.5 71.5 43 60 22.5 200 161 160 335.5 59.5 55 55 25.7 200 161 160 397.5 59.5 55 55 30112 200 148 90 335.5 71.5 43 60 24.9 235 169 160 353 61 55 55 33 235 169 160 434 61 55 55 44.5
132 S 200 175 90 376 75 43 60 390 - - - - - - - - 235 169 160 457 61 55 55 481. LSMV 71 FCR ---> LSMV 112 MG FCR
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg71 L VMA 31T 140 195 218 217 31 75 94 12.580 L VMA 31T 170 205 218 251 45 75 94 15.190 L VMA 31T 190 215 218 294.5 57.5 75 94 19.490 L VMA 32T 190 215 231 294.5 57.5 75 94 19.4100 L VMA 32T 200 220 231 335.5 57.5 75 94 26.7
112 MG VMA 32T 235 229 231 353 58 75 94 37.51. TL, M page D6.55 2. with optional button
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3232
Ot: 22 kg+ motor
Ot: 23.3 kg+ motor
D6.40
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3233
Ot: 20.5 kg+ motor
Ot: 21.7 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, H cylindrical hollow shaft
- BD L* flange form, H cylindrical hollow shaft
* BDR H right option: identical flange and shaft
- H hollow shaft details - Option: shrink disc on right SDR*
* left SDLKeying on driven shaft: according to NF E22-175
D6.41
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, H cylindrical hollow shaft
- BS L* flange form, H cylindrical hollow shaft
* BSR H right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV FCR
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
71 L 140 109 86 217 49 43 43 8.3 140 135 160 217 34 55 55 8.5 140 135 160 268 34 55 55 11.380 L 170 133 90 251 61 43 60 10.9 170 146 160 251 46 55 55 10.8 172 146 160 300 46 55 55 1890 L 190 143 90 294.5 70.5 43 60 15.2 190 156 160 294.5 58.5 55 55 17.3 184 156 160 349.5 58.5 55 55 24.2
100 L 200 148 90 335.5 71.5 43 60 22.5 200 161 160 335.5 59.5 55 55 25.7 200 161 160 397.5 59.5 55 55 30
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg71 L VMA 31T 140 195 218 217 31 75 94 12.580 L VMA 31T 170 205 218 251 45 75 94 15.190 L VMA 31T 190 215 218 294.5 57.5 75 94 19.490 L VMA 32T 190 215 231 294.5 57.5 75 94 19.4100 L VMA 32T 200 220 231 335.5 57.5 75 94 26.7
1. TL, M page D6.55 2. with optional button
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3233
Ot: 21 kg+ motor
Ot: 22 kg+ motor
D6.42
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3333
Ot: 36 kg+ motor
Ot: 40 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, H cylindrical hollow shaft
- BD L* flange form, H cylindrical hollow shaft
* BDR H right option: identical flange and shaft
- H hollow shaft details - Option: shrink disc on right SDR*
* left SDLKeying on driven shaft: according to NF E22-175
D6.43
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, H cylindrical hollow shaft
- BS L* flange form, H cylindrical hollow shaft
* BSR H right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV1 FCR
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
71 L 140 109 86 217 49 43 43 8.3 140 135 160 217 34 55 55 8.5 140 135 160 268 34 55 55 11.380 L 170 133 90 251 61 43 60 10.9 170 146 160 251 46 55 55 10.8 172 146 160 300 46 55 55 1890 L 190 143 90 294.5 70.5 43 60 15.2 190 156 160 294.5 58.5 55 55 17.3 184 156 160 349.5 58.5 55 55 24.2
100 L 200 148 90 335.5 71.5 43 60 22.5 200 161 160 335.5 59.5 55 55 25.7 200 161 160 397.5 59.5 55 55 30112 200 148 90 335.5 71.5 43 60 24.9 235 169 160 353 61 55 55 33 235 169 160 434 61 55 55 44.5
132 S 200 175 90 376 75 43 60 390 - - - - - - - - 235 169 160 457 61 55 55 481. LSMV 71 FCR ---> LSMV 112 MG FCR
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg71 L VMA 31T 140 195 218 217 31 75 94 12.580 L VMA 31T 170 205 218 251 45 75 94 15.190 L VMA 31T 190 215 218 294.5 57.5 75 94 19.490 L VMA 32T 190 215 231 294.5 57.5 75 94 19.4100 L VMA 32T 200 220 231 335.5 57.5 75 94 26.7
112 MG VMA 32T 235 229 231 353 58 75 94 37.51. TL, M page D6.55 2. with optional button
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3333
Ot: 37 kg+ motor
Ot: 40 kg+ motor
D6.44
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3433
Ot: 58 kg+ motor
Ot: 65 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, H cylindrical hollow shaft
- BD L* flange form, H cylindrical hollow shaft
* BDR H right option: identical flange and shaft
- H hollow shaft details - Option: shrink disc on right SDR*
* left SDLKeying on driven shaft: according to NF E22-175
D6.45
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, H cylindrical hollow shaft
- BS L* flange form, H cylindrical hollow shaft
* BSR H right option: identical flange and shaft
4-polemotors
Frame sizeLS LSMV LS FCR, LSMV FCR
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
71 L 140 109 86 213 45 43 43 8.3 140 135 160 213 30 55 55 8.5 140 135 160 264 30 55 55 11.380 L 170 133 90 247 57 43 60 10.9 170 146 160 247 42 55 55 10.8 172 146 160 296 42 55 55 1890 L 190 143 90 290.5 67.5 43 60 15.2 190 156 160 290.5 54.5 55 55 17.3 184 156 160 345.5 54.5 55 55 24.2
100 L 200 148 90 331.5 67.5 43 60 22.5 200 161 160 331.5 55.5 55 55 25.7 200 161 160 393.5 55.5 55 55 30112 200 148 90 331.5 67.5 43 60 24.9 235 169 160 349 58 55 55 33 235 169 160 430 58 55 55 44.5
132 S 200 175 90 372 41 43 60 39 - - - - - - - - 235 169 160 453 57 55 55 48132 M 280 175 110 433 73 57 73 60 280 188 160 433 73 55 55 65 280 188 160 541 73 55 55 80
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg71 L VMA 31T 140 195 218 213 27 75 94 12.580 L VMA 31T 170 205 218 247 41 75 94 15.190 L VMA 31T 190 215 218 290.5 53.5 75 94 19.490 L VMA 32T 190 215 231 290.5 53.5 75 94 19.4100 L VMA 32T 200 220 231 331.5 53.5 75 94 26.7
112MG VMA 32T 235 229 231 349 55.5 75 94 37.5132SM VMA 33T 280 300 336 433 56 115 141 64.4132 M VMA 33T 280 300 336 433 56 115 141 70.4132 M VMA 34T 280 300 336 5133 56 115 141 78.13
1. TL, M page D6.55 2. with optional button 3. axial forced ventilation included
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3433
Ot: 58.5 kg+ motor
Ot: 66 kg+ motor
D6.46
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3533
Ot: 80 kg+ motor
Ot: 89 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, H cylindrical hollow shaft
- BD L* flange form, H cylindrical hollow shaft
* BDR H right option: identical flange and shaft
- H hollow shaft details - Option: shrink disc on right SDR*
* left SDLKeying on driven shaft: according to NF E22-175
D6.47
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, H cylindrical hollow shaft
- BS L* flange form, H cylindrical hollow shaft
* BSR H right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV FCR-LSFCPL1
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
80 L 170 133 090 251.5 59.5 43 60 10.9 170 146 160 251.5 46.5 55 55 10.8 172 146 160 300.5 46.5 55 55 1890 L 190 143 090 290.5 65.5 43 60 15.2 190 156 160 290.5 54.5 55 55 17.3 184 156 160 345.5 54.5 55 55 24.2
100 L 200 148 090 329.5 66.5 43 60 22.5 200 161 160 329.5 55.5 55 55 25.7 200 161 160 393.5 55.5 55 55 30112 200 148 090 329.5 66.5 43 60 24.9 235 169 160 353 61 55 55 33 235 169 160 434 61 55 55 44.5
132 M 280 175 110 437 77 57 73 60 280 188 160 437 77 55 55 65 280 188 160 545 77 55 55 80160 316 208 134 547 96 92 63 86 316 235 134 529 63 92 63 110 316 231 160 620 96 55 55 110180 316 249 205 539 54 100 95 112 350 256 186 606 76 111.5 98 165 345 235 134 696 57 92 63 155
1. FCR : LS 80 ---> LS 160 LR (15 kW), LSMV 80 ---> LSMV 160 MR (11 kW) ; FCPL : LS 180
LSMV FCPL
Frame size AC HJ J LB LJ I IIkg
160 LU 345 235 134 696 57 92 63 155180 LU 384 255 186 792 76.5 111.5 98 210
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg80 L VMA 31T 170 205 218 251.5 45.5 75 94 15.190 L VMA 31T 190 215 218 290.5 53.5 75 94 19.490 L VMA 32T 190 215 231 290.5 53.5 75 94 19.4100 L VMA 32T 200 220 231 329.5 53.5 75 94 26.7
112MG VMA 32T 235 229 231 353 58 75 94 37.5132SM VMA 33T 280 300 336 437 60 115 141 64.4132 M VMA 33T 280 300 336 437 60 115 141 70.4132 M VMA 34T 280 300 336 5173 57 115 141 783
160 MR VMA 34T 316 309 336 7473 47 115 141 923
1. TL, M page D6.55 2. with optional button 3. axial forced ventilation included
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3533
Ot: 82 kg+ motor
Ot: 91 kg+ motor
D6.48
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3633
Ot: 186 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, H cylindrical hollow shaft
- H hollow shaft details
- Option: shrink disc on right SDR*
* left SDL
D6.49
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, H cylindrical hollow shaft
- BS L* flange form, H cylindrical hollow shaft
* BSR H right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV FCR-LSFCPL1
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
90 L 190 143 090 276.5 51.5 43 60 15.2 190 156 160 276.5 48.5 55 55 17.3 184 156 160 331.5 48.5 55 55 24.2100 L 200 148 090 318 55 43 60 22.5 200 161 160 318 52 55 55 25.7 200 161 160 382 52 55 55 30112 200 148 090 318 55 43 60 24.9 235 169 160 335 51 55 55 33 235 169 160 421 51 55 55 44.5
132 M 280 175 110 419 59 57 73 60 280 188 160 419 66.5 55 55 65 280 188 160 527 66.5 55 55 80160 316 208 134 491 39 92 63 86 316 235 134 491 58 92 63 110 316 231 160 564 58 55 55 110180 316 249 205 515 39 100 95 112 350 256 186 557 39 111.5 98 165 345 235 134 678 39 92 63 150200 350 256 205 624 58.5 100 95 165 390 276 186 654 84.5 111.5 98 190 384 256 186 774 84.5 111 98 240225 390 276 205 675 82 100 95 235 479 405 292 822 82 148 180 325 410 276 186 837 82 111 98 320
1. FCR : LS 90 ---> LS 160 LR (15 kW), LSMV 90 ---> LSMV 160 MR (11 kW) ; FCPL : LS 180 ---> LS 280 MP
LSMV FCPL
Frame size AC HJ J LB LJ I IIkg
160 LU 345 235 134 684 39 92 63 155180 384 256 186 720 39 111.5 98 210200 410 276 186 804 84.5 111.5 98 260225 410 276 292 984 82 148 180 400
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg90 L VMA 31T 190 215 218 276.5 38 75 94 19.490 L VMA 32T 190 215 231 276.5 38 75 94 19.4100 L VMA 32T 200 220 231 318 41.5 75 94 26.7
112 MG VMA 32T 235 229 231 335 40.5 75 94 37.5132 SM VMA 33T 280 300 336 419 56 115 141 64.4132 M VMA 33T 280 300 336 419 56 115 141 70.4132 M VMA 34T 280 300 336 4993 39 115 141 783
160 MR VMA 34T 316 309 336 7313 31 115 141 923
1. TL, M page D6.55 2. with optional button 3. axial forced ventilation included
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3633
Ot: 188 kg+ motor
Ot: 216 kg+ motor
D6.50
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3733
Ot: 289 kg+ motor
Dimensions in millimetres
- SBT LR faceplate form, H cylindrical hollow shaft
- H hollow shaft details
- Option: shrink disc on right SDR*
* left SDL
D6.51
Electromechanical productsOrthobloc
Dimensions
Dimensions in millimetres
- S foot mounted form, H cylindrical hollow shaft
- BS L* flange form, H cylindrical hollow shaft
* BSR H right option: identical flange and shaft
4-polemotors
Frame size
LS LSMV LS FCR, LSMV FCR-LSFCPL1
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
90 L 190 143 90 276.5 51.5 43 60 15.2 190 156 160 276.5 48.5 55 55 17.3 184 156 160 331.5 48.5 55 55 24.2100 L 200 148 90 318 55 43 60 22.5 200 161 160 318 52 55 55 25.7 200 161 160 382 52 55 55 30112 200 148 90 318 55 43 60 24.9 235 169 160 335 51 55 55 33 235 169 160 421 51 55 55 44.5
132 M 280 175 110 419 59 57 73 60 280 188 160 419 66.5 55 55 65 280 188 160 527 66.5 55 55 80160 316 208 134 491 39 92 63 86 316 235 134 491 58 92 63 110 316 231 160 564 58 55 55 110180 316 249 205 515 39 100 95 112 350 256 186 557 39 111.5 98 165 345 235 134 678 39 92 63 150200 350 256 205 624 58.5 100 95 165 390 276 186 654 84.5 111.5 98 190 384 256 186 774 84.5 111 98 240225 390 276 205 675 82 100 95 235 479 405 292 822 82 148 180 325 410 276 186 837 82 111 98 320
1. FCR : LS 90 ---> LS 160 LR (15 kW), LSMV 90 ---> LSMV 160 MR (11 kW) ; FCPL : LS 180 ---> LS 280 MP
LSMV FCPL
Frame size AC HJ J LB LJ I IIkg
160 LU 345 235 134 684 39 92 63 155180 384 256 186 720 39 111.5 98 210200 410 276 186 804 84.5 111.5 98 260225 410 276 292 984 82 148 180 400
LS VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg90 L VMA 31T 190 215 218 276.5 38 75 94 19.490 L VMA 32T 190 215 231 276.5 38 75 94 19.4100 L VMA 32T 200 220 231 318 41.5 75 94 26.7
112 MG VMA 32T 235 229 231 335 40.5 75 94 37.5132 SM VMA 33T 280 300 336 419 56 115 141 64.4132 M VMA 33T 280 300 336 419 56 115 141 70.4132 M VMA 34T 280 300 336 4993 39 115 141 783
160 MR VMA 34T 316 309 336 7313 31 115 141 923
1. TL, M page D6.55 2. with optional button 3. axial forced ventilation included
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 3733
Ot: 292 kg+ motor
Ot: 322 kg+ motor
D6.52
Electromechanical productsOrthobloc
Dimensions in millimetres
- H hollow shaft details
- Option: shrink disc on right SDR*
* left SDL
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 2803
Ot: 375 kg+ motor
D6.53
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MI integral mounting, Ot 2803
Ot: 370 kg+ motor
Dimensions in millimetres
- S foot mounted form, H hollow shaft
- SBT LR* faceplate form, H hollow shaft
* 2 identical flanges
4-polemotors
Frame size
LS LSMV LS FCR, LSMV FCR-LSFCPL1
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
AC HJ J LB LJ I IIkg
112 200 148 90 326 62 43 60 24.9 235 169 160 344 53 55 55 33 235 169 160 425 53 55 55 44.5132 M 280 175 110 427 65 57 73 60 280 188 160 427 65 55 55 65 280 188 160 533 65 55 55 90160 316 208 134 535 84 92 63 86 316 235 160 537 44 55 55 110 316 213 160 568 44 55 55 110180 316 249 186 547 81 111 98 112 350 256 186 599 69 111 98 165 345 235 134 710 72 92 63 150200 350 256 186 598 69 111 98 165 390 276 186 634 90 111 98 190 384 256 186 828 69 111 98 240225 390 276 186 682.5 90 111 98 235 479 405 292 810 68 148 180 325 410 276 186 912 83 111 98 320250 479 405 292 810 68 148 180 340 479 405 292 810 68 148 180 355 481 404 292 1180 68 148 180 400280 479 405 292 870 68 148 180 490 586 466 292 921 99 148 180 690 505 404 292 1246 68 148 180 620
1. FCR : LS 112 ---> LS 160 LR (15 kW), LSMV 112 ---> LSMV 160 MR (11 kW) ; FCPL : LS 180 ---> LS 280 MP
LSMV FCPL
Frame size AC HJ J LB LJ I IIkg
160 LU 345 235 134 710 72 92 63 155180 LU 384 256 186 785 69 111 98 210200 L 410 276 186 912 83 111 98 260
225 MG 481 404 292 1180 68 148 180 400250 ME 481 404 292 1180 68 148 180 420280 MK 505 404 292 1246 68 148 180 860
LSMV VARMECA T, TL, M
Frame size AC HJ J1 LB LJ I II2
kg112 MG VMA 32T 235 229 231 344 49 75 94 37.5132 SM VMA 33T 280 300 336 427 48 115 141 64.4132 M VMA 33T 280 300 336 427 48 115 141 70.4132 M VMA 34T 280 300 336 427 48 115 141 73160 MR VMA 34T 316 309 336 608 78 115 141 87
1. TL, M page D6.55 2. with optional button
Ot: 340 kg+ motor
D6.54
Electromechanical productsOrthobloc
Dimensions
Dimensions of Orthobloc (Ot) gearboxes, MU universal mounting
Dimensions in millimetres
E
RU
n / MU
Ø P
U
Ø B
Ø CØ D
Ø M
UØ
NU
LB
α
LS IM 3001 U-mountsFr. size (IM B5) IEC Ot 31-- Ot 32-- Ot 33-- Ot 34-- Ot 35-- Ot 36-- Ot 37-- Ot 28--
Ø D E LB LB brakes1 Ø MU (FF) Ø NU Ø PU n α° Ø C RU Ø C RU Ø C RU Ø C RU Ø C RU Ø C RU Ø C RU Ø C RU71 14 30 183 271 130 110 160 4 45 65 122 65 122 65 122 65 118 65 122 - - - - - -80 19 40 215 292 165 130 200 4 45 65 130 65 130 65 130 65 126 65 130 - - - - - -90 24 50 265 324 165 130 200 4 45 65 130 65 130 65 130 65 126 65 130 - - - - - -100 28 60 290 388 215 180 250 4 45 65 144 65 144 65 140 65 140 65 144 65 148 65 148 - -112 28 60 290 425 215 180 250 4 45 65 144 65 144 65 144 65 140 65 144 65 148 65 148 130 230132 38 80 387 532 265 230 300 4 45 - - - - - - 65 162 65 169 65 167 65 167 130 250160 42 110 495 567 300 250 350 4 45 - - - - - - - - 95 194 95 199 95 199 130 280180 48 110 520 683 300 250 350 4 45 - - - - - - - - 95 194 95 199 95 199 130 280200 55 110 599 828 350 300 400 4 45 - - - - - - - - 95 194 95 199 95 199 130 2802252 60 140 676 953 400 350 450 8 22.5 - - - - - - - - - - 120 311 120 311 158 3102502 65 140 749 1180 500 450 550 8 22.5 - - - - - - - - - 120 306 120 306 158 3102802 75 140 836 1246 500 450 550 8 22.5 - - - - - - - - - - - - - - 158 310
1. FCR brake: 71 ---> LSMV 160 ; FCPL brake: 180 ---> 280 MP
2. Horizontally mounted foot and flange mounted motors (B35). Provision of a motor support is recommended.
Ot31-- 32- - 33- - 34- - 35- - 36-- 37-- 28--
MU max (kg) 4 4 8 14 20 75 75 95
LS max (kg) 65 65 70 120 150 350 350 450
D6.55
Electromechanical productsOrthobloc
Dimensions
Dimensions of IEC LS, VARMECA motors
Dimensions in millimetres
HJ
M
n x S
a
LA
LB
T
N P
j6
J LJ
AC
II I
4-polemotors
TypeLS VARMECA LS VARMECA FCR
AC LB HJ LJ J I II1 LB LJ
LS71-VMA31T,TL,M 140 193 176 10 218 75 94 271 34LS80L-VMA31T,TL 170 215 190 12 218 75 94 292 38LS80L-VMA32TL,M 170 215 190 12 231 75 94 292 38LS90L-VMA31T 190 265 200 32 218 75 94 324 12
LS90L-VMA32T,TL,M 190 265 200 32 231 75 94 324 12LS100L-VMA32T,TL 200 290 205 12 231 75 94 388 48LS100L-VMA33TL 200 290 270 4 336 115 141 388 40
LSMV112MG-VMA32T 235 315 213 21 231 75 94 425 50LSMV112MG-VMA33TL 235 315 280 13 336 115 141 425 42
LSMV132SM-VMA33T/34TL 280 387 300 30 336 115 141 532 48LSMV132M-VMA33T/34T,TL 280 4652 300 5 336 115 141 712 48
LSMV160MR-VMA34T 315 7352 309 34.8 336 115 141 747 38.5
1. with optional button 2. axial forced ventilation included
Flanges
Type IEC M N P T n a S LA
LS 71 FF 130 130 110 160 3.5 4 45° 10 10 LS 80 L FF 165 165 130 200 3.5 4 45° 12 10 LS 90 L FF 165 165 130 200 3.5 4 45° 12 10
LS 100 L FF 215 215 180 250 4 4 45° 15 12 LSMV 112 MG FF 215 215 180 250 4 4 45° 15 12
LSMV 132 SM/M FF 265 265 230 300 4 4 45° 15 14 LSMV 160 MR FF 300 300 250 350 5 4 45° 18.5 14
D6.56
Electromechanical productsOrthobloc
Dimensions in millimetresF
C Max.
C1 L Max.
R
45°
30°
C3C2
2j 2
Ø D
j6
Ø D
j6
Ø 2
Max
i Ø1 ±
0,2
Driven shaftType C C1 C2 C3 D F j L Ø1 Ø2 R
Ot 2803 380 20 120 310 95 25 86 340 94.5 130 1.6Ot 3733 290 20 105 275 90 25 81 280 89.5 120 1.6Ot 3633 265 20 75 250 70 20 62.5 255 69.5 100 1.6Ot 3533 200 15 90 179 60 18 53 175 59.5 65 0.8Ot 3433 185 15 50 176 50 14 44.5 160 49.5 65 0.8Ot 3333 145 15 40 133 40 12 35 120 39.5 55 0.8
Ot 3232/33 120 15 42 109 35 10 30 95 34.5 50 0.8Ot 3132 105 15 32 100 30 8 26 85 29.5 45 0.8
Dimensions
Driven shaft
RLU
RLD
RLF
S1
LB
J
ØAC
HJ
LJ
Torque arm RType Ø D Ø DE Ø DR DR1 E G H H1 H2 HA HC L Q R RC V W X Y YC S1
Ot 3733 90H7 375 24 96 340 170 250 450 496 48 465 236 255 722.5 118 467.5 24 -29 168 148 12.5Ot 3633 70H7 375 24 96 310 155 225 350 391.5 39.5 413 215 222 587 120 365 18 0 153 98 10Ot 3533 60H7 262 16 54 244 122 212 310 340 30 346 139.5 132 405 73 273 15.5 37 112.5 67 -Ot 3433 50H7 225 16 54 226 113 180 250 280 27 306 128.5 114 350 59 236 13.5 30 103.5 60 -Ot 3333 40H7 184 16 54 173 86.5 140 200 230 21.5 245 110 90 305 65 215 21.5 7 85 50 -Ot 3233 35H7 154 10 33 151 75.5 112 130 151 18.5 205 90 77 255 58 178 13 16 72.5 35 -Ot 3232 35H7 184 10 33 151 75.5 112 130 151 21 267 91.5 93 290 77 197 13 63 72.5 85 -Ot 3132 30H7 154 10 33 130 65 80 130 151 15 203.5 77.5 80 245 69 165 11 46.5 60 66 -
Torque arm R option
D6.57
Electromechanical productsOrthobloc
SD shrink disc option
Dimensions
ADVANTAGE OF THE SHRINK DISCSpecially designed for assembling hollow shafts, it attaches the transmission device securely to the shaft.The torque (M), radial (FR) and axial (Fa) forces are transmitted integrally without play.There is no need to use a key, and the absence of the keyway avoids incipient cracks.Alternating movements are possible within the limits of the torque (M) indicated in the table.The absence of initial play is retained throughout the life of the gearbox.
TypeShrink disc torque
MNm
ShaftØ1
Tightening torquefor shrink disc bolts
Nm
Dimensionssee
pagesOt 2803 21800 98 100 D6.52Ot 3733 13000 95 59 D6.50Ot 3633 7500 75 30 D6.48Ot 3533 6000 62 30 D6.46Ot 3433 2400 52 12 D6.44Ot 3333 1380 42 12 D6.42
Ot3232-33 860 36 12 D6.40 - D6.38Ot 3132 570 30 12 D6.36
The tightening torque is maintained for operating temperatures from -50°C to +250°C.Surface roughness toleranceThe maximum permissible surface roughness is: Rz max = 15 µm.The maximum permissible tolerance on the shrink disc working reach diameter = h8.Secure positioningWhile the screws are tightened, the hub does not move axially in relation to the shaft.Characteristics of the shrink discVery high transmissible torque (shrink disc M according to table below).
No axial movement between shaft/hub (shrink disc Fa).Takes little time to assemble.Quick to dismantle.The assembly and dismantling precautions are described in the corresponding manual.
Ø1
DEFINITIONAfter the operating position, the following elements must be specified:- the mounting form and position: these are defined on page 4. The gearbox is viewed from side F with the motor behind, operation B3 or B5.
F
- the side for fixing the SD shrink disc on the hollow shaft: SD R: shrink disc mounted on the right, SD L: shrink disc mounted on the left.
The two tables below give the mounting options and the positioning of the shrink disc and cover according to the possible mounting forms.
With a flanged gearbox, the shrink disc and its cover are always opposite the flange.
CLIENT SHAFT FOR SHRINK DISCType A mini B maxi C maxi r maxi Ø 1h6 Ø 2 Ø 3h6 Ø 4
Ot 2803 50 25 495 - 98 97.5 100 120Ot 3733 46 24.5 422 0.8 95 94 95 104Ot 3633 37 24.5 365 0.8 75 74 75 89Ot 3533 50 11.5 294 0.8 62 61 63 90Ot 3433 45 9.5 277 0.5 52 51 53 65Ot 3333 37 9.5 213 0.5 42 41 44 55
Ot3232-33 25 7.5 176 0.8 36 35 37 50Ot 3132 25 34.5 157 - 30 29 30 45
These values are given as a guide only.
Br
Ø1
Ø3
Ø4
AC
30°
Ø2
30°
SD R shrink disc and cover on right, client shaft on left: l = feasibilityFoot mounting form Flange mounting form
Type NS SD R S SD R SBT LR SD R BS L SD R BD L SD ROt 2803 NA l l NA NAOt36-37 NA l l l -Ot33-35 - l l l l
Ot31-32 NA l l l l
NA: not available
SD L shrink disc and cover on left, client shaft on right: l = feasibilityFoot mounting form Flange mounting form
Type NS SD L S SD L SBT LR SD L BS R SD L BD R SD LOt 2803 NA l l NA NAOt36-37 NA l l l -Ot33-35 - l l l l
Ot31-32 NA l l l l
NA: not available
Dimensions in millimetres
D6.58
Electromechanical productsOrthobloc
- TF faceplate form, L* output shaft on left - TF faceplate form, H hollow shaft - Position B7
4xMxX4xMxX
Form TF1, Ot output shaft L* hollow HType MxX XA XB XE XF
Ot 2803 M30x50 515 275 105 220Ot 3733 M24x40 345 224 85 170Ot 3633 M20x35 295 200 78 154Ot 3533 M16x27 280 196 59.5 125Ot 3433 M12x22 238 164 62.5 100Ot 3333 M12x22 184 127 41.5 90Ot 3233 M10x22 155 102 38.5 72Ot 3232 M10x22 155 102 38.5 72Ot 3132 9 100 50 15 100
1. Operation only in position B7 * R shaft on right option
Feet added onType AA AB AC AD B BB BC E H HA HC K Q R U V W X
Ot 3533 103 330 140 140 230 280 60 293 200 40 412 24 165 438 67 273 73 37Ot 3433 81 271 115 115 195 241 46 257 160 30 340 18 135.5 371.5 60 236 59 30Ot 3333 61 211 85 85 155 200 39 213 125 20 265 14 106 321 50 215 65 7
DimensionsTF form option
(operation only in position B71)
NS form option (feet kit added)
Dimensions in millimetres
Dimensions in millimetres