Transcript
Page 1: Craftmaster Interior Doors

Cashal 6´8´́

Conmore 6´8´́Corvado 6´8´́

Interior Door Catalog

We’re door people.

craftmasterdoors.com

Crossmore 6´8´́

®

Page 2: Craftmaster Interior Doors

2

Louver-over-louver 6´8´́

Select the door that is right for you.

Molded DoorsMolded doors are made from engineered wood to provide beauty and low maintenance at a superior value. CraftMaster molded interior doors are available with either a wood grain texture or smooth finish in over ten different panel designs. They add style and warmth to your home, while resisting shrinking, swelling, cracking and joint separation.

•Coveredbya5-year limited warranty.

Stile and Rail Doors Stile and rail doors combine cutting edge technology andold-fashionedcraftsmanship.Availableinarange of heights and widths, CraftMaster stile and rail doors come in a variety of classic French door options and louver panel designs.

•Coveredbya2-year limited warranty.

Flush DoorsCraftMaster flush doors offer a clean, contemporary look and unlimited finish options atagreatvalue.ChoosefromPre-Finished,Birch,Okoume/Lauan, Oak or Primed Hardboard.

•Coveredbya2-year limited warranty.

CraftMaster Offers a Complete Selection of Interior Doors to Fit any Interior

Cashal 6´8´́

Oak Flush - Unfinished 6´8´́

Page 3: Craftmaster Interior Doors

Product Page

CraftMaster Interior Door Catalog Introduction 2

Green Product Information Molded Doors 4Stile and Rail Doors 5

Molded DoorsMolded Doors Introduction 6

Size Chart 7 Crossmore 8 Conmore 8 Cashal 9 Corvado 9 Caiman 10 Carrara 10 Cremona 10 Coventry 11 Carmelle 11 Clermont 11 Classique 12 Reflection Series Mirror Doors 12 Colonist 13 Colonist Commercial 13 Carolina 13 ColonistPre-FinishedSeries 14-15

Stile and Rail Doors Louver Doors 16 French Doors 17

Flush Doors 18-19

Warranty 20

Finishing Recommendations - Molded Doors 21

CMI Company Information 22-23

3

We’re door people.

Table of Contents

We’re door people.

Page 4: Craftmaster Interior Doors

CraftMaster Green DoorsBuildgreenwhilemaintainingthebeautyandfunctionalityofmoldedinteriordoors.CraftMasterGreenDoorsresistshrinking, swelling, cracking and joint separation.

How to Specify the CraftMaster Green Door Design: AnyofthedesignsintheCraftMasterlineofmoldedinteriordoors.†

Core: StandardhollowcoreorsolidcorewithGreenLite™ fiberboard door core. Stiles and Rails: Finger joint or clear wood. Lock Block: Wood. Thickness: Either 13/8˝ or 13/4 .̋ Sizes: For available sizes, see the size chart on page 7.

Features of the CraftMaster Green Door3Sustainable Materials

CraftMastermoldeddoordesigns,usedtomakeCraftMasterGreenDoors,aremadefromwoodthatisofnocommercial timber value and is the byproduct of other operations, not old growth timber.

Wood Sources: •Sawmillchips:generatedasresidualwastefromsawmilloperations.•Fieldchips:residualsfromfieldchippingoperationsoftreetopsandleftoverwood.Ifthiswoodisnotusedin

manufacturing operations, it rots or is sent to landfills. The removal of this wood source allows mature trees to grow. Field chips are a byproduct of sound logging practices.

•Allwoodcomesfromanareawithina200mileradiusofTowanda,PA.•CMIuses100%northernhardwoodswhichincludesmaple,beech,oakandotherspecies.

3Recycled Content •HollowcoreCraftMasterGreenDoorscontainaminimumof56%pre-consumerrecycledcontent.•SolidcoreCraftMasterGreenDoorscontainaminimumof70%pre-consumerrecycledcontent.•CraftMastermoldeddoordesignscontainaminimumof70%pre-consumerrecycledcontent.This

iscertifiedbyScientificCertificationSystems,certificatenumberSCS-MC-01801.

3No Added Urea Formaldehyde •CraftMastermoldeddoordesigns(facings)complywiththeCaliforniaAirResourcesBoard’s

(CARB)AirborneToxicControlMeasure(ATCM)93120Phase2formaldehydeemissionlimitsforcompositewoodascertifiedbytheCompositePanelAssociation(CPA),athirdpartycertifier(TPC-1).CraftMastermoldeddoordesignshavedemonstratedformaldehydeemissionsequivalentto background levels found in the environment.

•CraftMastermoldeddoordesignshavenoaddedureaformaldehyde.ThisiscertifiedbyScientificCertificationSystems,certificatenumberSCS-MC-01802.

3Low VOC Primer and Adhesives •CraftMasterproductsareprimedwithalowVOCprimer.Thisprimerisamongthemost

environmentally preferable of all coatings available. •TheadhesivesusedinCraftMasterGreenDoorshaveultralowVOCemissions.

3GreenLite Core Features •Sustainablecoreprovidestheheft,weightandsound-deadeningpropertiesofasolidwooddoor.•MadeusingwoodobtainedfromforestlandsthatarecertifiedbySustainableForestryInitiative®(SFI®).•Containspre-consumerrecycledcontent.•ProducesverylowformaldehydeandVOCemissions(exceedsCARBstandards).† Solid core Crossmore and Conmore doors use an MDF core and are not included in the CraftMaster Green Door specification. Due to the blocking used, Reflection Series mirror doors are not included in the CraftMaster Green Door specification.

CraftMaster Interior Doors are Green Products

4

SCIENTIFIC CERTIFICATION SYSTEMSSCS-MC-01802

NO ADDED UREA FORMALDEHYDE

SCIENTIFIC CERTIFICATION SYSTEMSSCS-MC-01801

Minimum 70% Recycled Content

Page 5: Craftmaster Interior Doors

Smooth finish, clean designs

We’re door people.

Made from Sustainable Material

Stile and Rail Doors

3Sustainable Materials •WoodusedtomakeCraftMasterstileandraildoorsis

harvested from private forestlands that employ sustainable forestry practices.

•Usingfastergrowingtreesensuresoldgrowthforestsremainfor future generations.

3Reduce the Greenhouse Effect through Harvesting•Theactivegrowingandharvestingoftreestomake

CraftMaster stile and rail doors helps to store carbon dioxide and reduces the greenhouse effect.

•Treesabsorbcarbondioxideandstoreitintheirwoodfiberduringtheiractivegrowthperiod.Astreesmature,theirability to store the carbon dioxide diminishes.

3Maximum Material Utilization•Nearly100%ofthewoodresourcesusedtomake

CraftMaster stile and rail doors are utilized, eliminating landfill waste.

- Sawdustiscollectedandrecycledforuseasanimalbedding.

- Scrapmaterialisutilizedasarawmaterialatparticleboardandmediumdensityfiberboard(MDF)plants.

- Anoptimizerminimizeswasteduringwoodextraction.This machine, coupled with an innovative process, reduces waste by determining the cut which will produce the highest yield for the wood.

5

Page 6: Craftmaster Interior Doors

Madefrommoldedhigh-densityfiberboard,CraftMastermolded interior doors resist shrinking, swelling, cracking and joint separation.

Specify the Door that Makes the Grade•CraftMastermoldedinteriordoorsareroutinelytested

against 14 different criteria including water resistance, adhesion and overall durability to ensure consistent product quality.

•AlldoorsareavailableprimedwithalowVOCprimerandare ready to paint. For ease of installation, the Colonist Pre-FinishedSeriesisavailable.

•CraftMastermoldedinteriordoorscanbespecifiedin13/8˝ and 13/4˝ thicknesses.

•Most13/4˝ thick CraftMaster molded interior doors can be manufactured to meet20-,45-or60-minutefireratingsasper Intertek WH specifications.

•Coveredbya5-yearlimitedwarranty.

Make a Solid Choice•Fortheheftandsound-deadeningpropertiesofsolid

wood, specify solid core construction.

•CraftMastermoldedinteriordoorscanbespecifiedforeither hollow or solid core construction and with either finger joint or MDF stiles and rails.

Tough on the Inside•ACraftMastermoldeddoordesignismadefroman

engineered wood fiber mat that is molded under intense heatandpressureintoan1/8˝(3.2mm)thicksheetofhigh-densityfiberboard.Theresultassuresconsistentquality from door to door, room to room, and home to home.

For the full line of interior doors, visit craftmasterdoors.com.

CraftMaster Molded Interior Doors

Caiman® Carmelle® Carrara®

Cashal® Classique® Clermont®

Cremona®

Colonist® Conmore™ Corvado®

Coventry® Crossmore® Reflection Series Mirror Door

Passage and Bifold Designs

6

Page 7: Craftmaster Interior Doors

Variety of Designs and Sizes

7

We’re door people.

Colonist Carmelle Caiman Cashal Conmore Crossmore Cremona Reflection Series

P a S S a G e S i z e S B i F o l D S i z e S

1́ 0´́ 1́ 2́ ́ 1́ 3́ ́ 1́ 4´́ 1́ 6´́ 1́ 8´́ 2´0´́ 2´2́ ́ 2´4´́ 2´6´́ 2´8´́ 2́ 10´́ 3´0´́ 1́ 6´́ 2´0´́ 2´4´́ 2´6´́ 2´8´́ 3´0´́ 4´0´́ 5´0´́ 6´0́´

Caiman Smooth 6́ 8˝, 7́ 0˝ n n n n n n n n n n n n n n n * n n n nCaiman Smooth 8́ 0˝ n n n n n n n n n Carmelle Textured 6́ 8˝ n n n n n n n n n n n n n n n n n

Carolina Textured 6́ 8˝ n n n n n n n n n n n n n n n n n n n n n

Carrara Smooth 6́ 8˝, 7́ 0˝ n n n n n n n n n n n n n n n n n n n n n

Carrara Smooth 8́ 0˝ n n n n n n n n n n n n n n n n n n n n n

Cashal Smooth 6́ 8˝, 7́ 0˝ * * * * n n n n n n n n n n n * n n n n

Cashal Smooth 8́ 0˝ * * * * n n n n n n n n n n n * n n n n

Classique Textured 6́ 8˝ n n n n n n n n n n n n n n n n n n n n n

Clermont Textured 6́ 8˝ n n n n n n n n n n n n n n n n n n n n

Colonist Textured 6́ 8˝ n n n n n n n n n n n n n n n n n n n n n n

Colonist Smooth 6́ 8˝ n n n n n n n n n n n n n n n n n n n n n

Colonist Textured 7́ 0˝ n n n n n n n n n n n n n n n

Colonist Smooth 7́ 0˝ n n n n n n n n n n n n n n n n n

Colonist Textured 8́ 0˝ n n n n n n n n n n n n n n n

Colonist Smooth 8́ 0˝ n n n n n n n n n n n n n n n n n n n n n

Colonist Commercial Smooth 6́ 8˝, 7́ 0˝ n

ColonistPre-FinishedTextured6́ 8˝ n n n n n n n n n n n n n n n n n n n n n

Conmore Smooth 6́ 8˝, 7́ 0˝ n n n n n n n n n n n * n n n n

Corvado Smooth 6́ 8˝, 7́ 0˝ * * * * n n n n n n n n n n n * n n n n

Corvado Smooth 8́ 0˝ * * * * n n n n n n n n n n n * n n n n

Coventry Textured 6́ 8˝ n n n n n n n n n n n n n n n n n n n n n

Coventry Smooth 6́ 8˝, 7́ 0˝ n n n n n n n n n n n n n n n n n n n n n

Coventry Smooth 8́ 0˝ n n n n n n n n n n n n n n n n n n n n n

Cremona Smooth 6́ 8˝, 7́ 0˝ * * * * n n n n n n n n n n n * n n n n

Cremona Smooth 8́ 0˝ n n n n n n n n n n n n n * * * * * * * *Crossmore Smooth 6́ 8˝, 7́ 0˝ n n n n n n n n n n n * n n n n

Reflection Series Textured 6́ 8˝ n n n n n n n

* Check with your supplier for availability. Trimming CraftMaster molded interior doors will void the warranty.

Page 8: Craftmaster Interior Doors

8

Crossmore®

Smooth finish

•Patentedandproprietary.CoveredbyU.S.PatentD616,117.

•Createdthroughadvancedpaneltechnologytoproduce a truly authentic molded, flat panel door.

•Crossmoreisacontemporarydoorthatfunctionsbeautifully in renovated bungalows, sleek, modern homes and everything in between.

•Availablein6́ 8 ̋and7́ 0 ̋passageandbifoldsizes.

Conmore™

Smooth finish

•Theonlytrulyauthenticmolded,flatfive-paneldoor.

•Combinesaclassicpaneldesignwithasmooth-surfaced elegance

•Availablein6́ 8 ̋and7́ 0 ̋passageandbifoldsizes.

Flat Panel Door Series

Shownabove:DetailoftheCrossmoreflatpaneldoor.

Page 9: Craftmaster Interior Doors

9

Cashal®Smooth finish

•Archtop,two-panelplankdoorthatbringscharacter and charm to any room.

•Combineselementsofhistoricaldoordesignwithmodernfunctionality,makingitwell-suitedfor many home styles and décors.

•Availablein6́ 8 ,̋7́ 0 ̋and8́ 0 ̋passageandbifold sizes.

Smooth finish, clean designs

We’re door people.

Plank Door Series

Corvado®

Smooth finish

•Squaretop,two-panelplankdoorwithasmooth finish.

•Offersthewarmthandrichnessofatraditionalplank door with a distinctive groove and modified sticking pattern for added detail.

•Patentedandproprietary.CoveredbyU.S.Patent D541,947.

•Availablein6́ 8 ,̋7́ 0 ̋and8́ 0 ̋passageandbifold sizes.

Shownleft:DetailoftheCashalarchtop,two-panelplankdoor.

Shownleft:DetailoftheCorvadotwo-panelplankdoor.

Page 10: Craftmaster Interior Doors

10

Smooth Finish, Clean Designs

Cremona®

Smooth finish

•Bold,sleekandstylish,thisdoorbrings chic to any room.

•Availablein6́ 8 ,̋7́ 0 ̋and8́ 0˝passage and bifold sizes.

Carrara®

Smooth finish

•Austereyetwelcoming,thisuncluttereddesignhaslimitless appeal.

•Availablein6́ 8 ,̋7́ 0 ̋and8́ 0 ̋passageandbifoldsizes.

Caiman®

Smooth finish

•Two-panel,truearchdesignthatofferselegantsimplicity.

•Availablein6́ 8 ,̋7́ 0 ̋and8́ 0 ̋passageandbifoldsizes.

Page 11: Craftmaster Interior Doors

11

Coventry®

Oak wood grain texture or smooth finish

•Aclassicdesignthathasbothauniquecharacter and a universal appeal.

•Texturedfinishavailableinstandard6́ 8˝passage and bifold sizes.

•Smoothfinishavailableinstandard6́ 8 ,̋7́ 0 ̋and 8´0 ̋passage and bifold sizes.

Carmelle®

Oak wood grain texture

•Archedtopslendastorybookflairtothisfour-panelclassic.

•Availableinstandard6́ 8 ̋passageandbifold sizes.

Clermont®

Oak wood grain texture

•Asimple,straightforwarddesignthatisversatile enough to fit in to any décor.

•Availableinstandard6́ 8 ̋passageandbifold sizes.

Smooth finish, clean designs

We’re door people.

Rich Textured Designs

Page 12: Craftmaster Interior Doors

12

Classique® Oak wood grain texture

•Bold,sleekandstylish,thisdoorbringschictoanyroom.

•Availableinstandard6́ 8 ̋passageandbifoldsizes.

Rich Textured Designs

CraftMaster®

Reflections SeriesTexture finish

•Theonlydooravailablewithamirrorononesideandachoice of a wide range of panel designs on the other.

•ChoosefromCoventry,Classique,Carmelle,andClermontwith an oak wood grain texture finish or Colonist with a pine wood grain texture finish.

•Uniquedesignsavesspacewithoutsacrificingstyle,addingconvenience and value to any home.

•Offeredinstandard6́ 8 ̋height and in seven widths.

Availableinthesedesigns:

Coventry Classique Carmelle Clermont Colonist

Page 13: Craftmaster Interior Doors

13

We’re door people.

Colonist Offers Traditional Style

Colonist®

Pine wood grain texture or smooth finish

•Distinguishedbymorethanaquartercentury of precise craftsmanship, this classic design rises above all imitators.

•Availablein6´8˝,7´0˝and8´0˝passageand bifold sizes.

Colonist®

CommercialSmooth finish

• Ideal for hotels, healthcare facilities and office buildings.

•Fitsmoststandardcommercialhardware,includingdoor closers, exit devices, kick plates, and card and mortise locks.

•Availablefor3́ 0˝openingsin6́ 8 ̋and7́ 0 ̋heights.

Carolina® Pine wood grain texture

•Aunique,quarter-roundprofileaddsastatelyqualitytotheclassicsix-paneldesign.

•Availableinstandard6́ 8 ̋passageandbifoldsizes.

Shownleft:DetailoftheCarolinaquarter-roundprofile.

Page 14: Craftmaster Interior Doors

Colonist Pre-Finished in CraftMaster Mesa

14

Colonist Pre-Finished Series

Colonist Pre-Finished in CraftMaster Canyon

Enjoy the utmost in beauty and convenience with the Colonist Pre-Finished Series.

•ColonistPre-Finishedmoldedinteriordoorsprovideinstantelegance and are available in four colors with an oak wood grain textured finish, as well as white with a pine wood grain textured finish.

•Availableinstandard6´8˝passageandbifoldsizes.

•ChoosefromthesePre-Finishedcolors:

•Duetotheuseofaprotectivetopcoatsealer,Pre-Finisheddoorscannot be repainted without fully removing the topcoat sealer.

CraftMaster CraftMaster Natural® Canyon

CraftMaster CraftMaster Mesa Harvest®

CraftMaster White

Page 15: Craftmaster Interior Doors

Colonist Pre-Finished in CraftMaster Natural

Colonist Pre-Finished in CraftMaster Harvest

Colonist Pre-Finished in CraftMaster White

15

We’re door people.We’re door people.

Colonist Pre-Finished Series

Shownabove:CloseupoftheoakwoodgraintexturedfinishintheCraftMasterNaturalshade.

Shownabove:Closeupoftheoakwoodgraintextured finish in the CraftMaster White.

Page 16: Craftmaster Interior Doors

CraftMaster Stile and Rail Doors

Louver Passage Doors

•Allowsforopenventilationwhilepreservingprivacy. Ideal for bathrooms, bedrooms and closets.

•Louver-over-louveravailableinbothclearandprimed.

•Availableinstandard6́ 8 ̋passagesizes.

Louver Pine Bifold DoorsSolid pine construction

•Louver-over-louveravailableinbothclear and paint grade.

•Availableinstandard6́ 8 ̋passagesizes.

•Checkwithyoursupplierforavailability.

Stileandraildoorscombinecuttingedgetechnologywithold-fashionedcraftsmanship.Availableinarangeofheightsandwidths,CraftMasterstile and rail doors come in a variety of classic French door options and louver panel designs.

•Coveredbya2-yearlimitedwarranty.

16

Page 17: Craftmaster Interior Doors

CraftMaster Stile and Rail Doors

We’re door people.

Clear Pine French Doors

•Offeredin1-Lite,5-Lite,10-Liteand15-Lite.

•Availableinstandard6́ 8˝passage height.

•Checkwithyoursupplierforavailability.

Primed Pine French Doors

•Offeredin1-Lite,5-Lite,6-Lite,10-Lite,12-Lite,15-Liteand18-Litedoors.

•Availableinstandard6́ 8˝and8́ 0˝ passage heights.

•Checkwithyoursupplierforavailability.

Oak French Doors are available by special order. Check with your supplier.

1-Lite

5-Lite 10-Lite 15-Lite

6-Lite* 12-Lite* 18-Lite*

*Available8´0˝only

17

Page 18: Craftmaster Interior Doors

18

CraftMaster Flush Doors

Flush doors offer a clean, contemporary look for interior spaces and unlimited finishing options at a great value. Choose from Pre-Finished,Birch,Okoume/Lauan,OakorPrimedHardboard.

•Mostsizescanbespecifiedinholloworsolidcoreconstruction.

•Availablein6́ 8˝,7́ 0˝and8´0˝passageandbifoldsizes.

•Coveredbyatwo-yearlimitedwarranty.

HardwareBifolddoorsuseHomeDécorBF30SeriesHardware,shownatright.BF50SeriesHeavyDutyHardwareandJohnsonHardware 1825 Series are also available.

Pre-Finished Flush Doors

•Availablein6́ 8 ,̋7́ 0 ̋and8́ 0 ̋passagesizes.

•Checkwithyoursupplierforavailablecolors.

•Availablein20-,45-or60-minutefireratingsasper Intertek WH specifications.

•Offeredinclearwood,fingerjointorMDFstilesand rails.

Pre-Finished Flush Door – Prairie Oak

Page 19: Craftmaster Interior Doors

19

CraftMaster Flush Doors

We’re door people.

Birch Flush Doors

•Availablein6́ 8 ,̋7́ 0 ̋and8́ 0 ̋passageandbifoldsizes.

•PremiumgraderotarycutnaturalBirch.

•2-plyskinswithanMDFback.

•Offeredinclearwood,fingerjointorMDFstilesandrails.

•Availablein20-,45-,60-or90-minutefire ratings as per Intertek WH specifications.

Okoume/Lauan Flush Doors

•Availablein6́ 8 ,̋7́ 0 ̋and8́ 0 ̋passageandbifoldsizes.

•GradeArotarycutOkoume/Lauan.

•2-plyskinswithanMDFback.

•Offeredinclearwood,fingerjointorMDFstilesandrails.

•Availablein20-,45-,60-or90-minutefire ratings as per Intertek WH specifications.

Oak Flush Doors

•Availablein6́ 8 ,̋7́ 0 ̋and8́ 0 ̋passageandbifoldsizes.

•AA/ABplainslicedRedOak.

•2-plyskinswithanMDFback.

•Offeredinclearwood,fingerjointorMDFstilesandrails.

•Availablein20-,45-,60-or90-minutefire ratings as per Intertek WH specifications.

Primed Hardboard Flush Doors

•Availablein6́ 8 ,̋7́ 0 ̋and8́ 0 ̋passageandbifoldsizes.

•PrimedhardboardorprimedMDFwillbesuppliedatmill option.

•OfferedinfingerjointorMDFstilesandrails.

•Availablein20-,45-,60-or90-minutefire ratings as per Intertek WH specifications.

Oak Flush Door - Unfinished

Okoume/Lauan Bifold Door - Stained

Page 20: Craftmaster Interior Doors

20

Products Covered: CraftMaster Molded, Flush and Stile & Rail Interior Doors, which have been constructed to standard specifications including solid core, semi solid and hollow core constructions manufactured by CraftMasterManufacturing,Inc.(CMI).

CMI warrants that the door will be free of manufacturing defects in material andworkmanshipforthefollowingperiodsfromdateoforiginalpurchase:five(5)yearsformoldedinteriordoorsandtwo(2)yearsforflushandstileandrailinterior doors. This warranty only applies to the original installation of the door.

Note:Fieldtrimmingofbifoldandpassagedoorswillvoidthewarranty.

For CraftMaster stile and rail interior doors, normal characteristics of kiln dried wood include, but are not limited to, minor swelling and shrinking of parts made from wood, raised grain, minor pitch pockets, natural grain andcolorvariations.Naturalexpansionandcontractionofwoodoccurswith variations in climatic and atmospheric conditions such as humidity and temperature and is not a defect hereunder. Doors within the tolerances described below shall also not be deemed defective.

GENERAL PROVISIONS AND LIMITATIONSIf a defect occurs, CMI, at its discretion and maximum, will furnish a replacement door, repair the door or refund the original purchase price.

CMI WILL NOT PAY THE COSTS OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENT DOORThiswarrantydoesnotcoverthefollowing:

(a)Anydefectsinthecoatingsorfieldfinishesonthedoorandaccessories.(b)ColorvariationortheappearanceofhighglossonPre-Finishedmolded

interior doors.(c)Naturalvariationinthecolorandtextureofwoodveneers.(d)Doorslargerthan3´0˝x8´0˝orgreaterthatwarp.(e)Doorsover7´0˝inheightinstalledwithfewerthan4hinges.(f) Bowormisalignmentintheframeofthejambashung.(g)Normalwearandtear.(h)Doordamageorfailurearisingfromimproperuse,handlinginstallation,

or lack of adequate care and maintenance.(i) Door damage or failure arising from alteration or repair of doors altered

by persons other than CMI representatives or authorized service agencies.(j) Doorswithfacegroovingintoorthroughcrossbandsonwoodveneers.(k)Doorsmadewithdifferentmaterialsoneitherside.(l) Incompatibilityofhardwarewithaparticulardoorconstruction.(j) Anynon-standardspecificationdoors.

To receive warranty service, claims must be made in writing to CMI during the warranty period and within 60 days of discovery of the defect. Claims shouldbemailedto:

CMICraftMasterDoorDivision,Attn:ClaimsDepartment680ScattergoodDr.NW,Christiansburg,VA24073

Afterreceivingsuchnotice,CMImustbegivenareasonableopportunitytoinspect and verify the claim. To expedite the claims process, please provide thefollowinginformation: 1.Descriptionofdoor.

2.Nameandaddressofowner. 3. Proof of sale. 4. Detailed explanation of defect.

DISCLAIMER OF IMPLIED WARRANTIES AND LIMITATIONS OF REMEDIESThe limited warranty set forth above state the entire liability of CMI for any productdefects.Nopersonisauthorizedtomakeanyrepresentationorwarranty on behalf of CMI except as expressly set forth above, and any such statement shall not be binding on CMI. Except as expressly set forth above, CMI makes no warranty of any kind, express or implied, including, without limitation, any implied warranty of merchantability or fitness for a particular purpose.

CMI shall have no liability, under this warranty or otherwise, for any incidental or consequential damages in connection with any sale of CMI doors.

The foregoing disclaimer of implied warranties shall not be applicable tosalessubjecttotheMagnuson-MossWarrantyAct,inwhichcasetheduration of any implied warranties shall be the duration of the limited warranty or such shorter duration as provided under applicable state law. In addition, some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. These limited warranties give the claimant specific legal rights, and you may also have other rights which may vary from state to state.

TOLERANCES1.Width,height,andthicknessdimensions:+/-1/16˝.

2.Squareness(asmeasuredbydifferenceofdiagonals):<=1/8˝.

3. Maximum warp of 1/4˝, unless storage, handling or finishing can beshowntocausewarp.Theterm‘warp’shallincludebow,cup,and twist. Measuring the amount of warp present in a door shall be done by placing a straight edge, taut wire, or string on the suspectedconcavefaceofthedooratanyangle(i.e.horizontally,vertically,diagonally)withthedoorinitsinstalledposition.Themeasurement of bow, cup, and twist shall be made at the point of maximumdistancebetweenthebottomofthestraight-edge,tautwire or string and the face of the door.

4.Stile,rail,andcoreshow-through(telegraphing)onflushfacesshallnot be considered a defect unless the faces of the door vary from a true plane in excess of 1/100˝ in any three inch span.

FINISHING OPTIONS FOR CRAFTMASTER STILE & RAILINTERIOR DOORSYou may choose from a wide variety of stains or paints to finish CraftMaster stile and rail doors. Paint dealers have a broad selection of color chips on hand to demonstrate the look that can be achieved when finishing CraftMasterstileandrailinteriordoors.Applyeitheroil-basedorlatexresin-basedpaintsoveranoil-basedprimer(latexorwaterbaseprimermaycontributetoraisedgrain).Takecareinfollowingthesefinishinginstructions.BesuretoevaluatetheconditionsyourCraftMasterstileandraildoorwillendure, such as direct exposure to severe climates, before deciding on the specificfinishtouse.FinishesarenotcoveredbyCMI’swarranty.

HANDLING, JOB FINISHING AND INSTALLATION INSTRUCTIONS FOR INTERIOR DOORS NotethatCMI’swarrantyexcludesalldamageorfailureresultingfromfailuretostrictlyfollowtheseinstructions:

1.Allsixsidesofthedoormustbefinishedwithsuitabletopcoatorsealer before final use.

2.Deliverdoor(s)tobuildingsiteafterplasterorcementisdry.Ifdoors are stored at job site for more than one week, all edges should be sealed.

3. Handle with clean gloves and do not drag doors across one another or across other surfaces.

4. Store doors flat on a level surface in a dry, well ventilated building. Cover to keep clean, but allow air circulation.

5. Doors should not be subjected to excessive water, abnormal heat, extreme dryness, humid conditions or sudden changes therein. They should be conditioned to average prevailing relative humidity of the locality before hanging.

6. The utility or structural strength of the door must not be impaired in the fitting of the door, the application of hardware, or cutting and altering the door for lights, louvers, panels, or any other special details.

7. Two hinges may be used for hollow core doors weighing less than 50 pounds or 6´8˝ in height. Solid core doors 6´8˝ in height and all 7´0˝ doorsrequire3hinges.Alldoorsgreaterthan7´0˝require4hinges.Field trimming of bifold and passage doors will void the warranty.

8. Beforefinishing,removehandlingmarksoreffectsofexposuretomoisture through a thorough, final sanding over all surfaces of the door using a fine grit sandpaper. Clean before applying sealer or finish.

5-Year Limited Warranty - Molded Interior Doors2-Year Limited Warranty - Flush and Stile & Rail Interior Doors

Page 21: Craftmaster Interior Doors

21

We’re door people.

MATERIALS NEEDED:•Oil-basedorwater-basedpaintorstain•3˝-4˝nylonbristlebrush•1˝nylonbristlebrush(forstainingonly)•100%cotton,lint-freewipingcloth•Denaturedalcoholormineralspirits

HOW TO PAINT TEXTURED CRAFTMASTER MOLDED INTERIOR DOORS1.Chooseahighqualityglossorsemi-glosspaint.Thiswillofferbetterperformanceandeasierapplication.It

will also best highlight the wood grain texture on the door.

2.Whenbuyingpaint,selectpainttofinishaninteriordoor.Also,notethepropertiesyoumostdesire:lowodor,excellentwashability,easyclean-upandsmoothness.

3. Lightly sand the entire surface with fine grit sandpaper to remove minor surface imperfections.

4.Makesurethedooriscleananddry.Moistenalint-freeclothwithdenaturedalcoholormineralspirits.Wipe the door thoroughly to remove all dust.

5.Paintthedooredgesandtouch-primeanyminorsurfacescratches.

6.Whenthedoorisfullydry,applytwocoatsofhigh-qualitypaint.Followthepaintmanufacturer’srecommendations for finishing.

7.Besuretofinishtopandbottomedges.

HOW TO PAINT SMOOTH CRAFTMASTER MOLDED INTERIOR DOORSUseapaintofdesiredglosslevel.Followsteps1,2,3and4notedabove.Insteadofstep5,applyatleastthree coats of topcoat with a sprayer, sanding between each coat.

Ofcourse,you’renotrestrictedtoonecolor.Considercontrastingthepanelswiththerestofthedoor,makingthemouldingsdarker,oraffixingdecalsonthepanelsforachild’sroom.Specialeffects,suchaslayering, translucence and texturing allow colors to become more complex as their effects interact with lighting. Your options are limited only by your imagination, so express yourself and turn your doors into décor.

HOW TO STAIN TEXTURED CRAFTMASTER MOLDED INTERIOR DOORSBecausestainingCraftMastermoldedinteriordoorsbyhandismorelike‘antiquing’thantypicalstaining,CMIrecommends that these doors be stained by a professional. This is not a project for beginners. Results are dependent on the type of stain used, application technique, individual preference, experience, and humidity conditions.

ForthosewhowishtostainCraftMasterdoors,thefollowinginstructionsmaybehelpful.Alwaystestyourstain on a small section of the door first, or call 800.405.2233 to request a hand sample for test purposes.

1. Prime the door with a tan primer. This will yield better results when trying to achieve a darker, more even wood-tonefinish.Purchaseawater-basedprimer.

2. Consult your local finishing supplier for the best stain to use, based on your experience and the desired look.Typically,opaque,solid-bodyorpigmentedsolidcolorstainsthatareoil-basedliquid,oil-basedgel,orwater-basedliquidworkbest.Transparentorsemi-transparentstainsdonotprovideadequatecolorcoverage and should not be used.

3. Lightly sand the entire surface with fine grit sandpaper to remove minor surface imperfections.

4.Makesurethedooriscleananddry.Moistenalint-freeclothwithdenaturedalcoholormineralspirits.Wipe the door thoroughly to remove all dust.

5.Followthestainmanufacturer’sapplicationinstructions.Startwiththedoorpanels,thencoverthehorizontalrails,thencovertheverticalstiles.Usethediagramsatleftasareference.Numbers1-4indicate the order to use when applying the stain.

6. Remove any excess stain from the corners of the panel areas by feathering with a 1˝ dry brush.

7. When wiping the stiles and rails, use long strokes to prevent the stain from pooling where the horizontal rails and vertical stiles meet.

8.Allowthedoortodrycompletelyfor24hours.Followthestainmanufacturer’srecommendationsforaclear, protective topcoat.

Note: Smooth CraftMaster molded interior doors cannot be stained.

Finishing Recommendations - Molded Interior Doors

Colonist®

Clermont®

Page 22: Craftmaster Interior Doors

22

CMI Manufacturing Network

Pioneers in Pennsylvania

Towanda, Pennsylvania is home to CMI and the technology that created CraftMaster molded door designs in 1968. TheTowandamillpioneeredthedevelopmentofPre-Stained molded door designs, and continues to be the only facility worldwide to manufacture this product with this proprietary technology.

Towanda,Pennsylvaniaplantdetails:

•17.5acresunderroof.

•273acresofland.

•Speciallyengineeredmanufacturinglineswhich allow for production flexibility.

•ManufacturesproductsforuseintheU.S.,SouthAmerica,Asia,Europeandthroughout the world.

•DevelopedthetechnologytomanufacturePre-Stainedmoldeddoordesigns.

•CreatedtheTEC™processusedtoproduce MiraTEC trim and Extira panels.

WiththeEarth’snaturalresourcesinlimitedsupply,choosing products that are manufactured responsibly is more important than ever. CMI uses sustainable products throughout its production processes, has initiated energy savingprogramsinitsfacilities,andhasearnedthird-partycertification for no added urea formaldehyde and the use of recycled content in its products. CMI products also contribute to industry green building programs.

CMI’sTowandafacilitysurpassed15millionmanhourswithout a lost time injury and was formally recognized forre-certifiedVoluntaryProtectionProgram(VPP)status.VPPisaprogramestablishedbyOSHAtorecognize superior performance in the field of health and safety.

Page 23: Craftmaster Interior Doors

To see a complete list of doors and sizes visit craftmasterdoors.com

23

Lean Manufacturing

CMI uses Lean Manufacturing to guide all processes and work flow to focus on the voice of customers. The focus is exclusively on value, as defined by customers, and the goal is to eliminate asmanynon-value-addedactivitiesaspossible.

Door-Manufacturing Facilities

CMI manufactures and markets a full line of CraftMaster molded, stile and rail, and flush doors.

•State-of-the-artmanufacturingfacilitiesarelocatedacrosstheU.S.

•Headquarters:

500 W. Monroe, Suite 2010Chicago, Illinois 60661

•Plantlocations:

Garland,Texas866.622.3667

Ozark,Alabama888.445.4201

Christiansburg,Virginia888.332.1976

Plainfield, Illinois 800.473.3103

•Distributioncapabilities.

•Manufactureover100doorproducts.

CMI Manufacturing Network

We’re door people.

™ and

® denotetradem

arksownedbyC

MIw

iththeexceptionofGreenLite,SustainableForestryInitiativeandU

.S.GreenBuildingC

ouncilwhicharethepropertyoftheirrespectiveow

ners..©2011C

MI4165/11

CraftMaster Door-Manufacturing Facility

Towanda Mill

CMI Headquarters

Page 24: Craftmaster Interior Doors

We’re door people.

craftmasterdoors.com

Caiman Cellini 8´0´́

CONTACT US 1.800.405.2233 craftmasterdoors.com


Recommended