Cilindros NeumáticosPneumatic CylindersEL Presión de trabajo 1 - 10 barEL Working Pressure 1 - 10 bar
SERIE EL
HIDROSTOCK
ESPERIA S.A.
ESPERIA S.A.PRESENTACIÓN INTRODUCTION
ESPERIA, S.A. proyecta y construye cilindros hidráu-licos desde el año 1.979 con una vocación de inte-gración con nuestros clientes, que se convierten asíen colaboradores. Nuestra actuación viene marca-da por esa colaboración, estrecha, que da comoresultado una implicación en sus proyectos ofrecién-doles sinergias y economías de escala que puedenincorporar a sus proyectos.
Otro de nuestros objetivos es el de la calidad,tanto del producto en sí, como del servicio queprestamos. Todo nuestro proceso productivo, asícomo las pruebas finales, van encaminados a eseobjetivo. Como resultado se obtuvo en el año 1997el certificado de aseguramiento de calidad reno-vándose en sucesivas etapas (ISO 9001:2008).
Los cilindros serie EL se han realizado para aplica-ciones que requieran una construcción compacta yreducida.Esta serie comprende diámetros pequeños ymedianos. Las cabezas de aluminio (UNI-3571) seacoplan al tubo mediante rosca. El tubo de latónchapeado, se utiliza con recorridos hasta 500 mm.El émbolo es de aluminio anticorodal, y lleva dosretenes de labio y una cinta antifricción. Los cilin-dros de esta serie se construyen en la versión dedoble efecto (utilizable también como simple efec-to sin muelle) y en la versión de simple efecto conmuelle de retorno.Bajo pedido se pueden suministrar cilindros espe-ciales (retenes de vitón, vástago inoxidable, rasca-dor vástago, etc.)
ESPERIA, S.A. projects and builds hydrauliccylinders since 1.979 with the objective of theintegration with our customers, who convertthemselves in collaborators. Our acts come dueto this collaboration, narrow, witch gives as aresult an implication in their projects, offeringbetter conditions and scale economies that canincorporate to their projects.
Another of our objectives is the quality, as thequality of the products than the service weoffer. All our productive process and the finaltest follow this objective. As a result ESPERIAS.A. obtained in 1997 the quality certificate,wich we have renewed in successive steps (ISO9001:2008).
The cilinders serie EL have been maked to appli-cations that need a construction compact andreduce.This serie includes small and medium diameters.The aluminium heads (UNI-3571) join to thetube by means of thread. El tubo de latón cha-peado, se utiliza con recorridos hasta 500 mm.El émbolo es de aluminio anticorodal, y llevados retenes de labio y una cinta antifricción. Loscilindros de esta serie se construyen en la ver-sión de doble efecto (utilizable también comosimple efecto sin muelle) y en la versión de sim-ple efecto con muelle de retorno.On request could be suministred special cylin-ders (retenes de viton, inoxidable rod, wiperrod, etc.)
ESPERIA, S.A. se reserva el derecho de modificar el diseño, material y dimensiones sin previo avisoESPERIA, S.A. reserves the right to modify the design, material and dimensions without prior notice
3
ÍNDICEINDEX
ESPERIA, S.A. S E R I EEL
PN 10 BAR
PáginaPage
- Presentación/Introduction .................................................................................... 3
- Índice /Index ..................................................................................................... 4
- Características /Specifications ............................................................................ 5
- Resumen de tipos de sujeción/Resume Fastening Type ............................................ 6
- Código de pedido/Model code ........................................................................... 7
- Cilindro Neumático ‘C’ con Charnela/Cylinder Pneumatic ‘C’ with Eye Mounting . . . . . . . 8
- Cil. Neumático ‘FA’ con Brida Anterior/Cyl. Pneumatic ‘FA’ with Rear Flange ............ 9
- Cil. Neum. ‘RFA’ con Brida Reducida/Cyl. Pneum. ‘RFA’ with Reduce Flange .............. 10
- Cil. Neumático ‘FP’ con Brida Posterior/Cyl. Pneumatic ‘FP’ with Front Flange ........... 11
- Cilindro Neumático ‘V’ con Rosca/Cylinder Pneumatic ‘V’ with Thread ..................... 12
- Cilindro Neumático ‘P’ con Patas/Cylinder Pneumatic ‘P’ with Foot ........................... 13
- Accesorios/Accesories ......................................................................................... 14
S E R I EEL
PN 10 BARESPERIA, S.A.
5ESPERIA, S.A. se reserva el derecho de modificar el diseño, material y dimensiones sin previo avisoESPERIA, S.A. reserves the right to modify the design, material and dimensions without prior notice
CARACTERÍSTICASSPECIFICATIONS
CamisaSleeve
Tubo Cilindro latónBrass Cylinder Tube
VástagoStem
Acero cromado espesor 0,025 mm. f70,025 mm thickness chromium plated steel, f7
FijacionesBindings
Patas, rosca, brida anterior, brida posterior, brida reducida, charnelaFeet, Front Flange, Rear Flange, Reduce Flange, Eye Mounting
TemperaturaTemperature
Mínima -20º C / Máxima +80º-20º C minimum / +80º máximum
PresiónPressure
Mínima de trabajo 1 bar / Máxima de trabajo 10 barMinimum working pressure: 1 bar / Maximum working pressure 10 bar
Grupo de cilindrosType Cylinders
Simple Efecto, Doble Efecto, Sin Amortiguadores, Vástago PasanteSimple Effect, Double Effect, Without Cushioning, Passed Stem
Tipo de construcciónMounting Style
Compacto, acoplamiento roscado entre tapas y tuboCompact, threaded couple between cups and tube
DIÁMETROSDIAMETERS 20 27 35 40 50 58 70 85 100
Peso (Kg.)Weight (Kg.) 0,19 0,25 0,43 0,62 1,00 1,20 1,80 3,35 4,10
TERMINAL VÁSTAGOSTEM TERMINAL M6x1 M8x1,25 M10x1,5 M10x1,5 M12x1,75 M14x2 M16x2 M18x2,5 M20x2,5
Carrera mínima (mm)Minimum stroke (mm) 20 25 35 60 70 60 70 90 100
Carrera máx. (mm)Max. stroke (mm) 200 270 350 400 500 580 700 850 1000
VÁSTAGOSTEM 8 10 12 12 14 16 18 20 24
Empuje a 6 bar (Kg)Push to 6 bar (Kg) 18 31 52 68 106 143 208 306 424
Consumo aire por recorri-do Nl/min., a 6 bar
Air Consumption per StrokeNl/min., to 6 bar
0,037 0,085 0,20 0,45 0,82 0,95 1,67 3,06 4,71
Conexiones rosca GASGAS thread connections 1/8” 1/8” 1/8” 1/8” 1/8” 1/4” 1/4” 1/4” 1/4”
S E R I EEL
PN 10 BARESPERIA, S.A.
ESPERIA, S.A. se reserva el derecho de modificar el diseño, material y dimensiones sin previo avisoESPERIA, S.A. reserves the right to modify the design, material and dimensions without prior notice
RESUMEN DE TIPOS DE SUJECIÓN - RESUME FASTENING TYPE
C
FPRFA
PV
FAver página 8
ver página 10
ver página 12
ver página 11
ver página 13
ver página 9
see page 8 see page 9
see page 11 see page 10
see page 12see page 13
6
S E R I EEL
PN 10 BARESPERIA, S.A.
7
CÓDIGO DE PEDIDO - MODEL CODE
TIPOTYPE
PISTÓNPISTON
VÁSTAGO Nº 1/2STEM No. 1/2
CARRERASTROKE
SUJECIÓNBINDING
TIPO JUNTASJOINT TYPE
VÁSTAGOSTEM
EL Ø
BN Cilindro BaseBase Cylinder
BC Charnela TraseraRear Hinge
BCR Charnela Trasera RótulaRear Joint Hinge
BD Brida delanteraFront Flange
BT Brida traseraRear Flange
BP Sujeción PatasFeet Binding
BM Sujeción MuñonesTrunnion Binding
F Acero Cromado (F-114)Chromium Plated Steel (F-114)
N Acero Alta Resistencia capa Cromo-NiquelHigh Resistance Steel with Chrome-Nickel plating
I Acero InoxidableStainless Steel
S StandardStandar
V Vitón, Alta TemperaturaViton, High Temperature
R Alta VelocidadHigh speed
Ejemplo - Example:EL Ø63/36/36x300 BN S F
/ x/
S E R I EEL
PN 10 BAR
ESPERIA, S.A. se reserva el derecho de modificar el diseño, material y dimensiones sin previo avisoESPERIA, S.A. reserves the right to modify the design, material and dimensions without prior notice
ESPERIA, S.A.
10
CILINDRO NEUMÁTICO “EL”, ‘C’ con charnelaCYLINDER PNEUMATIC “EL”, ‘C’ with Eye Mounting
ØRecorrido baseMinimum Stroke A B C CH D E F G H I
LM N O P
QH7 R
* **
20 20 8 M6x1 1/8” 6 30 9 8 16 28 11 2 7 15,5 6 8 22 5 24
27 25 10 M8x1,25 1/8” 8 35 12 10 20 28 13 4 10 21 7 9 25 6 28
35 35 12 M10x1,5 1/8” 10 45 15 12 24 28 14 5 11 23 9 12 32 8 32
40 60 12 M10x1,5 1/8” 10 50 15 12 32 32 15 4 10 26 10 18 40 10 36
50 70 14 M12x1,75 1/8” 12 61 18 14 32 32 18 6 12 28 12 25 49 12 42
58 60 16 M14x2 1/4” 14 70 21 16 32 34 18 7 18 33 14 26 54 14 45
70 70 18 M16x2 1/4” 16 82 24 18 35 36 19 8 19 35 16 35 67 16 50
85 90 20 M18x2,5 1/4” 18 98 27 20 44,5 38,5 21 8 20 36 18 40 76 18 60
100 100 24 M20x2,5 1/4” 20 114 30 24 50 40 23 9 21 45 20 40 80 20 70
* Para recorrido < al recorrido base** Para recorrido > al recorrido base
O P
Q
L + Stroke
BAR
E F G H L + Carrera I M N
QC C
D
Símbolo CETOP Symbols
* To strokes < that ‘minimum stroke’** To strokes > that ‘minimum stroke’
S E R I EEL
PN 10 BARESPERIA, S.A.
11
P
45°
CH
BØN D
C
MIL + Recorrido
C
HGOFE
A
R
Q
ESPERIA, S.A. se reserva el derecho de modificar el diseño, material y dimensiones sin previo avisoESPERIA, S.A. reserves the right to modify the design, material and dimensions without prior notice
ØRecorrido baseMinimum Stroke A B C CH D E F G H I
LM N O P Q R
* * *
20 20 8 M6x1 1/8” 6 30 9 8 4 38 11 2 7 3,5 23 2 39 4,25 50
27 25 10 M8x1,25 1/8” 8 35 12 10 5 41 13 4 10 4 30 2 48 4,5 58
35 35 12 M10x1,5 1/8” 10 45 15 12 6 44 14 5 11 4 36 2 54 5,5 66
40 60 12 M10x1,5 1/8” 10 50 15 12 7 54 15 4 10 3 40 3 57 6,5 69
50 70 14 M12x1,75 1/8” 12 61 18 14 7 54 18 6 12 3 54 3 75 6,5 87
58 60 16 M14x2 1/4” 14 70 21 16 8 55 18 7 18 4 60 3 82 6,5 100
70 70 18 M16x2 1/4” 16 82 24 18 10 57 19 8 19 4 70 4 100 8,5 119
85 90 20 M18x2,5 1/4” 18 98 27 20 11 68 21 8 20 4 80 4 120 10,5 140
100 100 24 M20x2,5 1/4” 20 114 30 24 12 74 23 9 21 4 88 4 137 10,5 160
Símbolo CETOP Symbols
CILINDRO NEUMÁUTICO “EL”, ‘FA’ con Brida AnteriorCYLINDER PNEUMAUTIC “EL”, ‘FA’ with Front Flange Mounting
* To strokes < that ‘minimum stroke’** To strokes > that ‘minimum stroke’
* Para recorrido < al recorrido base** Para recorrido > al recorrido base
ESPERIA, S.A. se reserva el derecho de modificar el diseño, material y dimensiones sin previo avisoESPERIA, S.A. reserves the right to modify the design, material and dimensions without prior notice
S E R I EEL
PN 10 BARESPERIA, S.A.
12
ØRecorrido baseMinimum Stroke A B C CH D E F H I
LM N O P Q R
* * *
58 60 16 M14x2 1/4” 14 70 21 16 33 18 17 28 4 60 3 82 6,5 75
70 70 18 M16x2 1/4” 16 82 24 18 34 19 20 31 4 70 4 100 8,5 90
85 90 20 M18x2,5 1/4” 18 98 27 20 36 21 21 33 4 80 4 120 10,5 110
100 100 24 M20x2,5 1/4” 20 114 30 24 41 23 22 34 4 88 4 137 10,5 120
Símbolo CETOP Symbols
P
45°
CH
C
B
A
ØN
E F O H L + Recorrido I M
D
CR
Q
CILINDRO NEUMÁUTICO “EL”, ‘RFA’ con brida reducidaCYLINDER PNEUMAUTIC “EL”, ‘RFA’ with reduce flange
L + Stroke
* Para recorrido < al recorrido base** Para recorrido > al recorrido base
* To strokes < that ‘minimum stroke’**To strokes > that ‘mimimum stroke’
S E R I EEL
PN 10 BARESPERIA, S.A.
13ESPERIA, S.A. se reserva el derecho de modificar el diseño, material y dimensiones sin previo avisoESPERIA, S.A. reserves the right to modify the design, material and dimensions without prior notice
CH
B
E F G
A
H IL + Recorrido O
ØN R
ØDC C
P
45°
Q
CIL. NEUMÁUTICO “EL”, ‘FP’ con brida posteriorCYL. PNEUMAUTIC “EL”, ‘FP’ with rear flange mounting
ØRecorrido baseMinimum Stroke A B C CH D E F G H I
LN O P Q R
* **
20 20 8 M6x1 1/8” 6 30 9 8 16 28 24 2 7 23 2 39 4,2 50
27 25 10 M8x1,25 1/8” 8 35 12 10 20 28 27 4 10 30 2 48 4,5 58
35 35 12 M10x1,5 1/8” 10 45 15 12 24 28 28 5 11 38 2 59 5,5 69
40 60 12 M10x1,5 1/8” 10 50 15 12 32 32 29 4 10 40 3 62 5,5 74
50 70 14 M12x1,75 1/8” 12 61 18 14 32 32 29 6 12 50 3 75 6,5 87
58 60 16 M14x2 1/4” 14 70 21 16 32 34 33 7 18 62 3 86 8,5 100
70 70 18 M16x2 1/4” 16 82 24 18 35 36 34 8 19 72 4 100 8,5 119
85 90 20 M18x2,5 1/4” 18 98 27 20 44,5 38,5 36 8 20 80 4 120 10,5 140
100 100 24 M20x2,5 1/4” 20 114 30 24 50 40 41 9 21 88 4 137 10,5 160
Símbolo CETOP Symbols
* Para recorrido < al recorrido base** Para recorrido > al recorrido base
* To strokes < that ‘minimum stroke’** To strokes > that ‘minimum stroke’
N
C
CH
CH1
BA
E F G H L + Recorrido I
O
M
C
D
S E R I EEL
PN 10 BARESPERIA, S.A.
14ESPERIA, S.A. se reserva el derecho de modificar el diseño, material y dimensiones sin previo avisoESPERIA, S.A. reserves the right to modify the design, material and dimensions without prior notice
CILINDRO NEUMÁTICO “EL”, ‘V’ con roscaCYLINDER PNEUMATIC “EL”, ‘V’ with thread
ØRecorrido baseMinimum Stroke A B C CH CH1 D E F G H I
LM N O
* **
20 20 8 M6x1 1/8” 32 6 30 9 8 16 28 11 2 7 3,5 5 M24x2
27 25 10 M8x1,25 1/8” 35 8 35 12 10 20 28 13 4 10 4 6 M28x2
35 35 12 M10x1,5 1/8” 40 10 45 15 12 24 28 14 5 11 4 7 M32x2
40 60 12 M10x1,5 1/8” 45 10 50 15 12 32 32 15 4 10 3 8 M36x3
50 70 14 M12x1,75 1/8” 50 12 61 18 14 32 32 18 6 12 3 10 M42x3
58 60 16 M14x2 1/4” 55 13 70 21 16 32 34 18 7 18 4 10 M45x3
70 70 18 M16x2 1/4” 60 16 82 24 18 35 36 19 8 19 4 10 M50x3
85 90 20 M18x2,5 1/4” 70 18 98 27 20 44,5 38,5 21 8 20 4 12 M60x4
100 100 24 M20x2,5 1/4” 85 20 114 30 24 50 40 23 9 21 4 14 M70x4
Símbolo CETOP Symbols
* Para recorrido < al recorrido base** Para recorrido > al recorrido base
* To strokes < that ‘minimum stroke’**To strokes > that ‘mimimum stroke’
S E R I EEL
PN 10 BAR
15
ESPERIA, S.A. se reserva el derecho de modificar el diseño, material y dimensiones sin previo avisoESPERIA, S.A. reserves the right to modify the design, material and dimensions without prior notice
V UU Z
T + Carrera
CH
L + Stroke
T + Stroke
F
B
E
A
G L + Carrera
CO
Q
C
CILINDRO NEUMÁTICO “EL”, ‘P’ con patasCYLINDER PNEUMATIC “EL”, ‘P’ with foot
R
S
N
ØD
C
ØRecorrido baseMinimum Stroke A B C CH D E F G
LN O P Q R S
TU V Z
* ** * **
20 20 8 M6x1 1/8” 6 30 9 8 44 2 7 17 8 21 4,25 42 52 12 17 8 19 13
27 25 10 M8x1,25 1/8” 8 35 12 10 48 4 10 19,5 10 25 4,5 45 55 20 30 8 20 17
35 35 12 M10x1,5 1/8” 10 45 15 12 52 5 11 22,5 12 25 5,5 57 69 21 27 8 20 17
40 60 12 M10x1,5 1/8” 10 50 15 12 64 4 10 25 14 30 5,5 64 78 20 26 8 25 22
50 70 14 M12x1,75 1/8” 12 61 18 14 64 6 12 30,5 16 32 5,5 77 93 26 32 10 22 22
58 60 16 M14x2 1/4” 14 70 21 16 66 7 18 35 16 35 6,5 86 102 27 38 10 26 25
70 70 18 M16x2 1/4” 16 82 24 18 71 8 19 41 18 36 6,5 100 118 28 39 10 28 26
85 90 20 M18x2,5 1/4” 18 98 27 20 83 8 20 46 20 38 8,5 118 138 30 42 11 27 27
100 100 24 M20x2,5 1/4” 20 114 30 24 90 9 21 57 22 40 8,5 136 158 33 45 12 28 28
Símbolo CETOP Symbols
* Para recorrido < al recorrido base** Para recorrido > al recorrido base
ESPERIA, S.A.
* To strokes < that ‘minimum stroke’**To strokes > that ‘mimimum stroke’
S E R I EEL
PN 10 BARESPERIA, S.A.
16ESPERIA, S.A. se reserva el derecho de modificar el diseño, material y dimensiones sin previo avisoESPERIA, S.A. reserves the right to modify the design, material and dimensions without prior notice
L
M
H
I
BA
EF
GC
D
Accesorios: HORQUILLA Accesories: PLAID ROD CLEVIS
DIMENSIONES/MEASURES (mm.)
TipoType A B C D E F G H I L M
FPF 6 10 M6 6 12 9 22 31 12 6 12 24
FPF 8 14 M8 8 16 12 30 42 16 8 16 32
FPF 10 18 M10 10 20 15 37 52 20 10 20 40
FPF 12 20 M12 12 24 18 44 62 24 12 24 48
FPF 14 24 M14 14 27 23 49 72 27 14 27 56
FPF 16 26 M16 16 32 24 59 83 32 16 32 64
FPF 18 26 M18 16 32 24 59 83 32 16 32 64
FPF 20 35 M20 16 45 32 49 80 45 23 25 65
Material: Acero/SteelTolerancia general ± 0,1 mm.General tolerances: ± 0,1 mm.
c/Arangutxi, 13Polígono Industrial de Júndiz01015 Vitoria-GasteizSPAINTfno:(+34) 945 290 105Fax:(+34) 945 290 356E-mail: [email protected]
www.hidrostock.com
HIDROSTOCK
ESPERIA, S.A.