1
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY
CABLE TRAY
ALUMINIUM CABLE LADDER
CABLE TRUNKING
PR
OD
UC
T C
ATA
LO
GU
EEle
ctr
ical
Cable
Conta
inm
ent
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
Who we are
© Mechanical Support Systems. Mechanical Support Systems reserves the right to change designs and specifications without notice.MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
General and Bespoke FabricationOur main focus is on light to medium steel fabrication, with an emphasis on small production runs and one-off high end bespoke works. Our scope and skill set is broad due to a wide range of the latest technology available in-house including the latest in automated plant and equipment. We regularly update our capital equipment to ensure jobs are executed to the highest standard, on time and within budget. Our highly trained team of Designers, Fabricators and Welders pride themselves on delivering precision design and engineering in Aluminium, Steel and Stainless Steel.
Founded in 2005 by Directors Hayden Froggatt and John Almond, MSS Ltd is an innovative and forward thinking company, supplying and installing cable containment systems to the electrical and mechanical sectors. Experience, sound product knowledge and practised efficiency means MSS can provide you with the best and most cost effective solution for your needs.MSS is accredited under the ISO 9001 for quality management systems and ISO 18001 for safety management systems.
What we doCable Ladder/Cable Tray/Cable Basket/Metal Framing Systems/Solid Trunking and Skirting Duct Systems/Pipe Supports/Seismic Design and Supply/Installation/Bespoke Fabrication
Why MSSWe are specialists in: Cable & Pipe Support SystemMechanical & Electrical InstallationsDesign/Engineering/Supply/InstallationSpecialised Mechanical InstallationsSkirting & Power Duct Interior FitoutsSpecial Fabrication and Engineering
We can design, engineer, manufacture and install to your specifications providing you with quality products, on time and within budget.
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
NEMA Aluminium Cable Ladder 12-13
Splice Plate 14
Bolts and Nuts 14
Internal Hold Down Washer 15
External Hold Down Bracket 15
Adjustable Vertical Elbow 16
Adjustable Horizontal Hinge 16
90° Horizontal Bend 17
45° Horizontal Bend 17
90° Internal Vertical Riser 18
90° External Vertical Dropper 18
Horizontal Equal Tee Section 19
Horizontal Equal Cross Section 19
Concentric Reducer 20
Left/Right Hand Reducer 20
Reducer Joiners 21
Aluminium Lid Covers 22
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems. Mechanical Support Systems reserves the right to change designs and specifications without notice.
INDEX
Cable Tray:
Page
Cable Tray 2
Splice Plate 3
Bolts and Nuts 4
Hold Down Washer 4
Hold Down Bracket 5
Link Plate 6
Radius Plate Pressing 7
Tee Bracket 8
Divider Strip 9
Hanger Bracket 10
Cable Trunking:
Page
Trunking Body & Lid 25
Cable Trunking Joiners 26
Horizontal Bend - Lid On Top 27
Vertical Bend - Lid on Outside 28
Vertical Bend - Lid on Inside 29
Horizontal Bend - Lid On Inside 29
Horizontal T-Section - Lid On Top 30
Horizontal T-Section - Lid On Outside 31
Horizontal Bend - Lid On Outside 31
Horizontal T-Section - Lid On Inside 32
4-Way Cross Section 33
Flange Adaptor 34
Twist Adaptor 35
End Cap 36
Aluminium Cable Ladder:
Page
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected] MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
Machines and Scope
CUTTING: Guillotine, band saw, gas cutting, punch and shear• Plate cutting up to 6mm steel• Batch cutting • Hole punching• Forming and bending: Press brake, pan folder, bulldozer bender• 0.5mm thick to 6mm steel• Adjustable jig for flat bar bending
WELDING: Tig, Mig or Arc• Pulsed Mig and Tig welderCOIL PRODUCTION: Power press, de-coiling unit • Punch, press and cut• Medium to large production runsFINISHING: • Powder Coating, Galvanising, Zinc
Plating, Anodising, and Polishing
Metal Fabrication
PRODUCTION
FORMING WELDING FINISHINGCUTTING
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice. 1
CABLE TRAY
CABLE TRAY
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected] 2 2
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
Standard Length: 3.0mStandard Finish: Pre-GalvanisedCable Laying Depth: 45mm
Width “W” (mm): Part Number:176 EMT3/150 PG326 EMT3/300 PG476 EMT3/450 PG626 EMT3/600 PG
Standard Length: 3.0mStandard Finish: Pre-GalvanisedCable Laying Depth: 79mm
Width “W” (mm): Part Number:176 EMT5/150 PG326 EMT5/300 PG476 EMT5/450 PG626 EMT5/600 PG
EMT3 Cable Tray
EMT5 Cable Tray
CABLE TRAY
0
50
100
150
200
250
300
1 1.5 2 2.5 3
EMT3 Allowable Loading (1.5 FOS)
Span (m)
Load
(kg/
m)
0
100
200
300
400
500
600
1 1.5 2 2.5 3
EMT5 Allowable Loading (1.5 FOS)
Span (m)
Load
(kg/
m)
© Mechanical Support Systems. Mechanical Support Systems reserves the right to change designs and specifications without notice. 33
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
CABLE TRAY - ACCESSORIES
EMT5/SP Splice Plate
EMT3/SP Splice Plate
EMT3/SP Splice Plate
EMT5/SP Splice Plate
Application Example:
Application Example:
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected] 4 4
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CABLE TRAY - ACCESSORIES
EMT/HDW Hold Down Washer
EMT/HDW Hold Down WasherSuitable for EMT3 and EMT5 Series Cable Tray
Application Example:
Hold Down Washers can be used on EMT3 and EMT5 Series Cable Tray
EMT/TB Bolt & EMT/TN Nut
EMT/TB BoltAvailable in ZP or HDG
EMT/TN NutAvailable in ZP or HDG
© Mechanical Support Systems. Mechanical Support Systems reserves the right to change designs and specifications without notice. 55© Mechanical Support Systems reserves the right to change designs and specifications without notice.
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
CABLE TRAY - ACCESSORIES
EMT5/EXT/HDB Hold Down Bracket
EMT3/EXT/HDB Hold Down Bracket
Application Example:
Hold Down Bracket can be fastened to channel, walls, floors, ceilings etc
EMT3/EXT/HDB Hold Down Bracket
EMT5/EXT/HDB Hold Down Bracket
Application Example:
Hold Down Bracket can be fastened to channel, walls, floors, ceilings etc
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected] 6 6
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CABLE TRAY - ACCESSORIES
EMT5/LP Link Plate
EMT3/LP Link Plate
Application Example:
Link Plate (Internal Riser)
Link Plate (External Riser)
1. Cut both tray sides down to the bottom face.
2. Bend the tray along the bottom face and secure on the inside with Link Plates and fasteners.
(2 cuts in each side result in a 90° riser)
1. Cut both tray sides up to the top face.
2. Bend the tray along the top face and secure on the inside with Link Plates and fasteners.
(2 cuts in each side result in a 90° riser)
Application Example:
Link Plate (Internal Riser)
Link Plate (External Riser)
1. Cut both tray sides down to the bottom face.
2. Bend the tray along the bottom face and secure on the inside with Link Plates and fasteners.
(3 cuts in each side result in a 90° riser)
1. Cut both tray sides up to the top face.2. Bend the tray along the top face and se-
cure on the inside with Link Plates and fasteners.
(3 cuts in each side result in a 90° riser)
EMT3/LP Link Plate
EMT5/LP Link Plate
© Mechanical Support Systems. Mechanical Support Systems reserves the right to change designs and specifications without notice. 77
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
CABLE TRAY - ACCESSORIES
EMT3/RPP Radius Plate Pressing
EMT5/RPP Radius Plate Pressing
EMT3/RPP Radius Plate Pressing
Application Example:
Radius Plate Pressing
Cut sides at top and bottom flanges only
Form Radius Plate Pressing to suit. Cut to length before fixing with fasteners.
Cut outside walls of tray right through(3 cuts in each side result in a 90° bend)
EMT5/RPP Radius Plate Pressing
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected] 8 8
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CABLE TRAY - ACCESSORIES
EMT5/TEE Tee Bracket
EMT3/TEE Tee Bracket
Application Example 1:3-Way Tee
Application Example 1:3-Way Tee
EMT3/TEE Tee Bracket
EMT5/TEE Tee Bracket
Application Example 2:4-Way Cross
Application Example 2:4-Way Cross
© Mechanical Support Systems. Mechanical Support Systems reserves the right to change designs and specifications without notice. 99
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
CABLE TRAY - ACCESSORIES
EMT5/DIVIDER Divider Strip
EMT3/DIVIDER Divider Strip
Application Example:
EMT5/DIVIDER Divider Strip
Application Example:
EMT3/DIVIDER Divider Strip
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected] 1010
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
Application Example:
KBSI/THB Single Hanger Bracket
KBSI/THB Hanger Bracket shown clamped to Cable Tray using Hold Down Washer, suspended using Threaded Rod.The vertical section of the Hanger Bracket can be mounted to either side of the Cable Tray.
(Hold Down Washer and Threaded Rod not included)
CABLE TRAY - ACCESSORIES
Standard Finish: Pre-Galvanised
Width “A”: Width “B”: Height “C”: Part Number: Suits Cable Tray Width:
147 182 170 KBSI/THB/150 PG 75, 100 & 150mm
172 232 170 KBSI/THB/200 PG 200mm
222 332 170 KBSI/THB/300 PG 300mm
KBSI/THB PG Single Hanger Bracket
CABLE LADDER ACCESSORIES
11
Cable Ladder
CABLE LADDER
CABLE LADDER
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
12
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
0
60
120
180
240
300
0 30 60 90 120 150 180
Chart 5
0
50
100
150
200
250
300
2.0 3.0 4.0 5.0 6.0
Load
(kg/
m)
Span (m)
NEMA Aluminium Cable Ladder
EM/N12B:EM/N12A: EM/N16A:
All load testing performed on 600mm ladder width and complies to all NEMA VE1 standards.
0
80
160
240
320
400
0 20 40 60 80
EM/N12B Cable Ladder Deflection**
Deflection (mm)
Load
(kg/
m)
2m S
pan
3m Span
4m Span5m Span
**Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation fac-tors (such as location of connectors and support etc).
6m Span
EM/N12A Cable Ladder Deflection**
Deflection (mm)
Load
(kg/
m)
2m S
pan
3m Span
4m Span5m Span
**Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation fac-tors (such as location of connectors and support etc).
6m Span
0
100
200
300
400
500
2.0 3.0 4.0 5.0 6.0
EM/N12B Cable Ladder Allowable Loading* (1.5 FOS)
Span (m)
Load
(kg/
m)
*Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m.
EM/N12A Cable Ladder Allowable Loading* (1.5 FOS)
Span (m)
Load
(kg/
m)
*Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m.
0
100
200
300
400
500
2.0 3.0 4.0 5.0 6.0
EM/N16A Cable Ladder Allowable Loading* (1.5 FOS)
Span (m)
Load
(kg/
m)
*Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m.
0
100
200
300
400
500
0 20 40 60 80 100
EM/N16A Cable Ladder Deflection**
Deflection (mm)
Load
(kg/
m)
2m S
pan
3m Span
4m Span
5m Span
**Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation fac-tors (such as location of connectors and support etc).
6m Span
Cable Laying Depth: 86.5mmBasic Load Capacity: 190kg/m @ 3m spanStandard Length: 6.0mRung Spacing: 300mm Nom.Material: Aluminium
Width “W” (mm): Part Number:150 EM/N12B/150 AL300 EM/N12B/300 AL450 EM/N12B/450 AL600 EM/N12B/600 AL750 EM/N12B/750 AL900 EM/N12B/900 AL
Cable Laying Depth: 58mmBasic Load Capacity: 112kg/m @ 3m spanStandard Length: 6.0mRung Spacing: 300mm Nom.Material: Aluminium
Width “W” (mm): Part Number:150 EM/N12A/150 AL300 EM/N12A/300 AL450 EM/N12A/450 AL600 EM/N12A/600 AL750 EM/N12A/750 AL900 EM/N12A/900 AL
Cable Laying Depth: 77mmBasic Load Capacity: 244kg/m @ 3m spanStandard Length: 6.0mRung Spacing: 300mm Nom.Material: Aluminium
Width “W” (mm): Part Number:150 EM/N16A/150 AL300 EM/N16A/300 AL450 EM/N16A/450 AL600 EM/N16A/600 AL750 EM/N16A/750 AL900 EM/N16A/900 AL
CABLE LADDER
EM/N12A: EM/N12B: EM/N16A:
13© Mechanical Support Systems reserves the right to change designs and specifications without notice.
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
0
150
300
450
600
750
900
0 10 20 30 40 50
Chart 5
EM/N20A:
**Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation fac-tors (such as location of connectors and support etc).
EM/N20A Cable Ladder Deflection**
Deflection (mm)
Load
(kg/
m)
2m S
pan
3m Span
4m Span
5m Span 6m Span
EM/N20A Cable Ladder Allowable Loading* (1.5 FOS)
Span (m)
Load
(kg/
m)
*Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m.
Cable Laying Depth: 97mmBasic Load Capacity: 458kg/m @ 3m spanStandard Length: 6.0mRung Spacing: 300mm Nom.Material: Aluminium
Width “W” (mm): Part Number:150 EM/N20A/150 AL300 EM/N20A/300 AL450 EM/N20A/450 AL600 EM/N20A/600 AL750 EM/N20A/750 AL900 EM/N20A/900 AL
All load testing performed on 600mm ladder width and complies to all NEMA VE1 standards.
0
150
300
450
600
750
900
2.0 3.0 4.0 5.0 6.0
EM/N20A Cable Mesh Allowable Loading (1.5 FOS)
Load
(kg/
m)
Span (m)
NEMA Aluminium Cable Ladder
CABLE LADDER
14
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CABLE LADDER ACCESSORIES
Application Example:
To Suit Ladder Type: Part Number:12A EM/N12A/SP AL12B EM/N12B/SP AL16A EM/N16A/SP AL20A EM/N20A/SP AL
EMT/TB Bolt & EMT/TN Nut
EMT/TB BoltAvailable in ZP or HDG
EMT/TN NutAvailable in ZP or HDG
Splice Plate - 12A, 12B, 16A, 20A
15© Mechanical Support Systems reserves the right to change designs and specifications without notice.
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
CABLE LADDER ACCESSORIES
External Hold Down Bracket
Application Example:
To Suit Ladder Type: Part Number:12A EM/N12A/HDB AL12B EM/N12B/HDB AL16A EM/N16A/HDB AL20A EM/N20A/HDB AL
Application Example:
EM/NHDW ALInternal Hold Down Washer
(Generic for all ladder)
Internal Hold Down Washer
16
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CABLE LADDER ACCESSORIES
Adjustable Horizontal Hinge
Adjustable Vertical Elbow
To Suit Ladder Type: Part Number:12A EM/N12A/AVE AL12B EM/N12B/AVE AL16A EM/N16A/AVE AL20A EM/N20A/AVE AL
To Suit Ladder Type: Part Number:12A EM/N12A/AHE AL12B EM/N12B/AHE AL16A EM/N16A/AHE AL20A EM/N20A/AHE AL
1 set per transition
2 sets per transition
17© Mechanical Support Systems reserves the right to change designs and specifications without notice.
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
CABLE LADDER ACCESSORIES
45° Horizontal Bend
90° Horizontal Bend
CableLadder:
InsideRadius:
Width: Part Number:
12A 300 150 EM/N12A/HB90/150 AL
300 EM/N12A/HB90/300 AL
450 EM/N12A/HB90/450 AL
600 EM/N12A/HB90/600 AL
750 EM/N12A/HB90/750 AL
900 EM/N12A/HB90/900 AL
12B 300 150 EM/N12B/HB90/150 AL
300 EM/N12B/HB90/300 AL
450 EM/N12B/HB90/450 AL
600 EM/N12B/HB90/600 AL
750 EM/N12B/HB90/750 AL
900 EM/N12B/HB90/900 AL
16A 300 150 EM/N16A/HB90/150 AL
300 EM/N16A/HB90/300 AL
450 EM/N16A/HB90/450 AL
600 EM/N16A/HB90/600 AL
750 EM/N16A/HB90/750 AL
900 EM/N16A/HB90/900 AL
20A 450 150 EM/N20A/HB90/150 AL
300 EM/N20A/HB90/300 AL
450 EM/N20A/HB90/450 AL
600 EM/N20A/HB90/600 AL
750 EM/N20A/HB90/750 AL
900 EM/N20A/HB90/900 AL
CableLadder:
InsideRadius:
Width: Part Number:
12A 300 150 EM/N12A/HB45/150 AL
300 EM/N12A/HB45/300 AL
450 EM/N12A/HB45/450 AL
600 EM/N12A/HB45/600 AL
750 EM/N12A/HB45/750 AL
900 EM/N12A/HB45/900 AL
12B 300 150 EM/N12B/HB45/150 AL
300 EM/N12B/HB45/300 AL
450 EM/N12B/HB45/450 AL
600 EM/N12B/HB45/600 AL
750 EM/N12B/HB45/750 AL
900 EM/N12B/HB45/900 AL
16A 300 150 EM/N16A/HB45/150 AL
300 EM/N16A/HB45/300 AL
450 EM/N16A/HB45/450 AL
600 EM/N16A/HB45/600 AL
750 EM/N16A/HB45/750 AL
900 EM/N16A/HB45/900 AL
20A 450 150 EM/N20A/HB45/150 AL
300 EM/N20A/HB45/300 AL
450 EM/N20A/HB45/450 AL
600 EM/N20A/HB45/600 AL
750 EM/N20A/HB45/750 AL
900 EM/N20A/HB45/900 AL
Custom radii and widths are available on request
Custom radii and widths are available on request
18
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
90° External Vertical Riser
90° Internal Vertical Riser
CableLadder:
InsideRadius:
Width: Part Number:
12A 300 150 EM/N12A/INT/RISER/150 AL
300 EM/N12A/INT/RISER/300 AL
450 EM/N12A/INT/RISER/450 AL
600 EM/N12A/INT/RISER/600 AL
750 EM/N12A/INT/RISER/750 AL
900 EM/N12A/INT/RISER/900 AL
12B 300 150 EM/N12B/INT/RISER/150 AL
300 EM/N12B/INT/RISER/300 AL
450 EM/N12B/INT/RISER/450 AL
600 EM/N12B/INT/RISER/600 AL
750 EM/N12B/INT/RISER/750 AL
900 EM/N12B/INT/RISER/900 AL
16A 300 150 EM/N16A/INT/RISER/150 AL
300 EM/N16A/INT/RISER/300 AL
450 EM/N16A/INT/RISER/450 AL
600 EM/N16A/INT/RISER/600 AL
750 EM/N16A/INT/RISER/750 AL
900 EM/N16A/INT/RISER/900 AL
20A 450 150 EM/N20A/INT/RISER/150 AL
300 EM/N20A/INT/RISER/300 AL
450 EM/N20A/INT/RISER/450 AL
600 EM/N20A/INT/RISER/600 AL
750 EM/N20A/INT/RISER/750 AL
900 EM/N20A/INT/RISER/900 AL
CableLadder:
InsideRadius:
Width: Part Number:
12A 300 150 EM/N12A/EXT/RISER/150 AL
300 EM/N12A/EXT/RISER/300 AL
450 EM/N12A/EXT/RISER/450 AL
600 EM/N12A/EXT/RISER/600 AL
750 EM/N12A/EXT/RISER/750 AL
900 EM/N12A/EXT/RISER/900 AL
12B 300 150 EM/N12B/EXT/RISER/150 AL
300 EM/N12B/EXT/RISER/300 AL
450 EM/N12B/EXT/RISER/450 AL
600 EM/N12B/EXT/RISER/600 AL
750 EM/N12B/EXT/RISER/750 AL
900 EM/N12B/EXT/RISER/900 AL
16A 300 150 EM/N16A/EXT/RISER/150 AL
300 EM/N16A/EXT/RISER/300 AL
450 EM/N16A/EXT/RISER/450 AL
600 EM/N16A/EXT/RISER/600 AL
750 EM/N16A/EXT/RISER/750 AL
900 EM/N16A/EXT/RISER/900 AL
20A 450 150 EM/N20A/EXT/RISER/150 AL
300 EM/N20A/EXT/RISER/300 AL
450 EM/N20A/EXT/RISER/450 AL
600 EM/N20A/EXT/RISER/600 AL
750 EM/N20A/EXT/RISER/750 AL
900 EM/N20A/EXT/RISER/900 AL
Custom radii and widths are available on request
Custom radii and widths are available on request
CABLE LADDER ACCESSORIES
19
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
4 Way Cross
Horizontal Equal Tee Section
CableLadder:
InsideRadius:
Width: Part Number:
12A 300 150 EM/N12A/EQTEE/150 AL
300 EM/N12A/EQTEE/300 AL
450 EM/N12A/EQTEE/450 AL
600 EM/N12A/EQTEE/600 AL
750 EM/N12A/EQTEE/750 AL
900 EM/N12A/EQTEE/900 AL
12B 300 150 EM/N12B/EQTEE/150 AL
300 EM/N12B/EQTEE/300 AL
450 EM/N12B/EQTEE/450 AL
600 EM/N12B/EQTEE/600 AL
750 EM/N12B/EQTEE/750 AL
900 EM/N12B/EQTEE/900 AL
16A 300 150 EM/N16A/EQTEE/150 AL
300 EM/N16A/EQTEE/300 AL
450 EM/N16A/EQTEE/450 AL
600 EM/N16A/EQTEE/600 AL
750 EM/N16A/EQTEE/750 AL
900 EM/N16A/EQTEE/900 AL
20A 450 150 EM/N20A/EQTEE/150 AL
300 EM/N20A/EQTEE/300 AL
450 EM/N20A/EQTEE/450 AL
600 EM/N20A/EQTEE/600 AL
750 EM/N20A/EQTEE/750 AL
900 EM/N20A/EQTEE/900 AL
CableLadder:
InsideRadius:
Width: Part Number:
12A 300 150 EM/N12A/CROSS/150 AL
300 EM/N12A/CROSS/300 AL
450 EM/N12A/CROSS/450 AL
600 EM/N12A/CROSS/600 AL
750 EM/N12A/CROSS/750 AL
900 EM/N12A/CROSS/900 AL
12B 300 150 EM/N12B/CROSS/150 AL
300 EM/N12B/CROSS/300 AL
450 EM/N12B/CROSS/450 AL
600 EM/N12B/CROSS/600 AL
750 EM/N12B/CROSS/750 AL
900 EM/N12B/CROSS/900 AL
16A 300 150 EM/N16A/CROSS/150 AL
300 EM/N16A/CROSS/300 AL
450 EM/N16A/CROSS/450 AL
600 EM/N16A/CROSS/600 AL
750 EM/N16A/CROSS/750 AL
900 EM/N16A/CROSS/900 AL
20A 450 150 EM/N20A/CROSS/150 AL
300 EM/N20A/CROSS/300 AL
450 EM/N20A/CROSS/450 AL
600 EM/N20A/CROSS/600 AL
750 EM/N20A/CROSS/750 AL
900 EM/N20A/CROSS/900 AL
Custom radii and widths are available on request
Custom radii and widths are available on request
CABLE LADDER ACCESSORIES
20
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
Concentric/Centred Reducer
From To Bracket 1 Bracket 2
300
150
75 75
450 150 150
600 225 225
750 300 300
900 375 375
450
300
75 75
600 150 150
750 225 225
900 300 300
600
450
75 75
750 150 150
900 225 255
750600
75 75
900 150 150
900 750 75 75
Left/Right hand Reducer
CABLE LADDER REDUCERS – NEMA 12A, 12B, 16A, 20A
Reducer to suit all ladder typesConcentric/Centred Reducer
Flanged Nut + Bol t
Reducer Bracket
Reducer Bracket
Reducer Bracket
Left/Right hand Reducer
From To Bracket 1 Bracket 2
300
150
150
450 300
600 450
750 600
900 750
450
300
150
600 300
750 450
900 600
600
450
150
750 300
900 450
750600
150
900 300
900 750 150
Spl
ice
plat
e
F langed Nut + Bol t
Spl ice Plate
Reducer Bracket
21© Mechanical Support Systems reserves the right to change designs and specifications without notice.
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
CABLE LADDER REDUCER JOINERS
Reducer Bracket - 12A, 12B, 16A, 20A
Flanged Nut & Bolt
EMT/TB BoltAvailable in ZP or HDG
EMT/TN NutAvailable in ZP or HDG
Application Example:
To Suit Ladder Type: Part Number:12A EM/N12A/SP AL12B EM/N12B/SP AL16A EM/N16A/SP AL20A EM/N20A/SP AL
Splice Plate - 12A, 12B, 16A, 20A
22
CABLE LADDER ACCESSORIES
Aluminium Lid Covers
Standard Cover
Standard Length: 3.0mMaterial: Aluminium
Vented Cover
Standard Length: 3.0mMaterial: Aluminium
Peaked Cover
Standard Length: 3.0mMaterial: Aluminium
Custom covers to suit any application are available on request.
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CABLE TRUNKING
23
CABLE TRUNKING
CABLE TRUNKING
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
24
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CABLE TRUNKING
Trunking Schematic
Edition Sheet1 / 1 Cable GA
Mechanical Support SystemsDesigned by: B Mumme 28/03/2017
-
Sheet size: A4Cadfile: Cable GA.idwV25
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
JoinerEM/STR/SJ (H)
4 Way Cross SectionEM/STR/CROSS (W)x(H)
Vertical Bend - Lid InsideEM/STR/INT/RISER (W)x(H)
Horizontal T-Section - Lid on TopEM/STR/EQ/TEE (W)x(H)
Vertical Bend - Lid OutsideEM/STR/EXT/RISER (W)x(H)
Twist AdaptorEM/STR/TA (W)x(H)
Horizontal T-Section - Lid on OutsideEM/STR/EXT/TEE (W)x(H)
Flange AdaptorEM/STR/FA (W)x(H)
Horizontal Bend - Lid on TopEM/STR/HB (W)x(H)
Horizontal T-Section - Lid on InsideEM/STR/INT/TEE (W)x(H)
Trunking Body & LidEM/STR (W)x(H)
End CapEM/STR/EC (W)x(H)
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
25© Mechanical Support Systems reserves the right to change designs and specifications without notice.
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
CABLE TRUNKING
Trunking Body and Lid
Edition Sheet1 / 1
Trunking Body & LidEM/STRMechanical Support Systems
Designed by: B Mumme 28/03/2017
C
Sheet size: A4Cadfile: STR.idwV13
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Hei
ght
150 1350 1350 150Width
3000
11 Drain hole
Width(mm)
Height(mm)
Length(mm) Part Number
50 50 3000 EM/STR 50x50 PG75 75 3000 EM/STR 75x75 PG
100 50 3000 EM/STR 100x50 PG100 75 3000 EM/STR 100x75 PG100 100 3000 EM/STR 100x100 PG150 100 3000 EM/STR 150x100 PG
KBVFast lock clips
Note: Special profiles can be made to order upon request. Straigth Trunking is supplied with the following components: 1 x Straight Trunking body1 x Straight Trunking lid6 x KBV Fast lock clips Optional extrasEM/STR/SJ (H) JoinerEM/STR/EC (W)x(H) End Cap
Edition Sheet1 / 1
Trunking Body & LidEM/STRMechanical Support Systems
Designed by: B Mumme 28/03/2017
C
Sheet size: A4Cadfile: STR.idwV13
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Hei
ght
150 1350 1350 150Width
3000
11 Drain hole
Width(mm)
Height(mm)
Length(mm) Part Number
50 50 3000 EM/STR 50x50 PG75 75 3000 EM/STR 75x75 PG
100 50 3000 EM/STR 100x50 PG100 75 3000 EM/STR 100x75 PG100 100 3000 EM/STR 100x100 PG150 100 3000 EM/STR 150x100 PG
KBVFast lock clips
Note: Special profiles can be made to order upon request. Straigth Trunking is supplied with the following components: 1 x Straight Trunking body1 x Straight Trunking lid6 x KBV Fast lock clips Optional extrasEM/STR/SJ (H) JoinerEM/STR/EC (W)x(H) End Cap
Width:(mm)
Height:(mm)
Length:(m)
Part Number:
50 50 3.0 EM/STR 50X50 PG
75 75 3.0 EM/STR 75X75 PG
100 50 3.0 EM/STR 100X50 PG
100 75 3.0 EM/STR 100X75 PG
100 100 3.0 EM/STR 100X100 PG
150 100 3.0 EM/STR 150X100 PG
NOTE: Special profiles can be made to order upon request
Straight Trunking is supplied with the following components:1 x Straight Trunking body 1 x Straight Trunking Lid6 x KBV Fast Lock Clips
Optional extras:EM/STR/SJ (H) Joiner EM/STR/EC (W)x(H) End Cap
KBV Fast Lock Clips
26
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CABLE TRUNKING
Joiner
KBV Fast Locking Clip
Standard Finish: Stainless Steel 316
Part Number:
KBSI/KBV
MGB0616ZPM6x16 Default Gutter screw
HMFN06ZPM6 Default Flanged Hex Nut
KBVFast lock clips
Edition Sheet1 / 1
Gutter screw MGB0616ZPMechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Fittings.idwV10
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Edition Sheet1 / 1
Joiner EM/STR/SJ (H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: SJ.idwV12
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Hei
ght
90
Height(mm) Part Number
50 EM/STR/SJ 50 PG75 EM/STR/SJ 75 PG100 EM/STR/SJ 100 PG150 EM/STR/SJ 150 PG
Joiner is supplied with the following components: 2 x Joiner plate4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Joiner EM/STR/SJ (H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: SJ.idwV12
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Hei
ght
90
Height(mm) Part Number
50 EM/STR/SJ 50 PG75 EM/STR/SJ 75 PG100 EM/STR/SJ 100 PG150 EM/STR/SJ 150 PG
Joiner is supplied with the following components: 2 x Joiner plate4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Joiner EM/STR/SJ (H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: SJ.idwV12
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Hei
ght
90
Height(mm) Part Number
50 EM/STR/SJ 50 PG75 EM/STR/SJ 75 PG100 EM/STR/SJ 100 PG150 EM/STR/SJ 150 PG
Joiner is supplied with the following components: 2 x Joiner plate4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Height:(mm)
Part Number:
50 EM/STR/SJ 50 PG
75 EM/STR/SJ 75 PG
100 EM/STR/SJ 100 PG
150 EM/STR/SJ 150 PG
MGB0616ZPM6x16 Default Gutter screw
HMFN06ZPM6 Default Flanged Hex Nut
KBVFast lock clips
Edition Sheet1 / 1
Gutter screw MGB0616ZPMechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Fittings.idwV10
Preliminary: For ApprovalC
opyr
ight
© M
echa
nica
l Sup
port
Syst
ems
28/0
3/20
17
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
MGB0616ZPM6x16 Default Gutter screw
HMFN06ZPM6 Default Flanged Hex Nut
KBVFast lock clips
Edition Sheet1 / 1
Gutter screw MGB0616ZPMechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Fittings.idwV10
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Gutter Bolt Flanged Hex Nut
KBV Fast Lock Clips
HNFM06ZPM6 Flanged Hex Nut
Joiner is supplied with the following components:2 x Joiner plate4 x GBM06 x 16ZP M6 Gutter Bolt4 x HNFM06ZP M6 Flange Nut
GBM06 x 16ZPM6x16 Gutter Bolt
27© Mechanical Support Systems reserves the right to change designs and specifications without notice.
Flanged Hex Nut
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
Horizontal Bend - Lid On Top
CABLE TRUNKING
Edition Sheet1 / 1
Horizontal Bend - Lid on Top EM/STR/HB (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: HB.idwV17
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width(mm)
Height(mm) Part Number
50 50 EM/STR/HB 50x50 PG75 75 EM/STR/HB 75x75 PG100 50 EM/STR/HB100x50 PG100 75 EM/STR/HB 100x75 PG100 100 EM/STR/HB 100x100 PG150 100 EM/STR/HB 150x100 PG
Width
Hei
ght
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
KBVFast lock clips
Horizontal Bend is supplied with the following components: 1 x Horizontal Bend body1 x Horizontal Bend lid3 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Horizontal Bend - Lid on Top EM/STR/HB (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: HB.idwV17
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width(mm)
Height(mm) Part Number
50 50 EM/STR/HB 50x50 PG75 75 EM/STR/HB 75x75 PG100 50 EM/STR/HB100x50 PG100 75 EM/STR/HB 100x75 PG100 100 EM/STR/HB 100x100 PG150 100 EM/STR/HB 150x100 PG
Width
Hei
ght
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
KBVFast lock clips
Horizontal Bend is supplied with the following components: 1 x Horizontal Bend body1 x Horizontal Bend lid3 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Horizontal Bend - Lid on Top EM/STR/HB (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: HB.idwV17
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width(mm)
Height(mm) Part Number
50 50 EM/STR/HB 50x50 PG75 75 EM/STR/HB 75x75 PG100 50 EM/STR/HB100x50 PG100 75 EM/STR/HB 100x75 PG100 100 EM/STR/HB 100x100 PG150 100 EM/STR/HB 150x100 PG
Width
Hei
ght
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
KBVFast lock clips
Horizontal Bend is supplied with the following components: 1 x Horizontal Bend body1 x Horizontal Bend lid3 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/HB 50X50 PG
75 75 EM/STR/HB 75X75 PG
100 50 EM/STR/HB 100X50 PG
100 75 EM/STR/HB 100X75 PG
100 100 EM/STR/HB 100X100 PG
150 100 EM/STR/HB 150X100 PG
Horizontal Bend is supplied with the following components:1 x Horizontal Bend Body1 x Horizontal Bend Lid3 x KBV Fast Lock Clips4 x GBM06 x 16ZP M6 Gutter Bolt4 x HNFM06ZP M6 Flange Nut
KBV Fast Lock Clips
GBM06 x 16ZPGutter Bolt
HNFM06ZPFlanged Hex Nut
28
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
Vertical Bend - Lid on Outside
CABLE TRUNKING
Edition Sheet1 / 1
Vertical Bend - Lid Outside EM/STR/EXT/RISER (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Ext Riser.idwV19
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EXT/RISER 50x50 PG75 75 EM/STR/EXT/RISER 75x75 PG100 50 EM/STR/EXT/RISER100x50 PG100 75 EM/STR/EXT/RISER 100x75 PG100 100 EM/STR/EXT/RISER 100x100 PG150 100 EM/STR/EXT/RISER 150x100 PG
Width
Hei
ght
KBVFast lock clips
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Vertical Bend is supplied with the following components: 1 x Vertical Bend body2 x Vertical Bend lid4 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Vertical Bend - Lid Outside EM/STR/EXT/RISER (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Ext Riser.idwV19
Preliminary: For ApprovalC
opyr
ight
© M
echa
nica
l Sup
port
Syst
ems
28/0
3/20
17
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EXT/RISER 50x50 PG75 75 EM/STR/EXT/RISER 75x75 PG100 50 EM/STR/EXT/RISER100x50 PG100 75 EM/STR/EXT/RISER 100x75 PG100 100 EM/STR/EXT/RISER 100x100 PG150 100 EM/STR/EXT/RISER 150x100 PG
Width
Hei
ght
KBVFast lock clips
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Vertical Bend is supplied with the following components: 1 x Vertical Bend body2 x Vertical Bend lid4 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Vertical Bend - Lid Outside EM/STR/EXT/RISER (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Ext Riser.idwV19
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EXT/RISER 50x50 PG75 75 EM/STR/EXT/RISER 75x75 PG100 50 EM/STR/EXT/RISER100x50 PG100 75 EM/STR/EXT/RISER 100x75 PG100 100 EM/STR/EXT/RISER 100x100 PG150 100 EM/STR/EXT/RISER 150x100 PG
Width
Hei
ght
KBVFast lock clips
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Vertical Bend is supplied with the following components: 1 x Vertical Bend body2 x Vertical Bend lid4 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Vertical Bend is supplied with the following components:1 x Vertical Bend Body2 x Vertical Bend Lid4 x KBV Fast Lock Clips4 x GBM06 x 16ZP M6 Gutter Bolt4 x HNFM06ZP M6 Flange Nut
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/EXT/RISER 50X50 PG
75 75 EM/STR/EXT/RISER 75X75 PG
100 50 EM/STR/EXT/RISER 100X50 PG
100 75 EM/STR/EXT/RISER 100X75 PG
100 100 EM/STR/EXT/RISER 100X100 PG
150 100 EM/STR/EXT/RISER 150X100 PG
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/INT/RISER 50X50 PG
75 75 EM/STR/INT/RISER 75X75 PG
100 50 EM/STR/INT/RISER 100X50 PG
100 75 EM/STR/INT/RISER 100X75 PG
100 100 EM/STR/INT/RISER 100X100 PG
150 100 EM/STR/INT/RISER 150X100 PG
GBM06 x 16ZPGutter Bolt
HNFM06ZPFlanged Hex Nut
KBV Fast Lock Clips
29
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
Vertical Bend is supplied with the following components:1 x Vertical Bend Body2 x Vertical Bend Lid4 x KBV Fast Lock Clips4 x GBM06 x 16ZP M6 Gutter Bolt4 x HNFM06ZP M6 Flange Nut
CABLE TRUNKING
Vertical Bend - Lid Inside
Edition Sheet1 / 1
Vertical Bend - Lid Inside EM/STR/INT/RISER (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Int Riser.idwV15
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Wid
th
Height
Width(mm)
Height(mm) Part Number
50 50 EM/STR/INT/RISER 50x50 PG75 75 EM/STR/INT/RISER 75x75 PG100 50 EM/STR/INT/RISER100x50 PG100 75 EM/STR/INT/RISER 100x75 PG100 100 EM/STR/INT/RISER 100x100 PG150 100 EM/STR/INT/RISER 150x100 PG
KBVFast lock clips
HMFN06ZPFlanged Hex Nut
MGB0616ZPGutter screwVertical Bend is supplied with the following components:
1 x Vertical Bend body1 x Vertical Bend lid4 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Vertical Bend - Lid Inside EM/STR/INT/RISER (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Int Riser.idwV15
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Wid
th
Height
Width(mm)
Height(mm) Part Number
50 50 EM/STR/INT/RISER 50x50 PG75 75 EM/STR/INT/RISER 75x75 PG100 50 EM/STR/INT/RISER100x50 PG100 75 EM/STR/INT/RISER 100x75 PG100 100 EM/STR/INT/RISER 100x100 PG150 100 EM/STR/INT/RISER 150x100 PG
KBVFast lock clips
HMFN06ZPFlanged Hex Nut
MGB0616ZPGutter screwVertical Bend is supplied with the following components:
1 x Vertical Bend body1 x Vertical Bend lid4 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Vertical Bend - Lid Inside EM/STR/INT/RISER (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Int Riser.idwV15
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Wid
th
Height
Width(mm)
Height(mm) Part Number
50 50 EM/STR/INT/RISER 50x50 PG75 75 EM/STR/INT/RISER 75x75 PG100 50 EM/STR/INT/RISER100x50 PG100 75 EM/STR/INT/RISER 100x75 PG100 100 EM/STR/INT/RISER 100x100 PG150 100 EM/STR/INT/RISER 150x100 PG
KBVFast lock clips
HMFN06ZPFlanged Hex Nut
MGB0616ZPGutter screwVertical Bend is supplied with the following components:
1 x Vertical Bend body1 x Vertical Bend lid4 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Vertical Bend is supplied with the following components:1 x Vertical Bend Body1 x Vertical Bend Lid4 x KBV Fast Lock Clips4 x GBM06 x 16ZP M6 Gutter Bolt4 x HNFM06ZP M6 Flange Nut
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/INT/RISER 50X50 PG
75 75 EM/STR/INT/RISER 75X75 PG
100 50 EM/STR/INT/RISER 100X50 PG
100 75 EM/STR/INT/RISER 100X75 PG
100 100 EM/STR/INT/RISER 100X100 PG
150 100 EM/STR/INT/RISER 150X100 PG
GBM06 x 16ZPGutter Bolt
KBV Fast Lock Clips
HNFM06ZPFlanged Hex Nut
30
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CABLE TRUNKING
Horizontal T-Section - Lid On Top
Edition Sheet1 / 1
Horizontal T-Section - Lid on Top EM/STR/EQ/TEE (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Eq Tee.idwV13
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EQ/TEE 50x50 PG75 75 EM/STR/EQ/TEE 75x75 PG100 50 EM/STR/EQ/TEE100x50 PG100 75 EM/STR/EQ/TEE 100x75 PG100 100 EM/STR/EQ/TEE 100x100 PG150 100 EM/STR/EQ/TEE 150x100 PG
KBVFast lock clips
MGB0616ZPGutter screw
MGB0616ZPGutter screw
Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section body1 x Horizontal T-Section lid3 x KBV Fast lock clips6 x MGB0616ZP M6 Gutter bolt6 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Horizontal T-Section - Lid on Top EM/STR/EQ/TEE (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Eq Tee.idwV13
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EQ/TEE 50x50 PG75 75 EM/STR/EQ/TEE 75x75 PG100 50 EM/STR/EQ/TEE100x50 PG100 75 EM/STR/EQ/TEE 100x75 PG100 100 EM/STR/EQ/TEE 100x100 PG150 100 EM/STR/EQ/TEE 150x100 PG
KBVFast lock clips
MGB0616ZPGutter screw
MGB0616ZPGutter screw
Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section body1 x Horizontal T-Section lid3 x KBV Fast lock clips6 x MGB0616ZP M6 Gutter bolt6 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Horizontal T-Section - Lid on Top EM/STR/EQ/TEE (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Eq Tee.idwV13
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EQ/TEE 50x50 PG75 75 EM/STR/EQ/TEE 75x75 PG100 50 EM/STR/EQ/TEE100x50 PG100 75 EM/STR/EQ/TEE 100x75 PG100 100 EM/STR/EQ/TEE 100x100 PG150 100 EM/STR/EQ/TEE 150x100 PG
KBVFast lock clips
MGB0616ZPGutter screw
MGB0616ZPGutter screw
Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section body1 x Horizontal T-Section lid3 x KBV Fast lock clips6 x MGB0616ZP M6 Gutter bolt6 x HMFN06ZP M6 Flange nut
Horizontal T-Section is supplied with the followingcomponents:1 x Horizontal T-Section Body1 x Horizontal T-Section Lid3 x KBV Fast Lock Clips6 x GBM06 x 16ZP M6 Gutter Bolt6 x HNFM06ZP M6 Flange Nut
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/EQ/TEE 50X50 PG
75 75 EM/STR/EQ/TEE 75X75 PG
100 50 EM/STR/EQ/TEE 100X50 PG
100 75 EM/STR/EQ/TEE 100X75 PG
100 100 EM/STR/EQ/TEE 100X100 PG
150 100 EM/STR/EQ/TEE 150X100 PG
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/EXT/TEE 50X50 PG
75 75 EM/STR/EXT/TEE 75X75 PG
100 50 EM/STR/EXT/TEE 100X50 PG
100 75 EM/STR/EXT/TEE 100X75 PG
100 100 EM/STR/EXT/TEE 100X100 PG
150 100 EM/STR/EXT/TEE 150X100 PG
GBM06 x 16ZPGutter Bolt
HNFM06ZPFlanged Hex Nut
KBV Fast Lock Clips
31© Mechanical Support Systems reserves the right to change designs and specifications without notice.
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
CABLE TRUNKING
Horizontal T-Section - Lid On Outside
Edition Sheet1 / 1
Horizontal T-Section - Lid on Outside EM/STR/EXT/TEE (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Ext Tee.idwV14
Preliminary: For ApprovalC
opyr
ight
© M
echa
nica
l Sup
port
Syst
ems
28/0
3/20
17
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EXT/TEE 50x50 PG75 75 EM/STR/EXT/TEE 75x75 PG100 50 EM/STR/EXT/TEE100x50 PG100 75 EM/STR/EXT/TEE 100x75 PG100 100 EM/STR/EXT/TEE 100x100 PG150 100 EM/STR/EXT/TEE 150x100 PG
Width
Hei
ght
KBVFast lock clips
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section body1 x Horizontal T-Section lid2 x KBV Fast lock clips6 x MGB0616ZP M6 Gutter bolt6 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Horizontal T-Section - Lid on Outside EM/STR/EXT/TEE (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Ext Tee.idwV14
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EXT/TEE 50x50 PG75 75 EM/STR/EXT/TEE 75x75 PG100 50 EM/STR/EXT/TEE100x50 PG100 75 EM/STR/EXT/TEE 100x75 PG100 100 EM/STR/EXT/TEE 100x100 PG150 100 EM/STR/EXT/TEE 150x100 PG
Width
Hei
ght
KBVFast lock clips
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section body1 x Horizontal T-Section lid2 x KBV Fast lock clips6 x MGB0616ZP M6 Gutter bolt6 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Horizontal T-Section - Lid on Outside EM/STR/EXT/TEE (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Ext Tee.idwV14
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EXT/TEE 50x50 PG75 75 EM/STR/EXT/TEE 75x75 PG100 50 EM/STR/EXT/TEE100x50 PG100 75 EM/STR/EXT/TEE 100x75 PG100 100 EM/STR/EXT/TEE 100x100 PG150 100 EM/STR/EXT/TEE 150x100 PG
Width
Hei
ght
KBVFast lock clips
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section body1 x Horizontal T-Section lid2 x KBV Fast lock clips6 x MGB0616ZP M6 Gutter bolt6 x HMFN06ZP M6 Flange nut
Horizontal T-Section is supplied with the followingcomponents:1 x Horizontal T-Section Body1 x Horizontal T-Section Lid2 x KBV Fast Lock Clips6 x GBM06 x 16ZP M6 Gutter Bolt6 x HNFM06ZP M6 Flange Nut
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/EXT/TEE 50X50 PG
75 75 EM/STR/EXT/TEE 75X75 PG
100 50 EM/STR/EXT/TEE 100X50 PG
100 75 EM/STR/EXT/TEE 100X75 PG
100 100 EM/STR/EXT/TEE 100X100 PG
150 100 EM/STR/EXT/TEE 150X100 PG
GBM06 x 16ZPGutter Bolt
HNFM06ZPFlanged Hex Nut
KBV Fast Lock Clips
32 MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
CABLE TRUNKING
Horizontal T-Section - Lid On Inside
Edition Sheet1 / 1
Horizontal T-Section - Lid on Inside EM/STR/INT/TEE (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Int Tee.idwV12
Preliminary: For ApprovalC
opyr
ight
© M
echa
nica
l Sup
port
Syst
ems
28/0
3/20
17
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/INT/TEE 50x50 PG75 75 EM/STR/INT/TEE 75x75 PG100 50 EM/STR/INT/TEE100x50 PG100 75 EM/STR/INT/TEE 100x75 PG100 100 EM/STR/INT/TEE 100x100 PG150 100 EM/STR/INT/TEE 150x100 PG
Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section body2 x Horizontal T-Section lid4 x KBV Fast lock clips6 x MGB0616ZP M6 Gutter bolt6 x HMFN06ZP M6 Flange nut
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
KBVFast lock clips
Edition Sheet1 / 1
Horizontal T-Section - Lid on Inside EM/STR/INT/TEE (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Int Tee.idwV12
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/INT/TEE 50x50 PG75 75 EM/STR/INT/TEE 75x75 PG100 50 EM/STR/INT/TEE100x50 PG100 75 EM/STR/INT/TEE 100x75 PG100 100 EM/STR/INT/TEE 100x100 PG150 100 EM/STR/INT/TEE 150x100 PG
Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section body2 x Horizontal T-Section lid4 x KBV Fast lock clips6 x MGB0616ZP M6 Gutter bolt6 x HMFN06ZP M6 Flange nut
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
KBVFast lock clips
Edition Sheet1 / 1
Horizontal T-Section - Lid on Inside EM/STR/INT/TEE (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Int Tee.idwV12
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/INT/TEE 50x50 PG75 75 EM/STR/INT/TEE 75x75 PG100 50 EM/STR/INT/TEE100x50 PG100 75 EM/STR/INT/TEE 100x75 PG100 100 EM/STR/INT/TEE 100x100 PG150 100 EM/STR/INT/TEE 150x100 PG
Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section body2 x Horizontal T-Section lid4 x KBV Fast lock clips6 x MGB0616ZP M6 Gutter bolt6 x HMFN06ZP M6 Flange nut
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
KBVFast lock clips
Horizontal T-Section is supplied with the followingcomponents:1 x Horizontal T-Section Body2 x Horizontal T-Section Lid4 x KBV Fast Lock Clips6 x GBM06 x 16ZP M6 Gutter Bolt6 x HNFM06ZP M6 Flange Nut
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/INT/TEE 50X50 PG
75 75 EM/STR/INT/TEE 75X75 PG
100 50 EM/STR/INT/TEE 100X50 PG
100 75 EM/STR/INT/TEE 100X75 PG
100 100 EM/STR/INT/TEE 100X100 PG
150 100 EM/STR/INT/TEE 150X100 PG
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/CROSS 50X50 PG
75 75 EM/STR/CROSS 75X75 PG
100 50 EM/STR/CROSS 100X50 PG
100 75 EM/STR/CROSS 100X75 PG
100 100 EM/STR/CROSS 100X100 PG
150 100 EM/STR/CROSS 150X100 PG
HNFM06ZPFlanged Hex Nut
GBM06 x 16ZPGutter Bolt
KBV Fast Lock Clips
33
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
Horizontal T-Section is supplied with the followingcomponents:1 x Horizontal T-Section Body2 x Horizontal T-Section Lid4 x KBV Fast Lock Clips6 x GBM06 x 16ZP M6 Gutter Bolt6 x HNFM06ZP M6 Flange Nut
CABLE TRUNKING
4-Way Cross Section
Edition Sheet1 / 1
4 Way Cross Section EM/STR/CROSS (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Cross.idwV13
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/CROSS 50x50 PG75 75 EM/STR/CROSS 75x75 PG100 50 EM/STR/CROSS 100x50 PG100 75 EM/STR/CROSS 100x75 PG100 100 EM/STR/CROSS 100x100 PG150 100 EM/STR/CROSS 150x100 PG
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
KBVFast lock clips
4 Way Cross Section is supplied with the following components: 1 x 4 Way Cross Section body1 x 4 Way Cross Section lid adaptor lid4 x KBV Fast lock clips8 x MGB0616ZP M6 Gutter bolt8 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
4 Way Cross Section EM/STR/CROSS (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Cross.idwV13
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/CROSS 50x50 PG75 75 EM/STR/CROSS 75x75 PG100 50 EM/STR/CROSS 100x50 PG100 75 EM/STR/CROSS 100x75 PG100 100 EM/STR/CROSS 100x100 PG150 100 EM/STR/CROSS 150x100 PG
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
KBVFast lock clips
4 Way Cross Section is supplied with the following components: 1 x 4 Way Cross Section body1 x 4 Way Cross Section lid adaptor lid4 x KBV Fast lock clips8 x MGB0616ZP M6 Gutter bolt8 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
4 Way Cross Section EM/STR/CROSS (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: Cross.idwV13
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/CROSS 50x50 PG75 75 EM/STR/CROSS 75x75 PG100 50 EM/STR/CROSS 100x50 PG100 75 EM/STR/CROSS 100x75 PG100 100 EM/STR/CROSS 100x100 PG150 100 EM/STR/CROSS 150x100 PG
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
KBVFast lock clips
4 Way Cross Section is supplied with the following components: 1 x 4 Way Cross Section body1 x 4 Way Cross Section lid adaptor lid4 x KBV Fast lock clips8 x MGB0616ZP M6 Gutter bolt8 x HMFN06ZP M6 Flange nut
4 Way Cross Section is supplied with the followingcomponents:1 x 4 Way Cross Section Body1 x 4 Way Cross Section Lid Adaptor Lid4 x KBV Fast Lock Clips8 x GBM06 x 16ZP M6 Gutter Bolt8 x HNFM06ZP M6 Flange Nut
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/CROSS 50X50 PG
75 75 EM/STR/CROSS 75X75 PG
100 50 EM/STR/CROSS 100X50 PG
100 75 EM/STR/CROSS 100X75 PG
100 100 EM/STR/CROSS 100X100 PG
150 100 EM/STR/CROSS 150X100 PG
GBM06 x 16ZPGutter Bolt
HNFM06ZPFlanged Hex Nut
KBV Fast Lock Clips
34
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CABLE TRUNKING
Flange Adaptor
Edition Sheet1 / 1
Flange Adaptor EM/STR/FA (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
C
Sheet size: A4Cadfile: FA.idwV14
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/FA 50x50 PG75 75 EM/STR/FA 75x75 PG
100 50 EM/STR/FA100x50 PG100 75 EM/STR/FA 100x75 PG100 100 EM/STR/FA 100x100 PG150 100 EM/STR/FA 150x100 PG
KBVFast lock clips
HMFN06ZPFlanged Hex Nut
MGB0616ZPGutter screw
Flange Adaptor is supplied with the following components: 1 x Flange Adaptor body1 x Flange Adaptor lid2 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Remove section oftrunking sidewall,
drill Ø8mm hole forM6 fixings
Edition Sheet1 / 1
Flange Adaptor EM/STR/FA (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
C
Sheet size: A4Cadfile: FA.idwV14
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/FA 50x50 PG75 75 EM/STR/FA 75x75 PG
100 50 EM/STR/FA100x50 PG100 75 EM/STR/FA 100x75 PG100 100 EM/STR/FA 100x100 PG150 100 EM/STR/FA 150x100 PG
KBVFast lock clips
HMFN06ZPFlanged Hex Nut
MGB0616ZPGutter screw
Flange Adaptor is supplied with the following components: 1 x Flange Adaptor body1 x Flange Adaptor lid2 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Remove section oftrunking sidewall,
drill Ø8mm hole forM6 fixings
Edition Sheet1 / 1
Flange Adaptor EM/STR/FA (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
C
Sheet size: A4Cadfile: FA.idwV14
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/FA 50x50 PG75 75 EM/STR/FA 75x75 PG
100 50 EM/STR/FA100x50 PG100 75 EM/STR/FA 100x75 PG100 100 EM/STR/FA 100x100 PG150 100 EM/STR/FA 150x100 PG
KBVFast lock clips
HMFN06ZPFlanged Hex Nut
MGB0616ZPGutter screw
Flange Adaptor is supplied with the following components: 1 x Flange Adaptor body1 x Flange Adaptor lid2 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Remove section oftrunking sidewall,
drill Ø8mm hole forM6 fixings
Flange Adaptor is supplied with the following components:1 x Flange Adaptor Body1 x Flange Adaptor Lid2 x KBV Fast Lock Clips4 x GBM06 x 16ZP M6 Gutter Bolt4 x HNFM06ZP M6 Flange Nut
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/FA 50X50 PG
75 75 EM/STR/FA 75X75 PG
100 50 EM/STR/FA 100X50 PG
100 75 EM/STR/FA 100X75 PG
100 100 EM/STR/FA 100X100 PG
150 100 EM/STR/FA 150X100 PG
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/TA 50X50 PG
75 75 EM/STR/TA 75X75 PG
100 50 EM/STR/TA 100X50 PG
100 75 EM/STR/TA 100X75 PG
100 100 EM/STR/TA 100X100 PG
150 100 EM/STR/TA 150X100 PG
HNFM06ZPFlanged Hex Nut
GBM06 x 16ZPGutter Bolt
KBV Fast Lock Clips
35© Mechanical Support Systems reserves the right to change designs and specifications without notice.
Flange Adaptor is supplied with the following components:1 x Flange Adaptor Body1 x Flange Adaptor Lid2 x KBV Fast Lock Clips4 x GBM06 x 16ZP M6 Gutter Bolt4 x HNFM06ZP M6 Flange Nut
CERTIFIED QUALITY SYSTEM – ISO 9001:2015REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
CABLE TRUNKING
Twist Adaptor
Edition Sheet1 / 1
Twist Adaptor EM/STR/TA (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: TA.idwV15
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Wid
th
Hei
ght
Wid
th
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/TA 50x50 PG75 75 EM/STR/TA 75x75 PG100 50 EM/STR/TA 100x50 PG100 75 EM/STR/TA 100x75 PG100 100 EM/STR/TA 100x100 PG150 100 EM/STR/TA 150x100 PG
KBVFast lock clips
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Twist Adaptor is supplied with the following components: 1 x Twist Adaptor body1 x Twist Adaptor lid2 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Twist Adaptor EM/STR/TA (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: TA.idwV15
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Wid
th
Hei
ght
Wid
th
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/TA 50x50 PG75 75 EM/STR/TA 75x75 PG100 50 EM/STR/TA 100x50 PG100 75 EM/STR/TA 100x75 PG100 100 EM/STR/TA 100x100 PG150 100 EM/STR/TA 150x100 PG
KBVFast lock clips
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Twist Adaptor is supplied with the following components: 1 x Twist Adaptor body1 x Twist Adaptor lid2 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Edition Sheet1 / 1
Twist Adaptor EM/STR/TA (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: TA.idwV15
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Wid
th
Hei
ght
Wid
th
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/TA 50x50 PG75 75 EM/STR/TA 75x75 PG100 50 EM/STR/TA 100x50 PG100 75 EM/STR/TA 100x75 PG100 100 EM/STR/TA 100x100 PG150 100 EM/STR/TA 150x100 PG
KBVFast lock clips
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Twist Adaptor is supplied with the following components: 1 x Twist Adaptor body1 x Twist Adaptor lid2 x KBV Fast lock clips4 x MGB0616ZP M6 Gutter bolt4 x HMFN06ZP M6 Flange nut
Twist Adaptor is supplied with the following components:1 x Twist Adaptor Body1 x Twist Adaptor Lid2 x KBV Fast Lock Clips4 x GBM06 x 16ZP M6 Gutter Bolt4 x HNFM06ZP M6 Flange Nut
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/TA 50X50 PG
75 75 EM/STR/TA 75X75 PG
100 50 EM/STR/TA 100X50 PG
100 75 EM/STR/TA 100X75 PG
100 100 EM/STR/TA 100X100 PG
150 100 EM/STR/TA 150X100 PG
HNFM06ZPFlanged Hex Nut
GBM06 x 16ZPGutter Bolt
KBV Fast Lock Clips
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected] 36
End Cap
CABLE TRUNKING
Edition Sheet1 / 1
End Cap EM/STR/EC (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: EC.idwV13
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EC 50x50 PG75 75 EM/STR/EC 75x75 PG100 50 EM/STR/EC 100x50 PG100 75 EM/STR/EC 100x75 PG100 100 EM/STR/EC 100x100 PG150 100 EM/STR/EC 150x100 PG
End Cap is supplied with the following components: 1 x End Cap2 x MGB0616ZP M6 Gutter bolt2 x HMFN06ZP M6 Flange nut
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Edition Sheet1 / 1
End Cap EM/STR/EC (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: EC.idwV13
Preliminary: For ApprovalC
opyr
ight
© M
echa
nica
l Sup
port
Syst
ems
28/0
3/20
17
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EC 50x50 PG75 75 EM/STR/EC 75x75 PG100 50 EM/STR/EC 100x50 PG100 75 EM/STR/EC 100x75 PG100 100 EM/STR/EC 100x100 PG150 100 EM/STR/EC 150x100 PG
End Cap is supplied with the following components: 1 x End Cap2 x MGB0616ZP M6 Gutter bolt2 x HMFN06ZP M6 Flange nut
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
Edition Sheet1 / 1
End Cap EM/STR/EC (W)x(H)Mechanical Support Systems
Designed by: B Mumme 28/03/2017
B
Sheet size: A4Cadfile: EC.idwV13
Preliminary: For Approval
Cop
yrig
ht ©
Mec
hani
cal S
uppo
rt Sy
stem
s 28
/03/
2017
Prepared by: Brimum Mechanical Draughting ph 021 172 8347
Width
Hei
ght
Width(mm)
Height(mm) Part Number
50 50 EM/STR/EC 50x50 PG75 75 EM/STR/EC 75x75 PG100 50 EM/STR/EC 100x50 PG100 75 EM/STR/EC 100x75 PG100 100 EM/STR/EC 100x100 PG150 100 EM/STR/EC 150x100 PG
End Cap is supplied with the following components: 1 x End Cap2 x MGB0616ZP M6 Gutter bolt2 x HMFN06ZP M6 Flange nut
MGB0616ZPGutter screw
HMFN06ZPFlanged Hex Nut
End Cap is supplied with the following components:1 x End Cap2 x GBM06 x 16ZP M6 Gutter Bolt2 x HNFM06ZP M6 Flange Nut
Width:(mm)
Height:(mm)
Part Number:
50 50 EM/STR/EC 50X50 PG
75 75 EM/STR/EC 75X75 PG
100 50 EM/STR/EC 100X50 PG
100 75 EM/STR/EC 100X75 PG
100 100 EM/STR/EC 100X100 PG
150 100 EM/STR/EC 150X100 PG
HNFM06ZPFlanged Hex Nut
GBM06 x 16ZPGutter Bolt
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
MECHANICAL SUPPORT SYSTEMS – CABLE TRAYNEW ZEALAND INTERNATIONAL CONVENTION CENTRE 2017
End Cap is supplied with the following components:1 x End Cap2 x GBM06 x 16ZP M6 Gutter Bolt2 x HNFM06ZP M6 Flange Nut
37
38 MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
MECHANICALSUPPORT.CO.NZ | 0508 CABLE TRAY | [email protected]
CERTIFIED QUALITY SYSTEM – ISO 9001:2015
3939
Down load a ca ta logue www.mechan ica l suppor t .co .nz
Get i n touch w i th us 0508 CABLE TRAY o r ( 09 ) 279-8292
Product Catalogue Range
REGISTERED COMPANYBS OHSAS 18001:2007 & AS/NZS 4801:2001
NZP1023HSCertificate No.
R
© Mechanical Support Systems reserves the right to change designs and specifications without notice.
All products manufactured in accordance with ISO9001 Standard
40© Mechanical Support Systems reserves the right to change designs and specifications without notice.
MECHANICALSUPPORT.CO.NZ0508 CABLE TRAY (0508 222 5387 )