Approx. 20,000 lb.
2” 150# flange
8” 150# flange
480V/60Hz
125 HP
60 HP
440 GPM (water)
12 tons per hour
2800 RPM
2300 G
70
21”
84”
3316 or 21 SS (optional duplex)
316 or 321 SS (optional duplex)
tungsten carbide
P-90
49:1
Approx. 1,200 lb.
CL390
15 HP
Approx. 5,000 lb.
all motors
access local/remote
local Wi-Fi and Internet
touchscreen HMI / personal computer
Approx. 8,000 lb.
9’ to 13’ with 4 settings @ 1’ apart
1350 gallons
850 lb.
10 HP
42”
38”
Approx. 15,000 lb.
1.5” 150# flange
6” 150# flange
480V/60Hz
75 HP
40 HP
350 GPM (water)
10 tons per hour
3200 RPM
2600 G
63
18”
72”
316 or 321 SS (optional duplex)
316 or 321 SS (optional duplex)
tungsten carbide
PA-69
40:1
Approx. 1,200 lb.
CL390
15 HP
Approx. 5,000 lb.
all motors
access local/remote
local Wi-Fi and Internet
touchscreen HMI / personal computer / potentiometer
Approx. 8,000 lb.
9’ to 13’ with 4 settings @ 1’ apart
1350 gallons
850 lb.
10 HP
42”
38”
Approx. 10,000 lb.
1.5” 150# flange
6” 150# flange
480V/60Hz
50 HP
15 HP
265 GPM (water)
7 tons per hour
3900 RPM
3000 G
57
14”
58”
316 or 321 SS (optional duplex)
316 or 321 SS
tungsten carbide
3.5
57:1
Approx. 1,200 lb.
PL200
7.5 HP
Approx. 5,000 lb.
all motors
access local/remote
local Wi-Fi and Internet
touchscreen HMI / personal computer / potentiometer
Approx. 8,000 lb.
9’ to 13’ with 4 settings @ 1’ apart
1350 gallons
850 lb.
10 HP
42”
38”
SERVICE REQUIREMENTSCentrifuge shipping weight:
Feed tube:
Effluent discharge:
Voltage/Frequency:
CENTRIFUGE MOTORSMain drive motor:
Back drive motor:
CENTRIFUGE PERFORMANCEMax. feed rate:
Max. solids discharge:
Max. bowl speed:
Centrifugal force:
Max. differential:
CENTRIFUGE SPECIFICSBowl diameter:
Bowl length:
Bowl material:
Conveyor material:
Solids end protection:
GEARBOX SPECIFICSGearbox type:
Gearbox ratio:
FEED PUMP AGGREGATEFeed pump shipping weight:
Feed pump type:
Feed pump motor:
VFD CABINET OPTIONSVFD shipping weight:
VFD capabilities:
VFD system:
VFD network functionality
VFD user interface
TELESCOPING STANDCentrifuge stand shipping weight:
Centrifuge stand height range:
AGITATOR SYSTEM OPTIONTank capacity:
Agitator weight (no tank):
Motor size:
Shaft length:
Impeller diameter:
RS-2100RS-1800RS-1400CENTRIFUGE DATA
www.rotatingsolutions.netO: (337) 334-3322 | F: (337) 334-0013
Address: 274 Service Rd | Rayne, LA 70578
14”, 18”, and 21” (2-Phase and 3-Phase Options)
• Page 2
Decanter Centrifuges
Recommended
