“technology becomes progress, when it is for everyone”
Slideshow 2013
“technology becomes progress, when it is for everyone”
Company overview
Metoda S.p.A. is an Italian company with registered office in Salerno (Campania), a leading provider of solutions,
software projects and consultancy in Information & Communication Technology.
Operative on the Italian market since 1991, with over 350 professionals to give customers a qualified support for the
development in terms of efficiency and competitiveness.
The use of methods and tools to the highest scientific content made products and services Metoda among the most
competitive and technologically advanced in the industry, allowing you to maintain and consolidate positions of
prestige in the current technological landscape.
Continuous improvement and constant alignment state of the art technologies, with the assistance of our Research
Center accredited by MIUR and cooperation with some of the most prestigious Italian universities and research
institutes. Today they are part of Metoda S.p.A. companies and divisions that complement a wide range in the IT,institutes. Today they are part of Metoda S.p.A. companies and divisions that complement a wide range in the IT,
Industrial Automation, Public Administration and Renewable Energy.
In 2006 Metoda decides to undertake a major challenge to get in the graphic arts market, becoming the first and only
Italian manufacturer of Computer to Plate (CtP), immediately focusing on research and development. Allowing them to
innovate the basic concept of the external drum CtP with thermal laser.
Hence, was established the division CtpOptotec which is mainly engaged in research and development in
optoelectronics, with the design and manufacture of laser sources for applications not only in the field of Graphic Arts,
as well as the design and manufacture of components, laser module, electrical panels and chillers for CtP applications,
taking advantage of the knowledge of the industrial business unit.
www.metoda.it - www.ctpoptotec.com
In early 2011 the Metoda SpA, holder of projects, such as patents and trademarks "CtpOptotec" and "One", with the
aim to consolidate and integrate their skills with optoelectronic purely mechanical skills, establishes a joint venture
with the company Micromeccanica s.r.l.
Micromechanics s.r.l. work in the field of precision engineering since the early 80's and specializes in the design,
construction and maintenance of molds, machines, automated equipment and special series for the automotive and
other industries.
Through this collaboration is to bring the CtP One in the world market, paying attention to technological innovation
that can result from the union of two companies, the leading Italian and foreign markets, with regard to precision
engineering, opto-electronics, industrial automation and software.
The partnership, in October 2011 to launch series production of the new version of the CtP One "second generation"
PartnershipPartnership
The partnership, in October 2011 to launch series production of the new version of the CtP One "second generation"
version that includes major technical improvements in terms of mechanical, electronic components, the laser module
and functionality in terms of performance.
In November 2011 consolidates another major colaboration with the German company Marks3zet, (distributor of
materials and plates for waterless offset printing and in Germany and Europe), through this collaboration to date we
count five installations in Germany and one in France and by May 2012, there will be five other units of CtP One
"second generation", installed in Germany.
And at the beginning of 2013 it’s the moment of the “big step” through a Merge and Acquisition action, made from
somebody who believed in One Ctp since long time, Dr. Gert Sieger (CEO of Marks3zet) which in the previous year
bought also Konings GmbH (waterless processor manufacturer). So Konigs aquire the mayority of CtpOptotec business
unit from Metoda, and the new challenging mission officially starts…to became the prepress specialist.
www.micromeccanica.it - www.marks-3zet.de
CEO
Gert Sieger
Sales & Marketing & BD
Manager
Carmelo Roberto
COO
Carmelo Roberto
Isidoro Orabona
R&D Director
CFO
Claus Lang (CEO Konings)
Raffaella Parziale
Roberto Enea
Software & Service Manager
Felice Pignatiello
Optoeletronic manager
Pierpaolo Petrocelli
Project Designer
Gianluca Cafaro
Production Manager
Direct &Indirect Agents Dealers
Carlo CioffiOliver S.
Service Manager
(Marks3zet)
R&D Team
CtP One is the the high technology prepress machinery, completely produced in Italy, with the aim to be provided to
the world printing company market.
One 750 and One 1100 CTP will be more compact, available on the market, relative to the sizes 4 and 8 pages.
CtP One retains one of the key concepts of "modularity", it will be possible to switch from a single laser module, two
modules to double the speed, the resolution of the modules can vary from 2400 \ 2540 dpi to 4800 \ 5080 \ 7620 dpi,
One CTP can be purchased in manual and turned into a fully automatic version (with the addition of One Autoloader),
directly at the customer site.
At the exhibition "Drupa 2012" we’ve been presenting and launching systems CtP One 750 and One Autoloader
“Second Generation”.
Nowaday 40 units have been installed mainly in Italy and Germany and the rest of Europe.
CtPCtP OneOne –– SecondSecond GenerationGeneration
In January 2014 will be launched mass production of 60 to 100 CtP One, pointing to a growing presence on the world
market.
CtP One 1100 “Second Generation”
The high definition for the CTP One is a standard solution, indeed the ILH One thermal laser can be
configured with a resolution of 5080 dpi with no need for optional components. It 's also
interesting the predisposition to the management of two laser modules within the same CTP.
The proprietary design of the laser source and the development of the optical module yield an
"anti back-reflection", ie it allows to protect laser diodes from any reflections due to scratched
plates and \ or badly cut. For this reason Metoda One offers customers to extend, at very low cost,
the guarantee of the laser head ILH One over two years.
IDU – Unit steel drum with rotation up to
800rpm - pneumatic system for the handling of
magnetic bars gripping plate.
Ctp One 1100 – CTP version 8 pages -
productivity of 16/30 plates now - dimensions
1710 x 1210 x 1260 mm (WxDxH)
ILH – Thermal laser module, the most compact
on the market, 64 laser diodes, with a system of
"back reflection" for the reduction of faults to
the individual diodes.
CtP One 1100 - screenshot
The chiller module, project owner, requires no maintenance, has properties for heating and cooling
of the liquid of the circuit according to the use of the system in different environments with
temperature differences. It 's quiet, compact and covered for two years as the rest of the system.
The electronic board and the cabinet have been redesigned to improve system performance:
Improved speed of loading and unloading plate, increased performance in terms of acceleration \
deceleration of the drum during the writing and shifting of the laser to assume the position of work
or return to the position "zero", then most writing speed of the laser with a consequent increase in
productivity.
Easy access to the inside of the system to perform routine maintenance and repairs.
Solidity and compactness of the system, in addition to a pleasant design.
Company Name Contact Person City Country Ctp System Plates Workflow Installation Date
1 Printing House Buonaurio Vincenzo Casoria Italy ONE 1100 S1 Ipagsa Arte IP 21 Full giovedì 25 giugno 2009
2 Tipografia Guttenber Fabio Fisciano(SA) Italy ONE 1100 S1 Fuji ProT Full mercoledì 20 maggio 2009
3 Centro Stampa Calogero Puma Canicattì Italy ONE 1100 S1 Chinese plates Only Rip mercoledì 25 novembre 2009
4 La Grafica Calogero Lo Bello Modica Italy ONE 1100 S1 Vela Only Rip sabato 28 novembre 2009
5 Industria Grafica Sannita Antonio Longo Morcone Italy ONE 1100 S1 Ipagsa Arte IP 21 Full mercoledì 29 aprile 2009
6 Modulgraf Emiliano Pomezia Italy ONE 1100 S1 Fuji ProT2 /Thermal Direct Full venerdì 13 maggio 2011
7 A.I. Communications Dario D'Andria Isernia Italy ONE 1100 S1 Ipagsa Arte IP21 Full mercoledì 10 marzo 2010
8 Stampa Sud Franco Nero Lamezia Terme Italy ONE 1100 S1 AGFA LT2 Full lunedì 1 giugno 2009
Reference List 1/2
8 Stampa Sud Franco Nero Lamezia Terme Italy ONE 1100 S1 AGFA LT2 Full lunedì 1 giugno 2009
9 Alfaquest Erik Bowman Utrecht Holland ONE 1100 S1 Fuji Pro-T2 Full venerdì 17 luglio 2009
10 Paritet Sergey Isakov Moscow Russia ONE 1100 S1 Kodak, Chinese Demo venerdì 2 ottobre 2009
11 Alfaquest Erik Bowman Utrecht Holland ONE 750 S1 Fuji Pro-T2 Only RIP martedì 15 giugno 2010
12 Mark3zet Karol Wolnikosky Muhleim(school) Germany ONE 1100 S1 Toray Full venerdì 2 luglio 2010
13 Cybak Industries Group Bobak Abedini Teheran Iran ONE 1100 S1 All Only RIP giovedì 12 luglio 2012
14 Mark3zet Karol Wolnikosky Frankfurt(Mahnillen) Germany ONE 1100 S1 Toray Only RIP venerdì 5 agosto 2011
15 Mark3zet Karol Wolnikosky Le Pallet (Bretecher) France ONE 750 S1 Toray Only RIP giovedì 17 marzo 2011
Company Name Contact Person City Country Ctp System Plates Workflow Installation Date
16 Mark3zet Karol Wolnikosky Speicher(Stuco) Germany ONE 1100 S1 Toray Only RIP venerdì 13 maggio 2011
17 ING Machinery Ing. Leng Phnom Penh Cambodia ONE 1100 S1 All Rip + Imposition venerdì 30 novembre 2012
18 Mark3zet Karol Wolnikosky Stuttgart(Jahn) Germany ONE 750 S2 Toray Only RIP mercoledì 16 novembre 2011
19 Tipografia Fusco Ciro Fusco Salerno Italy ONE 1100 S1 Thermal Direct Full martedì 27 settembre 2011
20 Arma dei Carabinieri Lt De Matteo Velletri(RM) Italy ONE 1100 S1 Thermal Direct Full giovedì 19 gennaio 2012
21 Tipografia Zaccaria Gianni Pipola Napoli Italy ONE 1100 S2 IpagsaOneRip+CIP3+Fle
xo mercoledì 21 marzo 2012
22 Mark3zet Karol Wolnikosky Hosena (Clever) Germany ONE 750 S2 Toray None venerdì 22 giugno 2012
23 Modulgrafica Pharma Andrea Coletta Latina Italy ONE 1100 S2 All Only RIP giovedì 31 gennaio 2013
Reference List 2/2
24 Printgraph Luigi Casella Milano Italy ONE 1100 S2 All Demo domenica 20 maggio 2012
25 Editrice Cerbone Carlo Cerbone Cardito(NA) Italy ONE 1100 S1 All Rip + Impo lunedì 4 marzo 2013
26 Statistical Bureau of B. Wahid Islam Dacca Bangladesh ONE 1100 S2 All Full mercoledì 29 maggio 2013
27 Mark3zet Karol Wolnikosky Albrechts (CDA) Germany ONE 1100 S2 Toray Rip mercoledì 3 aprile 2013
28 Mark3zet Karol Wolnikosky Mulheim Germany ONE 1100 S2 Toray Rip Marks3zet - did handle
29 Mark3zet Karol Wolnikosky Mulheim Germany ONE 1100 S2 Toray Rip Marks3zet - did handle
30 Mark3zet Karol Wolnikosky Mulheim Germany ONE 1100 S2 Toray Rip To be installed within August\Sept 2013
30-40 Mark3zet Karol Wolnikosky Mulheim Germany5 Units ONE 1100 S2 +
5 Units One 750 S2 Toray Rip To be installed within Sept\Dic 2013
A permanent growing path1. New production site - The new site for the series production of the new version of the CTP One at the
headquarters of Micromeccanica, and the other at the Production Facilities of BTPtecno, both in
Salerno, with its large manufacturing and modern precision machinery, will enable us to improve the
mechanical quality of the CTP One and above will allow us to produce in series. And finally lunch a
batch production of 60-100 units on 2014.
2. Training for technical staff inside and outside the company, in order to "share" the knowledge of the
One CTP system and facilitate assistance to clients, helping to contain maintenance costs. Continuos
sharing knowledge program are going on, with dealers and agents.
3. Consolidation of distribution network abroad, represented by our dealer mayor reference and
partner "Marks3Zet" (www.marks-3zet.de); we now cover also Netherland, Russia, France, Spain, Iran,
Bangladesh and Turkey.
4. Continuous development of the CTP One in functional and operational, with the development of UV
laser module, for the recording of conventional plates, which released, customers who have
purchased CTP One can make the replacement of the thermal laser module. Flexo Ctp, Newspaper Ctp
and other projects are some of the “working in progress” project in our laboratories.
5. Important partnership development
Either from technological than distribution point of you, the target it’s always to find the right partner
either to improve the system technology concerning prepress equipment researched and developed
than to look for the right partner to introduce and distribute our technology in new countries.
Contacts
CtpOptotec GmbH i.G.
Headquarter
Lahnstrasse 38, 45478 Mülheim
Germany
Phone: +49 208 999 46-0
Fax: +49 208 999 46-29
R&D Production &Demo Centre
Via Palazziello s.n.c. 80040 Volla
(Napoli)
Italy
Phone: +39 081 73 40 502
Fax: +39 081 73 40 622
Further Demo Centre
In Milan at Printgraph Facilities & Mullheim at Marks3zet Facilities