8/10/2019 Detailing Manual
1/52
8/10/2019 Detailing Manual
2/523Detailing System
Introducing the3M Automotive
Detailing SystemA Complete System that Includes Cleaners,
Dressings, Polishes, Waxes and more.
Long the standard of quality and the preferred paint
finishing system among automotive professionals, 3M offers
a Detailing System for expanded customer
satisfaction, increased worker safety, environmental
compliance and product value.
This state-of-the-art system incorporates several safer
products, technological advancements for excellent
results, easy dispensing systems and other innovations
to achieve the ultimate in detailing system performance.
This complete line is the only system you need to
deliver quality detailed vehicles for expanded
customer satisfaction.
3M Detailing System
For the Life of Your Car
8/10/2019 Detailing Manual
3/52
Table of Contents
SAFETY STATEMENT 3
INSPECT AND PRE-CLEAN 4
HEAVY CLEANING 6
EXTERIOR CLEANING 8
POLISHING, BUFFING, WAXING & EXTERIOR DRESSING 10
INTERIOR CLEANING 12
FINAL INSPECTION CHECKLIST 14
BODY SHOP CLEAN-UP GUIDE 15
PAINT FINISHING DOS AND DONTS 17
PAINT REPAIR PROCEDURE 19
DILUTION RATIOS 21
DILUTER USAGE Installation / Troubleshooting 23
PRODUCT INFORMATION 27
DETAILING FINAL EXAM 43
ORDERING INFORMATION 45
8/10/2019 Detailing Manual
4/523
WARNING
Before handling or using detailing chemicals, be sure to read
the Material Safety Data Sheet (MSDS) for health hazard
data, precautionary information, and suggested first aid.
WARNING
Fire hazard.
Window Cleaner concentrate solution is flammable.
Keep away from open flame; no smoking nearby.
CAUTION
Eye irritation -- wear eye protection when dispensing
solutions and when replacing concentrate bottle solutions.
Skin irritation -- wear rubber gloves when dispensingsolutions and when replacing concentrate bottle solutions.
CAUTION
Eye hazard.
Flying particles and dust.
Wear safety glasses with side shields when
drilling or hammering.
3M Detailing Products Safety Statement
Read and understand all safety information before using this product.
Wear appropriate personalprotective equipment to include:
Boots
Chemical resistant gloves
Aprons
Eye protection
No loose fitting clothing or articles that may be caught in moving parts
Avoid belts with buckles that may damage painted surfaces
Avoid sharp objects that may damage leather or fabric upholstery
SAFETYSTATEMENT
Consult local regulation for VOC compliance.
SAFETYSTATEMENT
8/10/2019 Detailing Manual
5/524
3M Automotive Reconditioning Guide
INSPECT & PRE-CLEAN
Inspect the vehicle. Note any adhesive residue, tree sap, or bug spatters that will need to be specially treated. Use
an air blower to remove leaves from trunk jambs and engine cowlings. Check for loose or missing caps on power
steering, power brakes, oil filler, etc.; tighten or replace if necessary. Remove all trash from interior including trunk,
ashtray, and seat folds. Inspect the interior carpet and fabric upholstery for any stains or heavily soiled areas that will
require pre-spotting.
Pre-spot any stained or heavily soiled interior carpet or fabric upholstery surfaces using 3M All Purpose Cleaner
and Degreaser, diluted at 1:15 (1 part concentrate plus 15 parts water) and brush lightly. Pre-spotting and brushing
greatly enhances the effectiveness of the cleaner and reduces the time needed to remove the stains later in the process.
2.
1.
8/10/2019 Detailing Manual
6/525
3M Automotive Reconditioning Guide
INSPECT & PRE-CLEAN
Apply 3M Heavy Duty Wheel Cleaner to the wheels. Use the following steps to achieve maximum performance:
Step 1: Determine which concentration to use based on experience.
- Use a 1:2 dilution for lightly soiled wheels (1 part concentrate plus 2 parts water)
- Use 100% concentrate for heavily soiled wheels (undiluted).
Step 2: Spray 3M Heavy Duty Wheel Cleaner onto a DRY wheel. Pre-rinsing the wheel dilutes the product,
reducing its effectiveness.
DO NOT use 3M Heavy Duty Wheel Cleaner on glass, engines, anodized wheels and/or wheels with no
coating or with coating cracked or in poor condition. Glass that is stained by the 3M Heavy Duty Wheel
Cleaner can not be repaired and will need to be replaced.Note: 3M Heavy Duty Wheel Cleaner does not contain hydrofluoric or other strong acids.
Apply 3M All Purpose Cleaner and Degreaser, diluted at 1:15 (1 part concentrate plus 15 parts water), to the
engine and engine compartment (lightly), tires, wheels, wheel wells, rocker panels, door and trunk jams, etc. Let
stand for 1 to 2 minutes. Rinse or wipe down engine and engine compartment surfaces with towel.
Note: 3M Heavy Duty Wheel Cleaner works best on brake dust, while 3M All Purpose Cleaner and Degreaser
works best on other soils. For best results, use both products on wheels.
4.
3.
IN
SPECTANDPRECLEAN
8/10/2019 Detailing Manual
7/526
3M Automotive Reconditioning Guide
HEAVY CLEANING
Scrub tires, wheels, and other heavily soiled areas as necessary. A medium stiffness bristled brush works best on
tires and most wheels, however, for chrome wheels, a wash mitt or terry cloth towel often produces better results.
Thoroughly rinse all of the exterior areas where 3M Heavy Duty Wheel Cleaner and/or 3M All Purpose Cleaner
and Degreaser have been applied. Rinse or wipe down engine and engine compartment last.
Do not spray or rinse water on sensitive electrical engine components.
Note: It is recommended that you start the engine when rinsing or spraying
the engine compartment with water.
2.
1.
8/10/2019 Detailing Manual
8/527
3M Automotive Reconditioning Guide
HEAVY CLEANING(CONTINUED)
Remove any adhesive residue from the vehicles exterior surfaces using 3M Adhesive Remover with a towel or
scrub pad. No longer available for sale in California. Suggested replacement: 3M General Purpose Adhesive
Cleaner (PN 08984 or PN 08987).
3.
HEAVYCLEANING
8/10/2019 Detailing Manual
9/528
3M Automotive Reconditioning Guide
EXTERIOR CLEANING
Apply 3M All Purpose Cleaner and Degreaser, diluted at 1:15 (1 part concentrate plus 15 parts water) onto
any bug spatters.
Wash the vehicle using 3M Car Wash Soap diluted at 1:100 (1 part concentrate plus 100 parts water) and a clean,
soft, sponge, towel, wash mitt or 3M Detail Cloth. Start at the top and work downward, scrubbing the areas with
bug spatters last.
Note: 3M Car Wash Soap cleans effectively at a 1 to 100 dilution ratio. Increasing the concentration will increase
the suds but will also be more difficult to rinse off.
2.
1.
8/10/2019 Detailing Manual
10/529
3M Automotive Reconditioning Guide
EXTERIOR CLEANING(CONTINUED)
Optional step (if needed or necessary): Clay the vehicle as needed with 3M Perfect-It III Cleaner Clay using the
diluted 3M Car Wash Soap as a lubricant. This step may also be done after the vehicle is dry using 3M
Perfect-It Gloss Enhancer as a lubricant.
Rinse the entire vehicle thoroughly and dry using a chamois or a clean, soft, cotton terry cloth towel.
Optional step if needed or necessary: Remove any tree sap deposits on glass surfaces using 3M Glass Cleaner
undiluted and a terry cloth towel. Inspect vehicle after wash to identify any tree sap or similar deposits that were
not removed by washing.
EXTERIORCLEANING
4.
5.
3.
8/10/2019 Detailing Manual
11/5210
3M Automotive Reconditioning Guide
POLISHING, BUFFING, WAXING &
EXTERIOR DRESSING
1.
Buffing PadCharacteristics
Compound / PolishCharacteristics
05703
05719
05704
05705
05713
05723
05725
Aggressiveness
Finish
Coarse
Fine
05954 / 05955
05973 / 05974
38105
05928 / 05929
38116
38133
3811139030 / 38112
Aggressiveness
Finish
Most Coarse
Least Fine
Least
Most
Polish as needed using the following guidelines:
Recommended polishing steps:
- Swirls and fine scratches:
Step 1. Polish using 3M Detail Polish 108 with a 3M Perfect-It FoamPolishing Pad, PN 05725.
Step 2. Wax.
- Oxidation and medium scratches:
Step 1. Polish using 3M Detail Polish 208 with a 3M Superbuff PolishingPad, PN 05705.
Step 2. Polish using 3M Detail Polish 108 with a 3M Perfect-It FoamPolishing Pad, PN 05725.
Step 3. Wax.
- Heavy oxidation and coarse scratches:
Step 1. Compound using 3M Detail Compound 308 with a 3M Superbuff III2 Plus 2 Buffing Pad, PN 05704.
Step 2. Polish using 3M Detail Polish 108 with a 3M Perfect-It FoamPolishing Pad, PN 05725.
Step 3. Wax.
Polishing materials:
- 3M Detail Compound 308 = fastest cut / coarsest finish- 3M Detail Polish 208 = less cut / finer finish
- 3M Detail Polish 108 = least cut / finest finishPolishing pads:
- 3M Superbuff III 2 Plus 2 Buffing Pad, PN 05704 = fastest cut / coarsest finish- 3M Superbuff Polishing Pad, PN 05705 = less cut / finer finish- 3M Perfect-It Foam Compounding Pad, PN 05723 = less cut / finer finish- 3M Perfect-It Foam Polishing Pad, PN 05725 = least cut / finest finish
8/10/2019 Detailing Manual
12/5211
3M Automotive Reconditioning Guide
POLISHING, BUFFING, WAXING &EXTERIOR DRESSING
(CONTINUED)
Wax the painted surfaces using 3M Detail Wax or 3M Perfect-ItShow Car Paste Wax or 3M Performance Finish for best results:Step 1. Apply a thin, uniform coating of wax or 3M Performance
Finish. Allow Detail Wax or Paste Wax to dry to a haze.Step 2. Remove wax residue using a soft, cotton terry cloth towel.Step 3. Detail using a 3M Perfect-It Detailing Cloth.
Dress the tires using 3M Tire Dressing or 3M Silicone Free TireDressing. Apply a thin, uniform coating to a clean, dry tire using asprayer or applicator pad. The level of gloss can be controlled by thethickness of of the coating.DO NOT USE 3M Tire Dressing or 3M Silicone Free Tire
Dressing on motorcycles, bicycles, or other two-wheeled vehicles
tires or seats. Avoid spraying onto brake rotors, brake drums or
brake pedals.
PO
LISHING,BUFFING,WAXING
&EXTERIORDRESSING
3.
2.
3M Silicone FreeTire Dressing
3M Tire Dressing
Note: Allow 3M Silicone FreeTire Dressing to completely drybefore driving vehicle as sling(particularly from newer tires)may stain painted surfaces.
3M PERFORMANCE FINISH FOR
BEST RESULTS
DIRECTIONS FOR USE
Do not apply in direct sunlight or
onto a hot surface. Wash and dryvehicle using 3M CarWash Soap (PN 39000).If paint is dull or oxidizeduse 3M One StepCleaner Wax (PN 39006)after washing the vehicle,but prior to using 3MPerformance Finish.
HAND
Step 1. Gently apply a thin, uniformfilm to the paint surface using a terry
cloth wax applicator or a clean, soft,folded cotton terry cloth towel.Step 2. Remove residue and buff to ahigh gloss using a 3M MicrofiberDetail Cloth (PN 39016) or a clean,soft, cotton terry cloth towel.Step 3. Complete method one panelat a time.
MACHINE
Step 1. Apply a thin, uniform film tothe paint surface using a randomorbital polisher equipped with a clean,
soft, terry cloth bonnet or DAequipped with a soft foam pad.Step 2. Buff to a high gloss with apolisher equipped with a clean, dry,terry cloth bonnet or by hand using a3M Microfiber Detail Cloth(PN 39016) or a clean, soft, cottonterry cloth towel.Step 3. Complete method one panelat a time.
8/10/2019 Detailing Manual
13/5212
3M Automotive Reconditioning GuideINTERIOR CLEANING
Clean the interior vinyl, plastic, leather, and rubber surfaces using 3M All Purpose Cleaner and Degreaser, dilutedat 1:30 (1 part concentrate plus 30 parts water) and a towel or brush. Dry the surface using a clean, dry terry clothtowel. Use an air blower with the towel for hard to reach places.Note: For cleaning heavily soiled vinyl or leather upholstery, use 3M All Purpose Cleaner and Degreaser, diluted at 1:15(1 part concentrate plus 15 parts water).
Thoroughly clean the vehicles carpet and upholstery using an extraction machine with 3M All Purpose Cleaner andDegreaser diluted at 1:100).2.
1.
8/10/2019 Detailing Manual
14/5213
3M Automotive Reconditioning Guide
INTERIOR CLEANING(CONTINUED)
Dress the vehicles interior vinyl, plastic, leather, and rubber components using 3M Interior Dressing. Apply enoughdressing to achieve a uniform wet appearance. Wipe off excess dressing using a clean, soft, dry terry cloth towel.Note: - For a lower gloss, dilute 3M Interior Dressing 1:1 with water (1 part concentrate plus 1 part water).
- For a higher gloss, use 3M Engine and Tire Dressing undiluted.
Clean the vehicles windows using 3M Premium Glass Cleaner diluted at 1:14 (1 part concentrate plus 14 partswater) and a clean, soft, dry cotton terry cloth towel.CAUTION: DO NOT USE UNDILUTED 3M GLASS CLEANER ON INTERIOR VEHICLE SURFACES.THE
CONCENTRATED PRODUCT WILL STAIN VINYL AND LEATHER, AND MAY STAIN OTHER SURFACES.
Note: - In hot, humid weather conditions spray and clean one window at a time- Use 3M Glass Cleaner concentrate undiluted for removing tree sap from exterior windows.
Thoroughly inspect the vehicle exterior. Use a 3M Perfect-It Detailing Cloth and/or 3M Perfect-It GlossEnhancer for final detailing.
INTERIORCLEANING
4.
5.
3.
8/10/2019 Detailing Manual
15/5214
3M Customer Pre-Delivery
Detailing Checklist
Pre-Delivery Cleaning and Final Inspection: Responsibility:
Inspect the vehicle ______________
Adhesive residue, tree sap, bug spatters
Leaves, debris in jambs and cowlings
Loose or missing caps, tighten or replace
Remove all trash from interior including trunk, ashtray, and seat folds
Note stains or heavily soiled carpet or upholstery
Pre-spot and brush stained or heavily soiled areas ______________
Clean wheels and wheel wells ______________
Clean engine ______________
Removed tar and/or adhesive residue ______________
Wash vehicle ______________
Clay vehicle if needed ______________
Removed tree sap if needed ______________
Buff and wax vehicle ______________
Compound removal from jambs, moldings, etc. ______________
Dress tires ______________
Interior cleaning:
Removed all items from interior ______________
Vacuum all surfaces ______________
Presoak carpet and upholstery stains ______________
Scrub stained areas with brush ______________
Finish cleaning carpet and upholstery ______________
Clean all interior surfaces, vinyl, leather ______________
Dress all interior surfaces ______________
Clean interior and exterior glass ______________
Replaced all items in vehicle ______________
Final exterior inspection ______________
8/10/2019 Detailing Manual
16/5215
BODYS
HOPCLEAN
UPSYSTEM
3M Body Shop Clean-Up
SYSTEM GUIDE
Inspect vehicle
Pre-Spot heavily soiled interior spots with APC
Apply HD Wheel Cleaner (Do not use on glass, engines, anodized wheels and/or
wheels with no coating or with coating cracked or in poor condition.)
- 3M Heavy Duty Wheel Cleaner (PN 38374/38375)
Apply APC & Degreaser to engine compartment, wheels, tires, jams, etc...
- 3M All-Purpose Cleaner & Degreaser (PN 38350/38351/38052)
Brush tires/wheels as needed
Rinse APC & Degreaser
Remove tape or adhesive residue with GPAC or Adhesive Remover
- 3M General Purpose Adhesive Cleaner (PN 08984/08986/08987)
- 3M Adhesive Remover (PN 38080/38081/38082)
Pre-soak bugs and/or compound residue with APC & Degreaser
- 3M All-Purpose Cleaner & Degreaser (PN 38350/38351/38052)
1.
2.
3.
4.
5.
6.
7.
8.
STEP 2
STEP 3
STEP 7
STEP 8
STEP 4
STEP 2
STEP 3
STEP 7
STEP 8
STEP 4
8/10/2019 Detailing Manual
17/5216
Wash total vehicle with Car Wash Soap
- 3M Car Wash Soap (PN 38377/38378/38079)
Clay paint overspray as required
Rinse and dry
Remove tree sap from glass with undiluted Glass Cleaner as required
- 3M Glass Cleaner (PN 38399/38300/38101)
Apply Final Glaze to fresh painted areas
- 3M Perfect-It 3000 Final Glaze (PN 06067/06066)
Dress tires with Silicone-Free Tire Dressing
- 3M Silicone-Free Tire Dressing (PN 38327/38328)
Clean interior with APC & Degreaser
- 3M All-Purpose Cleaner & Degreaser
(PN 38350/38351/38052)
Clean interior and exterior windows with Glass Cleaner
- 3M Glass Cleaner (PN 38399/38300/38101)
Wipe vehicle with Detail Cloth and inspect
- 3M Detail Cloth (PN 06016/06017/06018)
Attach mirror hang tag with shop business card
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
STEP 9
STEP 10
STEP 14
STEP 16
STEP 15
STEP 9
STEP 10
STEP 14
STEP 16
STEP 15
8/10/2019 Detailing Manual
18/5217
Paint Finishing Dos & Donts
Removes defects such as deep scratches, dust nibs orexcessive orange peel
Dry sand with Dual Action Sander, foam interface padrecommended for contours OR wet sand by hand
Caution: Sanding through clear coat will require repainting
Follow with Scratch Refinement Step and/orCompounding Step
1. Sanding Step 4. Polishing Step
Removes swirls, fine scratches and very mild stains For Dark Colors use finer polish and finer foam pads
For Lighter Colors use more aggressive polish and foam pads
Note: Swirls and imperfections remaining after this stepwill reoccur after waxing step products wash or wear off
Follow with Waxing Step
5. Waxing Step
Waxing fills swirls, very minor scratches and imperfectionsby leaving a thin layer of wax protection
Wax does little to further refine paint after the polishingstep. After wax is washed or worn away, the imperfec-tions remaining after polishing will reappear
Apply a thin even coat
Apply by hand on a damp pad
Apply with a Dual Action Sander using:05729 3M Perfect-it Foam Polishing D/A Pad - 6 in.
05739 3M Perfect-it Hookit II Foam D/A Glazing Pad
05732 3M Perfect-it Hookit II DA FoamApplication Pad - 6 in.
Removes imperfections, such as car wash scratches,medium to coarse scratches, medium oxidation and stains
Use wool pad for faster and more aggressive cutting
Use foam pad for slower and finer cutting
Follow with Polishing Step
3. Compounding Step
Damp sand with 3M Trizact disc on Dual Action Sander
Use foam interface pad for contours
Produces Semi-polished finish
Follow with Compounding Step
2. Scratch Refinement Step
ORDRY WET
PAINTFINIS
HINGDOSANDDONTS
8/10/2019 Detailing Manual
19/5218
Hiding vs. RemovingPaint Defects
While polishing and waxing a vehicle, you may havenoticed that some fine scratches became less visible oreven disappeared, only to reappear after the vehicle hasbeen washed a few times. By using the correct system ofproducts and procedures, many small paint defects canbe removed and will not reappear when the polish andwax are washed and worn away.
To remove a defect from the paint surface, you mustremove the very thin layer of paint that contains thedefect by spending enough time with a compound or polish.By removing this thin layer of paint, you actually removethe defect. See Illustration 1.
Some scratches, acid rain pits, or other more severedefects may not be able to be removed completely. If adefect goes too deep into the clear coat, sanding to thebottom of the defect may result in inadequate clear coat
thickness, or may even require a repaint. See Illustration 2.Generally speaking, if you can feel a scratch with yourfingernail, you should not attempt to remove it completely.However, even without sanding, many deep scratches orother more severe defects that are compounded, polishedand waxed will be less noticeable.
3M Perfect-It Foam Pads
Instructions for Use:
Recommended speed 1500 to 2000 R.P.M. Do notexceed 3000 R.P.M. Use only with 3M HookitSBS Backup Pad, PN 05717 or a 3M Perfect-ItBackup Pad, PN 05718.
To Install:
1. Center the compound pad on the backup pad.2. Press firmly and twist to insure good contact with
backup pad.
IMPORTANT:
Use caution around trim or moldings to avoid snaggingor tearing the pad. Keep the pad flat, or nearly flat,on surface being compounded.
To minimize the possibility of burning, reduce pressureover sharp convex/concave areas such as detail lines,fenders, etc. and keep surface wet with compound.
3M Foam Pad Care and Cleaning Instructions:
If pad becomes clogged, remove and install a cleanpad. Clean clogged pad as follows:
1. Rinse in warm (up to 115F) water.2. Set wet pad face up on a flat surface and allow
to dry.IMPORTANT:
Rinse under water faucet. Do not use soap or cleaningsolvents. Do not machine wash or dry. Do not cleanpads with a buffing spur or screwdriver.
3M Superbuff III Buffing Pad
(double-sided wool pad)
CAUTION:
3M Superbuff III Buffing Pad can spin off air-drivenpolishers due to tools rapid stop. To avoid spin off,firmly tighten buff onto adapter. Use 7/8 in. wrenchto hold adapter while tightening buff.
Buffing Pad Care and Cleaning Instructions:
Periodically rake pad with buffing spur or air nozzleto remove excess rubbing compound or glaze. If padbecomes clogged, remove, turn over, reinstall andcontinue buffing, allowing used side to dry. Washingpad causes shrinkage of wool fibers. If washing isdesired, use only cool (6080 F) water. Do not usehot water, strong detergents or solvents. Use washingmachines with gentle agitation only. Machine dryingis not recommended.3M Perfect-It
Foam Pad
CORRECT
3M Perfect-ItFoam Pad
INCORRECT
3M SuperbuffBuffing Pad
CORRECT
3M SuperbuffBuffing Pad
INCORRECT
8/10/2019 Detailing Manual
20/52
PAINTREPAIRPROCEDURE
19
New or Like New
Swirls and Very
Fine Scratches
Heavy Swirls
Fine Scratches
Mild Stains
Light Oxidation
Coarse Scratches
Heavy Oxidation
Deep ScratchesExcessive Overspray
Very Deep Scratches
Virtually no imperfections
Scratches / Swirls / Imperfections
Visible only in sunlight
Imperfections that can be seen in
shade or fluorescent lighting, but
appear as swirls in sunlight. This
procedure is usually done on light
to medium colored cars only.
Imperfections easily seen in all
lighting. Can usually be seen from
some distance.
Scratches plainly seen may have
a white look. May be felt with a
fingernail, but only very slightly.
Scratches felt with a fingernail.BE CAREFUL!Abrasive removal of toomuch clear coat or sanding into basecolor coat may require repainting.
Paint Condition DiagnosisSanding & Scratch
Refinement
Medium Scratches
Car Wash Scratches
Heavy StainsMedium Oxidation
Imperfections easily seen in shade
or fluorescent lighting. Scratches
can usually be seen separate fromswirls in sunlight.
TIP: When in doubt, use finer system first andthen use more aggressive system as required
TIP: Buffing pads in compounding step arelisted most aggressive to finer finishing
1
3M Hookit IIFinishing Film Discs-or-
3M ImperialWetordry PaperSheets
3M TrizactHookit II Foam Discs
2 1
02075
02021
00850
PAINTREPAIRPROCEDURE
8/10/2019 Detailing Manual
21/5220
Repair Procedure
Compounding Polishing Waxing
Use Disc Pad PN 05251 (on DA Sander) and OptionalInterface Pad PN 05274 or by hand with Pad PN 05291
2 Use 3M No.20 Sponge Pad PN 055263 Use with Superbuff Adapter PN 05710 and PN 05718
4 For Dual Action Sander Application use Pad PN 05251 and Pad PN 05739 or PN 057325 Use with PN 05718 or PN 05717
5 5
5
5
53
3M Detail Compound #308
-and-
3M Perfect-It III Compounding Pad
-or-
3M Superbuff III Buffing Pad
-or-
3M Superbuff III 2 Plus 2
Buffing Pad
-or-
3M Perfect-It Foam Compounding Pad- 8 in.
3M Detail Compound #308
-and-
3M Perfect-It III Compounding Pad
-or-3M Superbuff III Buffing Pad
-or-
3M Superbuff III 2 Plus 2
Buffing Pad
-or-
3M Perfect-It Foam Compounding Pad- 8 in.
3M Perfect-It II Rubbing Compound-and-
3M Perfect-It IIICompounding Pad-or-
3M Superbuff IIIBuffing Pad-or-
3M Superbuff III 2 Plus 2Buffing Pad
3M Detail Compound #308-and-
3M Perfect-It IIICompounding Pad-or-
3M Superbuff IIIBuffing Pad-or-
3M Superbuff III2 Plus 2 Buffing Pad-or-
3M Perfect-ItFoamCompoundingPad- 8 in.
3M Detail Polish #208-and-
3M Perfect-It FoamCompounding Pad- 8 in.
3M Detail Polish #108-and-
3M Perfect-It FoamPolishing Pad-or-
3M Perfect-It 3000Ultrafina SE-and-
3M Perfect-It UltrafinaFoam Polishing Pad
05719057030570405723
0571905703
05719057030570405723
38105
057190570305704
05973
381050572505751
3813306068
3M Detail Wax-or-
3M Perfect-It ShowCar Paste Wax-or-
3M PerformanceFinish-and-
3M Perfect-ItIII Detailing Cloths
060160601739526
3811138112
3M Detail Wax-or-
3M Perfect-It Show
Car Paste Wax-or-3M PerformanceFinish-and-
3M Perfect-ItIII Detailing Cloths
060160601739526
3811138112
3M Detail Wax-or-
3M Perfect-It ShowCar Paste Wax-or-
3M PerformanceFinish-and-
3M Perfect-ItIII Detailing Cloths
060160601739526
3811138112
3M Detail Wax-or-
3M Perfect-It ShowCar Paste Wax-or-
3M Performance Finish-and-
3M Perfect-It III
Detailing Cloths
060160601739526
3811138112
3M Detail Wax-or-
3M Perfect-It ShowCar Paste Wax-or-
3M Performance Finish-and-
3M Perfect-It IIIDetailing Cloths
06016
0601739526
38111
38112
3M Detail Wax-or-
3M Perfect-It ShowCar Paste Wax-or-
3M PerformanceFinish-and-
3M Perfect-ItIII Detailing Cloths
060160601739526
3811138112
4 4
4 4
4 4
4 4
4 4
4 4
4 4
3M Detail Wax-or-
3M Perfect-It ShowCar Paste Wax-or-
3M PerformanceFinish-and-
3M Perfect-ItIII Detailing Cloths
06016060173952638111
38112
5
3M Detail Polish #108-and-
3M Perfect-It Foam
Polishing Pad-or-
3M Perfect-It 3000Ultrafina SE-and-
3M Perfect-It UltrafinaFoam Polishing Pad
0572505751
3813306068
5
3M Detail Polish #108-and-
3M Perfect-It FoamPolishing Pad-or-
3M Perfect-It 3000Ultrafina SE-and-
3M Perfect-It UltrafinaFoam Polishing Pad
0572505751
3813306068
5
3M Detail Polish #108-and-
3M Perfect-It FoamPolishing Pad-or-
3M Perfect-It 3000Ultrafina SE-and-
3M Perfect-It UltrafinaFoam Polishing Pad
0572505751
3813306068
5
05723 38116
5
3M Detail Polish #108-and-
3M Perfect-It FoamPolishing Pad-or-
3M Perfect-It 3000Ultrafina SE-and-
3M Perfect-ItUltrafina FoamPolishing Pad
0572505751
3813306068
5
057040572338105
3
3
3
8/10/2019 Detailing Manual
22/5221
Product Dilution Ratios Explained
Mix water-based chemicals with water to make ready-to-use products.
Why
- Safer for workers- Save money buying concentrates
- Ratios pre-set to match the job- Better for the environment
Dilution examples
- 1:3 or one-to-three = 1 part concentrate + 3 parts water = 4 gallons of useable product
- 1:15 or one-to-fifteen = 1 part concentrate + 15 parts water = 16 gallons of useable product
Cost per gallon example
- 1:4 = 1 part concentrate ($5.00) + 4 parts water ($0.00) = $5.00 for 5 gallons or $1.00 per useable gallon
3M dilution suggestions
See below
DILUTIONRATIOS
Label Mix Diluter Pre-mix Shop Mix
SPRAY BOTTLE AUTOMATIC DILUTER BULK CONCENTRATE
8/10/2019 Detailing Manual
23/5222
3M Detailing Product Diluter
INSTALLATION & USE INSTRUCTIONS
Read and understand all safety information before using this product.
Intended Use
The 3M Detailing Product Diluter is intended to be used to dilute and dispense selected water based 3M DetailingProducts. The diluter is designed to operate on typical city water supply pressures.
Safety Information
WARNING
Before handling or using detailing chemicals, be sure toread the Material Safety Data Sheet (MSDS) for healthhazard data, precautionary information, and suggested
first aid.
WARNING
Fire hazard.
Window Cleaner concentrate solution is flammable.
Keep away from open flame; no smoking nearby.
CAUTION
Eye irritation -- wear eye protection when dispensingsolutions and when replacing concentrate bottle solutions.
Skin irritation -- wear rubber gloves when dispensingsolutions and when replacing concentrate bottle solutions.
CAUTION
Eye hazard. Flying particles and dust.Wear safety glasses with side shields
when drilling or hammering.
Miscellaneous Diluter and Accessory Parts
Available from Shopware Inc.
Phone # 1-800-877-9344
Fax # 952-392-2018 for order form Other accessories parts/service available
Shopware part numbers below
Pay via Visa, MasterCard or American Express
Part Number Description
PD100 Diluter tip kit (5 kits with 14 sizes)
PD101 Viton foot valve (blue color 5/kit)
PD102 In-line check valve (blue color 3/kit)
PD103 Pickup tube kit (1 tube, 3 weights, 3Viton foot valve)
PD104 Diluter (PN 37711) selector switchPD105 Glass cleaner foot valve (gray color 5/kit)
PD106 Rieke Spout Spigot (for 5 gallon round and
one gallon plastic 2/kit)
PD107 Male NPT Spigot (for 5 gallon cubes 2/kit)
PD108 Utility funnel (16oz. 3/kit)
PD109 Glass Cleaner in-line valve (gray color 3/kit)
PD110 5-Shelf Stack Rack (for 5-gallon cubes;
black color) Price includes shippingand handling.
PD111 Conversion kit (PN 37712) to Glass Cleaner
Viton is a registered trademark of Dupont Dow ElastomersL.L.C. Corporation.
8/10/2019 Detailing Manual
24/5223
3M Detailing Product Diluter
INSTALLATION & USE INSTRUCTIONS(CONTINUED)
Installing the Diluter
1. Open the carton and check contents.- The carton contains the diluter control console with attached concentrate supply tubes and dispenser tubes.- Also, there is a small bag that contains one spare bottle cap, mounting screws, and wall anchors.
2. Remove the front cover from the control console.- Press in on the tabs on both sides of the control console and simultaneously lift the front panel off.
3. Mark the location of 3 mounting screws on the wall.- Position the back plate of the control console against the wall at the desired location. (You may use a level to make sure
the control console is straight, but this is not critical to operation.)
- Mark the location of the mounting screws with a pen or pencil. There are two keyholes at the top of the plate and a slothole near the bottom, left side.
4. Drill holes for screws.- Use a 5/16 drill bit to make holes for the 3 wall anchors. You may need to use a masonry drill bit for some types of wall.
5. Insert wall anchors.- Hammer the anchors flush to the wall.
6. Insert top two screws- Screw in the top two screws, but leave the heads out about 1/4 from the wall.- Do not install the third screw yet.
7. Secure the backplate to the wall- Do not over tighten the screws.
- Place the console backplate on the wall. The keyholes at the top should fit over the two screw heads in the wall and slipdown into the keyhole notches.
- Install the bottom screw and then tighten all three screws.
8. Attach the water supply.- Thread the end of a standard garden hose to the connector on the right side of the control console (as you face the unit).
- Note: The cap on the connector on the left side (as you face the unit) should normally remain in place.
9. Snap the front cover into place.
- Press in on the two side tabs while pushing the cover on until it snaps into place.
10. Arrange concentrate containers below diluter so hoses are neatly arranged.
- Each supply tube has a label on it to identify the concentrate product it supplies.- Insert each concentrate supply tube into its correct concentrate container and fasten the lid.
CAUTION
Eye hazard.
Flying particles and dust.Wear safety glasses with side shields when drilling or hammering.
IMPORTANTInspect to be sure the tubes are attached securely.The tube for
supplying glass cleaner concentrate to the diluter is a special tube andmust be used for the glass cleaner concentrate. Do not switch tubes.
DILUTERUSAGE
8/10/2019 Detailing Manual
25/5224
Using the Diluter
Dispense Heavy Duty Wheel Cleaner:
- Place a correctly labeled detailing spray bottle onto the corresponding product tube coming out the bottom of thediluter console.
- Press and hold correct button until bottle is filled.
Dispense Glass Cleaner or All Purpose Cleaner & Degreaser:
- Place a correctly labeled detailing spray bottle onto the corresponding product tube coming out the bottom of thediluter console.
- Press and hold correct button until bottle is filled.
Dispense Car Wash Soap:- The long tube on the right bottom of the console is for dispensing soap into a bucket on the floor.
Place the end of the tube in a bucket.- Press and hold the right button, labeled Car Wash Soap, until youve dispensed the amount you want.
IMPORTANT
Make sure the supply tubes are inserted into their correctconcentrate product containers.
The chart above shows the dilution ratios of water to various 3M detailing products. The eductor, labeled at the top,can be brown, grey, or yellow. The eductor is the part in the assembly that the hoses attach to. Find your educ-
tor color and look below it to find the product you are using. In the column below your product, you willsee various dilution ratios. Find your ratio and follow it left to determine which dilution tip color youwill use. Example: Brown eductor with a black dilution tip has a dilution ratio of 1:2 of 3M
Heavy Duty Wheel Cleaner to water.
Depending on your hose fitting size you may have a snap tip or a threaded tip. If you
are using a threaded dilution tip, it is important that you screw hand tight plus a1/4 turn. If you are using a snap dilution tip, fully insert it into the barbed
fitting (be sure not to squeeze the tip).
**Requires 3M Diluter Conversion Kit for Glass Cleaner(PD111) (Shopware 1-800-877-9344)
8/10/2019 Detailing Manual
26/5225
3M Detailing Product Diluter
TROUBLESHOOTING GUIDE
DILUTERUSAGE
Excessive foam in 3M Heavy Duty Wheel Cleaner (whenfilling, bottle is more than 1/2 full of foam)
Tighten the fitting where the 3M Heavy Duty WheelCleaner suction hose meets the diluter
3M Car Wash Soap not sudsy enoughReplace yellow orifice tip with brown, orange or greenorifice tip
No siphon on select product(s)Ensure all fittings are very tight and secure.Replace foot valveon the end of the hose.Ensure adequate water pressure
Water leaks where garden hose attaches to diluter Ensure rubber washer is inside fitting. Tighten the fitting
Water leaks where gray water hose fitting meets whitevalve housing
Unscrew gray fitting, reapply thread sealer/tape, screwfitting back in
After use, suction hose drains down or loses primeReplace foot valve on the end of the hose. Note: Use grayfoot valve for 3M Glass Cleaner and a blue foot valve for
all other products.
While in use, water spits out from gray or yellow eductor
Mineral deposits inside eductor misdirecting water flow;
remove eductor and soak/clean with lime-away typeproduct and reinstall.**
After usage, solid crystals develop in 3M Glass Cleanersupply hose
Remove supply hose, clean out crystals, and reinstall or
replace selector switch or install separate 3M SingleProduct Diluter PN 37712 with Glass Cleaner ConversionKit PD111 (Available from Shopware 1-800-877-9344)
After usage, residue builds up around and inside selectorswitch causing difficult operation or reduced suction*
Replace selector switch or disassemble and clean selectorswitch with water. Note: Pay attention to how the switchcomes apart for exact re-assembly
PROBLEM: SOLUTION:
8/10/2019 Detailing Manual
27/5226
No discharge
a. Open water supply.
b. Install valve parts kit.c. Install regulator if water pressure exceeds 60 PSI (flowing).
d. Clean** or replace.
No concentrate draw
a. Clean or replace.
b. Clean (descale)** or replace.
c. Minimum 20 PSI (with water running) required to operate
unit properly.
d. Push tube firmly onto eductor discharge hose barb; besure inner discharge tube is installed and has flooding ring.
e. Replace with full container.
f. Tighten, but do not overtighten.
g. Disconnect inlet water line and clean strainer.
Excess concentrate drawa. Press correct tip firmly into barb on eductor.
b. Place concentrate below the eductor.
Failure of unit to turn off
a. Clean** or replace with valve parts kit.
b. Make sure magnet moves freely.
c. Remove button and clean cabinet/button to remove any
dirt lodged in slide recess
Excess foaming in dischargea. Put clamp on tube or replace tube if brittle.
b. Install inner discharge tube.
Water discharge from air vents on eductor
a. Be sure discharge tube is not immersed, kinked orelevated. Be sure there is no liquid in the discharge tube
when beginning to operate dispenser.
b. Install pressure regulator if flowing water pressureexceeds 60 PSI (flowing).
PROBLEM: SOLUTION:
* Applies only to old model with selection switch (37711)
** In hard water areas, scale may form inside the discharge end of the eductor, as well as in other areas of the unit that are
exposed to water. This scale may be removed by soaking the eductor in a descaling solution (deliming solution). Toremove an eductor located in the cabinet, firmly grasp water valve and unthread eductor. Replace in same manner.
Alternatively, a scaled eductor can be cleaned (or kept from scaling) by drawing the descaling solution through the unit.Operate the unit with the suction tube in the descaling solution. Operate the unit until solution is drawn consistently, then
flush the unit by drawing clear water through it for a minute. Replace concentrate container and put suction tubeinto concentrate.
8/10/2019 Detailing Manual
28/5227
3M Heavy Duty Wheel CleanerPRODUCTINFORMATION
A water based cleaner concentrate for removing brake dust from
vehicle wheels. Does not contain hydrofluoric or other strong acids.
- PN 38374 (38074)* 1 gallon bottle
- PN 38375 (38075)* 5 gallon pail- PN 38076 55 gallon drum
3M Heavy Duty Wheel Cleaner is a cleaner concentrate designed
to remove tough brake dust deposits from wheels.
Directions for Use:
1. Add 1 part cleaner concentrate to 2 parts water.
2. Apply 3M Heavy Duty Wheel Cleaner to vehicle wheels andlet stand for about 2 minutes.
Note: 3M Heavy Duty Wheel Cleaner works best whenapplied to a dry wheel.
3. Apply 3M All Purpose Cleaner and Degreaser (1:15 dilution)to the tires and wheels. Let stand for approximately
one minute.*
4. Rinse thoroughly, using a high-pressure washer.5. For particularly stubborn brake dust deposits, use 3M Heavy Duty Wheel Cleaner undiluted.
*Note: 3M Heavy Duty Wheel Cleaner works best for removing brake dust, while 3M All Purpose Cleaner and
Degreaser works best for cleaning tires and removing other difficult soils from wheels.DO NOT use 3M Heavy Duty Wheel Cleaner on glass, engines, anodized wheels and/or wheels with no
coating or with coating cracked or in poor condition. Glass that is stained by the 3M Heavy Duty Wheel
Cleaner can not be repaired and will need to be replaced.
Note: 3M Heavy Duty Wheel Cleaner does not contain hydrofluoric or other strong acids.
Tips:
- For heavy brake dust deposits agitation with a brush greatly enhances cleaning effectiveness.- Light agitation on some chrome wheels greatly enhances the final appearance.
- For removing water spots, apply 3M Heavy Duty Wheel Cleaner diluted at 1 part cleaner concentrate to 2 partswater to the vehicles painted surfaces, let stand two minutes but do not allow to dry, scrub using a terry cloth toweland rinse.
Product Safety and Health Information Source:Material Safety Data Sheet(MSDS 08-3012-5) or
3M Automotive Aftermarket Division3M Center, Bldg. 223-6N-01St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
* Part number to be discontinued
PAINTSHOPSAFE!
8/10/2019 Detailing Manual
29/5228
A water based cleaner/degreaser concentrate for exterior and interiorvehicle cleaning.
- PN 38350 (38050)* 1 gallon bottle
- PN 38351 (38051)* 5 gallon pail- PN 38052 55 gallon drum
3M All Purpose Cleaner and Degreaser is a heavy duty cleanerconcentrate designed for both interior and exterior vehicle cleaning
applications. 3M All Purpose Cleaner and Degreaser removes oil,
grease, and other tough soils from vehicle engines, tires, wheels, and otherheavily soiled exterior vehicle surfaces, and is very effective for removinginsect residue from the fronts of vehicles. 3M All Purpose Cleaner and
Degreaser also cleans and removes soils and most stains from carpet,fabric upholstery, vinyl, leather, and other interior vehicle surfaces.
Directions for Use:
DILUTION 1:15 (Add 1 cup concentrate to a gallon containerand fill with water.) Use for degreasing, tire and wheel cleaning,
insect residue removal, carpet and upholstery stain removal, andother heavy duty cleaning applications.
DILUTION 1:30 (Add 1/2 cup concentrate to a gallon container and fill with water.) Use for cleaning vinyl, leather,
plastic and other lightly soiled vehicle surfaces.
Degreasing/Insect Residue Removal: (1:15 dilution)1. Spray diluted cleaner onto heavily soiled areas engines, tires, wheels, insect residue, etc. Let stand about 2 minutes.2. Scrub/brush heavily soiled areas as needed.
3. Rinse thoroughly using a high pressure washer.
Carpet/Fabric Upholstery Cleaning (1:15 dilution)
1. Spray diluted cleaner directly onto the surface.
2. Work the surface using the appropriate sponge, cloth, or brush.3. Remove soil using an extraction unit.
Vinyl/Leather Light Duty Cleaning (1:30 dilution)
1. Spray the diluted cleaner directly onto the surface, or spray onto a terry cloth towel and apply.
2. Work the surface using the appropriate sponge, cloth, or brush.3. Remove soil using a clean, dry terry cloth towel.
Tips:- For maximum effectiveness do not allow degreaser to dry before rinsing.- For heavily soiled wheels; first apply 3M Heavy Duty Wheel Cleaner, soak two minutes, then apply
3M All Purpose Cleaner and Degreaser (1:15 dilution), soak one minute, scrub as needed and rinse.
Product Safety and Health Information Source:
Material Safety Data Sheet (MSDS 16-3418-7) or
3M Automotive Aftermarket Division3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000Telephone: 1-877-MMM-CARS (1-877-666-2277)
or (651) 737-6501
* Part number to be discontinued
3M All Purpose Cleaner and Degreaser
PAINTSHOPSAFE!
8/10/2019 Detailing Manual
30/5229
PRODUCTINFORMATION
3M Glass Cleaner
A solvent based water dilutable cleaner concentrate.
- PN 38399 (38099)* 1 gallon can- PN 38300 (38100)* 5 gallon pail- PN 38101 55 gallon drum
(special order)
3M Glass Cleaner is a concentrated cleaner that quickly andeffectively removes smoke films, fingerprints and other soils from
windows and plastic surfaces, and may also be used to assist in theremoval of window stickers and adhesive residue. 3M GlassCleaner does not contain ammonia and will not leave a filmy residue.
Directions for Use:
CAUTION: DO NOT USE UNDILUTED 3M GLASS CLEANER
ON INTERIOR VEHICLE SURFACES. THE CONCENTRATED
PRODUCT WILL STAIN VINYL AND LEATHER, AND MAY STAIN
OTHER SURFACES.
CAUTION: DO NOT USE 3M GLASS CLEANER ON FRESHLY
PAINTED SURFACES.
1. Add 1 part concentrate to 14 parts water (add 1 cup to 1 gallon of water).
2. Spray onto the glass or plastic surface and rub thoroughly using a clean, soft, dry cotton terry cloth towel.3. Remove the final material with a clean, soft, dry terry cloth towel.
Tips:
- To ensure optimum performance, always use fluorinated 3M Detailing Spray Bottles with 3M Glass Cleaner.- In hot, humid weather conditions spray one window at a time and wipe immediately.
- Use 3M Glass Cleaner concentrate undiluted for removing tree sap from exterior windows.
Product Safety and Health Information Source:
Material Safety Data Sheet(MSDS 08-2999-4) or
3M Automotive Aftermarket Division3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
* Part number to be discontinued
PAINTSHOPSAFE!
8/10/2019 Detailing Manual
31/5230
3M Premium Glass Cleaner
A solvent based water dilutable cleaner concentrate.
Excellent for high humidity conditions.
- PN 38221 1 gallon can
- PN 38222 5 gallon pail
Directions for Use:
CAUTION: DO NOT USE UNDILUTED 3M GLASS CLEANER
ON INTERIOR VEHICLE SURFACES.THE CONCENTRATED PRODUCT WILL STAIN VINYL AND
LEATHER, AND MAY STAIN OTHER SURFACES.
CAUTION: DO NOT USE 3M GLASS CLEANER ON FRESHLY
PAINTED SURFACES.
1. Add 1 part concentrate to 14 parts water (add 1 cup to 1 gal-
lon of water).
2. Spray onto the glass or plastic surface and rub thoroughly
using a clean, soft, dry cotton terry cloth towel.
3. Remove the final material with a clean, soft, dry terry cloth
towel.
Tips:
- To ensure optimum performance, always use fluorinated 3M Detailing Spray Bottles with 3M Glass Cleaner.- In hot, humid weather conditions spray one window at a time and wipe immediately.
- Use 3M Glass Cleaner concentrate undiluted for removing tree sap from exterior windows.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 08-2999-4) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
PAINTSHOPSAFE!
8/10/2019 Detailing Manual
32/5231
3M Car Wash Soap
A highly concentrated water based soap.
- PN 38377 (38077)* 1 gallon bottle
- PN 38378 (38078)* 5 gallon pail
- PN 38079 55 gallon drum
3M Car Wash Soap is a highly concentrated liquid soap which
develops heavy-bodied, long-lasting suds and quickly removes dirt
and road film from exterior automotive surfaces.
Directions for Use:
1. Add 1 part soap concentrate to 100 parts water in a clean
bucket (about 2/3 cup in five gallons water).
2. Rinse the vehicle thoroughly to remove any grit that could
scratch the paint surface.
3. Wash the vehicle using a clean, soft, sponge, towel or
wash mitt.
4. Rinse thoroughly and dry using a clean, soft, cotton terry
cloth towel or chamois.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 08-3014-1) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
* Part number to be discontinued
PAINTSHOPSAFE!
8/10/2019 Detailing Manual
33/5232
A solvent based product that quickly removes adhesive residue.
- PN 38080 1 gallon can
- PN 38081 5 gallon pail
- PN 38082 55 gallon drum
3M Adhesive Remover is a ready-to-use blend of petroleum sol-
vents designed to remove adhesive deposits from exterior vehicle
surfaces. To minimize the possibility of staining, do not apply in
direct sunlight or onto a hot surface.
Directions for Use:
1. Soak cloth with 3M Adhesive Remover and apply onto
the surface.
2. Rub thoroughly with a soft cloth and remove the excess
material with a clean, dry, soft cloth. Repeat as necessary.
3. For stubborn deposits, apply material, allow to soak for one
minute and scrub.
Tips:
- For difficult oil-based stains on fabric apply 3M Adhesive Remover, scrub, and clean using 3M All Purpose Cleaner
and Degreaser or 3M Multi-Purpose Cleaner.
- Use 3M Premium Glass Cleaner concentrate undiluted for removing tree sap from exterior windows.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 08-4315-1) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
*Not for sale in California. Suggested replacement: 3M General Purpose Adhesive Cleaner (PN 08984 or 08986 or 08987)
3M Adhesive Remover*
PAINTSHOPSAFE!
8/10/2019 Detailing Manual
34/5233
3M Interior DressingPRODUCTINFORMATION
A ready-to-use water based silicone dressing.
- PN 38086 1 gallon bottle
- PN 38087 5 gallon pail
3M Interior Dressing is a ready-to-use water-based silicone
emulsion designed to restore a natural gloss appearance to all vinyl,
leather, rubber and plastic interior vehicle surfaces.
Directions for Use:
1. Spray onto a clean, soft, cotton terry cloth towel and wipe onto
the surface, or spray directly onto the surface and wipe. Use
enough material to achieve a uniform appearance.
2. Wipe off excess material using a clean, soft, dry terry cloth
towel to achieve a natural look and feel.
Tips:
- For a lower gloss dilute 3M Interior Dressing 1:1 with water.
- For a higher gloss use 3M Engine and Tire Dressing undiluted.
Product Safety and Health Information Source:Material Safety Data Sheet
(MSDS 08-3134-7) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
8/10/2019 Detailing Manual
35/5234
Awater based silicone engine and tire dressing concentrate.
- PN 38124 1 gallon bottle
- PN 38125 5 gallon pail
- PN 38126 55 gallon drum
3M Engine and Tire Dressing is a water-based silicone emulsion
concentrate, designed to restore a deep black appearance on tires,
hoses and rubber moldings, and a clean new look on vinyl, plastic,
and other low gloss or flat painted surfaces.
Directions for Use:
1. For dressing engines, add 1 part concentrate to 1 part water;
or for dressing tires, apply concentrate.
2. Apply a uniform coating directly onto the surface and allow to
dry naturally.
Tips:
- For higher gloss, use 3M Engine Dressing undiluted.
- Great tire dressing where low VOCs are required.
- 3M Engine and Tire Dressing may be used undiluted as a tire dressing or an interior dressing:
1. Apply a uniform coating to the surface.
2. Remove excess using a terry cloth towel.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 08-6460-3) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
3M Engine and Tire Dressing
8/10/2019 Detailing Manual
36/5235
3M Tire Dressing
A solvent based ready-to-use silicone tire dressing.
- PN 38127 1 gallon can
- PN 38128 5 gallon pail
- PN 38129 55 gallon drum
3M Tire Dressing is a solvent based silicone dressing that
produces a deep black, glossy appearance on new and nearly new
tires, and a deep black, natural appearance on older tires.
Directions for Use:
1. Spray a thin, uniform coating onto a clean, dry tire. Wipe
lightly with a clean, soft, terry cloth towel and allow to dry.
2. Remove overspray from wheels, hubcaps, or painted surfaces
using a clean, soft dry terry cloth towel.
DO NOT USE on motorcycles, bicycles, or other two-wheeled
vehicles tires or seats. Avoid spraying onto brake rotors,
brake drums or brake pedals.
Tips:
- For a higher gloss appearance apply dressing and allow to dry without wiping.
- For lower VOC requirements use 3M Engine and Tire Dressing (see page 34.)
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 08-6461-1) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
P
RODUCTINFORMATION
8/10/2019 Detailing Manual
37/5236
A solvent based, ready-to-use silicone free tire dressing.
- PN 38327 (38227)* 1 gallon can
- PN 38328 (38228)* 5 gallon pail
3M Silicone Free Tire Dressing is a solvent based silicone free
dressing that produces a deep black, glossy appearance on new and
nearly new tires, and a deep black, natural appearance on older tires.
It is critical to follow the directions for use for 3M Silicone Free
Tire Dressing to avoid the possibility of paint staining.
Directions for Use:
Note: Sling from some, particularly newer, tires may
stain painted surfaces. To avoid staining, follow these
instructions carefully.
1. Clean tires thoroughly using 3M All Purpose Cleaner and
Degreaser 1:15 or stronger and scrub using a stiff bristle brush.
2. Thoroughly rinse the tires using a pressure washer and allow
to dry.
3. Apply a thin, uniform coating of 3M Silicone Free Tire Dressing using a trigger sprayer, sponge applicator, or rag.
Note: Use only a thin coating of dressing. A heavy coating may puddle around tire treads or raised lettering, and spatter
even after the dressing dries.
4. Remove excess dressing using an absorbent cloth.5. Allow dressing to dry completely before driving the vehicle.
DO NOT USE on motorcycles, bicycles, or other two-wheeled vehicles tires or seats.
Avoid spraying onto brake rotors, brake drums or brake pedals.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 16-2924-5) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277)
or (651) 737-6501* Part Number To Be Discontinued
3M Silicone Free Tire Dressing
PAINTSHOPSAFE!
8/10/2019 Detailing Manual
38/5237
3M Perfect-It III Cleaner Clay
A clay bar for removing overspray and environmental contaminates
from a vehicles exterior surfaces.
- PN 38070 200 gram bar
3M Perfect-It III Cleaner Clay is recommended for use in
removing contaminants such as rail dust, paint overspray, and
industrial fallout from exterior paint, glass, and metal surfaces.
Directions for Use:Do not use in direct sunlight or on a hot surface.
1. Wash and rinse vehicle thoroughly using 3M Car Wash Soap.
2. Check exterior surfaces for contaminants a rough or gritty feel.
3. Work contaminated areas with the clay using light pressure and 3M Car Wash Soap or 3M Perfect-It Gloss
Enhancer as a lubricant.
4. Rinse and dry surface.
5. Knead clay periodically to expose a new surface.
Tips:
- Use 3M Perfect-It III Cleaner Clay with 3M Car Wash Soap as a lubricant while washing the vehicle, or use 3M
Perfect-It III Cleaner Clay with 3M Perfect-It Gloss Enhancer (contains silicone) as a lubricant after the vehicle
has been washed.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 08-5407-5) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
PAINTSHOPSAFE!
P
RODUCTINFORMATION
8/10/2019 Detailing Manual
39/5238
A light cutting very fine finishing polish. Contains silicones.
- PN 38133 1 gallon bottle
3M Detail Polish 108 is a light cutting, very fine finishing polish
recommended for use to remove light oxidation, fine scratches and
stains, and leaves an excellent, high gloss finish on all types of
automotive paints. To minimize the possibility of staining, do not
apply in direct sunlight or onto a hot surface.
Note: Contains silicones. Not recommended for use in body shop or
paint shop applications.
Directions for Use:
Polish using an electric buffer (1000 to 2500 RPM) equipped with
a 3M Superbuff Polishing Pad or a 3M Perfect-It Foam
Polishing Pad.
1. Shake container before using.
2. Apply enough polish to the paint surface to work a 2 x 2
area. To minimize slinging, spread the polish over the surface
with the pad before starting the machine.
3. Start the machine and buff using light-to-medium pressure.
4. Reduce pressure as polish begins to dry, and buff to a high gloss. Clean pad as necessary to assist cleanup.
Tips:
Excellent for the first step of a 2-step buffing procedure.
Step 1 Use 3M Detail Compound 308 with a 3M Superbuff Compounding Pad to remove imperfections such as
heavy oxidation, car wash scratches or other coarse scratches.
Step 2 Use 3M Detail Polish 208 with a 3M Perfect-It Foam Polishing Pad to remove the compound swirl
marks and product the best finish.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 08-5425-7) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
3M Detail Polish 108
8/10/2019 Detailing Manual
40/5239
3M Detail Polish 208PRODUCTINFORMATION
A medium cutting fine finishing polish. Contains silicones.
- PN 38116 1 gallon bottle
3M Detail Polish 208 is a medium cutting, fine finishing polish
recommended for use to remove oxidation, scratches and stains,
and leaves a high gloss finish on all types of automotive paints. To
minimize the possibility of staining, do not apply in direct sunlight or
onto a hot surface.
Note: Contains silicones. Not recommended for use in body shop or
paint shop applications.
Directions for Use:
Polish using an electric buffer (1000 to 2500 RPM) equipped with
a 3M Superbuff Polishing Pad or a 3M Perfect-It Foam
Compounding Pad.
1. Shake container before using.
2. Apply enough polish to the paint surface to work a 2 x 2 area.
To minimize slinging, spread the polish over the surface with
the pad before starting the machine.
3. Start the machine and buff using light-to-medium pressure.
4. Reduce pressure as polish begins to dry, and buff to a high gloss. Clean pad as necessary to assist cleanup.
Tips:
Excellent for use with a 3M Perfect-It Foam Compounding Pad to remove light oxidation, fine scratches, and stains
and leaves a high gloss finish in a one step process.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 09-0268-4) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
8/10/2019 Detailing Manual
41/5240
A medium cutting fine finishing compound. Contains silicones.
- PN 38105 1 gallon bottle
3M Detail Compound 308 is a medium cutting, fine finishingcompound recommended for use to remove heavy oxidation, coarse
scratches and stains, and leaves a medium gloss, fine swirl markfinish on all types of automotive paints. To minimize the possibility of
staining, do not apply in direct sunlight or onto a hot surface.
Note: Contains silicones. Not recommended for use in body shop orpaint shop applications.
Directions for Use:
Compound using an electric buffer (1000 to 2500 RPM)
equipped with a 3M Superbuff Compounding Pad, or a3M Perfect-It Foam Compounding Pad.1. Shake container before using.
2. Apply enough compound to the paint surface to work a 2x2area. To minimize slinging, spread the compound over the
surface with the pad before starting the machine.3. Start the machine and buff using light to medium pressure.
4. Reduce pressure as the compound begins to dry. Clean pad as necessary to assist cleanup.
Tips:
Excellent for the first step of a 2-step buffing procedure.
Step 1 Use 3M Detail Compound 308 with a 3M Superbuff Compounding Pad to remove imperfections such asheavy oxidation, car wash scratches or other coarse scratches.
Step 2 Use 3M Detail Polish 208 with a 3M Perfect-It Foam Polishing Pad to remove the compound swirlmarks and product the best finish
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 09-6468-4) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
3M Detail Compound 308
8/10/2019 Detailing Manual
42/52
PRODUCTINFORMATION
A carnauba wax based durable liquid wax. Contains silicones.
- PN 38111 1 gallon
3M Detail Wax is an easy to use, durable automotive wax
recommended for use on new or like new paint finishes to producea deep, high gloss, lustrous finish. To minimize the possibility of
staining, do not apply in direct sunlight or onto a hot surface.
Note: Contains silicones. Not recommended for use in body shop orpaint shop applications.
Directions for Use:
1. Apply a thin, uniform coating of wax to the paint surface, either
by hand or with an orbital action tool equipped with a foam pad.Allow to dry to a haze.
2. Remove wax residue and buff to a high gloss using a soft,
cotton terry cloth towel.
Product Safety and Health Information Source:
Material Safety Data Sheet(MSDS 09-2788-9) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
3M Detail Wax
41
3M Perfect-It Gloss EnhancerA water based spray detailing product. Contains silicones.
- PN 38113 1 gallon bottle- PN 38114 5 gallon pail- PN 38115 55 gallon drum (special order)
3M Perfect-It Gloss Enhancer is a quick and easy, spray on /
wipe off product that can restore a just waxed look and feel. 3MPerfect-It Gloss Enhancer is also recommended for use as a spray
detailing product to assist in the removal of buffing residue, and as alubricant for claying a vehicle.
Note: Contains silicones. Not recommended for use in body shop or
paint shop applications.
Directions for Use:
Do not apply in direct sunlight or onto a hot surface.1. Shake well before using.2. Remove any grit that could scratch the paint surface.
3. Spray on and wipe off small areas one panel at a time.4. Remove any dried overspray with a damp cloth.
8/10/2019 Detailing Manual
43/5242
Tips:
- For a clay lubricant, use enough 3M Perfect-It Gloss Enhancer to completely wet the surface. After claying, wipeoff the residue before it dries.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 08-3020-8) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01St. Paul, MN 55144-1000Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
A reactive silicone paint protector. Contains silicones.
3M Performance Finish is a reactive silicone based product that
bonds to the paint surface providing a durable, longlasting and high gloss protective finish with exceptional waterbeading qualities. The application and removal characteristics make
this product extremely easy to use leaving a high gloss wet look fin-ish that is pleasing to the eye. Its more than a wax!
Note: Contains silicones. Not recommended for use in body shop orpaint shop applications.
Directions for Use:
1. Apply a thin, uniform film to the paint surface, using a terrycloth wax applicator or a clean, soft, folded, cotton, terry cloth
towel. Or use a random orbital polisher equipped with a clean,soft, terry cloth bonnet or DA equipped with soft
foam pad.2. Remove residue and buff to a high gloss using a 3M Microfiber Detail Cloth (PN 39016) or a clean,
soft, cotton terry cloth towel. Or, with a polisher equipped with a clean, dry, terry cloth bonnet.
3. Complete method one panel at a time.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 18-5336-5) or
3M Automotive Aftermarket Division3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000Telephone: 1-877-MMM-CARS (1-877-666-2277)
or (651) 737-6501
3M Performance Finish
- PN 38112 quart bottle
- PN 39030 pint bottle
3M Perfect-It Gloss Enhancer(CONTINUED)
8/10/2019 Detailing Manual
44/5243
DETAILINGFINALEXAM
Detailing Final Exam
3M Heavy Duty Wheel Cleaner will (may) cause damage on:
a. Uncoated wheels or coated wheels in poor conditionb. Glass
c. Enginesd. All of the Above
The two recommended dilution ratios for 3M All Purpose Cleaner & Degreaser are:a. 1:15 and 1:25b. 1:12 and 1:25
c. 1:15 and 1:30
d. 1:10 and 1:20e. 1:8 and 1:16
Which of the following is a concern or a potential problem when buffing with a foam pad?
a. Easy to useb. Runs hotterc. No lint
d. Minimal swirlse. None of the above
What product would you use to remove a coffee stain from a carpeted floor mat?a. 3M All Purpose Cleaner & Degreaser diluted 1:30
b. 3MAll Purpose Cleaner & Degreaser diluted 1:15c. 3M Heavy Duty Wheel Cleaner
d. 3M Gloss Enhancere. None of the above
What product would you recommend for removing hard water spots from a painted or plastic surface?
a. 3M Heavy Duty Wheel Cleaner diluted 1:2 (Do not use on glass, engines, anodized wheels and/or
wheels with no coating or with coating cracked or in poor condition.)
b. 3M All Purpose Cleaner & Degreaser diluted 1:15
c. 3M Heavy Duty Wheel Cleaner undiluted (Do not use on glass, engines, anodized wheels and/or wheelswith no coating or with coating cracked or in poor condition.)
d. 3M All Purpose Cleaner & Degreaser diluted 1:30e. None of the above
If a product is diluted 1:8 and costs $18 per gallon, what is the cost per diluted gallon?a. $2.25
b. $2.00c. $1.75d. $1.50
e. None of the above
1.
2.
3.
4.
5.
6.
8/10/2019 Detailing Manual
45/5244
If a product is diluted 1:15 and costs $24 per gallon, what is the cost per diluted gallon?
a. $2.25b. $2.00
c. $1.75d. $1.50e. None of the above
Silicones are not recommended for use in a body shop environment:
T
F
3M Detail Polish 108 cuts more than 3M Detail Compound 308:
T
F
The recommended product for removing tar from a painted surface is:
a. 3M Heavy Duty Wheel Cleaner diluted 1:2 (Do not use on glass, engines, anodized wheels and/or
wheels with no coating or with coating cracked or in poor condition.)
b. 3M All Purpose Cleaner & Degreaser diluted 1:15
c. 3M Heavy Duty Wheel Cleaner undiluted (Do not use on glass, engines, anodized wheels and/orwheels with no coating or with coating cracked or in poor condition.)
d. 3M All Purpose Cleaner & Degreaser diluted 1:30
e. None of the above
The recommended product for removing bug spatters is:a. 3M Heavy Duty Wheel Cleaner diluted 1:2 (Do not use on glass, engines, anodized wheels and/or
wheels with no coating or with coating cracked or in poor condition.)
b. 3M All Purpose Cleaner & Degreaser diluted 1:15
c. 3M Heavy Duty Wheel Cleaner undiluted (Do not use on glass, engines, anodized wheels and/orwheels with no coating or with coating cracked or in poor condition.)
d. 3M All Purpose Cleaner & Degreaser diluted 1:30
e. None of the above
When detailing a vehicle, it is recommended to begin washing it from the bottom because that is the dirtiest part:
T
F
The polishes and compounds can or may be used with wool pads: T
F
There is no difference between 3M Heavy Duty Wheel Cleaner and competitive wheel cleaners:
T
F
Trizact Abrasive Discs must always be used damp:
T
F
7.
8.
9.
10.
11.
12.
13.
14.
15.
ANSWERS:1.d2.c3.b4.b5.a6.b7.d
8.T9.F10.e11.b12.F13.T14.F15.T
8/10/2019 Detailing Manual
46/5245
Ordering Information
Exterior Cleaners
38350 | 3M All Purpose Cleaner & Degreaser (38050)* | Gallon | 4
38351 | 3M All Purpose Cleaner & Degreaser (38051)* | 5-Gallon Pail | 1
38052 | 3M All Purpose Cleaner & Degreaser | 55-Gallon Drum | 1
38070 | 3M Perfect-It III Cleaner Clay | 1 Jar | 638374 | 3M Heavy Duty Wheel Cleaner (38074)* | Gallon | 4
38375 | 3M Heavy Duty Wheel Cleaner (38075)* | 5-Gallon Pail | 1
38076 | 3M Heavy Duty Wheel Cleaner | 55-Gallon Drum | 1
38377 | 3M Car Wash Soap (38077)* | Gallon | 4
38378 | 3M Car Wash Soap (38078)* | 5-Gallon Pail | 1
38079 | 3M Car Wash Soap | 55-Gallon Drum | 1
Part | Product | Container | Cont.No. | Name | Size | Per Case
Exterior Cleaners (Solvents)
38080 | 3M Adhesive Remover | Gallon | 4
38081 | 3M Adhesive Remover | 5-Gallon Pail | 1
38082 | 3M Adhesive Remover | 55-Gallon Drum | 1
Part | Product | Container | Cont.
No. | Name | Size | Per Case
Exterior Dressings
38124 | 3M Engine and Tire Dressing | Gallon | 4
38125 | 3M Engine and Tire Dressing | 5-Gallon Pail | 1
38126 | 3M Engine and Tire Dressing | 55-Gallon Drum | 1
38127 | 3M Tire Dressing | Gallon | 4
38128 | 3M Tire Dressing | 5-Gallon Pail | 1
38129 | 3M Tire Dressing | 55-Gallon Drum | 1
38327 | 3M Silicone Free Tire Dressing (38227)* | Gallon | 4
38328 | 3M Silicone Free Tire Dressing (38228)* | 5-Gallon Pail | 1
Part | Product | Container | Cont.No. | Name | Size | Per Case
O
RDERINGINFORMATION
* Part number to be discontinued
8/10/2019 Detailing Manual
47/52
Interior Cleaners
Part | Product | Container | Cont.No. | Name | Size | Per Case
Waxes, Polishes & Compounds
Part | Product | Container | Cont.No. | Name | Size | Per Case
Detailing Accessories
37721 | 3M Detailing Product Diluter | 1 Diluter | 1
37712 | 3M Detailing Diluter Single Product | 1 Diluter | 1
37716 | 3M Detailing Spray Bottle | 1 Bottle | 24
37717 | 3M Detailing GP Spray Nozzle | 1 Spray Head | 24
37718 | 3M Detailing Solvent Spray Nozzle | 1 Spray Head | 24
37720 | 3M Detailing Squeeze Bottle | 1 Bottle & Top | 24
Part | Product | Container | Cont.No. | Name | Size | Per Case
46
38350 | 3M All Purpose Cleaner & Degreaser (38050)* | Gallon | 4
38351 | 3M All Purpose Cleaner & Degreaser (38051)* | 5-Gallon Pail | 1
38052 | 3M All Purpose Cleaner & Degreaser | 55-Gallon Drum | 1
38095 | 3M Extraction Cleaner* (See 38350) | Gallon | 4
38399 | 3M Glass Cleaner (38099)* | Gallon | 4
38300 | 3M Glass Cleaner (38100)* | 5-Gallon Pail | 1
38101 | 3M Glass Cleaner | 55-Gallon Drum | 1
38221 | 3M Premium Glass Cleaner | Gallon | 4
38222 | 3M Premium Glass Cleaner | 5-Gallon Pail | 1
Interior Dressing
38086 | 3M Interior Dressing | Gallon | 4
38087 | 3M Interior Dressing | 5-Gallon Pail | 1
Part | Product | Container | Cont.
No. | Name | Size | Per Case
Note: For Diluter Service Parts, contact Shopware, Inc. 1-800-877-9344
38105 | 3M Detail Compound #308 | Gallon | 4
38111 | 3M Detail Wax | Gallon | 4
38113 | 3M Perfect-It Gloss Enhancer | Gallon | 4
38114 | 3M Perfect-It Gloss Enhancer | 5-Gallon Pail | 138115 | 3M Perfect-It Gloss Enhancer | 55-Gallon Drum | 1
38116 | 3M Detail Polish #208 | Gallon | 4
38133 | 3M Detail Polish #108 | Gallon | 4
38112 | 3M Performance Finish | Quart | 6
39030 | 3M Performance Finish | Pint | 6
* Part number to be discontinued
8/10/2019 Detailing Manual
48/5247
O
RDERINGINFORMATION
Sanding
00850 | 3M Hookit II Finishing Film | P1500 | 50 | 4
00868 | 3M Hookit II Finishing Film | P1200 | 50 | 4
02023 | 3M Imperial Wetordry Paper Sheets | Micro Fine 1500 | 50 | 5
02044 | 3M Imperial Wetordry Paper Sheets | Micro Fine 2000 | 50 | 502045 | 3M Imperial Wetordry Paper Sheets | Micro Fine 2500 | 50 | 5
02075 | 3M Trizact Hookit II Foam Disc 6 | P3000 | 15 | 4
05274 | 3M Hookit II Soft Interface Pad | Pad | 6 Pad | 10
05251 | 3M Hookit II Disc Pad | Painters Pad | 6 Pad | 10
05291 | 3M Hookit II Hand Pad 6 | Pad | 6 Pad | 10
Part | Product | Grade | Sheets or | QuantityNo. | Name | | Pads/Box | Per Case
Compounding Pads
Part | Product | Items | Quantity
No. | Name | Per Unit | Per Case
Ordering Information(CONTINUED)
05703 | 3M Superbuff III Buffing Pad | Pad | 6
05704 | 3M Superbuff III 2 Plus 2 Buffing Pad | Pad | 6
05710 | 3M Superbuff adapter | adapter | 10
05717 | 3M Hookit SBS Backup Pad | Pad | 1
05718 | 3M Perfect-It Backup Pad | Pad | 1
05719 | 3M Perfect-It III Compounding Pad | Pad | 24
05723 | 3M Perfect-It Foam Compounding Pad | 2 Pads/Bag | 12
05737 | 3M Perfect-It Plus Foam Compounding Pad | 1 Pad/Bag | 6
8/10/2019 Detailing Manual
49/5248
Polishing Pads
Part | Product | Items | QuantityNo. | Name | Per Unit | Per Case
Detail Cloths
06016 | 3M Perfect-It Detail Cloths | 6 Cloths/Bag | 6
06017 | 3M Perfect-It Detail Cloths Bulk | 50 Cloths/Bag | 1
06018 | 3M Perfect-It Jumbo Detail Cloths | 6 Cloths/Bag | 6
Part | Product | Items | QuantityNo. | Name | Per Unit | Per Case
05717 | 3M Hookit SBS Backup Pad | Pad | 1
05718 | 3M Perfect-It Backup Pad | Pad | 1
05733 | 3M Perfect-It Plus Ultrafina Foam Polishing Pad - 8 I 1 Pad/Bag | 6
05751 | 3M Perfect-It Ultrafina Foam Polishing Pad - 8 I 2 Pads/Bag | 605725 | 3M Perfect-It Foam Polishing Pad | 2 Pads/Bag | 6
05729 | 3M Perfect-It Foam Polishing D/A Pad - 6 | 2 Pads/Bag | 12
05739 | 3M Perfect-It Hookit II Foam D/A Glazing Pad | 2 Pads/Bag | 12
05732 | 3M Perfect-It Hookit II DA Foam Application Pad - 6 I 2 Pads/Bag | 12
05738 | 3M Perfect-It Plus Foam Polishing Pad | Pad | 6
8/10/2019 Detailing Manual
50/5249
O
RDERINGINFORMATION
Spray Bottle Labels
60- | Product | Labels Per Pack*Number | Name
Ordering Information(CONTINUED)
60-4400-7328-0 | 3M Heavy Duty Wheel Cleaner | 25
60-4400-7329-8 | 3M Heavy Duty Wheel Cleaner/Concentrate | 25
60-4400-9926-9 | 3M All Purpose Cleaner and Degreaser HD 1:15 | 25
60-4400-9925-1 | 3M All Purpose Cleaner and Degreaser LD 1:30 | 2560-4400-7339-7 | 3M Glass Cleaner | 25
60-4400-7576-4 | 3M Premium Glass Cleaner | 25
60-4400-7346-2 | 3M Car Wash Soap | 25
60-4400-7341-3 | 3M Adhesive Remover | 25
60-4400-7331-4 | 3M Interior Dressing | 25
60-4400-7343-9 | 3M Engine and Tire Dressing | 25
60-4400-7340-5 | 3M Tire Dressing | 25
60-4400-8404-8 | 3M Silicone Free Tire Dressing | 25
60-4400-7344-7 | 3M Detail Polish #108 | 25
60-4400-7332-2 | 3M Detail Polish #208 | 25
60-4400-7614-3 | 3M Detail Polish #308 | 2560-4400-7345-4 | 3M Detail Wax | 25
60-4400-7342-1 | 3M Gloss Enhancer | 25
*Please Order Per Pack
Contact a 3M sales representative for more information:
3M Automotive Aftermarket Division3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000Telephone: 1-877-MMM-CARS (1-877-666-2277)
or (651) 737-6501
8/10/2019 Detailing Manual
51/5250
8/10/2019 Detailing Manual
52/52