Digital oblique images for CyclomediaLarge data acquisition project in the Netherlands

BSF Swissphoto, together with its partners Getmapping and Miramap, wascommissioned by the Dutch data supplier Cyclomedia with the area-wideacquisition of nadir and oblique images. The project will run until the end of2020, during which time a total of 36,000 km2 will have to be flown andoblique images with a resolution of 10 cm captured. At the same time, laserdata with a point density of 5-10 P/m2 will be acquired.

The Leica Citymapper Airborne Hybrid Sensor will be used, which enables thesimultaneous acquisition of oblique images and laser data and was speciallydesigned for airborne imaging of urban regions and Smart City applications.

With this sensor, approx. 600 flight hours will be completed over the next 2years and approx. 2.8 million images (vertical and oblique) will be taken.These are processed by our employees in a computationally intensiveprocess, the estimated processing time is 1'000 h.

The data will then be sold by Cyclomedia to Dutch customers interested inimage-based, georeferenced applications, e.g. in infrastructure planning orenvironmental monitoring.

Translated with www.DeepL.com/Translator

NetherlandsCyclomedia2019-2020

Expertise

3D Mapping