(866) 295-5512 www.diamaticusa.com
CONCRETE GRINDING & POLISHING TOOLS
PRODUCT CATALOG
HARDNESS CHARTChoosing the Correct Diamond Bond
It is crucial to the success of your grinding and polishing jobs to select the diamond bond which correctly matches the concrete density of the slab you are working on. While 80% of concrete can be ground or polished with medium bond diamonds, there will be many instances where you will need a different strength bond in order to be effective.
Hard concrete means soft bond tooling is required. If a medium bond diamond is not cutting fast enough or is glazing over, you need to move to a softer bond diamond.
Soft concrete means hard bond tooling is required. If you have a diamond that is wearing too quickly, you will need to select a harder bond in order to increase life span and production.
In our catalogue, you will find options for any slab or stone work that may require special tooling. Whether it be extra soft, soft, medium, hard or extra hard, wet or dry, there is an appropriate choice in the offering for you.
At Diamatic® we thank you for your consideration and patronage. We are 100% confident you will find our diamond tooling to be cutting edge, competitive and productive.
Go to ultraflor.com to see a step-by-step process to produce a polished floor. While you are there, you can download one of our specifications specially created to meet your customers needs or call (866) 295-5512 and get trained today!
5500 - 6000 PSI
CONCRETE HARDNESSHARD CONCRETE SOFT CONCRETE
4000 - 5500 PSI 3000 - 4000 PSI 2500 - 3000 PSI < 2500 PSIEXTRA SOFT BONDSUPER SOFT BOND SOFT BOND MEDIUM BOND HARD BOND EXTRA HARD BOND
> 6000 PSI
BlackExtra Soft Bond Extra Soft Bond Diamonds for floors that have been power troweled or burned. For use on hard concrete at 5500 to 6000 PSI.
RedSoft Bond Soft Bond Diamonds for floors that have been power troweled or burned. For use on hard concrete above 4000 to 5500 PSI.
GreenMedium Bond Medium Bond Diamonds for average strength concrete floors with strengths between 3000 to 4000 PSI.
BlueHard Bond Hard Bond Diamonds for soft floors that are less than 3000 PSI or for coating and epoxy removal.
OrangeExtra Hard Bond Extra Hard Bond Diamonds for soft floors that are 2500 PSI or below. Can also be used for coating and epoxy removal.
GoldSuper Soft Bond Super Soft Bond Diamonds for floors that have been hand troweled to a cream surface. For use on extremely hard concrete at 6000 PSI or above.
PART NO. GRIT SEGMENTS BOND COLOR
DIA707320S-2 18/20 Double Soft Red
DIA707320S-2 18/20 Single Soft Red
BFL708340S-2 30/40 Double Soft Red
DIA707340S-2 30/40 Single Soft Red
BFL708380S-2 60/80 Double Soft Red
DIA707380S-2 60/80 Single Soft Red
BFL7083140S-2 120/140 Double Soft Red
DIA7073140S-2 120/140 Single Soft Red
PART NO. GRIT SEGMENT BOND COLOR
BFL708320VS-2 18/20 Double Super Soft Gold
BFL708340VS-2 30/40 Double Super Soft Gold
BFL708380VS-2 60/80 Double Super Soft Gold
PART NO. GRIT SEGMENTS BOND COLOR
DIA707320-2 18/20 Double Medium Green
DIA707320-2 18/20 Single Medium Green
BFL708340-2 30/40 Double Medium Green
DIA707340-2 30/40 Single Medium Green
BFL708380-2 60/80 Double Medium Green
DIA707380-2 60/80 Single Medium Green
BFL7083140-2 120/140 Double Medium Green
DIA7073140-2 120/140 Single Medium Green
PART NO. GRIT SEGMENTS BOND COLOR
DIA707320H-2 18/20 Double Hard Blue
DIA707320H-2 18/20 Single Hard Blue
BFL708340H-2 30/40 Double Hard Blue
DIA707340H-2 30/40 Single Hard Blue
BFL708380H-2 60/80 Double Hard Blue
DIA707380H-2 60/80 Single Hard Blue
BFL7083140H-2 120/140 Double Hard Blue
DIA7073140H-2 120/140 Single Hard Blue
PART NO. GRIT SEGMENTS BOND COLOR
BFL708320XH-2 18/20 Double Extra Hard Orange
BFL708340XH-2 30/40 Double Extra Hard Orange
BFL708380XH-2 60/80 Double Extra Hard Orange
BFL7083140XH-2 120/140 Double Extra Hard Orange
PART NO. GRIT SEGMENT BOND COLOR
BFL708320XS-2 18/20 Double Extra Soft Black
BFL708340XS-2 30/40 Double Extra Soft Black
BFL708380XS-2 60/80 Double Extra Soft Black
BFL7083140XS-2 120/140 Double Extra Soft Black
SUPER SOFT BOND
EXTRA SOFT BOND
SOFT BOND
MEDIUM BOND
HARD BOND
EXTRA HARD BOND
The Buffalo Diamond Wing is a premium
metal bond segment featuring a 14
millimeter segment size. This larger
segment, coupled a 30 to 35% diamond
content makes the Buffalo Diamond
Wing an industry leader in longevity and
consistency. Buffalo Diamond Wings are
perfect for coating removal and concrete
preparation during the polishing process.
BUFFALO DIAMOND WINGS
METAL DIAMOND TOOLS
PART NO. GRIT SEGMENT BOND COLOR
DIA-18/20PLUG-XS 18/20 10 Extra Soft Black
DIA-30/40PLUG-XS 30/40 10 Extra Soft Black
DIA-60/80PLUG-XS 60/80 10 Extra Soft Black
DIA-120/140PLUG-XS 120/140 10 Extra Soft Black
METAL DIAMOND TOOLS
EXTRA SOFT BOND
The Diamatic® 10 Segment Metal
Diamonds are perfect for coatings
removal, demolition and surface
preparation, where heavy grinding is
required. Due to the cutting nature of
this diamond bond it is recommended
only for use on heavy platform machines
such as the BMG-735 or BMG-780.
10 SEGMENT DIAMONDS
PART NO. GRIT SEGMENT BOND COLOR
DIA-18/20PLUG-S 18/20 10 Soft Red
DIA-30/40PLUG-S 30/40 10 Soft Red
DIA-60/80PLUG-S 60/80 10 Soft Red
DIA-120/140PLUG-S 120/140 10 Soft Red
SOFT BOND
PART NO. GRIT SEGMENT BOND COLOR
DIA-18/20PLUG 18/20 10 Medium Green
DIA-30/40PLUG 30/40 10 Medium Green
DIA-60/80PLUG 60/80 10 Medium Green
DIA-120/140PLUG 120/140 10 Medium Green
MEDIUM BOND
PART NO. GRIT SEGMENT BOND COLOR
DIA-18/20PLUG-H 18/20 10 Hard Blue
DIA-30/40PLUG-H 30/40 10 Hard Blue
DIA-60/80PLUG-H 60/80 10 Hard Blue
DIA-120/140PLUG-H 120/140 10 Hard Blue
HARD BOND
PART NO. GRIT SEGMENT BOND COLOR
DIA-18/20PLUG-XH 18/20 10 Extra Hard Orange
DIA-30/40PLUG-XH 30/40 10 Extra Hard Orange
DIA-60/80PLUG-XH 60/80 10 Extra Hard Orange
DIA-120/140PLUG-XH 120/140 10 Extra Hard Orange
EXTRA HARD BOND
FLOOR PREP & REMOVAL TOOLS
Our bush hammer and star wheel tools
are ideal for thick coating removal, such
as parking deck materials and overlays.
Both tools are easy to use. Due to the
aggressive nature of the tools, high
production rates can be expected.
MILLING HEAD & BUSH HAMMER
PART NO. DESCRIPTION HEADS
E10240 Cutter Plate with 5 Bush Hammers 5
E09119 / Set Replacement Bush Hammer (specify 9 or 15) 5
BG11880 Fork (requires 3) N/A
BG11879 Buffer Disc (requires 3) N/A
BG11878 Grommets (requires 12) N/A
BE0608 Retaining Ring (requires 3) N/A
BE0204/BE0584 Bolt & Spring Washer (9 each) N/A
BE0030 Bolt (requires 3) N/A
BE0314 Washer (requires 6) N/A
BUSH HAMMER
STAR WHEEL CUTTERPART NO. DESCRIPTION HEADS
BG300117-1 Cutter Plate with 5 Star Wheel Cutters 5
BG300109 Replacement Star Wheel Cutters (specify 9 or 15) 5
PART NO. DESCRIPTION DIRECTION
BG200995L Full Round PCD Wing Left
BG200995 Full Round PCD Wing Right
FULL ROUND PCD
Diamatic’s PCD Poly Crystalline
Diamonds are among the most
aggressive in the industry. Ideal for
coatings removal and floor preparation
these diamonds yield high production
rates. Our PCD diamonds can be used
on any of our platform machines.
PCD - POLY CRYSTALLINE DIAMONDS
QUARTER ROUND PCDPART NO. DESCRIPTION DIRECTION
BG200999L-2 Quarter Round PCD Wing Left
BG200999-2 Quarter Round PCD Wing Right
SPLIT SEGMENT PCDPART NO. DESCRIPTION GRIT
BG200997-2 Split Segment Diamond Wing PCD 18/20
TRANSITIONAL TOOLS
Our ceramic bond diamond tools are the
perfect transition from metals to resins.
Use them to remove metal scratches,
while saving steps on the process.
These long life diamonds are made from
ceramic resin reducing heat transfer.
It’s recommended these diamonds be
used after the 60/80 grit metal bonds
and before the 200 or 400 resin steps to
produce an excellent finish.
CERAMIC BOND DIAMOND TOOLS
3” CERAMIC BOND TRANSITIONAL PUCKSPART NO. BOND GRIT STEP
PA-103030 Ceramic 30 #0
PART NO. BOND GRIT STEP
PA-103050 Ceramic 50 #1
PART NO. BOND GRIT STEP
PA-103100 Ceramic 100 #2
PART NO. BOND GRIT STEP
PA-103400 Ceramic 400 #3
10mm thick copper/metal bond that are
designed to cut like a metal, yet provide
a more refined scratch pattern like a
resin. These semi metals were designed
for use on heavier platform machines
from 800 to 1500 lbs.
SEMI METALS PART NO. GRIT DIAMETER HEIGHT BOND COLOR
DIASEMI30 30 3” 10mm Copper/Metal Olive
DIASEMI50 50 3” 10mm Copper/Metal Blue
DIASEMI100 100 3” 10mm Copper/Metal Yellow
SEMI METAL PUCKS
Available with or without boss/locating pin
RESIN DIAMOND TOOLS
High quality, long-life resin used under
larger platform machines. Thick rubber
backed 3” tool made with a softer resin
compound, which allows the diamonds
to hit uneven floors and wear evenly.
FLEXRES POLISHING RESINS
PART NO. GRIT DIAMETER HEIGHT COLOR
DIA3HYBRID50 50 3” 12mm Blue
DIA3HYBRID100 100 3” 12mm Yellow
DIA3HYBRID200 200 3” 12mm Orange
DIA3HYBRID400 400 3” 12mm Red
DIA3HYBRID800 800 3” 12mm Green
DIA3HYBRID1500 1500 3” 12mm Aqua
DIA3HYBRID3000 3000 3” 12mm Brown
FLEXRES HYBRID RESIN PUCKS
High quality, long life span resin used
under larger platform machines. Thick
rubber backed 3” tool made with a
harder resin compound for increased
productivity under heavier machines.
SUPER FLEX POLISHING RESINS
PART NO. GRIT DIAMETER HEIGHT COLOR
DIASUPERFLEX50 50 3” 15mm Blue
DIASUPERFLEX100 100 3” 15mm Yellow
DIASUPERFLEX200 200 3” 15mm Orange
DIASUPERFLEX400 400 3” 15mm Red
DIASUPERFLEX800 800 3” 15mm Green
DIASUPERFLEX1500 1500 3” 15mm Aqua
DIASUPERFLEX3000 3000 3” 15mm Brown
SUPER FLEX HYBRID RESIN PUCKS
Quality 3mm resins for use under light
polishing machines of 400 lbs or less.
REFINE I RESINS3” ELITE RESIN PADS
RESIN DIAMOND TOOLS
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS800400 400 3” 3mm Red
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS800800 800 3” 3mm White
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS800200 200 3” 3mm Blue
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS800100 100 3” 3mm Black
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS8001500 1500 3” 3mm Yellow
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS8003000 3000 3” 3mm Green
RESIN DIAMOND TOOLS
These popular resins can be used on
any size grinding machine. These resins
are 6mm thick and create a high quality
floor.
REFINE II RESINS3” ELITE RESIN PADS
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS800200-2 200 3” 6mm Yellow
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS800400-2 400 3” 6mm Blue
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS800100-2 100 3” 6mm Red
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS80050-2 50 3” 6mm Bright Green
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS800800-2 800 3” 6mm Green
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS8001500-2 1500 3” 6mm Orange
PART NO. GRIT DIAMETER HEIGHT COLOR
DIAITS8003000-2 3000 3” 6mm Pink
FLOOR PADS
Quality high-speed diamond
impregnated burnishing pad. For use on
concrete and stone during the polishing
process. These pads contain high
diamond content, utilizing extremely
hard diamonds that are baked into
the hog hairs of the pad. Expected
production rates of 15,000 to 20,000
square feet. Available in 200 through
3000 grits.
27” DIAMATIC FLOR GRIT PADS
27” FLOR GRIT PADSPART NO. GRIT DIAMETER COLOR
DIA-109200E 200 27” Blue
PART NO. GRIT DIAMETER COLOR
DIA-109400E 400 27” Yellow
PART NO. GRIT DIAMETER COLOR
DIA-109800E 800 27” Orange
PART NO. GRIT DIAMETER COLOR
DIA-109150E 1500 27” White
PART NO. GRIT DIAMETER COLOR
DIA-109300E 3000 27” Red
FLOOR PADS
LYNX® Resin Fiber Pads were made to:
• Increase production on concrete
• Rejuvenate the floor with one system
• Can be run wet or dry
• Are high density and long life
• Made to hold up under the weight and
RPM’s of todays machines
• Produce a polished floor with high DOI
• Production ranges from 10,000-
20,000 sq. feet
LYNX® POLISHING PADS
LYNX® PADSPART NO. DESCRIPTION GRIT DIAMETER
DIA-LYNX750 Lynx Pad for BMG-555 50 7”
DIA-LYNX950 Lynx Pad for BMG-735 and BMG-780 50 9”
DIA-LYNX1150 SASE, HTC and Husqvarna Machines 50 11”
DIA-LYNX1550 Lynx Pad for BMG-735P XL 50 15”
PART NO. DESCRIPTION GRIT DIAMETER
DIA-LYNX7100 Lynx Pad for BMG-555 100 7”
DIA-LYNX9100 Lynx Pad for BMG-735 and BMG-780 100 9”
DIA-LYNX11100 SASE, HTC and Husqvarna Machines 100 11”
DIA-LYNX15100 Lynx Pad for BMG-735P XL 100 15”
PART NO. DESCRIPTION GRIT DIAMETER
DIA-LYNX7200 Lynx Pad for BMG-555 200 7”
DIA-LYNX9200 Lynx Pad for BMG-735 and BMG-780 200 9”
DIA-LYNX11200 SASE, HTC and Husqvarna Machines 200 11”
DIA-LYNX15200 Lynx Pad for BMG-735P XL 200 15”
PART NO. DESCRIPTION GRIT DIAMETER
DIA-LYNX7400 Lynx Pad for BMG-555 400 7”
DIA-LYNX9400 Lynx Pad for BMG-735 and BMG-780 400 9”
DIA-LYNX11400 SASE, HTC and Husqvarna Machines 400 11”
DIA-LYNX15400 Lynx Pad for BMG-735P XL 400 15”
PART NO. DESCRIPTION GRIT DIAMETER
DIA-LYNX7800 Lynx Pad for BMG-555 800 7”
DIA-LYNX9800 Lynx Pad for BMG-735 and BMG-780 800 9”
DIA-LYNX11800 SASE, HTC and Husqvarna Machines 800 11”
DIA-LYNX15800 Lynx Pad for BMG-735P XL 800 15”
PART NO. DESCRIPTION GRIT DIAMETER
DIA-LYNX71500 Lynx Pad for BMG-555 1500 7”
DIA-LYNX91500 Lynx Pad for BMG-735 and BMG-780 1500 9”
DIA-LYNX111500 SASE, HTC and Husqvarna Machines 1500 11”
DIA-LYNX151500 Lynx Pad for BMG-735P XL 1500 15”
PART NO. DESCRIPTION GRIT DIAMETER
DIA-LYNX73000 Lynx Pad for BMG-555 3000 7”
DIA-LYNX93000 Lynx Pad for BMG-735 and BMG-780 3000 9”
DIA-LYNX113000 SASE, HTC and Husqvarna Machines 3000 11”
DIA-LYNX153000 Lynx Pad for BMG-735P XL 3000 15”
PLATES
PART NO. DESCRIPTION DIAMETER
DIA-LYNXPLATE-5 Velcro Foam Backing Pad 7”
DIA-LYNXPLATE-7 Velcro Foam Backing Pad 9”
DIA-LYNXPLATE-15 Velcro Foam Backing Pad 15”
PART NO. DESCRIPTION DIAMETER
DIA-LYNXPLATE-HTCSASE Velcro Foam Backing Pad for HTC and SASE
11”
DIA-LYNXPLATE-HSQ Velcro Foam Backing Pad for Husqvarna
11”
CUP WHEELS
Used for edging these aggressive
grinding wheels provide a superb finish.
One tool for hard and soft concrete that
eliminates gouging and blends well with
the floor.
ULTRA EDGE® TRANSITIONAL CUP WHEEL
ULTRA EDGE® TRANSITIONAL CUP WHEELSPART NO. GRAIN GRIT DIAMETER
DIA-695363D-2 Coarse 30 4”
DIA-695364D-2 Coarse 50 4”
DIA-695365D-2 Medium 100 4”
DIA-695366D-2 Fine 270 4”
DIA-695367D-2 Fine 400 4”
PART NO. GRAIN GRIT DIAMETER
DIA-695368D-2 Coarse 30 5”
DIA-695369D-2 Coarse 50 5”
DIA-695370D-2 Medium 100 5”
DIA-695371D-2 Fine 270 5”
DIA-695372D-2 Fine 400 5”
PART NO. GRAIN GRIT DIAMETER
DIA-695352D-2 Coarse 30 7”
DIA-695361D-2 Coarse 50 7”
DIA-695353D-2 Medium 100 7”
DIA-695354D-2 Fine 270 7”
DIA-695362D-2 Fine 400 7”
Concrete cleaning, thin coating removal,
edging and concrete removal. Cup
wheels with fewer segments offer faster,
more aggressive grinding. Cup wheels
with more segments provide smoother
finishing and longer life.
CUP WHEELS5” CUP WHEELS
PART NO. SEGMENTS DIAMETER
CG-5TSEG 10-T Seg 5”
PART NO. SEGMENTS DIAMETER
CG-59ETB 9 5”
PART NO. SEGMENTS DIAMETER
CG-18ETB 18 5”
PART NO. GRIT DIAMETER
CGF5BTD 10/20 5”
CGF5BTD5060 50/60 5”
CGF5BTD120140 120/140 5”
CUP WHEELS & PCD WHEELS
CUP WHEELS7” CUP WHEELS
PART NO. SEGMENTS DIAMETER
CG7ASEG 10-Arrow Seg 7”
PART NO. SEGMENTS DIAMETER
CG7TSEG 14-T Seg 7”
PART NO. SEGMENTS DIAMETER
CG712ETB 12 7”
PART NO. GRIT DIAMETER
CGF7BTD 10/20 7”
CGF7BTD5060 50/60 7”
CGF7BTD120140 120/140 7”
PART NO. SEGMENTS DIAMETER
CG724ETB 24 7”
PART NO. SEGMENTS DIAMETER
CG712ETB5/8-11 12 7” (5/8”-11)
PART NO. SEGMENTS DIAMETER
CG724ETB5/8-11 24 7” (5/8”-11)
Extremely aggressive PCD diamond cup
wheels. Excellent for cutting glues and
mastics from floors.
PCD WHEELS PART NO. SEGMENTS DIAMETER
CG5PCD4 4 5”
PART NO. SEGMENTS DIAMETER
CG7PCD6 6 7”
PCD WHEELS
HAND TOOLS
For use with 5” and 7” polishing tools
and grinders, on stone or concrete, wet
or dry.
HAND TOOL RESIN PADS
PART NO. GRIT DIAMETER
PP-D5050 50 5”
DIASC9P7050 50 7”
ECONOMY HAND TOOL RESIN PADS
PART NO. GRIT DIAMETER
PP-D5100 100 5”
DIASC9P7010 100 7”
PART NO. GRIT DIAMETER
PP-D5200 200 5”
DIASC9P7020 200 7”
PART NO. GRIT DIAMETER
PP-D5400 400 5”
DIASC9P7040 400 7”
PART NO. GRIT DIAMETER
PP-D5800 800 5”
DIASC9P7080 800 7”
PART NO. GRIT DIAMETER
PP-D51500 1500 5”
DIASC9P7150 1500 7”
PART NO. GRIT DIAMETER
PP-D53000 3000 5”
DIASC9P7300 3000 7”
PART NO. DESCRIPTION DIAMETER
PP-D5 5” 5” Backing Pad 5”
PP-D7 7” 7” Backing Pad 7”
The Premium Shrouds are easy to
install, no tools required, and are
designed to fit 15 amp grinders. Inserts
are included to fit Blastrac®, Dewalt®,
Milwaukee®, Hitachi® and Metabo®
brand 7” hand grinders for superior
performance and dust control.
SHROUD KITSSHROUD KITS
PART NO. DESCRIPTION DIAMETER
DIA-05-65710 7” Premium Full Shroud 7”
DIA-05-65713 7” Premium Hinged Shroud 7”
SCRAPER BLADES & ACCESSORIES
CARPET BLADES PART NO. DESCRIPTION
P000553 8” Carpet Cutting & Removal Blade
CARPET SLITTING & REMOVAL BLADES
PART NO. DESCRIPTION
P000554 10” Carpet Cutting & Removal Blade
PART NO. DESCRIPTION
P000555 12” Carpet Cutting & Removal Blade
TILE BLADES PART NO. DESCRIPTION
P000859 6” Tile Blade with Bevel
TILE BLADES WITH BEVEL
PART NO. DESCRIPTION
P000854 8” Tile Blade with Bevel
PART NO. DESCRIPTION
P000886 10” Tile Blade with Bevel
PART NO. DESCRIPTION
P000855 12” Tile Blade with Bevel
Concrete cleaning, thin coating and glue
removal. Removal of VCT or ceramic
tiles. Removal of carpet or wood
flooring. Removal of mastic or heavy
adhesives.
CHISEL BLADES PART NO. DESCRIPTION
E09540 2” Premium Chisel Blade
PREMIUM CHISEL BLADES
PART NO. DESCRIPTION
E09542 6” Premium Chisel Blade
PART NO. DESCRIPTION
E09550 2” Heavy Duty Chisel Blade
PART NO. DESCRIPTION
E09542 6” Heavy Duty Chisel Blade
PART NO. DESCRIPTION
E09664 Tool Holder for Chisel Blades (required)
Designed for use on the BS-110 Scraper
or the BMS-220 ADB Ride on Scraper.
Aggressive production blades. For
removing coatings and material from
concrete.
GRINDING PLATES PART NO. SEGMENTS DIAMETER BOND
CG1010ASEG 10 - Arrow 10”
GRINDING PLATES
PART NO. SEGMENTS DIAMETER BOND
CG1020ASEG 20 - Arrow 10”
PART NO. SEGMENTS DIAMETER BOND
CG1010ASEGH 10 - Arrow 10” Hard
PART NO. SEGMENTS DIAMETER BOND
CG1020ASEGH 20 - Arrow 10” Hard
PART NO. SEGMENTS DIAMETER BOND
CG1010DBT 10 10” Medium
CG1020DBT 20 10” Medium
GRINDING PLATES & ULTRA CUT® BLADES
Diamatic® Ultra Cut® joint clean out
and preparation blade for epoxy and
polyrea removal. The Ultra Cut® blade is
a bi-directional blade featuring a patent
pending vacuum-braised side walls for
texturing joint side walls. The Ultra Cut®
blade is available in 7” and 10”.
ULTRA CUT® BLADES
PART NO. SIZE
CG-7BRZ-187 7” X .187 X 7/8
CG-7BRZ-250 7” X .250 X 7/8
CG-10BRZ-187 10” X .187 X 7/8
ULTRA CUT® BLADES
PLATES
This heavy duty quick change plate
works with all of your favorite Diamatic
grinding and polishing tools. Your
metals can be changed quickly and
efficiently to save you time on the job.
Use E10366 velcro holder to run resins,
hybrids, and transitionals.
SUPERMAG® PLATES
PART NO.
DIA-SUPERMAG-2
For Diamatic® Machines
SUPERMAG PLATES
DIAMAG® plates are designed to fit most
popular floor polishing and
grinding machines. Once attached,
DIAMAG® plates eliminate the need for
any tools to change or replace diamond
tooling. Simple hand and finger leverage
can remove the segments. This user
friendly and time-saving system helps
save unnecessary wear and tear on the
diamonds from possible tool damage.
Critical alignment pins and industrial
magnets insure the proper connection
of DIAMAG® diamonds to the plates.
DIAMAG® PLATES
PART NO.
DIA-SUPERMAG-SASEHTC
For SASE® & HTC® Machines
PART NO.
DIA-SUPERMAG-HSQ
For Husqvarna® Machines
PART NO.
E07155
DIAMAG® Adapter Plate BMG-435
PART NO.
E07185
DIAMAG® Adapter Plate BMG-535 / BMG-580
PART NO.
E07240-2
DIAMAG® Adapter Plate BMG-735 / BMG-780
SUPERMAG PLATES
PART NO.
E07270-3
DIAMAG® Universal Adapter Plate Sase® PDG8000 / HTC® 800 Series
PART NO.
E07225
DIAMAG® Adapter Plate Lavina®
OTHER QUICK RELEASE DIAMAG® PLATESPART NO. DESCRIPTION
E07230 DIAMAG® Adapter Plate HTC® 500 / HTC 650
E01366-2 DIAMAG® Resin Adapter Plate
PLATES
For use on first metal bond cuts. The
rigid head assembly is designed to cut
evenly to produce a floor with an
extremely flat profile. Limits vibration
when cutting thick materials off of
flooring and decks.
SCREW ON, RIGID & SEMI-RIGID PLATE SETUP
PART NO.
BG300212
Diamond Wing Adapter Plate for BMG-435
PART NO.
BG300213
Resin Diamond Adapter Plate for BMG-435
PART NO.
BG200994
Diamond Wing Adapter Plate for BMG-535 & BMG-580
PART NO.
PA-10950
Resin Diamond Adapter Plate for BMG-535 & BMG-580
PART NO.
BG200993-1
Diamond Wing Adapter Plate for BMG-735 and BMG-780
PART NO.
PA-10936
Resin Diamond Adapter Plate for BMG-535 & BMG-580
RIGID HEAD ASSEMBLYPART NO. DESCRIPTION
BG11880 Fork
BE0204/ BE0584 Bolt & Spring Washer
BG11879 Buffer Disc
BG240190-1 240MM Diamond Holder
BE0608 Retaining Ring
BE0030 Bolt
BE0314 Washer
SEMI-RIGID HEAD ASSEMBLYPART NO. DESCRIPTION
E10172-240 780/735 Machines
E10172-185 555 Machines
SCREW ON PLATES
WHERE TO BUY
Aramsco
Tom Duffy
Pantheon
Standfast Diamatic Locations
DIAMATIC USA5220 Gaines StreetSan Diego, CA 92110 Toll Free: 866-295-5512Tel: 619-295-0893Fax: 619-295-0754Email: [email protected]
www.diamaticusa.comwww.ultraflor.comwww.silexsystem.com
NORTHEAST FACILITY622 Grant RoadFolcroft, PA 19032 Toll Free: 866-295-5512Tel: 619-295-0893Fax: 619-295-0754Email: [email protected]
©2019 The Diamatic Logo is a registered trademark of Global Polishing Solutions, Inc.
diamaticusa.com | ultraflor.com | silexsystem.com