Transcript
Page 1: drop in, connect and inject. · 2020. 5. 12. · drop in, connect and inject. A completely pre-assembled and pre-wired Fusion G2 System allows for quick and easy one step drop in

key featuresCompletely pre-assembled and pre-wired• Fast,one-stepinstallationrequiringupto70%lesstimetoassemble/install.

wire armour• Protectsandroutesalllines.Actsasastablemountingplatform forplumbing.Reducesplatemachiningrequirements.

field replaCeable manifold and nozzle heaters• Simpleandeasytomaintain.

multiple heater zones per nozzle• Completecontrolandoptimizedthermalprofiles.

sCrewed in nozzles• Integratedleakproofprotection.

ValVe disk design• Rapidsystemcolorchangecapability.

Customizable with a wide range of options• Gettheexactsystemyourequire.

drop in, connect and inject.

Acompletelypre-assembledandpre-wiredFusionG2Systemallowsforquickandeasy

onestepdropininstallationandconnection.Ensuresyourmoldisbackintoproduction

asquicklyaspossible.Gearedtowardsmediumandlargeautomotiveandappliancepart

moldingapplications.

Page 2: drop in, connect and inject. · 2020. 5. 12. · drop in, connect and inject. A completely pre-assembled and pre-wired Fusion G2 System allows for quick and easy one step drop in

Plumbinginlet

SeQuentiAlCOntROl OPtiOn

Single POintCOnneCtiOn

mAnifOldWiRe ARmOR

SCReW-innOzzle

gAte SeAlPACkAge

integRAtedeleCtRiCAl PAnel

SyStemmOunting

HydRAuliCCylindeR pneumatic available

fusion g2 nozzle rangeSHot WeiGHt

per Gate*noZZLe

LenGtHS (mm)noZZLe MeLt FLoW

cHanneL (S/V )VaLVe pin dia. (mm)

MiniMUM pitcH (HY)

MiniMUM pitcH (pn)

MiniMUM pitcH (nV)

F3000 <15 g 55 - 200 Ø5 mm/ Ø7 mm 3 65 mm 65 mm 36 mm

F4000 15 g - 50 g 55 - 300 Ø6 mm/ Ø8 mm 3 65 mm 65 mm 38 mm

F5000 50 g - 500 g 80 - 485 Ø8 mm/ Ø11 mm 5 65 mm 85 mm 42 mm

F6000 500 g - 3500 g 80 - 700 Ø12 mm/ Ø16 mm 6/8 65 mm 85 mm 52 mm

F7000 3500 g+ 80 - 1000 Ø18 mm/ Ø22 mm 8 65 mm 105 mm 59 mm

system options• PN/HYsequentialvalvegatecontrol (valvebank)

• Valvepinpositionmonitoring

• Valvepinspeedcontrol

• Compoundnozzle

Forpeakperformanceandsuperiorresults,Mold-MastersrecommendsusingTempMasterM1pluscontrollerswithallFusionG2systems.

© 2017 milacron llC. All Rights Reserved.

www.milacron.com

aVailable gating stylesValVe gating options• Bi-MetallicC-Valve

• HotValve(+Extended)

*ApproximationOnly

thermal gating options• E-TypeTorpedo(+Extended)

• F-TypeTorpedo

• C-Sprue

• HotSprue(+Extended)


Recommended