1
CONTENTS
1. COMPANY PROFILE…………………………………………………………… 1
2. PRODUCTION & TEST EQUIPMENT………………………………………… 2
3. HYDRAULIC HOSE SERIES…………………………………………………3-22
SAE 100 R1AT
SAE 100 R2AT
SAE 100 R3
SAE 100 R4
SAE 100R5
SAE 100R6
SAE 100 R7
SAE 100 R8
SAE 100 R9
SAE 100 R12
SAE 100 R13
SAE 100 R15
SAE 100 R16
SAE 100 R17
DIN EN 853 1SN/1ST
DIN EN 853 2SN/2ST
DIN EN 857 1SC
DIN EN 857 2SC
DIN EN856 4SP
DIN EN856 4SH
4. TEFLON HOSE………………………………………………………………23-24
Smoothbore Teflon Hose
Convoluted Teflon Hose
5.WELDING HOSE SERIES…………………………………………………...25-28
Oxygen Hose
Acetylene Hose
Twin Welding Hose
LPG Hose
2
6.INDUSTRIAL HOSE SERIES……………………………………………… 29-34
Air/Water Hose
Fuel Hose
Jack Hammer Hose
Freon Hose
Sand Blast Hose
Chemical Hose
7.SUCTION DISCHARE HOSE SERIES………………………………………35-38
Suction Discharge Water Hose
Suction Discharge Oil Hose
Suction Discharge Acid or Alkali Hose
Cement Suction Delivery Hose
8.FABRIC REINFORCED RUBBER HOSE…………………………………39-43
Fabric Reinforced Air Hose
Fabric Reinforced Water Hose
Fabric Reinforced Oil Hose
Fabric Reinforced Hot Water Hose
Fabric Reinforced Steam Hose
9.PLASTIC SPIRAL HOSE GUARD……………………………………………44
10.SPECIAL RUBBER HOSE…………………………………………………45-48
Wire Braided Steam Hose
Concrete Pump Hose
Rotary Drilling Hose
Dredging Hose
11.PVC HOSE……………………………………………………………………49-56
PVC Clear Hose
PVC Fiber Reinforced Hose
PVC Steel Wire Reinforced Hose
PVC Layflat Hose
PVC Suction hose
PVC Garden Hose
PVC Air Hose
PVC Welding hose
12.AUTOMOTIVE RUBBER HOSE……………………………………………57-59
Air Condition Hose
Car Heater Hose
Textile Reinforced Fuel Hose
3
Products range is as follows:
●Hydraulic Hose
●Industrial Hose
●GOST Standard Rubber Hose
●Special Rubber Hose
●Plastic Hose Guard
●PVC Hose
●Automotive Hose
●Fittings, Adaptors
4
HYDRAULIC HOSE SERIES
SAE Standard
SAE 100R1AT
CONSTRUCTION:
This hose consists of an inner tube of oil-resistant synthetic rubber, a single wire braid reinforcement, and
an oil- and weather-resistant synthetic rubber cover.
APPLICATIONS:
Hose range suitable to carry hydraulic fluids, such as glycol, mineral oils, emulsion, hydrocarbons, etc.
WORKING TEMPERATURE:
From -40°C up to +100°C
Size
(Inch)
Inside Diameter Reinforcement Outside
Diameter
Proof
Pressure
Working
Pressure
Burst
Pressure
Bend
Radius
Nom
(mm)
Min
(mm)
Max
(mm)
Min
(mm)
Max
(mm)
Min
(mm)
Max
(mm) (Bar) (Psi) (Bar) (Psi) (Bar) (Psi) (mm)
3/16" 4.8 4.6 5.4 8.9 10.1 12.5 413 6000 207 3000 827 12000 89
1/4" 6.4 6.2 7.0 10.6 11.7 14.1 379 5500 189 2750 758 11000 102
5/16" 7.9 7.7 8.5 12.1 13.3 15.7 345 5000 172 2500 689 10000 114
3/8" 9.5 9.3 10.1 14.5 15.7 18.1 310 4500 155 2250 620 9000 127
1/2" 12.7 12.3 13.5 17.5 19.0 21.5 276 4000 138 2000 551 8000 178
5/8" 15.9 15.5 16.7 20.6 22.2 24.7 207 3000 103 1500 413 6000 203
3/4" 19.0 18.6 19.8 24.6 26.2 28.6 172 2500 86 1250 345 5000 241
7/8" 22.2 21.8 23.0 27.8 29.4 31.8 155 2250 78 1125 310 4500 279
1" 25.4 25.0 26.4 32.5 34.1 36.6 138 2000 69 1000 276 4000 305
1 1/4" 31.8 31.4 33.0 39.3 41.7 44.8 86 1250 43 625 172 2500 419
1 1/2" 38.1 37.7 39.3 45.6 48.0 52.0 69 1000 34 500 138 2000 508
2" 50.8 50.4 52.0 58.7 61.9 65.9 52 750 26 375 103 1500 635
5
SAE 100R2AT
CONSTRUCTION:
This hose consists of an inner tube of oil-resistant synthetic rubber, two wire braids reinforcement, and an oil- and
weather-resistant synthetic rubber cover.
APPLICATIONS:
Hose range suitable to carry hydraulic fluids, such as glycol, mineral oils, emulsion, hydrocarbons, etc.
WORKING TEMPERATURE:
From -40°C up to +100°C
Size
(Inch)
Inside Diameter Reinforcement Outside
Diameter
Proof
Pressure
Working
Pressure Burst Pressure Bend Radius
Nom
(mm)
Min
(mm)
Max
(mm)
Min
(mm)
Max
(mm)
Min
(mm)
Max
(mm) (Bar) (Psi) (Bar) (Psi) (Bar) (Psi) (mm)
3/16" 4.8 4.6 5.4 10.6 11.7 14.1 689 10000 345 5000 1378 20000 89
1/4" 6.4 6.2 7.0 12.1 13.3 15.7 689 10000 345 5000 1378 20000 102
5/16" 7.9 7.7 8.5 13.7 14.9 17.3 586 8500 293 4250 1171 17000 114
3/8" 9.5 9.3 10.1 16.1 17.3 19.7 551 8000 276 4000 1102 16000 127
1/2" 12.7 12.3 13.5 19.0 20.6 23.1 482 7000 241 3500 965 14000 178
5/8" 15.9 15.5 16.7 22.2 23.8 26.3 379 5500 189 2750 758 11000 203
3/4" 19.0 18.6 19.8 26.2 27.8 30.2 310 4500 155 2250 620 9000 241
7/8" 22.2 21.8 23.0 29.4 31.0 33.4 276 4000 138 2000 551 8000 279
1" 25.4 25.0 26.4 34.1 35.7 38.9 276 4000 138 2000 551 8000 305
1 1/4" 31.8 31.4 33.0 43.2 45.6 49.6 224 3250 112 1625 448 6500 419
1 1/2" 38.1 37.7 39.3 49.6 52.0 56.0 172 2500 86 1250 345 5000 508
2" 50.8 50.4 52.0 62.3 64.7 68.6 155 2250 78 1125 310 4500 635
6
SAE 100R3
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber,two braids of suitable fiber,and an oil and
weather resistant synthetic rubber cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids
WORKING TEMPERATURE:
From -40°C up to +100°C
SIZE SAE I.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Min Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
5 3/16 -03 4.5 5.4 11.9 13.5 10.5 1520 21 3050 42 6090 2.95 75 0.16
6.3 1/4 -04 6.1 7.0 13.5 15.1 8.7 1260 17.5 2540 35 5075 2.95 75 0.18
8 5/16 -05 7.6 8.5 16.7 18.3 8.4 1220 16.8 2440 33.5 4860 3.94 100 0.27
10 3/8 -06 9.2 10.1 18.3 19.8 7.8 1130 15.7 2280 31.5 4570 3.94 100 0.31
13 1/2 -08 12.4 13.5 23.0 24.6 7.0 1015 14 2030 28 4060 4.92 125 0.45
16 5/8 -10 15.6 16.7 26.2 27.8 6.1 885 12.2 1770 24.5 3550 5.51 140 0.53
19 3/4 -12 18.7 19.8 31.0 32.5 5.2 750 10.5 1520 21 3045 5.91 150 0.72
25 1 -16 25.1 26.2 36.9 39.3 3.9 570 7.8 1130 15.7 2280 8.07 205 0.90
32 1 1/4 -20 31.4 32.9 42.9 46.0 2.6 380 5.2 750 10.5 1520 9.84 250 1.07
7
SAE 100R4
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber, a reinforcement consisting of a ply or plies
of woven or braided textile fibers with a suitable spiral of body steel wire, and an oil and weather resistant
synthetic rubber cover.
APPLICATIONS:
This section covers hose for use in low pressure and vacuum applications with petroleum base hydraulic fluids
WORKING TEMPERATURE:
From -40°C up to +100°C
SIZE SAE I.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
19 3/4 -12 18.2 19.8 34.9 2.1 305 4.2 610 8.4 1210 4.92 125 0.92
25 1 -16 24.6 26.2 41.3 1.7 250 3.5 510 7 1015 5.91 150 1.10
32 1 1/4 -20 30.6 33.0 50.8 1.4 200 2.8 410 5.6 810 7.87 200 1.30
38 1 1/2 -24 36.9 39.3 57.2 1.05 150 2.1 305 4.2 610 10.04 255 1.80
51 2 -32 49.2 52.4 69.9 0.7 100 1.4 200 2.8 410 11.81 300 2.23
63 2 1/2 -40 61.9 65.1 82.6 0.4 60 0.85 120 1.7 250 13.98 355 3.23
76 3 -48 74.6 77.8 95.3 0.4 60 0.8 120 1.6 230 18.11 460 4.25
89 3 1/2 -56 87.3 90.5 107.9 0.3 40 0.6 90 1.25 180 20.87 530 5.05
102 4 -64 100.0 103.2 120.7 0.25 40 0.5 70 1 145 24.02 610 5.60
8
SAE 100R5
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber, a single wire braid reinforcement and a
fiber braided cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids.
WORKING TEMPERATURE:
From -40°C up to +100°C
SIZE SAE I.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Min Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
5 3/16 -04 4.8 5.5 12.7 13.7 21 3045 42 6090 84 12180 2.95 75 0.24
6.3 1/4 -05 6.4 7.2 14.3 15.3 21 3045 42 6090 84 12180 3.35 85 0.28
8 5/16 -06 7.9 8.7 16.7 17.6 15.7 2270 31.5 4570 63 9135 3.94 100 0.35
11 13/32 -08 10.3 11.1 18.9 20.0 14 2030 28 4060 56 8120 4.53 115 0.38
13 1/2 -10 12.7 13.7 22.8 24.0 12.2 1770 24.5 3550 49 7105 5.51 140 0.51
16 5/8 -12 15.9 17.0 26.8 28.0 10.5 1520 21 3045 42 6090 6.50 165 0.68
22 7/8 -16 22.2 23.3 30.6 32.2 5.6 810 11.2 1620 22.4 3250 7.28 185 0.70
29 1 1/8 -20 28.6 29.8 37.3 38.9 4.3 620 8.7 1260 17.5 2540 9.06 230 0.80
35 1 3/8 -24 34.9 36.1 43.7 45.2 3.5 510 7 1015 14 2030 10.43 265 0.93
46 1 13/16 -32 46.0 47.2 55.2 57.6 2.4 350 4.9 700 9.8 1420 13.19 335 1.32
60 2 3/8 -40 60.3 61.9 71.8 74.2 2.4 350 4.9 700 9.8 1420 24.02 610 2.96
76 3 -48 76.24 77.8 89.3 91.7 1.4 200 2.8 410 5.6 810 33.07 840 4.10
9
SAE 100R6
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic tuberose braid of suitable fiber, and an oil and
weather resistant synthetic rubber cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids.
WORKING TEMPERATURE:
From -40°C up to +100°C
SIZE SAE I.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Min Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
5 3/16 -03 4.5 5.4 10.3 11.9 3.5 510 7 1015 14 2030 1.97 50 1.10
6.3 1/4 -04 6.1 7.0 11.9 13.5 2.8 410 5.6 810 11.2 1620 2.56 65 0.13
8 5/16 -05 7.6 8.5 13.5 15.1 2.8 410 5.6 810 11.2 1620 2.95 75 0.15
10 3/8 -06 9.2 10.1 15.1 16.7 2.8 410 5.6 810 11.2 1620 2.95 75 0.18
13 1/2 -08 12.4 13.5 19.0 20.6 2.8 410 5.6 810 11.2 1620 3.94 100 0.26
16 5/8 -10 15.6 16.7 22.2 23.8 2.4 350 4.9 710 9.8 1420 4.92 125 0.31
19 3/4 -12 18.7 19.8 25.4 27.8 2.1 310 4.2 610 8.4 1220 5.91 150 0.40
10
SAE 100R7
CONSTRUCTION:
This hose shall consist of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic fiber
reinforcement, and a hydraulic fluid and weather resistant thermoplastic cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids .
WORKING TEMPERATURE:
From -40°C up to +100°C
SIZE SAE I.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
5 3/16 -03 4.6 5.4 11.4 21 3045 42 6090 84 12180 3.54 90 0.073
6.3 1/4 -04 6.2 7.0 13.7 19.2 2780 38.5 5580 77 11165 3.94 100 0.090
8 5/16 -05 7.7 8.5 15.6 17.5 2535 35 5075 70 10150 4.53 115 0.128
10 3/8 -06 9.3 10.3 18.4 15.7 2275 31.5 4565 63 9135 4.92 125 0.155
13 1/2 -08 12.3 13.5 22.5 14 2030 28 4060 56 8120 7.09 180 0.224
16 5/8 -10 15.5 16.7 25.8 10.5 1520 21 3045 42 6090 8.07 205 0.277
19 3/4 -12 18.6 19.8 28.6 8.7 1260 17.5 2535 35 5075 9.45 240 0.330
25 1 -16 25.0 26.4 36.7 7 1015 14 2030 28 4060 11.81 300 0.403
11
SAE 100R8
CONSTRUCTION:
This hose shall consist of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic fiber
reinforcement, and a hydraulic fluid and weather resistant thermoplastic cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids.
WORKING TEMPERATURE:
From -40°C up to +100°C
SIZE SAE I.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
5 3/16 -03 4.6 5.4 14.6 35 5075 70 10150 140 20300 3.54 90 0.086
6.3 1/4 -04 6.2 7.0 16.8 35 5075 70 10150 140 20300 3.94 100 0.097
10 3/8 -06 9.3 10.3 20.3 28 4060 56 8120 112 16240 4.92 125 0.178
13 1/2 -08 12.3 13.5 24.6 24.5 3550 49 7105 98 14210 7.09 180 0.216
16 5/8 -10 15.5 16.7 29.8 19.2 2780 38.5 5580 77 11165 8.07 205 0.312
19 3/4 -12 18.6 19.8 33.0 15.7 2275 31.5 4565 63 9135 9.45 240 0.360
25 1 -16 25.0 26.4 38.6 14 2030 28 4060 56 8120 11.81 300 0.505
12
SAE 100R9
CONSTRUCTION: This hose shall consists of an inner tube of oil resistant synthetic rubber, four spiral plies of steel
wire wrapped in alternating directions, and an oil and weather resistant synthetic rubber cover.
APPLICATIONS: This section covers hose for use with petroleum base hydraulic fluids within a temperature range
of -40℃~+100℃.
SIZE SAE
I.D O.D
Max.W.P P.P B.P MinB.R W.T
A AT
mm inch Dash Min Max Min Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
10 3/8 -6 9.3 10.1 20.6 21.1 31.5 4570 63 9135 126 18270 4.92 125 0.70
12.5 1/2 -8 12.3 13.5 23.8 24.3 28 4060 56 8120 112 16240 7.09 180 0.83
19 3/4 -12 18.6 19.8 30.6 31.9 21 3045 42 6090 84 12180 9.45 240 1.30
25 1 -16 25.0 26.4 38.5 40.5 21 3045 42 6090 84 12180 11.81 300 1.70
31.5 11/4 -20 31.4 33.0 49.2 50.7 17.5 2540 35 5075 70 10150 16.54 420 3.08
38 11/2 -24 37.7 39.3 55.6 14 2030 28 4060 56 8120 19.69 500 4.30
51 2 -32 50.4 52.0 69.9 14 2030 28 4060 56 8120 25.98 660 5.63
13
SAE 100R12
CONSTRUCTION:
This hose shall consists of an inner tube of oil resistant synthetic rubber, four spiral plies of steel wire wrapped in
alternating directions, and an oil and weather resistant synthetic rubber cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids.
WORKING TEMPERATURE:
From -40°C up to +121°C
SIZE SAE I.D W.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Min Max Min Max
Mp
a
Psi
Mp
a
Psi
Mp
a
Psi inch
m
m
Kg/m
10 3/8 -06 9.3 10.1 16.6 17.8 19.5 21.0 28 4060 56 8120 112 16240 4.92 125 0.70
13 1/2 -08 12.3 13.5 19.9 21.5 23.0 24.6 28 4060 56 8120 112 16240 7.09 180 0.83
16 5/8 -10 15.5 16.7 23.8 25.4 26.6 28.2 28 4060 56 8120 112 16240 7.87 200 1.12
19 3/4 -12 18.6 19.8 26.9 28.7 29.9 31.7 28 4060 56 8120 112 16240 9.45 240 1.43
25 1 -16 25.0 26.4 34.1 36.0 36.8 39.4 28 4060 56 8120 112 16240 11.81 300 2.00
32 1 1/4 -20 31.4 33.0 42.7 45.1 45.4 48.6 21 3045 42 6090 84 12180 16.54 420 2.80
38 1 1/2 -24 37.7 39.3 49.2 51.6 51.9 55.0 17.5 2540 35 5075 70 10150 19.69 500 3.40
51 2 -32 50.8 52.0 62.5 64.8 65.1 68.3 17.5 2540 35 5075 70 10150 25.20 640 4.25
14
SAE 100R13
CONSTRUCTION:
This hose shall consists of an inner tube of oil resistant synthetic rubber, multiple spiral plies of heavy steel wire
wrapped in alternating directions, and an oil and weather resistant synthetic rubber cover.
APPLICATION:
This section covers hose for use with petroleum base hydraulic fluids.
WORKING TEMPERATURE:
From -40°C up to +121°C
SIZE SAE I.D W.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Min Max Min Max
Mp
a
Psi
Mp
a
Psi
Mp
a
Psi inch
m
m
Kg/m
19 3/4 -12 18.6 19.8 28.2 29.8 31.0 33.2 35 5075 70 10150 140 20300 9.45 240 2.10
25 1 -16 25.0 26.4 34.9 36.4 37.6 39.8 35 5075 70 10150 140 20300 11.81 300 2.88
32 1 1/4 -20 31.4 33.0 45.6 48.0 48.3 51.3 35 5075 70 10150 140 20300 16.54 420 4.20
38 1 1/2 -24 37.7 39.3 53.1 55.5 55.8 58.8 35 5075 70 10150 140 20300 19.69 500 5.00
51 2 -32 50.4 52.0 66.9 69.3 69.5 72.7 35 5075 70 10150 140 20300 25.20 640 7.00
15
SAE 100R15
CONSTRUCTION:
This hose shall consists of an inner tube of oil resistant synthetic rubber, multiple spiral plies of heavy steel wire
wrapped in alternating directions, and an oil and weather resistant synthetic rubber cover.
APPLICATION:
This section covers hose for use with petroleum base hydraulic fluids.
WORKING TEMPERATURE:
From -40°C up to +121°C
DN Hose I.D Wire
O.D
Hose
O.D
Working
Pressure
Burst Pressure Minimum
Bend Radius
Weight Length
inch mm mm mm Mpa psi Mpa psi mm kg/m meters
19 3/4 19.0 28.4 32.1 34.5 5000 138.0 20000 240 1.68 20/40
25 1 25.4 35.2 38.7 34.5 5000 138.0 20000 300 2.24 20/40
32 11/4 31.8 41.9 50.2 34.5 5000 138.0 20000 420 3.90 20/40
38 11/2 38.1 48.8 57.7 34.5 5000 138.0 20000 500 5.07 20/40
51 2 50.8 63.2 71.5 34.5 5000 138.0 20000 630 7.92 20/40
16
SAE 100R16
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber, steel wire reinforcement according to hose
design (one or two braids), and an oil and weather resistant synthetic rubber cover. A ply or braid of suitable
material may be used over the inner tube and/or over the wire reinforcement of anchor the synthetic rubber to the
wire.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids.
WORKING TEMPERATURE:
From -40°C up to +121°C
SIZE SAE I.D W.D O.D M.D W.P P.P B.P min B.R W.T
mm inch Dash Min Max Max Max
Mi
n
Max
Mp
a
Psi
Mp
a
Psi
Mp
a
Psi inch
m
m
Kg/m
6.3 1/4" -04 6.2 7.0 12.3 14.5 0.8 1.5 35 5075 70 10150 140 20300 1.97 50 0.30
8 5/16" -05 7.7 8.5 13.3 15.7 0.8 1.5 29.7 4305 59.5 8625 119 17255 2.17 55 0.34
10 3/8" -06 9.3 10.1 15.9 18.8 0.8 1.5 28 4060 56 8120 112 16240 2.56 65 0.42
13 1/2" -08 12.3 13.5 19.0 22.0 0.8 1.5 24.5 3550 49 7105 98 14210 3.54 90 0.54
16 5/8" -10 15.5 16.7 22.5 25.4 0.8 1.5 19.2 2780 38.5 5580 77 11165 3.94 100 0.68
19 3/4" -12 18.6 19.8 26.3 29.0 0.8 1.5 15.7 2275 31.5 4565 63 9135 4.72 120 0.80
25 1" -16 25.0 26.4 34.0 36.6 0.8 1.5 14 2030 28 4060 56 8120 5.91 150 1.15
32 1-1/4" -20 31.4 33.0 41.9 44.3 1.0 2.0 11.3 1635 22.7 3290 45.5 6595 8.27 210 1.83
17
SAE 100R17
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber, steel wire reinforcement according to hose
design (one or two braids), and an oil and weather resistant synthetic rubber cover. A ply or braid of suitable
material may be used over the inner tube or over the wire reinforcement of anchor the synthetic rubber to the
wire.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids.
WORKING TEMPERATURE:
From -40°C up to +121°C
SIZE SAE I.D W.D O.D W.P P.P B.P min B.R W.T
mm inch Dash Min Max Max Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
6.3 1/4" -04 6.2 7.0 11.0 13.2 21 3045 42 6090 84 12180 1.97 50 0.169
8 5/16" -05 7.7 8.5 13.0 15.0 21 3045 42 6090 84 12180 2.17 55 0.210
10 3/8" -06 9.3 10.1 15.0 17.0 21 3045 42 6090 84 12180 2.56 65 0.254
13 1/2" -08 12.3 13.5 18.8 21.1 21 3045 42 6090 84 12180 3.54 90 0.466
16 5/8" -10 15.5 16.7 23.6 25.9 21 3045 42 6090 84 12180 3.94 105 0.586
19 3/4" -12 18.6 19.8 27.7 30.3 21 3045 42 6090 84 12180 4.72 125 0.749
25 1" -16 25.0 26.4 35.6 38.6 21 3045 42 6090 84 12180 5.91 150 1.4
18
DIN STANDARD
DIN EN 853 1SN/1ST
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber, a single steel wire braid reinforcement, and
an oil and weather resistant synthetic rubber cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids within a temperature range of
-40°C~+100°C.
SIZE SAE I.D W.D
O.D
W.P P.P B.P min B.R W.T
1ST 1SN
mm inch Dash Min Max Min Max Min Max Max
Mp
a
Psi Mpa Psi Mpa Psi inch
m
m
Kg/m
5 3/16 -03 4.6 5.4 9.0 10.0 11.9 13.5 12.5 25 3625 50 7250 100 14500 3.54 90 0.20
6.3 1/4 -04 6.2 7.0 10.6 11.6 15.1 16.7 14.1 22.5 3260 45 6525 90 13050 3.94 100 0.25
8 5/16 -05 7.7 8.5 12.1 13.3 16.7 18.3 15.7 21.5 3120 43 6235 85 12325 4.53 115 0.31
10 3/8 -06 9.3 10.1 14.5 15.7 19.0 20.6 18.1 18 2610 36 5220 72 10440 5.12 130 0.36
12.5 1/2 -08 12.3 13.5 17.5 19.1 22.2 23.8 21.4 16 2320 32 4640 64 9280 7.09 180 0.45
16 5/8 -10 15.5 16.7 20.6 22.2 25.4 27.0 24.5 13 1885 26 3770 52 7540 7.87 200 0.52
19 3/4 -12 18.6 19.8 24.6 26.2 29.4 31.0 28.5 10.5 1520 21 3045 42 6090 9.45 240 0.65
25 1 -16 25.0 26.4 32.5 34.1 37.1 39.1 36.6 8.8 1280 17.5 2540 35 5075 11.81 300 0.91
31.5 11/4 -20 31.4 33.0 39.3 41.7 44.4 47.6 44.8 6.3 910 15 2175 25 3625 16.54 420 1.30
38 11/2 -24 37.7 39.3 15.6 48.0 50.8 54.0 52.1 5 725 10 1450 20 2900 19.69 500 1.70
51 2 -32 50.4 52.0 58.7 61.7 65.1 68.3 65.5 4 580 8 1160 16 2320 24.80 630 2.00
19
DIN EN 853 2SN/2ST
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber,two braids of steel wire reinforcement, and
an weather resistant synthetic rubber cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids within a temperature range of
-40℃~+100℃.
SIZE SAE I.D W.D
O.D
W.P P.P B.P min B.R W.T
2ST 2SN
mm inch Dash Min Max Min Max Min Max Max
Mp
a
Psi
Mp
a
Psi
Mp
a
Psi inch mm
Kg/
m
5 3/16 -03 4.6 5.4 10.6 11.6 15.1 16.7 14.1 41.5 6020 83 12035 165 23295 3.54 90 0.32
6.3 1/4 -04 6.2 7.0 12.1 13.3 16.7 18.3 15.7 40 5800 80 11600 160 23200 3.94 100 0.36
8 5/16 -05 7.7 8.5 13.7 14.9 18.3 19.9 17.3 35 5075 70 10150 140 20300 4.53 115 0.45
10 3/8 -06 9.3 10.1 16.1 17.3 20.6 22.2 19.7 33 4785 66 9570 132 19140 5.12 130 0.54
12.5 1/2 -08 12.3 13.5 19.0 20.6 23.8 25.4 23.0 27.5 3990 55 7975 110 15950 7.09 180 0.68
16 5/8 -10 15.5 16.7 22.2 23.8 27.0 28.6 26.2 25 3625 50 7250 100 14500 7.87 200 0.80
19 3/4 -12 18.6 19.8 26.2 27.8 31.0 32.6 30.1 21.5 3120 43 6235 85 12325 9.45 240 0.94
25 1 -16 25.0 26.4 34.1 35.7 38.5 40.9 38.9 16.5 2390 32.5 4710 65 9425 11.81 300 1.35
31.5 11/4 -20 31.4 33.0 43.3 45.7 49.2 52.4 49.5 12.5 1810 25 3625 50 7250 16.54 420 2.15
38 11/2 -24 37.7 39.3 49.6 52.0 55.6 58.8 55.9 9 1305 18 2310 36 5220 19.69 500 2.65
51 2 -32 50.4 52.0 62.3 64.7 68.2 71.4 68.6 8 1160 16 2320 32 4640 24.80 630 3.42
20
DIN EN 857 1SC
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber, single steel wire braid reinforcement, and
an oil and weather resistant synthetic rubber cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids within a temperature range of
-40℃~+100℃.
SIZE SAE I.D W.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Min Max Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
6.3 1/4" -04 6.1 6.9 9.6 10.8 13.5 22.5 3260 45 6525 90 13050 2.95 75 0.20
8 5/16" -05 7.7 8.5 10.9 12.1 14.5 21.5 3120 43 6235 86 12470 3.35 85 0.15
10 3/8" -06 9.3 10.1 12.7 14.5 16.9 18 2610 36 5220 72 10440 3.54 90 0.19
12.5 1/2" -08 12.3 13.5 15.9 18.1 20.4 16 2320 32 4640 64 9280 5.12 130 0.23
16 5/8" -10 15.5 16.7 19.8 21.0 23.0 13 1885 26 3770 52 7540 5.91 150 0.29
19 3/4" -12 18.6 19.8 23.2 24.4 26.7 10.5 1520 21 3045 42 6090 7.09 180 0.34
25 1" -16 25.0 26.4 30.7 31.9 34.9 8.8 1280 17.6 2550 35.2 5100 9.06 230 0.4
21
DIN EN 857 2SC
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber, two braids of steel wire reinforcement, and
an oil and weather resistant synthetic rubber cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids within a temperature range of
-40℃~+100℃.
SIZE SAE I.D W.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Min Max Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
6.3 1/4" -04 6.1 6.9 10.6 11.7 14.2 40 5800 80 11600 160 23200 2.95 75 0.30
8 5/16" -05 7.7 8.5 12.1 13.3 16.0 35 5075 70 10150 140 20300 3.35 85 0.34
10 3/8" -06 9.3 10.1 14.4 15.6 18.3 33 4785 66 9570 132 19140 3.54 90 0.42
12.5 1/2" -08 12.3 13.5 17.5 19.1 21.5 27.5 3990 55 7975 110 15950 5.12 130 0.54
16 5/8" -10 15.5 16.7 20.5 22.3 24.7 25 3625 50 7250 100 14500 6.69 170 0.68
19 3/4" -12 18.6 19.8 24.6 26.4 28.6 21.5 3120 43 6235 86 12470 7.87 200 0.80
25 1" -16 25.0 26.4 32.5 34.3 36.6 16.5 2390 33 4785 66 9570 9.84 250 1.15
22
DIN EN 856 4SP
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber, four spiral plies of steel wire wrapped in
alternating directions, and an oil and weather resistant synthetic rubber cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids within a temperature range of
-40°C~+100°C.
SIZE SAE I.D W.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Min Max Min Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
6.3 1/4 -04 6.2 7.0 14.1 15.3 17.1 18.7 45 6525 90 13050 180 26100 5.91 150 0.64
10 3/8 -06 9.3 10.1 16.9 18.1 20.6 22.2 44.5 6450 89 12905 178 25810 7.09 180 0.75
12.5 1/2 -08 12.3 13.5 19.4 21.0 23.8 25.4 41.5 6020 83 12035 166 24070 9.06 230 0.89
16 5/8 -10 15.5 16.7 23.0 24.6 27.4 29.0 35 5075 70 10150 140 20300 9.84 250 1.10
19 3/4 -12 18.6 19.8 27.4 29.0 31.4 33.0 35 5075 70 10150 140 20300 11.81 300 1.50
25 1 -16 25.0 26.4 34.5 36.1 38.5 40.9 28 4060 56 8120 112 16240 13.39 340 2.00
31.5 1 1/4 -20 31.4 33.0 45.0 47.0 49.2 52.4 21 3045 42 6090 84 12180 18.11 460 3.00
38 1 1/2 -24 37.7 39.3 51.4 53.4 55.6 58.8 18.5 2680 37 5365 74 10730 22.05 560 3.40
51 2 -32 50.4 52.0 64.3 66.3 68.2 71.4 16.5 2390 33 4785 66 9570 25.98 660 4.35
23
DIN EN 856 4SH
CONSTRUCTION:
This hose shall consist of an inner tube of oil resistant synthetic rubber,four spiral plies of steel wire wrapped in
alternating directions, and an oil and weather resistant synthetic rubber cover.
APPLICATIONS:
This section covers hose for use with petroleum base hydraulic fluids within a temperature range of
-40°C~+100°C.
SIZE SAE I.D W.D O.D W. P P.P B.P min B.R W.T
mm inch Dash Min Max Min Max Min Max Mpa Psi Mpa Psi Mpa Psi inch mm Kg/m
19 3/4 -12 18.6 19.8 27.6 29.2 31.4 33.0 42 6090 84 12180 168 24360 11.02 280 1.70
25 1 -16 25.0 26.4 34.4 36.0 37.5 39.9 38 5510 76 11020 152 22040 13.39 340 2.50
31.5 1 1/4 -20 31.4 33.0 40.9 42.9 43.9 47.1 32.5 4710 65 9425 130 18850 18.11 460 3.00
38 1 1/2 -24 37.7 39.3 47.8 49.8 51.9 55.1 29 4205 58 8410 116 16820 22.05 560 3.60
51 2 -32 50.4 52.0 62.2 64.2 66.5 69.7 25 3625 50 7250 100 14500 27.56 700 5.00
24
TEFLON HOSE
Smoothbore Teflon Hose
Tube: PTFE hose, for high and low temperature used, anti-corrosive, non-stick.
Cover: SUS304 stainless steel braided, higher pressure resistance, all kinds of couplings can be available.
APPLICATIONS: The hydraulic hose, pneumatic hose and steam hose of the industries of rubber, plastic, clothing,
auto, engine bed, shipbuilding, electrical machinery, diesel alternate liquid, gas, and high corrosive medium
compare to other hose, also have the longer life.
TEMPERATURE RANGE: constant use -50℃~+210℃,instant sue-70℃~+260℃
I.D O.D THICKNESS W.P B.P WEIGHT LENGTH
INCH MM MM MM BAR BAR G/M M/ROLL
1/8" 3.2 6.2 1 256 625 70 ≥50
3/16" 4.8 7.7 0.85 240 570 90 ≥50
1/4" 6 8.8 0.85 232 552 110 ≥50
5/16" 7.9 10.8 0.85 194 540 135 ≥50
3/8" 9.5 12.4 0.85 162 450 165 ≥50
1/2" 12.7 15.9 1 139 425 230 ≥50
5/8" 15.9 19.3 1 101 385 276 ≥50
3/4" 19 22.3 1.2 92 315 405 ≥40
7/8" 22.2 25.8 1.2 80 240 460 ≥40
1" 25.4 29.8 1.5 72 200 510 ≥20
1.1/4" 32 36 2
1.1/2" 38 42 2
2" 50 54 2
25
Convoluted Teflon Hose
Tube: PTFE hose ,for high and low temperature used, anti-corrosive, non-stick.
Cover:SUS304 stainless steel braided, higher the pressure resistance, all kinds of couplings can be available.
APPLICATIONS: The hydraulic hose, pneumatic hose and steam hose of the industries of rubber, plastic, clothing,
auto, engine bed, shipbuilding, electrical machinery, diesel alternate liquid, gas, and high corrosive medium
compare to other hose, also have the longer life.
TEMPERATURE RANGE: Constant use -50℃~+210℃,instant sue-70℃~+260℃
I.D O.D THICKNESS W.P B.P MIN. B.R LENGTH
INCH MM MM MM BAR BAR MM M/ROLL
1/4" 2.75~6.55 9.85~10.55 1 151 450 32 ≥10
5/16" 7.75~8.55 12.25~13.15 1 126 370 36 ≥10
3/8" 9.14~10.25 15.85~16.55 1 105 324 59 ≥10
1/2" 12.45~13.25 18.45~19.35 1 90 270 82 ≥10
5/8" 15.35~16.25 24.85~25.55 1.5 72 255 95 ≥10
3/4" 18.6~19.85 28.25~29.55 1.5 60 231 113 ≥10
7/8" 21.84~22.86 32.25~33.55 2 52 189 145 ≥10
1" 24.89~26.16 35.55~36.85 2 47 144 189 ≥10
26
WELDING HOSE SERIES
Oxygen Hose
Tube: EPDM/SBR blended, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: EPDM/SBR blended, blue, smooth weather and ozone, abrasion resistant
Application: for conveying welding gases
Temperature: -40℃~+90℃
Branding: as request
Standard: EN 559, GOST 9356-75
Length: 30m~100m
Packing: P.V.C. film
ID (mm) Wall thickness
(mm)
Working pressure
(bar)
Burst pressure
(bar)
Bending radius
(mm)
Weight
(kg/m)
5 3.2 20 60 30 0.15
6 3.5 20 60 35 0.17
8 3.5 20 60 50 0.25
9 3.5 20 60 50 0.27
10 3.5 20 60 60 0.29
13 4.5 20 60 60 0.39
16 4.5 20 60 70 0.45
19 5.5 20 60 80 0.58
27
Acetylene Hose
Tube: EPDM/SBR blended, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: EPDM/SBR blended, Red, smooth weather and ozone, abrasion resistant
Application: for conveying welding gases
Temperature: -40℃~+90℃
Branding: as request
Standard: EN 559, GOST 9356-75
Length: 30m~100m
Packing: P.V.C. film
ID (mm) Wall thickness
(mm)
Working pressure
(bar)
Blow up pressure
(bar)
Bending radius
(mm)
Weight
(kg/m)
5 3.2 6.3/20 60 30 0.15
6 3.5 6.3/20 60 35 0.17
8 3.5 6.3/20 60 50 0.25
9 3.5 6.3/20 60 50 0.27
10 3.5 6.3/20 60 60 0.29
13 4.5 6.3/20 60 60 0.39
16 4.5 6.3/20 60 70 0.45
19 5.5 6.3/20 60 80 0.58
28
Twin Welding Hose
Tube: EPDM/SBR blended, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: EPDM/SBR blended, blue, smooth weather and ozone, abrasion resistant
Application: for conveying welding gases
Temperature: -40℃~+90℃
Branding: as request
Length: 50m
Packing: P.V.C. film
Red (acetylene) Blue (oxygen)
ID
(mm)
Wall
thickness
(mm)
Working
pressure
(bar)
Blow up
pressure
(bar)
ID
(mm)
Wall
thickness
(mm)
Working
pressure
(bar)
Blow up
pressure
(bar)
5 3.2 20 60 5 3.2 20 60
6 3.5 20 60 8 3.5 20 60
8 3.5 20 60 8 3.5 20 60
9 3.5 20 60 9 3.5 20 60
10 3.5 20 60 10 3.5 20 60
29
LPG Hose
Tube: NBR, black, smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: orange CR blended, ozone and weather resistant and abrasion-proof, smooth
Application: for conveyance of liquid gas, home burner system, grill, oil-resistant
Temperature: -40℃to~+90℃
Branding: as request
Color: Black, Orange
Length:100m
Packing: P.V.C. film
ID
mm
ID
inch
Wall thickness
mm
WP(bar) BP(bar) Bending radius(mm) WEIGHT(kg/m)
5 3/16 3.0 12 60 18 0.13
6 1/4 3.5 12 60 20 0.15
8 5/16 3.5 12 60 27 0.20
10 3/8 3.5 12 60 33 0.26
30
INDUSTRIAL HOSE SERIES
Air/Water Hose
Tube: SBR blended, black, smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: EPDM/SBR blended, black, or red yellow, weather and ozone resistant
Applications: wide range service in general industrial services, mobiles shop pneumatic tools, etc.
Temperature: -35°C + 80°C
Length: 40, 50, 100M
Packing: transparent P.V.C. film or Weaving bags
ID (mm) ID (inch) Wall (mm) WP (bar) BP (bar) Radius (mm) Weight (kg/m)
6 1/4 3.5 16/20 50/60 35 0.17
8 5/16 3.5 16/20 50/60 50 0.25
10 3/8 3.5 16/20 50/60 60 0.29
13 1/2 4.0 16 48 60 0.37
13 1/2 5.0 20 60 70 0.42
16 5/8 4.0 16 48 80 0.45
16 5/8 4.5 20 60 90 0.48
19 3/4 5.0 16 48 110 0.58
19 3/4 5.5 20 60 125 0.60
25 1 5.0 20 48 130 0.72
25 1 5.5 16 60 150 0.83
32 1-1/4 6.0 10 30 230 0.94
38 1/1-2 6.0 10 30 270 1.08
50 2 7.0 10 30 400 1.80
31
Fuel Oil Hose
Tube: black NITRIL rubber tube, oil and fuel resistant, smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: black smooth NEOPRENE rubber, oil, ozone, weather, abrasion resistant
Applications: in fuel systems like gasoline, diesel fuel, also suitable for loading and unloading tank cars,
automobiles, oil refiner and oil related industrials, etc.
Temperature: -40°C + 100°C
Branding: as request
Length: 40, 50, 100M
Packing: transparent P.V.C. film or Weaving bags
ID (mm) ID (inch) Wall (mm) WP (bar) BP (bar) Radius (mm) Weight (kg/m)
6 1/4 3.5 16/20 50/60 23 0.16
8 5/16 3.5 16/20 50/60 28 0.23
10 3/8 3.5 16/20 50/60 35 0.26
13 1/2 4.0 12 40 53 0.35
13 1/2 4.5 16 50 58 0.42
16 5/8 4.0 12 40 70 0.36
16 5/8 4.5 16 50 78 0.43
19 3/4 4.5 12 40 95 0.45
19 3/4 5.0 16 60 105 0.54
25 1 4.5 12 40 120 0.60
25 1 5.0 16 50 130 0.67
32
Jack Hammer Hose
Tube: EPDM/SBR Blended Spiral or braided polyester reinforcement
Cover: EPDM/SBR blended, wrapped or smooth, abrasion, ozone and sunlight resistant
WP: 300psi, BP: 1200psi
Temperature range: -28°F to 176°F(-33°C~80°C)
Colors available: matt red, yellow, blue, green.
Assembly coupled with universal couplings attached with 2 Band-it clamps each end.
Standard length :100ft/ roll or 50M
Quality standard: EN 559
Specification:
I.D. (Inch) O.D.(Inch) W.P.(PSI) B.P.(PSI) Length
3/4” 1-5/32” 300 1200 100ft or 50M
33
Freon Hose
Application: For the transportation of R12、R22、R502、R134a medium, etc. Widely use in vehicle air
conditioning、air-condition industry freezing device.
Structure: 1. Interior lining is made up of special rubber formula which endure R12、R22、R502、R134a
2. Exterior lining is made up of whether-endurable rubber, strengthen lining is weaving fiber
Color: Red, Yellow, Blue, Black.
Temperature: -30C ~110C
ID OD W.P. B.P. Max Length
MM IN MM Mpa Psi Mpa Psi M
5 3/16 11.5 3.5 500 17.5 2500 100
8 5/16 14.5 3.5 500 17.5 2500 100
10 3/8 17 3.5 500 17.5 2500 100
34
Sand Blast Hose
Application:
Long lasting heavy duty hose exceptionally tough and abrasion resistant for use in the abrasive blasting industry.
This hose will conduct static electricity through the tube compound.
Tube:
Black smooth abrasion resistant rubber, with static dissapating properties
Reinforcement:
Piles of high strength synthetic cord.
Cover:
Black smooth synthetic rubber, abrasion and weather resistant
Temperature Range: -35°C to +80°C
Safety Factor: 3:1
Nominal
inch
I.D. mm O.D. mm Working Pressure
BAR/ PSI
Coil Length
mtr
1/2 13.0 27.0 10 / 150 20
3/4 19.0 34.0 10 / 150 20
1 25.0 39.0 10 / 150 20
1 1/4 32.0 48.0 10 / 150 20
1 1/2 38.0 56.0 10 / 150 20
1 1/2 38.0 60.0 10 / 150 20
2 51.0 72.0 10 / 150 20
2 1/2 64.0 84.0 10 / 150 20
3 76.0 100.0 10 / 150 20
35
Chemical Hose
Multifunctional chemical rubber hose designed to handle 98% of all chemicals ,solvents and corrosive liquids in
both pressure and suction service.
Tube: Modified elastomers
Cover: EPDM compound
Reinforcement: Multiple textile piles with dual helix wire
Working Temperature: -20°F to +160°F(-30℃ to +70℃)
Safety Factor: 4:1
Applications: Chemical transfer in plant chemicals vehicles and ships Chemical treatment Fine Chemicals
Market: Chemical .Paint .Pharmaceutical .Chemical tankers .Sewage treatment plant
ID Rein OD Length Bend radius WP Vacuum Weight
in mm Ply in mm Ft M in mm Psi Kg/cm² mm-Hg Kg/m
1 25.4 2 1.535 39.0 200 60 7 175 200 14 736.6 1.17
1-1/4 31.8 2 1.787 45.4 200 60 8 200 200 14 736.6 1.33
1-1/2 38.1 2 2.035 51.7 200 60 10 250 200 14 736.6 1.58
2 50.8 2 2.575 65.4 200 60 14 350 200 14 736.6 2.24
2-1/2 63.5 2 3.091 78.5 200 60 17 425 200 14 736.6 2.79
3 76.2 2 3.634 92.3 200 60 21 525 200 14 736.6 3.71
4 101.6 4 4.728 120.1 200 60 28 700 200 14 736.6 5.26
6 152.4 4 6.815 173.1 200 60 42 1050 200 14 736.6 8.74
36
SUCTION AND DISCHARGE HOSE SERIES
Suction Discharge Water Hose
Tube: black, smooth, compounded for long wear resistance in handing hard, sharp abrasive materials such as sand,
gravel, shells, stones, etc.
Reinforcement: high strength synthetic cord plus helix wire
Cover: black, corrugated (wrapped finish) synthetic rubber highly resistant to weather, sea-water and abrasion
Application: Dry material suction and delivery hose specially designed for transfer of dry cement, sand gravel,
feed, seeds, etc. by suction, gravity or by pneumatic systems.
Temp Range: -40℃ to 85℃"
I.D O.D W.P. B.P. WEIGHT MAX LENGTH
MM INCH MM MPA MPA KG/M M/ROLL
51 2" 63 10 30 1.72 60
64 2.1/2" 77 10 30 2.37 60
76 3" 91 10 30 3.86 60
102 4" 120 10 30 4.33 60
127 5" 148 10 30 7.23 60
152 6" 175 10 30 10.18 40
37
Suction Discharge Oil Hos
Tube: Black, smooth, nitrile rubber compound
Reinforcement: high strength synthetic cord plus helix wire.
Cover: black, smooth (wrapped finish) high grade chloroprene rubber, compounded for an excellent resistance to
weather, ozone , abrasion and oil
Application: used for delivery and transfer of a wide range of petroleum products.
Temp Range: -40℃ to 100℃"
I.D O.D W.P. B.P. WEIGHT MAX LENGTH.
MM INCH MM MPA MPA KG/M M/ROLL
51 2" 61 0.3~1.0 0.9~3.0 1.4 60
64 2.1/2" 74 0.3~1.0 0.9~3.0 1.8 60
76 3" 87 0.3~1.0 0.9~3.0 2.1 60
90 3.1/2" 102 0.3~1.0 0.9~3.0 3 60
102 4" 115 0.3~1.0 0.9~3.0 3.7 60
127 5" 141 0.3~1.0 0.9~3.0 4.8 40
152 6" 167 0.3~1.0 0.9~3.0 7 40
203 8" 218 0.3~1.0 0.9~3.0 10 20
38
Suction Discharge Acid-Alkali Hose
Tube: black, smooth, per rubber compound
Reinforcement: high strength synthetic cord plus helix wire.
Cover: black, smooth (wrapped finish) per rubber compound
Application: designed to handle a wide range of chemicals, acids and alcohols during production and transport
operations; it is specially recommended for the transfer of industrial waters, Sea water and for use on water
purification works
Temp Range: -40℃ to 120℃"
I.D O.D W.P. B.P. WEIGHT MAX LENGTH
MM INCH MM MPA MPA KG/M M/ROLL
51 2" 61 0.3~1.0 0.9~3.0 1.4 60
64 2.1/2" 74 0.3~1.0 0.9~3.0 1.8 60
76 3" 87 0.3~1.0 0.9~3.0 2.1 60
90 3.1/2" 102 0.3~1.0 0.9~3.0 3 60
102 4" 115 0.3~1.0 0.9~3.0 3.7 60
127 5" 141 0.3~1.0 0.9~3.0 4.8 20
152 6" 167 0.3~1.0 0.9~3.0 7 20
203 8" 218 0.3~1.0 0.9~3.0 10 20
39
Cement Suction Delivery Hose
Application: Dry material suction and delivery hose specially designed for transfer of dry cement, sand gravel,
feed, seeds, etc. by suction, gravity or by pneumatic systems.
Temperature range: -40 ~+85
Construction:
Tube: Black, smooth, compounded for long wear resistance in handling hard, sharp, abrasive materials. It is
anti-static.
Reinforcement: High strength synthetic cord plus helix wire and anti-static copper wire
Cover: Black, smooth (wrapped finish) synthetic rubber, weather, ozone and wear resistant
Length: 20 meters continuous length. Other length is available on request.
PART NO I.D. MM O.D.MM Working Pressure BAR
Burst Pressure
BAR
Weight
Kg/m
CSD 150-3" 76 98 10 30 2.90
CSD 150-4" 102 124 10 30 4.67
CSD 150-5" 127 152 10 30 5.80
CSD 150-6" 152 174 10 30 10.10
40
FABRIC REINFRCED HOSE SERIES
Fabric Reinforced Air Hose
Applications: For delivery of compressed air or inert gases in factories. Mines and construction work, etc. It may
be used to connect the pneumatic tools. pneumatic machines and so on.
Features: Made of excellent air impervious rubber.
Safety Factor: 1:4
I.D.
Ply.
W.P. B.P. MAX. LENGTH
MM INCH MPA MPA M/ROLL
13 1/2" 2~3 0.5~1.0 2.0~4.0 20
16 5/8" 3~4 0.5~1.0 2.0~4.0 20
19 3/4" 3~7 0.5~1.0 2.0~4.0 20
25 1" 4~7 0.5~1.0 2.0~4.0 20
32 1.1/4" 4~7 0.5~1.0 2.0~4.0 20
38 1.1/2" 4~8 0.5~1.0 2.0~4.0 20
51 2" 5~10 0.5~1.0 2.0~4.0 20
64 2.1/2" 5~10 0.5~1.0 2.0~4.0 20
76 3" 5~10 0.5~1.0 2.0~4.0 20
89 3.1/2" 5~12 0.5~1.0 2.0~4.0 20
102 4" 5~12 0.5~1.0 2.0~4.0 20
127 5" 5~12 0.5~1.0 2.0~4.0 20
150 6" 5~12 0.5~1.0 2.0~4.0 20
41
Fabric Reinforced Water Hose
Applications: For water and other neutral liquids at normal temperature in industry, mining, agriculture,
construction work, parks and at home.
Feature: It is excellent in flexibility and aging resistance as well as light in weight.
I.D.
Ply.
W.P. B.P. MAX. LENGTH
MM INCH MPA MPA M/ROLL
13 1/2" 1~3 0.3~1.0 0.9~3.0 20
16 5/8" 2~4 0.3~1.0 0.9~3.0 20
19 3/4" 2~7 0.3~1.0 0.9~3.0 20
25 1" 2~7 0.3~1.0 0.9~3.0 20
32 1.1/4" 3~7 0.3~1.0 0.9~3.0 20
38 1.1/2" 3~8 0.3~1.0 0.9~3.0 20
51 2" 4~10 0.3~1.0 0.9~3.0 20
64 2.1/2" 4~10 0.3~1.0 0.9~3.0 20
76 3" 4~10 0.3~1.0 0.9~3.0 20
89 3.1/2" 4~12 0.3~1.0 0.9~3.0 20
102 4" 4~12 0.3~1.0 0.9~3.0 20
127 5" 4~12 0.3~1.0 0.9~3.0 20
150 6" 4~12 0.3~1.0 0.9~3.0 20
42
Fabric Reinforced Oil Hose
Applications:For delivery of gasoline,kerosene,diesel oil and other mineral oils at room temperature in
factory.Mining oil depot,oil jetty,etc.
Features:It is made of special synthetic rubber possessing excellent oil-resistant character.
Factor of safety:1:4
I.D.
Ply.
W.P. B.P. MAX. LENGTH
MM INCH MPA MPA M/ROLL
13 1/2" 2~3 0.5~1.0 2.0~4.0 20
16 5/8" 3~4 0.5~1.0 2.0~4.0 20
19 3/4" 3~7 0.5~1.0 2.0~4.0 20
25 1" 4~7 0.5~1.0 2.0~4.0 20
32 1.1/4" 4~7 0.5~1.0 2.0~4.0 20
38 1.1/2" 4~8 0.5~1.0 2.0~4.0 20
51 2" 5~10 0.5~1.0 2.0~4.0 20
64 2.1/2" 5~10 0.5~1.0 2.0~4.0 20
76 3" 5~10 0.5~1.0 2.0~4.0 20
89 3.1/2" 5~12 0.5~1.0 2.0~4.0 20
102 4" 5~12 0.5~1.0 2.0~4.0 20
127 5" 5~12 0.5~1.0 2.0~4.0 20
150 6" 5~12 0.5~1.0 2.0~4.0 20
43
Fabric Reinforced Hot Water Hose
Applications: For intermittent conveying of saturated vapor or superheated water at a temperature below 100℃.
Features: Made of excellent heat resistant rubber and materials. It is safe to use.
Factor of Safety: 1:3
I.D.
Ply.
W.P. B.P. LENGTH MAX.
MM INCH MPA MPA M/ROLL
13 1/2" 1~3 0.3~1.0 0.9~3.0 20
16 5/8" 2~4 0.3~1.0 0.9~3.0 20
19 3/4" 2~7 0.3~1.0 0.9~3.0 20
25 1" 2~7 0.3~1.0 0.9~3.0 20
32 1.1/4" 3~7 0.3~1.0 0.9~3.0 20
38 1.1/2" 3~8 0.3~1.0 0.9~3.0 20
51 2" 4~10 0.3~1.0 0.9~3.0 20
64 2.1/2" 4~10 0.3~1.0 0.9~3.0 20
76 3" 4~10 0.3~1.0 0.9~3.0 20
89 3.1/2" 4~12 0.3~1.0 0.9~3.0 20
102 4" 4~12 0.3~1.0 0.9~3.0 20
127 5" 4~12 0.3~1.0 0.9~3.0 20
150 6" 4~12 0.3~1.0 0.9~3.0 20
44
Fabric Reinforced Steam Hose
Application: For intermittent conveying of saturated vapor or superheated water at a temperature below 175℃;
the vapor pressure above 0.4MPa is not allowed.
Features: Made of excellent heat resistant rubber and materials. It is safe to use.
I.D.
Ply.
W.P. B.P. LENGTH MAX.
MM INCH MPA MPA M/ROLL
16 5/8" 4~7 0.5~1.0 2.5~5.0 20
19 3/4" 4~7 0.5~1.0 2.5~5.0 20
25 1" 5~7 0.5~1.0 2.5~5.0 20
32 1.1/4" 5~7 0.5~1.0 2.5~5.0 20
38 1.1/2" 5~8 0.5~1.0 2.5~5.0 20
51 2" 6~10 0.5~1.0 2.5~5.0 20
64 2.1/2" 6~10 0.5~1.0 2.5~5.0 20
76 3" 6~10 0.5~1.0 2.5~5.0 20
89 3.1/2" 6~12 0.5~1.0 2.5~5.0 20
102 4" 6~12 0.5~1.0 2.5~5.0 20
127 5" 6~12 0.5~1.0 2.5~5.0 20
150 6" 6~12 0.5~1.0 2.5~5.0 20
45
PLASTIC SPIRAL HOSE GUARD
Plastic Hose Guard
46
SPECIAL RUBBER HOSE
Wire Braided Steam Hose
Construction: Made of heat-resistant rubber, The reinforcement is braided with Copper facing wire.
Applications: For conveying saturated steam and superheated water continually at a temperature below 150 ℃ or
intermittently at a temperature below 160 ℃ .
47
Concrete Pump Hose
Tube: Abrasion Resistant Conductive Natural And CBR Rubber
Reinforcement: High Tensile Steel Cords
Cover: Abrasion, Ozone And Weather Resistant Pin-Pricked Special Synthetic Rubber
Temperature Range: -40°C/+70°C
Hose I.D. Hose O.D. Working Pressure Burst Pressure Min. Bend
Radius
Wt. Per M.
inch mm mm Mpa Psi Mpa Psi mm kg/m
2" 51 68±1.5 8.5 1230 20 2900 200 2.8
2-1/2
"
64 85±1.5 8.5 1230 20 2900 250 4.3
3" 76 102±1.5 8.5 1230 20 2900 270 6
3-1/2
"
89 116±1.5 8.5 1230 20 2900 290 7.5
4" 102 130±1.75 8.5 1230 20 2900 300 9.1
4-1/2
"
115 143±2 8.5 1230 20 2900 320 10.5
5" 127 158±2 8.5 1230 20 2900 360 12.8
6" 152 186±2 8.5 1230 20 2900 570 17
48
Rotary Drilling Hose
Construction: it is composed of an inner rubber layer protection layer, middle rubber layer, steel wire spiral layer
and external rubber cover
Use: The steel wire spiral drilling rubber hose are used in oil field well cementing. well pulling , petroleum geology
exploration, small drilling machine, water conveyance, coal excavation. Used to carry slurry, normal temperature
water, and other fluids.
Execution Specification: API SPEC 5CT, API SPEC STD 5B, API RP 5C1, API RP 5A5, API RP 5B1, API BUL 5C3 SY/T
6194-2003, GB/T 9253.2-1999, GB/T17745-1999, SY/T 6474-2000, GB/T18052-2000, SY/T 6328-1997
Hose size Inside
Diameter
(mm)
Reinforceme
nt Diameter
mm
Outside
Diameter
(mm)
Working
Pressure Mpa
Proof Pressure
Mpa
Burst Pressure
Mpa
Min.Bend
Radius
(mm) MPA Psi Mpa Psi MPa Psi
2sp-51-15 51±1.0 62±1.0 66±1.5 15 2160 30 4320 45 6480 800
2sp-64-15 64±1.2 75±1.0 79±1.5 15 2160 30 4320 45 6480 1000
2sp-76-15 76±1.4 94±1.5 98±2 15 2160 30 4320 45 6480 1100
2sp-89-15 89±1.4 109±1.5 113±2 15 2160 30 4320 45 6480 1200
2sp-102-15 102±1.5 123±1.5 127±2 15 2160 30 4320 45 6480 1300
4sp-51-35 51±1.0 68±1.0 73±1.5 35 5072 70 10143 87.5 12960 900
4sp-64-35 64±1.2 85±1.0 91±1.5 35 5072 70 10143 87.5 12960 1100
4sp-76-35 76±1.4 98±1.5 103±2 35 5072 70 10143 87.5 12960 1200
4sp-89-35 89±1.4 118±1.5 123±2 35 5072 70 10143 87.5 12960 1300
4sp-102-35 102±1.5 132±1.5 139±2 35 5072 70 10143 87.5 12960 1400
6sp-51-70 51±1.0 76±1.0 82±1.5 70 10143 140 20286 175 25358 1000
6sp-64-70 64±1.2 98±1.0 104±1.5 70 10143 140 20286 175 25358 1200
6sp-76-70 76±1.4 123±1.5 129±2 70 10143 140 20286 175 25358 1300
6sp-89-70 89±1.4 138±1.5 144±2 70 10143 140 20286 175 25358 1400
6sp-102-70 102±1.5 152±1.5 158±2 70 10143 140 20286 175 25358 1600
49
DREDGING HOSE
Performance:
The flange discharge hoses are used for silt/gravels conveyance with Dredgers. The suitable working temperature
is from -20℃ to 50℃. It is convenient to install, flexible to use, safe, abrasion-resistant and bending-resistant.
Technical Parameter:
Conveying medium Completing a set with dredge boat to clear silt,
seawater etc in dredging works
Temperature available -20℃-40℃
ID OD WP BP VP Length
mm inch mm inch Mpa bar Mpa bar Kpa bar m
152 6" 182 7-1/4" 1.2 12 2.4 24 80 0.8 20
203 8" 233 9-1/5" 1.2 12 2.4 24 80 0.8 20
254 10" 284 11-1/5" 1 10 2 20 80 0.8 10
304 12" 340 13-2/5" 1 10 2 20 80 0.8 6-10
350 14" 390 15-2/5" 1 10 2 20 80 0.8 6-10
450 18" 486 19-1/5" 0.7 7 1.5 15 80 0.8 6-10
550 22" 590 23-3/5" 0.7 7 1.5 15 80 0.8 6-10
600 24" 640 25-3/5" 0.7 7 1.5 15 80 0.8 6-10
700 28" 750 29-3/5" 0.7 7 1.5 15 80 0.8 6-10
800 32" 850 33-1/2" 0.5 5 1 10 80 0.8 6-10
1000 40" 1050 41-1/2" 0.5 5 1 10 80 0.8 6
1200 48" 1250 49-1/5" 0.5 5 1 10 80 0.8 6
1300 52" 1350 53-1/5" 0.5 5 1 10 80 0.8 6
50
PVC HOSE SERIES
PVC Clear Hose
Characteristics:
·Made from non-toxic material.
·Light, flexible, transparent pipe body, soft and elastic.
·Size can be revised on requirement.
Application:
·Widely used in low pressure conditions for fitting of sanitary foodstuff industry, machines, civil engineering and
aquatic animals equipment.
·We can produce the high temperature hose up to +120℃ depends on the using environment.
British
Measurement
Metric
Measurement
Length W.P. B.P. Weight Volume
I.D. O.D.
Inch mm mm m/roll Bar Bar Kg/roll CBM/roll
1/4 6 8 100 1.5 5 2.70 0.016
3/8 10 12 100 1.5 4 4.30 0.019
1/2 12 15 50 1.0 4 4.00 0.021
5/8 15 18 50 1.0 3 4.80 0.023
3/4 19 22 50 1.0 3 6.00 0.047
1 25 30 50 1.0 3 13.40 0.070
1-1/4 32 38 50 1.0 3 16.40 0.068
1-1/2 38 44 40 1.0 2.5 19.20 0.122
2 50 58 40 1.0 2.5 33.80 0.226
51
PVC Fiber Reinforced Hose
Applications:
the product is used for conveying water, oil, gas under normal working condition in the factory, farm, ship,
building and family.
Characteristics:
it is flexible, transparent, durable, non-toxic, without order, anti-erosion and adaptable to high pressure
condition.by adding colorful symbol lines on the surface of the hose, it looks more beautiful.
Working temperature:-5℃-+65℃
British
Size
Metric Measurement W.P. B.P. Weigh
t
Packing
Size
Volume
At 23℃
Inch I.D.mm O.D.mm Mts/roll MPa MPa KG/roll D×Hmm m3
13/64" 5 9 170 1.2 3.6 10 420×130 0.023
1/4" 6 10 146 1.2 3.6 10 430×135 0.025
6 11 110 1.2 3.6 10 400×150 0.024
6 12 87 1.2 3.6 10 400×150 0.024
5/16" 8 12 117 1.2 3.6 10 440×150 0.029
8 13 89 1.2 3.6 10 425×145 0.026
8 14 71 1.2 3.6 10 420×145 0.025
3/8" 9 13 106 1.1 3.5 10 430×150 0.027
9 14 81 1.1 3.5 10 425×150 0.027
13/32" 10 14 98 1.1 3.5 10 440×150 0.03
10 15 75 1.1 3.5 10 425×155 0.028
10 16 60 1.1 3.5 10 430×140 0.026
1/2" 12 16 167 0.8 2.4 20 560×180 0.056
12 17 129 0.8 2.6 20 560×200 0.062
12 18 104 0.9 2.8 20 560×185 0.058
1/2" 13 17 156 0.8 2.4 20 560×195 0.061
52
13 18 121 0.8 2.5 20 570×190 0.062
13 19 98 0.9 2.8 20 560×200 0.063
35/64" 14 19 114 0.8 2.4 20 560×210 0.066
14 20 92 0.8 2.4 20 540×220 0.064
5/8" 15 19 138 0.8 2.4 20 630×195 0.077
15 20 107 0.8 2.5 20 580×220 0.074
15 21 87 0.9 2.8 20 580×220 0.074
16 20 130 0.7 2.1 20 580×220 0.074
16 21 101 0.7 2.2 20 580×220 0.074
16 22 82 1 3.5 20 570×205 0.067
45/64" 18 24 75 0.8 2.4 20 570×195 0.063
3/4" 19 23 112 0.6 1.8 20 640×215 0.088
19 24 87 0.7 2.3 20 600×210 0.076
19 25 71 0.8 2.5 20 580×210 0.07
19 26 59 0.9 2.7 20 570×210 0.068
25/32" 20 25 83 0.7 2.1 20 615×210 0.079
20 26 68 0.7 2.3 20 610 ×185 0.069
20 27 57 0.8 2.5 20 590×210 0.073
55/64" 22 30 46 0.8 2.5 20 580×220 0.074
1" 25 29 87 0.4 1.2 20 640×230
0.094
25 30 69 0.5 1.5 20 640×230 0.094
25 31 56 0.6 1.8 20 650×220 0.093
25 32 47 0.6 1.8 20 610×250 0.093
1-1/4" 32 38 67 0.5 1.5 30 770×229 0.136
32 39 57 0.5 1.5 30 770×230 0.136
32 40 49 0.6 1.8 30 760×290 0.167
32 41 43 0.6 2 30 750×250 0.14
1-1/2" 38 45 48 0.5 0.5 30 770×240 0.142
38 46 42 0.5 0.5 30 770×240 0.142
38 47 37 0.6 0.6 30 780×280 0.17
1-3/4" 45 55 47 0.5 1.5 50 960×340 0.313
2" 50 58 54 0.4 1.2 50 980×240 0.23
50 59 48 0.5 1.5 50 980×240 0.23
50 60 43 0.5 1.5 50 980×240 0.23
50 61 38 0.6 1.8 50 930×380 0.33
50 62 35 0.6 1.8 50 930×380 0.33
53
PVC Steel Wire Reinforced Hose
Characteristics:
·This hose, with steel screwing inlaid, which with small bending radius, no smells, non-poison, light, transparent.
·It has good adaptability to hard weather conditions and minus pressure.
·Be enduring of high intensity, strong pulling force, and convenient for installation and transportation.
·Working Temperature: from -5℃ to +65℃
Application:
· Widely used for drawing and conveying water, oil and powder in factories agriculture, engineering, food stuffs
and sanitary lines.
·We can produce the high temperature hose up to +120℃ depends on the using environment.
British Measurement Metric Measurement W.P. B.P. Weight
I.D. Wall Length
Inch mm Thickness M/roll Mpa Mpa Kg/m
3/8 Φ10 2.8-3.0 100 0.5 1.5 0.2
1/2 Φ13 2.8-3.0 100 0.5 1.5 0.23
5/8 Φ16 2.3-2.8 100 0.5 1.5 0.25
3/4 Φ19 2.5-2.8 50 0.5 1.5 0.3
3/4 Φ19 3.6-3.8 50 0.5 1.5 0.4
1 Φ25 1.5-1.7 50 0.35 1.05 0.25
1 Φ25 1.7-1.8 50 0.4 1.2 0.3
1 Φ25 2.6-2.8 50 0.45 1.35 0.4
1-1/4 Φ32 2.3-2.5 50 0.3 0.9 0.5
54
1-1/4 Φ32 3.2-3.5 50 0.4 1.2 0.7
1-3/8 Φ34 2.9-3.0 50 0.3 0.9 0.6
1-1/2 Φ38 2.2-2.3 50 0.2 0.6 0.5
1-1/2 Φ38 3.5-3.8 50 0.35 1.05 0.8
1-1/2 Φ38 4.2-4.5 50 0.45 1.35 0.1
Φ40 3.0-3.5 50 0.25 0.75 0.7
1-3/4 Φ45 3.0-3.3 50 0.25 0.75 0.8
1-3/4 Φ45 3.6-3.7 50 0.35 1.05 1.0
2 Φ50 2.5-2.8 50 0.2 0.6 0.8
2 Φ50 3.2-3.3 50 0.25 0.75 1.0
2 Φ50 3.7-3.8 50 0.35 1.05 1.2
2 Φ50 4.8-4.9 50 0.4 1.2 1.4
2-3/8 Φ58 3.8-4.0 40 0.25 0.75 1.2
2-3/8 Φ58 4.2-4.5 40 0.25 0.75 1.4
2-1/2 Φ64 2.8-3.1 40 0.12 0.36 1.2
2-1/2 Φ64 3.5-3.7 40 0.18 0.54 1.6
2-1/2 Φ64 5.0-5.5 40 0.25 0.75 2.0
3 Φ75 3.8-4.0 40 0.18 0.54 1.8
3 Φ75 4.3-4.7 40 0.2 0.6 2.0
3 Φ75 5.3-5.5 40 0.3 0.9 2.5
3-1/2 Φ89 3.8-4.2 30 0.15 0.45 2.5
3-1/2 Φ89 5.5-6.0 30 0.2 0.6 3.0
4 Φ102 4.2-4.3 30 0.1 0.3 2.6
4 Φ102 5.0-5.3 30 0.15 0.45 3.0
4-1/2 Φ110 5.0-5.2 20 0.3 0.9 4.5
5 Φ127 5.0-5.4 20 0.3 0.9 5.0
6 Φ152 6.0-6.3 20 0.3 0.9 6.0
55
PVC Lay Flat Hose
Description: PVC layflat hose, which was made of Dacron and coated with good quality plastic, has such
advantages as Anti-freezing, anti-pressure, anti-corrosion properties, Easy to move and fold etc. this kind hose has
different specifications from 0.8’’ to 8’’ and working pressure from 0.2Mpa to0.6Mpa. The hoses are suitable for
use on farms, camps, oilrigs, mines, and construction sites.
Inch
Inner
Diameter
(mm) 土 0.3
Pressure Net weight Packing size (100m/roll )
Working Pressure
(Bar)
Bursting Pressure
(Bar)
100m(kg)
土 0.1
D X H (cm)
0.8" 20 2 6 10 50*3cm
3 9 11 50*3cm
4 12 16 50*3cm
6 18 \ 50*3cm
1" 25 2 6 12 50*4cm
3 9 12.5 50*4cm
4 12 15 50*4cm
6 18 20 50*4cm
1-1/4" 32 2 6 13.5 50*5cm
3 9 15 50*5cm
4 12 18 50*5cm
6 18 25 50*5cm
1-1/2" 38 2 6 17.5 50*6cm
3 9 22 50*6cm
4 12 22 50*6cm
56
6 18 \ 50*6cm
2" 51 2 6 22.5 55*8cm
3 9 32 55*8cm
4 12 32 55*8cm
6 18 38 55*8cm
2-1/2" 64 2 6 30 55*10cm
3 9 40 55*10cm
4 12 40 55*10cm
6 18 50 55*10cm
3" 76 2 6 37.5 50*12cm
3 9 55 50*12cm
4 12 55 50*12cm
6 18 60 50*12cm
4" 102 2 6 50 55*16cm
3 9 65 55*16cm
4 12 65 55*16cm
6 18 80 55*16cm
5" 125 2 6 75 55*20cm
3 9 85 55*20cm
4 12 85 55*20cm
6 18 100 55*20cm
6" 150 2 6 90 60*24cm
3 9 105 60*24cm
4 12 105 60*24cm
6 18 130 60*24cm
8" 200 2 6 150 65*32cm
3 9 160 65*32cm
4 12 160 65*32cm
6 18 175 65*32cm
57
PVC Suction Hose
CHARACTERISTICS & APPLICATION:
Being light in weight, with good resistance to the hard weather conditions and minus pressure, and small bending
radius, this hose is used for drawing and conveying water, oil, grain and powder in factories, agriculture and civil
engineering. It is the excellent substitutes for rubber hoses and metal pipes.
SPECIFICATIONS OF PVC SUCTION HOSE
Item No. British
Measurement
Metric Measurement W.P B.P Length Weight
/30M
Packing
Measurement Inside
Dia.
Wall
Thickness
inch (mm) (mm) (bar) (bar) (m) (kg) D(mm)×H(mm)
025 1 25 3.5 8 32 ≤50 12.8 730×220
032 1-1/4 32 4 8 30 ≤50 18.3 800×200
038 1-1/2 38 4 8 26 ≤50 21.4 830×250
051 2 51 4.3 7 24 ≤50 27.5 1000×300
064 2-1/2 64 4.5 6 20 ≤50 39.2 1200×310
076 3 76 5 5 20 ≤50 51.5 1400×330
102 4 102 5.5 5 16 ≤50 75.2 1800×450
127 5 127 5.7 4 13 ≤50 96.2 2000×470
152 6 152 7 4 12 ≤50 137.6 2200×500
58
PVC Garden Hose
Characteristics:
·Colorful, light, flexible, elastic, portable and with excellent adaptability;
·Made from non-toxic ingredients;
·Has good weather and abrasion resistance;
·Has good burst strength, withstands nozzle shut-off.
Application:
·Being widely used for irrigation and washing in the parks, factories and families;
·Gardening, car spray washing, floor cleaning, other daily life uses;
·Be perfect to used with hose reel and accessories.
British
Measurement
Metric Measurement W.P. B.P. Weight Packing Volume
At 23℃
Inch I.D.
mm
O.D.
mm
m/roll MPa MPa kg/roll D×H mm m3
3/8 10 14 15 0.8 2.4 1.5 255×80 0.005
1/2 11.5 15.5 20 0.8 2.4 2.3 340×80 0.009
1/2 12 15.3 30 0.8 2.4 2.82 325×105 0.011
1/2 12 16 100 0.8 2.4 11.5 500×190 0.047
1/2 12 17 30.5 0.8 2.4 4.7 360×120 0.015
5/8 15 19 50 0.7 2.1 7.2 440×155 0.030
5/8 15 20 20 0.7 2.1 3.7 345×135 0.016
5/8 15 20 30.5 0.7 2.1 7.4 450×140 0.028
3/4 19 24 50 0.6 1.8 11.4 530×170 0.047
59
PVC Air Hose
CHARACTERISTICS & APPLICATION:
Being made of high toughness PVC materials and high tensile strength polyester threads as its reinforcement, this
hose can work under higher working pressure. With the features of light weight, wear resistance, erosion and
hardening resistance, good flexibility and excellent adaptability to the extremely cold weather conditions, this hose
can be widely used for some pneumatic tools, pneumatic washing apparatus, compressors, engine components,
machinery service tools, pesticide spraying apparatus and civil engineering pneumatic hammers.
SPECIFICATIONS OF PVC FIBER REINFORCED HOSE
Item
No.
British
Measurement
Metric Measurement Working
Pressure
Bursting
Pressure
Weight
/Roll
Packing size Weight
/meter
I.D O.D. Length D. H.
INCH MM MM M/Roll BAR BAR KG MM MM KG/M
065 1/4" 6.5 12 100 20 95 10 400 130 0.109
075 9/32" 7.5 13 100 20 90 12 450 130 0.121
085 5/16" 8.5 14 100 20 85 13.2 500 140 0.133
010 3/8" 10 16 100 20 80 16.5 520 140 0.168
013 1/2" 13 20 100 20 75 24.5 560 190 0.248
016 5/8" 16 25 100 20 60 39 750 180 0.397
019 3/4" 19 28.5 100 20 52 47.5 880 200 0.485
025 1" 25 34.5 50 15 48 30.5 470 200 0.608
032 1-1/4" 32 44 50 15 46 48.3 560 260 0.981
038 1-1/2" 38 50 50 15 45 56 480 250 1.136
050 2" 50 64 50 10 30 84.5 1000 300 1.716
60
PVC Welding Hose
CHARACTERISTICS and APPLICATIONS:
This product has high working pressure, light, wearable, corrosion/aging/bending resistant, and convenient to use.
It is the ideal special pipe for oxygen and ethane welding equipment and device.
British Size
Metric
Measurement
Length
/Roll
Working
Pressure
Bursting Pressure Weight
/Roll
I.D. O.D.
Inch (mm) (mm) (m) Oxygen Acetylene Oxygen Acetylene (KG/Roll)
(bar) (bar) (bar) (bar)
1/5 5 11.6 50 20 10 60 30 11.7
1/4 6.3 13 50 20 10 60 30 13.7
5/16 8 15 30 20 10 60 30 10.3
3/8 10 17 30 20 10 60 30 12.1
61
AUTOMOTIVE RUBBER HOSE
Air Condition Hose
Description:
Air conditioning hose is used for automotive or domestic air conditioning system. It is a
textile-reinforced rubber hose with a thick inner liner. It can be single braided with reinforcement layer
of rayon or similar textile or it can be a two textile braided layers, separated from each other by a layer
of bonded rubber compound. Both types have an outer cover, which is pricked to allow any refrigerant
gas that has permeated through the reinforcement layer to escape without causing the hose to blister.
It can also be made with a wire-reinforced with an inner liner, a wire reinforcement layer, and an outer
layer of heat-resistant textile reinforcement.
62
Car Heater Hose SAE J20R3
Cover: Black smooth EPDM, With good heat, ozone and weather resistance
Branding: As per your request
Reinforcement: High tensile synthetic textile plies
Tube: Black EPDM suitable for ethylene glycol solutions
Temperature: -30 ~+110 ( peaking to 120 )
Safety Factor: 3:1 Minimum
63
Textile Reinforced Fuel Hose
Cover: Black smooth CR/NBR, with good abrasion, weather and oil resistance.
Branding: As per your request
Reinforcement: High tensile synthetic textile plies.
Tube: Black smooth NBR resistant to petroleum products with an aromatic content not exceeding 40%
Temperature: -40 ~+100 (peaking to 121 )