CONTENTS
Street Lights p. 8-39
Solar Street Lights p.40-53
Park Lights p. 54-83
Hanging Street Lights p. 84-87
Planet System: Intelligent Lighting for Smart Cities p. 88-93
IINNO Intelligent Innovations, Ltd.“Street Lights Catalogue”March 2020
Orion Park Light Ip. 56
Saturn Park Lightp. 66
Venus Park Lightp. 78
Orion Park Light IIp. 58
Pegasus Park Lightp. 70
Pegasus Park Lightp. 82
Mira Park Lightp. 62
Aurora Park Lightp. 74
Orion Hanging Street Lightp. 86
Atlas Street Lightp. 18
Mira Street Lightp. 30
Mira Solar Street Lightp. 42
Aquila Street Lightp. 12
Gemma Street Lightp. 34
Atria Solar Street Lightp. 46
Gemma Solar Street Lightp. 52
Orion 7 Street Lightp. 24
Sarin Street Lightp. 38
Street Lights
Solar Street Lights
Park Lights
Hanging Street Lights
INGRESS PROTECTION RATING
Rating Example
IP 6 5
Ingress protection Against Solids Against Liquids
The first number identifies the ingress protection rating against solids
1. for solid bodies with dimensions > 50mm
2. for solid bodies with dimensions > 12.5mm
3. for solid bodies with dimensions > 2.5mm
4. for solid bodies with dimensions > 1mm
5. Dust protected
6. Dust tight
The second number identifies the ingress protection rating against liquids
1. for vertically falling drops
2. for vertically falling drops when enclosure is tilted up to 15˚ vertically
3. for water sprayed at an angle up to 60˚ vertically
4. for water splashed in any direction
5. for water projected in jets against the enclosure from any direction
6. for water projected in powerful jets against the enclosure from any direction
7. for enclosure’s temporary immersion at 1 meter in the water, under defined conditions
8. for enclosure’s continuous immersion in the water, under more severe conditions to those of number 7.
IMPACT PROTECTION RATING
Rating Example
IK 05
Impact protection Mechanical Impact level
The number identifies the impact protection rating
00. No protection
01-05. for tiny impact of < 1 Joule
06. for impact of 1 Joule
07. for impact of 2 Joule
08. for impact of 5 Joule
09. for impact of 10 Joule
10. for impact of 20 Joule
SYMBOLS KEY
Certification mark that indicates conformity with health, safety, and environmental protection standards
for products sold within the European Economic Area (EEA)
The UL Mark is the single most accepted Certification Mark in the United States. If a product carries one
of these marks, it means UL found that representative product samples met UL’s requirements
ENEC (European Norms Electrical Certification) is a certification scheme under CENELEC, accepted
throughout Europe. The ENEC Mark for electrical products demonstrates compliance with European
safety standards.
CB Scheme is an international system for mutual acceptance of test reports and certificates dealing with
the safety of electrical and electronic components, equipment and products.
TÜV certification marks show that manufacturer’s products have met applicable safety requirements
and quality standards.
The UL Mark is the single most accepted Certification Mark in the United States. If a product carries one
of these marks, it means UL found that representative product samples met UL’s requirements.
The cULus is a combination mark that indicates compliance with both the U.S. requirements and those of
CAN/CSA 22.1-12, which is the Canadian Electrical Code issued by the Canadian Standards Association.
INMETRO, the Brazilian accreditation body, is responsible for the accreditation of each product Certifi-
cation Body (CB). In addition, INMETRO defines the products and the respective requirements within this
certification scheme. Products manufactured in or exported to Brazil need a CB-issued certificate, stating
that the product or family meets the Brazilian requirements.
The DesignLights Consortium® is a collaboration of utility companies and regional energy efficiency
organizations. The certification is issued for commercial LED lights based on their color rendering capabil-
ities, light distribution and output, lumen maintenance, longevity or the ability to withstand stress, and the
duration of the warranty period.
The FCC Declaration of Conformity or the FCC mark is a certification mark employed on electronic
products manufactured or sold in the United States which certifies that the electromagnetic interference
from the device is under limits approved by the Federal Communications Commission.
The C-Tick mark is intended for use on products that comply with EMC standards. The label indicates that
the product complies with the applicable EMC standard and establishes a traceable link between a
product and the supplier responsible for placing it on the Australian or New Zealand market.
0-10V 1-10V DALI Triac
Non-Dimmable Product
0-10V Dimmable Product
1-10V Dimmable Product
DALI Dimmable Product
TRIAC Dimmable Product
To establish smart city operation, energy conservation and environmental protection.
Optional light distribution curve available with optics Type I (S/M/L), Type II (S/M/L), Type III (S/M/L).
Lamp breather ensures air balance inside and outside of the luminaire which improves the street lights’ service life.
Lamp will automatically turn on and off according tolux difference.
Adjustable bracket for horizontal or vertical installation
B. Wireless control system available
D. Modular LED lens design
E. Imported Breather available
C. Photocell available
Easy disassembly for reduced maintenance costs.
F. Detachable connect base available
Extends the lifetime of the productwhile also protecting the driver and the luminaire from lightnings.
G. Surge Protection Device available
When the luminaire is opened for maintance, the power will be cut off automatically to ensure the safety of the maintenance personnel.
H. Power Turn Off Protector available
I. Adjustable bracket available
A variety of drivers are available.
A. LED Power Supply
A q u i l a S t r e e t L i g h t
Tempered glass with 94% lighttransmittance
High product reliability by applying 13 steps painting proccess
High intensity die-cast aluminumbody with an IK08 impact grade and tempered glass cover rated IK08.
High efficiency coating. Paint and metal parts succefully passed the 500 hours salt spray test.
Modular optical lens design, easy to upgrade in the future.
Advantages
Detachable design and use of fast turn off power protector render this luminaireconvenient and safe for maintenance.
Metal Grey
Color Options
Black
10kV Surge Protection Device included.
Available with Electrical ProtectionClass I or Class II.
Features
Al-Si-Cu Alloy Die Casting Housing
● Impact level up to IK08
● Tensile strength reaches 288.3N/mm2
● IEC 62262;2002
● Protection level of outer shell for external mechanical collision● Stainless steel screws● Structure allows air flow through heat sink for optimum heat management
Double lamp body protection
- Super Toughened glass● Toughened 3N/cm
● Internal parts ● Surface stress resistance α≥87Mpa
● Anti-aging ability
● Anti-aging
● Special optic lenses provide light uniformity and optimizes the lamp’s light distribution and efficiency
● Anti-ultraviolet radiation142º C High temperature resistance-110º C Low temperature resistance
Professional PC optical lens module
Clip-on design, makes lamp easy to install, maintain and replace.
The adjustable bracket allows horizontal or vertical installation.
Bracket bent angle range: -15° to +15° Bracket bent angle range: -15° to +15°
Vertical installationHorizontal installation
15°
15°
15° 15°
Aquila Series - Models
Pole Selections
Installation
S Model 26W/40W/45W/50W Top view Side view
M Model 60W/80W/100W/110W Top view Side view
L Model 120W/150W Top view Side view
G Model 160W/200W/240W Top view Side view
40W/45W/50W/60W
26W/40W/45W26W/40W/45W/50W
100W/110W/120W/150W/160W12m
10m
8m
6m
4m
150W/160W/200W/240W
40W/45W/50W/60W
60W/80W/100W/110W
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Str
ee
t Li
gh
ts
437.7mm 639.88mm
356.9mm 706.9mm
87.4
mm
93.1
3mm
154.
6mm
492.9mm
392.1mm
91.2
mm
204.
8mm
514.48mm
407.85mm
96.8
9mm
Inst. pipe diameter: Ø42-50mm Inst. pipe diameter: Ø42-60mm Inst. pipe diameter: Ø42-60mm Inst. pipe diameter: Ø42-60mm
Bridgelux 5050 / 3030
Die cast aluminum &Tempered glass
155Lm/W
IP66
10yrs Warranty
7yrsWarranty
5yrsWarranty
LM80 18000hrs
IK08 500hrs Salt Spray
Test
Moso/Philips
Available
Grey/Black
Vertical Pole/Horizontal Pole
-40°C ~ +50°C
Wireless Control System/ Photocell/Dimming
A q u i l a S e r i e s
adjustable bracket
Available Accessories
- 90° Adjustable bracket- Photocell- 5-pin and 7-pin NEMA receptacle- Breaker- Vent
PWM
- 10KV Surge protection device included- Non-flickering driver
Extra Features
1-10V
845837
845306
845843
845308
845310
845312
845314
846538
845318
845320
845322
845324
845326
26W
40W
80W
160W
60W
150W
240W
45W
50W
100W
110W
200W
AC100-277V 3000K/4000K/5000Κ/6500K
>70>0.92
120W
Type I S/M/LType II S/M/LType III S/M/L
155Lm/W
26W/40W/45W/50W 60W/80W/100W/110W 120W/150W 160W/200W/240W
250m
m
274.
83m
m
1 2
To establish smart city operation, energy conservation and environmental protection.
Optional light distribution curve available with optics Type I (S/M/L), Type II (S/M/L), Type III (S/M/L).
Lamp breather ensures air balance inside and outside of the luminaire, thus improving the street lights’ lifetime.
Lamp will automatically turn on and off according tolux difference.
Easy disassembly for reduced maintenance cost.
Extends the lifetime of the productwhile also protecting the driver and the luminaire from lightnings.
When the luminaire is opened for maintance, the power will be cut off automatically to ensure the safety of the maintenance personnel.
B. Wireless control system available
D. Modular LED lens design
E. Imported Breather available
C. Photocell available
F. Detachable connect base available
G. Surge Protection Device
H. Power Turn Off Protector available
A variety of drivers are available.
A. LED Power Supply
A t l a s S t r e e t L i g h t
Tempered glass with 94% lighttransmittance
High product reliability by applying 13 steps painting proccess
High intensity die-cast aluminumbody with an IK08 impact grade and tempered glass cover rated IK08.
High efficiency coatings. Paint and metal parts succefully passed the 500 hours salt spray test.
Modular optical lens design, easy to upgrade in the future.
10kV Surge Protection Device included.
Advantages
Detachable design and use of fast turn off power protector render this luminaireconvenient and safe for maintenance.
Metal Grey
Color Options
Black
Available with Electrical ProtectionClass I or Class II.
Features
Al-Si-Cu Alloy Die Casting Housing
● Impact level up to IK08● Tensile strength reaches 288.3N/mm2
● GB/T 20138-2006/IEC 62262;2002 Protection level of outer shell for external mechanical collision
Double lamp body protection
-Super Toughened glass
● Toughened 3N/cm
● Internal parts ● Surface stress resistance α≥87Mpa
● Anti-aging ability
● Anti-aging● Anti-ultraviolet radiation
142º C High temperature resistance-110º C Low temperature resistance
Professional PC optical lens module
Clip-on design, makes luminaire easy to install, maintain and replace.
The adjustable bracket allows horizontal or vertical installation.
Horizontal installation Vertical installation Bracket Tilt Angle range: -15° to +15°
15°
15°
Atlas Series - Models
Installation
S Model 40W/50W Top view Side view
Mn Model 26W Top view Side view
M Model 60W/80W Top view Side view
L Model 100W/120W Top view Side view
G Model 160W/200W/240W Top view Side view
120W/150W/160W/200W
150W/160W/200W/240W
50W/60W/80W/100W
80W/100W/120W/150W
26W/40W/50W
40W/50W/60W
40W/50W
12m
10m
8m
6m
4m
Pole Selections
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Str
ee
t Li
gh
ts
Bridgelux 5050 / 3030
Die cast aluminum &Tempered glass
IP66
10yrs Warranty
7yrsWarranty
5yrsWarranty
500hrs Salt Spray
Test
LM80 18000hrs
IK08
Moso/Philips
Available
Grey/Black
Vertical Pole/Horizontal Pole
-40°C ~ +50°C
Wireless Control System/ Photocell/Dimming
A t l a s S e r i e s
Available Accessories
- Photocell- 5-pin and 7-pin NEMA receptacle- Breaker- Vent
- 10KV Surge protection device included- Non-flickering driver
Extra Features
PWM1-10V
155Lm/W 160Lm/W
845334
846543
845336
845338
845340
845342
845344
845346
845350
845348
40W
26W
80W
240W
60W
200W
120W
50W
100WAC100-277V 3000K/4000K/
5000Κ/6500K >70>0.92
160W
Type I S/M/LType II S/M/LType III S/M/L
155Lm/W
160Lm/W
A
C
B
Installation pipe diameter: Ø42-60mm
mm
477 218 118477 279 118538 279 118630 279 118798 402 130
mm mm
A B CWattage
26W40W/50W60W/80W100W/120W160W/200W/240W
1 8
To establish smart city operation, energy conservation and environmental protection.
Optional light distribution curve available with T2-1, T3-1, TS-1 easy to replace in the future.
A variety of drivers are available.
Lamp breather ensures air balance inside and outside of the luminaire which improves the street lights’ service life.
Lamp will automatically turn on and off according tolux difference.
Easy disassembly for reduced maintenance costs.
To provide a reliable guarantee for LED drive power, extend the life of theproduct and protect from lightnings.
When luminaire is opened for maintance, the power will be cut off automatically to protect the safety of maintenance personnel.
A
A. Wireless control system available
D. Modular LED lens design
B. LED Power Supply
E. Imported Breather
C. Photocell Available
F. Detachable connect base
G. Surge Protection Device
H. Power Turn Off Protector
F
B G
C
H
D
E
Metal Grey
Color Options
White BlackPearl Powder
Tempered glass with 94% lighttransmittance
High product reliability by applying 13 steps painting proccess
High intensity die-cast aluminumbody with an IK09 impact grade and tempered glass cover rated IK07.
High efficiency coatings. Paint and metal parts succefully passed the 600 hours salt spray test.
Modular optical lens design, easy to upgrade in the future.
Clip-on design, makes lamp easy to install, maintain and replace.
Detachable design and use of fast turn off power protector render this luminaireconvenient and safe for maintenance.
With surge protector device, the luminaire can reach Class I (10KV) or Class II (5-9KV).
O r i o n 7 S e r i e s
Advantages
Back Angle: 0º, +5º, +10º, +15ºBent Angle: 0º, -5º, -10º, -15º
Back Angle: 0º, +5º, +10º, +15º
Horizontal installation
Vertical installation
12m
10m
8m
6m
4m
53W/88W/117W/155W
117W/155W/210W
32W/42W
32W/42W/53W/88W
15º
15º
15º
● Anti-aging● Anti-ultraviolet radiation
142º C High temperature resistance-110º C Low temperature resistance
Al-Si-Cu Alloy Die Casting Housing
● Impact level up to IK09
● Tensile strength reaches 288.3N/mm2
● GB/T 20138-2006/IEC 62262;2002 Protection level of outer shell for external mechanical collision
Double lamp body protection
● Smooth surface for effective snow drainage● Seamless surface to ensure rainwater scouring
Professional PC optical lens module
Double lamp protection
-Super Toughened glass -Super-tempered glass
● Toughened 3N/cm ● Internal parts ● Surface stress resistance α≥87Mpa
● Anti-aging ability
Installation
Pole Selections
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Str
ee
t Li
gh
ts
25163
25178
25169
25184
28865
25181
25187
32W
88W
53W
155W
42W
117W
AC100-277V 3000K/4000K/6500K >70>0.90
130-135Lm/W
210W
50°x155°75°x155°68°x150°
A
mm
630
758878
266
332402
160
167182
mm
C
mm
B
A B C
Installation pipe diameter: Ø60mm for 32W-88W,Ø76mm for 117W-210W
120-125Lm/W
Osram/Seoul
Die cast aluminum &Tempered glass
120Lm/W
O r i o n 7 S e r i e s
IP665yrs Warranty
IK09
Meanwell/Inventronics
Available
Grey/White/Black/Pearl
Vertical Pole/Horizontal Pole
-30°C ~ +50°C
Wireless Control System/ Photocell/Dimming
Available Accessories
- 7-pin NEMA receptacle- Philips external Surge Protection Device
- Non-flickering driver
Extra Features
130Lm/W
Wattage
32W/42W/53W
88W117W/155W/210W
1-10V
2 4
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Str
ee
t Li
gh
ts
842490
842505
842499
842511
842493
842508
842514
32W
88W
53W
155W
42W
117W
AC100-277V 3000K/4000K/6500K >70>0.90 135Lm/W
210W
50°x155°75°x155°68°x150°
A
A
mm
630
758878
266
332402
160
167182
B
mm
CC
mmWattage
32W/42W/53W
88W117W/155W/210W
Installation pipe diameter: Ø60mm for 32W-88W,Ø76mm for 117W-210W
B
Inventronics
Philips
-30°C ~ +50°C
Available
135Lm/W
O r i o n 7 S e r i e s
IP665yrs Warranty
IK09
Grey/White/Black/Pearl
Vertical Pole/Horizontal Pole
Die cast aluminum &Tempered glass
Wireless Control System/ Photocell/Dimming
Available Accessories
- 7-pin NEMA receptacle- Philips external Surge Protection Device
- Non-flickering driver
Extra Features
1-10V
2 6
Intelligent Control
Optic Lens
● Buckle for fixing heat sink could be opened without tools. ● There is a supporting bracket to hold upper and lower parts of fixture body, when electricians open for maintaining.
Avoids accumulation of dust, sand or other solid materials, minimizes environment impact on luminare performance.
Tool-free Open and Maintenance
Hinged cover can be opened without the use of tools.
Surge ProtectionEasy Replacement for LED Driver
Super Smooth Surface
Auto electrical disconection
Built-in circuit breaker, tool free electrical gear tray.
6kV line-to-line protection and 10kV line-to-earth protection
● Occupancy Sensor● Photocell● NEMA compatible
Optional light distribution curve available with Type II, Type III, Type IV, Type V. High permeability tempered glass is used to provide the best lumen output for the luminaire.
Black Silver
Advantages
Heavy duty die-cast aluminumhousing with IK10 and 3G vibration rating
Suitable for horizontal or vertical installation
Tempered glass cover
Level adjustable housing from -15° to +15°
Color Options
M i r a S e r i e s
UV stabilized polyester powder paint finish for durability and corrosion resistance.Additional color options available under special terms.
Hinged cover for tool-less and easy maintenance
Expertly engineered individual lenses made of ptical grade polycarbonate for maximum light intensity
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Str
ee
t Li
gh
ts
AC100-277V 3000K/4000K/5000K/6500K >80>0.92
145Lm/W
130Lm/W
125Lm/W
155Lm/W
100°x145°/75°x150°/85°x150°
843636
843642
843648
843640
843646
843652
843638
843644
843650
20W
50W
90W
40W
75W
150W
30W
60W
120W
591mm 610mm
149mm 215mm
230mm 288mm
Installation pipe diameter:Ø55-60mm20W/30W/40W/50W/60W/75W 90W/120W/150W
M i r a S e r i e s
Meanwell/Philips
Philips Lumileds
-40°C ~ +50°C
0-10V/PWM/Resistance/DALI Dimming, PIR sensor, Photocell
Die-cast Alumimun &Tempered Glass
Silver/Black/Custom
Vertical or Horizontal
Available
125Lm/W 130Lm/W
DALI PWM
145Lm/W 155Lm/W
IP665yrs Warranty
IK0810yrs Warranty
Available Accessories
- 7-pin NEMA receptacle - 10KV Surge protection device included- Non-flickering driver
Extra Features
1-10V
3 0
Mounting options and accessories
By rotating the lens, the light distribution changes direction.
Method A: Slip Fitter Method B: Adjustable Arm Mount Method C: U-shape Bracket
Method D: Direct Arm Mount (Square/Round pole)
for round pole for square pole
Advantages
G e m m a S e r i e s
Polycarbonate lens for maximum intensity.
Delivers improved visual comfort by lower glare and providing a wider, smoother and more formed light.
Cut-off light, no uplight pollution.
External fins to ensure greater heat dissipation
Black Dark Bronze
Color Options
White Metal Grey
High intensity die-cast aluminum body with impact grade that reaches IK08
SPD: 6kV line-to-line protection and10kV line-to-earth protection
Equiped with hinges that allow tool-freedriver panel access
Adjustable light distribution
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Str
ee
t Li
gh
ts
A
B
C
Installation pipe diameter: Ø60mm
843654
843658
843662
843666
843670
843674
AC100-277V 3000K/4000K5000K/6500K
>80>0.95 135Lm/W/165Lm/W
75°x150°/85°x150°/155°x155°
75W
115W
145W
180W
200W
230W
A
mm
600
694
270
350
78
78
75W/115W/145W
180W/200W/230W
B
mm
C
mmWattage
G e m m a S e r i e s
IP6610yrs Warranty IK085yrs
Warranty
135Lm/W 165Lm/W
Inventronics
Philips Lumileds
0-10V/PWM/Timer Dimming, Photocell & PIR sensor
Die-cast Aluminum & PC
Black/Bronze/White/Metal grey
Horizontal/vertical installa-tion for round/square pole
Available
-20°C ~ +45°C
PWM
Available Accessories
- 20KV Surge Protection Device- 7-pin NEMA receptacle- Brackets, Mounting arms & Slip fitters
- 10KV Surge Protection Device included- Non-flickering driver
Extra Features
1-10V
3 4
20°
20°
The color of the photocell can be varied.
Advantages
S a r i n S e r i e s
Accessories
843868Surge protection
device
843869 Adjustable arm
843870 Photocell
High intensity die-cast aluminum body with impact grade that reaches IK08
Elegant, streamlined design
Tempered glass cover
Adjustable arm with +/- 20° bent angle
Surge protection device and photocell cap available
Anti-static & thermostable housing with anti-corrosion treatment
Rotational range
Open Optic lens
Shorting cap or photocell option
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Str
ee
t Li
gh
ts
AC100-277V 3000K/4000K/5000K/5700K 80/90>0.90 150Lm/W
Type IIType IIIType IV-M
843828
843834
843840
843846
843852
843858
843864
40W
60W
80W
100W
120W
150W
200W
A
mm
527593693
240
295304
135
170145
40W/60W
80W/100W/120W150W/200W
B
mm
C
mmWattage
A
B
CInstallation pipe diameter: Ø60mm
S a r i n S e r i e s
150Lm/W
7yrs Warranty
IK08IP66
Sosen/ Meanwell
Philips 3030
1-10V/DALI Dimming, Photocell,
Aluminum &Tempered glass
Grey
Horizontal or vertical installation
Available
-30°C ~ +45°C
Extra Features Available Accessories
- 3 or 7-pin NEMA receptacle- Adjustable pole mounting adaptors
- Non-flickering driver
DALI1-10V
3 8
Dim down to 25% of its dimming
capacity when there is no motion
Light up to its full capacity
when there is motion
OFF at daytime ON at nightime
M i r a S o l a r S e r i e s
Metal Grey
Color Options
Black
Advantages
All-In-One Intergrated design: Solar panel fully intergrated into the fixture.
Simple Installation: No separate battery pack or compicating wiring installation required. All components can be easily replaced.
Smart Control: efficient controller, dimming (timing + power dimming), motion sensor, PIR sensor
Monocrystalline Solar Module and lithium iron prosphate battery
Super High Efficiency of 170LM/W in all wattage options.
Rotating arm: It can be adjusted in multiple angles
Suitable for installing in different latitudes and compined with different forms of lamp posts.
Motion Sensor
Time Sensor
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
So
lar
Str
ee
t Li
gh
ts
843710
843710 843719
843713
843716
843719
843722
843725
10W
15W
20W
25W
30W
40W
AC/DC12V3000K/4000K/6500K >70/ 170Lm/W
150x60°/150x75°
12.8V/12Ah 12.8V/18Ah18V/17W 18V/45W
12.8V/18Ah 12.8V/24Ah18V/35W 18V/70W
12.8V/12Ah 12.8V/24Ah18V/29W 18V/60W
Solar Panel & Battery Information
Item No. Item No.Lithium iron Phosph. Battery
Lithium iron Phosph. BatterySolar Panel Solar Panel
843713 843722
843716 843725
A
mm
643893
11891033
12831283
300300
300300
360430
8282
8282
8282
10W15W
25W20W
30W40W
B
mm
C
mmWattage
Installation pipe diameter: Ø60mm
A
C
B
M i r a S o l a r S e r i e s
170Lm/W
3yrs Warranty
IP65 IK08
Die-cast Aluminum & PC
Grey/Black
Horizontal Pole
Available
-30°C ~ +50°C
Philips Lumileds
/
Adjustable arm &Motion Detector
4 2
Dim down when there is no motion
Light upwhen there is
motion
240°
360°
A t r i a S o l a r S e r i e s
Advantages
Omni Directional: solar panel supports 360° horizontal rotation and 240° vertical tilt, improving system efficiency.
Smart Controls: remote control, dimming (timing & power dimming), motion sensor and PIR sensor available.
High Efficiency: 150LM/W system efficiency in all wattage options.
A mobile application is designed for controling and motitoring the lights through Bluetooth connection.
Monocrystalline Solar panel module and lithium ion battery
Integrated optical les for durability and excellentlight transmittance
Motion Sensor
Rotational range
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
So
lar
Str
ee
t Li
gh
ts
844460
844460
844463
844463
844466
844466
844469
844469
30W
40W
50W
60W
DC12V 3000K/4000K/6500K >70>0.95 150Lm/W150°x65°
AC
B
S1
S2
12V/24Ah18V/60W 780x513x30mm
755x670x30mm12V/33.6Ah
5yrs 25yrs
12V/38.4Ah18V/80W
12V/28.8Ah
Solar Panel & Battery Information
Item No. Li-ion Battery Warranty WarrantySolar Panel Solar Panel Size
Installation pipe diameter: Ø76mm
150Lm/W
5yrs Warranty
IP66 IK08
Aluminum, PC & Tempered Glass
Grey
Pole mounted
Available
-30°C ~ +65°C
/
N/A
PIR Sensor, MPPT Solar controller, Mobile app control
A t r i a S o l a r S e r i e s
A
mm
640640
775260
750260
508250
665250
30W/40W
50W/60W
S1(w/o frame)
B
mmmm
S2(w/o frame)
C
mmmmWattage
4 6
G e m m a S o l a r S e r i e s
Advantages
Ultra High Efficiency: 200LM/W to 220LM/W system efficiency in all wattage options.
Smart Controls: remote control, dimming, built-in PIR/microwave motion sensor and smart controller.
Works in AC and DC voltage equally. USB power and alarm supply in emergency function.
Bifacial solar panels, which increase the overall conversion efficiency by 30%.
Rotatable 300° LED module to adapt to any light angle.
Easy battery replacement and anti-theft technology.
Anti-corrosion tested die-cast aluminum body with impact grade that reaches IK07.
A mobile application is designed for controling and motitoring the lights through Bluetooth connection.
Monocrystalline Silicone Solar panel and Lithium Iron Phosphate Battery
PIR/microwavesensor
Solar panel
Battery
Battery case(Anti-theft
mechanism)
Bracket
Spikes to keep birds away
RotatableLED module
SensorPower switch
Charging port
USB
Upgrade port
LEDs
LED case
LED protection
Features
All-In-One Intergrated design: Solar panel intergrated into the fixture.
Rotating arm: It can be adjusted in multiple angles
Universal Wall mounting For round pole For square pole
Bracket options
Internal structure
Dim down to 0%-30%
of its dimming capacity when
there is no motion
Light up to its full capacity
when there is motion
Gemma Solar Series - Models
Mn Model 10W/15WLEDs: 32 pcs Length: 633 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 3-6 m
S Model 20W/25WLEDs: 32 pcs Length: 793 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 5-7 m
M Model 30W/35WLEDs: 64 pcs Length: 948 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 5-8 m
G Model - 50WLEDs: 64 pcs Length: 1263 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 6-10 m
J Model - 60WLEDs: 96 pcs Length: 1418 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 7-12 m
L Model - 40W/45WLEDs: 64 pcs Length: 1103 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 6-9 m
Rotational range
Motion Sensor
300°
90°
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No.
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
So
lar
Str
ee
t Li
gh
ts
Installation Options
IES Files
Power Lm/W Solar PanelLiFeP04 BatteryBeam AngleCRICCTVoltage
DC12-24V3000K/4000K/6500K
>70
220Lm/W18V/30W
215Lm/W
200Lm/W18V/50W
205Lm/W
210Lm/W 18V/40W
210Lm/W
18V/60W
200Lm/W 18V/70W
210Lm/W 18V/80W
Type IIType IIIType IV
846646
846649
846652
846655
846658
846667
846661
846670
846664
846673
10W 153.6W/12V
15W 154W/12V
20W 230.4W/18V
25W 230W/18V
30W 307.2W/24V
45W 380W/30V
35W 308W/24V
50W 460.8W/36V
40W 384W/30V
60W 537.6W/42V
200Lm/W 210Lm/W 220Lm/W
3yrs Warranty
IP65 IK07
Die-cast aluminum
Grey
Available
-40°C ~ +50°C
Philips Lumileds
/
PIR/microwave sensor, Smart controller
G e m m a S o l a r S e r i e s
A
mm
633793
1103948
12631418
365365
365365
365365
211211
211211
211211
10W/15W20W/25W
40W/45W30W/35W
50W60W
B
mm
C
mmWattage
Installation pipe diameter: Ø60mm
Horizontal/ Vertical instal-lation on round or square pole/ Wall mounted
A
B
C5 2
To establish smart city operation, energy conservation and environmental protection.
Optional light distribution curve available with T2-1, T3-1, TS-1 easy to replace in the future.
A variety of power drivers are available
Lamp will automatically turn on and off according tolux difference.
Easy disassembly for reduced maintenance costs.
To provide a reliable guarantee for LED drive power, extend the life of theproduct and protect from lightnings.
Built-in circuit breaker that activates when luminaire is opened for maintance, to protect theelectricians’safety.
A
A. Wireless control system available
D. Modular LED lens design
B. LED Power Supply
E. Photocell Available
G. Detachable connect baseC. Surge Protection Device
F.Auto electrical disconection
E
B
F C
G
D
Advantages
Optical PC cover, resistant against hightemperatures, aging and ultraviolerradiation
High intensity die-cast aluminumbody with impact grade thatreaches IK09
Modular optical lens design,easy to improve in future
Clip-on design, makes lamp easy to install, maintain and replace
Detachable design and use of fastturn off power protector renderthis luminaire convenient and safefor maintenance
With surge protector device,the luminaire can reach Class I (10KV) or Class II (5-9KV)
O r i o n P a r k S e r i e s
Color Options
Metal Grey Black
Pole color and design can be customized under special terms.
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Pa
rk L
igh
ts
Ø496mm
AC100-277V 3000K/4000K/6500K
>70>0.90 100Lm/W33°x159°40°x159°150°
25190
25196
25193
30W
90W
60W
650mm
Installation pipe diameter: Ø89mm
/
Osram
Die-cast aluminum & PC
Metal Grey/Black
Post-top mounting
Available
100Lm/W
O r i o n P a r k S e r i e s I
IP665yrs Warranty
IK09
-35°C ~ +50°C
Wireless Control System/ Photocell/Dimming
Available Accessories
- Surge Protection Device - Non-flickering Driver
Extra Features
5 6
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Pa
rk L
igh
ts
AC100-277V 3000K/4000K/6500K
>70>0.90 65Lm/W120°843898
843901
30W
60W
Installation pipe diameter: Ø60mm
470mm
Ø400mm
O r i o n P a r k S e r i e s I I
65Lm/W
IP655yrs Warranty
Inventronics
Osram
Pole mounted
Available
Silver Grey
-35°C ~ +50°C
Die-cast aluminum & PC
/
5 8
Method A: Cable suspended
Method B: Side entry
Method C: Post top
Advantages
M i r a P a r k S e r i e s
Silver Grey
Color Options
Multiple mounting options: Cable suspended, side entry and post top installation.
Smooth surface housing with UV stabilized polyeaster powder paint finish for durability and corrosion resistance.
High intensity die-cast aluminum body with impact grade that reaches IK08
Weather-tight design and 3G Vibration ratingensure durability even in harsh environments.
Expertly engineered individual lenses made of optical grade polycarbonate for maximum light intensity, with tempered glass cover to protectthe optics.
Delivers improved visual comfort by lower glareand providing a wider, smoother and moreuniform light.
Mounting options
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Pa
rk L
igh
ts
Installation pipe diameter: Ø60mm
AC100-277V 3000K/4000K/5000K/6500K >80>0.95 125Lm/W145°
843681
843687
843690
843684
25W
75W
120W
50W
Ø460mm 80mm
M i r a P a r k S e r i e s
Meanwell ELG/Philips Xi
Philips Lumileds
1-10W/PWM/Timer Dimming, 3 Timer Modes, Photocell, Sensors
Suspended,Pole mounted
Available
125Lm/W
IP65 IK085yrs Warranty
Silver Grey
-40°C ~ +50°C
Die-cast aluminum &Tempered glass
PWM
Available Accessories
- 10KV or 20KV Surge Protection Device- 7-pin NEMA receptacle
- Non-flickering Driver
Extra Features
1-10V
6 2
8-LED 12-LED 16-LED 20-LED 24-LED
● NEMA compatible
S a t u r n P a r k S e r i e s
High pressure die cast aluminum housing withanti-UV powder coating for durabilityand corrosion resistance.
High intensity die-cast aluminum body with impact grade that reaches IK10
Easily accessible driver compartment
Advantages
Housing options
LEDs arrangement
Easy driver maintenance Intelligent Control
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Pa
rk L
igh
ts
843905
843923
843929
843911
843917
20W
45W
55W
29W
38W AC120-277V >70>0.9 100Lm/W135°x45°135°x135°
30000K/4000K5000K
Installation pipe diameter: Ø76mm
550mm 550mm Ø550mm
Ø206mm
S a t u r n P a r k S e r i e s
IP66 IK105yrs Warranty
100Lm/W
Cree
1-10V/DALI Dimming, Photocell
Pole mounted
Available
Black
-30°C ~ +50°C
Aluminum & PC
Inventronics/ Philips
Available Accessories
- 7-pin NEMA receptacle - 10KV Surge Protection Device included- Non-flickering Driver
Extra Features
DALI1-10V
6 6
LEDs are placed on the upper part of the lamp
P e g a s u s P a r k S e r i e s
Advantages
High intensity die-cast aluminum bodywith impact grade that reaches IK09
Intergrated Driver
Various light distribution options for symmetric or asymmetric lighting effect
Easily accessible driver compartment
Internal structure
LEDs arrangement
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Pa
rk L
igh
ts
487mmØ430mm
844471
844483
844475
844479
25W
60W
35W
45WAC120-240V >70>0.95 135Lm/W80°x157°3000K/4000K/
5000K/5700K
Installation pipe diameter: Ø76mm
P e g a s u s P a r k S e r i e s
IP66 IK095yrs Warranty
135Lm/W
Osram
Pole mounted
Available
Black
-40°C ~ +45°C
Aluminum & PC
Inventronics/ Osram
Extra Features
- 10kV Surge Protection Device included- Non-flickering Driver
Available Accessories
- 7-pin NEMA receptacle- 20kV Surge Protection Device
DALI
1-10V/DALI Dimming, Photocell, Timer dimming
1-10V
7 0
LEDs are placed on the upper part of the lamp
Method A: Post top
Method B: Mast/Column arm
Method C: Cable suspended
A u r o r a P a r k S e r i e s
Advantages
Multiple mounting options: Cable suspended, mast/column arm entry and post top installation.
High intensity die-cast aluminum body with impact grade that reaches IK08
Easily accessible driver compartment
Various light distribution options for symmetric or asymmetric lighting effect
Tempered glass cover
Easy driver maintenance
LEDs arrangement
Mounting options
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Pa
rk L
igh
ts
844487
844499
844503
844507
844491
844495
18W
45W
65W
80W
25W
35WAC120-240V >70>0.95 125Lm/W150°x80°3000K/4000K/
5000K/6500K
681mm
514mm
Installation pipe diameter: Ø76mm
A u r o r a P a r k S e r i e s
IP66 IK085yrs Warranty
125Lm/W
Samsung
1-10V/DALI Dimming, Photocell, Timer dimming
Available
Black
-40°C ~ +45°C
Aluminum & Temp. Glass
Inventronics/ Osram
Suspended,Pole mounted
DALI
Extra Features
- 10kV Surge Protection Device included- Non-flickering Driver
Available Accessories
- 7-pin NEMA receptacle- 20kV Surge Protection Device
1-10V
7 4
LEDs are placed on the upper part of the lamp
V e n u s P a r k S e r i e s
Advantages
Color Options
Elegant design available in two colours.
Smooth polyester powder coated housingand UV-resistanr PC diffuser.
High intensity die-cast aluminum body withimpact grade that reaches IK10.
GoldenWhite
Designed to light parks, squares and pedestrian areas it incorporates direct & indirect lighting photometry.
LEDs arrangement
Color options
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Pa
rk L
igh
ts
AC200-240V
AC120-277V
3000K/4000K/5000K >70>0.95 100Lm/W135°x45°/
135°x135°
843934
843944
843950
843938
20W
55W
73W
38W
Installation pipe diameter: Ø76mm
730mm
Ø460mm
Inventronics/ Philips/ Osram
Cree
1-10V/DALI Dimming
Pole mounted
Available
White/ Golden
-30°C ~ +50°C
Aluminum & PC
IP66 IK105yrs Warranty
100Lm/W
V e n u s P a r k S e r i e s
DALI1-10V
7 8
● Smooth surface to avoid dust & dirt accumulation● Seamless surface to ensure rainwater scouring● Avoids accumulation of leaves, sand or other solid materials, minimizes environment impact on luminare performance.
H a l o P a r k S e r i e s
Advantages
Elegant design, ideal solution for parks, public squares, playgrounds and pathways.
Smooth surface housing with UV stabilized polyester powder paint finish for durability and corrosion resistance.
High intensity die-cast aluminum housing with anti-corrosion treatment
Super High Efficiency of 160LM/W in all wattage options.
High efficiency coatings. Paint and metal parts succefully passed the salt spray test.
Smooth Surface
LEDs arrangement Water resistance
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Pa
rk L
igh
ts
845471
845480
845483
845486
845474
845477
50W
150W
200W
240W
80W
100WAC180-277V >80>0.95 160Lm/W60°/90°/120°2700K/4000K/
6500K
50W/80W/100W/150W 200W/240WInstallation pipe diameter:<Ø60mm
162mm 168mm
Ø380mm Ø500mm
IP665yrs Warranty
-40°C ~ +60°C
Philips Lumileds
Meanwell
1-10V/DALI Dimming
Aluminum
Available
Pole mounted
Grey 160Lm/W
DALI1-10V
H a l o P a r k S e r i e s8 2
Method A.
Method B.
Method C.
Method D.
Metal Grey
Color Options
White BlackPearl Powder
Advantages
Tempered glass with 94% lighttransmittance and IK08 impact grade
High intensity die-cast aluminumbody with impact grade thatreaches IK09
Modular optical lens design,easy to improve in future
Clip-on design, makes lamp easy to install, maintain and replace
O r i o n H a n g i n g S e r i e s
Detachable design and use of fastturn off power protector renderthis luminaire convenient and safefor maintenance
With surge protector device,the luminaire can reach Class I (10KV) or Class II (5-9KV)
Mounting options
Features & Certificates Product ParameterSpecifications
Driver Brand
LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W
Light Distribution Diagram
Dimensions
Operating Temperature
Smart Control Options
IES Files
Installation Options
Color
Material
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
0
30
60
90-90
-60
-30
120
150
-/+180
-150
-120
Type 0
Type II-M
Type I-S
Type II-L
Type I-M
Type III-S
Type I-L
Type III-M
Type II-S
Type III-L
Ha
ng
ing
Str
ee
t Li
gh
ts
25018
25064
25042
60W
120W
90W AC100-277V 3000K/4000K/6500K
>70>0.90 100Lm/W80°x150°
Ø500mm 276mm
O r i o n H a n g i n g S e r i e s
Inventronics
Osram
1-10V/DALI Dimming
Suspended,Pole mounted
Available
100Lm/W
IP66 IK095yrs Warranty
Metal/White/Black/Pearl
-35°C ~ +50°C
Die-cast aluminum &Tempered glass
Available Accessories
- Surge Protection Device - Non-flickering Driver
Extra Features
DALI1-10V
8 6
Base station
→ Long range radio size of a regular photocell; no visible antenna
→ Compact NEMA, internal & decorative; all variants fixture independent
→ Fast and easy Utility-grade metering and GPS
→ Capacity 5,000 works without network
→ Low-cost internet connection
Telecell
→ Discreet size of a regular photocell; no visible antenna
→ Flexible NEMA, internal & decorative; all variants fixture independent
→ Accurate Utility-grade metering and GPS
→ Resilient
works without network
P l a n e t S y s t e m : I n t e l l i g e n t L i g h t i n g f o r S m a r t C i t i e s
Active network
Telensa’s PLANet system turns street lighting into an active network – a network in which switching can be controlled, faults reported, electrical properties interrogated and energy accurately measured. With a full range of devices the system can be applied to all types of lighting fixtures, new and old. It is the complete, modern tele-management tool for today’s street lighting industry.
Energy management and demand-side balancing
The principal requirement for street lighting today is to manage energy effectively. With flexible switching and dimming control and accurate energy measurement, the PLANet solution is an ideal platform for effective management of energy consumption across a whole lighting population. The system is an approved Elexon Central Management System (CMS), so savings in ener-gy consumption can be fully realized financially.
Operating efficiency
The PLANet system enables improvements in efficiency in all areas of operations and maintenance, so the lifetime cost of ownership of street lighting assets is min-imized. Monitoring enables shorter response and repair times, giving a higher level of efficiency and service to the public.
Cost effective solution
The PLANet package is cost effective in helping to protect against rising and increasingly uncertain costs in street lighting provision. The savings enabled by imple-menting the PLANet solution present a strong business case for widespread adoption.
Telecell devices contain:
1. a radio,2. a control processor,3. lighting control and4. monitoring circuitry together with an electricity meter chip.
Each Telecell unit is directly powered off the mains supply it is controlling, either from the NEMA socket or from the mains in the luminaire. There is a range of Telecell units for on/off switching and also dimming.
User interfaceUp to 150,000 lights as standard
Central system
Telecells (on streetlamps,
road signs and in bollards)
Base station1 per 5,000-10,000 lights
Light sensor
Antenna
Radio/Controller
Comprehensive control and monitoring
• Provides extremely flexible switching and dimming control• Allows for special events, days of the week variation and override switching• Enables switching at any daylight Lux level• Includes extensive monitoring of lamp/ballast electrical parameters and mains supply
Broad range of lighting equipment compatibilities
• Works with lamp types including SOX, SON, CDM/O, Cosmopolis, PLL, LED• Operates independently of ballast manufacturer• Supports ballast types such as magnetic or electronic HID ballasts and LED drivers• Enables dimming with 0-10V or DALI ballasts and to any 0-100% permissible power• Suits retrofit or new build deployments• Comprises four TELECELL unit variants for external or internal luminaire fitting
Advanced wireless technology platform
• Uses long range radio infrastructure: 1-3 miles urban and 3-6 miles rural range• Accommodates up to 10,000 TELECELL units per base station• Provides resilient connectivity through multi base station capability• Operates with fewer base stations resulting in a manageable deployment
Commercial and operational
• Realizes financial savings from energy reduction by being an Elexon approved CMS• Assists daily operations with powerful graphical user interface• Integrates into asset management systems via web services (XML) or CSV interfaces• Includes a range of commercial options such as hosted/managed service provision.
Luminaire componentsMain features of the Planet System
Energy reporting
Street light maintenance
Integration with asset management systems
Each TELECELL unit can measure an extensive range of parameters. Readings can be returned using programmed monitoring or ad hoc interrogation.
Measurable parameters include:
The first requirement in managing energy consumption is to be able to measure it accurately. Each TELECELL unit contains a metering chip so cumulative active energy is measured precisely for every fixture. This allows true energy consumption to be shown for any filtered set of lights for any calendar period.
Some of the measurable parameters can be used to generate faults or warnings. These are reported and summarized on a daily basis. On some parameters, thresholds can be set which, when triggered, can cause immediate alarms.
Lamp condition:
• Failure Cycling• Day burning
TELECELL unit:
• Temperature• Missing data (from loss of supply or communication)
Times:
• Switching cycles• Burn hours• BSCP event log
Energy:
• Active energy• Cumulative energy
Electrical:
• Instant power • instant current• Instant power factor• Average power• Average current• Average power factorMains supply:
• Instant voltage• Average voltage• Low voltage• Power cycles
With comprehensive monitoring capabilities, the PLANet system is an effective tool for improving and streamlining maintenance operations, resulting in a better lighting service for the public. The system contributes significantly to delivering an enhanced service by:
The PLANet system can be interfaced to asset management systems allowing the import and export of asset data and fault reporting and generate work orders from those systems. The interfaces range from simple CSV based file transfer to XML based web service interfaces to popular systems such as Mayrise and Pitney Bowes “Confirm”.
Reducing night maintenance inspections:
• Avoids patrolling in dangerous areas• Inspections can be less frequent and carried out in the day time
Fault diagnosis:
• Lamps: failure, cycling, day burning• Ballasts: power factor• Mains supply: power cuts, over voltage• Lost connection: internal wiring, column down
Bulk lamp change policies:
• prompt lamp failure detection means bulk change period can be extended, while maintaining overall outages levels within targets
Reducing repair times:
• Avoids time wasted between night inspections• Understanding lamp failures enables repair to be scheduled more quickly
Improving inventory:
• Monitoring reveals potential discrepancies in inventory
Extending range of information available:
• Mains supply profile• Maintenance operatives’ performance
Switching and dimming control is extremely flexible in the PLANet system. Lights are grouped according to their switching program. There is no limit on the number of groups and programs can be configured with a range of options.
Switching methods:
• by time e.g. 5pm• by solar calendar e.g. 10 min after sunrise• by light level e.g. 10 Lux• combination of these
Standard control programs:
• photocell• part night on/off• part night dim• fixed times
Custom control programs:
• up to 10 switching steps
Days of week control:
• e.g. different switching at weekends
Calendar control:
• special events• seasonal adjustments
Dimming control:
• With 0-10V or DALI ballasts• Dim to any level 0-100% (ballast permitting)
Trimming:
• Optimized/auto trim burning hours
Override:
• Quick switching changes across groups/whole population• respond to incidents• use for maintenance
Load reduction:
• Enables demand-side balancing
Examples:
ΟΝ ΟΝ
ΟFF ΟFF
Dim
12:00 12:0016:00 16:0020:00 20:0004:00 04:0008:00 08:00midnight midnight
Dusk20 Lux
Dusk70 Lux
Down35 Lux
Down5 Lux
Override
Street light monitoring and fault detectionStreet light control
12m
2.5m 14m
Lm [cd/m2] Uo UI TI [%] EIR≥1.50 ≥0.40 ≥0.70 ≤10 ≤0.35
11.2515
18.7520
22.5626.257.56
3.750
Type
III
10m
2.5m 10.5m 2.5m
Lm [cd/m2] Uo UI TI [%] EIR≥1.00 ≥0.40 ≥0.60 ≤15 ≤0.30
11.2515
18.7520
22.5626.257.56
3.750
Type
II
2.5m 7m
9m
2.5m
Lm [cd/m2] Uo UI TI [%] EIR≥1.50 ≥0.40 ≥0.70 ≤10 ≤0.35
11.2515
18.7520
22.5626.257.56
3.750
Type
I
The diagrams above show typical applications of light distribution’s Types I, II and III.- Lighting area width: 21m- Pole spacing: 30m
L i g h t D i s t r i b u t i o n T y p e s
Warranty Policy
Warranty for IINNO-Branded Professional LED LuminairesThis document sets out the warranty policy of IINNO from which you purchase your professional lunimaires.
Terms and Condition
1. This warranty is only applicable to IINNO branded lighting products sold by IINNO Limited (hereinafter referred to as ‘Product’).
2. The warranty is only applicable to the party purchasing the products directly from IINNO (Hereinafter referred to as ‘Purchaser’). Third party products sold by IINNO are not covered under this warranty. With respect to products sold to the Purchaser by IINNO, but not bearing the IINNO name or sub-brands, IINNO makes no warranty of any kind, express or implied, including, without limitation, any warranty of merchantability or fitness for a particular purpose, but will make available to the Purchaser upon request, but only to the extent permitted by law and relevant contracts, the warranties of the manufacturer of the relevant product.
3. No agent, distributor or dealer is authorized to change, modify or extend the terms of the warranty on behalf of IINNO.
4. IINNO warrants that each Product will be free from defects in material and workmanship. The foregoing warranty shall be valid for the period mentioned in the applicable warranty clause for the Products referred to in IINNO’s confirmation of your PI.
5. The warranty term starts from the production date printed on the products used in professional applications.
6. The warranty period is based on a burning behaviour of max. 4000 hours/year. In case of more than 4000 hours/year, the warranty period will be adjusted pro-rata.
7. This warranty only applies when the Product has been properly wired and installed and operated within the electrical values, operating range and environmental conditions provided in the specifications, application guidelines, IEC standards or any other document accompanying the Products.
Additionally, installation must be performed only by authorized personnel, who will establish that the above mentioned precautions will be taken under consideration.
8. This warranty does not apply to damage or failure to perform arising as a result of any Acts of God or from any abuse, existing local network (or Public grid) failure, misuse, abnormal use or use in violation of any applicable standard, code or instructions for use, including without limitation, those contained in the latest safety, industry and/or electrical standards for the relevant region(s).
9. IINNO reserves the right to the validity of a guarantee claim. For this purpose, the Purchaser must return, with sufficient postage, for analysis (enclosing a copy of the delivery note or the invoice).
10. Within the applicable warranty period and on examination IINNO determines to its satisfaction that such Product failed to satisfy this warranty, IINNO will, at its option, repair or replace the Product or the defective part thereof, or reimburse Purchaser the purchase price. For purposes of clarity, ‘repair or replace the Product or the defective part thereof’ does not include any removal or reinstallation activities, costs or expenses, including without limitation, labor costs or expenses.
11. If IINNO chooses to replace the Product and is not able to do so because it has been discontinued or is not available, IINNO may refund the purchaser or replace the product with a comparable product (that can show small deviations in design and product specification).
12. Warranty claims have to be reported and returned to IINNO office within 30 days after discovery, specifying at least the following information (additional information may be required on request):
Details of the failed Products; and for System warranties also details of other components used; Installation date and invoice date;
Detailed problem description, number and % of failures date-code of failure; Application, hours burned and number of switching cycles.
13. Where a warranty claim is justified, IINNO will pay for freight expenses. IINNO may charge Customer for returned Products that are not found to be defective or non-conforming together with the freight, testing and handling costs associated therewith.
14. The warranty and remedies contained in this warranty are the only warranties given by IINNO with respect the Products and are given in lieu of all other warranties, whether express or implied, including without limitation warranties of merchantability or fitness for a particular purpose, which warranties are hereby disclaimed.
15. These terms and conditions state IINNO’s entire liability and obligation to Purchaser and Purchaser’s sole and exclusive remedy in connection with defective or non-conforming Products supplied by IINNO to Customer, whether or not such damages are based on any warranty not explicitly mentioned in these terms and conditions, tort, contract or any other legal theory, even if IINNO has been advised or is aware of such defects.
16. This is a limited warranty and excludes, among other items, installation, providing access to products (scaffolding, lifts, etc.), and special, incidental and consequential damages (such as loss of revenue/profits, damage to property or other miscellaneous costs not previously mentioned), and is further defined by the limitations and conditions set forth in the respective warranty policy and these terms and conditions.
17. Upon request, IINNO’S representatives shall be allowed access to the defective Product, system or application for verification of non-compliance.
18. IINNO cannot be held liable for electrical supply conditions, including supply spikes, over-voltage/under-voltage and Ripple Current control systems that are beyond the specified limits of the products and those defined by relevant supply standards (e.g. EN 50160 norms).
iinno light
iinno light
iinno light
www.iinno-lighting.com
iinno_light
Contact Us
IINNO Intelligent Innovations
Unit 04-05, 16th Floor,The Broadway No. 54-62 Lockhart Road,Wanchai, Hong KongTel: +852 8191 2170, +86 (0)769 23010151/2Email: [email protected]
IINNO Intelligent Innovations
80, Iroon Polytechneiou Str.73100 Chania, Greece Tel: +30 28210 27539 Mob: +30 6977656763 Email: [email protected]