CORNELL MX SERIES
Designed to handle high head applications while providing a long service life, the MX SERIES pumps have multi-vane, enclosed CA6NM impellers designed for INDUSTRY LEADING EFFICIENCY OF UP TO 78%!
• Heads to 800’
• Flows to 8,000 GPM
• Handles up to 2.38” solid
• Available in 2” to 8” models
CORNELL CYCLOSEAL® SEALING SYSTEM with tungsten carbide vs. silicon carbide seal and grit removal system.
17-4 PH STAINLESS STEEL SHAFT and double angular contact thrust bearings* extends the operating range and reduces shaft breakage.
HIGH-EFFICIENCY DESIGN pumps more liquid using less energy for substantial savings over the life of the pump.
3 OR 4 VANE ENCLOSED IMPELLERS are dynamically balanced and designed to handle solids up to 2.38”
DUCTILE IRON CONSTRUCTION for increased durability and resistance to wear.
300LB RATED DISCHARGE FLANGES and all iron frame construction for durability in harsh conditions.
CA6NM IMPELLER is standard on MX Series pumps.
WITHSTANDS HIGH OPERATING PRESSURES to achieve 600’ to 800’ TDH and flows up to 8,000 GPM.
OPTIONAL HARDENED WEAR RINGS on the impeller and volute provide added resistance to abrasive materials.
TWO-YEAR WARRANTY is standard on all MX Series pumps.
* The 80126MX includes triple angular contact bearings.
FEATURES AND BENEFITS
CORNELLMX SERIES
GPM
M3/HR
FEET
CAPACITY
200
300
400
500
600
800
2000
3000
4000
5000
6000
8000
100
1000
TOTA
L D
YNAM
IC H
EAD
0
100
200
300
400
500
600
700
800
900
30 40 50 60 80 200
300
400
500
600
800
2000
100
1000
0
25
50
75
100
125
150
175
200
225
250MET
ER
S
2415MX
3419MX
4622MX 6822MX
81024MX
81026MX
3617MX
MX SERIES FAMILY CURVE
CORNELL MX SERIES CURVES
0 25 50 75 100 125 150 175 200
0
50
100
150
200
250
300
350
TOTA
L D
YNA
MIC
HE
AD
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
CAPACITY0 100 200 300 400 500 600 700 800 900
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
19.59"VARIOUS ENCLOSED .75" 450 4" 3" 4
TYPE :MX SERIESCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal. Other mounting styles orS.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ER
S
Volute
SINGLE
0002 03/31/15
06/03/09CTG MODEL : 3419MX CURVE NO:
- - -
40%
3419MXVA
6 FT. (1.8 M)
DO NOT OPERATE IN WHITE AREA
250 HP
2400 RPM
2200 RPM
2000 RPM
1800 RPM
1600 RPM
1400 RPM
1200 RPM
50%
55%53%
52%45% 15 FT. (4.6 M) NPSHR
8 FT. (2.4 M)10 FT. (3.0 M)
200 HP
175 HP150 HP
125 HP100 HP
75 HP
50 HP
0 25 50 75 100 125 150 175 200
0
50
100
150
200
250
300
350
TOTA
L D
YNA
MIC
HE
AD
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
CAPACITY0 100 200 300 400 500 600 700 800 900
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
15.22"VARIOUS ENCLOSED .62" 530 4" 2" 3
TYPE :MX SERIESCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal. Other mounting styles orS.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ER
S
Volute
SINGLE
0001 03/31/15
06/08/11CTG MODEL : 2415MX CURVE NO:
- - -
45%
2415MXVA
18 FT. (5.5 M) NPSHR2950 RPM
150 HP
2700 RPM
2400 RPM
2100 RPM
1800 RPM
1500 RPM
1200 RPM
35% 40%
48%50%
125 HP
100 HP
75 HP
60 HP50 HP
40 HP30 HP
20 HP15 HP
10 FT. (3.0 M)5 FT. (1.5 M)
0 50 100 150 200 250 300 350 400
40
60
80
100
120
140
160
180
200
TOTA
L D
YNA
MIC
HE
AD
100
150
200
250
300
350
400
450
500
550
600
650
700
CAPACITY0 200 400 600 800 1000 1200 1400 1600 1800
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
21.95"VARIOUS ENCLOSED .98" 552 6" 4" 4
TYPE :MX SERIESCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal. Other mounting styles orS.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ERS
Volute
SINGLE
0002 04/02/15
3/11/09CTG MODEL : 4622MX CURVE NO:
CTG
50%
4622MXVA
10 FT. (3.0 M) NPSHR
1900 RPM
350 HP
1800 RPM
1600 RPM
1400 RPM
1200 RPM
55%
55%
60%
60%
62%
62%
65%65%
8 FT. (2.4 M)
6 FT. (1.8 M)
5 FT. (1.5 M)
300 HP
250 HP
200 HP
150 HP
100 HP
75 HP
0 50 100 150 200 250 300 350 400
40
60
80
100
120
140
160
180
200
TOTA
L D
YNA
MIC
HE
AD
100
150
200
250
300
350
400
450
500
550
600
650
700
CAPACITY0 200 400 600 800 1000 1200 1400 1600 1800
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
17.50"VARIOUS ENCLOSED .75" 700 6" 3" 4
TYPE : MX SERIESCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mount configuration.Other mounting styles or S.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ERS
Volute
SINGLE
0001 05/04/15
09/02/15AE MODEL : 3617MX CURVE NO:
AE
50%
3617MXVA
2200 RPM
200 HP
1800 RPM
2000 RPM
55%60%
65%
65%
67%
67%
45%
175 HP
150 HP
125 HP
100 HP
75 HP
4 FT. (1.2 M)10 FT. (3.0 M)
16 FT. (4.9 M)13 FT. (4.0 M)
7 FT. (2.1 M)
1400 RPM
1600 RPM
60 HP
2415MX• Flow rates from 115 to 480 GPM (25 to 110 m3/h)• Pressure to 350 PSI (2415 kPa)• 50% efficient at Best Efficiency Point
3419MX• Flow rates from 170 to 800 GPM (40 to 180 m3/h)• Pressure to 350 PSI (2415 kPa)• 55% efficient at Best Efficiency Point
3617MX• Flow rates from 230 to 1220 GPM (50 to 275 m3/h)• Pressure to 250 PSI (1725 kPa)• 67% efficient at Best Efficiency Point
4622MX• Flow rates from 390 to 1680 GPM (90 to 380 m3/h)• Pressure to 440 PSI (3035 kPa)• 65% efficient at Best Efficiency Point
CORNELLMX SERIES CURVES
0 250 500 750 1000 1250 1500 1750 2000
80
100
120
140
160
180
200
220
240
TOTA
L D
YNA
MIC
HE
AD
200
250
300
350
400
450
500
550
600
650
700
750
800
CAPACITY0 1000 2000 3000 4000 5000 6000 7000 8000 9000
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
24.25"VARIOUS ENCLOSED 2.38" 1080 10" 8" 3
TYPE : MX SERIESCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mount configurationwith Cycloseal®.Other mounting stylesor S.G. may require curve adjustments.
GPM
M3/HR
FEE
T
Volute
DOUBLE
02
00 03/20/15
04/11/16JG
MODEL : 81024MX CURVE NO:CTG
55%
81024MXVA
1800 RPM
900 HP
1400 RPM
1200 RPM
60% 65%70%
74%
77%
74%
14 FT. (4.3 M)
22 FT. (6.7 M)
30 FT. (9.1 M) NPSHR
800 HP700 HP
600 HP
500 HP400 HP300 HP
1000 HP
1600 RPM
MET
ERS
70%
76%
76%
1250 HP
11 FT. (3.4 M) 26 FT. (7.9 M)1900 RPM
0 100 200 300 400 500 600 700 800 900 1000
40
60
80
100
120
140
160
180
200
TOTA
L D
YNA
MIC
HE
AD
100
150
200
250
300
350
400
450
500
550
600
650
700
CAPACITY0 500 1000 1500 2000 2500 3000 3500 4000 4500
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
21.95"VARIOUS ENCLOSED 2.00" 709 8" 6" 4
TYPE :MX SERIESCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal. Other mounting stylesor S.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ER
S
Volute
DOUBLE
0001 04/06/15
07/22/09CTG MODEL : 6822MX CURVE NO:
- - -
40%
6822MXVA
30FT. (9.1 M)NPSHR
1900 RPM
700 HP
1800 RPM
1500 RPM
1200 RPM
60%50%70%
74% 75%
75%
74%
600 HP
500 HP
400 HP
300 HP
200 HP150 HP
20FT. (6.1 M)
10FT. (3.0 M)15FT. (4.6 M)
7FT. (2.1 M)
0 250 500 750 1000 1250 1500 1750 2000
0
50
100
150
200
250
300
350
TOTA
L D
YNA
MIC
HE
AD
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
CAPACITY0 1000 2000 3000 4000 5000 6000 7000 8000 9000
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
26.5"VARIOUS ENCLOSED 2.38" 1080 10" 8" 3
TYPE :MX SERIESCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal. Other mounting stylesor S.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ERS
Volute
DOUBLE
0001 04/06/15
09/05/12CTG MODEL : 81026MX CURVE NO:
- - -
55%
81026MXVA
30 FT. (9.1 M) NPSHR
1800 RPM
1500 HP
65%
75%
60%70%
73%
73%70%
75%
22 FT. (6.7 M)18 FT. (5.5 M)
15 FT. (4.6 M)12 FT. (3.7 M)
1600 RPM
1400 RPM
1200 RPM 1250 HP
1000 HP900 HP
800 HP700 HP
600 HP500 HP
6822MX• Flow rates from 575 to 4150 GPM (130 to 945 m3/h)• Pressure to 350 PSI (2415 kPa)• 75% efficient at Best Efficiency Point
81024MX• Flow rates from 1200 to 7150 GPM (275 to 1625 m3/h)• Pressure to 340 PSI (2344 kPa)• 73% efficient at Best Efficiency Point
81026MX• Flow rates from 1800 to 8000 GPM (410 to 8000 m3/h)• Pressure to 475 PSI (3275 kPa)• 78% efficient at Best Efficiency Point
WE PUT OUR BEST IDEAS TO THE TESTOur modern hydraulics lab is the proving ground for all Cornell pumps. Our goal is to deliver the most efficient pumps at a time when energy costs are escalating. Technicians, under the direction of registered Professional Engineers, conduct certified performance tests that precisely determine the performance and NPSH required for particular design conditions.
The focal point of the research facility is a 80,000 gallon closed loop system for running accurate low pressure tests. It can circulate up to 60,000 gallons of water per minute. All test motors are calibrated, and adhere to the Hydraulic Institute Standards in testing. A variable frequency drive will allow us to test pumps up to 4,000 horsepower at various speeds. Additional tests can be conducted upon customer request.
CORNELL MX FEATURES & OPTIONSREDI-PRIME® DRY-PRIMING OPTIONCornell Redi-Prime® pumps are designed with oversized suctions to provide more flow, reduced friction losses, and higher suction lift. The priming system was designed with the environment in mind. By using a positive sealing float box and a diaphragm vacuum pump, there is no water carry-over to contaminate the environment. Redi-Prime is offered on all Cornell industrial pumps, and is available in virtually every other pump we manufacture as well.
� Fully automatic priming and repriming
� Handles air/liquid mixtures with ease
� Rapidly primes and re-primes completely unattended
� Environmentally safe priming system designed to prevent product leakage
� Premium hydraulic efficiency for reduced energy consumption
CYCLOSEAL® SYSTEM FOR GRIT REMOVALCycloseal® is patented system with a self-contained single mechanical seal with a dished line. The Cycloseal pattern cast into the pump backplate in conjunction with contoured impeller back vanes and a dished backplate creates pressure gradients that move solids and entrained vapor away from the seal faces. The Cycloseal system is only available on Cornell pump series.
� Removes grit from pump seal compartment � Extends pump seal life three times standard mechanical � No drips/mess at application site � Reduced maintenance costs � Increased uptime and reliability
Impeller Back Vanes
Specifically-Calibrated Impeller
Quality Mechanical Seal
Backplate Deflector Vanes
Dished Backplate
Voluminous SpaceBehind Impeller
SINGLE VOLUTE DOUBLE VOLUTE
DOUBLE VOLUTE DESIGNCornell’s double volute system minimizes radial thrust loads common with high capacity, high-head centrifugal pumps, by balancing the radial forces around the impeller.
� Minimizes radial thrust load
� Eliminates shaft flexing and fatigue
� Greatly extends life of packing/seal, wear rings and bearings
� Effectively meets high pressure and high volume requirements
� Increases bearing life
CORNELLMX FEATURES & OPTIONS
CD4MCU STAINLESS STEEL OPTIONSCD4MCu is a duplex stainless steel, with greater corrosive resistance than 304 stainless steel. CD4MCu allows the pumps to be used in more abrasive applications, and it won’t pit like 304 stainless steel, has a better stress/corrosive cracking resistance than 304 stainless, and higher strength than 304 stainless steel. And, compared with cast iron material, it is much more resistant to corrosion and much stronger.
Cornell distributors have access to 13 of Cornell’s most popular models in CD4MCu, allowing us to slash production time and price. Cornell can supply a CD4MCu pump in as little as one to two weeks.
� Clean Steel � Usable in pH levels of 2 to 13.5 � Brinell hardness up to 275 � Corrosion and pitting resistance
� Higher strength than 304 stainless steel
� Improved ductility and weldability � Better resistance to embrittlement
MOUNTING CONFIGURATIONS Cornell’s modular frame design allows for easy adaptability. Choose a pump and then pick the mounting configuration best suited to your application. Right-hand and left-hand rotation, along with tangential or centerline discharges, are available for most pumps.
EMENGINE MOUNTED
FHORIZONTAL FRAME MOUNTED
QUALITY ASSURANCE Cornell Pump proudly maintains its ISO 9001:2008 certification that validates Cornell is in compliance with all necessary processes to meet customer requirements.
The elements associated with ISO 9001:2008 certification include such areas as contract review, design and development, production, purchasing, quality control and service.
RUN-DRY™ SEAL PROTECTION Cornell’s Run-Dry system consists of an auxiliary gland and oil reservoir that keeps the seal faces lubricated and prevents dry running of the seal faces during priming, re-priming, or standby operation.
� Run dry for hours without damaging the seal
� Cools and lubricates seal faces � Ideal for applications that could
experience dry operation � Useable in conjunction with
Cycloseal® and Redi-Prime®
Cycloseal® and Redi-Prime® are Registered Trademarks of Cornell Pump Company.
Cornell pumps and products are the subject of one or more of the following U.S. and foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001;
6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and foreign patent applications.
EFFICIENT BY DESIGN
SELF-PRIMING PUMPSCORNELL PUMP COMPANY
STX & STL SERIES
INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL® SYSTEM
FIVE-YEARWARRANTY
CORNELL SUBMERSIBLESCORNELL PUMP COMPANY
EFFICIENT BY DESIGNEFFICIENT BY DESIGN
EFFICIENT, RELIABLE, TROUBLE-FREE
EFFICIENT BY DESIGN
HYDRO TURBINECORNELL PUMP COMPANY
AGRICULTURECORNELL PUMP COMPANY
EFFICIENT BY DESIGN
INDUSTRIALCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
Immersible motors are designed to be used in dry-pit applications where there is a possibility of flooding. Why take a submersible motor that was designed to run submerged 100% of the time and modify it to run in air 99% (or most of the time) and submerged 1% of the time (in case of a flood)? This seems backwards. The correct approach is to take a TEFC motor that is designed to run in air 100% of the time and adapt it to run submerged 1% of the time (in case of a flood).
IMMERSIBLE MOTOR BASIC DESIGN:The basic design of the immersible pump/motor incorporates a premium efficient, inverter duty, P-Base or C-Face TEBC motor (totally enclosed, blower cooled). The motor, as the name implies, is totally enclosed and cooled by a blower on top of the motor. If the motor becomes submerged, the blower motor fan shuts down without affecting the main motor. While the motor is temporarily submerged, the media cools the motor just like a true submersible. A special conduit box is used to prevent water leakage into the motor. The motor is designed to prevent infiltration of water along the shaft and into the motor by utilizing a triple redundant sealing system, including a patented hydroseal design. The motor-end bell housing incorporates the ‘inverted cup’ principle, which traps an air bubble under the motor as water rises, thus keeping water away from the shaft seal. The shaft is fitted with a hydroseal, which expells water and further reduces the chance of water reaching the shaft seals.
The Immersible motor can withstand up to 30 feet of submergence depth for a two-week period. This exceeds the requirements of Immersible motors that is described in the industry standard “Index of
Protection” IP67. Competitive designs only allow immersion of the motor for a period of time not exceeding 30 minutes at a submergence level of 3 ‘. Hardly enough time to deal with any kind of flooding emergency!
THE IMMERSIBLE MOTOR CONCEPT:
CORNELL PUMP COMPANY // 16261 SE 130th AVE CLACKAMAS, OR2013 © ALL RIGHTS RESERVED
IMMERSIBLECORNELL PUMP COMPANY
FOOD PROCESSCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
WATER TRANSFERCORNELL PUMP COMPANY
HYDRAULIC FRACTURING
EFFICIENT BY DESIGN
REDI-PRIME PUMPSBOMBAS DE CEBADO ASISTIDO REDI-PRIME®
CORNELL PUMP COMPANY
Cornell Pump Company16261 SE 130th AveClackamas, OR 97015P: (503) 653-0330F: (503) 653-0338
Efficient by Design
CORNELLPUMP.COM©2011 CORNELL PUMP COMPANY
LÍNEA DE PRODUCTOS DE CORNELL
Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.
Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001;
6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.
*To visit our REDI_PRIME webpage on your smartphone, scan the QR code below:
Cycloseal®, Hot Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.
Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001; 6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.
self-priming
refrigeration municipal food process industrial
submersible hydro-turbine agricultureTHE CORNELL PRODUCT LINE
MINE DEWATERINGCORNELL PUMP COMPANY
WHEN RELIABILITY MATTERS
BOMBAS AUTOCEBANTES BOMBAS SUMERGIBLES TURBINAS BOMBAS PARA AGRICULTURA Y RIEGO
BOMBAS PARA REFRIGERACIÓN
BOMBAS DE CEBADO ASISTIDO
BOMBAS PARA ELSECTOR PÚBLICO
DESAGÜES EN MINERÍA
TRANSPORTE HIDRÁULICODE ALIMENTOS
CORPORATIVO
BOMBAS PARA EL SECTOR INDUSTRIAL
MOTORES INMERSIBLES
CUANDO LA FIABILIDAD ES LO QUE IMPORTA
MUNICIPALITIESCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
MINING
EFFICIENT BY DESIGN
CORNELL PUMP COMPANY
EFFICIENT BY DESIGN
CUTTER PUMPS
EFFICIENT BY DESIGN
CORNELL PUMP COMPANY
CHOPPERCORNELL PUMP COMPANY
EFFICIENT BY DESIGNEFFICIENT BY DESIGNEFFICIENT BY DESIGN
END GUNBOOSTER PUMP
CORNELL PUMP COMPANY
EFFICIENT BY DESIGN
FOR CENTER PIVOT IRRIGATION
HYDRAULIC SUBSCORNELL PUMP COMPANY
• Models Available - 4NNT, 6NNT, 8NNT, etc.• Discharge Sizes Available - 4 to 8 inch• Standard Construction - Cast Iron, Class 30• Optional Construction - 316SS, CD4MCU, Ductile Iron• Permco hydraulic drive
• Various adaptor plates available for hydraulic motor fit• Heavy duty shaft / bearing frame assembly• Heavy duty “wet end” construction• Manufactured in the United States
• Premium Hydraulic Efficiencies, 76 to 80% BEP• 3 inch or larger solid handling capability• Total Dynamic Head: 50 to 360 feet• Capacity: 200 to 7000 GPM
• General Agriculture, Industrial and Municipal Applications• Rental Applications• Mining Applications• Flood Control Applications• Construction / Dewatering Applications
STANDARD SPECIFICATIONS
FEATURES AND BENEFITS
PERFORMANCE CHARACTERISTICS
TYPICAL MARKETS
EFFICIENT BY DESIGN
MANURE PUMPSCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
MP SERIESCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
MINING PUMPS DESIGNED FOR COARSE ABRASIVES
MX SERIESCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
MX SERIESCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
HIGH HEAD MINING PUMPS
SLURRY PUMPS
SLURRY PUMPSCORNELL PUMP COMPANY
CURVES
EFFICIENT BY DESIGN
SELF PRIMING SUBMERSIBLE
HYDRO TURBINE
AGRICULTURAL REFRIGERATIONMUNICIPALMINE DEWATERINGFOOD PROCESS
CUTTERCHOPPER EDGE™ HYDRAULIC SUBS MANURE MP SERIES
MX SERIES MX MINING REDI-PRIME® SLURRY
INDUSTRIAL
IMMERSIBLE
REFRIGERATIONCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
WATER TRANSFER
CORNELLPUMP.COM©2015 CORNELL PUMP COMPANY
MARKET AND PRODUCT LINEOIL & GAS
CORNELL PUMP COMPANY
EFFICIENT BY DESIGN
OIL & GAS
AUTHORIZED CORNELL PUMP DISTRIBUTOR
Cornell Pump CompanyClackamas, Oregon, USA
P: +1 (503) 653-0330F: +1 (503) 653-0338
EFFICIENT BY DESIGN
V-SERIES PUMPSCORNELL PUMP COMPANY
FOR MEDIUM DUTY APPLICATIONS
V SERIES
CYCLOSEAL®CORNELL PUMP COMPANY
PATENTED LONG LASTING, LEAK-FREE FLUSHLESS SEALING SYSTEM
EFFICIENT BY DESIGN
Celebrating
20YEARS
1994-2014SYSTEMSYSTEM
CYCLOSEALCYCLOSEAL
CYCLOSEAL®