ALL THE LATEST HAND TOOLS &
SPECIALIST TIMING TOOL EQUIPMENT!
EASILY SCAN QR CODES FOR FULL APPLICATION LIST ON TOOLS INSIDE!
www.techntools.ie
Gas Soldering Kit 8pcP/n: 3410
Hose Clip Tool 3/8” DriveP/n: 5781
Piston Ring Compressor P/n: 0285
Oil Filter Wrench - Metal BandP/n: 2830
Inner Tie Rod Tool - Multi PurposeP/n: 3829
High Torque Micro Ratchets SetP/n: 5822
Rear Suspension Tool - Trailing Arm BushesP/n: 4437
Camshaft Sprocket Hold-ing ToolP/n: 2869
Available From Your Nearest Stockist or Call 01 419 16 11 for Details!
• The soldering tool is lightweight, cordless with integral stand for cooling periods • Solder tip sizes include 3.4 and 4.6mm • Needle tip and hot knife tip with tip adaptor • Refillable from a standard gas canister • Storage case and sponge complete the set€43.00 +VAT RSP
• 3/8 “ drive • For hose clips found on modern engines • Ideal for difficult access areas • Jaw Opening 40mm • Time saver €26.00 +VAT RSP
• Adjustable 53mm to 125mm • For installing pistons into cylinder block • Allows piston and ring assembly to slide into the bore minimizing damage • Key handle allows compressor to be tightened • Time saver €18.00 +VAT RSP
• This metal band wrench will remove any cylindrical object up to a diameter of 105mm • Replaceable band Part No. 0139 • Suitable for old style oil filters • 65-105mm diameter • Turn knob adjustment €10.00 +VAT RSP
• Universal use • Capacity 33-42mm • Use to replace the inner tie rod ends without replacing the rack and pinion • Robust tool • Main body: (H) 32.70mm, (W) 58mm, (L) 70.21mm, Overall height 57.41mm €52.00 +VAT RSP
• 60 teeth gear operation • 1 x Hex bit driver ratchet (Ph2 bit included) • 1 x 1/4”D reversible ratchet • Chrome plated and polished • 80mm long with narrow profile head for precision and access€22.50 +VAT RSP
• Remove and install the bushes on trailing arm • Ford Focus Mk 1 & II (98-07)(07<) | Kuga 2008< | C-Max MPV 2007 | Mazda 3 (Chassis BK) 2003<09 Saloon and Hatch-back, 5 (Chassis CR, CW) MPV | 2005 Volvo V50 Estate 2004<2012, S40 Mk II Saloon 2003<2012€210.00 +VAT RSP
• A multi application wrench with variable adjustment • Holds the sprocket whilst releasing the fastener • Reduces potential damage to camshaft • Designed to allow the sprocket to be held still whilst undoing fixings • Adjustable.€18.25 +VAT RSP
Terms and conditions apply. Contact for details. Prices correct at time of publication and subject to change.
TOOLS & ACCESSORIES
Hose Clamp Pliers - Long ReachP/n: 4024
• The extra long reach on this tool allows for the removal of plastic and/or metal self tightening hose clamps • Hose clamps with diameters of 18mm-54mm (11/16”-2 1/8”) • Pliers can locked giving easier access • Flexible shaft • 640mm reach access jaws€35.00 +VAT RSP
• +Single Hex Hub nut socket 36mm • Applications include Ford KA and Fiat 500 • Thin walled providing better access • 78mm long with ½”D • Manufactured from Chrome Vanadium €12.50 +VAT RSP
Camshaft and Injection Pump Pulley PullerP/n: 5925
Hub Nut Socket 36mm (Deep Thin Walled)P/n: 6279
Hub Nut Socket - Ford Transit (Rear)P/n: 6553
Clamp for Strut Insert PistonsP/n: 6270
Seat Cover with Carry PouchP/n: 3007
Brake Caliper Re-wind Tool 4pc with CaseP/n: 6480
Socket Bi-Hex 3/4”D - 65mm (Transit Hubs)P/n: 3139
www.techntools.ie
• Universal use for most vehicles • Multi position to fit most sprockets • Time saver • Ideal for use in tight areas €33.00 +VAT RSP
• Required for the rear Hub Nuts on Ford Transit 2014< • Hex drive 19mm • Equal to OEM 205-1007 • Alignment tube required to ensure the socket works directly onto the slotted nut €74.50 +VAT RSP
• Designed to lock a McPherson Strut in its fully extended position when changing the springs • This tool is useful when working with struts equipped with strong internal springs (tension stop springs) that pull the strut shaft partly into the strut€14.50 +VAT RSP
• Washable seat cover • Re-usable • Allows side airbag to be activated • Easy fit • Lightweight • Carry Pouch€13.50 +VAT RSP
• Adjustable adaptor: fit pistons with a pin distance between 20 – 35 millimetres, covers popular vehicle applications • The set also includes an adjustable three-pin adaptor which is designed for electronic park brake calipers • A standard two-pin adaptor enables it to be used with any piston adaptor – single-pin versions€85.00 +VAT RSP
• 65mm • 3/4”D • Bi-Hex • Manufactured from Chrome Vanadium • Product Dimensions: 83 x 78 mm • Specially for the hub nuts on Ford Transit€30.00 +VAT RSP
EXCLUSIVE!
Comes with protective carry pouch!
Suspension Arm LeverP/n: 5627
Adaptor/Spinner Set 3pcP/n: 6372
• For removing ball joints, control arms and suspension joints • Length 100cm • 6 way adjustable tube Supplied in two sections for storage • External tube diameter 30mm €100.00 +VAT RSP
• Use singly or step up as a converter • 1/4”D>3/8”D>1/2”D>3/4”D • Knurled edge for grip when spinning sockets off • Manufactured from Chrome Vanadi-um (50BV30) • Chromed finish€13.00 +VAT RSP
Available From Your Nearest Stockist or Call 01 419 16 11 for Details!Terms and conditions apply. Contact for details. Prices correct at time of publication and subject to change.
TOOLS & ACCESSORIES
Diesel Injector Extractor with AdaptorsP/n: 6264
Air HammerP/n: 6031
Diesel Injector Extractor supplied with Diesel Injector Adaptors and accessories for removing most diesel injectors. For use with Laser Air Hammer 6031 *(not supplied)
Diesel injector extractor allows effective transmission of impact force and vibration to any adaptor with a 5/8” threadRegistered design and made in SheffieldIncludes 7 diesel injector adaptors: Siemens (2), Denso, High Pressure M12, Delphi, M16 Denso, Bosch Dual ConnectionPlus Valve Seat removal tool for Denso and off-line injector adaptor for access and a Bosch injector dismantling toolSupplied with full instructions and video on DVD. Air Hammer available - Part No 6031€400.00 +VAT RSP
•
••••••
•••••
The 6031 air hammer has a built in power regulator and a variable speed trigger. It works smoothly while delivering up to 2200 hammer blows per minute and makes efficient use of the compressed air supply with an average air consumption of just 4 cfm.
Laser air hammer can be used to cut sheet metal, making light work of removing rusty or damaged panelwork and floorpans. The air chisel attachment will quickly remove rusted-on exhaust pipes, drift attachments will remove stubborn or seized door hinge pins (or even valve guides in cylinder heads) in seconds and ball joint separator at-tachments will pop off a track-rod end quickly and easily. Seized bearings, brake discs and brake drums will soon submit to the vibrating hammer action, and the tool can even be combined with an impact driver to remove stubborn screws and fasteners. *(attachments not included)
Variable speed triggerBuilt in power regulatorQuick change chuck2200 blows per minute (bpm)/ stroke length 98mmAir hose size 3/8” ID, air inlet size 1/4 BSP, average air consumption 4.0cfm€95.00 +VAT RSP
In use with *Laser 6031.
Numerous uses. *See attachments.
DIESEL SERVICING
ESSENTIALDIESELTOOL!
Diesel Injector SeatCutter SetP/n: 4597
• Used for re-cutting injector seats when reconditioning the diesel injectors • Set of 4 cutters: 17mm flat cutter with 19mm external diameter for Mercedes-Benz CRD • 15mm flat cutter with 19mm external diameter for other makes • 17mm angles cutter with 21mm external diameter for Fiat | Iveco • 17mm flat cutter with 17mm external diameter for BMW | PSA | Renault€100.00 +VAT RSP
Diesel Injector Seat Cleaner Set - 14pcP/n: 6101
• For cleaning diesel injector seats prior to fitting new injectors • 2 x Silicone Nylon brushes 15mm | 20mm • 3 x Brass coated Steel wire brushes 18mm | 22mm | 25mm, 1 x Steel wire injector nozzle port cleaner • 224mm long bit driver with quick chuck, 6 x port sealing plugs plus insertion rod €75.00 +VAT RSP
Flexible Air Hose - YellowP/n: 6418
• 9.5mm x 15meters • Manufactured from matt finished, super flexible rubber/vinyl hybrid polymer material which lies flat when uncoiled • Resistant to oil ,UV rays, abrasion and weather(-40°+60°c) • Fitted with 1/4” BSPP fittings • Max. working pressure 300psi , minium bursting pressure 900psi€35.00 +VAT RSP
SPECIALIST TIMING TOOL EQUIPMENT
Camshaft Locking Tool - GMP/n: 3052
Engine Timing Tool Set - Renault enginesP/n: 3388
Diesel Timing Kit -Volkswagen | Audi | FordP/n: 1868
Dial Test IndicatorP/n: 2584
Camshaft Setting/Lock-ing ToolP/n: 3096
Engine Timing Tools - GMP/n: 3580
Cam Belt TensionerP/n: 3107
Camshaft Locking Tool - Rover K16P/n: 2626
Flywheel Holding ToolP/n: 3203
• Vauxhall/Opel 1.4/1.6 16v Ecotec engines • Colour coded - blue • OEM Ref KM 852 • For Saab 9-3 1.8 petrol engines: Z18XE (2003-2010) • Astra-G/H, Combo-C, Corsa-C, Meriva, Signum, Tigra-B, Vectra-B/C, Zafira-A/B (1998-2010)€18.50 +VAT RSP
• Renault K4J, K4M & F4P, F4R engines • Nissan F4P, F4R, K4J, K4M (2002-2010) • Nissan Kubistar, Primastar 1.6/2.0 engines • Renault Clio III • The set includes crank-shaft timing pin, TDC timing pin and camshaft setting bar plus the new bracket specifically for the Clio III with K4M 813 engine from 2003 onwards €68.00 +VAT RSP
• Set includes setting spigot OEM ref. 23-047/2064 • Setting bracket OEM ref. 21-105/2065A • For use on VAG models) • Also Ford Galaxy 1.9 TDI (95-00) • Made in Sheffield €15.00 +VAT RSP
• 41mm diameter x 0-8mm x 0.01mm • Precision tool • For checking the TDC on diesel engines • Also useful for checking run out on brake discs • Mounts directly onto the TDC Indicator (4151) to give an accurate reading for TDC€55.00 +VAT RSP
• Suitable for Fiesta, Puma, Escort, Focus, Courier, Mondeo, Tourneo, Transit, Transit Connect 1.8/2.0 • Also suitable for Mazda 121 • Includes camshaft locking strap 303-376/21-162B • Crankshaft locking screw OEM 303-574/21-163 • Crankshaft TDC locking screw OEM 303-507/21-210. €18.00 +VAT RSP
• For 1.0 12v X10XE and 1.2 16v X12XE engines • Agila, Astra-G/H, Combo-C, Corsa-B/C/D, Meriva-A, Tigra-B • With X10XE, Z10XE, Z10 XEP, X12XE, Z12XE, Z12 XEP, Z14XEL, Z14XEA engine codes • Chain driven engines • 1993-2010€67.50 +VAT RSP
• 18mm pin centres/3mm pins • Applications include: Seat | Skoda | Volkswagen | Audi • OEM ref Hazet 2587 | Matra V159 • Other versions of this tool are available including a swivel head version for access - Part No. 4447 • Cushioned grip€23.50 +VAT RSP
• Rover K series engines • OEM Toolcode 18G 1570 • MG Express, MGF, TF, ZR, ZS, ZT, ZT Turbo • Rover 100/200/25/400/45/75/Metro/Streetwise • With engine codes K16, 14K, 16K, K8 (1990-2006)€6.00 +VAT RSP
• Flywheel locking tool for Citroën and Peugeot vehicles • Citroën: Berlingo | Relay | Synergie 1.9D | TD • Peugeot: 205 | 305 | 306 | 309 | 405 | 605 | 806 • OEM ref 153A | 6012T | Facom D86 | 9765.54 • Time saver.€11.50 +VAT RSP
www.techntools.ie
Available From Your Nearest Stockist or Call 01 419 16 11 for Details!Terms and conditions apply. Contact for details. Prices correct at time of publication and subject to change.
SPECIALIST TIMING TOOL EQUIPMENT
• Renault 1.5 and 1.9 dCi engines fitted to Laguna, Kangoo and Clio models • Also Nissan Almera | Kubistar | Micra 1.5 dCi engines • Engine code K9K (2002-2010) • OEM codes MOT 1489/1054/1430 • Time saver €17.50 +VAT RSP
Engine Timing Tool Kit - Ford DuratorqP/n: 3773
Timing Pins - Renault enginesP/n: 4020
Timing Tool Kit - FordP/n: 4066
Timing Tools -Volkswagen 3 cylinderP/n: 4083
Locking Tool Set - Diesel EnginesP/n: 4086
Locking Tool Set - VAG | FordP/n: 3978
Timing Pins - Land Rover TD5P/n: 4052
Injection Pump PullerP/n: 4064
Guide Pulley WrenchP/n: 3894
• A special 5 piece kit containing the necessary special pins for 2.0 and 2.4 litre chain driven engines • For 1.4 TDCi Fiesta and Fusion (2002-2009) • Also 2.0 TDCi Mondeo chain engine, 2.2 TDCi Mondeo (04-07) • Plus 2.0 TDCi Tdi Transit (00-08) • 2.4 Tdi Transit (00-08) €31.00 +VAT RSP
• Timing tool kit for Ford Duratorq engines including timing pump removal and installation tools for 2.0/2.4 • For engines built from 2002-2010 • Includes camshaft/crank-shaft sprocket alignment pin, chain tensioner, fuel pump cover removal tool and fuel injection pump sprocket locking tool • Supplied in foam tray • Metal case available - Part No. 4536 €145.00 +VAT RSP
• Volkswagen Lupo and Polo 3 cylinder 6/12v 1.2 litre engines • Also Seat Cordoba and Ibiza 1.2 petrol engines (2002-2009) • OEM Ref. T10123/T10121/T10120Skoda Fabia II, Roomster 1.2P with engine codes AWY/BMD/AZQ/BME/BZG (2002-2010) • Storage case supplied €92.00 +VAT RSP
• A set of engine timing locking tools for the Ford TDDi/TDCi 1.8 engine • Engine codes C9DC, F9DA/B, C9DA/B, BHDA/BBHPA, HCPA • Includes locking strap, flywheel locking tool, TDC setting screw and camshaft sprocket puller • Supplied in storage case • For setting the timing chain see Part No. 4173€90.00 +VAT RSP
• Three engine timing tools for VW and Audi TDI PD engines • Includes tensioner locking tool OEM Ref. T10008 • Setting tool and injection pump locking for VW Passat 1.9 and Audi A4/A6 1.9 engines • Injection pump locking pin (OEM 3359/T20102/U40074) • Seat Alhambra, Altea, Arosa, Cordoba, Ibiza, Leon, Toledo 1.4/1.9/2.0 TDI PD engines • Part No. 4199 for arrow markings at 1 o’clock position (oval) T10100 €24.50 +VAT RSP
• Camshaft/crankshaft timing pins OEM Ref. LRT 12-058 • Flywheel locking pin OEM Ref. LRT 12-158 • For Defender, Discovery II with engine codes 10P, 15P, 16P (1999-2007)• Chain engines€12.00 +VAT RSP
• For 2.5 TDS engines in BMW (E34 | E36 | E38) | Land Rover | Vauxhall/Opel • Full engine locking tool kit also available • BMW OEM Ref. 11-5-120 • Land Rover OEM Ref. LRT12-119 • Vauxhall/Opel OEM Ref. KM 825€20.00 +VAT RSP
• Applications: Renault Megane II | Scenic II | Grand Scenic II • T50 - replaceable Part No. 0751 • Suitable on K4M and some K4J 1.4/1.6 petrol engines • OEM ref. MOT 1368 • 1/2”D€14.75+VAT RSP
www.techntools.ie
Camshaft Retaining Tool - VAGP/n: 4581
Engine Timing Tool Set - Ford Focus 1.6HDi/TDCiP/n:4145
Crankshaft Locking Tool - VolkswagenP/n: 4199
Timing Tool Set - FordP/n: 4347
Engine Timing Tool Kit - GM enginesP/n: 5549
Timing Tool Kit - Focus CMaxP/n: 4409
Flywheel Locking ToolP/n: 4275
Engine Timing Tool Kit - Vauxhall/OpelP/n: 4417
• Timing Tool Set for VAG TDi PD DOHC engines fitted to Audi A3/A4/A5/A6, Skoda Octavia II and Volkswagen Golf, Golf Plus, Jetta and Touran models • Includes two versions of Crankshaft Sprocket Locking Tool included • Full OEM reference and guidance notes included with each setSpecifically designed for Belt driven diesel engines€41.00 +VAT RSP
• A camshaft retaining adjuster tool • Ideal for a variety of VAG engines • OEM No 3366 • Specialist engine timing tool • For use with chain driven engines €6.85 +VAT RSP
• For 1.4/1.6 TDCi Ford chain engines with codes G8DA, G8DB, HHDA (2004-2006) • Supplementary kit for use on specific engines • OEM Ref: 303-734/21-162, 303-732/21-260 (2), 303-735/21-263 • Also suitable for other marques €19.15 +VAT RSP
• Arrow at 1 o’clock position between two bolt holes and an oval sprocket • OEM ref. T10100 • For 1.9/2.0 TDI PD engines • Fits Caddy, Eos, Golf, Jetta, Passat, Polo, Sharan, Tiguan, Touran, Transporter€16.00 +VAT RSP
• This new camshaft setting bar updates the existing 3096 and is suitable for all the applications • Also included in the kit is 303-748 (21-259) for Focus/C-Max 1.6, 1.4/1.6 and Fiesta/Fusion 1.2/1.4/1.6 • Also used on Volvo models with 1.8/2.0 CHAIN engines • Made in Sheffield • Camshaft Locking Strap now includes OEM 303-376B €28.00 +VAT RSP
• Engine timing tool kit for GM engines fitted to Vauxhall/Opel and other vehicles 16v 1.6 and 1.8 • Applications: Astra-G |H | Corsa-D | Insignia | Mervia | Signum | Vectra-C | Zafira-B 2003-2011 • Also fits Chevrolet Cruze, Orlando 1.4 | 1.6 | 1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines • Instructions included • Made in Sheffield€90.00 +VAT RSP
• This five piece set is essential f or replacing the Cam belt on Ford Focus/Cmax 1.6 Ti-VCT with engine code HXDA (2003-2007) plus 2.0 TDCi with engine codes G6DA, G6DB, G6DC 2003-2007 • Set includes Camshaft Sprocket Holding Tool (OEM 303-1097) • Tensioner Pulley Locking Pin ( OEM 303-1054) • Flywheel Timing Pin (OEM 303-1059), Crankshaft timing pin (OEM 303-748) • Camshaft Sprocket Locking Tool (OEM 303-735)€49.00 +VAT RSP
• For Ford diesel and petrol engines • 3 Piece • Flywheel Locking tool OEM 21-168/303-393 • Flywheel Locking tool adaptor (01) 303-393-01 • Flywheel Locking tool adaptor (01) 303-393-02€37.50 +VAT RSP
• Camshaft alignment pin OEM code KM 6340 • Tensioner locking pin KM 6333 • Suitable for Vauxhall/Opel/Astra G/ Astra H/ Meriva • 1.6 16v with engines Z16LET | Z16XEP 2003-2007 • Specialist engine timing tool€11.85 +VAT RSP
Timing Tool Set - VAGP/n: 4346
Engine Timing Tool Kit - VAG TFSI/FSIP/n: 5742
• Applications: 1.4/1.6FSi • Also 1.4 TSi and 1.2TFSi/FSi engines • Upgraded version of existing kit 5021 • OEM Cross reference and instructions provided • Made in Sheffield€200.00 +VAT RSP
SPECIALIST TIMING TOOL EQUIPMENT
Upgraded engine locking timing tool kit for the TFSi/FSi VAG engine. Applications available scan QR code.
Scan QR Code for Full Application List.
www.techntools.ie
Term and conditions Every effort is made to prevent any errors in this publication. If any should occur, we will advise you when ordering and proceed with the correct details. Goods returned for credit will not be eligible for any promotion with a free item. Free items may differ from those shown. If a free item is not available, an alternative will be offered of a similar value. Free items cannot be exchanged for cash. You are responsible for declaring any free item to Revenue. We reserve the right to remove and/or alter any product, price, offer or promotion advertised. All prices exclude VAT. All prices set as recomended selling price (RSP). Product pictures are for illustrative purposes only and actual goods may differ from those shown. Full terms and conditions are available on request. All prices quoted exclude VAT and are subject to change.
Log on to techntools.ie for the latest products & to find the nearest stockist in your area.