Transcript

CUTTING SOFTWARE INSTALLATIONFOR MAC OS X

STEP 1: Locate the "Document of Value", which is included with your cutter, that document has your Bundle Registration

Code

needed to get a License for SignCut Pro.

NOTE: This is NOT your License for SignCut Pro. This is the code that needs to be registered in order to redeem your 1year license for SignCut Pro.

STEP 2: To register and download SignCut Pro go to www.signcutpro.com/bundle.html. Click Register once all fieldsare filled. Click Register once all fields are filled.

NOTE: A page with the download links and your license will be displayed. Copy the license number; you will need it in justa few steps. This information will also be sent to the email address that was used to register. Do not delete that emailbecause you may need this info in the future.

* * * * DOWNLOAD REQUIRED SOFTWARE * * * *

* * * * * * * * * * * * * * * * * * * * * * * * * * * *

STEP 3: Locate the file you just downloaded and double click to start the install.

STEP 4: The following screen will be displayed. To install drag the SignCut icon to the Applications folder as the arrowindicates.

STEP 5: Enter your user information to allow the installation and press OK.

STEP 6: Once installed go to Applications, look for the SignCut Pro icon and double click to open it.

NOTE: The following warning message will pop up when opening the program for the first time, press Open.

STEP 7: The welcome screen will appear, select Next.

STEP 8: Enter the License number and click Next.

STEP 9: Match the settings as shown in the picture below and press Next.

STEP 10: Press Finish.

STEP 11: If the license activation is successful, the following screen will be displayed. Press OK.

NOTE: The SignCut Pro interface opens, at this point the cutter should be setup and ready to cut.

CUTTER SETUP

STEP 12: If you need to access the cutter settings, press the Cutter button or Settings > Cutter.

STEP 13: Match the settings from the example below and press Next.

STEP 14: To Cut, press the Scissor icon and press the Cut Out button.

Download and install the SignCut Export Plugins to send your designs from Adobe Illustrator or Inkscape.

Use Graphic Design software such as Adobe Illustrator or Inkscape to create your designs and use SignCut Pro to cutthem.

Enjoy your new vinyl cutter! Thank you for choosingUSCutter