WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
16k selecT series fifTh wheelFeaturing side-to-side pivot action to better accommodate hook-ups on uneven ground. Quick-easy installation, strong performance and easy removal in just seconds to allow full access to the truck bed.
FIFTH WHEEL HITCHES
6030
Shown with base rails (sold separately) also available with square tube slider (6031) or round tube slider (40119)
6032
6010
parT no. capaciTy pin capaciTy aDjusTmenT heighTs15k selecT series fifTh wheel (fore-anD-afT pivoT)
6030* 15,000 lbs. 3,750 lbs. 12-1/2” to 16-1/2”
6031* 15,000 lbs. 3,750 lbs. 13” to 17” w/square slider unit
16k selecT series fifTh wheel (Fore-and-aFt and side-to-side 4˚-5˚ pivot)
6032* 16,000 lbs. 4,000 lbs. 14-1/2” to 18”
6033* 16,000 lbs. 4,000 lbs. 15” to 18” w/square tube slider
40119* 16,000 lbs. 4,000 lbs. 15” to 18” w/round tube slider
20k selecT series fifTh wheel (fore-anD-afT pivoT)6021* 20,000 lbs. 5,000 lbs. 14-1/4” to 18-1/4”
16k selecT series fifTh wheel (fore-anD-afT pivoT)6022* 22,000 lbs. 5,500 lbs. 13-1/4” to 17-1/4”
parT no. qTy. DescripTion15k replacemenT parTs
6040 1 15K head Service6041 1 Cross member Service6644 1 Fifth wheel leg
16k replacemenT parTs
6042 1 16K fifth wheel hand only (service kit)
6043 1 Cross member - head Support only
6010 1 pivot head lockout (fits 16K only)
6044 1 Fifth wheel leg
20k replacemenT parTs6026 1 20K head assembly
50831 1 20K Base assembly w/adj.brackets
58187 1 20K pivot Beam only
221k replacemenT parTs6027 1 22K head assembly
50831 1 22K Base assembly w/adj. brackets
15k selecT series fifTh wheelQuick-easy installation, strong, reliable performance and easy removal in seconds allows full access to the truck bed for maximum versatility.
rails and installation kit must be ordered separately (30035). * * will not fit trucks with beds shorter than 6’ in length or flareside / stepside• 5 year limited warranty
6022*
Shown with base rails (sold separately)
6021*
20k selecT series fifTh wheelFeatures side-to-side pivot to better accommodatehook-ups on uneven ground. Quick installation, strong, reliable performance and easy removal to allow full truck bed access.
22k selecT series fifTh wheelSame great features as other fifth wheel hitches, with the capacity to haul the heaviest loads.
• 18,000 lbs. gross / 4,500 pin weight capacities• improved 4 way head pivot• 4˚ side to side head pivot for better control• 14” – 18” vertical adjustment• Forged single jaw• increased kingpin/jaw contact design• Self latching jaw design• King pin indicator• wider footprint for increased stability• Stamped rounded head• wider 9” (vs 6”) kingpin funnel area on head• vehicle specific under bed mounting kits • lockable handle (lock sold separately)• 1/4” turn handle “quick lock” mount system• Non-pin mounting reduces slop• Contemporary 21st century appearance• Folding tab washers for easy installation• 7 year limited warranty • extended length handle - pre-assembled fifth wheel units - Saves approximately one hour of assembly time - Foot assembly is hand tightened - includes wrench to tighten foot assembly - Shipped in one convenient carton
4028540847
40259
40270Designed for short bed and extended cab short bed pickups to provide additional turning clearance and to prevent damage to truck and trailer in tight locations at low speeds.• 10” travel• Fits 18K Signature Series® Fifth wheel• round rail design allows for smoother operation• operation from either side of unit (handle can be mounted on either side)• angled steel rollers reduces binding
parT no. DescripTion
40270 18K Signature Series® Slider, for use with the 18K Signature Series® fifth wheels only
24k signaTure series®
Note: will not fit trucks with beds shorter than 6’ in length or with flareside/ stepsideall 18K features except pre-assembled, plus:• 24,000 lbs. gross / 6,000 pin weight capacities• 14” – 16-1/2” vertical adjustment• reinforced head• heavier forged jaw
pre assembleD 18k wiTh or wiThouT sliDer
signaTure series® sliDer
parT no. DescripTion40847 18K Signature Series® - pre assembled
40285 18K Signature Series® with Slider - preassembled
40259 24K Signature Series®
• operates even when vehicle not in straight line• operation up to 45° angle.• lock pin for additional security• rubber grip handle for comfortable operation• the vertical adjustment is limited to 16” - 18”
*rail and installation Kit 30035 must be ordered separately.
30056
available in skid quantities of 16 (example: 30056-016)15k
30076*
available in skid quantities of 18 (example: 30076-018)
15kavailable in skid quantities of 24 (example: 49080-024)
FORMERLY
NEW PRODUCT!
NEW!
UPRATED!
NOW UPRATED!
NEW OFFERING!
parT no. capaciTy pin capaciTy aDjusTmenT heighTs
pro seriesTm fifTh wheel30056* 15,000 lbs. 3,750 lbs. 13” to 17’
pro seriesTm fifTh wheel wiTh square Tube sliDer30076 15,000 lbs. 3,750 lbs. 13” to 17”
* will not fit trucks with beds shorter than 6’ in length or flareside / stepside
• rounded Slide Bar jaw mechanism designed for automatic latching with cushion grip handle• 4-way pivoting head• Skid plate pivots 5° side-to-side for easier hookup on uneven ground and smoother towing• Jaw handle with tab for optional padlock security (padlock not included)• wide stance one-piece legs for improved stability• includes 30035 base rail kit• 3 year limited warranty
• 10” travel front to back• adjustable with trailer attached• Can be used with full size or mini trucks
• easy installation and removal allows for full access to truck bed• 5 year limited warranty
parT no. DescripTion capaciTy pin capaciTypre seriesTm 25k above-beD gooseneck49080* 25K Gooseneck hitch 25,000 lbs. 6,500 lbs.58208 Chevrolet Composite Bed Kit for gooseneck
requires 30035 universal base rail kit (sold separately)
50008
parT no. DescripTion
50008Slider round tube Kit for 15K & 16K Select Series, plus 18K Select plustm fifth wheel hitches
square Tube sliDer
• Designed for pro Series™, 15K & 16K Select Series models including Select plus• 12” travel front to back• round tube design allows for smoother operation• operation from either side of unit• angled steel rollers reduces binding• operates even when vehicle not in straight line operation up to 45˚ angle • lock pin for additional security• rubber grip handle for comfortable operation• tapered holes for easier pull pin engagement• 3” wide attachment allows for use with other fifth wheel hitches• uses existing base rail design• For use with short box pick-ups. prevents damage to cab when spotting trailer. rails and installation kit sold separately, see below.• minimum 13” extended trailer pin box recommended
rails and installation kit must be ordered separately (30035). Note: Check clearance between king pin bed and tailgate before moving to maneuvering position
• 10” travel fore-and-aft• works with full size and downsize mini trucks• Fully adjustable with trailer attached• minimum 13” extended trailer pin box recommended
rounD Tube sliDerparT no. DescripTion
30048Slider Square tube Kit for 15K & 16K Select Series, plus 18K Select plustm fifth wheel hitches
parT no. qTy. DescripTion6011 1 10” lube plate
6011
nylon lube plaTe
• protects fifth wheel plate from the wear of normal towing• eliminates the need for messy grease• For use with Select Series™ and pro Series™ fifth wheels only
parT no. DescripTion30035 rails & mounting Bracket Kit for full size trucks58058 rails (only) for full size trucks
30439 mounting Brackets and hardware (only) for full size trucks
* rail and installation kits must be ordered separately. Does not work with Signature Series® fifth wheel hitches.
30035rails and installation kits for full-size. Quick and easy installation with full truck bed access.
fifTh wheel rails & insTallaTion kiT
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
parT no. year DescripTionDoDge (fifTh wheel spare kiT)
58166 03-07 ram 1500/2500/350058186 03-07 ram 2500/3500 w/overload springs
58023* - 02-07 ram 1500, 03-07 ram 2500 w/o overload Springs
ToyoTa (fifTh wheel spare kiT)58197 00-06 tundra58309 07 tundra
chevroleT (fifTh wheel & gooseneck)58208 - Composite Bed Kit
forD 30080 04-07 F-150 rails and installation Kit58241 04-07 F-150 Fifth wheel Bracket Kit
58186
58166
58023*
58197
FORMERLY
NEW PRODUCT!
NEW!
UPRATED!
NOW UPRATED!
NEW OFFERING!Note: will not fit trucks with beds shorter than 6’ in length or flareside / stepside * Bracket kit part no. 58023 recommended when installing on 02-07 Dodge ram 1500 pickups
fifTh wheel aDapTer brackeTs anD harDwareinstallation brackets and hardware for full-size.
20110
fifTh wheel & gooseneck Trailer 90 Degree wiring • allows for easy hook-up of 5th wheel and gooseneck trailers • Durable connectors • 9 ft. lead reaches almost anywhere• includes spacer block and mounting hardware
20130
20131
50049
cusTom quick insTall brackeTs & kiTs
2013220134
FORMERLY
NEW PRODUCT!
NEW!
UPRATED!
NOW UPRATED!
NEW OFFERING!
• Fifth wheel installation guide (beds need to be at least 6’ long)• reduces install time by up to 50%• rail kit 58058 required for brackets • all hardware included
Note: B - No Drill, C - enlarge one hole, D - Drill one hole
fifTh wheel & gooseneck wiring harnessesthese kits plug into the factory vehicle wiring harness at the back of the truck and reach 7’ into the truck bed to the fifth wheel wiring
20223
118664
lock not included
58093
50223
parT no. qTy. DescripTion20223 1 dsp. pk. 7-way pre-wired u.S. Car Connector-7’ lead20224 1 dsp.pk. 7-way pre-wired u.S. Car Connector-4’ lead
parT no. qTy. DescripTion118666 1 bulk 6-way Connector-extension cable 7’118664 1 bulk 7-way Connector-extension cable 7’
parT no. DescripTion50223 Chain Bracket Kit, 18,000 lbs. each
parT no. DescripTion50223 pin lock plates for 1/2”pull pins for fifth wheels (4 pack)
pull pin lock plaTes
• prevents theft of fifth wheel and unwanted removal of pull pins• add a standard padlock to make the locking plate a security device
chain brackeT kiT
Fits reese Fifth wheel rails and most popular brands. provides secure attachment for trailer safety chains.
fifTh wheel & gooseneck exTensions
fifTh wheel & gooseneck wiring harnesses
parT no. DescripTion40261* 18K Select plus Seriestm
40163* 18K Select plus Seriestm w/round tube slider40164* 18K Select plus Seriestm w/ square tube slider
•18,000 lbs. gross, 4,500 lbs. pin weight capacities•14” to 18” vertical height adjustment•Features Signature Series™ head… - tough, heavy-duty stamped head looks just like the ones on the real tractor-trailers! - 4 way (front & back/side-to- side) head pivot - 6˚ side-to-side head pivot - Kingpin indicator - increased kingpin contact design - wider 9” kingpin funnel area - Forged single jaw - Self-latching jaw design•5 year limited warranty
40261*
Towing has never been easier when using the select plus fifth wheel system.
40164*
40163*
Features our Signature Series® head, with the base and mounting kit that you already know & love from our Select Series line of fifth wheel hitches!the above bed rail system uses the popular universal mounting kit 30035 (sold separately) or the new vehicle specific custom quick install kits which reduce install time by up to fifty percent.
18K Selectplus™ fifth wheel
18K Select plus™ fifth wheel offered w/square tube slider
18K Select plus™ fifth wheel offered w/round tube slider
THE FIFTH WHEEL YOU KNOW, BUT BETTER!
rails and installation kit must be ordered separately (30035).*will not fit trucks with beds shorter than 6’ in length & flareside / stepside
18k selecT plus™ fifTh wheel
year moDel harness # 90 Degree #chevroleT / gmc99-06 Silverado/Sierra w/factory 7-way 20110 201342007 Classic Silverado/Sierra w/factory 7-way 20110 201342007 Silverado/Sierra (New Body Style) 20110 20134
DoDge00-07 ram, Full Size w/factory 7-way 20111 20132
forD04-07 F-150 (New Body Style) w/factory 7-way 20110 20134
99-07F-250/350/450/550 Super Duty w/factory 7-way
20110 20134
ToyoTa 2007 tundra w/factory 7-way 20113 20113
year moDel bkT# kiT# noTechevroleT / gmc
99-07 Classic 1500/2500, 6’ & 8’ Beds 50041 50041-58 D01-07 Classic 3500, 8’ Bed 50041 50041-58 D2007 2500 hD 6’ & 8’ Beds (New Body Style) 50041 50041-58 D2007 3500 hD 6’ & 8’ Beds (New Body Stye) 50041 50041-58 D
DoDge02-07 1500, 6’ & 8’ Beds (except mega Cab) 50040 50040-58 B03-07 2500 hD, 6’& 8’ Beds exc mega Cab & models w/overload Springs 50040 50040-58 B
forD04-07 F-150, 6’ & 8’ Beds (New Body Style), except Flareside 50044 50040-58 B05-07 F-250/F-350 Super Duty (except Cab & Chassis 50049 50059-58 D
ToyoTa 00-06 tundra regular Cab & long Bed 50059 50059-58 B
FIFTH WHEEL HITCHES &WIRINg HARNESSES