CURRICULUM – VITAE
PERMANENT ADDRESS 4/1183-D, Afroz Villa
Zafar Iqbal Road, New Sir Syed Nagar
Aligarh- 202002 U.P., India
Ph. No.: +91-9412459748 E-mail: [email protected] [email protected]
- 1 -
FAISAL TALIB (PhD, IITR)
1. PRESENT POSITION
Associate Professor, Department of Mechanical Engineering, Zakir Husain College of
Engineering and Technology, Aligarh Muslim University, Aligarh, UP, India.
2. RESEARCH TOPIC (PhD)
Awarded PhD on the topic “Identifying, Implementing and Evaluating TQM Practices in
Select Indian Service Companies” from Indian Institute of Technology Roorkee (IITR) on
March 20, 2012.
3. EDUCATIONAL QUALIFICATION
2012‐ PhD, Indian Institute of Technology Roorkee (IITR), Roorkee, Uttrakhand, India.
1996‐ M.Sc. Engg. (Industrial), Aligarh Muslim University, Aligarh, UP, India.
1994‐ B.Sc. Engg. (Mechanical), Aligarh Muslim University, Aligarh, UP, India.
4. SCHOLARSHIPS AWARDED
GATE’ 94 Scholarship during M.Sc. Engg.
Jindal Trust Scholarship during B.Sc. Engg.
Rafia Sultana Scholarship during B.Sc. Engg.
Sir Syed Scholarship during B.Sc. Engg.
- 2 -
5. TEACHING EXPERIENCE (Twenty Three Years)
a. Working as Associate Professor in the Department of Mechanical Engineering, Zakir
Husain College of Engineering and Technology, Aligarh Muslim University, Aligarh
from 24‐05‐2016 to till date.
b. Worked as Associate Professor in Mechanical Engineering Section, University
Polytechnic, Faculty of Engineering and Technology, AMU, Aligarh from 01‐06‐2010 to
23‐05‐2016.
c. Worked as Reader in Mechanical Engineering Section, University Polytechnic, Faculty of
Engineering and Technology, AMU, Aligarh from 01‐06‐2007 to 31‐05‐2010
d. Worked as an Assistant Professor (Senior Lecturer) in Mechanical Engineering Section,
University Polytechnic, Faculty of Engineering and Technology, AMU, Aligarh from
01‐06‐2002 to 31‐05‐2007.
e. Worked as Lecturer in Mechanical Engineering Section, University Polytechnic, Faculty
of Engineering and Technology, AMU, Aligarh from 15‐06‐98 to 31‐05‐2002.
f. Worked as Lecturer in Department of Mechanical Engineering, Faculty of Engineering
and Technology, AMU, Aligarh from 08‐02‐1997 to 16‐01‐1998 & from 09‐05‐1998 to 14‐
06‐1998.
g. Worked as Part‐Time Lecturer in Drafting & Designing (Mechanical) Section, University
Polytechnic, AMU, Aligarh from 09‐09‐1996 to 07‐02‐1997.
6. COURSES TAUGHT
(a) At PhD Level
Research Methodology
(b) At Under‐Graduate Level
Manufacturing Technology‐I
Economics and Management
Total Quality Management
(c) At Diploma Level: Industrial Engineering
Industrial Management
- 3 -
Automation & CAM
Production Technology
7. RESEARCH INTEREST
Total Quality Management Total Quality Environmental Management
MCDM Techniques Operations Management
Quality Engineering Industrial Engineering and Management
8. CURRICULUM DEVELOPMENT
Designed syllabus for:
ME442 (Revised Total Quality Management (TQM))
MEC2930 (Manufacturing Technology Lab.‐I)
MEC3930 (Manufacturing Technology Lab.‐II)
MEC6921/ME792 (Production Engineering Lab.)
9. PhD SUPERVISED/CO-SUPERVISED
S.No. Topic Scholar Name Year of
Registration
Institution/Department Status of
PhD
1. Implementation of TQM
enablers & IT resources in
the Indian ICT
Organizations
Ms. Suby Khanam
(Co‐supervised)
2012 Department of
Computer Sciences,
Aligarh Muslim
University, Aligarh,
India
Awarded
(2016)
2. Quality Assurance and
Performance in Hotel
Industry in India and Jordan
Mr. Majed Massad
Sulaiman Al‐
Rawashdeh
(Co‐supervised)
2014 Department of
Management Studies, Aligarh Muslim
University, Aligarh,
India
Awarded
(2016)
3. Performance Evaluation of
Sustainable Industrial
Systems
Mr. Abdul Gani
(Co‐supervisor)
2016 Department of
Mechanical
Engineering, Jamia
Millia Islamia, New
Delhi, India
On‐
going
4. Classification & Early
Detection of Diabetes Using
Novel Machine Learning
Approach
Mr. Mohd. Atif
(Co‐supervisor)
2017 Department of
Computer Sciences,
Aligarh Muslim
University, Aligarh,
India
On‐
going
5. Total Quality Environmental
Management
Mr. Seraj Khan
(Supervisor)
2018 Department of
Mechanical
Engineering, Aligarh
Muslim University,
Aligarh, India
On‐
going
- 4 -
10. MTech DISSERTATION
S.No. Topic Name of Student Status
1. An Empirical Study of Critical Success
Factors of Total Quality Management in
Healthcare Establishments (HCEs)
Jal Singh Choudhry
(15MEIM‐67)
Awarded
(2017)
2. An Empirical Assessment of Green
Manufacturing Practices in Small and
Medium Enterprises (SMEs)
Md. Saalim
(17MEIM‐40)
Awarded
(2019)
3. A Comparative Performance Assessment of
Selected Indian Hospitals Using Data
Envelopment Analysis (DEA) Method
Dilip Kushwaha
(18MEIM‐35)
On‐going
11. MTech PROJECTS
S.No. Topic Name of Student Status
1. Ranking of the Barriers to Green
Manufacturing implementation in SMEs
Using Best‐Worst Method
Dilip Kushwaha
(18MEIM‐35)
Completed
(2019)
2. Best to Smart Green Manufacturing
Practices in Small and Medium Enterprises
(SMEs): An Importance‐Performance
Analysis (IPA) Approach
Mohd. Saalim
(17MEIM‐40)
Completed
(2018)
3. Barriers to Total Quality Management
(TQM) Implementation in Higher Education
Institutions (HEIs): An Interpretive
Structural Modeling (ISM) Approach
Ravi Prakash Chauhan
(17MEIM‐37)
Completed
(2018)
4. Design and Fabrication of Foldable Pressure
Cooker for Indian Domestic Consumers
Using FEM
Mohd. Faheem
(19MEIM‐722)
On‐going
12. RESEARCH CITATIONS
Total Citations as on 01‐05‐2020: 2312
h‐index = 24 and i10‐index = 35
Source: Google Scholar
13. RESEARCH PUBLICATIONS
Summary of papers presented and published:
Number of
Papers
Published in
Number of
Papers
Published in
Number of Papers
Presented/Published
in International
Number of Papers
Presented/Published
in National
Total
Papers
Published
- 5 -
International
Journals
National
Journals
Conferences Conferences/Seminars and
Under
Review
44+4* 05 27+1** 14 95
*Paper Under Review **Accepted for Presentation
A. Journals
a. International: {Forty Eight (48) Papers}
1. Talib, F. and Rahman, Z. (2020), ʺModeling the barriers towards the growth of higher
education institutions: a total interpretive structural modeling approach", Qualitative
Research Journal (QRJ), Emerald Publishers, Vol. 20 No. 2, pp. 243‐264 (Cite Score =
0.58).
2. Al‐Esmael, B., Talib, F., Faisal, M.N., and Jabeen, F. (2020), "Socially Responsible Supply
Chain Management in Small and Medium Enterprises in the GCC", Social Responsibility
Journal (SRJ), Emerald Publishers, Vol. 16 No. 3, pp. 369‐386 (Cite Score = 1.93).
3. Talib, F., Asjad, M., Attri, R., Siddiquee, A.N. and Khan, Z.A. (2019), ʺRanking model
of total quality management enablers in healthcare establishments using the Best‐Worst
Methodʺ, The TQM Journal, Emerald Publishers, Vol. 31 No. 5, pp 790‐814 (Cite Score
= 2.51).
4. Talib, F. and Asjad, M. (2019), ʺPrioritization and selection of non‐traditional machining
processes and their criteria using analytic hierarchy process approachʺ, International
Journal of Process Management and Benchmarking (IJPMB), Inderscience, UK, Vol.
9 No. 4, pp. 522‐546 (Scopus).
5. Faisal, M.N., Talib, F. and Bhutta, M.K. (2019), ʺEnablers of Sustainable Solid Waste
Management System in Indiaʺ, International Journal of Environment and Waste
Management (IJEWM), Inderscience, UK, Vol. 23 No. 3, pp. 213‐237 (Scopus).
6. Asjad, M. and Talib, F. (2018), ʺSelection of optimal machining parameters using integrated
MCDM approachesʺ, International Journal of Advanced Operations Management
(IJAOM), Inderscience, UK, Vol. 10 No. 2, pp.109–129 (Scopus).
- 6 -
7. Azam, M., Qureshi, M.N. and Talib, F. (2017), ʺQuality evaluation of healthcare
establishment utilizing Fuzzy AHPʺ, International Journal of Service Science,
Management, Engineering, and Technology (IJSSMET), IGI Global Publisher, Vol. 8
No. 4, pp. 83‐120 (Scopus).
8. Faisal, M.N. and Talib, F. (2017), ʺBuilding ambidextrous supply chains in SMEs: How to
tackle the barriers?ʺ International Journal of Information Systems and Supply Chain
Management (IJISSCM), IGI Global Publisher, Vol. 10 No.4, pp. 80‐100 (Scopus).
9. Talib, F. and Rahman, Z. (2017), ʺModeling the barriers of Indian telecom services using
ISM and MICMAC approachʺ, Journal of Asia Business Studies (JABS), Emerald
Publishers, Vol. 11 No. 2, pp. 188‐209 (Cite Score = 1.75).
10. Kumar, S. and Talib, F. (2017), ʺModelling the psychological and design attributes of
innovative product using interpretive structural modelingʺ, International Journal of
Intelligent Engineering Informatics (IJIEI), Inderscience, UK, Vol. 5 No. 2, pp. 139‐
166.
11. Faisal, M.N. and Talib, F. (2016), “Implementing traceability in Indian food supply chains: an
interpretive structural modeling approach”, Journal of Foodservice Business Research
(JFBR), Taylor & Francis Publishing Group, Vol. 19 No. 2, pp. 171–196 (Scopus).
12. Faisal, M.N. and Talib, F. (2016), ʺE‐government to m‐government: a study in a developing
economyʺ, International Journal of Mobile Communications (IJMC), Inderscience
Publishers, Vol. 14 No. 6, pp. 568–592 (Scopus, IF= 1.742 (TR)).
13. Khanam, S, Siddiqui, J. and Talib, F. (2016), ʺA DEMATEL approach for prioritizing the
TQM enablers and IT resources in the Indian ICT industryʺ, International Journal of
Applied Management Sciences and Engineering (IJAMSE), IGI Global Publisher,
Vol. 3 No. 1, pp. 11‐29.
14. Talib, F. and Rahman, Z. (2015), “Identification and prioritization of barriers to total
quality management implementation in service industry: an analytic hierarchy process
- 7 -
approach”, The TQM Journal, Emerald Publishers, Vol. 27 No. 5, pp. 591‐615 (Cite
Score = 2.51).
15. Khan, H., Talib, F. and Faisal, M.N. (2015), ʺAn analysis of the barriers to the proliferation
of m‐commerce in Qatar: a relationship modeling approachʺ, Journal of Systems and
Information Technology (JSIT), Emerald Publishers, Vol. 17 No. 1, pp. 54‐81 (Cite
Score = 1.79).
16. Talib, F. and Rahman, Z. (2015), “An interpretive structural modeling for sustainable
healthcare quality dimensions in hospital services”, International Journal of Qualitative
Research in Services (IJQRS), Inderscience, Vol. 2 No. 1, pp. 28‐46.
17. Talib, F., Azam, M and Rahman, Z. (2015), ʺService quality in healthcare establishments: a
literature reviewʺ, International Journal of Behavioural and Healthcare Research
(IJBHR), Inderscience, Vol. 5 Nos. 1/2, pp. 1‐24.
18. Azam, M., Qureshi, M.N. and Talib, F. (2015), ʺAHP model for identifying best healthcare
establishmentʺ, International Journal of Productivity Management and Assessment
Technologies (IJPMAT), IGI Global Publisher, Vol. 3 No. 2, pp. 34‐66.
19. Khanam, S., Talib, F. and Siddiqui, J. (2015), ʺIdentification of TQM enablers and IT
resources for ICT industry: a Pareto analysis approachʺ, International Journal of
Information Quality (IJIQ), Inderscience, Vol. 4 No. 1, pp. 18‐41 (Scopus).
20. Khanam, S, Siddiqui, J. and Talib, F. (2015), ʺModeling the TQM enablers and IT
resources in the ICT industry: An ISM‐MICMAC approachʺ, International Journal of
Information Systems and Management (IJISAM), Inderscience, Vol. 1 No. 3, pp. 195‐
218.
21. Khanam, S., Talib, F. and Siddiqui, J. (2014), ʺA review of TQM and IT research in the
ICT industry: an agenda for futureʺ, International Journal of Information and
Computer Science (IJICS), Science and Engineering Publishing Company, USA, Vol.
3 No. 1, pp. 64‐84.
- 8 -
22. Talib, F., Rahman, Z. and Akhtar, A. (2013), “An instrument for measuring the key practices
of total quality management in ICT industry: an empirical study in India”, Services
Business Journal (SBUS), Springer Verlag Publishing Group, Vol. 7 No. 2, pp. 275‐306
( Scopus, IF= 2.293 (TR)).
23. Talib, F., Rahman, Z. and Qureshi, M.N. (2013), “An empirical investigation of
relationship between total quality management practices and quality performance in Indian
service companies”, International Journal of Quality and Reliability Management
(IJQRM), Emerald Publishers, Vol. 30 No. 3, pp. 280‐318 (Cite Score = 2.52).
24. Talib, F., Rahman, Z. and Qureshi, M.N. (2013), “Survey on the usage of total quality
management tools and techniques in Indian service industries: an empirical analysis”,
International Journal of Quality and Innovation (IJQI), Inderscience, Vol. 2 No. 2,
pp.105–119.
25. Talib, F., and Rahman, Z. (2013), “Current health of Indian healthcare and hospitality
industries: a demographic study”, International Journal of Business Research and
Development (IJBRD), Science Target Publishers, Ottawa, Canada, Vol. 2 No. 1, pp.
1‐17.
26. Talib, F. (2013), “An overview of total quality management: understanding the fundamentals
in service organization”, International Journal of Advanced Quality Management
(IJAQM), Cloud Publication, Vol. 1 No. 1, pp. 1‐20.
27. Khanam, S, Siddiqui, J. and Talib, F. (2013), “Role of information technology in total
quality management: a literature review”, International Journal of Advanced Research
in Computer Engineering and Technology (IJARCET), Vol. 2 No. 8, pp. 2433‐2445.
28. Talib, F., Rahman, Z. and Qureshi, M.N. (2012), “Total quality management in service
sector: a literature review”, International Journal of Business Innovation and
Research (IJBIR), Inderscience, Vol. 6 No. 3, pp. 259‐301 (Scopus).
- 9 -
29. Talib, F., and Rahman, Z. (2012), “Total quality management practices in manufacturing
and service industries: A comparative study”, International Journal of Advanced
Operations Management (IJAOM), Inderscience, Vol. 4 No. 3, pp. 155‐176 (Scopus).
30. Azam, M., Rahman, Z., and Talib, F. and Singh, K.J. (2012), “A critical study of quality
parameters in health care establishment: developing an integrated quality model”,
International Journal of Health Care Quality Assurance (IJHCQA), Emerald
Publishers, Vol. 25 No. 5, pp. 387‐402 (Cite Score = 1.31).
31. Azam, M., Rahman, Z., and Talib, F. (2012), “Core quality and associated supportive
quality parameters/dimensions: a conceptual quality frame work in healthcare establishment”,
International Journal of Business Excellence (IJBEX), Inderscience, UK, Vol. 5 No. 3,
pp. 238‐277 (Scopus).
32. Talib, F., Rahman, Z. and Qureshi, M.N. (2012), ʺImpact of total quality management and
service quality in the banking sectorʺ, International Journal of Telecommunications
System and Management (IJTSM), Vol. 1 No. 2, DOI: 10.4172/2167‐0919.1000102,
OMICS Publications.
33. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Prioritising the practices of total quality
management: an analytic hierarchy process (AHP) analysis for the service industries”, Total
Quality Management and Business Excellence (TQM&BE), Taylor and Francis
Publishing Group, Vol. 22 No. 12, pp. 1331‐1351 (Scopus, IF=2.181(TR)).
34. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Assessing the awareness of total quality
management in Indian service industries: an empirical investigation” Asian Journal on
Quality (AJQ), Emerald Publishers, Vol. 12 No. 3, pp. 228‐243.
35. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Analysis of interaction among the
barriers to total quality management implementation using interpretive structural modeling
(ISM) approach”, Benchmarking: An International Journal (BIJ), Emerald Publishers,
Vol. 18 No. 4, pp. 563‐587 (Cite Score = 2.80).
- 10 -
36. Talib, F., Rahman, Z., Quershi, M.N. and Siddique, J. (2011), “Total quality management
and service quality: an exploratory study of management practices and barriers in service
industries”, International Journal of Services and Operations Management (IJSOM),
Inderscience, UK, Vol. 10 No. 1, pp. 94‐118 (Scopus).
37. Talib, F., Rahman, Z. and Azam, M. (2011), “Best practices of total quality management
implementation in healthcare setting”, Health Marketing Quarterly (HMQ), Routledge,
Taylor and Francis Publishing Group, Vol. 28 No. 3, pp. 232‐252 (Scopus).
38. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “An interpretive structural modeling
(ISM) approach for modeling the practices of total quality management in service sector”,
International Journal of Modeling in Operations Management (IJMOM),
Inderscience, Vol. 1 No. 3, pp. 223‐250.
39. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “A study of total quality management
and supply chain management practices”, International Journal of Productivity and
Performance Management (IJPPM), Emerald Publishers, Vol. 60 No. 3, pp.266‐288
(Cite Score = 2.75).
40. Talib, F. and Rahman, Z. (2010), “Critical success factors of TQM in service organizations:
a proposed model”, Services Marketing Quarterly (SMQ), Routledge, Taylor and
Francis Publishing Group, Vol. 31 No. 3, pp.363‐380 (Scopus).
41. Talib, F. and Rahman, Z. (2010), “Studying the Impact of Total Quality Management in
Service Industries”, International Journal of Productivity and Quality Management
(IJPQM), Inderscience, UK, Vol. 6 No. 2, pp.249‐268 (Scopus).
42. Talib, F., Rahman, Z. and Qureshi, M.N. (2010), “Pareto analysis of total quality
management factors critical to success for service industries”, International Journal of
Quality Research (IJQR), Center for Quality, University of Podgorica Montenegro
and University of Kragujevac, Serbia, Vol. 4 No. 2, pp. 155‐168.
43. Talib, F., Rahman, Z. and Qureshi, M.N. (2010), “The relationship between total quality
management and quality performance in the service industry: a theoretical model”,
- 11 -
International Journal of Business, Management and Social Sciences (IJBMSS),
MultiCraft, Vol. 1 No. 1, pp. 113‐128.
44. Muzammil, M., Singh, P. P. and Talib, F. (2003), “Optimization of gear blank casting
process by using Taguchi’s robust design technique”, Quality Engineering (QE), An
Official Journal of the American Society for Quality, Taylor and Francis Publishing
Group, Vol. 15 No. 3, pp‐351‐359 (Scopus).
45. Khanam, S., Siddiqui, J. and Talib, F. (2020), ʺAn instrument validation of TQM enablers
and IT resources in the Indian ICT organizationsʺ, Journal of Systems and Information
Technology (JSIT), Emerald Publishers, (Under Review).
46. Talib, F., Asjad, M., Attri, R., Siddiquee, A.N. and Khan, Z.A. (2020), ʺDeveloping a
road map for the implementation of integrated JIT‐lean practices in Indian manufacturing
industries using the Best‐Worst methodʺ, Journal of Industrial and Production
Engineering (JIPE), Routledge, Taylor and Francis Publishing Group, (Under
Review).
47. Josaiman, S.K., Faisal, M.N. and Talib, F. (2020), ʺSocial sustainability adoption barriers
in supply chains: a MiddleEast perspective using interpretive structural modelingʺ,
International Journal of Productivity and Performance Management (IJPPM),
Emerald Publishers, (Under Review).
48. Talib, F., Josaiman, S.K. and Faisal, M.N. (2020), ʺAn integrated AHP and ISO14000,
ISO26000 based approach for improving sustainability in supply chainsʺ, International
Journal of Quality and Reliability Management (IJQRM), Emerald Publishers,
(Under Review).
b. National: {Five (05) papers}
1. Talib, F., Rahman, Z. and Qureshi, M.N. (2010), “Integrating total quality management
and supply chain management: similarities and benefits”, The IUP Journal of Supply
Chain Management (IJSCM), ICFAI University Press, Hyderabad, India, Vol. 7 No. 4,
pp. 26‐44.
- 12 -
2. Siddiqui, J., Rahman, Z., Zafar, A. and Talib, F. (2009), “Information technology and
organizational associates: a synergy for agility”, The IUP Journal of Information
Technology (IJIT), ICFAI University Press, Hyderabad, India, Vol. 5 No. 1, pp.68‐81.
3. Rahman, Z. and Talib, F. (2008), “A study of optimization of process by using Taguchi’s
parameter design approach” The IUP Journal of Operations Management
(IJOPMGMT), ICFAI University Press, Hyderabad, India Vol. 7 No. 3, August, pp. 6‐
17.
4. Talib, F. and Ansari, A. H. (2006), “Effect of industrial solid waste on environment‐a case
study” Journal of Environmental Pollution and Control (EPC), New Delhi, India, Vol.
9 No. 5, July‐Aug., pp. 21‐25.
5. Talib, F. and Ali, M. (2003), “Impact of Quality Circle – a case study”, Journal of the
Institution of Engineers (India), (Production Engineering Section), Kolkata, India,
Vol. 84, May, pp. 10‐13.
B. Conferences/Seminars
a. International: {Twenty Eight (28) papers}
1. Kushwaha, D. and Talib, F. (2020), ʺComparative Efficiency Measurement of Indian
Hospitals Using Data Envelopment Analysis: A Proposed Modelʺ International
Conference on Industrial and Manufacturing Systems (CIMS‐2020) to be held
during June 26th‐28th, 2020 at Dr. BR Ambedkar National Institute of Technology
Jalandhar (NITJ), Punjab, India (Accepted for Presentation and Publication).
2. Kushwaha, D. and Talib, F. (2020), ʺRanking of Barriers to Green Manufacturing
Implementation in SMEs Using Best‐Worst Methodʺ, Published in: IOP Conference
Series: Materials Science and Engineering, International Conference on Mechanical
and Energy Technologies (ICMET‐2019) organized by Department of Mechanical
Engineering, Galgotia College of Engineering and Technology, Greater Noida, India
during November 07th‐08th, 2019, Vol. 748(1), (2020), Article: 012017, doi: 10.1088/1757‐
899X/748/1/012017.
- 13 -
3. Talib, F. and Rahman, Z. (2019), ʺMeasuring TQM Awareness in Indian Hospitality
Industryʺ, Proceedings of the 6th International Conference on Production and
Industrial Engineering (CPIE‐2019) (ISBN: 139789383893096) organized by
Department of Industrial and Production Engineering, National Institute of
Technology Jalandhar (NITJ), Punjab, India held between 08th‐10th June, 2019 (Paper
Presented).
4. Atif, M., Siddiqui, J. and Talib, F. (2019), ʺAn Overview of Diabetes Mellitus Prediction
Through Machine Learning Approachesʺ, Proceedings of the 13th INDIACom;
INDIACom‐2019; IEEE Conference ID: 46181 2019 6th International Conference on
“Computing for Sustainable Global Development”, Bharati Vidyapeethʹs Institute of
Computer Applications and Management (BVICAM), New Delhi (INDIA), 13th‐15th
March, 2019, pp. 904‐909, ISBN: 978‐938054434‐2 (Paper Presented).
5. Talib, F. and Rahman, Z. (2017), ʺPrioritizing the total quality management enablers in
healthcare establishments for improved performance: An analytic hierarchy process
approach", Published in the abstracts of 15th International Conference on
Ergonomics for Improved Productivity, Humanizing Work and Work Environment
(HWWE‐2017) organized by Department of Mechanical Engineering, Zakir Husian
College of Engineering & Technology, Aligarh Muslim University, Aligarh, India
during December 08‐10, 2017 (Paper Presented).
6. Khan, A., Yadav, A., Saraswat, S. and Talib, F. (2017), ʺEnhancing human productivity in
stress oriented jobs: A proposed model", Published in the abstracts of 15th International
Conference on Ergonomics for Improved Productivity, Humanizing Work and
Work Environment (HWWE‐2017) organized by Department of Mechanical
Engineering, Zakir Husian College of Engineering & Technology, Aligarh Muslim
University, Aligarh, India during December 08‐10, 2017 (Paper Presented).
7. Ahmad, A., Zaheen, S.A., Ahmad, I. and Talib, F. (2017), ʺCockpit Design of a Formula
Student Race Car: An Ergonomics study for the Cockpitʺ, Published in the abstracts of
15th International Conference on Ergonomics for Improved Productivity,
- 14 -
Humanizing Work and Work Environment (HWWE‐2017) organized by Department
of Mechanical Engineering, Zakir Husian College of Engineering & Technology,
Aligarh Muslim University, Aligarh, India during December 08‐10, 2017 (Paper
Presented).
8. Khan, F., Anjum, M.S. and Talib, F. (2017), ʺStudy of green practices in manufacturing
industry for enhanced performance: A proposed model", Published in the abstracts of 15th
International Conference on Ergonomics for Improved Productivity, Humanizing
Work and Work Environment (HWWE‐2017) organized by Department of
Mechanical Engineering, Zakir Husian College of Engineering & Technology, Aligarh
Muslim University, Aligarh, India during December 08‐10, 2017.
9. Bhutta, M.K., Faisal, M.N. and Talib, F. (2017), ʺSustainability of municipal solid waste
management in Indiaʺ, Published in the abstracts of 2017 Annual Meeting of the
Decision Sciences Institute Conference (DSI‐2017), going to be held between Nov.
18th‐20th, 2017, Washington D.C., USA (Paper Presented).
10. Talib, F. and Faisal, M.N. (2016), ʺAssessment of total quality management implementation
in Indian service industriesʺ, Proceedings in the abstracts of 2016 Annual Meeting of
the Decision Sciences Institute Conference (DSI‐2016), held between Nov 19th-22nd,
2016, Austin, TX, USA (Paper Presented).
11. Khanam, S., Siddiqui, J. and Talib, F. (2015), ʺAn Empirical Assessment of Awareness
Levels of IT for TQM in ICT: An Indian Case Studyʺ, Proceedings of 2nd International
Conference on Research and Business Sustainability (ICRBS‐2015) organized by
Department of Management Studies, Indian Institute of Technology Roorkee (IITR),
Greater Noida Campus, Greater Noida, UP, India in collaboration with Sheffield
Business School, Sheffield Hallam University, UK during December 4‐6, 2015, pp. 720‐
725.
12. Khanam, S., Siddiqui, J. and Talib, F. (2015), ʺPrioritising the TQM Enablers and IT
Resources in the ICT Industry: An AHP Approachʺ, Proceedings of 17th International
- 15 -
Conference on Information Technology, Systems and Management (ICITSM‐2015),
and published in the International Journal of Social, Behavioral, Educational,
Economic and Management Engineering (IJSBEEME) organized by World Academy
of Science, Engineering and Technology (WASET), Berlin, Germany during May 21‐
22, 2015, Vol.9, No.5, pp. 1668‐1675 (Paper Presented and Published).
13. Talib, F. and Rahman, Z. (2014), ʺAn Empirical Investigation of TQM Barriers in Indian
ICT and Banking Industriesʺ, Proceedings of 18th Annual International Conference of
the Society of Operations Management (SOM‐2015) jointly organized by
Department of Management Studies, IIT Roorkee and ABV IIITM, Gwalior, India
between December 12‐14, 2014, pp. 251‐262 (Paper Presented).
14. Khanam, S., Siddiqui, J. and Talib, F. (2014), ʺAssessing the awareness of total quality
management and information technology in the Indian information and communication
technology industry: An empirical analysisʺ, Proceedings of 18th Annual International
Conference of the Society of Operations Management (SOM‐2015) jointly organized
by Department of Management Studies, IIT Roorkee and ABV IIITM, Gwalior, India
between December 12‐14, 2014, pp. 834‐839 (Paper Presented).
15. Talib, F. and Rahman, Z. (2014), ʺIdentification and adoption of total quality management
practices in Indian information and communication technology and banking industries: an
empirical studyʺ, Proceedings of 3rd International Conference on Sustainability and
Management Strategy (ICSMS‐2014), organized by Institute of Management
Technology (IMT), Nagpur, MH, India in collaboration with California State
University SAN BERNARDINO and NEERI during March 21‐22, 2014 (Paper
Presented and Received Best Paper Award).
16. Khanam, S., Siddiqui, J. and Talib, F. (2014), “A Theoretical Model on Total Quality
Management Enablers and Information Technology Resources for the Information and
Communication Technology Industry”, Proceedings of International Conference on
Research and Sustainable Business (ICRSB‐2014), organized by Department of
- 16 -
Management Studies, Indian Institute of Technology Roorkee (IITR), Roorkee, UKh.,
India during March 08‐09, 2014, pp.831‐843 (Paper Presented).
17. Khanam, S, Siddiqui, J. and Talib, F. (2013), “Identification of Total Quality Management
Enablers and Information Technology Resources in the Information and Communication
Technology Industry”, Proceedings of International Conference on Smart
Technologies for Mechanical Engineering (STME‐2013), organized by Department
of Mechanical, Production & Industrial and Automotive Engineering, Delhi
Technological University, Delhi, India during October 25‐26, 2013, pp. 558‐567 (Paper
Presented).
18. Rahman, Z. and Talib, F. (2012), “Are Indian Hospitality Companies Aware of Total
Quality Management? An Empirical Investigation”, Published in the abstracts of
International Conference organized by Eurasia Business and Economics Society
(EBES‐2012), Warsaw, Poland, during November 1‐3, 2012 (Paper Presented).
19. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Identifying the Key Practices of TQM in
Indian Service Industries: An Empirical Analysis”, Proceedings of International
Conference on Advances in Supply Chain and Manufacturing Management
(ASCMM 2011), organized by Department of Industrial Engineering and
Management, Indian Institute of Technology Kharagpur (IITKhg), West Bengal, India
during December 16‐18, 2011, (Paper Presented).
20. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “An Empirical Study of Barriers to TQM
Implementation in Indian Service Industries”, Proceedings of First International
Conference on Industrial Engineering (ICIE 2011), organized by Department of
Mechanical Engineering, S.V. National Institute of Technology, Surat, India in
association with Indian Institution of Industrial Engineering (IIIIE), NHQ‐Mumbai,
India during November 17‐19, 2011, pp. 1072‐1084 (Paper Presented).
21. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Analysis of total quality management
practices in manufacturing and service sectors”, Proceedings of the First International
- 17 -
Congress of Interdisciplinary Research and Development (INRIT‐2011) in the
Special Issue of the International Journal of the Computer, the Internet and
Management, Vol. 19 No. SP1, organized by the Interdisciplinary Network of the
Royal Institute of Thailand under the Royal Patronage of HRH Princess Maha Chakri
Sirindhorn, Sapphire Rooms, IMPACT Exhibition Center, Muang Thong Thani,
Bangkok Metro, Thailand during 31st May‐01st June 2011, pp. 57.1‐57.8 (Paper
Presented).
22. Talib, F., Rahman, Z. and Azam, M. (2010), “Total Quality Management Implementation
in the Healthcare Industry: A Proposed Framework”, Proceedings of Second International
Conference on Production and Industrial Engineering (CPIE‐2010) organized by
Department of Industrial and Production Engineering, Dr. B.R. Ambedkar National
Institute of Technology, Jalandhar (NITJ), Punjab, India during December 03rd‐05th,
2010 pp. 1361‐1368 (Paper Presented).
23. Talib. F. and Rahman, Z. (2010), “Survey of total quality management practices in
manufacturing and service industries”, Proceedings of International Conference on
Operations and Management Sciences (ICOMS‐10) organized by Institute of
Management Technology (IMT), Nagpur, India during February 12th‐13th, 2010 pp.
616‐624 (Paper Presented).
24. Talib, F. and Rahman, Z. (2009),“ An exploratory study of total quality management
practices in service industries”, Published in the abstracts (Contributed Papers), 3rd
Annual International Conference on Management and Social Welfare organized by
Indian Institute of Social Welfare and Business Management (IISWBM), Kolkata, India
during 14‐15, December, 2009 (Paper Presented).
25. Talib, F. (2003), “Automated Production Through Flexible Manufacturing System – An
Approach for Factory of Future”, Published in the abstracts (Contributed Papers) of 48th
Congress of Indian Society of Theoretical & Applied Mechanics (ISTAM)‐An
- 18 -
International Meet jointly organized by Birla Institute of Technology, Mesra, Ranchi
& IIT, Kharagpur, India during December 18th – 21th , 2003 (Paper Presented).
26. Muzammil, M., Talib, F, Khan, A.A. and Murtaza, Q. (1998), “Effect of Welding Fumes
on Human Performance in Metal Fabricating Industry – A Case Study”, Published in the
abstracts of International Conference on Chemistry, Industry & Environment
(ICCIE – 98), Department of Applied Chemistry, Aligarh Muslim University, Aligarh,
India during Feb. 9th –11th, 1998 (Paper Presented).
27. Muzammil, M., Talib, F., Khan, A.A. and Murtaza, Q. (1998), “Effect of Environment
Stressors (Noise & Heat) on Human Performance in a Die Casting Industry – A Case Study”,
Published in the abstracts of International Conference on Chemistry, Industry and
Environment (ICCIE – 98), Department of Applied Chemistry, Aligarh Muslim
University, Aligarh, India during Feb. 9th–11th, 1998 (Paper Presented).
28. Muzammil, M., Khan, A.A., Talib, F. and Murtaza, Q. (1998), “Effect of Environment
Stressor (Noise) on Human Performance in a Polishing Industry – A Case Study”, Published
in the abstracts of International Conference on Chemistry, Industry & Environment
(ICCIE‐98), Department of Applied Chemistry, Aligarh Muslim University, Aligarh,
India during Feb. 9th –11th, 1998 (Paper Presented).
b. National: {Fourteen (14) papers}
1. Khanam, S. and Talib, F. (2016), ʺStudy of TQM enablers and IT resources in Indian ICT
organizationsʺ, Proceedings of National Conference on Mechanical Engineering –
Ideas, Innovations & Initiatives (NCMEI3‐2016), Department of Mechanical
Engineering, Aligarh Muslim University, Aligarh, India, April 16‐17, 2016 pp. 18‐26.
2. Khanam, S., Siddiqui, J. and Talib, F. (2014), ʺIdentification and ranking of TQM enablers
and IT resources in the Indian ICT industryʺ, Published in the abstracts of National
Conference on Recent Innovations & Advancements in Information Technology
(RIAIT–2014), Department of Information Technology, BGSB University, Rajouri,
Jammu & Kashmir, India, November 26–27, 2014 (Paper Presented).
- 19 -
3. Talib, F., Rahman, Z. and Qureshi, M.N. (2012), “Total Quality Management Practices in
Indian Hospitality Industry: Some Key Findings from Survey”, Proceedings of National
Conference on Emerging Challenges for Sustainable Business (ECSB‐2012),
Department of Management Studies, Indian Institute of Technology Roorkee, (IITR),
India, June 1‐2, 2012 pp. 1866‐1888.
4. Rahman, Z., Qureshi, M.N. and Talib, F. (2010), “Integrated Model for Prioritizing
Service Quality‐Case for Effective Supply Chain”, Proceedings of National Conference
on Advances in Mechanical Engineering (NCAME‐10), Mechanical Engineering
Section, University Polytechnic, Faculty of Engineering and Technology, Aligarh
Muslim University, Aligarh, UP, India, November 27‐28, 2010 pp. 139‐144.
5. Talib, F. and Rahman, Z. (2010), “Role of Total Quality Management and Service Quality
in the Banking Industry”, Proceedings of National Conference on Supply Chain
Management (SCMC‐10), Institute of Management Education (IME), Sahibabad,
Ghaziabad, India, March 26, 2010 pp. 216‐223.
6. Talib, F. and Rahman, Z. (2009), “Integrating Total Quality Management and Ergonomics:
an approach to Enhance Organization Performance”, Proceedings of All India National
Seminar on Ergonomics for Improved Productivity, Department of Mechanical
Engineering, Aligarh Muslim University, Aligarh, India organized by The Institution
of Engineers, India, Nov. 21‐22, 2009 pp. 154‐162.
7. Talib, F. and Ansari, A. H. (2008), “Industrial Solid Wastes Produced By Small Scale
Industries of Aligarh”, Proceedings of All India National Seminar on Advances in
Environmental Science & Tech., Department of Mechanical Engineering, Aligarh
Muslim University, Aligarh, India organized by The Institution of Engineers, India,
Feb. 15th‐16th, 2008 pp. 403‐409.
8. Talib, F. and Ansari, A. H. (2006), “Manufacturing Scenario in Small Scale Enterprises – A
Case Study”, Proceedings of National Conference on Advances in Manufacturing
Engineering (AIME‐2006), Department of Mechanical Engineering, Jamia Millia
- 20 -
Islamia, New Delhi, India, January 20th ‐21st, 2006 pp. 360‐373. (Received The Best
Paper Award)
9. Talib, F. (2002), “Solution to Unemployment in India: An Approach”, In the abstract of
National Seminar on Employment & Productivity, TTTI, Chandigarh, India, Sept. 5th‐
7th , 2002 (Paper Presented).
10. Qasim, K. and Talib, F. (2000), “Total Quality Management in Small Business”,
Proceedings of National Seminar on Entrepreneurship Development in India, TTTI,
Chandigarh, India, Nov. 15th‐ 16th, 2000, pp. 158‐167.
11. Talib, F. and Murtaza, Q. (2000), “Personality Aspects of an Entrepreneur for Rural Areas
in India” Proceedings of National Seminar on Women and Rural Entrepreneurship,
TTTI, Chandigarh, India, Nov. 15th – 16th, 2000, pp. 211‐217.
12. Ali, M. and Talib, F. (2000), “Solving Problems of Small Enterprises in Aligarh through
EDTP (Entrepreneurship Development Training Programme)” Proceedings of National
Seminar on Entrepreneurship Development in India, TTTI, Chandigarh, India, Nov.
15th – 16th, 2000, pp. 195‐204.
13. Talib, F. and Muzammil, M. (1998), “Comparing Quality Losses of a Cylindrical Bar by
Changing Tolerance Design using Taguchi’s Approach”, Published in the abstracts of
National Conference on Business Competitiveness and Growth through
Quantitative Methods, Indian Statistical Institute, Chennai, India, August 06th–08th,
1998 (Paper Presented).
14. Talib. F. and Khan, A. R. (1998), “Taguchi’s Loss Function Application for Quality”,
Proceedings of National Seminar on Maintenance and Condition Monitoring,
Thrissur, Kerala, India, Feb. 14th, 1998, pp. 83‐92.
14. ONLINE TEACHING AND LEARNING PROGRAMS/FDPs/WEBINARs ATTENDED
1. Attended a Webinar on ʺAccelerate Research Planning using Elsevierʹs Scopus,
ScienceDirect & Mendeleyʺ organized by The Islamic University of Science &
Technology (IUST), Awantipora, Jammu and Kashmir in collaboration with Elsevier,
India on May 04, 2020.
- 21 -
2. Attended a two days Online Faculty Development Programme (FDP) on ʺManaging
Online Classes and Researchʺ (Online Mode) organized by Faculty of Social Sciences,
Aligarh Muslim University, Aligarh in collaboration with INFLIBNET Centre,
Ahmedabad, India during April 29th‐30th, 2020.
3. Attended a one week ʺOn-line Teaching/Learning/Examinations Training Programme"
organized by UGC Human Resource Development Centre (HRDC), Aligarh Muslim
University, Aligarh, India during April 20th-23rd, 2020.
15. WORKSHOP(S)/TRAINING PROGRAMS/STTP/STC/REFRESHER COURSE(S)
ATTENDED
1. Attended a one week Short‐term Course on ʺJoining of Advanced Materialsʺ
sponsored by TEQIP‐III and organized by Department of Mechanical Engineering,
Indian Institute of Technology Delhi (IITD), New Delhi, India during December 09th‐
13th, 2019.
2. Attended a one week AICTE Teaching and Learning (ATAL) Academies Programme
on ʺ3D Printing & Design with Interdisciplinary Applications (3DPDIA)ʺ organized
by Department of Mechanical Engineering, Maulana Azad National Institute of
Technology (MANIT) Bhopal, Madhya Pradesh, India during November 04th‐08th,
2019.
3. Attended a one week FDP on ʺQuality Management: Importance, Issues, and
Challengesʺ sponsored by TEQIP‐III, MHRD and organized by Department of
Mechanical & Industrial Engineering of IIT Roorkee, Roorkee, UKh, India during June
17th‐21st, 2019.
4. Attended a one week Global Initiative of Academic Networks (GIAN) Course on
ʺPrecision Manufacturingʺ organized by Department of Mechanical Engineering,
National Institute of Technology Warangal (NITW), Telangana, India during March
18th‐22nd, 2019.
5. Attended the 11 days Expert Lecture Series on ʺData Analytics Using Pythonʺ
organized by Department of Mechanical Engineering, Zakir Husain College of
- 22 -
Engineering & Technology, Aligarh Muslim University, Aligarh, India during
October‐November, 2018.
6. Attended a three days Workshop on ʺResearch, Writing, and Publishing in High
Impact Journalsʺ organized by Department of Civil Engineering and Department of
Architecture, Aligarh Muslim University, Aligarh, India during August 17th‐19th, 2018.
7. Attended an International Seminar on ʺManaging Research with Effective Outcomeʺ
organized by the Department of Computer Engineering, Aligarh Muslim University,
Aligarh, India on August 06th, 2018.
8. Attended a one week Workshop on ʺStatistics & Optimization Techniques Using
Software Packagesʺ organized by Department of Statistics & Operations Research,
Aligarh Muslim University, Aligarh, India during March 26th‐31st, 2018.
9. Attended a one week Workshop on ʺMachine Learning & Big Data Analyticsʺ
organized by Department of Computer Engineering, Zakir Husain College of
Engineering & Technology, Aligarh Muslim University, Aligarh, India during March
04th‐10th, 2018.
10. Attended a one week National Workshop on ʺResearch Methodologyʺ organized by
Dr. B.R. Ambedkar Hall, Aligarh Muslim University, Aligarh, India during February
05th‐11th, 2018.
11. Attended a one day Workshop on ʺIntellectual Property Rights for Academic
Institutionsʺ organized by Mechanical Engg. Section, University Polytechnic, Aligarh
Muslim University, Aligarh, India on August 26, 2017.
12. Attended a one day International Workshop on ʺPublishing in High Impact Journals
(PHIJ)ʺ organized by Zakir Husain College of Engineering & Technology, Aligarh
Muslim University, Aligarh, India on April 25, 2017.
13. Attended a one week training program on ʺSiemenʹs PLM NX CAD (Basics and
Advanced) Softwareʺ organized by Department of Mechanical Engineering, Z.H.
- 23 -
College of Engineering & Technology, Aligarh Muslim University, Aligarh, India
during March 26th‐31st, 2017.
14. Undergone one week comprehensive training in ʺComputer Integrated Manufacturing
System (CIM)ʺ at Department of Mechanical Engineering, Z.H. College of Engineering
& Technology, Aligarh Muslim University, Aligarh, India during 22nd‐27th October,
2016.
15. Attended two days National Workshop on ʺCondition Monitoring of Machines
(NWCMM‐2016)ʺ organized by Department of Mechanical Engineering, Z.H. College
of Engineering & Technology, Aligarh Muslim University, Aligarh, India during
October 19th‐20th, 2016.
16. Attended one day workshop on ʺMake in India: Opportunities and Challenges for
Engineers (MIOCE‐2016)ʺ organized by Electrical Engineering Section, University
Polytechnic, Aligarh Muslim University, Aligarh on March 28, 2016.
17. Attended a two days workshop on “Industrial Automation” organized by
Department of Electrical Engineering, Aligarh Muslim University, Aligarh from
February 15 to 16, 2014.
18. Attended one day workshop on “Biomedical Engineering and its Recent Trends
(BERT‐2014)” jointly organized by Department of Mechanical and Electrical
Engineering, Aligarh Muslim University, Aligarh on February 11, 2014.
19. Attended a two days workshop on “Emerging Trends in Communication Technology
(ECT‐2013)” organized by University Women Polytechnic, Aligarh Muslim
University, in association with Institution of Engineers (IE) and Institution of
Electronics and Telecommunication Engineers (IETE), Aligarh Local Center from 9th to
10th February, 2013.
20. Attended one day workshop on “Econometrics for Time Series Analysis using
Statistical Software” organized by Department of Management Studies, Indian
Institute of Technology Roorkee (IITR), Roorkee on November 15, 2011.
- 24 -
21. Attended a two days 6th National Quality Conclave on “The Future of Quality‐The
National Agenda” organized by Quality Council of India (QCI), Government of India,
New Delhi, from February 11 to 12, 2011.
22. Attended a two days 5th National Quality Conclave on “Leveraging Quality for Good
Governance” organized by Quality Council of India (QCI), Government of India, New
Delhi, from February 19 to 20, 2010.
23. Attended an AICTE sponsored QIP short term course of one week duration on
“Environment Health and Safety Management” organized by Department of
Chemical Engineering, Indian Institute of Technology, Roorkee (IITR), from January
25 to 29, 2010.
24. Attended an AICTE sponsored QIP short term course of one week duration on “Role
of Communication Skills and Leadership in Corporate World” organized by
Department of Humanities and Social Sciences, Indian Institute of Technology,
Roorkee (IITR), from June 29 to July 03, 2009.
25. Attended an AICTE sponsored QIP short term course of one week duration on
“Research Methodology and Quantitative Techniques with Software Applications”
organized by Department of Humanities and Social Sciences, Indian Institute of
Technology, Roorkee (IITR), from June 8‐12, 2009.
26. Attended an AICTE sponsored QIP short term course of one week duration on
“Dynamics of Professional Excellence: State‐of‐Art Teaching Methodology”
organized by Department of Humanities and Social Sciences, Indian Institute of
Technology, Roorkee (IITR), from March 2‐6, 2009.
27. Attended one week short term course sponsored by Central Pollution Control Board
(CPCB), New Delhi on “Solid Waste Management” organized by Department of Civil
Engineering, Indian Institute of Technology, Roorkee (IITR) from January 12‐16, 2009.
- 25 -
28. Attended an AICTE sponsored QIP of one week duration on “Supply Chain &
Quality Management” organized by Faculty of Management Studies, Banaras Hindu
University (BHU), Varanasi from 26th Nov. to 1st Dec., 2007.
29. Attended UGC sponsored four weeks Orientation course organized by Academic
Staff College, AMU, Aligarh from 15th March to 14th April, 2005.
30. Attended one week Short Term Training Programme on “PLC & its applications”
sponsored by NITTTR, MHRD, Chandigarh held at University Polytechnic, AMU
from January 17‐21, 2005.
31. Attended a two weeks Short Term Training Programme on “Mechatronics”
sponsored by ISTE organized by NITTTR, MHRD, Chandigarh from December 13‐24,
2004.
32. Attended an AICTE sponsored one day workshop on “Environmental & Pollution
Awareness” organized by University Polytechnic, AMU, Aligarh held on Nov. 27,
2004.
33. Attended one week Short Term Course sponsored by Centre for Development of
Technical Education (CDTE) on “Scientific Computing with MATLAB” organized by
Indian Institute of Technology Kanpur (IITK), from June 7‐11, 2004.
34. Attended a two weeks course on “Communications Skills” organized by Academic
Staff College AMU, Aligarh from Feb. 20–29, 2004.
35. Attended an AICTE sponsored two weeks Short Term Training Programme on
“Advanced Manufacturing Techniques” organized by ISTE, New Delhi and conducted
by University Polytechnic, AMU, Aligarh from 21st Oct. to 2nd Nov. 2002.
36. Undergone one week comprehensive CNC Milling Training Courses at the MTAB –
Denford Technology Center, Chennai, India from June 3‐8, 2002.
37. Attended UGC sponsored three weeks Refresher course in the subject “Mechanical
Engineering (Advanced Topics)” organized by Academic Staff College, AMU, Aligarh
from Dec.10‐30, 2001.
- 26 -
38. Attended three weeks short term Training Programme on “Computer Awareness”
organized by ISTE chapter and Community Polytechnic, conducted by University
Polytechnic, AMU, Aligarh from Aug.14 to Sep.3, 2000.
39. Attended an AICTE sponsored three weeks “Induction Training Programme”
organized by Academic Staff College, AMU, Aligarh from May 05‐27, 1997.
16. MEMBER OF EDITORIAL BOARD
1. Member of the Technical Advisory Committee, International Conference on
Industrial and Manufacturing Systems (CIMS‐2020) going to be organized by
Department of Industrial & Production Engineering, Dr. BR Ambedkar National
Institute of Technology Jalandhar (NITJ), Punjab, India, during June 26th–28th, 2020.
2. Member, Editorial Review Board, International Journal of E‐Entrepreneurship and
Innovation (IJEEI), IGI Global Publishers, Hershey, Pennsylvania (USA),
DOI: 10.4018/IJEEI, ISSN: 1947‐8585, EISSN: 1947‐8593.
3. Associate Editor, International Journal of Productivity Management and Assessment
Technologies (IJPMAT), IGI Global Publishers, Hershey, Pennsylvania (USA),
DOI: 10.4018/IJPMAT, ISSN: 2160‐9837, EISSN: 2160‐9845.
4. Member, Editorial Review Board, International Journal of Responsible Management
Education (IJRME), IGI Global Publishers, Hershey, Pennsylvania (USA), DOI:
10.4018/IJRME.
5. Associate Editor, Evolutions in Mechanical Engineering (EME), Crimson Publishers,
New York, USA, ISSN: 2640‐9690.
6. Member of the Advisory Committee, 4rd International Conference on Sustainability
and Management Strategy (ICSMS‐2015), organized by Institute of Management
Technology (IMT), Nagpur, India, September 4‐5, 2015.
7. Member of the Advisory Committee, 3rd International Conference on Sustainability
and Management Strategy (ICSMS‐2014), organized by Institute of Management
Technology (IMT), Nagpur, India, 21‐22 March, 2014.
- 27 -
8. Member, Editorial Review Board, International Journal of Information Systems in the
Service Sector (IJISSS), IGI Global Publishers, Hershey, Pennsylvania (USA), DOI:
10.4018/IJISSS, ISSN: 1935‐5688, EISSN: 1935‐5696.
9. Member, Editorial Review Board, International Journal of Applied Management
Sciences and Engineering (IJAMSE), IGI Global Publishers, Hershey, Pennsylvania
(USA), DOI: 10.4018/IJAMSE, ISSN: 2327‐7483, EISSN: 2327‐7491.
10. Member, Editorial Review Board, International Journal of Business Intelligence
Research (IJBIR), IGI Global Publishers, Hershey, Pennsylvania (USA),
DOI: 10.4018/IJBIR, ISSN: 1947‐3591, EISSN: 1947‐3605.
11. Member, Editorial Review Board, International Journal of Service Science,
Management, Engineering, and Technology (IJSSMET), IGI Global Publishers,
Hershey, Pennsylvania (USA), DOI: 10.4018/IJSSMET, ISSN: 1947‐959X|EISSN: 1947‐
9603.
12. Member, Editorial Review Board, Engineering and Technology Quarterly Reviews,
Asian Institute of Research (AIOR), Indonesia, ISSN 2622‐9374.
13. Member, Editorial Board, Institute of Research Engineers and Doctors (IRED)
International Journals/Conferences, New Castle, DE, USA.
14. Member, Editorial Board, International Journal of Information and Computer Science
(IJICS), Japan, ISSN: 2161‐5381.
15. Member, Editorial Board, International Journal of Engineering Management
Research (EMR), Canadian Center of Science and Education, Toronto, Canada, ISSN:
1927‐7326.
16. Member, Editorial Review Board, International Journal of Business Research and
Development (IJBRD), Science Target Inc., Refereed International Journal, Ottawa,
Canada, ISSN: 1929‐0977.
- 28 -
17. Member, Editorial Board, International Journal of Scientific Research in Knowledge
(IJSRK), International Journals of Scientific Research Publications, Penang, Malaysia,
ISSN: 2322‐4541.
18. Member, Editorial Board, World Journal of Engineering and Technology (WJET),
Scientific Research Publishing (SCIRP), Irvine CA, USA. ISSN: 2331‐4249.
19. Member, Editorial Board, Modern Mechanical Engineering (MME), Scientific Research
Publishing (SCIRP), Irvine CA, USA. ISSN 2164‐0181.
20. Member, Editorial Board, American Journal of Industrial and Business Management
(AJIBM), Scientific Research Publishing (SCIRP), Irvine CA, USA. ISSN: 2164‐5175.
21. Member, Editorial Board, Intelligent Information Management (IIM), Scientific
Research Publishing (SCIRP), Irvine CA, USA. ISSN: 2160‐5920.
22. Member, Editorial Board, Communications and Network (CN), Scientific Research
Publishing (SCIRP), Irvine CA, USA. ISSN: 1947‐3826.
17. REVIEWER
1. Reviewed papers for Production Planning & Control, Taylor and Francis Publishers,
ISSN: 0953‐7287.
2. Expert reviewer in the review panel of Total Quality Management & Business
Excellence (TQM&BE), Taylor and Francis Publishers, ISSN: 1478‐3371.
3. Expert reviewer in the review panel of International Journal of Quality and
Reliability Management (IJQRM), Emerald Publishers, ISSN: 0265‐671X.
4. Reviewed papers for Production and Manufacturing Research: An Open Access
Journal (TPMR), Taylor and Francis Publishers, ISSN: 2169‐3277.
5. Reviewed papers for International Journal of Hospitality Management (IJHM),
ELSEVIER (Science Direct), ISSN: 0278‐4319.
6. Expert reviewer in the review panel of International Journal of Health Education,
Emerald Publishers, ISSN: 0965‐4283.
7. Expert reviewer in the review panel of Journal of Advances in Management Research
(JAMR), Emerald Publishers, ISSN: 0972‐7981.
- 29 -
8. Reviewed papers for the United States Association for Small Business and
Entrepreneurship (USASBE) 28th Annual Conference on Cowboys, Culture and
Creativity, January 9‐12, 2014 in Forth Worth, Texas, USA.
9. Reviewed papers for the United States Association for Small Business and
Entrepreneurship (USASBE) 26th Annual Conference on Entrepreneurship: A Source
of Renewal and Growth, January 12‐15, 2012 in New Orleans, Louisiana, USA.
10. Reviewed papers for International Journal of Service Business (SBUS), Springer Link,
ISSN: 1862‐8508.
11. Reviewed papers for The International Journal of Health Care Quality Assurance
(IJHCQA), Emerald Publishers, ISSN: 0952‐6862.
12. On the panel of reviewers for The Service Industries Journal‐ An International
Journal (SIJ), Taylor and Francis Publishers, October 2009. The Service Industries
Journal is listed in the Thomson ISI Social Science Citation Index under Management.
13. Reviewed papers for The Service Industries Journal‐An International Journal (SIJ),
Taylor and Francis Publishers, ISSN: 0264‐2069.
14. Reviewed papers for Benchmarking: An International Journal (BIJ), Emerald Publishers,
ISSN: 1463‐5771.
15. Reviewed papers for International Journal of Bank Marketing (IJBM), Emerald
Publishers, ISSN: 0265‐2323.
18. MEMBERSHIP OF PROFESSIONAL BODIES
1. Fellow Member (FIE) of “The Institution of Engineers, India (IEI)”, Membership No.:
F‐1232106, Division: MC (Mechanical), Aligarh Local Center, Aligarh,UP, India.
2. Life Member (LM) of ʺIndian Society for Technical Education (ISTE)ʺ, Membership
No.: LM‐102510, New Delhi, India.
3. Senior Member of ʺInternational Engineering and Technology Institute (IETI)ʺ,
Membership No.: 2015071319, Kowloon, Hong Kong.
4. Member of ʺInternational Association of Engineers (IAENG)ʺ, Membership No.:
183054, Hong Kong.
- 30 -
5. Member of ʺInstitute for Engineering Research and Publication (IFERP)ʺ,
Membership No.: PMIN74210863, Chennai, Tamil Nadu, India.
19. HONORS AND AWARDS
Received “Best Paper Award” in the 3rd International Conference on Sustainability
and Management Strategy (ICSMS‐2014) for the paper entitled ʺIdentification and
adoption of total quality management practices in Indian information and communication
technology and banking industries: an empirical studyʺ held at Institute of Management
Technology (IMT), Nagpur, India during March 21‐22, 2014.
Received “Best Paper Award” in the National Conference on Advances in Mechanical
Engineering‐2006 (AIME) for the paper entitled “Manufacturing Scenario in Small Scale
Enterprises– A Case Study” held at Jamia Millia Islamia (JMI), New Delhi from January
20‐21, 2006.
20. SESSION CHAIR/CO-CHAIR
Organizing Secretary, FDP cum Induction Programme on Teaching, Learning,
Research and Evaluation Strategies sponsored by TEQIP‐III organized by
Department of Mechanical Engineering, Aligarh Muslim University, Aligarh, India
during March 19‐23, 2018.
Co‐chaired a session in the 15th International Conference on Ergonomics for
Improved Productivity, Humanizing Work and Work Environment (HWWE‐2017)
organized by Department of Mechanical Engineering, Zakir Husian College of
Engineering & Technology, Aligarh Muslim University, Aligarh, India during
December 08‐10, 2017.
Chaired a session in the 3rd International Conference on Sustainability and
Management Strategy (ICSMS‐2014) held at Institute of Management Technology
(IMT), Nagpur, India during March 21‐22, 2014.
21. SPECIAL LECTURES DELIVERED
Delivered a Lecture on “CNC & Part Programme” at STTP on Advanced
Manufacturing Techniques at University Polytechnic, AMU.
- 31 -
Delivered Lecture on “Taguchi’s Loss Function Application for Quality” under ISTE
Chapter at University Polytechnic, AMU.
22. SOFTWARE PROFICIENCY
1. Statistical Package for the Social Sciences (SPSS)‐17.0, MINITAB‐16.0–for Statistical
Analysis.
2. Structural Equation Modeling (SEM) using Amos‐8.0 (Analysis of Moment Structures)
Software‐ for model building, testing and validating.
3. Analytic Hierarchy Process (AHP) Software‐ for calculating the priority weights and
CI values of AHP models from Pairwise Comparison Matrixes.
4. MS‐Excel, MS‐Word, MS‐FrontPage.
5. Basic knowledge of Computer hardware and Interfacing.
23. CONTRIBUTION TO THE CORPORATE LIFE (AT ALIGARH MUSLIM UNIVERSITY)
1. Departmental Coordinator, Internal Quality Assurance Cell (IQAC), Department of
Mechanical Engineering, Aligarh Muslim University (AMU), Aligarh (Since August
2019).
2. Incharge, Powder Metallurgy Lab, Department of Mechanical Engineering, Aligarh
Muslim University (AMU), Aligarh (Since May 2018).
3. Assigned Member Board of Studies (BOS), Leather & Footwear Technology Section,
University Polytechnic, AMU, Aligarh (Since December 2017).
4. Served as Member of Massive Online Open Courses (MOOCs) Departmental
Committee, Department of Mechanical Engineering, AMU, Aligarh.
5. Serving as Tabulator of BE (Evening)‐Mechanical Engineering, Department of
Mechanical Engineering, AMU, Aligarh from May 2016 to till date.
6. Serving as Scrutinizer of Answer Books, Department of Mechanical Engineering
AMU, Aligarh from May 2016 to till date.
7. Served as Scrutinizer to scrutinize the M.Tech. Admission forms for the session 2018‐
19, Department of Mechanical Engineering AMU, Aligarh.
- 32 -
8. Served as Verifying Officer for completion of admission to M.Tech. (Mechanical
Engineering), Department of Mechanical Engineering, AMU, Aligarh, 2019.
9. Served as Verifying Officer for completion of admission to M.Tech. (Mechanical
Engineering), Department of Mechanical Engineering, AMU, Aligarh, 2018.
10. Served as Superintendent of Examination for conducting B.Tech. Mid‐Semester
Examination of Department of Mechanical Engineering, AMU, Aligarh, 2017
11. Served as Verifying Officer for completion of admission to M.Tech. (Mechanical
Engineering), Department of Mechanical Engineering, AMU, Aligarh, 2016.
12. Served as Verifying Officer for completion of admission to B.Tech., Zakir Husain
College of Engineering & Technology (ZHCET), AMU, Aligarh, 2017.
13. Served as Verifying Officer for completion of admission to B.Tech., Zakir Husain
College of Engineering & Technology (ZHCET), AMU, Aligarh, 2016.
14. Served as Assistant Superintendent for conducting M.Tech. Admission Test of
Department of Mechanical Engineering, AMU, Aligarh, 2017.
15. Served as Assistant Superintendent of Examination of University Polytechnic
Examination Center, AMU, Aligarh from December 2013 to May 2016.
16. Served as Chief‐scrutinizer in Mechanical Engineering Section, University
Polytechnic, AMU, Aligarh for last three consecutive academic sessions i.e. from
March, 2011 to October, 2014.
17. Served as Incharge of Training‐cum‐Prototype Extension Center (TPEC) and Common
Facility Center (CFC), the community development schemes funded by UP
Government, Ministry of Small Scale Industry, at Workshop Complex of University
Polytechnic, AMU, Aligarh from March 2013 to September 2014.
18. Served as Assistant Superintendent of Examination of University Polytechnic
Examination Center, AMU, Aligarh for a period of two years (2006‐2008).
- 33 -
19. Served as Assistant Project Officer (APO) in the Community Polytechnic Scheme,
funded by Ministry of Human Resource Development (MHRD), at University
Polytechnic, AMU, Aligarh for a period of three years.
20. Imparted teaching and training on Computer Awareness to the students of final year
Diploma Engineering (All branches), University Polytechnic, AMU.
21. Established & introduced a complete Industrial Engineering Lab & developed various
experiments/equipments/layouts/charts/diagrams and many more. Designed 10 (ten)
experiments and instruction sheets for laboratory work at Mechanical Engineering
Section, University Polytechnic, AMU, Aligarh
22. Modified Metrology Lab through the introduction of new experiments & equipments
in Mechanical Engineering Section, University Polytechnic, AMU, Aligarh.
24. CITATION DETAIL (2312 as on 01‐05‐2020); h‐index=24; i10‐index=35
S.No. Citation Times
Cited
1. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Analysis of interaction
among the barriers to total quality management implementation using interpretive
structural modeling (ISM) approach”, Benchmarking: An International
Journal (BIJ), Emerald Publishers, Vol.18, No.4, pp. 563‐587.
272
2. Talib, F., Rahman, Z. and Qureshi, M.N. (2013), “An empirical investigation
of relationship between total quality management practices and quality
performance in Indian service companies”, International Journal of Quality
and Reliability Management (IJQRM), Emerald Publishers, Vol. 30, No.3,
pp. 280‐318
228
3. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “A study of total quality
management and supply chain management practices”, International Journal
of Productivity and Performance Management (IJPPM), Emerald
Publishers, Vol.60, No.3, pp.266‐288.
186
4. Talib, F. and Rahman, Z. (2010), “Critical success factors of TQM in service
organizations: a proposed model”, Services Marketing Quarterly, Routledge,
Taylor and Francis Publishing Group, Vol.31, No.3, pp.363‐380.
140
5. Talib, F., Rahman, Z. and Qureshi, M.N. (2010), “The relationship between
total quality management and quality performance in the service industry: a
119
- 34 -
theoretical model”, International Journal of Business, Management and
Social Sciences (IJBMSS), MultiCraft, Vol. 1, No. 1, 2010, pp. 113‐128.
6. Talib, F., Rahman, Z. and Azam, M. (2011), “Best practices of total quality
management implementation in healthcare setting”, Health Marketing
Quarterly, Routledge, Taylor and Francis Publishing Group, Vol.28, No.3,
pp. 232‐252.
106
7. Talib, F., Rahman, Z., Quershi, M.N. and Siddique, J. (2011), “Total quality
management and service quality: an exploratory study of management practices
and barriers in service industries”, International Journal of Services and
Operations Management (IJSOM), Inderscience, UK, Vol.10, No.1, pp. 94‐
118.
90
8. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Prioritising the practices of
total quality management: an analytic hierarchy process (AHP) analysis for the
service industries”, Total Quality Management and Business Excellence
(TQM&BE), Taylor and Francis Publishing Group, Vol.22, No.12, pp. 1331‐
1351.
81
9. Talib, F., Rahman, Z. and Qureshi, M.N. (2012), “Total quality management
in service sector: a literature review”, International Journal of Business
Innovation and Research (IJBIR), Inderscience, Vol. 6, No.3, pp. 259‐301.
80
10. Talib, F., Rahman, Z. and Qureshi, M.N. (2010), “Pareto analysis of total
quality management factors critical to success for service industries”,
International Journal Quality Research (IJQR), Center for Quality,
University of Podgorica Montenegro and University of Kragujevac, Serbia,
Vol.4, No.2, pp. 155‐168.
78
11. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “An interpretive structural
modeling (ISM) approach for modeling the practices of total quality management
in service sector”, International Journal of Modeling in Operations
Management (IJMOM), Inderscience, Vol.1, No.3, pp. 223‐250.
72
12. Talib, F. and Rahman, Z. (2010), “Studying the Impact of Total Quality
Management in Service Industries”, International Journal of Productivity
and Quality Management (IJPQM), Inderscience, UK, Vol.6, No.2, pp.249‐
268.
69
13. Talib, F. (2013), “An overview of total quality management: understanding the
fundamentals in service organization”, International Journal of Advanced
Quality Management (IJAQM), Cloud Publication, Vol.1 No.1, pp. 1‐20.
66
- 35 -
14. Talib, F., Rahman, Z. and Qureshi, M.N. (2010), “Integrating Total Quality
Management and Supply Chain Management: Similarities and Benefits”, The
IUP Journal of Supply Chain Management (IJSCM), ICFAI University
Press, Hyderabad, India, Vol. 7, No.4, pp. 26‐44.
50
15. Khan, H., Talib, F. and Faisal, M.N. (2015), ʺAn Analysis of the Barriers to the
Proliferation of M‐Commerce in Qatar: A Relationship Modeling Approachʺ,
Journal of Systems and Information Technology (JSIT), Emerald
Publishers, Vol. 17, No.1, pp. 54‐81.
49
16. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Assessing the awareness of
total quality management in Indian service industries: an empirical investigation”
Asian Journal on Quality (AJQ), Emerald Publishers, Vol.12, No.3, pp.
228‐243.
48
17. Khanam, S, Siddiqui, J. and Talib, F. (2013), “Role of Information Technology
in Total Quality Management: A Literature Review”, International Journal of
Advanced Research in Computer Engineering and Technology
(IJARCET), Vol. 2, No.8, pp. 2433‐2445
47
18. Talib, F. and Rahman, Z. (2015), “Identification and prioritization of barriers to
total quality management implementation in service industry: an analytic
hierarchy process approach”, The TQM Journal, Emerald Publishers, Vol. 27,
No.5, pp. 591‐615
47
19. Faisal, M.N. and Talib, F. (2016), “Implementing traceability in Indian food supply
chains: an interpretive structural modeling approach”, Journal of Foodservice
Business Research (JFBR), Taylor & Francis Publishing Group, Vol. 19,
No.2, pp. 171–196.
40
20. Talib, F., Rahman, Z. and Qureshi, M.N. (2012), ʺImpact of total quality
management and service quality in the banking sectorʺ, International Journal
of Telecommunications System and Management (IJTSM), Vol.1, No.1,
DOI: 10.4172/2167‐0919.1000102, OMICS Publications.
39
21. Talib, F., and Rahman, Z. (2012), “Total quality management practices in
manufacturing and service industries: A comparative study”, International
Journal of Advanced Operations Management (IJAOM), Inderscience,
Vol.4, No.3, pp. 155‐176.
38
22. Azam, M., Rahman, Z., Talib, F. and Singh, K.J. (2012), “A critical study of
quality parameters in health care establishment: Developing an integrated quality
model”, International Journal of Health Care Quality Assurance
38
- 36 -
(IJHCQA), Emerald Publishers, Vol. 25, No.5, 387‐402.
23. Talib, F., Rahman, Z. and Akhtar, A. (2013), “An instrument for measuring the
key practices of total quality management in ICT industry: an empirical study in
India”, Services Business Journal (SBUS), Springer Verlag Publishing
Group, Vol.7, No.2, pp. 275‐306,
36
24. Muzammil, M., Singh, P. P. and Talib, F. (2003), “Optimization of gear blank
casting process by using Taguchi’s robust design technique”, Quality
Engineering, American Society of Quality, Taylor and Francis Publishing
Group, Vol. 15, No. 3, pp‐351‐359.
30
25. Faisal, M.N. and Talib, F. (2016), ʺE‐government to m‐government: a study in
a developing economyʺ, International Journal of Mobile Communications
(IJMC), Inderscience Publishers, Vol. 14, No.6, pp. 568–592.
24
26. Talib, F., Azam, M and Rahman, Z. (2015), ʺService Quality in Healthcare
Establishments: A Literature Reviewʺ, International Journal of Behavioural
and Healthcare Research (IJBHR), Inderscience, Vol.5, Nos.1/2, pp. 1‐24.
23
27. Talib, F. and Ali, M. (2003), “Impact of quality circle – a case study”, Journal
of the Institution of Engineers (India), Vol. 84 (May), pp. 10‐13
17
28. Khanam, S, Siddiqui, J. and Talib, F. (2015), ʺModeling the TQM enablers and
IT resources in the ICT industry: An ISM‐MICMAC approachʺ, International
Journal of Information Systems and Management (IJISM), Inderscience,
Vol.1, No.3, pp. 195‐218.
17
29. Talib, F. and Rahman, Z. (2015), “An interpretive structural modeling for
sustainable healthcare quality dimensions in hospital services”, International
Journal of Qualitative Research in Services (IJQRS), Inderscience, Vol.2,
No.1, pp. 28‐46.
14
30. Talib, F., Rahman, Z. and Qureshi, M.N. (2013), “Survey on the usage of total
quality management tools and techniques in Indian service industries: an
empirical analysis”, International Journal of Quality and Innovation (IJQI),
Inderscience, Vol.2, No.2, pp.105–119.
14
31. Rahman, Z. and Talib, F. (2008), “A Study of Optimization of Process by using
Taguchi’s Parameter Design Approach” The IUP Journal of Operations
Management (IJOPMGMT), ICFAI University Press, Hyderabad, India
Vol. 7 No. 3, August, pp. 6‐17.
12
32. Khanam, S., Talib, F. and Siddiqui, J. (2014), ʺA Review of TQM and IT
Research in the ICT Industry: An Agenda for Futureʺ, International Journal of
11
- 37 -
Information and Computer Science (IJICS), Science and Engineering
Publishing Company, USA, Vol.3, No.1, pp. 64‐84, DOI:
10.14355/ijics.2014.03.009.
33. Talib, F., Rahman, Z. and Azam, M (2010), “Total Quality Management
Implementation in the Healthcare Industry: A Proposed Framework”,
Proceedings of Second International Conference on Production and
Industrial Engineering (CPIE‐2010) organized by Department of
Industrial and Production Engineering, Dr. B.R. Ambedkar National
Institute of Technology, Jalandhar (NITJ), Punjab, India during December
03‐05, pp. 1361‐1368.
11
34. Talib, F. and Rahman, Z. (2017), ʺModeling the barriers of Indian telecom
services using ISM and MICMAC approachʺ, Journal of Asia Business
Studies (JABS), Emerald Publishers, Vol. 11, No.2, pp. 188‐209.
11
35. Azam, M., Rahman, Z., and Talib, F. (2012), “Core quality and associated
supportive quality parameters/dimensions: a conceptual quality frame work in
health care establishment”, International Journal of Business Excellence
(IJBEX), Inderscience, UK, Vol.5, No.3, pp. 238‐277.
10
36. Talib, F. and Rahman, Z. (2014), ʺ Identification and adoption of total quality
management practices in Indian information and communication technology and
banking industries: an empirical studyʺ, Proceedings of 3rd International
Conference on Sustainability and Management Strategy (ICSMS‐2014),
organized by Institute of Management Technology (IMT), Nagpur, MH,
India in collaboration with California State University SAN BERNARDINO
and NEERI during March 21‐22, 2014
09
37. Khanam, S, Talib, F. and Siddiqui, J. (2015), ʺIdentification of TQM Enablers
and IT Resources for ICT Industry: A Pareto Analysis Approachʺ, International
Journal of Information Quality (IJIQ), Inderscience, Vol.4, No.1, pp. 18‐41.
09
38. Talib, F., and Rahman, Z. (2013), “Current health of Indian healthcare and
hospitality industries: a demographic study”, International Journal of
Business Research and Development (IJBRD), Science Target Publishers,
Ottawa, Canada, Vol.2 No.1, pp. 1‐17
08
39. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “An Empirical Study of
Barriers to TQM Implementation in Indian Service Industries”, Proceedings of
First International Conference on Industrial Engineering (ICIE 2011),
organized by Department of Mechanical Engineering, S.V. National
Institute of Technology, Surat, India in association with Indian Institution
of Industrial Engineering (IIIIE), NHQ‐Mumbai, India during
08
- 38 -
November17‐19, 2011, pp. 1072‐1084.
40. Khanam, S, Siddiqui, J. and Talib, F. (2016), ʺA DEMATEL approach for
prioritizing the TQM enablers and IT resources in the Indian ICT industryʺ,
International Journal of Applied Management Sciences and Engineering
(IJAMSE), IGI Global Publisher, Vol.3, No.1, pp. 11‐29.
07
41. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Analysis of total quality
management practices in manufacturing and service sectors”, Proceedings of
the First International Congress of Interdisciplinary Research and
Development (INRIT‐2011) in the Special Issue of the International
Journal of the Computer, the Internet and Management, Vol. 19 No. SP1,
organized by the Interdisciplinary Network of the Royal Institute of
Thailand under the Royal Patronage of HRH Princess Maha Chakri
Sirindhorn, Sapphire Rooms, IMPACT Exhibition Center, Muang Thong
Thani, Bangkok Metro, Thailand during 31 May ‐ 1 June 2011, pp. 57.1‐57.8.
07
42. Azam, M., Qureshi, M.N. and Talib, F. (2017), ʺQuality Evaluation of Health
Care Establishment Utilizing Fuzzy AHPʺ, International Journal of Service
Science, Management, Engineering, and Technology (IJSSMET), IGI
Global Publisher, Vol. 8, No.4, pp. 83‐120.
06
43. Talib, F., Rahman, Z. and Qureshi, M.N. (2012), “Total Quality Management
Practices in Indian Hospitality Industry: Some Key Findings from Survey”,
Proceedings of National Conference on Emerging Challenges for
Sustainable Business (ECSB‐2012), Department of Management Studies,
Indian Institute of Technology Roorkee, (IITR), India, June 1‐2, pp. 1866‐
1888.
05
44. Khanam, S., Siddiqui, J. and Talib, F. (2014), “A Theoretical Model on Total
Quality Management Enablers and Information Technology Resources for the
Information and Communication Technology Industry”, Proceedings of
International Conference on Research and Sustainable Business (ICRSB‐
2014), organized by Department of Management Studies, Indian Institute
of Technology Roorkee (IITR), Roorkee, UKh., India during March 08‐09,
2014, pp.831‐843.
05
45. Azam, M., Qureshi, M.N. and Talib, F. (2015), ʺAHP Model For Identifying
Best Health Care Establishmentʺ, International Journal of Productivity
Management and Assessment Technologies (IJPMAT), IGI Global
Publisher, Vol.3, No.2, pp. 34‐66.
05
46. Talib, F., Rahman, Z. and Qureshi, M.N. (2011), “Identifying the Key
Practices of TQM in Indian Service Industries: An Empirical Analysis”,
04
- 39 -
Proceedings of International Conference on Advances in Supply Chain
and Manufacturing Management (ASCMM 2011), organized by
Department of Industrial Engineering and Management, Indian Institute of
Technology Kharagpur (IITKhg), West Bengal, India during December 16‐
18, 2011.
47. Kumar, S. and Talib, F. (2017), ʺModelling the psychological and design
attributes of innovative product using interpretive structural modelingʺ,
International Journal of Intelligent Engineering Informatics (IJIEI),
Inderscience, UK, Vol. 5, No.2, pp. 139‐166
04
48. Faisal, M.N. and Talib, F. (2017), ʺBuilding ambidextrous supply chains in
SMEs: How to tackle the barriers?ʺ International Journal of Information
Systems and Supply Chain Management (IJISSCM), IGI Global
Publisher, Vol. 10, No.4, pp. 80‐100.
04
49. Talib, F., Asjad, M., Attri, R., Siddiquee, A.N. and Khan, Z.A. (2019),
ʺRanking model of total quality management enablers in healthcare establishments
using the Best‐Worst Methodʺ, The TQM Journal, Emerald Publishers, Vol.
31 No. 5, pp 790‐814.
04
50. Talib, F. and Rahman, Z. (2009), “Integrating Total Quality Management and
Ergonomics: an approach to Enhance Organization Performance”, Proceedings
of All India National Seminar on Ergonomics for Improved Productivity,
ZHCOET, AMU, Aligarh organized by The Institution of Engineers, India,
Nov. 21‐22, pp. 154‐162.
03
51. Khanam, S., Siddiqui, J. and Talib, F. (2014), ʺAssessing the awareness of total
quality management and information technology in the Indian information and
communication technology industry: An empirical analysisʺ, Proceedings of
18th Annual International Conference of the Society of Operations
Management (SOM‐2014) jointly organized by Department of
Management Studies, IIT Roorkee and ABV IIITM, Gwalior, India between
December 12‐14, 2014, pp. 834‐839.
02
52. Al‐Esmael, B., Talib, F., Faisal, M.N., and Jabeen, F. (2019), "Socially Responsible Supply Chain Management in Small and Medium Enterprises in the GCC", Social Responsibility Journal (SRJ), Emerald Publishers, Vol.15,
No.3, DOI 10.1108/SRJ‐09‐2017‐017.
02
53. Asjad, M. and Talib, F. (2018), ʺSelection of optimal machining parameters using
integrated MCDM approachesʺ, International Journal of Advanced
Operations Management (IJAOM), Inderscience, UK, Vol. 10, No. 2,
pp.109–129.
02
- 40 -
54. Khanam, S. and Talib, F. (2016), ʺStudy of TQM enablers and IT resources in
Indian ICT organizationsʺ, Proceedings of National Conference on
Mechanical Engineering – Ideas, Innovations & Initiatives (NCMEI3‐
2016), Department of Mechanical Engineering, Aligarh Muslim University,
Aligarh, India, April 16‐17, pp. 18‐26.
01
55. Khanam, S, Siddiqui, J. and Talib, F. (2013), “Identification of Total Quality
Management Enablers and Information Technology Resources in the Information
and Communication Technology Industry”, Proceedings of International
Conference on Smart Technologies for Mechanical Engineering (STME‐
2013), organized by Department of Mechanical, Production & Industrial
and Automotive Engineering, Delhi Technological University, Delhi, India
during October 25‐26, 2013, pp. 558‐567.
01
56. Talib, F. and Faisal, M.N. (2016), ʺAssessment of total quality management
implementation in Indian service industriesʺ, Proceedings of 2016 Annual
Meeting of the Decision Sciences Institute Conference (DSI‐2016), held
between Nov 19 ‐22 , 2016, th nd Austin, TX, USA.
01
57. Faisal, M.N., Talib, F. and Bhutta, M.K. (2019), ʺEnablers of Sustainable Solid
Waste Management System in Indiaʺ, International Journal of Environment
and Waste Management (IJEWM), Inderscience, UK, Vol. 23 No. 3, pp.
213‐237.
01
58. Khanam, S., Siddiqui, J. and Talib, F. (2015), ʺPrioritising the TQM Enablers
and IT Resources in the ICT Industry: An AHP Approachʺ, Proceedings of 17th
International Conference on Information Technology, Systems and
Management (ICITSM‐2015), and published in the International Journal
of Social, Behavioral, Educational, Economic and Management
Engineering (IJSBEEME) organized by World Academy of Science,
Engineering and Technology (WASET), Berlin, Germany during May 21‐
22, 2015, Vol.9, No.5, pp. 1668‐1675.
01
Total= 2312
DATED: (FAISAL TALIB)