Quick Setup Guide
RS-1200Dual WAN Security Gateway
English
Espaol
Portugus
Slovensky
Deutsch
esky
16
11
6
1
21
26
31
36
11Dual WAN Security Gateway RS-1200 English
Important Information The AP modes default IP address is 192.168.1.1 The default Subnet Mask is 255.255.255.0 The default login name is admin The default password is admin
LED Indicators RS-1200
LED StatusIndicator Color ON Flashing
Power Green Power on - Status Green Ready to use Turning on
WAN1 Green - Sending/Receiving WAN2 Green - Sending/Receiving
LAN Green - Sending/Receiving DMZ Green Ready to use Sending/Receiving
WAN1 Port (WAN): Use this port to connect to a router, DSL modem, or Cable modem WAN2 Port (WAN): Use this port to connect to a router, DSL modem, or Cable modem LAN Port (LAN): Use this port to connect to the LAN network of the office.DMZ: connection to the Internet (FTP, SNMP, HTTP, DNS) Reset: Reset the Dual WAN Security Gateway to the original default settings. DC Power: Connect one end of the power supply to this port, the other
English
22Dual WAN Security Gateway RS-1200 English
2 WAN 1 LAN Connecting Example
LAN Port= 192.168.1.1 WAN1 Port= 61.11.11.11 WAN2 Port= 211.22.22.22 DMZ Port = 61.11.11.11
English
33Dual WAN Security Gateway RS-1200 English
STEP 1: Connect both the Administrators PC and the LAN port of the Dual WAN Security Gateway to a hub or switch. Make sure there is a link light on the hub/switch for both connections. The Dual WAN Security Gateway has an embedded web server used for management and configuration. Use a web browser to display the configurations of the Dual WAN Security Gateway (such as Internet Explorer 4(or above) or Netscape 4.0(or above) with full javascript support). The default IP address of the Dual WAN Security Gateway is 192.168.1.1 with a subnet mask of 255.255.255.0. Therefore, the IP address of the Administrator PC must be in the range between 192.168.1.2 192.168.1.254
WebUI Configuration example
By default, the Dual WAN Security Gateway is shipped with its DHCP Server function enabled. This means the client computers on the LAN network including the Administrator PC can set their TCP/IP settings to automatically obtain an IP address from the Dual WAN Security Gateway. The following table is a list of private IP addresses. These addresses may not be used as a WAN 1 / WAN2 IP address.
10.0.0.0 ~ 10.255.255.255 172.16.0.0 ~ 172.31.255.255 192.168.0.0 ~ 192.168.255.255
If the companys LAN IP Address is not subnet of 192.168.1.0, (i.e. LAN IP Address is 172.16.0.1), then the Administrator must change his/her PC IP address to be within the same range of the LAN subnet (i.e. 172.16.0.2). Reboot the PC if necessary.
STEP 2: Once the Administrator PC has an IP address on the same network as the Dual WAN Security Gateway, open up an Internet web browser and type in http://192.168.1.1 in the address bar. A pop-up screen will appear and prompt for a username and password. A username and password is required to connect to the Dual WAN Security Gateway. Enter the default login username (admin) and password (admin) of Administrator.
English
44Dual WAN Security Gateway RS-1200 English
Setting Up in Transparent Mode
STEP 1: After entering the username and password, the Dual WAN Security Gateway WEB UI screen will display. Select the Interface tab on the left menu and a sub-function list will be displayed.
Click on WAN from the sub-functionlist, enter proper Layer3 network setup informaion
Click Modify to modify WAN1/2 settings (i.e. WAN1 Interface) WAN1 interface IP Address 61.11.11.11
NetMask 255.255.255.0 Default Gateway 61.11.11.254 DNS Server1 168.95.1.1
Note: The above figures are only examples. Please fill in the appropriate IP address information provided to you by the ISP.
STEP 2: Click on the Policy tab from the main function menu, and then click on Outgoing from the sub-function list.
STEP 3: Click on New Entry button.
English
55Dual WAN Security Gateway RS-1200 English
STEP 4: When the New Entry option appears, enter the following configuration:
Source Address select Inside_Any Destination Address select Outside_Any Service - select ANY Action - select Permit ALL
Click on OK to apply the changes.
STEP 5: The configuration is successful when the screen below is displayed. Make sure that all the computers that are connected to the LAN port have their Default Gateway IP Address set to the Dual WAN Security Gateways LAN IP Address (i.e. 192.168.1.1). At this point, all the computers on the LAN network should gain access to the Internet immediately. If a Dual WAN Security Gateway filter function is required, please refer to the Policy section in the user manual.
English
66Dual WAN Security Gateway RS-1200 Espaol
Informacin Importante La direccin IP por defecto en modo AP es: 192.168.1.1 La Mscara de Subred por defecto es: 255.255.255.0 El nombre de ingreso por defecto es: admin La clave de ingreso por defecto es: admin
LEDs Indicadores RS-1200
LED EstadoIndicador Colr Encendido Titilando
Power Verde Encendido - Status Verde Listo Encendiendo
WAN1 Verde - Enviando/Recibiendo WAN2 Verde - Enviando/Recibiendo
LAN Verde - Enviando/Recibiendo DMZ Verde Listo Enviando/Recibiendo
Puerto WAN1 (WAN): Utilice este puerto para conectar un enrutador, modem DSL o Cable modem Puerto WAN2 (WAN): Utilice este puerto para conectar un enrutador, modem DSL o Cable modem Puerto LAN (LAN): Utilice este puerto para conectar a la red de la oficina.DMZ: conexin a Internet (FTP, SNMP, HTTP, DNS) Reset: Reiniciar el Gateway de Seguridad Dual WAN al estado original de Configuracin. DC Power: Conecte el conector del adaptador de DC.
Espaol
77Dual WAN Security Gateway RS-1200 Espaol
Ejemplo: Conexin de 2 puertos WAN+1 LAN
Puerto LAN = 192.168.1.1 Puerto WAN1= 61.11.11.11 Puerto WAN2= 211.22.22.22 Puerto DMZ = 61.11.11.11
Espaol
88Dual WAN Security Gateway RS-1200 Espaol
PASO 1: Conecte tanto el PC de Administracin como el puerto LAN del Servidor de Seguridad Dual WAN a un hub o switch. Asegrate que el indicador link del hub/switch est activo. El Servidor de Seguridad Dual WAN tiene un servidor web para administracin y configuracin. Utilice un navegador para desplegar las configuraciones del Servidor de Seguridad Dual WAN (Internet Explorer 4(o mayor) o Netscape 4.0(o mayor) con soporte de javascript). La direccin IP del Servidor de Seguridad Dual WAN es 192.168.1.1 con mscara de subred 255.255.255.0. Por lo tanto, la direccin IP del PC Administrador debe estar en el rango 192.168.1.2 192.168.1.254
Ejemplo de Configuracin WebUI
Por defecto, el Servidor de Seguridad Dual WAN es despachado con la funcin DHCP Server habilitada. Esto significa que llas PCs clientes en la red, incluyendo el PC Administrador pueden tener la configuracin TCP/IP para que automticamente obtenga su direccin IP del Servidor de Seguridad Dual WAN. La tabla siguiente es una lista de direcciones IP privadas. Dichas direcciones no deden ser utilizadas como direcciones WAN 1 / WAN2 IP.
10.0.0.0 ~ 10.255.255.255 172.16.0.0 ~ 172.31.255.255 192.168.0.0 ~ 192.168.255.255
Si la direccin IP de la LAN de la empresa no es una subred de 192.168.1.0, (ejemplo: la LAN IP es 172.16.0.1), entonces el administrador debe cambiar la direccin IP de su PC al mismo rango de la subred LAN (ejemplo: 172.16.0.2). Reinicie el PC si se requiere.
PASO 2: Una vez que el PC Administrador tenga la direccin IP en la misma red del Servidor de Seguridad Dual WAN, abra el navegador y escriba la siguiente direccin en la barra de comando: http://192.168.1.1. Una ventana se abrir pidiendo el nombre de usuario y clave. Se requiere que el usuario y clave sean introducidos para conectarse al Servidor de Seguridad Dual WAN. Introduzca el nombre de usuario por defecto (admin) y la clave de Administrador (admin).
Espaol
99Dual WAN Security Gateway RS-1200 Espaol
Configuracin en modo Transparente
PASO 1: Luego de introducir el nombre de usuario y clave se mostrar la interfz WEB UI. Seleccione la seccin Interface del men de la izquierda y una lista de sub-funciones ser mostrada.
Haga Click en WAN de la lista, introduzca la informacin adecuada de red capa 3
Haga Click en Modify para cambiar la configuracin WAN1/2 (ejemplo: WAN1 Interface)
WAN1 interface IP Address 61.11.11.11 NetMask 255.255.255.0 Default Gateway 61.11.11.254 DNS Server1 168 95 1 1
Nota: Las configuraciones anteriores son solo ejemplos. Introduzca por favor la direccin IP e informacin suministrada por su proveedor ISP.
PASO 2: Haga Click en Policy del men principal de funciones y despues haga click en Outgoing de la lista de sub-funciones.
PASO 3: Haga Click en el botn New Entry.
Espaol
1100Dual WAN Security Gateway RS-1200 Espaol
PASO 4: Cuando la opcin New Entry aparezca, introduzca la siguiente configuracin:
Source Address selecciona Inside_Any Destination Address selecciona Outside_Any Service - selecciona ANY Action - selecciona Permit ALL Click on OK to apply the changes.
PASO 5: La configuration es exitosa cuando se muestre la ventana siguiente. Asegrate que todas las computadoras que estan conectadas al puerto LAN tengan como direccin IP de compuerta de salida (Default Gateway IP Ardes) la IP del Servidor de Seguridad Dual WAN (ejemplo: 192.168.1.1). A este nivel, todas las PCs en red deben tener salida a Internet. Si se requiere alguna funcin de filtro del Servidor de Seguridad Dual WAN, por favor ir a la seccin de Polticas (Policy) del manual.
Espaol
11Dual WAN Security Gateway RS-1200 Portugus
Informao Importante Endereo IP por defeito para modo AP 192.168.1.1 Sub Mask por defeito 255.255.255.0 Nome de Login por defeito admin Password por defeito admin
Indicadores LED RS-1200
LED EstadoIndicador Cor ACESO CINTILAR
Power Verde Energia ligada - Status Verde Pronto a usar A ligar
WAN1 Verde - Envio/Recepo WAN2 Verde - Envio/Recepo
LAN Verde - Envio/Recepo DMZ Verde Pronto a usar Envio/Recepo
Porta WAN1 (WAN): Use para ligar a um router, modem DSL ou Cabo. Porta WAN2 (WAN): Use para ligar a um router, modem DSL ou Cabo. Porta LAN (LAN): Use para ligar rede LAN do escritrio. DMZ: Ligao Internet (FTP, SNMP, HTTP, DNS) Reset: Reponha as definies por defeito no Dual WAN Security Gateway. DC Power: Ligue uma extremidade do cabo de alimentao a esta portae
a outra extremidade tomada da parede.
Portugus
12Dual WAN Security Gateway RS-1200 Portugus
Exemplo de Ligao 2 WAN 1 LAN
LAN Port= 192.168.1.1 WAN1 Port= 61.11.11.11 WAN2 Port= 211.22.22.22 DMZ Port = 61.11.11.11
Portugus
13Dual WAN Security Gateway RS-1200 Portugus
PASSO 1: Ligue o PC do Administrador e a porta LAN do Dual WAN Security Gateway a um hub ou switch. Certifique-se que existe uma luz de ligao acesa no hub/switch para ambas as ligaes. O Dual WAN Security Gateway possui um servidor web embedded para gesto e configurao. Use um web browser para exibir as configuraes do Dual WAN Security Gateway (tal com o o Internet Explorer 4 (ou seguinte) ou Netscape 4.0 (ou seguinte) com suporte total para javascript). O endereo IP por defeito do Dual WAN Security Gateway 192.168.1.1 com uma subnet mask de 255.255.255.0. Logo, o endereo IP do PC do Administrador deve situar-se no intervalo entre 192.168.1.2 192.168.1.254
Exemplo de Configurao WebUI
Por defeito, o Dual WAN Security Gateway enviado com a funo Servidor DHCP activada. Isto significa que os computadores Client na rede LAN incluindo o PC do Administrador podem definir as definies TCP/IP para obter automaticamente um endereo IP do Dual WAN Security Gateway. A tabela seguinte uma lista de endereos IP privados. Estes endereos podem no ser usados como endereo IP WAN 1 / WAN2.
10.0.0.0 ~ 10.255.255.255 172.16.0.0 ~ 172.31.255.255 192.168.0.0 ~ 192.168.255.255
Se o endereo IP da LAN da empresa no a subnet de 192.168.1.0, (ex.: endereo IP LAN 172.16.0.1), o Administrador deve mudar o endereo IP do seu PC de forma a situar-se no mesmo intervalo da subnet LAN (ex.: 172.16.0.2). Volte a fazer o arranque do PC.
PASSO 2: Assim que o PC do Administrador tenha um endereo IP na mesma rede que o Dual WAN Security Gateway, abra um Internet web browser e escreva http://192.168.1.1 na barra de endereo. Aparece um ecr e espao para nome de utilizador (username) e palavra-chave (password). Ambos so necessaries para ligar ao Dual WAN Security Gateway. D entrada do nome de login por defeito (admin) e da palavra-chave (admin) do Administrador.
Portugus
14Dual WAN Security Gateway RS-1200 Portugus
Definio em Modo Transparent
PASSO 1: Aps dar entrada do nome de utilizador e palavra-chave, exibido o ecr WWEB UI do Dual WAN Security Gateway. Seleccione a opo Interface do menu da esquerda e ser exibida uma lista de funes secundrias.
Clique em WAN a partir da lista de funes secundrias, de entrada da informao de definio de rede Layer3.
Clique em Modify e altere as definies WAN1/2 (ex.: WAN1 Interface)
WAN1 interface Endereo IP 61.11.11.11 NetMask 255.255.255.0 Default Gateway 61.11.11.254 DNS Server1 168 95 1 1
Nota: A figura acima meramente um exemplo. Preencha com a informao de endereo IP fornecida pelo seu ISP.
PASSO 2: Clique na opo Policy a partir do menu principal e depois em Outgoing a partir da lista de funes secundrias.
PASSO 3: Clique em New Entry .
Portugus
15Dual WAN Security Gateway RS-1200 Portugus
PASSO 4: Quando aparece a opo New Entry, d entrada da configurao:
Source Address seleccione Inside_Any Destination Address seleccione Outside_Any Service - seleccione ANY Action - seleccione Permit ALL
Clique em OK para aplicar as mudanas.
PASSO 5: A configurao est efectiva quando o ecr abaixo exibido. Certifique-se que todos os computadores que esto ligados porta LAN possuem o seu endereo Gateway IP por defeito definido para o endereo IP LAN do Dual WAN Security Gateway (ex.: 192.168.1.1). Neste momento, todos os computadores na rede LAN devero poder aceder Internet imediatamente. Se for necessria uma funo de filtro Dual WAN Security Gateway, consulte a seco Policy no manual de utilizador.
Portugus
1166Dual WAN Security Gateway RS-1200 Slovensky
Dleit informcie Prednastaven IP adresa je 192.168.1.1 Prednastaven sieov maska je 255.255.255.0 Prednastaven meno pre prihlsenie je admin Prednastaven heslo pre prihlsenie je admin
LED kontrolky RS-1200
LED StavKontrolka Farba Svieti Blik
Power Zelen Zapnut - Status Zelen Pripraven tart systmu
WAN1 Zelen - Prjem/vysielanie WAN2 Zelen - Prjem/vysielanie
LAN Zelen - Prjem/vysielanie DMZ Zelen Pripraven Prjem/vysielanie
WAN1 Port (WAN): Port pre pripojenie k smerovau, DSL alebo kblovmu modemu WAN2 Port (WAN): Port pre pripojenie k smerovau, DSL alebo kblovmu modemu LAN Port (LAN): Port pre pripojenie k loklnej sieti DMZ: Port pre pripojenie serverov internetovch sluieb (FTP, SNMP HTTP, DNS) Reset: Nvrat konfigurcie k prednastavenm hodnotm. DC Power: Konektor pre pripojenie napjacieho sieovho adaptru
Slovensky
1177Dual WAN Security Gateway RS-1200 Slovensky
Prklad zapojenia s 2 WAN 1 LAN
LAN Port= 192.168.1.1 WAN1 Port= 61.11.11.11 WAN2 Port= 211.22.22.22 DMZ Port = 61.11.11.11
Slovensky
1188Dual WAN Security Gateway RS-1200 Slovensky
KROK 1: Pripojte k prepnau alebo hub-u administran PC a LAN port zariadenia. Skontrolujte, i sa rozsvietia prslun kontrolky na prepnai/hub-e pre obe pripojenia. Zariadenie m zabudovan web server pre manament a nastavenie parametrov. Pre nastavenie pouite prehliada internetu, napr. Internet Explorer 4 (a vy) alebo Netscape 4.0 (a vy) s plnou podporou javascript-u. Prednastaven IP adresa zariadenia je 192.168.1.1 so sieovou maskou 255.255.255.0. Administran PC teda me ma adresu z rozsahu 192.168.1.2 192.168.1.254
Prklad nastavenia parametrov
Zariadenie je prednastaven so zapnutou funkciou DHCP servra. Potae klientov ako aj administran PC teda mu ma nastaven TCP/IP na automatick zskanie IP adresy Nasledujca tabuka obsahuje zoznam privtnych IP adries. Tieto adresy obvykle nemu by pouit ako IP adresy pre WAN 1 / WAN2.
10.0.0.0 ~ 10.255.255.255 172.16.0.0 ~ 172.31.255.255 192.168.0.0 ~ 192.168.255.255
Ak s v LAN sieti pouit in IP adresy ako z podsiete 192.168.1.0, (napr. LAN IP adresa je 172.16.0.1), potom je potrebn zmeni IP adresu administranho PC tak, aby bola z rovnakho rozsahu (napr. 192.168.1.2). Retartujte PC, ak to bude potrebn.
KROK 2: Ak je IP adresa administranho PC z rovnakej IP siete ako m LAN port zariadenia, otvorte prehliada internetu a zadajte adresu http://192.168.1.1 do poa adries. Zobraz sa pop-up okno s vzvou na zadanie mena a hesla. Pre prstup k web rozhraniu je potrebn zada platn meno a heslo. Zadajte prednastaven hodnoty pre administrtora - meno (admin) a heslo (admin).
Slovensky
1199Dual WAN Security Gateway RS-1200 Slovensky
Nastavenie v mde Transparent
KROK 1: Po zadan mena a hesla sa zobraz konfiguran web rozhranie zariadenia. Zvote sekciu Interface v avom menu, rozbalia sa aie poloky menu.
Kliknite na WAN a zadajte prslun hodnoty pre sieov parametre TCP/IP.
Kliknite na Modify pre zmenu nastavenia WAN1 resp. WAN2 (zvote napr. WAN1):
WAN1 interface IP Address 61.11.11.11 NetMask 255.255.255.0 Default Gateway 61.11.11.254 DNS Server1 168.95.1.1
Upozornenie: Hodnoty na obrzku s len pre ilustrciu. Zadajte skuton hodnoty poda informci od Vho ISP.
KROK 2: Kliknite na sekciu Policy v hlavnom menu, potom na Outgoing z rozbalench poloiek.
KROK 3: Kliknite na tlaidlo New Entry.
Slovensky
2200Dual WAN Security Gateway RS-1200 Slovensky
KROK 4: Po zobrazen strnky New Entry zadajte nasledujce daje:
Source Address zvote Inside_Any Destination Address zvote Outside_Any Service - zvote ANY Action - zvote Permit ALL
Kliknite na OK pre akceptovanie zmien.
KROK 5: Nastavenie parametrov bolo spen, ak sa zobraz okno ako na tomto obrzku. Skontrolujte, i vetky potae pripojen k LAN portu zariadenia maj nastaven adresu vchodzej brny (Default Gateway) na IP adresu LAN portu zariadenia (napr. 192.168.1.1). Od tohto okamihu by mali ma vetky potae prstup na internet. Ak potrebujte pouva filtrovanie, podrobn informcie o nastaven njdete v manuli v sekcii Policy.
Slovensky
2211Dual WAN Security Gateway RS-1200 Russia
! IP 192.168.1.1 255.255.255.0 is admin admin
RS-1200
Power -
WAN1 - / WAN2 - /
- / DMZ /
WAN1 (): , DSL- WAN2 (): , DSL- LAN (): . DMZ: (FTP, SNMP, HTTP, DNS) Reset: . DC Power:
2222Dual WAN Security Gateway RS-1200 Russia
2 WAN 1 LAN
LAN= 192.168.1.1 WAN1= 61.11.11.11 WAN2= 211.22.22.22 DMZ = 61.11.11.11
2233Dual WAN Security Gateway RS-1200 Russia
1: LAN () - . , , . - -, . - , (Internet Explorer 4 ( ) Netscape 4.0 ( ) Java-). IP- - 192.168.1.1, 255.255.255.0. , IP- 192.168.1.2 192.168.1.254
- DHCP. , - , , TCP/IP IP- - . IP-. IP- WAN 1 / WAN2.
10.0.0.0 ~ 10.255.255.255 172.16.0.0 ~ 172.31.255.255 192.168.0.0 ~ 192.168.255.255
IP- 192.168.1.0 ( IP- 172.16.0.1), IP- , ( 172.16.0.2). ,
2: , IP- , - , http//192.168.1.1. . , - . (admin) (admin) .
2244Dual WAN Security Gateway RS-1200 Russia
Transparent Mode ( )
1: - . Interface () , .
WAN () Layer3
WAN1 / 2 ( WAN1), .
WAN1 IP- 61.11.11.11 255.255.255.0
61.11.11.254 DNS1 168.95.1.1
: . IP address (IP-) , .
2: Policy () , Outgoing ()
3: New Policy ( ).
2255Dual WAN Security Gateway RS-1200 Russia
4: Add New Policy ( ) :
Source Address ( ) Inside_Any
Destination Address ( ) Outside_Any
Service () ANY Action () Permit ALL , OK ().
5: , . , , , IP- - ( 192.168.1.1). . - , Policy () .
2266Dual WAN Security Gateway RS-1200
AP IP 192.168.1.1 255.255.255.0 admin admin
LED
RS-1200
LED Status ON -
WAN1 - / WAN2 - /
LAN - / DMZ /
WAN1 (WAN): DSL WAN2 (WAN): DSL LAN (LAN): LAN DMZ: (FTP, SNMP, HTTP, DNS) : 2 WAN DC : ()
2277Dual WAN Security Gateway RS-1200
2 WAN 1 LAN
LAN Port= 192.168.1.1 WAN1 Port= 61.11.11.11 WAN2 Port= 211.22.22.22 DMZ Port = 61.11.11.11
2288Dual WAN Security Gateway RS-1200
1: PC 2WAN LAN /2 WAN 2 WAN (javascript 4() 4.0()2 WAN IP 192.168.1.1 255.255.255.0 PC IP 192.168.1.2 192.168.1.254
WebUI
2 WAN DHCP PC LAN 2 WAN TCP/IP IP WAN1/WAN2 IP
10.0.0.0 ~ 10.255.255.255 172.16.0.0 ~ 172.31.255.255 192.168.0.0 ~ 192.168.255.255
LAN IP 192.168.1.0(i.e.LAN IP 172.16.0.1 )LAN (i.e.172.16.0.2) PC IP PC
2: PC 2 WAN IP http://192.168.1.1 2 WAN (admin)(admin)
2299Dual WAN Security Gateway RS-1200
1: 2 WAN WEB UI
WAN 3
WAN1/2 (i.e.WAN1 ) WAN1 IP 61.11.11.11
255.255.255.0 61.11.11.254 DNS 1 168.95.1.1
: ISP IP
2: Policy Outgoing
3: New Entry
3300Dual WAN Security Gateway RS-1200
4: New Entry :
Source Address Inside_Any Destination Address Outside_Any Service - ANY Action - Permit ALL
OK
5: LAN IP 2 WAN LAN IP i.e.192.168.1.1LAN 2 WAN
3311Dual WAN Security Gateway RS-1200 Deutsch
Wichtige Informationen Werkseitig voreingestellte IP-Adresse im AP-Modus: 192.168.1.1 Werkseitig voreingestellte Subnetzmaske: 255.255.255.0 Werkseitig voreingestellter Loginname: admin Werkseitig voreingestelltes Passwort: admin
LED-Anzeigen RS-1200
LED StatusAnzeige Farbe An Blinkend
Power Grn Gert einges. - Status Grn betriebsbereit Einschaltvorgang luft
WAN1 Grn - Senden/Empfangen WAN2 Grn - Senden/Empfangen
LAN Grn - Senden/Empfangen DMZ Grn einsatzbereit Senden/Empfangen
WAN1 Port (WAN): Benutzen Sie diesen Port zur Verbindung mit einem Router, DSL-Modem oder Kabelmodem. WAN2 Port (WAN): Benutzen Sie diesen Port zur Verbindung mit einem Router, DSL-Modem oder Kabelmodem. LAN Port (LAN): zur Verbindung mit einem lokalen Netzwerk (LAN) DMZ: zur Einbindung lokaler Internetdienste (FTP, SNMP, HTTP, DNS) Reset: Zurcksetzen des Bandbreitenmanagements auf die werkseitige Voreinstellung. DC Power: Schlieen Sie hier bitte das Netzteil an.
Deutsch
3322Dual WAN Security Gateway RS-1200 Deutsch
Beispielaufbau fr 2xWAN, 1xLAN
LAN-Port = 192.168.1.1 WAN1-Port= 61.11.11.11 WAN2-Port= 211.22.22.22 DMZ-Port = 61.11.11.11
Deutsch
3333Dual WAN Security Gateway RS-1200 Deutsch
Schritt 1: Verbinden Sie den Administrations-PC und den LAN-Port des Dual-WAN- Security-Bandbreitenmanagers mit einem Hub oder Switch. Vergewissern Sie sich, dass die LEDs fr beide Verbindungen am Hub/Switch leuchten. Der Dual-WAN-Security-Bandbreitenmanager verfgt fr das Management und die Konfiguration ber einen eingebauten Webserver. Zum Aufruf der Konfigurationsseite benutzen Sie bitte einen Webbrowser mit voller Untersttzung fr Javascript (z.B. Internet Explorer 4 (oder hher) oder Netscape 4.0 (oder hher). Die voreingestellte IP-Adresse des Bandbreitenmanagers ist 192.168.1.1 mit der Subnetzmaske 255.255.255.0. Somit muss sich die IP-Adresse des Administrations-PCs im Bereich von 192.168.1.2 bis 192.168.1.254 befinden.
Konfigurationsbeispiel fr das WebUI
Im Auslieferungszustand ist die DHCP-Funktion des Dual-WAN-Security- Bandbreitenmanagers aktiviert. Das bedeutet, dass die TCP/IP- Einstellungen der Client-Computer im lokalen Netzwerk und die des Administrations-PCs so konfiguriert werden knnen, dass diese Gerte automatisch eine IP-Adresse vom Security-Bandbreitenmanager beziehen. Die folgende Tabelle enthlt eine Liste privater IP-Adressen. Diese Adressen drfen nicht als IP-Adresse fr das WAN benutzt werden.
10.0.0.0 ~ 10.255.255.255 172.16.0.0 ~ 172.31.255.255 192.168.0.0 ~ 192.168.255.255
Falls die IP-Adressen des Firmen-LANs nicht im Subnetz 192.168.1.0, (z.B. Subnetz 172.16.0.0/24) liegt, so muss die Adresse des Administrations-PCs danach wieder auf eine Adresse aus diesem Bereich gendert werden (z.B. 172.16.0.2). Dies erfordert ggf. einen
Schritt 2: Sobald der Administrations-PC ber eine IP-Adresse aus dem gleichen Netzwerk wie der Security-Bandbreitenmanager verfgt, knnen Sie Ihren Webbrowser ffnen und in der Adressleiste http://192.168.1.1 eintippen. In einem Popup-Fenster werden Sie jetzt nach dem Benutzernamen und dem Passwort fr den Dual-WAN-Security-Bandbreitenmanager gefragt. Geben Sie hier den werkseitig voreingestellten Benutzernamen (admin) und das werkseitig voreingestellte Passwort (airlive) ein.
Deutsch
3344Dual WAN Security Gateway RS-1200 Deutsch
Den Transparent-Modus einstellen
Schritt 1: Nach Eingabe von Benutzernamen und Passwort sehen Sie die Webober- flche des Dual-WAN-Security-Bandbreitenmanagers. Whlen Sie links den Interface-Tabulator um die Einstellungen fr die Schnittstelle vorzunehmen.
Klicken Sie auf WAN in der Liste der Unterfunktionen und geben Sie die entsprechenden Informationen fr den Layer 3 des Netzwerks ein.
Klicken Sie auf Modify um die nderungen fr WAN1/2 vorzunehmen.
WAN1 interface IP Address 61.11.11.11 NetMask 255.255.255.0 Default Gateway 61 11 11 254
Anmerkung: Die obigen Angaben sind nur Beispiele. Bitte benutzen Sie die Daten, die Sie von Ihrem ISP erhalten haben.
Schritt 2: Klicken Sie zunchst auf den Policy-Tabulator im Hauptmen und dann auf Outgoing in der Liste der Unterfunktionen.
Schritt 3: Klicken Sie auf New Entry (neuer Eintrag).
Deutsch
3355Dual WAN Security Gateway RS-1200 Deutsch
Schritt 4: Nach Erscheinen des neuen Eingabefensters geben Sie bitte die folgende Konfiguration ein:
Source Address whlen Sie Inside_Any Destination Address whlen Sie Outside_Any Service whlen Sie ANY Action whlen Sie Permit
Um die nderungen durchzufhren klicken Sie dann bitte auf OK.
Schritt 5: Die Konfiguration war erfolgreich wenn ein Fenster wie unten angezeigt wird. Stellen Sie sicher, dass smtliche Computer, die mit dem LAN-Port verbunden sind, als Default-Gatewayadresse die LAN-IP-Adresse des Dual-WAN-Security-Bandbreitenmanagers eingestellt haben (z.B. 192.168.1.1). An dieser Stelle sollten smtliche Computer im LAN sofort Zugriff auf das Internet haben. Nheres zur Filterfunktion des Dual-WAN- Security- Bandbreitenmanagers erfahren Sie im Abschnitt Policy des Benutzerhandbuchs.
Deutsch
3366Dual WAN Security Gateway RS-1200 Czech
Vchoz nastaven Vchoz IP adresa 192.168.1.1 Vchoz podmaska st 255.255.255.0 Vchoz pihlaovac jmno admin Vchoz heslo admin
LED Indiktory RS-1200
LED StatusPopis Barva Svt Blik
Power Zelen Zapnuto - Status Zelen Pipraveno Zapnuto
WAN1 Zelen - Odesln/Pjem WAN2 Zelen - Odesln/Pjem
LAN Zelen - Odesln/Pjem DMZ Zelen Pipraveno Odesln/Pjem
WAN1 Port (WAN): Port na pipojen routeru, DSL modemu nebo kabelovho modemu WAN2 Port (WAN): Port na pipojen routeru, DSL modemu nebo kabelovho modemu LAN Port (LAN): Port na pipojen k mstn sti LAN DMZ: Pipojen na Internet (FTP, SNMP, HTTP, DNS) Reset: Reset Dual WAN Security Gateway do tovrnho nastaven. DC Power: Port na pipojen napjecho adaptru.
esky
3377Dual WAN Security Gateway RS-1200 Czech
2 WAN 1 LAN pklad nastaven
LAN Port= 192.168.1.1 WAN1 Port= 61.11.11.11 WAN2 Port= 211.22.22.22 DMZ Port = 61.11.11.11
esky
3388Dual WAN Security Gateway RS-1200 Czech
KROK 1: Pipojte PC a Dual WAN Security Gateway do hubu nebo switche, ujistte se, e ob zazen jsou sprvn zapojena (svt led dioda na hubu/switchi). Na konfiguraci Dual WAN Security Gatewaye mete pout webov konfiguran rozhran. Vchoz IP adresa Dual WAN Security Gateway is 192.168.1.1 s podmaskou st 255.255.255.0. Je nutn, aby IP adresa PC administrtora byla v rozsahu 192.168.1.2 192.168.1.254
Web UI pklad nastaven
Ve vchozm nastaven pouv Dual WAN Security Gateway vlastn DHCP server. To znamen, e klientsk potae v mstn LAN sti, vetn PC administrtora, mohou dostat pidlen nastaven TCP/IP automaticky z Dual WAN Security Gatewaye. Nsledujc tabulka je vpis privtnch IP adres, kter nemohou bt pouity jako IP adresy WAN 1 a WAN2.
10.0.0.0 ~ 10.255.255.255 172.16.0.0 ~ 172.31.255.255 192.168.0.0 ~ 192.168.255.255
KROK 2: Jestlie mme zapojen PC administrtora a Dual WAN Security Gateway ve stejn sti LAN, otevete si webov prohle a napite do adresnho dku http://192.168.1.1. Objev se pihlaovac okno. Vchoz pihlaovac jmno je admin a vchoz heslo je admin.
Pokud je vae firemn s nastavena v jinm subnetu ne 192.168.1.0, (nap: sov adresa je 172.16.0.1), tak potom mus Administrtor zmnit IP adresu pslunho PC do odpovdajcho rozsahu LAN subnetu (nap: 172.16.0.2). Pokud je to nutn restartujte PC
esky
3399Dual WAN Security Gateway RS-1200 Czech
Nastaven transparentnho mdu
KROK 1: Po pihlen se Vm objev konfiguran rozhran Dual WAN Security Gateway. Kliknte na zloku Interface v levm menu a objev se dostupn poloky.
Kliknte na WAN, vyplte sprvn informace o sovm pipojen Kliknte na Modify pro zmnu nastaven WAN1/2 (p. WAN1
rozhran) WAN1 nastaven IP adresa 61.11.11.11
Maska st 255.255.255.0 Vchoz brna 61.11.11.254 DNS Server1 168.95.1.1
Upozornn: Vyplnn hodnoty slou pouze jako pklad. Vyplte pole sprvn dle informac od vaeho internetovho providera.
KROK 2: Kliknte na Policy v hlavnm menu a dle na Outgoing z podmenu.
KROK 3: Kliknte na tlatko New Entry.
esky
4400Dual WAN Security Gateway RS-1200 Czech
KROK 4: Pot vlote nsledujc konfiguraci:
Source Address vyberte Inside_Any Destination Address vyberte Outside_Any Service - vyberte ANY Action - vyberte Permit ALL
Kliknte na tlatko OK k uloen zmn.
KROK 5: Konfigurace probhla v podku, jestlie vidte nsledujc obrzek. Ujistte se, e vechny pipojen potae do mstn st LAN maj nastavenu jako vchoz brnu Dual WAN Security Gateway LAN IP adresu (p. 192.168.1.1). V tomto okamiku se mohou vechny potae v mstn sti LAN pipojit na internet. Jestlie poadujete funkci filtru na Dual WAN Security Gateway, mete ji nastavit dle manulu v zloce Policy..
esky
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
OvisLink Corp. 2F, NO.8 Lane 130, Min Chuan Road, Hsin-Tien City Taipei, Taiwan