Compressed air solutions forcraftsmen and DIY enthusiasts
2003Valid from 1 April 2003
What market leadership means tous.For over three decades,Schneider Druckluft has been apioneer and market leader inthe sector of "DIY work withcompressed air" for innovativethinking and competency.Uppermost target and the mostimportant question: How canusers of compressed airsystems obtain ever betterwork results economically spe-aking. In other words: Ourcustomers are at the centre ofall our efforts. The R & Ddepartment at SchneiderDruckluft ensures permanentlythat the products meet thespecific and always changingmarket demands.
No matter whether you use ourcompressed air products inworkshops or at home: Weshall be pleased to help youwith your individual compres-sed air solution and to offeryou help and advice wherevernecessary.
We are there for you at home andabroad.We are also successful on aninternational scale. Our repre-sentatives in Europe are yourcompetent partners for all que-stions regarding compressedair. In Algeria, in theNetherlands, in Croatia,Austria, Romania, Russia, inSlovakia, in Slovenia, theCzech Republic and inHungary. We will be pleased tocontact you!
Schneider Druckluft -Your Competent Partnerfor DIY work with compressed air.
The "Swabian heart" of our company - our headquarters in Reutlingen
Obtain advice from our competent employees
Schneider Druckluft2
Our Quality GuaranteeAll Schneider Druckluft produc-ts are subject to strict qualityinspections.
Our Product Guarantee In accordance with legal requi-rements, all products intendedfor exclusively private use areprovided with a two-year gua-rantee against material andmanufacturing defects. Forproducts intended for commer-cial or professional use, thecorresponding warranty periodis 12 months.. Damage causedby improper use is excludedfrom this guarantee.
Our Anti-Rust GuaranteeFor tanks with a burnt-in 2-component inner coating, weprovide a 15-year guaranteeagainst rusting.
Our Advice GuaranteeCompetent and specialist advi-ce is natural for us.
Our Spare Parts Supply GuaranteeAll spare parts remain availablefor at least 10 years from thedate of purchase.
Our Innovation GuaranteeSchneider Druckluft stands forthe constant development ofnew technical devices andsolutions.
Your trust is well-founded: Our Guarantee Promise:
Schneider Druckluft 3
IntroductionOur guarantee PromiseTable of Contents4-phase models for compressed air
Mobile compressorsProfimaster oil-free compressors Profimaster compressorsSilent CompressorsCompact compressorsUniversal compressorsUniversal ST compressorsSuper compressorsSuper oil-free compressors
Fixed compressorsCraftsman compressorsUniversal compressorsAir-Master screw-type compressors
Compressed Air PreparationÖwaDry, Ecomat, DryerÖwatec, Filter
Piping SystemsConnector system 12-28 mm
Maintenance devicesCompact SeriesShop Floor Series
Compressed Air AccessoriesHosesHose rollersTractionsOverhead multiple sockets unitsScrew connections / Brass parts
Compressed Air ToolsImpact screwdriversRatchet screwdriversChisel hammersGrinding machinesMotor vehicle toolsSheet metal working toolsDrilling machinesScrewdriversRiveting devices, staplers and nailing devicesDIY Enthusiast series paint spray gunsCraftsman series paint spray gunsMaterial pressure vesselsSpecial devices for the material pressure vesselsBlowing gunsBlasting gunsCartridge gunsSpray gunsTyre pressure gaugesAir accumulatorsCleaning devicesDIY Enthusiast setsConsumable material
Index
Table of Contents
The contents of this
catalogue are accura-
te at the time of print
(07/ 03). Technical
details and equipment
variants may deviate
from the descriptions.
We therefore reserve
the right to change the
published data.
2356
81012141518202123
24262829
323334
3538
464749
Schneider Druckluft 5
535455565657
666871727679828385869496
100101104106107107108110111113113
114
Everything under one roof: Schneider Druckluft -the 4 stages of compressed air!
1. Stage:Generatingcompressed air
2. Stage:Preparing compressed air
3. Stage:Distributing compressed air
Optimise your use of compressed air!Compressed air is used optimally if it is correctly processed bet-ween the compressor and the compressed air tool. Dependingon the area of application, it may be processed in four differentstations. Schneider Druckluft offers you all the necessary com-ponents. You can rely on our competency.
Our compressors are speciali-sed in the most diverse areasof application and generatepressure of up to 15 bar.
Mobile compressors:! mobile compressors! portable compressors
Fixed compressors:! Piston compressors! Screw-type compressors
Devices for compressed airpreparation fulfil various func-tions. Maintenance devicesfrom the Compact andWorkshop Series work semi- orfully-automatically for trouble-free operation:
! Pressure reducer! Filter / water separator! Filter pressure reducer! Mist oiler
Further preparation devicesclean the compressed air andcollect the various substancesproduced:
! Filter! Compressed air dryer! Condensate trap! Oil / water separators
In addition to the usual hoses,the compressed air is also gui-ded over permanently installedpipe systems on its way to theusage site. Several workstations are thussupplied with compressed airat the same time.
! Pipe systems! Compressed air hoses! Couplings and screws
New:A TÜV (Technical InspectionAgency) certificate certifies theimpermeability of our pipesystems in accordance withthe pressure device guideline.Up to now, it has namedSchneider Druckluft as solemanufacturer.
Schneider Druckluft6
4. Stage: Using compressed airThe Craftsman Series itselfequips the most discerningcraftsmen with the optimalcompressed air tool. The DIYEnthusiast Series is designedfor smaller workshops and forDIY enthusiasts with professio-nal demands.
SecuringRiveting devices, staplersand nailing devices
Securing:Impact and ratchet screwdrivers,drilling machines
Decontamination:Chisel hammers and needle descalers
Cleansing, drying:Blowing guns
Hygiene:Pipe cleaning and maintenance guns,foam cleaning guns
Check air pressure:Filling and measuring devices
Surface technology,preparation:Grinding machines,sand blasting guns
Surface technology,surface coating:Spray guns, airbrush guns,material pressure vessels
Schneider Druckluft 7
Yellow or grey - for your orientation.
Schneider Druckluft mobilecompressors are available intwo different equipment andload-bearing capacity levels.The difference in colour - greyand yellow vessels - showsyou immediately which com-pressors fulfil your demandsoptimally.
Grey is the colour for particu-larly discerning DIY enthu-siasts. It indicates compres-sors of an extremely robustmodel with a guarantee of along life cycle for daily, rigo-rous work in the workshop.These devices fulfil the highestquality standard and offermass-produced high-qualityequipment.
New: We now provide a 15-year guarantee against corrosi-on for vessels with burnt-ininterior coating.
Yellow compressors are bestsuited to smaller workshopsand the DIY enthusiast withprofessional demands. Sincean irregular use results in lessstress, a simpler model withreduced equipment that actual-ly costs less is sufficient inmany cases.
On the following pages, youwill find the wide selection ofSchneider Druckluft mobilecompressors. We have classi-fied the various ranges intovarious areas of use - depen-ding on the user group. Thismakes easier your choice anddecision for the compressorthat best suits you.
Schneider Druckluft8
Depending on the area ofapplication or use, a compres-sor must meet the most diver-se demands. SchneiderDruckluft mobile compressorsoffer you the most various,application-specific specialtechnical facilities. Even for anidentical performance.
Super, Universal and Profimaster:Multi-purpose, powerful compres-sor types.The Super and Universal com-pressors are our most popularmobile devices for workshopuse. The Profimaster compres-sors are recommended forsmaller workshops and for DIYenthusiasts with professionaldemands.
Light, portable and robust:The Compact SeriesOur Compact compressors canbe optimally deployed on buil-ding sites and in interior furnis-hing. They are light, handy androbust.
Oil-free compressors:for maintenance-free operation.Attach particular value to main-tenance-free operation, youshould decide for an oil-freecompressor. Forget about oilchanges and oil in the conden-sate, and the environment willbe saved. The Racer: Handy,the extremely handy compres-sor!
If it should be quiet: Our Silentcompressors.Silent compressors provethemselves everywhere whereparticularly quiet operation isrequired - for example in inha-bited places and doctor's sur-geries
Being independent: Compressorswith petrol drive.Compressors with petrol driveoffer you independence - youcan therefore do without powerconnectors.
Schneider Druckluft mobile compressors -make you mobile.
Schneider Druckluft 9
More power as a result of the high-performance wobble piston!Quantity of compressed airincreased by up to 32% withthe use of high-performancewobble pistons. The workingpressure of 8 bar is thus rea-ched more quickly. The result:More force for easier work!
Life cycle multiplied ten-fold withPTFE materials on the piston.High-quality, hardwearingmaterials guarantee a long lifecycle (compared to traditional,oil-free compressors).
Virtually loss-free power transmis-sion with direct coupling of themotor and the compressor! The directly-coupled compres-sor saves the intermediate gearbox. Consequence: less wearand tear plus energy savingsthanks to a virtually loss-freepower transmission betweenthe motor and the compressor.
oil-free Profimaster.The oil-free operation saves maintenance - no oil changes, no oil in the condensate.
Schneider Druckluft10
The oil-free compressor savesmaintenance.No oil changes, no oil in thecondensed air and the conden-sate with the use of modern,oil-free compressor technology.It makes operation easier andrelieves the environment.
All-inclusive: Fittings unit withpressure reducer, quick couplingand two pressure reducers.The pressure reducer allowsthe desired working pressureto be set, the quick couplingmakes it easier to connect thecompressed air tools. The ves-sel and working pressures canbe read at the same time onboth of the pressure gauges.
A particular solution: the extremelyhandy and light Handy compressor!
There are also in the ProfimasterSeries:quiet SILENT, Type 100-6 and 200-6.
Schneider Druckluft 11
Compressors, mobile
Profimaster Compressors for smaller workshopsoil-free and for DIY enthusiasts with professional demands
Common features:¨ Single-cylinder piston compressor
¨ Oil-free operation saves maintenance. No oil changes, no oil in the condensate
¨ Air discharge with quick coupling for easy connection of compressed air devices
¨ Complete with all safety fittings and electrical connection cable with plug
Type Press- Suction Inflation Drive Voltage Rotary Vessel Dimensions Weight Noise Art. No.ure perform. perform. perform. speed quantity W x D x H dB(A)bar l/min. l/min. kW Volt min-1 l mm kg 1) 2)
Handy 8 160 70 1.1 230 2850 2 330x250x420 11 74 94 A 199 028
100-6 Silent 8 95 50 0.55 230 1420 6 380x210x430 14 67 87 A 220 062
200-6 Silent 8 200 110 1.1 230 2850 6 460x220x650 19 63 83 A 220 055
200-25 8 200 110 1.1 230 2850 24 590x290x600 20 74 94 A 199 018
1) EEC sound pressure level for a distance of 4m (L PA4 )2) Sound pressure level in accordance with EN ISO 3744 (Directive 2000/14/EC)
Oil-free Handy ● Portable, extremely handy and light● Fully-automatic operation with pressure switch and relief valve● Compressed air vessel equipped with a safety valve,
Vessel pressure gauge and condensate outlet valve● Pressure reducer for setting the working pressure
Oil-free Profimaster 100-6 Silent ● Portable● Fully-automatic operation with pressure switch and relief valve● Compressed air vessel equipped with a safety valve,
Vessel pressure gauge and condensate outlet valve● Pressure reducer for setting the working pressure● Quiet due to special casing for the power unit● Low speed of rotation● Extremely long life cycle compared to traditional, oil-free
compressors due to the high quality and hardwearingness of thematerials used
● Inflation performance improved by up to 32% thanks tohigh-performance wobble pistons
Oil-free Profimaster 200-6 Silent ● Portable and mobile● Compact, flat design - only requires little space● Fully-automatic operation with pressure switch and relief valve● Compressed air vessel equipped with a safety valve,
Vessel pressure gauge and condensate outlet valve● Pressure reducer for setting the working pressure● Integrated accessory compartment with 8 x 1 mm spiral hose,
Length: 4m and blowing gun● Quiet due to special casing for the power unit● Extremely long life cycle compared to traditional, oil-free
compressors due to the high quality and hardwearingness of thematerials used
● Inflation performance improved by up to 32% thanks tohigh-performance wobble pistons
Oil-free Profimaster 200-25 ● Mobile
● Fully-automatic operation via pressure switch with relief valve● Compressed air vessel equipped with a safety valve,
Vessel pressure gauge and condensate outlet valve● Fittings unit with pressure reducer and pressure gauge● Extremely long life cycle compared to traditional, oil-free
compressors due to the high quality and hardwearingness of thematerials used
● Filling performance improved by up to 32% thanks tohigh-performance wobble pistons
2-cylinder power unit with animproved performance.The 2-cylinder power unit withone-stage compression increa-ses the performance and thusensures a higher degree of effi-ciency.
Low speed of rotation for a longlife cycle.The compressor's low speed ofrotation reduces vibrations andexcessive wear-and-tear. Thisguarantees a long life cycle.
Quiet operation and optimal coo-ling.The V-belt drive over the largeventilator wheel guaranteesoptimal cooling for this traditio-nal design.
An aftercooler supplies cool, drycompressed air. The compressed air generatedis quickly cooled down. Thetools are saved due to earlycondensate elimination.
The Profimaster Series.Efficient and reliable.
Schneider Druckluft12
Fittings unit - completely equippedwith filter pressure reducer, quickcoupling and two pressure gauges.The filter pressure reducer ena-bles the setting of the desiredworking pressure and absorbsthe condensate produced. Thisreduces the wear-and-tear oncompressed air tools. Thequick coupling makes toolconnection easier. With twopressure gauges, you can readthe vessel and working pressu-res at the same time.
Stability-inclusive.Large, wide wheels and tworubber vacuum feet ensure asafe foothold and secure trans-port.
An additional quick couplingon the vessel supplies fullpressure.
Schneider Druckluft 13
Compressors, mobile
Profimaster Compressors for smaller workshopsand for DIY enthusiasts with professional demands
Common features:¨ Mobile piston compressors
¨ Completely equipped with all safety fittings and electrical connection cable with plug¨ Fully-automatic operation via pressure switch with start-up relief, motor protection and ON/OFF switch¨ Additional compressed air aftercooler. Therefore less humidity in the compressed air¨ Compressed air vessel equipped with a safety valve, a condensate outlet valve and a vessel pressure gauge¨ Air discharge with quick coupling for easy connection of compressed air devices
¨ Two pressure gauges for vessel pressure and working pressure
Type Press- Suction Inflation Drive Voltage Rotary Vessel Dimensions Weight Noise Art. No.ure perform. perform. perform. speed quantity W x D x H dB(A)bar l/min. l/min. kW Volt min-1 l mm kg 1) 2)
200-25 W 8 200 115 1.1 230 2850 24 600x255x580 21 72 92 A 200 705
250-50 W 10 240 155 1.5 230 2850 50 880x360x680 39 76 96 A 200 706
255-50 Silent 10 255 165 1.5 230 2800 50 1000x390x770 56 67 87 A 200 226
300-50 W 10 300 195 2.0 230 2850 50 940x435x650 40 78 98 A 200 707
460-50 W 10 390 285 2.2 230 1490 50 870x370x710 50 70 90 A 200 701
460-50 D 10 390 285 2.2 400 1490 50 870x370x710 47 70 90 A 200 702
660-50 D 10 500 410 3.0 400 1510 50 870x370x780 52 73 93 A 200 708
660-90 D 10 500 410 3.0 400 1510 90 1080x500x890 69 72 92 A 200 709
1) Sound pressure level for a distance of 4m (LPA4)2) Sound pressure level in accordance with EN ISO 3744 (Directive 2000/14/EC)
Profimaster 200-25 W ● Directly-flanged power unit● 1 cylinder● mobile● Fittings unit with pressure reducer
250-50 W ● Identical to the 200-25 W version, but with a more efficient powerunit and a larger vessel
300-50 W ● Identical to the 250-50 W version, but with a more efficient powerunit
● Fittings unit with filter pressure reducer for regulated compressedair as well as compressed air cleaned of condensate, dirt and oil
Profimaster 460-50 W ● V-belt driven● 2 cylinders● mobile● 2 rubber supports for a secure grip● Additional quick coupling on the vessel for full pressure● Fittings unit with filter pressure reducer for regulated compressed
air as well as for compressed air that is cleaned of condensate, dirtand oil
460-50 D ● Identical to the 460-50 W version, but as a three-phase currentmodel
660-50 D ● Identical to the 460-50 W version, but with a more efficient powerunit
● 2-stage compressing power unit660-90 D ● Identical to the 660-50 W version, but with a larger vessel
Profimaster 255-50 Silent ● Directly flanged power unit● 1 cylinder● Soundproofed power unit, with integrated electrical extractor fan● Fittings unit with filter pressure reducer for regulated compressed
air as well as for compressed air that is cleaned of condensate, dirtand oil
14 Schneider Druckluft
Type Press- Suction Inflation Drive Voltage Rotary Vessel Dimensions Weight Noise Art. No.ure perform. perform. perform. speed quantity W x D x Hbar l/min. l/min. kW Volt min-1 l mm kg dB(A)1)
Silent 30 8 30 17 0.2 230 2900 4 410x190x435 19 31 A 220 030
Silent 50 8 50 33 0.34 230 2900 9 360x360x430 21 33 A 220 015
Special oil for Silent compressors, Contents: 1l B 770 010
1) Sound pressure level for a distance of 4m in accordance with the EEC directive 79/113 EEC (L PA4 )
Silent 30
Silent 50 ●●●●● With pressure relief for unencumbered operation●●●●● With special head for lower operating temperatures and thus particularly low levels of oil residue in the compressed air.
Compressors
SilentCompressors Handy and quiet compressors
Common features:¨ Portable piston compressors¨ Fully-automatic operation via pressure switch¨ Air discharge with quick coupling for easy connection of compressed air devices¨ Fittings unit with filter pressure reducer for regulated compressed air as well as compressed air cleaned of condensate, dirt and oil¨ Pressure gauge for working pressure¨ Virtually silent operation. Therefore specially designed to be used directly at the workstation¨ Excellently suited to airbrush work
Handy products are requestedspecifically for use on buildingsites and for interior furnishing.The portable and mobile com-pressors available in SchneiderDruckluft's Compact Series arelight and mobile. And with thebest complete protectionagainst impacts and blows.
Complete protection for rough ever-yday life.A stable tubular frame and fit-tings protection secure all ofthe sensitive parts. The non-slip protection gives the com-pressor a firm grip, even forhorizontal transport in vehicles.
Starts up well in all cases - andthat is important.The directly flanged 1-cylinderpower unit has good start-upcharacteristics - even in theevent of a drop in voltage tounder 200 volts, and that doesnot happen often on buildingsites.
Compact - our mobile compressors for the building trade.
Schneider Druckluft 15
New: 15-year guarantee againstcorrosion!The vessel is zinc-phosphatedand plastic-coated. The burnt-in interior coating protectsagainst corrosion and ensuresa long life cycle. We now provi-de a 15-year guarantee againstcorrosion for vessels withburnt-in interior coating. Handson!
Complete fittings unit - with filterpressure reducer, mist oiler, 2 pres-sure gauges and 2 quick couplings. The filter pressure reducer ena-bles the setting of the desiredworking pressure and filters outthe condensate produced. Itreduces the wear-and-tear onthe compressed air tools. Thebuilt-in mist oiler supplies theconnected tools with thenecessary lubrication. Twoquick couplings offer you alter-natives: either un-oiled air forpainting work or oiled com-pressed air for tools with oillubrication. Two pressure gau-ges enable simultaneous rea-ding of the vessel and workingpressures.
Saves the flooring.Easily interchangeable rubberfoot that can be screwed-onprevent damage to high-qualityflooring.
16 Schneider Druckluft
Type Pres- Suction Inflation Drive Voltage Rotary Vessel Dimensions Weight Noise Art. No.sure perform. perform. perform. speed quantity W x D x H dB(A)bar l/min. l/min. kW Volt min-1 l mm kg 1) 2)
Compact / Compact Plus
100 Putty 15 85 49 0.55 230 1415 2.7 530x300x400 21 68 88 A 200 136
212 10 200 125 1.1 230 2850 2.7 530x300x400 18,5 73 93 A 200 237
200 oil-free 8 200 110 1.1 230 2800 12 430x350x660 21 72 92 A 220 000
250 Plus 10 240 155 1.5 230 2850 12 430x350x660 26 76 96 A 200 124
300 Plus 10 300 195 2.0 230 2850 20 480x430x790 33 76 96 A 200 127
342 Plus 10 340 265 2.2 230 1465 20 480x430x790 45 73 93 A 200 166
Compact Super
320 Super 10 310 240 1.9 230 1410 18 610x610x530 48 70 90 A 200 167
400 Super 10 390 300 2.2 230 1430 20 820x760x500 77 70 90 A 200 028
600 Super 10 560 450 3.0 400 1440 20 820x760x500 74 74 94 A 200 037
760 Super 8 760 580 4.0 400 1140 20 1300x760x740 99 74 94 A 200 059
Compact Petrol
240 Petrol 10 230 140 2.2 Petrol 3200 10 450x520x730 31 79 99 A 200 079
1) Sound pressure level for a distance of 4m (LPA4)2) Sound pressure level in accordance with EN ISO 3744 (Directive 2000/14/EC)
Compact 100 Putty ● 1-cylinder; directly-flanged power unit● Quiet due to low speed of rotation● Included in the delivery: 10 m compressed air hose (Super Flex,
very flexible), hose holder and cable holder● Pressure of up to 15 bar (specially for puttying)● An additional air discharge with quick coupling for full pressure
212 ● Identical to the 100 Putty version, but with improved suctionperformance and 10 bar pressure, but without the additionalcompressed air hose and holders
Compressors, mobile
CompactCompressors Compressors for the discerning craftsman.
Common features:¨ Piston compressor¨ Particularly for mobile use on building sites and in interior furnishing.¨ Completely equipped with all safety fittings and electrical connection cable with plug¨ Fully-automatic operation via pressure switch with start-up relief, motor protection and ON/OFF switch¨ Compressed air vessel equipped with safety valve, vessel pressure gauge and condensate outlet valve¨ Air discharges with quick coupling for easy connection of compressed air devices¨ All fragile parts, such as pressure switches, pressure gauges, fittings, etc. are well protected
Equipment features oil-free Plus Super Petrol
100 Kitt 200 250 300 320 760 240 B212 342 400
600
Pressure reducer ¨ ¨
Filter pressure reducer ¨ ¨ ¨ ¨ ¨
Mist oiler ¨ ¨ ¨
Air discharges 2/1 1 1 2 2 2 2
Fittings protection with non-slip security ¨ ¨
Portable ¨ ¨ ¨ ¨ ¨
Mobile ¨ ¨ ¨ ¨ ¨
Interior-coated vessel ¨ ¨ ¨
Zinc-phosphated and plastic-coated vessel ¨ ¨ ¨ ¨ ¨
Schneider Druckluft 17
Compressors, mobile
Compact 200 oil-free ¨ 1-cylinder; directly-flanged power unit¨ Can be transported either vertically or horizontally¨ With a life cycle up to ten times that of traditional, oil-free
compressors due to the high-quality and hardwearingness of thematerials used
¨ Oil-free operation saves maintenance. No oil changes, no oilin the condensate
¨ Filling performance improved by up to 32% thanks tohigh-performance wobble pistons
¨ Vessels with burnt-in interior coating.15 year vessel guarantee against corrosion
Compact 250 Plus ¨ 1-cylinder; directly-flanged power unit¨ Can be transported either vertically or horizontally¨ An air discharge for regulated compressed air as well as for
compressed air that is cleaned of condensate, dirt and oil¨ Vessels with burnt-in interior coating.
15 year vessel guarantee against corrosion.
300 Plus ¨ Identical to the 250 Plus version, but with a more efficient power unit,a larger vessel and with a mist oiler
¨ An air discharge for regulated compressed air as well as forcondensed air that is cleaned of condensate, dirt and oil, an airdischarge for oiled compressed air
342 Plus ¨ Identical to the 300 Plus version, but with a more efficient power unit¨ Low speed of rotation¨ Good operational characteristics
Compact 320 Super ¨ 2 cylinders, V layout, directly-flanged power unit.¨ An air discharge for regulated compressed air as well as for
compressed air that is cleaned of condensate, dirt and oil¨ Low speed of rotation¨ Stable steel frame with cover plate
400 Super ¨ Identical to the 320 Super version, but with a more efficientpower unit
600 Super ¨ Identical to the 400 Super version, but with a more efficientpower unit as a three-phase current model
Compact 760 Super ¨ 2 cylinders; two-stage compressing, V-belt driven power unit¨ An air discharge via pressure reducer and quick coupling, an air
discharge via claw coupling for full pressure¨ With polarity reversible 16A Cekon plug for changing the
direction of rotation¨ Setting of the neutral gear¨ Continuous operation up to 8 bar pressure, with time-delayed
automatic shut-off¨ Particularly suitable for painters and stucco plasterers for working
with plastering materials in association with a spiral pumpsupporting drive
Compact 240 Petrol ¨ 1 cylinder; directly-flanged power unit¨ Independent from the mains sector and powered by a petrol drive¨ An air discharge for regulated compressed air as well as for
compressed air that is cleaned of condensate, dirt and oil, an airdischarge for oiled compressed air
Quiet operation and optimal coolingThe cylinder layout and thelarge ventilator wheel take careof this.
An aftercooler supplies cool, drycompressed air. The compressed air generatedis quickly cooled down. Thetools are saved due to earlycondensate elimination.
New: 15-year guarantee againstcorrosion!The vessel is zinc-phosphatedand plastic-coated. The burnt-in interior coating protectsagainst corrosion and ensuresa long life cycle. We now provi-de a 15-year guarantee againstcorrosion for vessels withburnt-in interior coating.
Universal - our compressors in a traditional design.With a proven V-belt drive.
Schneider Druckluft18
Fittings unit - with filter pressurereducer, quick coupling and 2 pres-sure gauges. The filter pressure reducer ena-bles the setting of the desiredworking pressure and filters outthe condensate produced. Itreduces the wear-and-tear onthe compressed air tools. Thequick coupling facilitatesconnection of the compressedair tools. Two pressure gaugesenable simultaneously readingof the vessel and working pres-sures.
Higher degree of efficiency - with a2-cylinder power unit.The design with a 2-cylinderpower unit and two-stagecompression increases theperformance and ensures ahigher degree of efficiency.
Quiet operation, secure transport.with its large, air-filled tyres.
Compressors in a vertical design -easier to transport!Since our customers' spaceproportions are very different,we can also deliver some ofour Universal compressors in avertical design - they are indi-cated by the add-on "ST". Your advantage: they requireless place and are easier totransport.
Schneider Druckluft 19
Compressors, mobile
Universal Compressors for workshops.compressors The traditional solution with a proven V-belt drive.
Common features:¨ Mobile piston compressors¨ 2 cylinders, layout designed for particularly quiet operation¨ Vessel (zinc-phosphated and plastic-coated) with 2-component interior coating. 15 year guarantee against corrosion¨ V-belt drive with low speed of rotation¨ Large ventilator flywheel for optimal cooling¨ Additional compressed air aftercooler. Therefore less humidity in the compressed air¨ Completely equipped with all safety fittings and electrical connection cable with plug (400 V: Cekon plug with phase alternator)¨ Fully-automatic operation via pressure switch with start-up relief, motor protection and ON/OFF switch¨ Compressed air vessel equipped with safety valve, vessel pressure gauge and condensate outlet valve¨ Filter pressure reducer for regulated compressed air as well as compressed air that is cleaned of condensate, dirt and oil¨ Air discharge with quick coupling for easy connection of compressed air devices¨ 2 air-inflated tyres (except A 200 475) and 2 rubber supports for a secure foothold
Type Press- Suction Inflation Drive Voltage Rotary Vessel Dimensions Weight Noise Art. No.ure perform. perform. perform. speed quantity W x D x H dB(A)bar l/min. l/min. kW Volt min-1 l mm kg 1) 2)
400-50 W 10 390 285 2.2 230 1260 50 1040x450x810 65 71 91 A 200 450
400-50 D 10 390 285 2.2 400 1260 50 1040x450x810 62 71 91 A 200 455
500-50 D 10 500 390 3,0 400 1240 50 1040x450x810 66 75 95 A 200 458
500-90 D 10 500 390 3.0 400 1240 90 1120x480x890 83 73 93 A 200 460
650-90 D 10 615 500 4.0 400 1440 90 1120x480x960 99 76 96 A 200 472
500-15-50 D 15 500 400 4,0 400 1140 50 1040x450x880 92 73 93 A 200 473
500-15-90 D 15 500 400 4,0 400 1140 90 1120x480x960 109 73 93 A 200 474
500-15-50 B 15 500 400 6.6 Petrol 1140 50 1060x490x960 114 78 98 A 200 475
1) Sound pressure level for a distance of 4m (LPA4 )2) Sound pressure level in accordance with EN ISO 3744 (Directive 2000/14/EC)
Universal 400-50 W ¨ 2 cylinders, one-stage compression
400-50 D ¨ Identical to the 400-50 W version, but as a three-phasecurrent model
500-50 D ¨ Identical to the 400-50 D version, but with a more efficient power unit
500-90 D ¨ Identical to the 500-50 D version, but with a larger vessel
Universal 500-15-50 D ¨ Two-stage compressing power unit for pressures of up to 15 bar
¨ Three-phase current model
500-15-90 D ¨ Identical to the 500-15-50 D model, but with a larger vessel
650-90 D ¨ The mobile Universal compressor with the top-range power unitused in fixed craftsman compressors.
¨ 2 cylinders with two-stage compression provide an improved fillingperformance and ensure a high degree of efficiency.
Universal 500-15-50 B ¨ Independent from the mains sector and powered by a petrol drive
¨ Two-stage compressing power unit for pressures of up to 15 bar
¨ Setting of the neutral gear and the speed of rotation
20 Schneider Druckluft
Compressors, mobile Compressors, mobile
Universal ST Compressors for workshops.The traditional solution with a proven V-belt drive.
Common features:¨ Mobile piston compressors¨ Its particular advantage lies in its mobile use: The devices can easily be transported
by one person up or down stairs and the handling thereof is thus considerably betterthan that of compressors equipped with a horizontal vessel.
¨ Vessels (zinc-phosphated and plastic-coated) with 2-component interior coating. 15 year guarantee against corrosion¨ Completely equipped with all safety fittings and electrical connection cable with plug (400 V: Cekon plug with phase alternator)¨ Fully-automatic operation via pressure switch with start-up relief, motor protection and ON/OFF switch¨ Additional compressed air aftercooler. Therefore less humidity in the compressed air¨ Compressed air vessel equipped with safety valve, vessel pressure gauge and condensate outlet valve¨ Filter pressure reducer for regulated compressed air as well as compressed air that is cleaned of condensate, dirt and oil¨ An air discharge with quick coupling for easy connection of compressed air devices, a second air discharge for full pressure¨ Large, air-inflated tyres¨ Can be transported either vertically or horizontally¨ Mass-produced with integrated hose storage
Type Press- Suction Inflation Drive Voltage Rotary Vessel Dimensions Weight Noise Art. No.ure perform. perform. perform. speed quantity W x D x H dB(A)bar l/min. l/min. kW Volt min-1 l mm kg 1) 2)
460-50 W 10 390 285 2.2 230 1490 50 580x700x1290 67 70 90 A 200 176
460-50 D 10 390 285 2.2 400 1490 50 580x700x1290 64 70 90 A 200 177
660-50 D 10 500 390 3.0 400 1310 50 580x700x1290 74 73 93 A 200 1791) Sound pressure level for a distance of 4m (LPA4 )2) Sound pressure level in accordance with EN ISO 3744 (Directive 2000/14/EC)
Universal ST 460-50 W ¨ 2 cylinders, one-stage compression
¨ Layout designed for particularly quiet operation
460-50 D ¨ Identical to the 460-50 W version, but as a three-phasecurrent model
660-50 D ¨ Identical to the 460-50 W version, but with a more efficient power unit
Mass-producedwith integratedhose storage(The hose shownis not included inthe delivery).
Higher degree of efficiency, highfilling performance.This lavish design - 2-cylinderV power unit with one-stagecompression - increases thedegree of efficiency and fillingperformance.
Robust and secure.The low speed of rotationsaves the compressor's com-ponent parts. The result: asecure working method and alonger life cycle. There are noperformance losses betweenthe motor and the compressorpower unit caused by thedirect coupling.
Aftercooling saves the tools.The aftercooler cools down thecompressed air quickly. Thecondensate is therefore elimi-nated early and the connectedtools are saved.
New: 15-year guarantee againstcorrosion!The vessel is zinc-phosphatedand plastic-coated. The burnt-in interior coating protectsagainst corrosion and ensuresa long life cycle. We now provi-de a 15-year guarantee againstcorrosion for vessels withburnt-in interior coating.
Our Super compressors in a modern design.Direct drive, less maintenance.
Schneider Druckluft 21
Complete fittings unit - with filterpressure reducer, mist oiler, 2 pres-sure gauges and 2 quick couplings. The filter pressure reducer ena-bles the setting of the desiredworking pressure and filters outthe condensate produced. Itreduces the wear-and-tear onthe compressed air tools. Thebuilt-in mist oiler supplies theconnected tools with thenecessary lubrication. Twoquick couplings offer you alter-natives: either un-oiled air forpainting work or oiled com-pressed air for tools with oillubrication. Two pressure gau-ges enable simultaneous rea-ding of the vessel and workingpressures.
22 Schneider Druckluft
Compressors, mobile
Super compressors Mobile compressors for the discerning craftsman.Outstanding performance, quality, life cycle and equipment.
Common features:¨ Mobile piston compressors¨ Vibration-poor operation due to a low speed of rotation¨ Vessel (zinc-phosphated and plastic-coated) with 2-component interior coating. 15 year guarantee against corrosion¨ Directly-flanged power unit¨ Large ventilator flywheel for optimal cooling¨ Additional compressed air aftercooler. Therefore less humidity in the compressed air¨ Completely equipped with all safety fittings and electrical connection cable with plug (400 V Cekon plug with phase alternator)¨ Fully-automatic operation with special start-up relief, motor protection and ON/OFF switch¨ Compressed air vessel equipped with safety valve, vessel pressure gauge and condensate outlet valve¨ Fittings unit with filter pressure reducer for regulated compressed air as well as compressed air cleaned of condensate, dirt and oil and mist oiler
for oiled compressed air¨ Air discharges with quick coupling for easy connection of compressed air devices¨ Two pressure gauges for vessel pressure and working pressure
Type Press- Suction Inflation Drive Voltage Rotary Vessel Dimensions Weight Noise Art. No.ure perform. perform. perform. quantity W x D x H dB(A)bar l/min. l/min. kW Volt min-1 l mm kg 1) 2)
320-60 W 10 310 240 1.9 230 1410 60 970x480x710 58 70 90 A 200 087
320-60 Silent 10 310 240 1.9 230 1410 60 970x480x770 90 65 85 A 200 097
400-60 W 10 390 300 2.2 230 1430 60 980x480x780 75 71 91 A 200 090
400-60 D 10 390 300 2.2 400 1430 60 980x480x780 75 71 91 A 200 091
600-60 D 10 560 450 3.0 400 1440 60 980x480x780 72 74 94 A 200 095
600-90 D 10 560 450 3.0 400 1440 90 1110x480x890 82 78 98 A 200 107
1) Sound pressure level for a distance of 4m (LPA4)2) Sound pressure level in accordance with EN ISO 3744 (Directive 2000/14/EC)
Super Compressor 320-60 W ¨ 2 cylinders, V-layout
Super Compressor 400-60 W ¨ 2 cylinders, V-layout
400-60 D ¨ Identical to the 400-60 W version, but as a three-phasecurrent model
600-60 D ¨ Identical to the 400-60 D version, but with a more efficient power unit
600-90 D ¨ Identical to the 600-60 D version, but with a larger vessel
Super Compressor 320-60 Silent ¨ Identical to the 320-60 W version, but with sound absorption hood,extremely quiet
¨ With integrated electric extractor fan
Schneider Druckluft 23
Compressors
Super compressors Mobile compressors for the discerning craftsman.oil-free Outstanding performance, quality, life cycle and equipment.
Common features:¨ High-quality oil-free power units with PTFE-coated pistons. No oil changes, no oil in the condensate.¨ Quiet operation and long life cycle due to the low speed of rotation¨ Vessels with branded interior coating. 15 year vessel guarantee against corrosion¨ Additional compressed air aftercooler. Therefore less humidity in the compressed air¨ Fully-automatic operation with special start-up relief, motor protection and ON/OFF switch¨ Compressed air vessel equipped with a safety valve, a vessel pressure gauge and a condensate outlet valve¨ Completely equipped with all safety fittings and an electrical connection cable with plug (400 V: Cekon plug with phase alternator)
Type Press- Suction Inflation Drive Voltage Rotary Vessel Dimensions Weight Noise Art. No.ure perform. perform. perform. speed quantity W x D x H dB(A)bar l/min. l/min. kW Volt min-1 l mm kg
300-60 8 300 205 1.8 230 1420 60 980x480x750 56 71 1) 91 2) A 210 060
600-90 8 2 x 300 2 x 190 4) 2 x 1.8 400 1420 90 1170x450x880 90 78 3) A 210 080
1) Sound pressure level for a distance of 4m (LPA4)2) Sound pressure level in accordance with EN ISO 3744 (Directive 2000/14/EC)3) Sound pressure level for a distance of 1m in accordance with DIN 45653 T134) Actual quantity delivered measured at 6 bar in accordance with ISO 1217
Super Compressor 300-60 oil-free ¨ Mobile¨ 2 cylinders, one-stage compressing¨ Alternating current model¨ Fittings unit with filter pressure reducer and quick coupling
Super Compressor 600-90 oil-free ¨ Fixed¨ 2 power units each with 2 cylinders, one-stage compressing¨ The power units can be switched off individually¨ Three-phase current model¨ 1/2" ball valve at the vessel outlet¨ Rubber oscillating elements
Fixed compressors are perma-nently installed as EnergyCentres within a compressedair system. The usage sites arethus extremely diverse. Theystretch from industry works-hops via painting to the auto-mobile industry and further onto dental surgeries. We offerpermanently new, practice-ori-ented solutions for the con-stantly growing number oftasks faced by our customers.
Piston or screw-type compressors?If you have no permanent com-pressed air requirement duringthe day, we recommend youone of our piston compressors.Unlike piston compressors,screw-type compressors areendurers. Their strengths lie incontinual use. Besides, bothsystems can also be combinedextremely well. Screw-typecompressors cover the basicrequirement in compressed air,piston compressors hookthemselves up automaticallyfor your needs at the besttimes.
Fixed compressors.Power made by Schneider Druckluft.
Schneider Druckluft24
The Schneider Druckluft expertadvisor will be pleased to showyou on-site the most economi-cal solution for your specificcompressed air situation. Youcan contact him on the servicenumber indicated on the backpage of this catalogue. Onecall is enough!
Silent - soundproofed modelsWith our SILENT range sound-proofed compressors, you willobtain even more quality at theworkstation. They are presen-ted extensively in our catalo-gue for industry and trade.Please just ask!
Vertical versions.Space-saving - with vertical vessel.
Common features in brief:! V-belt driven piston
compressors with 2 cylinders for a pressure of 10, 12 and 15 bar.
! Two-stage compressingin-line power unit
! New: 15-year guaranteeagainst corrosion for vessels with burnt-in interiorcoating.
! Completely equipped withall fittings
! Vibration-poor operationthanks to a low speed of rotation
! Large ventilator flywheel foroptimal cooling
Vertical version -with cold-dryer in the piggyback.
Common features in brief:! Installation wired ready for
connection, therefore noinstallation costs. Technology identical to thatused in Craftsman compressors.
! Why both a cold-dryer anda bypass line? Dry compressed air preventsfaults in pneumaticcontrols, increases the lifecycle of compressed air tools and increases the quality at the workstation.
Craftsman compressors and the Universal range.With vertical or horizontal vessel.Proven in practice thousands of times over.
Schneider Druckluft 25
Complete compressed air system -the solution for less than 1 squaremetre.
Common features in brief:! With this system, you can
generate and process compressed air in the smallest space.
! Technology identical to thatused in Craftsman compressors - everything isalready installed ready foruse.
! The ÖwaDry preparationsystem. It includes compressed air and colddrying, filtration and acondensate collection installation with oil/waterseparation. The device thusfulfils all preconditions for the use of high-quality compressed air and condensate preparation.
Universal compressors - the tradi-tional, horizontal solution.
Common features:! Piston compressor for 10
or 15 bar pressure! New: 15-year guarantee
against corrosion for specially-coated vessels(interior and exterior).
! Completely equipped with all fittings
! Vibration-poor operationthanks to a low speed of rotation
! Large ventilator flywheel for optimal cooling
Universal compressors with tandemvessel - immediately TÜV (TechnicalInspection Agency)-free!
Common features:! extremely compact design -
can be accommodated onthe small base of a Standard pallet
! TÜV (Technical Inspection Agency)-free! as a result of the prototype test (in accor-dance with § 17 of the Industrial Safety Ordinance).No assembly test, no recurring tests by the TÜV (Technical InspectionAgency) necessary. Testingby qualified personnel(experts) sufficient.
! Transport and assembly areconsiderably simplified bymounting the devices onthe pallet.
! Further advantages - see the other Craftsman compressors on this page!
26 Schneider Druckluft
Compressors, fixed
Craftsmancompressors The space-saving solution with a vertical vessel
Common features:¨ V-belt driven piston compressors with 2 cylinders
for a pressure of 10, 12 and 15 bar.¨ Two-stage compressing in-line power unit.¨ Vessel with burnt-in interior coating. 15 year
guarantee against corrosion.¨ Completely equipped with all fittings, such as
electromagnetic valves or pressure switcheswith relief valve for fully-automatic operation,motor protection, safety valves, pressuregauges, reaction valves, condensate outletvalves and ball valves.
¨ 400V three-phase current motor¨ Vibration-poor operation due to the low speed of
rotation
¨ Large ventilator flywheel for optimal cooling¨ Mass-produced with rubber oscillating
elements¨ For all compressors and power units from
5.5 kW, start-up is obligatorily via an automaticstar/triangular switch. This is not included in thedelivery; but the delivery does include the start-up relief. For compressors with a 4 KW motor,the regulations regarding the local energyworks should be adhered to.
Type Press- Suction act. Deliv. Drive Rotary Vessel Dimensions Weight Noise Air dis- Art. No.ure perform. quantity perform. speed quantity W x D x H chargebar l/min. l/min.3) kW min-1 l mm kg dB(A)1)
10 bar
460-200 ST-A2) 10 460 375 3.0 1410 200 850x830x1760 134 80 3/4"i H 110 560
460-200 ST 10 460 375 3.0 1410 200 850x830x1760 135 80 3/4"i H 110 561
650-270 ST-A2) 10 650 520 4.0 950 270 850x830x1800 159 83 3/4"i H 110 565
650-270 ST 10 650 520 4.0 950 270 850x830x1800 160 83 2 x 3/4"i H 110 566
850-270 ST 10 850 680 5.5 1240 270 850x830x1800 170 83 2 x 3/4"i H 781 029
12 bar
430-12-300 ST 12 430 350 3.0 1340 300 850x830x1870 164 80 2 x 3/4"i H 110 075
610-12-300 ST-A2) 12 610 490 4.0 900 300 850x830x1905 189 83 2 x 3/4"i H 110 076
610-12-300 ST 12 610 490 4.0 900 300 850x830x1905 190 83 2 x 3/4"i H 110 077
15 bar
400-15-300 ST 15 400 340 3.0 1200 300 850x830x1870 164 80 2 x 3/4"i H 110 572
575-15-300 ST-A2) 15 575 460 4.0 850 300 850x830x1905 189 83 3/4"i H 110 573
575-15-300 ST 15 575 460 4.0 850 300 850x830x1905 190 83 2 x 3/4"i H 110 574
1) Sound pressure level for a distance of 1m in accordance with DIN 45653 T132) Custom-built model: Vessel without interior coating, 1 air dispatch, no holding clamp for dryer, no hand hole3) for 10 bar installations measured at 8 bar, for 12 bar installations measured at 10 bar and for 15 bar units measured at 12 bar in accordance with ISO 1217
Connection hoses¨ Elastic model¨ Can be used for pressures of up to 16 bar¨ With 2 screws with external threads
can be used for Length Type Art. No. Price Emm A) B)
Pipes 1300 VS 1/2" B 111 075 27.80 32.25
Vessel(270 and 300 l) 1300 VS 3/4" B 111 076 34.00 39.44
Rubber oscillating elements¨ For SD vessels¨ provide a secure foothold¨ Prevent the propagation of vibrations
for vessels Ø Package Type Art. No. Price Emm A) B)
90 l when horizontal 40 4 GSE 40 B 110 059 11.30 13.11
270, 300, 500 lhorizontal 70 4 GSE 70 B 110 060 24.20 28.07
270, 300, 500, 750,1000 l when vertical 100 3 GSE 100 B 110 063 38.60 44.78
Schneider Druckluft 27
Compressors, fixed
Craftsmancompressors „Piggyback“ with cold dryer
Common features:Installation wired ready for connection, therefore noinstallation costs, technical description as forcraftsman compressors (see page 26), butadditionally with:● Cold-dryer and bypass line
Dry compressed air prevents faults inpneumatic controls, increases the life cycle ofcompressed air tools and increases the qualityof work, e.g. while lacquering. High energy costsavings resulting from the cold dryer’s auto-matic shut-down in the part load area. WithFCKW-free refrigerant.
Compressed aircomplete systems The problem solution for less than 1m ²
With the complete compressed air system, you cangenerate and process compressed area in thesmallest space. Everything is installed ready foruse and can be accommodated in less than 1m².
Common features:Technical description as for craftsman compres-sors (see Page 26), but additionally with:ÖwaDry 710 F/1010 FThe ÖwaDry processing system includes com-pressed air cold-drying, a filtration system and acondensate collection facility with oil/water separa-tion. The device thus fulfils all pre-requisites for theuse of high-quality compressed air and for conden-sate processing in accordance with § 7a of theGerman Water Resources Act.The cold drying contributes to a reduction in costswith automatic energy-saving and with FCKW-freerefrigerant. It retrieves the annoying condensatefrom the compressed air and thus prevents faults
in pneumatic controls and increases the quality ofthe work (e. g. while lacquering) and ensures a longlife cycle for the compressed air tools. Thefiltration system consists of a micro filter. Themicro filter liberates the compressed air fromparticles of up to 0.01 µm. The condensatecollection facility pools the condensate producedin the vessel, the cold dryer and the filter andpasses it on for processing. The integrated oil/water separator ensures fully-automatic separationof the dirty and oily compressed air condensate. Asa result, up to 99% of the separated condensate canbe collected as normal waste water. Only about1% remains as residual dirt and oil for wastedisposal. This results in enormous cost savings.
Type Press- Suction act. Deliv. Drive Rotary Vessel Dimensions Weight Noise Air dis- Art. No.ure perform. quantity perform. speed quant. W x D x H chargebar l/min. l/min.2) kW min-1 l mm kg dB(A)1)
10 bar
650-270 ST - DK 600 10 650 520 4,0 950 270 830x1070x1800 195 83 2 x ¾“i H 110 567
850-270 ST-DK 600 10 850 680 5,5 1240 270 830x1070x1800 201 83 2 x ¾”i H 781 031
15 bar
575-15-300 ST-DK 600 15 575 460 4,0 850 300 830x1070x1910 221 83 2 x ¾”i H 110 575
Type Press- Suction act. Deliv. Drive Rotary Vessel Dimensions Weight Noise Air dis- Art. No.ure perform. quantity perform. speed quant. W x D x H chargebar l/min. l/min.2) kW min-1 l mm kg dB(A)1)
10 bar
DKS 650-270 ST 10 650 520 4,0 950 270 830x1200x1910 235 80 2 x ¾”i H 110 568
DKS 850-270 ST 10 850 680 5,5 1240 270 830x1200x1910 241 83 2 x ¾”i H 781 032
15 bar
DKS 575-15-300 ST 15 575 460 4.0 850 300 830x1200x1800 261 83 2 x ¾”i H 110 576
1) Sound pressure level for a distance of 1m in accordance with DIN 45653 T132) for 10 bar installations measured at 8 bar and for 15 bar installations measured at 12 bar in accordance with ISO 1217
28 Schneider Druckluft
Compressors, fixed
Universal The traditional solution with a horizontal vessel -compressors guaranteed for thousands of uses
Common features:● Piston compressor for 10 or 15 bar pressure● All vessels of up to 500l with special interior and exterior coating.
15 year guarantee against corrosion● Completely equipped with all fittings, such as electromagnetic
valves or pressure switches with relief valve for fully-automaticoperation, motor protection, safety valves, pressure gauges,reaction valves, condensate outlet valves and ball valves.
● 400V three-phase current motor● Vibration-poor operation thanks to a low speed of rotation● Large ventilator flywheel for optimal cooling● Mass-produced with rubber oscillating elements● 2-cylinder power unit with two-stage compression increases the
performance and ensures a high degree of efficiency.
Tandem container:● TÜV (Technical Inspection Agency)-free as a result of the prototype
test in accordance with § 17 of the Industrial Safety Ordinance. Noassembly test and no recurring tests carried out by the TÜV (TechnicalInspection Agency) are necessary. Testing by qualified personnel(experts) is sufficient.
● Space-saving with its extremely compact design on the small base of aStandard pallet
● Transport and assembly are considerably simplified by mounting thedevices on the pallet.
Type Press- Suction Act. deliv. Drive Rotary Vessel Dimensions Weight Noise Air dis- Art. No.ure perform. quantity perform. speed quant. W x D x H chargebar l/min. l/min.2) kW min-1 l mm kg dB(A)1)
qw
10 bar q
385-90 D 10 385 260 2.2 1260 90 1130x380x870 78 81 1/2"i H 200 080
460-90 D 10 460 375 3.0 1410 90 1130x350x870 75 80 3/4"i H 200 082
460-270 D 10 460 375 3.0 1410 270 1650x530x1110 155 83 3/4"i H 200 083
650-270 D 10 650 520 4.0 950 270 1650x530x1130 165 83 3/4"i H 110 579
650-500 D 10 650 520 4.0 950 500 2000x670x1200 210 83 1" i H 110 584
15 bar q
400-15-300 D 15 400 340 3.0 1200 300 1370x620x1230 180 81 3/4"i H 110 577
575-15-300 D 15 575 460 4.0 850 300 1370x620x1230 191 83 3/4"i H 110 578
Tandem container w
460-180 D 10 460 375 3.0 1410 2x90 1200x800x1210 170 80 3/4"i H 110 562
650-180 D 10 650 520 4.0 950 2x90 1200x800x1240 175 83 3/4"i H 110 569
1) Sound pressure level for a distance of 1m in accordance with DIN 45653 T132) for 10 bar installations measured at 8 bar, for 15 bar installations measured at 12 bar in accordance with ISO 1217
● Wired ready for connection in the lockable wallmounted cabinet
● With motor protection, control transformer,magnetic valve control, operation hours meter,2 m compressor connection cable
● Protection class IP54
● For compressors with 4kW drive power andstar/triangle switch, automatic start-up relief isadditionally necessary, from 5.5 kW it alsointegrated into the compressor.
star/triangle switch for compressors from 4 kW (in accordance with DIN EN 60204)
Type Compr. Art. No. Price EkW A) B)
SDS 4 4 B 111 149 676.00 784.16
SDS 5,5 5.5 B 111 150 676.00 784.16
Type Compr. Art. No. Price EkW A) B)
AE 4 4 B 111 055 107.00 124.12
Screw-type compressors, vesselsand cold dryers - a modularsystem.
Common features in brief:! Laid out for 100% utilizati-
on. An electronic monitoringfunction prevents motoroverloading, reduces wear-and-tear and increases thelife cycle.
! Compact dimensions andlow weight make transportand assembly really mucheasier.
! A clear operator panel pro-vides a complete overviewand good access.
! Mass-produced withstar/triangle switch
! 24 month guarantee for thecompressor block of thescrew-type compressor.
! New: 15-year guaranteeagainst corrosion for com-pressors with a two-compo-nent interior coating (onlyfor versions with vessel).
! The already installed com-pressed air dryer retrievesthe irritating condensatefrom the compressed air(only for variants with vesseland cold dryer).
Screw-type compressors in the Air-Master Series.Our endurers.
Schneider Druckluft 29
The space-saving variants - withtandem vessel.
Common features in brief:! TÜV (Technical Inspection
Agency)-free! as a result ofthe prototype test (in accor-dance with § 17 of theIndustrial Safety Ordinance).No assembly test, no recur-ring tests by the TÜV(Technical InspectionAgency) necessary. Testingby qualified personnel(experts) sufficient.
! Extremely compact designon the small base of aStandard pallet.
! New: 15-year guaranteeagainst corrosion - for ves-sels with burnt-in interiorcoating.
! The compact installationoffers optimal compressedair supply, even for constantair consumption.
! Generously dimensionedcooling system for regula-ting the operating tempera-ture.
30 Schneider Druckluft
Type Press- Volume Drive Rotary Vessel Dimensions Weight Noise Air dis- Art. No.ure current perform. speed quant. W x D x H chargebar l/min.2) kW min-1 l mm kg dB(A)1)
AMD 4-10 F1-270 10 435 4.0 1450 270 1300x650x1440 191 63 3/4” H 415 441
AMD 5-10 F1-270 10 610 5.5 2900 270 1300x650x1440 194 69 3/4” H 415 541
AMD 7-10 F1-270 10 930 7.5 2900 270 1300x650x1440 197 70 3/4” H 415 641
Compressorson the vessel
Compressors, fixed
Air Master The modular system,compressors consisting of a screw-type compressor, a vessel and a cold dryer
Individualcompressors
1) Sound pressure level for a distance of 1m in accordance with DIN 45635 T 132) max. volume currents for working pressures in accordance with ISO 1217 (Working pressure = Indicated pressure - 1 bar)
Type Press- Volume Drive Rotary Vessel Dimensions Weight Noise Air dis- Art. No.ure current perform. speed quant. W x D x H chargebar l/min.2) kW min-1 l mm kg dB(A)1)
AMD 4-10 F1 10 435 4.0 1450 – 640x570x750 96 63 1/2” H 415 440
AMD 5-10 F1 10 610 5.5 2900 – 640x570x750 99 69 1/2” H 415 540
AMD 7-10 F1 10 930 7.5 2900 – 640x570x750 102 70 1/2” H 415 640
● Laid out for 100% utilization. An electronicmonitoring function prevents motoroverloading, reduces wear-and-tear andincreases the life cycle.
● Compact dimensions and low weight maketransport and assembly really mucheasier.
● A clear operator panel provides a completeoverview and good access.
● New: 15-year guarantee against corrosionfor compressors with a two-componentinterior coating.
Schneider Druckluft 31
Compressors, fixed
Air Master The modular systemCompressors consisting of a screw-type compressor, a vessel and a cold dryer
Compressorswith cold dryeron the vessel
Type Pressure Volume Drive Rotary Vessel Dimensions Weight Noise Air dis- Art. No.current perform. speed quant. W x D x H charge
bar l/min.2) kW min-1 l mm kg dB(A)1)
AMD 4-10 F1-270 + DK 10 435 4.0 1450 270 1310x650x1440 217 63 3/4” H 415,443
AMD 5-10 F1-270 + DK 10 610 5,5 2900 270 1310x650x1440 220 69 3/4” H 415,543
AMD 7-10 F1-270 + DK 10 930 7,5 2900 270 1310x650x1440 223 70 3/4” H 415,643
Compressors on thetandem containerwith and withoutCold-dryer
Type Pressure Volume Drive Rotary Vessel Dimensions Weight Noise Air dis- Art. No.current perform. speed quant. W x D x H charge
bar l/min.2) kW min-1 l mm kg dB(A)1)
AMD 4-10 F1-180 10 435 4.0 1450 2x90 1200x800x1480 226 63 3/4” H 415,450
AMD 4-10 F1-180 + DK 10 435 4.0 1450 2x90 1200x800x1480 253 63 3/4” H 415,451
AMD 5-10 F1-180 10 610 5.5 2900 2x90 1200x800x1480 229 69 3/4” H 415,550
AMD 5-10 F1-180 + DK 10 610 5.5 2900 2x90 1200x800x1480 256 69 3/4” H 415,551
AMD 7-10 F1-180 10 930 7.5 2900 2x90 1200x800x1480 232 70 3/4” H 415,650
AMD 7-10 F1-180 + DK 10 930 7.5 2900 2x90 1200x800x1480 259 70 3/4” H 415,651
1) Sound pressure level for a distance of 1m in accordance with DIN 45653 T132) max. volume currents for working pressures in accordance with ISO 1217 (Working pressure = Indicated pressure - 1 bar)
● Mass-produced with cold-dryer.
Dry compressed air prevents faults inpneumatic controls, increases the lifecycle of compressed air tools andincreases the quality of work, e.g. whilelacquering. High energy cost savingsresulting from the cold dryer’s auto-maticshut-down in the part load area. WithFCKW-free refrigerant.
● TÜV (Technical Inspection Agency)-free!as a result of the prototype test (inaccordance with § 17 of the IndustrialSafety Ordinance).No assembly test, no recurring tests bythe TÜV (Technical Inspection Agency)necessary. Testing by qualified personnel(experts) sufficient.
Before high-quality compres-sed air is made available at theworkstation, it must first beprepared to perfection. Thislengthens not only the lifecycle of the compressed airtools and saves expensivemaintenance costs but alsosaves the health of youremployees and the environ-ment. Schneider Druckluftoffers you a complete range ofeffective and performant devi-ces for compressed air prepa-ration. Depending on the desi-red result, you can integratethese devices individually or asa combination into your com-pressed air system.
Filters are used to preventimpurities from entering thecompressed air. Compressedair cold dryers supply dry air.Both contribute considerablyto improving the air quality - aconsiderable factor, for exam-ple for painting work.
Compressed air preparation - almost as important as the supply.
Schneider Druckluft32
Condensate drains automati-cally drain oil-bearing and dirtycondensate. They are easy toinstall as well as hard-wearingand maintenance-free. In addi-tion, they monitor their ownwork - faults are indicatedimmediately.
Oil/water separators separateand clean the oil-bearing, diffi-cultly biodegradable compres-sed air condensate automati-cally and in an environmentallysuitable way. Afterwards, up to99% can be drained into thesewage water system. Thelegal conditions are thereforecompletely fulfilled.
Schneider Druckluft 33
Compressed air preparation
Preparation systemÖwaDry
Common features:● For preparation high-quality compressed air
and for condensate preparation in accordancewith § 7a of the German Water Resources Act.
● For upgrading and retrofitting fixed compressorunits
● Consisting of compressed air cold-drying,filtration, condensate collection and separation
● All components accommodated compactly in acasing and connected to each other ready foruse
● Wall-hanging assembly or as a floor-mountedappliance
● 230 V / 50 Hz electrical connection● Additional input on the oil/water separator for
the condensate discharge from thecompressor unit
● 1/2" i air connections● Dimensions: 430 x 400 x 870 mm (WxDxH)● F type only with micro-filter for discharging
particles of up to 0.01 pmVF type with additional prefilter. Particularly forolder installations for which a higher level of dirtshould be expected in the compressed air.Increases the service life of the micro-filter
Condensate dis-charger Ecomat
● Automatic discharge of oil-bearing and dirtycondensate
● For operating pressures of up to 16 bar● Wear-resistant and maintenance-free thanks to
electronic level recording● The condensate discharge prevents forming of
emulsion.
● No compressed air losses● Wired ready for connection with a 2.5m
connection cable and plug● 230 V / 50 Hz electrical connection● With a potential-free alarm contact
Type Compressor Weight Air- Art. No.
l/min. max. kg connection
Ecomat 3000 4200 0.83 G 1/2”i D 605 022
● Drying
● Filtration
● Condensate collection
● Condensate preparation
Type Micro-filter Prefilter Volume current Weight Art. No.
to l/min kg
710 F ● 700 40 H 605 071
710 VF ● ● 700 42 H 605 072
1010 F ● 1000 41 H 605 101
1010 VF ● ● 1000 43 H 605 102
G 3/4”i x G 1/2”a bypass line B 110 166
Common features:● Long life cycle for compressed air tools,
pneumatic controls etc. thanks to fullyautomatically dried compressed air
● Compact casing for hanging assembly● Cooling module from 100% stainless steel
- extremely efficient cooling- absolutely rust-free- lasting smooth surfaces provide an even flow profile
● No preliminary filter required
● The deflection-free vertical air duct with a drop-forming profile is guaranteed self-cleaning
● The LowSpeed separator is located at thedeepest position and thus uses gravity.Effectiveness: almost 100%
● ESU Energy-Saver Unit:with flexile dewpoint and shutdown when partlyloaded
● 230 V / 50 Hz electrical connection
Cold-dryer
Type Volume current1) Power Bypass Dimensions Weight Connection Art. No.at the pressure dew point consumption2) line W x D x H Air-
+3°C in l/min. kW Art. No. mm kg discharge
DK 200 PT 2) 200 0,12 B 110 172 325x263x740 22 R 3/4"i H 607 020
DK 400 PT 2) 400 0,12 B 110 172 325x263x740 23 R 3/4"i H 607 040
DK 600 PT 2) 600 0,15 B 110 172 325x263x740 24 R 3/4"i H 607 060
DK 800 PT 3) 800 0,17 B 110 172 325x263x740 25 R 3/4"i H 607 080
DK 1000 PT 3) 1.000 0,23 B 110 172 325x263x740 26 R 3/4"i H 607 100
Bypass line (3/4" i x 1/2" a connection) B 110 172
1) Air volume current in accordance with ISO 1217/DIN 1945 Part 1, calculated from an absolute pressure of 1 bar and a temperature of 20°C.The indicated performances and pressure dew points correspond to an operating pressure of 7 bar, a compressed air input temperature of 35°Cand an ambient air temperature of 25°C. Max. operating pressure 16 bar for a max. temperature of 50°C.
2) Condensate discharge with ball valve3)
With automatic condensate discharge
34 Schneider Druckluft
Compressed air preparation
Type max. compressor Dimension Weight Art. No.performance W x D x H
l/min.1) mm kg
Öwatec 10 1300/650 230x270x525 4 H 601 018
Replacement filter element B 201 013
1) Screw-type/Piston compressors (for 100% switch-on time)
Oil/water separator ● Fully-automatic separation and cleaning of oil-bearing compressed air condensate
● Two cleaning stages (prefilter and activecharcoal filter) and active charcoal filter for oilaerosols for the outgoing air
● Wall-hanging or floor-mounted assembly
Öwatec
VP replacement filter element
Type Art. No. Price E Type Art. No. Price EA) B) A) B)
VP 6 B 640 700 36.10 41.88 VP 10 B 640 701 44.30 51.39
Filter when using compressed air tools and manualblowing devices
● As a prefilter before the cold-dryer● Complete with VP filter element and an auto-
matic condensate discharger with ball valve
DVP prefilter● For discharging condensate and solid impuri-
ties with particles of up to 15 µm. Compressedair quality in accordance with ISO 8573.1
● For qualitatively inferior compressed air and
Type Volume current2) Air connection Weight Dimensions Art. No.l/min. On/Off kg (HxØ) mm
DVP 6 700 G 3/8"i 0.6 200x70 D 640 700
DVP 10 1300 G 1/2”i 1.1 240x105 D 640 701
Differential pressure gauge B 640 503
DFP micro-filter● For discharging micro-fine oil and water
aerosols and solid impurities with particles of upto 0.01 µm. Compressed air quality inaccordance with ISO 8573.1
● For high-quality compressed air for pneumaticcontrols, feed systems, for paint spraying
● Level of oil residue class 1● Complete with FP filter element and automatic
condensate discharger with ball valve
Type Volume current2) Air connection Weight Dimensions Art. No.l/min. On/Off kg (HxØ) mm
DFP 6 700 G 3/8"i 0.6 200x70 D 640 710
DFP 10 1300 G 1/2”i 1.1 240x105 D 640 711
Differential pressure gauge B 640 503
FP replacement filter element
Type Art. No. Price E Type Art. No. Price EA) B) A) B)
FP 6 B 640 710 36.10 41.88 FP 10 B 640 711 44.30 51.39
DAP active charcoal filter● For discharging oil vapours, smell and taste
substances. Compressed air quality inaccordance with ISO 8573.1
● For highest quality compressed air asbreathing air, for analysis technology, use inluxury foodstuffs
● Purest compressed air in association with anupstream micro filter
● Level of oil residue class 1 at the upstreamDFP micro-filter
● Complete with AP filter element, sealing plugsand locking plate
● Operation exclusively with upstream micro-filter
Type Volume current2) Air connection Weight Dimensions Art. No.l/min. On/Off kg (HxØ) mm
DAP 6 700 G 3/8"i 0.6 200x70 D 640 720
DAP 10 1300 G 1/2”i 1.1 240x105 D 640 721
2) Air volume current in accordance with ISO 7183 (input pressure of 7 bar, air input temperature of 35 °C)
Maximum oil input concentration: 15 mg/m3
AP replacement filter element
Type Art. No. Price E Type Art. No. Price EA) B) A) B)
AP 6 B 640 720 36.10 41.88 AP 10 B 640 721 44.30 51.39
Click and ready -our unique plug-in pipe system of12-28 mm.It has never been so easy toassemble compressed air pipesystems as it is with our inno-vative plug-in system. A singleclick is sufficient to assemblepipes and distribution boxes /fittings. The connectionremains absolutely secure fordecades and can be loadedwith up to 15 bar. Moreover:Schneider Druckluft has recei-ved a TÜV (Technical InspectionAgency) certificate and is for thetime being the only manufactu-rer in accordance with thePressure Devices Guideline forthe impermeability of its pipesystems.
If you want to re-equip orextend the plug-in system at alater date, you can dismantle itas fast as lightning and re-useit immediately afterwards.Without reducing the quality.Particularly practical for ourunique plug-in system: You donot require any expensive spe-cial tools for the assembly Thecompressed air pipes are sim-ply cut to length, deburred andplaced in the connection piece(fitting) - until it clicks. No wel-ding, no soldering, no glueing.There's simply no easier!
Plugging, screwing or clamping -perfect pipe systems from Schneider Druckluft.
Schneider Druckluft 35
Oil-resistant O ring:For absolute imper-meability, even foroil-bearing compres-sed air.
Pipe limit stop: For the "click", if thepipe stops here.
Spacer:For strategically adju-sted centring of thepipe in the fitting - itsaves the O ring.
Stainless steelholding claw:For a thrust-coherentand secure grip ofthe pipe.
Compact metalbody: For the best breakagesecurity.
Supporting bushing: For optimal fixing allof the componentparts in the rightposition.
Disassembly ring: For easy separationof the plug connec-tion - unintentionalloosening is excluded.
All advantages of the unique plug-in systems at a glance:
Time-saving: Easy assembly -without long preparation.Cost-saving: As a result of re-usability - without tools. Hardwearing: Absolutely shatter-proof and can be used fordecades with its compactmetal body.Secure: The thrust-coherentconnection provides a durableseal. It saves expensive energy.Flexible: Re-fitting or convertingpossible within minutes.
Quick: Completely serviceableimmediately after assembly, noannoying waiting times for har-dening or drying.Maintenance-free: Corrosion-resi-stant fittings and smooth interi-or walls offer durably a full airpassageway and optimal cur-rent proportions.Energy-saving: The large interiordiameter guarantees a regularflow rate - drops in pressureand turbulence are practicallyinexistentRobust: Insensitive of light oscil-lations and mechanical loads.
Our plug-in system for diameters of35-42 mm.This plug-in system is desi-gned for aluminium pipes with35 and 42 mm Ø and loadableup to 15 bar.
The screw-on / clamping system. Jerk, shrug and seal. Up to 13bar.For particularly long compres-sed air lines and a high flowrate, the screw-on/clampingsystem for plastic pipes hasbest proven itself in practice.For pipes from 32 to 63 mm,can be loaded up to 13 bar.
The brass clamp ring system withmetal fittings. Up to 15 bar.For an air flow of more than4.000l/min. For aluminiumpipes from 32 to 63 mm Ø.Withstands itself the strongeststrain and is nevertheless theeasiest to assemble - withoutany special tools.
Perfect connections - even for larger line diameters.
Schneider Druckluft36
Further information on our pipesystems for larger diameterscan be found in our cataloguefor industry and trade.
New: This TÜV (TradeInspection Agency) certificatecertifies the impermeability ofour pipe systems in accordan-ce with the Pressure DevicesGuideline. Up to now, it hasnamed Schneider Druckluft assole manufacturer.
Our plastic compressed airpipes from networked poly-ethylene are available from thebobbin or from the rod. Weightadvantage: only about a quar-ter the weight of traditionalsteel pipes. Therefore, noexpensive holding facilities arenecessary either. Easy assem-bly on the ceiling or wall withtube clamps. In addition corro-sion-resistant and maintenan-ce-free - this ensures a longlife cycle. We recommend our pipes in aspecial aluminium alloy forinterior and exterior installati-ons. They are calibrated, rigid,powder-coated in blue and 6mlong. Because they are light,stable and easy to lay withtube clamps, they are ideal asa main line – they can be com-bined well with flexible PAtubing.
From the bobbin or from the rod.Always thought out.
Schneider Druckluft 37
Our bobbin and rod goods areavailable in many differentlengths and diameters. Theconnection pieces for our pipesystems are just as versatile.According to the principle: Theoptimal solution for each use!
38 Schneider Druckluft
Compressed Air Pipe Systems
Click system Now with metal connectors for pressure loads up to 15 bar!12-28 mmCommon features:● High safety level up to 15 bar pressure due to metal fittings● For polyamide or special aluminium alloy compressed air pipes● Easy to assemble, no preparation needed, simply click together● No soldering, no cutting thread, no sealing material. The push-in
connection provides a strong and permanent seal.● Can be used straight after assembly – no waiting, as hardening/drying
not necessary● Cost-effective as it can be re-used after dismantling● The metal pieces are unbreakable and will last for decades
● Rust-resistant fittings along with the smooth, maintenance-freeinner surface of pipes allow for a lasting full airflow and optimumflow environment
● Non-sensitive to slight vibrations and mechanical pressure –plastic pipes maintain their shape
● Exceptional optics due to straight and precisely-laid aluminiumpipes (even with suspended pipes)
● Wide range of distribution blocks and connectors
Securing ● Standard electric conduits with securing plate and 70 mm depth Art. No.can be used to lay compressed air piping out of view
● Ideal for all rooms unsuitable for compressed air pipes,e.g. offices, surgeries, laboratories
● Easy to assembly E 815 300 E 815 300● Suitable for pipes of 12 and 15 mm ø● Suitable for LDK and EVK series of pipe block
Assemblying Pipesin Electrical Conduits Compressed air pipes are hidden from view
1) The stated air quantities refer to a gauge pressure of 7 bar and a pressure loss of 0.1 bar over 25 m
Base
Name and Application System/Ø Description Art. No.12 15 18 22 28
Compressed Air Pipe For Interior UseCoilsFor air quantities up to 400 l/min. 1) ● 12 x 1.5 mm (length 10 m) E 812 000For air quantities up to 400 l/min. 1) ● 12 x 1.5 mm (length 25 m) E 812 002For air quantities up to 600 l/min. 1) ● 15 x 1.5 mm (length 25 m) E 815 000For air quantities up to 600 l/min. 1) ● 15 x 1.5 mm (length 10 m) E 815 101For air quantities up to 1000 l/min. 1) ● 18 x 2 mm (length 25 m) E 818 000For air quantities up to 1000 l/min. 1) ● 18 x 2 mm (length 10 m) E 818 101For air quantities up to 1800 l/min. 1) ● 22 x 2 mm (length 25 m) E 822 000For air quantities up to 2500 l/min. 1) ● 28 x 2.5 mm (length 25 m) E 828 001
Per Pipe, length 6 m, colour blue, ● 15 x 1.5 mm E 815 105rigid, no bend radius ● 18 x 2 mm E 818 105
● 22 x 2 mm E 822 105● 28 x 2.5 mm E 828 100
Special Aluminium Alloy ● 15 x 1.5 mm E 815 200Rigid, powder-coated, blue, ● 18 x 1.5 mm E 818 200length 6 m, for interior and exterior ● 22 x 2 mm E 822 200solid and easy to install with few clamps. ● 28 x 2 mm E 828 200Excellent optics due to straight andprecisely laid aluminium pipes.Can be combined with flexible PA hose.
Special Aluminium Alloyin special moulds, length 600 mm
Outlet "gooseneck" ● E 815 357● E 818 357
Elbow 90° ● E 815 450● E 818 450
● E 822 450● E 828 450
Elbow 45° ● E 815 451● E 818 451
● E 822 451● E 828 451
Expansion angular ● E 815 449● E 818 449
● E 822 449● E 828 449
Schneider Druckluft 39
Compressed Air Pipe Systems
Click system Now with metal connectors for pressure loads up to 15 bar!12-28 mmName and Application System/Ø Description Type
12 15 18 22
Air Inlet Block ● LEK12 - R 1/2”i - GES12 E 812 301LEK ● LEK15 - R 1/2”i - GES15 E 815 303
hose connects compressor and air inletblock.
Air Flow Block Small block (approx. 48 x 43 mm) for airLDK exit for one device.
Wall or ceiling assembly (with 2 screws)Without quick release coupling ● LDK12 - R 3/8”i - 2GES12 E 812 306
● LDK15 - R 3/8”i - 2GES15 E 815 306
With quick release coupling ● LDK12 - R 3/8”i - 2GES12 E 812 324● LDK15 - R 3/8”i - 2GES15 E 815 324
End Distribution Block Small block (approx. 48 x 43 mm) forEVK wall or ceiling assembly (with 2 screws).
Air distribution for one device.Without quick release coupling ● EVK 12 - R 3/8”i - GES12 E 812 304
● EVK 15 - R 3/8”i - GES15 E 815 304
With quick release coupling ● EVK 12 - R 3/8”i - GES12 E 812 315● EVK 15 - R 3/8”i - GES15 E 815 315
End Distribution Block Includes filter pressure reducer R ¼”, ● EVK12 - GES12 - FDM E 812 327manometer and quick release coupling. ● EVK15 - GES15 - FDM E 815 330Wall assembly (with 2 screws)
Air Inlet Block ● LE15 - R 1/2”i - GES15 E 815 301● LE15 - R 3/4”i - GES15 E 815 302
● LE18 - R 1/2”i - GES18 E 818 301A flexible hose connects compressor ● LE18 - R 3/4”i - GES18 E 818 302and air inlet block ● LE22 - R 3/4”i - GES22 E 822 301
Air Distribution Block ● LV15 - 3GES15 E 815 305● LV18 - 3GES18 E 818 305
● LV22 - 3GES22 E 822 305
Air Exit Block ● LA15 - 2GES15 - WS15 E 815 307● LA18 - 2GES18 - WS18 E 818 307
● LA22 - 2GES22 - WS22 E 822 307● LA22 - 2GES22 - WS15 E 822 309● LA22 - 2GES22 - WS18 E 822 308
With quick release coupling connectingcompressor with compressed air pipe.Wall assembly (with 3 screws).
Air outlet through air flow and end distributionblock - with gooseneck to avoid movementof condensateWall assembly (with 3 screws)
For air distribution- on 2 sides in ring system- for device at outlet pipesAdditional air outlet possible by replacing plugwith quick release coupling or maleconnector for wall and ceiling assembly(with 3 screws)
With quick release coupling connectingcompressor and compressed air pipe.Wall assembly (with 3 screws). A flexible
40 Schneider Druckluft
Compressed Air Pipe Systems
Click system Now with metal connectors for pressure loads up to 15 bar!12-28 mmName and Application System/Ø Type Art. No.
12 15 18 22
Air Flow Block Air outlet for device,LD approx. 70 x 78 mm
Wall or ceiling assembly (with 3 screws)Without quick release coupling ● LD15 - R 1/2”i - 2GES15 E 815 322
● LD18 - R 1/2”i - 2GES18 E 818 322● LD22 - R 1/2”i - 2GES22 E 822 322
With quick release coupling ● LD15 - R 1/2”i - 2GES15 E 815 323● LD18 - R 1/2”i - 2GES18 E 818 323
● LD22 - R 1/2”i - 2GES22 E 822 323
End Distribution Block For air distribution to end points in the outletWithout quick release pipes (approx. 70 x 78).coupling Wall or ceiling assembly (with 4 screws)
Air distribution 1x ● EV15 - R 1/2”i - GES15 E 815 347● EV18 - R 1/2”i - GES18 E 818 347
● EV22 - R 1/2”i - GES22 E 822 347
Air distribution 2x ● EV15 - 2xR 1/2”i - GES15 E 815 348● EV18 - 2xR 1/2”i - GES18 E 818 348
● EV22 - 2xR 1/2”i - GES22 E 822 348
Air distribution 3x ● EV15 - 3xR 1/2”i - GES15 E 815 349● EV18 - 3xR 1/2”i - GES18 E 818 349
● EV22 - 3xR 1/2”i - GES22 E 822 349
Without Quick Release Air distribution 1x ● EV15 - R 1/2”i - GES15 E 815 313Coupling, with Shut-Off ● EV18 - R 1/2”i - GES18 E 818 313Valve ● EV22 - R 1/2”i - GES22 E 822 313
Air distribution 2x ● EV15 - 2xR 1/2”i - GES15 E 815 342● EV18 - 2xR 1/2”i - GES18 E 818 342
● EV22 - 2xR 1/2”i - GES22 E 822 342
Air distribution 3x ● EV15 - 3xR 1/2”i - GES15 E 815 343● EV18 - 3xR 1/2”i - GES18 E 818 343
● EV22 - 3xR 1/2”i - GES22 E 822 343
End Distribution BlockWith quick release Air distribution 1x ● EV15 - R 1/2”i - GES15 E 815 310coupling ● EV18 - R 1/2”i - GES18 E 818 310
● EV22 - R 1/2”i - GES22 E 822 310
Air distribution 2x ● EV15 - 2xR 1/2”i - GES15 E 815 312● EV18 - 2xR 1/2”i - GES18 E 818 312
● EV22 - 2xR 1/2”i - GES22 E 822 312
Air distribution 3x ● EV15 - 3xR 1/2”i - GES15 E 815 329● EV18 - 3xR 1/2”i - GES18 E 818 329
● EV22 - 3xR 1/2”i - GES22 E 822 329
Schneider Druckluft 41
Compressed Air Pipe Systems
Click system Now with metal connectors for pressure loads up to 15 bar!12-28 mmName and Application System/Ø Description Art. No.
12 15 18 22
End Distribution Block Wall or ceiling assembly (with 4 screws)with Quick ReleaseCoupling and Shut-Off Air distribution 1x ● EV15 - R 1/2”i - GES15 E 815 316Valve ● EV18 - R 1/2”i - GES18 E 818 316
● EV22 - R 1/2”i - GES22 E 822 316
Air distribution 2x ● EV15 - 2xR 1/2”i - GES15 E 815 317● EV18 - 2xR 1/2”i - GES18 E 818 317
● EV22 - 2xR 1/2”i - GES22 E 822 317
Air distribution 3x ● EV15 - 3xR 1/2”i - GES15 E 815 318● EV18 - 3xR 1/2”i - GES18 E 818 318
● EV22 - 3xR 1/2”i - GES22 E 822 318
End Distribution Block The safety coupling releases the airwith Safety Coupling before the compressed air hose can beand Shut-Off Valve removed, thus avoiding accidents.
Air distribution 1x ● EV15 - GES15-1 SK E 815 311With 1 safety coupling ● EV18 - GES18-1 SK E 818 311
● EV22 - GES22-1 SK E 822 311
Air distribution 2x ● EV15 - GES15-2 SK E 815 344With 2 safety couplings ● EV18 - GES18-2 SK E 818 344
● EV22 - GES22-2 SK E 822 344
Air distribution 3x ● EV15 - GES15-3 SK E 815 340With 3 safety couplings ● EV18 - GES18-3 SK E 818 340
● EV22 - GES22-3 SK E 822 340
End Distribution Block ● EV15 - GES15 - DM/S E 815 325with Shut-Off Valve ● EV18 - GES18 - DM/S E 818 325
● EV22 - GES22 - DM/S E 822 325
Includes pressure reducer R ¼”,manometer, quick release coupling withshut-off valve for uncontrolled pressure.Wall assembly (with 4 screws)Range: 0-12 barRecommended for cold drier compressorsystems
End Distribution Block ● EV15 - GES15-2 DM E 815 326with Shut-Off Valve ● EV18 - GES18-2 DM E 818 326
● EV22 - GES22-2 DM E 822 326
End Distribution Block ● EV15 - GES15-2 DM/N E 815 327with Shut-Off Valve ● EV18 - GES18-2 DM/N E 818 327
● EV22 - GES22-2 DM/N E 822 327
Includes 2 pressure reducers R ¼”,manometer, quick release coupling andshut-off valve.Wall assembly. Recommended for cold driercompressor systems
Includes pressure reducer R ¼”, manometerand quick release coupling and alsopressure reducer R ¼”, manometer,lubricator, quick release coupling withshut-off valve.Wall assembly (with 4 screws)Recommended for cold drier compressorsystems
42 Schneider Druckluft
Compressed Air Pipe Systems
Click system Now with metal connectors for pressure loads up to 15 bar!12-28 mmName and Application System/Ø Description Art. No.
12 15 18 22 28
End Distribution Block Includes filter pressure reducer R ¼” with ● EV15 - GES15 - FDM E 815 319with Shut-Off Valve manual condensate discharger, manometer ● EV18 - GES18 - FDM E 818 319
and quick release coupling with shut-off ● EV22 - GES22 - FDM E 822 319valve.Wall assembly (with 4 screws)Range: 0 – 12 bar, filter unit 20 µm.Recommended for compressor systemswithout cold drier
End Distribution Block Includes filter pressure reducer R ¼” with ● EV15 - GES15 - FDM/S E 815 320with Shut-Off Valve manual condensate discharger, manometer ● EV18 - GES18 - FDM/S E 818 320
and quick release coupling and also 1 ● EV22 - GES22 - FDM/S E 822 320coupling with shut-off valve for uncontrolledpressure.Wall assembly (with 4 screws)Range: 0 – 12 bar, filter unit 20 µm.Recommended for compressor systemswithout cold drier
End Distribution Block Includes filter pressure reducer R ¼” with ● EV15 - GES15 - FDM/FDMN E 815 321with Shut-Off Valve manual condensate discharger, manometer ● EV18 - GES18 - FDM/FDMN E 818 321
and quick release coupling and maintenance ● EV22 - GES22 - FDM/FDMN E 822 321unit R ¼” consisting of filter pressurereducer r ¼”, lubricator, manometer andquick release coupling with shut-off valve.Wall assembly (with 4 screws)Range: 0 – 12 bar, filter unit 20 µm.
Air Shut-Off Valve To shut off compressed air pipe or individual ● LAH15 - 2GES15 E 815 350areas of a single-feeder, ring or outlet pipe. ● LAH18 - 2GES18 E 818 350
● LAH22 - 2GES22 E 822 350● LAH28 - 2GES28 E 828 350
Water Collector For installation at the end of a pipe or aslight incline.Manual operation ● WSM12 E 812 345Includes t-connector and ball valve with ● WSM15 E 815 414male connector ● WSM18 E 818 414
● WSM22 E 822 414
Automatic operation ● WSA15 E 815 345With automatic condensate discharger with ● WSA18 E 818 345floating valve, otherwise as WSM ● WSA22 E 822 345
Schneider Druckluft 43
Compressed Air Pipe Systems
Click system Now with metal connectors for pressure loads up to 15 bar!12-28 mmName and Application System/Ø Description Art. No.
12 15 18 22 28
Connector For easy connection of pipes, no toolsneeded
Straight male connector ● GES12 - G 1/2”a E 812 031● GES15 - G 1/2”a E 815 335
● GES18 - G 3/4”a E 818 334● GES18 - G 1/2”a E 818 335
● GES22 - G 3/4”a E 822 334● GES22 - G 1/2”a E 822 335
● GES28 - G 1”a E 828 335
Straight female connector ● GES15 - G 1/2”i E 815 333● GES18 - G 1/2”i E 818 332● GES18 - G 3/4”i E 818 333
● GES22 - G 1/2”i E 822 332● GES22 - G 3/4”i E 822 333
● GES28 - G 1”i E 828 333
Straight connector ● GS12 E 812 337● GS15 E 815 337
● GS18 E 818 337● GS22 E 822 337
● GS28 E 828 337
Elbow connector 90° ● WS12 E 812 338● WS15 E 815 338
● WS18 E 818 338● WS22 E 822 338
● WS28 E 828 338
Elbow connector 45° ● WS15/45 E 815 355● WS18/45 E 818 355
● WS22/45 E 822 355● WS28/45 E 828 355
Elbow male connector ● WE15 - G 1/2”a E 815 336● WE18 - G 1/2”a E 818 336
● WE22 - G 3/4”a E 822 336● WE28 - G 1”a E 828 336
T connector ● TS12 E 812 339● TS15 E 815 339
● TS18 E 818 339● TS22 E 822 339
● ● TS22-15-22 E 822 330● ● TS22-18-22 E 822 331
● TS28 E 828 339● ● TS28-18-18 E 828 328● ● TS28-18-28 E 828 330
● ● TS28-22-22 E 828 329● ● TS28-22-28 E 828 331
Reduction connector ● ● GS18x22 E 822 351● ● GS18x28 E 828 340
● ● GS22x28 E 828 341
Sliding sleeve ● SM 15 E 815 352● SM 18 E 818 352
● SM 22 E 822 352● SM 28 E 828 352
Blanking nut ● BK15 E 815 314Simple way of shutting-off pipe ● BK18 E 818 314
● BK22 E 822 314● BK28 E 828 314
44 Schneider Druckluft
Compressed Air Pipe Systems
Click system Now with metal connectors for pressure loads up to 15 bar!12-28 mm
Connecting piece ● VS15 x 1/2" a E 815 360● VS18 x 1/2" a E 818 360● VS18 x 3/4" a E 818 361
● VS22 x 1/2" a E 822 360● VS22 x 3/4" a E 822 361
● VS28 x 1" a E 828 361
End Distribution Block Small block (appr. 48 x 43 mm) for wall or Anschlüsseceiling assembly (with 2 screws) A BAir distribution for one device G3/8" G1/2" EVK 3/8" - 1/2" E 800 200
Air Flow Block Small block (appr. 48 x 43 mm) for air outlet G3/8" 2xG1/2" LDK 3/8" - 2 x 1/2" E 800 201for end deviceWall or ceiling assembly
Air Distribution Block G1/2" 3xG1/2" LV 4 x 1/2" E 800 208G1/2" 3xG3/4" LV 1/2" - 3 x 3/4" E 800 209
End Distribution Block For air distribution to end points in outletwithout Quick Release pipes (appr. 70 x 78 mm).Coupling Wall or ceiling assembly (with 4 screws)
Air distribution 1x G1/2" G1/2" EV 2 x 1/2" E 800 202G1/2" G3/4" EV 1/2" - 3/4" E 800 203
Air distribution 2x 2xG1/2" G1/2" EV 3 x 1/2" E 800 2042xG1/2" G3/4" EV 2 x 1/2" - 3/4" E 800 205
Air distribution 3x 3xG1/2" G1/2" EV 4 x 1/2" E 800 2063xG1/2" G3/4" EV 3 x 1/2" - 3/4" E 800 207
Dismantling Pliers ● DZ15 B 322 670● DZ18 B 322 671
● DZ22 B 322 672● DZ28 B 322 673
Dismantling Clip ● DC15 B 322 674● DC18 B 322 675
● DC22 B 322 676● DC28 B 322 677
Chamfer Tool To chamfer and burr aluminium and PA pipes ● ● ● ● ● B 322 678for easier insertion into connectors
Name and Application System/Ø Description Art. No.12 15 18 22 28
For air distribution- on two sides in a ring system for deviceson outlet pipes
A
BB
A
BB
B
B
A
A
B
Schneider Druckluft 45
Compressed Air Pipe Systems
Assembly For Click Systems 12-28 mmAids Name and Application System/Ø Description Qty. in Art. No.
12 15 18 22 28 Kit
Pipe Clips For rawlplug assembly ● RK12 blue 25 E 812 025Colour blue ● RK15 blue 25 E 815 025Compressed air pipe easily assembled ● RK18 blue 25 E 818 025by pressing into clip. With deep bore-hole ● RK22 blue 25 E 822 025to secure screws and central point on ● RK28 blue 25 E 828 025base for precise aligning. Screwheadinserted right into base,unbreakable in the cold
Securing Kit For pipe clips (screws zinc-galvanised) 4 x 35 mm/S6 40 B 030 2024 x 35 mm/S6 100 B 030 203
For distribution blocks (screws zinc-galvanised) 5 x 45 mm/S6 50 B 030 205
Assembly Clips 1) For iron supports, thickness 1–4 mm ● ● 50 E 815 028● 50 E 822 028
For iron supports, thickness 4–7 mm ● ● 50 E 815 026● 50 E 822 026
● 50 E 832 026For iron supports, thickness 8-12 mm ● ● 50 E 815 027
● 50 E 822 027● 50 E 832 027
Clip Bracket 1) For assembly clips (1-4 mm)for thickness 13-20 mm ● ● ● 50 E 800 100
Pipe Clip 15 - 19 mm 25 E 818 44821 - 23 mm 25 E 822 44826 - 28 mm 25 E 828 448
Pipe Cutters For PA pipes up to 28 mm Ø Typ 28 1 D 200 602(with revolving blade). Hammer functionSpare blade (contains 2) B 322 687
Pipe clip for PA pipes of up to 14 mm Ø Typ 14 1 D 200 100
Spare blade for pipe cutters up to 22 mm Ø (contains 2) Typ 22 B 322 686
Heavy Duty Pipe Cutters For aluminium pipes 15–32 mm Ø Typ 32 A 1 D 200 108
Spare blade 1 B 322 291
Chamfer Bell To chamfer and burr aluminium and PA pipes 1 B 800 555for easier insertion into connectorsFor inner and outer-Ø up to 32 mm
Deburring blade To burr the inner-Ø of aluminium pipes 1 D 200 603
1) zinc-galvanised
Schneider Druckluft maintenance devices.Light, compact and robust.
Features and advantages at a glance:! Developed for use in mea-
surement and control tech-nology, in pneumatics anddental technology as well asin the laboratory.
! High flow rates for lessdrops in pressure.
! High control accuracy withwell readable, finely adju-stable pressure gaugesincorporating precise sub-divisions
! Maintenance-free operationsaves time and money
! For directly securing tomachines and componentparts or for fitting into con-trol panels
! No unintentional adjustment- can be locked using thecontrol knob for the pressu-re reducer and the filterpressure reducer
Schneider Druckluft46
Schneider Druckluft 47
Maintenance devices
Compact Series Light and compact maintenance devicesfor an air volume current of 50–600 l/min.
Common features:¸ Particularly for use in measurement and control
technology, laboratories, dental technology andpneumatics.
¸ High flow rates for a slight drop in pressure¸ High control accuracy¸ Maintenance-free operation
¸ Inlet pressure max. 13 bar¸ Suitable for directly fixing to machines and
components or for fitting into control boards.¸ Silicon-free¸ Control knob with pressure reducer and
lockable filter pressure reducer
¸ Patented rolled membrane and new bleedfunction for accurate and quick controlling.
¸ High secondary pressure stability (settingpressure) even when the input pressure or theflow rate changes.
¸ Assembly independent from the direction offlow is possible, since there are connectionpossibilities on both sides for the pressuregauge.
¸ Control range: 0-8 bar.¸ Mass-produced with pressure gauge
Flow rate diagramsMeasurements for an input pressure of 8 bar. Theset pressure can be read directly on the left (2, 4and 6 bar).Example: 1/4” pressure reducer: Set value 6 bar.5 bar pressure remain available after use of thepressure reducer at 500l/min.
Pressure reducer
Type Dimensions in mm Connection Con.Press. Art. No.A B C D E F gauge
DM 1/4” 77 35 40 40 31 G 1/4”i G 1/8"i D 202 003
Type Dimensions in mm Connection Con.Press. Art. No.A B C D E F gauge
FDM 1/4” 156 110 40 40 31 G 1/4”i G 1/8"i D 225 027
Filter pressure reducer ¸ Combines the technical advantages of thepressure reducer and the filter / waterseparator in an even more compact size.
¸ Semi-automatic bleeding.¸ Condensate vessel: 16 cm3
¸ Control range 0-12 bar.¸ Mass-produced with pressure gauge and filter
element 50 µm.
Flow rate diagramsMeasurements for an input pressure of 8 bar. Theset pressure can be read directly on the left (2, 4and 6 bar).Example: 1/4” filter pressure reducer: Set pressure:6 bar. 5 bar pressure remain available after use ofthe regulator at 500l/min.
48 Schneider Druckluft
Type Dimensions in mm Connection Art. No.A B C D E F
FWA 1/4” 100 24 40 40 31 G 1/4”i D 221 003
¸ Regular oil supply by fine adjustment.¸ Proportional adjustment of the oil supply to the
air flow rate is possible, and therefore also forlow pressure and a low air flow rate optimallubrication.
¸ As processing stage after use of the filterpressure reducer.
¸ Mist oiler with attachment parts for later attach-ment to compressors with a filter pressurereducer belonging to the Compact Series.Enables the withdrawal of oil-free and oil-bearing compressed air.
Flow rate diagramsMeasurements for various input pressures: A = 2bar; B = 4 bar; C = 6 bar; D = 8 bar; E = 10 bar. Thedrop in pressure is indicated in bar.Example: 1/4” mist oiler: For an input pressure of 8bars (= D) and a drop in pressure of 0.5 bar, themaximum flow rate is 280 l/min.
Mist oiler
Type Dimensions in mm Connection Vol.Oil ves. Art. No.A B C D E F cm3
N 1/4” 137 24 40 40 31 G 1/4”i 26.5 D 223 002 with attachment parts N 1/4” 137 24 40 40 31 G 1/4”i 26.5 D 012 412
Filter water separator ¸ Two-stage mechanical filter with 20 µm.¸ Maximum discharge of dirt particles and
condensate by centrifugal acceleration of thecompressed air.
¸ As cleaning stage before use of the pressurereducer.
¸ Slight drop in pressure.¸ Semi-automatic bleeding.¸ Condensate vessel 16 cm3
Flow rate diagramsMeasurements for various input pressures: A = 2bar; B = 4 bar; C = 6 bar; D = 8 bar; E = 10 bar. Thedrop in pressure is indicated in bar.Example: 1/4” filter / water separator: For an inputpressure of 8 bar (= D) and a drop in pressure of0.35 bar, the maximum flow rate is 840 l/min.
Maintenance devices
Compact Series Light and compact maintenance devicesfor an air volume current of 50–600 l/min.
¸ Completely assembled¸ G 1/4”i connection thread
Maintenance Unit
Type consisting of Art. No.
1/4” double WE Filter pressure reducer, mist oiler, pressure gauge D 221 004
¸ The technical data corresponds to that for thesingle devices
Art. No.
Filter element 20 µm, complete B 200 711
Connection set for assembling two or three Compact Series devices B 200 705
Angular fixing for easy and quick wall securing B 200 701
Accessories
Schneider Druckluft 49
Maintenance devices
Shop Floor Series Robust maintenance devices with metal casingfor an air volume current of up to 3000 l/min.
Type Connection Dimensions in mm Con.Press. Art. No.thread A B C D E gauge
DM 1/4” R 1/4”i 42 94 42 42 32 G 1/8"i D 202 002
DM 3/8” R 3/8"i 60 130 60 60 46 G 1/8"i D 302 002
DM 1/2” R 1/2”i 60 130 60 60 46 G 1/8"i D 402 002
DM 3/4” R 3/4”i 80 184 80 80 66 G 1/4"i D 502 002
DM 1” R 1”i 80 184 80 80 66 G 1/4"i D 602 002
Common features:¸ Specially for robust use on the shop floor level.¸ High flow rates for low drops in pressure reduce
the energy costs¸ Flexible installation with modularity;
Right and left assembly are both possible
¸ High control accuracy¸ Maintenance-free operation¸ Max. input pressure 18 bar¸ Silicon-free¸ Control knob with pressure reducer and
lockable filter pressure reducer
¸ Bleed function for accurate and quick controlling.¸ High functional security by pressure regulation
with piston.¸ High secondary pressure stability (ON press-
ure) even when the input pressure or the flowrate changes.
¸ Lockable control knob¸ Assembly independent from the direction of flow
is possible, since there are connection possibili-ties on both sides for the pressure gauge.
¸ Control range: 0-12 bar.¸ Mass-produced with pressure gauge¸ For assembling on machines or walls. Can be
integrated into control panels.
Pressure reducer
1/4” pressure reducer 3/8” – 1/2” pressure reducer 3/4” – 1/2” pressure reducer
¸ Combines the technical advantages of thepressure reducer and the filter / waterseparator in of an even more compact size.
¸ Semi-automatic bleeding.¸ G 1/8”i pressure gauge connection¸ Control range: 0-12 bar.
Filter pressure reducer
Type Connection Dimensions in mm Cond. ves. Art. No.thread A B C D E Vol. cm³
FDM 1/4” G 1/4”i 42 190 42 42 36 10 D 225 026
FDM 3/8” G 3/8”i 60 245 60 60 52 45 D 325 026
FDM 1/2” G 1/2"i 60 245 60 60 52 45 D 425 026
FDM 3/4” G 3/4”i 72 278 65 110 92 75 D 458 305 1)
FDM 1” G 1”i 72 278 65 112 92 75 D 468 305 1)
¸ Mass-produced with pressure gauge and filterelement 20 µm.
¸ For assembling on machines or walls.
Flow rate diagramsSee next page.
Flow rate diagramsMeasurements for an input pressure of 8 bar. Theset pressure can be read directly on the left (2, 4and 6 bar).Example: 1/4” pressure reducer: Set pressure6 bar. At 700l/min 5 bar pressure remain availableafter use of the pressure reducer.
50 Schneider Druckluft
Maintenance devices
Shop Floor Series Robust maintenance devices with metal casingfor an air volume current of up to 3000 l/min.
Measurements for an input pressure of 8 bar. Theset pressure can be read directly on the left (2, 4and 6 bar).
Flow rate diagramsfor the filter pressurereducer
¸ Maximum discharging of dirt particles andcondensate by centrifugal acceleration of thecompressed air.
¸ Two-stage mechanical filter with 20 µm.¸ As cleaning stage before use of the pressure
reducer.¸ Low drop in pressure.¸ Semi-automatic bleeding.
Flow rate diagramsMeasurements for various input pressures: A = 2bar; B = 4 bar; C = 6 bar; D = 8 bar; E = 10 bar. Thedrop in pressure is indicated in bar.Example: 1/4” filter: For an input pressure of8 bar (= D) and a drop in pressure of 0.35 bar, themaximum flow rate is 1250 l/min.
Filter water separator
Type Connection Dimensions in mm Cond. ves. Art. No.thread A B C D E Vol. cm³
FWA 1/4” G 1/4”i 42 142 42 42 32 10 D 221 002
FWA 3/8” G 3/8”i 60 180 60 60 49 20 D 321 002
FWA 1/2” G 1/2"i 60 180 60 60 49 20 D 421 002
FWA 3/4” G 3/4”i 80 235 80 80 64 30 D 521 002
FWA 1” G 1”i 80 235 80 80 64 30 D 621 002
1) For air volume currents of up to 4500 l/min.
Example: 1/4” filter pressure reducer: Set pressure:6 bar. At 700 l/min. 5 bar pressure remain availableafter use of the regulator.
1/4” filter pressure reducer 3/8” – 1/2” filter pressure reducer 3/4” – 1” filter pressure reducer
1/4” filter 3/8” – 1/2” filter 3/4” – 1” filter
Schneider Druckluft 51
Maintenance devices
Shop Floor Series Robust maintenance devices with metal casingfor an air volume current of up to 3000 l/min.
¸ Regular oil supply by fine adjustment.¸ Proportional adjustment of the oil supply to the
air flow rate is possible, and therefore also forlow pressure and a low air flow rate optimallubrication.
¸ As processing stage after use of the filterpressure reducer.
¸ Can be integrated anywhere thanks to itscompact construction dimensions.
Flow rate diagramsMeasurements for various input pressures: A = 2bar; B = 4 bar; C = 6 bar; D = 8 bar; E = 10 bar. Thedrop in pressure is indicated in bar.Example: 1/4” mist oiler: For an input pressure of 8bar (= D) and a drop in pressure of 0.4 bar, themaximum flow rate is 800 l/min.
Mist oiler
Type Connection Dimensions in mm Oil vessel Art. No.thread A B C D E Vol. cm³
N 1/4” G 1/4”i 42 156 42 42 32 50 D 223 001
N 3/8” G 3/8”i 60 195 60 60 46 150 D 323 001
N 1/2” G 1/2"i 60 195 60 60 46 150 D 423 001
N 3/4” G 3/4”i 80 260 80 80 66 379 D 523 001
N 1” G 1”i 80 260 80 80 66 379 D 623 001
1/4” oiler 3/8” – 1/2” oiler 3/4” – 1” oiler
¸ Consisting of a filter pressure reducer and amist oiler.
¸ Completely assembled¸ Control range 0-12 bar.¸ Semi-automatic drainage
¸ Mass-produced with pressure gauge and filterelement 20 µm.
¸ For assembling on machines or walls.¸ The technical data corresponds to that of the
individual parts.
Double maintenance unit
Type Connection thread Art. No.
1/4” double WE G 1/4”i D 226 026
3/8” double WE G 3/8”i D 326 026
1/2” double WE G 1/2"i D 426 026
3/4” double WE G 3/4”i D 458 405 1)
1” double WE G 1”i D 468 405 1)
¸ Consisting of a filter water separator, a press-ure reducer and a mist oiler.
¸ Completely assembled¸ Control range 0-12 bar.¸ Semi-automatic drainage
¸ Mass-produced with pressure gauge and filterelement 20 µm.
¸ For assembling on machines or walls.¸ The technical data corresponds to that of the
individual parts
Triple maintenance unit
Type Connection thread Art. No.
1/4” triple WE G 1/4”i D 224 026
3/8” triple WE G 3/8”i D 324 026
1/2” triple WE G 1/2"i D 424 026
3/4” triple WE G 3/4”i D 524 026
1” triple WE G 1”i D 624 026
1) For air volume currents of up to 4500 l/min.
52 Schneider Druckluft
Maintenance devices
Type Art. No
Filter element 20 µm, complete 1/4” G 405 012
3/8” + 1/2” G 405 013
3/4” + 1” G 405 014
Angular fixing for easy and quick wall securing 1/4” B 200 701
3/8” + 1/2” B 400 701
3/4” + 1” B 400 703
Dismantling key for condensate vessels B 400 707
Typ Art. No.
Condensate outlet valve ● Chrome-plated brass G 1/4”a E 030 050
● O ring gasket on the valve seat
● With knurled head screw G 3/8”a E 030 051
Pressure Attach- Connection Ø Pressure Art. No.gauge ment 1) mm bar
H G 1/8" 40 0 - 10 E 670 014H G 1/8" 50 0 - 16 G 012 038H G 1/4" 50 0 - 16 E 670 002H G 1/4" 50 0 - 25 E 670 003V G 1/4" 50 0 - 16 E 670 004V G 1/4" 50 0 - 25 E 670 005H G 1/4" 63 0 - 16 E 670 006H G 1/4" 63 0 - 25 E 670 007V G 1/4" 63 0 - 16 E 670 008V G 1/4" 63 0 - 25 E 670 009H G 1/4" 80 0 - 16 E 670 010H G 1/4" 80 0 - 25 E 670 011
1) H = horizontal q V G 1/4" 80 0 - 16 E 670 012 V = vertical w V G 1/4" 80 0 - 25 E 670 013
Accessories
Maintenance unit ¸ Consisting of a filter pressure reducer andmicro-filter
¸ Particularly suitable for spray booths, but alsofor foodstuff companies and the dental industry
¸ Completely assembled¸ Aluminium casing¸ Mist oiler with automatic condensate discharge
for discharging the micro-fine oil and wateraerosols and solid impurities with particles of upto 0.01 µm
¸ Colour indicator for monitoring the operationalreadiness
¸ Filter pressure reducer with automatic drainage¸ 50 mm Ø pressure gauge¸ Highest control accuracy thanks to lockable
fine tuning¸ Control range 0-12 bar.¸ Mass-produced with 40 µm filter element
Type Connection thread Air discharges Art. No.
3/8" WE-FDM/FF G 3/8” 2 x G 3/8” D 326 028
q
w
Order at the workstation is thenuts and bolts of every trade.Clutter in the workshop or onthe building site prevents effec-tive work. Schneider Druckluftruns a wide programme ofhoses, spiral hoses, hose rol-lers, springs and hose holders.The compressed air thereforegoes where it is needed. And ifnot, the compressed air hoseis quickly out of the way.
A large assortment of connec-tion parts, quick and safetycouplings also provide the rightcompressed air connection. Atdifferent workstations at thesame time when you want.
Compressed air accessories - everything that you otherwise still need.
Schneider Druckluft 53
54 Schneider Druckluft
● Creates order and prevents stumbling overhoses lying around
● Robust plastic model.Also suitable for heavy hoses.
Super Flex● Particularly resistant against oil-bearing com-
pressed air and aging resistant due to thestrengthened exterior material with wovenfabric inlay.
Oil / air with woven fabric inlay● Particularly resistant for oil-bearing
compressed air● Quick coupling with large air passageway.
Compressed air accessories
Compressed air hose with woven fabric inlay● For normal usage conditions for compressed air.● Tested by the TÜV (Technical Inspection Agency)1)
● Quick coupling with large air passageway.
● Colour: blue● Operating pressure at 20oC
Type Pressure External Internal Length with quick Art. No.max. Ø Ø coupling andbar mm mm m plug-in nipple
6 x 2.5 mm 1) 20 11 6 5 ● D 740 003
10 ● D 740 004
25 E 740 003
50 E 740 002
9 x 3 mm 1) 17 15 9 5 ● D 740 012
10 ● D 740 013
25 E 740 012
50 E 740 011
12.5 x 3 mm 15 18.5 12.5 10 ● D 750 021
25 E 740 022
50 E 740 021
Type Pressure External Internal Length with quick Art. No.max. Ø Ø coupling andbar mm mm m plug-in nipple
9 x 3 mm 20 15 9 10 ● D 740 040
25 E 740 042
● Colour: orange● Operating pressure at 20oC
● Quick coupling with large air passageway.● Very flexible, also at low temperatures● Colour: grey● Operating pressure at 20oC
Type Pressure External Internal Length with quick Art. No.max. Ø Ø coupling andbar mm mm m Plug-in nipple
6.3 x 2.35 mm 20 11 6.3 5 ● D 730 030
10 ● D 730 033
25 E 730 037
50 E 730 031
10 x 2.75 mm 20 15.5 10 5 ● D 730 032
10 ● D 730 031
25 E 730 0366
50 E 730 033
12.7 x 3.15 mm 20 19 12.7 25 E 730 024
50 E 730 023
19 x 4 mm 20 27 19 25 E 730 040
50 E 730 041
Wall-mounted hose holder
Type Art. No.
WSH E 104 002
● Additional hook for hanging uptools, small parts ....
Schneider Druckluft 55
Compressed air accessories
Spiral hose polyamide● With quick coupling and plug-in nozzle
1) pivoted● Colour: blue● Operating pressure at 20oC
Spiral hose polyurethane● Particularly wear-resistant and abrasion-resistant● Guaranteed not to leave scratches on paintwork.● No remaining cross-section strictures
due to snapping off
● Small coil diameter● Temperature range: -40 °C to +85 °C● With quick coupling and plug-in nozzle
(pivotable)
Type Press. External Internal Working Extended Connec- Art. No.
max. Ø Ø length length -tion
bar mm mm m m
9.5 x 1.6/6 m 8 10 6.5 4.8 6.0 R 1/4 D 770 136
9.5 x 1.6/7.5 m 8 10 6.5 7.5 6.0 R 1/4 D 770 137
12 x 2/6 m 8 12,0 8.0 4.8 6.0 R 3/8 D 770 138
12 x 2/7.5 m 8 12,0 8.0 6.0 7.5 R 3/8 D 770 139
Hose roller manual● With compressed air hose with woven fabric inlay● Connection hose with quick coupling and plug-in
nipple● Easy-to-use model with plastic drum
● Unrolling stop● Operating pressure at 20oC●●●●● SA 9 P mass-produced with wall-mounted
holder
Hose roller manualSA 9:● With compressed air hose with woven fabric inlay
and plug-in nipple.● Super Flex hose: very flexible, also at low
temperatures● Double distributor with 2 quick couplings● Can be unrolled either vertically or horizontally● With guide and hose holder● Unrolling stop● Operating pressure at 20oC
SA 10:● Particularly high air flow rate due to large
internal Ø: 10 mm.Thus practically no drop in pressure.
● The 360° pivotable base prevents overbalanc-ing when unwinding.
● Swivel joint on the air input hose● All round protection provided by a steel pipe
holder● Polyurethane compressed air hose● Retractable crank-handle● With quick coupling and plug-in nozzle.
Type Pressure External Internal Working Extended Art. No.
max. Ø Ø length length
bar mm mm m m
8 x 1/5 m 8 8 6 2.5 5 D 770 133
8 x 1/7.5 m 1) 8 8 6 4 7.5 D 770 131
10 x 1/10 m 1) 8 10 8 6 10 D 770 132
Type Pressure External Internal Length Weight Art. No.
max. Ø Ø
bar mm mm m kg
SA 9 q q q q q 20 15.5 10 20 4.3 D 312 530
SA 10 wwwww 15 14.5 10 20 7.2 D 312 540
Type Pressure External Internal Length Weight Art. No.
max. Ø Ø
bar mm mm m kg
SA 6 P qqqqq 15 12 6 15 3.5 D 312 508
SA 9 P wwwww 17 15 9 20 4.0 D 312 506
q
w
q
w
56 Schneider Druckluft
Traction ● For all types of portable devices and tools.● Small, with robust aluminium casing.
Traction with hose ● For all types of portable devices and tools of up to2.5 kg in weight.
● With 6 x 1mm PU hose.● Robust aluminium casing.
Supply unit/ Common features:● Ideal for workstations using compressed air and
current.● Wired up ready for operation● Working pressure of up to 15 bar● Air connection via 13 mm hose nozzle● Complete with 1.2 m hanging chain
automatic● With PU compressed air hose with woven fabric
inlay. Complete with quick coupling and connect-ion hose with plug-in nipple.
● Mass-produced with swivelling clamp holderand hose holding device.
Compressed air accessories
Hose roller
Type Pressure External Internal Extract. Weight Art. No.
max. Ø Ø length
bar mm mm m kg
SA 7 A qqqqq 12 10 6 7 +1.5 3.4 D 312 510
SA 9 A wwwww 15 13 8 15 +1 7.3 D 312 514
SA 10 A wwwww 12 13 8 10 +2 10.3 D 312 515
Type Load capacity Stroke lenght Weight Art. No.kg m kg
FZS 1 0.4 - 0.8 1.4 1.25 D 070 012
FZS 2 0.8 - 1.5 1.4 1.30 D 070 013
FZS 3 1.2 - 2.5 1.4 1.35 D 070 014
Type Art. No.
VE 1 4 16 A/230 V EURO moulded wall sockets on 2 alternatingcurrent electric circuits, two NW 7.2 quick couplings D 100 020
VE 2 q q q q q 3 16A / 230V EURO moulded wall sockets on 1 alternatingcurrent electric circuit, one 16A / 400V Cekon plug,2 NW 7.2 quick couplings D 100 025
VE 5 w w w w w 4 16A / 230V EURO moulded wall sockets on 2 alternatingcurrent electric circuits, two 16A/400V Cekon plugs on2 three-phase current electric circ., 2 NW 7.2 quick couplings D 100 027
VE 1 and VE 2:● Protection class IP 20● Weight: 1.7 kg
VE 5:● Protected from dirt and shower water in
accordance with IP 44 (authorized forwoodworking and similar industries)
● Weight: 2.9 kg
overhead multiplesockets unit
● Suitable for fastening to walls and ceilings,● SA 7 A and SA 9 A plastic casings,
SA 10 A aluminium casing.● Operating pressure at 20°C
● Operation pressure max. 8 bar at 50 °C.● Air flow rate: 370 l/min, difference in pressure: 0.5 bar.● Rubber stop in the end position.● Connection hose 0.4 m, R 1/4"a on both sides.
Type Load capacity Stroke lenght Weight Art. No.kg m kg
FZ 1 0.4 - 1.0 1.6 0.55 D 070 004
FZ 2 1.0 - 2.0 1.6 0.6 D 070 005
FZ 3 2.0 - 3.0 1.6 0.75 D 070 006
FZ 4 2.0 - 4.0 2.0 1.9 D 070 007
FZ 6 4.0 - 6.0 2.0 2.1 D 070 008
FZ 8 6.0 - 8.0 2.0 2.2 D 070 009
● Easily adjustable.● Wire output downwards.● Rubber stop in the end position.
q
w
qqqqq
w
Schneider Druckluft 57
Mini coupling system ● Brass model, NW 5● Areas of application: Measurement and control
technology, Laboratory technology, weldingtechnology as well as for smaller compressed airtools and spray guns
● Air outlet up to 530 l/min. at 6 bar,difference in pressure: 0.5 bar
● Working pressure max. 35 bar● Temperature-resistant: - 20 ° to +100°C.
Compressed air accessories
Mini quick coupling
Mini plug-in nozzle
Mini plug-in nipple
Type Art. No.
With external screw thread G 1/8"a, SW 14 E 032 101 G 1/4”a, SW 17 E 032 102
With interior screw thread
G 1/8”i, SW 14 E 032 131
G 1/4”i, SW 17 E 032 132
Type Art. No.
With nozzle for hose Ø 4 mm interior, SW 14 E 032 160 6 mm interior, SW 14 E 032 161 9 mm interior, SW 14 E 032 162 For plastic hose 4 x 1 mm, SW 14 E 032 142 6 x 1 mm, SW 14 E 032 143
Type Art. No.
With nozzle for hose Ø 4 mm internal E 032 360 6 mm internal E 032 361 9 mm internal E 032 362
Type Art. No.
For plastic hose 4 x 1 mm E 032 342 6 x 1 mm E 032 343
Type Art. No.
With external screw thread
G 1/8"a, SW 14 E 032 201
G 1/4”a, SW 17 E 032 202
Type Art. No.
With interior screw thread
G 1/8"i, SW 14 E 032 231
G 1/4”i, SW 17 E 032 232
58 Schneider Druckluft
Compressed air accessories
Security Industrial standard with automatic bleedingcouplings
Type Con- Art. No.tents
External screw thread G 1/4”, SW 14 1 E 033 222G 3/8", SW 17 1 E 033 223G 1/2", SW 22 1 E 033 224
Interior screw thread G 1/4”, SW 17 1 E 033 232G 3/8”, SW 19 1 E 033 233G 1/2”, SW 24 1 E 033 234
Plug-in nipple ● Hardened and nickel-plated steel● NW 7.8
Type Con- Art. No.tents
With nozzle for hose Ø 6 mm internal 1 E 033 3619 mm internal 1 E 033 36213 mm internal 1 E 033 363
Plug-in nozzle ● Hardened and nickel-plated steel● NW 7.8
Type Con- Art. No.tents
External screw thread G 1/4”, SW 24 1 E 036 905G 3/8”, SW 24 1 E 036 906G 1/2”, SW 24 1 E 036 907
Interior screw thread G 1/4”, SW 24 1 E 036 935G 3/8”, SW 24 1 E 036 936G 1/2”, SW 24 1 E 036 937
Nozzle for hose Ø 6 mm interior, SW 24 1 E 036 9649 mm interior, SW 24 1 E 036 96513 mm interior, SW 24 1 E 036 966
● Pressure of up to 15 bar● High air outlet of 1800 l/min.● Drop in pressure: 0.5 bar● Temperature range: - 20 °C to + 100 °C● Please comply with the following: In order to
guarantee safe operation, the security couplingsshould only be used in connection with hardenedsteel plugs.
● High security due to decoupling in two steps:After loosening the first interlock, automaticbleeding of the coupling takes place. Then, thesecond interlock can be loosened. Therefore, norisk of accidents, since the compressed air hosecan not be brought out of control.
● Brass model, nickel-plated● NW 7.8
Security quick couplings
Schneider Druckluft 59
Compressed air accessories
Quick coupling ● Brass model(Standard model) ● NW 7.2 for an air outlet of up to 1100 l/min. at 6 bar,
difference in pressure: 0.5 bar● Not susceptible to dirt due to the close
unlocking sleeve.
● Operation pressure max. 35 bar and roughvacuum.
● Oil-resistant perbunan seal.● Temperature-resistant: - 20 ° to + 100 °C.● Sealing on one side.● Silicon-free
without packaging with self-service packaging Ca
Type Con- Art. No. Con- Art. No.tents tents tents
With external screw thread
G 1/4”a, SW 22 1 E 700 001 1 E 701 001 20
G 3/8”a, SW 22 1 E 700 002 1 E 701 002 20
G 1/2”a, SW 22 1 E 700 003 1 E 701 003 20
With interior screw thread
G 1/4”i, SW 22 1 E 700 004 1 E 701 004 20
G 3/8”i, SW 22 1 E 700 005 1 E 701 005 20
G 1/2”i, SW 24 1 E 700 006 1 E 701 006 20
With nozzle for hose Ø
6 mm internal 1 E 700 007 1 E 701 007 20
9 mm internal 1 E 700 008 1 E 701 008 20
13 mm internal 1 E 700 209 1 E 701 009 20
For plastic hose
6 x 1 mm 1 E 031 143
9 x 1.5 mm 1 E 031 145
For plastic hoses, with offset protective coil
6 x 1 mm 1 E 031 153
9 x 1.5 mm 1 E 031 155
Distributor with ● Quick coupling in a brass model.● NW 7,2 for air outlet of up to 1100 l/min.
at 6 bar, difference in pressure 0,5 barquick couplings
without packaging with self-service packaging Ca
Type Con- Art. No. Con- Art. No. Con- G 3/8" i tents tents tents
with 2 couplings 1 E 700 120 1 E 701 020 6
with 3 couplings 1 E 700 121 1 E 701 021 6
Distributor withoutquick couplings
with 2 connections with 3 connections C
Type Con- Art. No. Con- Art. No.tents tents tents
G 3/8" 1 E 035 833 1 E 035 733
G 1/2" 1 E 035 834 1 E 035 734
● Large model, brass● With interior screw thread
● without packaging
60 Schneider Druckluft
Hose nozzle ● Brass model
Plug-in nipple ● Brass model, NW 7.2
Compressed air accessories
Plug-in nozzle ● Brass model, NW 7.2
without packaging with self-service packaging
Type Con- Art. No. Con- Art. No. Contents tents tent
With external screw thread G 1/8”, SW 14 1 E 031 201
G 1/4”, SW 14 1 E 700 213 1 E 701 013 25
G 3/8”, SW 22 1 E 700 214 1 E 701 014 25
G 1/2”, SW 22 1 E 700 215 1 E 701 015 25
With interior screw thread G 1/8”, SW 14 1 E 031 231
G 1/4”, SW 14 1 E 700 216 1 E 701 016 25
G 3/8”, SW 22 1 E 700 217 1 E 701 017 25
G 1/2”, SW 22 1 E 700 218 1 E 701 018 25
without packaging with self-service packaging
Type Con- Art. No. Con- Art. No.tents tents tents
With external screw thread G 1/8”x 4, SW 14 1 E 770 022
G 1/8”x 6, SW 14 1 E 770 023
G 1/4”x 4, SW 17 1 E 770 024
G 1/4”x 6, SW 17 1 E 770 225 1 E 771 025 25
G 1/4”x 9, SW 17 1 E 770 226 1 E 771 026 25
G 3/8”x 6, SW 19 1 E 770 227 25
G 3/8”x 9, SW 19 1 E 770 228 25
G 3/8”x 13, SW 19 1 E 770 229 25
G 1/2”x 6, SW 24 1 E 770 230 25
G 1/2”x 9, SW 24 1 E 770 231 1 E 771 031 25
G 1/2”x 13, SW 24 1 E 770 232 1 E 771 032 25
G 3/4”x 13, SW 32 1 E 770 033
G 3/4”x 19, SW 32 1 E 770 034
With interior screw thread G 1/4”x 4, SW 17 1 E 770 039
G 1/4”x 6, SW 17 1 E 770 235 25
G 1/4”x 9, SW 17 1 E 770 236 25
G 3/8”x 6, SW 19 1 E 770 237 25
G 3/8”x 9, SW 19 1 E 770 238 25
G 1/2”x 6, SW 24 1 E 770 240 25
G 1/2”x 9, SW 24 1 E 770 241 25
G 1/2”x 13, SW 24 1 E 770 242 25
without packaging with self-service packaging
Type Con- Art. No. Con- Art. No. Con-tents tents tents
For hose Ø
4 mm internal 1 E 031 360
6 mm internal 1 E 700 010 1 E 701 010
9 mm internal 1 E 700 011 1 E 701 011
13 mm internal 1 E 700 212 1 E 701 012
For plastic hose 4 x 1 mm 1 E 031 342
6 x 1 mm 1 E 031 343
9 x 1.5 mm 1 E 031 345
For plastic hoses, with offset protective coil
6 x 1 mm 1 E 031 353
9 x 1.5 mm 1 E 031 355
Schneider Druckluft 61
without packaging with self-service packaging C
For hose Ø Con- Art. No. Con Art. No. Con-tents tents tents
11 - 13 mm 1 E 770 210 5 E 771 110 50
13 - 15 mm 1 E 770 211 5 E 771 111 50
15 - 17 mm 1 E 770 212 5 E 771 112 50
without packaging with self-service packaging C
For hose Ø Con- Art. No. Con- Art. No. Con-tents tents tents
8 - 12 mm 1 E 131 012
10 - 16 mm 1 E 770 215 5 E 771 115 50
12 - 20 mm 1 E 770 216 5 E 771 116 50
16 - 25 mm 1 E 770 217 5 E 771 117
20 - 32 mm 1 E 770 218 5 E 771 118
25 - 40 mm 1 E 131 040
32 - 50 mm 1 E 131 050
40 - 60 mm 1 E 131 060
50 - 70 mm 1 E 131 070
60 - 80 mm 1 E 131 080
70 - 90 mm 1 E 131 090
80 - 100 mm 1 E 131 100
90 - 110 mm 1 E 131 110
100 - 120 mm 1 E 131 120
110 - 130 mm 1 E 131 130
120 - 140 mm 1 E 131 140
130 - 150 mm 1 E 131 150
without packaging with self-service packaging C
Type Con- Art. No. Con- Art. No. Con-tents tents tents
Galvanized steel, with interior cone
R 1/4” x R 1/4” 1 E 770 256 1 E 771 056 10
R 3/8” x R 3/8” 1 E 770 258 1 E 771 058 10
R 1/2” x R 1/2” 1 E 770 260 1 E 771 060 10
R 1/8” x R 1/4” 1 E 770 255 1 E 771 055
R 1/4” x R 3/8” 1 E 770 257 1 E 771 057 10
R 1/4” x R 1/2” 1 E 770 288 1 E 771 088
R 3/8” x R 1/2” 1 E 770 259 1 E 771 059 10
Malleable cast iron
R 1/2” x R 1/2” 1 G 230 025
R 3/4” x R 3/4” 1 G 230 028
R 1” x R 1” 1 G 230 026
R 1 1/4” x R 1 1/4” 1 G 230 027
R 1 1/2” x R 1 1/2” 1 G 004 057
R 1/2” x R 3/4” 1 G 230 106
R 1/2” x R 1” 1 G 004 062
R 3/4” x R 1” 1 G 004 030
R 1” x R 1 1/4” 1 G 230 101
R 1 1/4” x R 1 1/2” 1 G 004 096
Carton on the shop shelf
n- Art. No. Price Ets
E 700 013 62,50 71,88
E 700 014 62,50 71,88
E 700 015 115,– 132,25
E 700 016 70,– 80,50
E 700 017 70,– 80,50
E 700 018 110,– 126,50
Carton on the shop shelf
Con- Art. No.
E 770 025 62.50 71.88
E 770 026 62.50 71.88
E 770 027 72.50 83.38
E 770 028 72.50 83.38
E 770 029 87.50 100.63
E 770 030 130.00 149.50
E 770 031 140.00 161.00
E 770 032 140.00 161.00
E 770 035 72.50 83.38
E 770 036 72.50 83.38
E 770 037 85.00 97.75
E 770 038 85.00 97.75
E 770 040 157.50 181.13
E 770,041 157.50 181.13
E 770,042 157.50 181.13
Carton on the shop shelf
Art. No.
Compressed air accessories
Hose clamp ● Steel model, glossy zinc-platedwith 2 profile ears
● Range: 7 mm
Screw clamp ● Steel model, glossy zinc-plated● Screw thread for SW 7mm cross-slot screws● Range: 9 mm
Double nipple
62 Schneider Druckluft
Compressed air accessories
Double nipple
without packaging with self-service packaging
For hose Ø Con- Art. No. Con- Art. No. Con-tents tents tents
4 mm internal 1 E 770 049
6 mm internal 1 E 770 250 1 E 771 050 10
9 mm internal 1 E 770 251 1 E 771 051 10
13 mm internal 1 E 770 052
Hose coupling ● Brass model
without packaging with self-service packaging
Type Con- Art. No. Con- Art. No. Price E Con-tents tents A) B) tents
Brass, with interior cone
G 1/8” x G 1/8” 1 E 030 111
G 1/4” x G 1/4” 1 E 030 122
G 3/8” x G 3/8” 1 E 030 133
G 1/2” x G 1/2” 1 E 030 144
G 3/4” x G 3/4” 1 E 030 155
G 1” x G 1” 1 E 030 166
G 1/8” x G 1/4” 1 E 030 112
G 1/8” x G 3/8” 1 E 030 113
G 1/4” x G 3/8” 1 E 030 123
G 1/4” x G 1/2” 1 E 030 124
G 3/8” x G 1/2” 1 E 030 134
G 3/8” x G 3/4” 1 E 030 135
G 1/2” x G 3/4” 1 E 030 145
G 1/2” x G 1” 1 E 030 146
G 3/4” x G 1” 1 E 030 156
Brass, with conic thread
R 1/8” x R 1/8” 1 E 030 011
R 1/4” x R 1/4” 1 E 030 022
R 3/8” x R 3/8” 1 E 030 033
R 1/2” x R 1/2” 1 E 030 044
R 1 1/4” x R 1 1/4” 1 G 004 122
R 1 1/2” x R 1 1/2” 1 G 004 123
R 2” x R 2” 1 G 004 156
Brass, soluble, conic seal
R 1/8” x R 1/8” 1 E 030 048
R 1/4” x R 1/4” 1 E 030 052
R 3/8” x R 3/8” 1 E 030 054
R 1/2” x R 1/2” 1 E 030 055
R 3/4” x R 3/4” 1 E 030 056
R 1” x R 1” 1 E 030 057
R 1/8” x R 1/4” 1 E 030 049
R 1/4” x R 3/8” 1 E 030 053
Nickel-plated, with cylindrical external screw thread
G 1/8” x G 1/8” 1 E 041 111
G 1/4” x G 1/4” 1 E 041 122
G 3/8” x G 3/8” 1 E 041 133
G 1/2” x G 1/2” 1 E 041 144
G 3/4” x G 3/4” 1 E 041 155
G 1/8” x G 1/4” 1 E 041 112
G 1/8” x G 3/8” 1 E 041 113
G 1/4” x G 3/8” 1 E 041 123
G 1/4” x G 1/2” 1 E 041 124
G 3/8” x G 1/2” 1 E 041 134
G 1/2” x G 3/4” 1 E 041 145
Schneider Druckluft 63
Carton on the shop shelf
Art. No. Price EA) B)
E 770 050 28.– 32.20
E 770 051 32.– 36.80
Carton on the shop shelf
- Art. No. Price Es A) B)
Type Art. No. Con- Art. No. Price E Con-tents A) B) tents
G 1/8”a x R 1/8”i E 023 411
G 1/4”i x R 1/4”i E 023 422
G 3/8”a x R 3/8”i E 023 433
Compressed air accessories
Reducer● Brass model● With interior and exterior
screw threads
Reducing nipple● With interior and exterior
screw threads
Pivotable nipple● Nickel-plated
without packaging with self-service packaging C
Type Con- Art. No. Con- Art. No. Cotents tents tents A)
Brass
G 1/4”a x G 1/8”i 1 E 770 265
G 3/8”a x G 1/8”i 1 E 770 061
G 3/8”a x G 1/4”i 1 E 770 266 1 E 771 066
G 1/2”a x G 1/8”i 1 E 770 062
G 1/2”i x G 1/4”i 1 E 770 063
G 1/2”a x G 3/8”i 1 E 770 267 1 E 771 067
G 3/4”a x G 3/8”i 1 E 770 064
G 3/4”a x G 1/2”i 1 E 770 077
G 1”a x G 1/2”i 1 E 770 078
G 1”a x G 3/4”i 1 E 770 079
1 1/4”a x G 1/2”i 1 E 770 095
1 1/4”a x G 3/4”i 1 E 770 096
1 1/2” x G 1” 1 E 770 093
2” x G 1” 1 E 770 094
Nickel-plated, external conic-shaped screw thread, internal cylindrical screw thread
R 1/4”a x G 1/8”i 1 E 041 221
R 3/8”a x G 1/4”i 1 E 041 232
R 1/2”a x G 3/8”i 1 E 041 243
R 3/4”a x G 1/2”i 1 E 041 254
without packaging with self-service packaging C
Type Con- Art. No. Con- Art. No. Con-tents tents tents
Brass
G 1/8”a x G 1/8”i 1 E 770 080
G 1/8”a x G 1/4”i 1 E 770 081
G 1/4”i x G 1/8”i 1 E 770 082
G 1/4”i x G 1/4”i 1 E 770 083
G 1/4”a x G 3/8”i 1 E 770 268 1 E 771 068
G 3/8”a x G 1/4”i 1 E 770 084
G 3/8”a x G 3/8”i 1 E 770 085
G 3/8”a x G 1/2”i 1 E 770 269 1 E 771 069
G 1/2”a x G 3/8”i 1 E 770 086
G 1/2”a x G 1/2”i 1 E 770 087
G 1/2”a x G 3/4”i 1 E 770 275
Nickel-plated, exterior cylindrical screw thread
G 1/4”a x G 1/8”i 1 E 041 312
G 3/8”a x G 1/4”i 1 E 041 323
G 1/2”a x G 3/8”i 1 E 041 334
Malleable cast iron
G 1”i x G 1/2”i 1 G 017 010
G 1”i x G 1/2”a 1 G 017 088
G 1 1/4”i x G 3/4”i 1 G 017 011
64 Schneider Druckluft
without packaging with self-service packaging
Type Con- Art. No. Con- Art. No. Price E Con-tents tents A) B) tents
Brass, with interior hexagonal bolt
G 1/8”a 1 E 030 510
G 1/4”a 1 E 030 520
G 3/8”a 1 E 030 530
G 1/2”a 1 E 030 540
G 3/4”a 1 E 030 550
Brass, with interior hexagonal bolt, conic-shaped, knurled screw thread
R 1/8”a 1 E 030 501
R 1/4”a 1 E 030 502
R 3/8”a 1 E 030 503
Nickel-plated, hexagonal bolt
G 1/8”a 1 E 041 510
G 1/4”a 1 E 041 520
G 3/8”a 1 E 041 530
G 1/2”a 1 E 041 540
Steel, with interior hexagonal bolt, conic-shaped, knurled screw thread
R 1/2”a 1 G 205 208
R 3/4”a 1 G 205 216
Compressed air accessories
Sleeves ● Brass model
without packaging with self-service packaging
Type Con- Art. No. Con- Art. No. Con-tents tents tents
Brass
G 1/8”i 1 E 770 076
G 1/4”i 1 E 770 270
G 3/8”a 1 E 770 271 1 E 771 071
G 1/2”i 1 E 770 272 1 E 771 072
G 3/4”i 1 E 770 073
G 1”i 1 E 770 074
Nickel-plated
G 1/8”i 1 E 041 411
G 1/4”i 1 E 041 422
G 3/8”a 1 E 041 433
G 1/2”i 1 E 041 444
Locking screw ● Steel, yellow chrome-plated● Interior hexagonal bolt
Packaging Con- Art. No.unit tents
Loctite 243 bolt retaining device q 1 50 ml E 771 135for sealing and securing metal 1 5 mg E 771 126screws for medium loads
Reel of sealing tape (PTFE) w 1 12 m E 771 125
12 mm wide, 0.1mm thick 10 12 m E 770 125
Leak detector spray e 1 125 ml E 770 128For finding micro-fine leakage pointsin compressed air installations. FCKW-free.
self-packaged articlesfor the shop shelf
Consumable material
qw e
Schneider Druckluft 65
Type Art. No.
Brass, 2 interior threads, large model
G 1/8” E 039 135
G 1/4” E 039 137
G 3/8” E 039 139
G 1/2” E 039 141
G 3/4” E 039 143
G 1” E 039 145
G 1 1/4” E 039 147
G 1 1/2” E 039 149
G 2” E 039 151
Type Art. No.
Nickel-plated brass, 2 interior threads
G1/8 E 041 711
G1/4 E 041 722
G3/8 E 041 733
G1/2 E 041 744
Type Art. No.
Brass, 3 ext. threads, with an interior cone
R 1/8” E 030 811
R 1/4” E 030 822
R 3/8” E 030 833
R 1/2” E 030 844
Nickel-plated brass, 3 ext. screw threads
R 1/8” E 041 811
R 1/4” E 041 822
R 3/8” E 041 833
R 1/2” E 041 844
Type Art. No.
Nickel-plated brass, 1 ext. and 2 int. threads
R 1/8” E 041 911
R 1/4” E 041 922
R 3/8” E 041 933
R 1/2” E 041 944
Nickel-plated brass, 3 interior threads
G 1/8” E 042 111
G 1/4” E 042 122
G 3/8” E 042 133
G 1/2” E 042 144
Cross-piece● Aluminium● 4 interior threads
Type Art. No.
G 1/8”i E 023 311
G 1/4"i E 023 322
Type Art. No.
G 3/8”i E 023 333
G 1/2"i E 023 344
Carton on the shop shelf
- Art. No. Price Es A) B)
Carton on the shop shelf
- Art. No. Price Es A) B)
T pieces
Type Art. No.
Brass, 3 interior threads, large model
G 1/8” E 039 008
G 1/4” E 039 010
G 3/8” E 039 012
G 1/2” E 039 014
G 3/4” E 039 016
G 1” E 039 018
G 1 1/4” E 039 020
G 1 1/2” E 039 022
G 2” E 039 024
Cross-piece● Nickel-plated brass● 1 ext. and 3 int. threads
Y pieces
Compressed air accessories
Angle pieces
Type Art. No.
Brass, 2 ext. threads, with an interior cone
R 1/8” E 030 611
R 1/4” E 030 622
R 3/8” E 030 633
R 1/2” E 030 644
Nickel-plated brass. 1 int. and 1 ext. threads
R1/8-G1/8 E 041 611
R1/4-G1/4 E 041 622
R3/8-G3/8 E 041 633
R1/2-G1/2 E 041 644
Type Art. No.
Nickel-plated brass , 1 ext. and 2 int. threads
R 1/8” E 042 211
R 1/4” E 042 222
R 3/8” E 042 233
R 1/2” E 042 244
Type Art. No.
Nickel-plated brass, 3 int. threads
G 1/8” E 042 591
G 1/4” E 042 592
G 3/8” E 042 593
G 1/2” E 042 594
Type Art. No.
R1/8-3xG1/8 E 042 311
R1/4-3xG1/4 E 042 322
R3/8-3xG3/8 E 042 333
With our frequently testedcompressed air tools, you willwork professionally - whetherin rigorous trade and assemblyworkshops or at home. Faithfulto our motto: the easiest ope-ration, the best work results!
What you should take into accountwhen choosing a tool:
Air requirementIs the filling performance ofyour compressor sufficient forthe desired tool?
Working areaWhich work should be carriedout with the tool? What spaceis available at the usage site?
Duration of useHow strongly should the toolbe put under stress - onlyoccasionally or in continuousoperation?
EquipmentWith which functions shouldthe tool be equipped? Whichmaterial should be worked ?
Sound advice is important to us.We shall be pleased to adviseyou in the choice of the appro-priate compressed air tool foryou - you will find the contactaddresses on the back page ofthis catalogue. Or you can askyour competent specialist dea-ler to come on-site.
Transport or building site packa-ging?Look for this pictogram in thecatalogue.Our tools are mass-producedand delivered
in a case
in a systainer
Schneider Druckluft compressed air tools -the appropriate specialists for each application.
Schneider Druckluft66
For professional work in theautomobile industry (cars,HGVs, motorcycles) and onassembly lines. In all perfor-mance classes, for the variousareas of use, in the most diver-se models - partly soundproo-fed, therefore particularly quiet.Everything's there!
Impact screwdrivers and ratchet screwdriversA programme in search of its equal.
Schneider Druckluft68
Schneider Druckluft 69
Multi Set ● Technical data such as that for the 1/2” impact1/2” impact screwdriver (Art. No. D 327 347, see above) andand ratchet ratchet screwdriver 1/2” (Art. No. D 322 270, seescrewdriver page 71)
Impact screwdriver
3/8” Impact screwdriver ● For use on assembly lines or in repair workshops● Change in direction of rotation to the right / left with
one-handed use● A hammer striking mechanism
Type Holder Air- Working Working Loosen- Weight Art. No.need press- area ing/
ure Torque] l/s bar up to Nm kg
HW 135 B-L 3/8” 3.4 6.3 M 12 120 1.3 D 322 605
● Included in the delivery: In a plastic case with10 nuts (10 to 13, 15, 17, 19, 22, 24, 27 mm)
1/2” Impact screwdriver ● Hammer striking mechanism
Holder/ Air Working Working Loosening-/ Weight Art. No.Type need pressure area Torque
] l/s bar up to Nm kg
1/2” set 6 6 M 14 345 2.2 D 327 347
1/2” Impact screwdriver ● Robust impact screwdriver with roll strikingmechanism for extra hard areas of use
● For tightening and loosening screws in the auto-mobile industry and when working on assemblylines.
● Change in the direction of rotation to the right /left with one-handed use
● Adapting of the tightening torque by the adjust-able air supply
● Increased tightening torque when in left-handmotion
● Reduced health risk due to reversed outgoingair
● Simple operation and tire-free work due to itscompact design, low weight and vibrationskept to a minimum
1/2” Impact screwdriver ● For tightening and loosening screwssoundproofed in the automobile and agriculture industries
● Well suited to work on assembly lines due to thelow noise level
● Robust, long-lasting roller striking mechanism● Change in the direction of rotation to the right / left
with one-handed
1/2” Impact screwdriver ● For the automobile industries and assembly lines● With a two-ring hammer striking mechanism, a
rotary air connection with silencer downwards● Change in the direction of rotation to the right/left
Type Holder Air- Working Working Loosening/ Weight Art. No.need press- area Torque
ure] l/s bar up to Nm kg
HW 141 1/2” 6 6.3 M 16 400 2.3 D 327 400
Type Holder Air- Working Working Loosening/ Weight Art. No.need press- area Torque
ure] l/s bar up to Nm kg
HW 304 L 1/2” 6 6.3 M 16 570 2.8 D 322 613
Type Holder Air- Working Working Loosening/ Weight Art. No.need press- area Torque
ure] l/s bar up to Nm kg
HW 140 L 1/2” 7 6.3 M 18 650 2.7 D 322 609
● Tightening torque can be set on 3 levels● No dust dispersion and low health risk from
the outgoing air hose● Tire-free work and vibrations kept to a
minimum
● Simple operation and tire-free work thanks tothe compact design, the low weight and anergonomically formed handle
● Adapting the tightening torque by adjustable airsupply
● Adjustment of the tightening torque over4 levels
● Adjustable air supply● Insulated handle
● Included in the delivery: 1/2” impact screw-driver and 1/2” screwdriver with 10 nuts (10 to13, 15, 17, 19, 22, 24, 27 mm) in the plasticcase
Type Art. No.
Multi Set D 327 348
70 Schneider Druckluft
Impact screwdriver
3/4” Impact screwdrivers ● For tyre changes on light vans and light HGVs aswell as for agriculture
● Adapting of the tightening torque by separatelyadjustable hammering action for loosening andtightening over 6 levels
● Change in the direction of rotation to the right/left
Type Holder Air- Working Working Loosening/ Weight Art. No.need press- area Torque
ure] l/s bar up to Nm kg
HW 156 TR-L 3/4” 7.5 6.3 M 22 1290 5.3 D 322 616
1” Impact screwdriver ● For tyre changes on small HGVs and light vans inforwarding agencies and omnibus companies. Butalso for agriculture and steel construction
● Adapting of the tightening torque by separatelyadjustable hammering action for loosening andtightening over 6 levels
● Length of drive screw: 90 mm
Type Holder Air- Working Working Loosening/ Weight Art. No.need press- area Torque
ure] l/s bar up to Nm kg
HW 187 PTR-L 1” 7.5 6.3 M 24 1290 5.7 D 322 621
● Robust, long-lasting roller striking mechanism● No dispersion of the brake dust thanks to air
discharge via handle downwards● Longer device service life thanks to an air
input with dirt sieve
● Robust, long-lasting roller striking mechanism● No dispersion of the brake dust thanks to air
discharge via handle downwards● Longer device service life thanks to an air
input with dirt sieve● Change in the direction of rotation to the right/
left
1” Impact screwdriver ● For bus companies, forwarding agencies,agriculture and industry
● Robust, long-lasting roller striking mechanism● Only an adjusting wheel for switching between
right-hand motion and left-hand motion andtightening torque adjustment. Thus, the easiestoperation
Type Holder Air- Working Working Loosening/ Weight Art. No.need press- area torque
ure] l/s bar up to Nm kg
HW 273 L 1” 11 6.3 M 30 2150 8.6 D 322 622
● Extremely low weight relieves the operation● Low working spindle for problem-free work
also for twin tyres● Rubber protection prevents damage to rims,
etc.● Mass-produced with an additional handle
3/4” Impact screwdriver ● Roller striking mechanism● Change in the direction of rotation to the right/left
Holder/ Air Working Working Loosening-/ Weight Art. No.Type need pressure area Torque
] l/s bar up to Nm kg
3/4” 7.2 6.3 M 22 950 4.8 D 327 346
Schneider Druckluft 71
Ratchet screwdriver
1/4” Ratchet screwdriver ● Small, very handy ratchet screwdriver for workon awkward places for example: in the enginecompartment or on motorbikes
Type Holder Air- Working Rotary Weight Loosening- Art. No.need pressure speed / Torque
] l/min. bar min-1 kg Nm
HW 760 A 1/4” 210 6.3 310 0.5 33 D 322 590
● Right-hand motion / left-hand motion
1/2” Ratchet screwdriver ● For awkward places, e.g. engine compartment● Right-hand motion / left-hand motion
Holder Air req. Work. press. Rot.speed Weight Loosening / Art. No.] l/min. bar min-1 kg Torque Nm
1/2” set 310 6.3 110 1.2 40 D 322 270
Set of nuts for impact ● Chrome / Vanadium model,and ratchet screwdrivers from 1/2”, extra strengthened for compressed air
tools
1/2” Ratchet screwdriver ● Particularly efficient● For applications in the automobile industry (for-
warding agencies, bus companies), in agricultureand on assembly lines
● Well suited to awkward places because of itsslim, handy form
● With a roller striking mechanism for looseningand tightening stiff screws
Type Quantity Size of the nuts Art. No.nuts (hexagonal bolt)
3/8” 8 8, 10, 11, 12, 13, 14, 17, 19 D 322 275
1/2” 10 11, 12, 13, 14, 15, 17, 19, 21, 22, 24 D 322 268
1/2” 2 17, 19 (extended model, 78 mm long) D 322 292
3/4” 8 26, 27, 29, 30, 32, 35, 36, 38 D 322 276
1” 7 24, 27, 30, 32, 35, 36, 38 D 322 278
Type Holder Air- Working Rotary Weight Loosening/ Art. No.need pressure speed Torque
] l/min. bar min-1 kg Nm
HW 176 B L 1/2” 200 6.3 280 1.5 100 D 322 602
● Adjustment of the direction of rotation to theright / left in the ratchet head
● Adapting of the tightening torque thanks to acontinuously adjustable tightening handle
● Longer device service life thanks to an airinput with dirt sieve
Type Holder Air- Working Rotary Weight Loosening/ Art. No.need pressure speed Torque
] l/min. bar min-1 kg Nm
HW 134 L 1/2” 235 6.3 170 1.2 70 D 322 603
1/2” Ratchet screwdriver ● For applications in the automobile industry(forwarding agencies, bus companies), in agri-culture and on assembly lines
● Well suited to awkward places due to its slim,handy form
● Adjustment of the direction of rotation to theright / left in the ratchet head
● Very efficient with its double drive in theratchet head
● Scratch protection of the rubberised ratchethead
● Included in the delivery: In a plastic case with7 nuts (10-13, 15, 17, 19 mm), 3 screw bits,1 holder for screw bits, 1 joint, 1 extension of75 mm
Different chisel hammers - fordiverse areas of application:Renovation of buildings (oldand new buildings), removal ofcracked exterior plaster, remo-val of tiles, creating of slots forlaying electrical conductors"under the plaster", cutting ofsheet metal... Everything withcompressed air - there is nolighter, more reliable and moreeconomical!
Chisel hammersThe absolute hammer.
Schneider Druckluft72
Schneider Druckluft 73
Chisel hammers
Chisel hammer ● Light and handy chisel hammer with low airconsumption
● The horizontal bolt holder prevents twisting of thechisel
● For removing tiles and plaster, for wallbreakthroughs, for cutting sheet metal and evenfor removing bolts
● Included in the delivery:125 mm sheet metal separating chisel 125 mm,130 mm bolt-removing chisel, 125 mm holechisel, 185 mm four-sided chisel, 175 mm flatchisel, fast tension spring, plastic case
Type Holder Air- Working Number Stroke Weight Art. No.need press. impacts length
mm l/min. bar min-1 mm kg
DIY Enthusiast set 10 220 4 - 6 4500 41 1.1 D 322 255
Chisel hammer ● Ideal for working on bricks, aerated concrete,brickwork, but also for metal and sheet metalworking such as fitting repair sheet metal ontocars, detaching mudguards, removing rustyscrews.
● Included in the delivery:185 mm four-sided chisel, 175 mm flat chisel,175 mm sheet metal separating chisel, 180 mmsheet metal cutting chisel, 175 mm bolt-removing chisel, Plastic case
Type Holder Air- Working Number Stroke Weight Art. No.need press. impacts length
mm l/min. bar min-1 mm kg
MHM-Set 10 150-240 4 - 6 3000 65 1.5 D 322 254
Cross-slot holding cap B 323 029
Fast tension spring for replacement requirement B 322 249
Needle remover Attachment for derusting with 19 steel needles B 322 270
Replacement needles for the needle remover B 322 271
Accessoires for Art. No. D 322 254 and D 322 255
Type Holder Air- Working Number Stroke Weight Art. No.need press. impacts length
mm l/min. bar min-1 mm kg
Motor vehicles 10 220 4-6 4500 41 1.2 D 322 256
Accessories
Fast tension spring for replacement requirement B 322 249
Needle remover Attachment for derusting with 19 steel needles B 322 270
Replacement needles for the needle remover B 322 271
Chisel hammer ● Strong and handy chisel hammer● For small improvements to concrete, for removing
tiles and plaster, chipping ....● Now new: with a cross-slot holding cap
Type Holder Air- Working Number Stroke Weight Art. No.need press. impacts length
mm l/min. bar min-1 mm kg
3L renovator 10 280 4-6 3000 65 1.6 D 322 248
Accessories
Fast tension spring until year of manufacture 2000 B 322 351
Cross-slot holding cap B 323 029
Chisel hammer ● Included in the delivery:125 mm sheet metal separating chisel, 130 mmsheet metal cutting chisel, 125 mm hole chisel,180 mm bent flat chisel for bolts, plastic case
● Included in the delivery:200 mm four-sided chisel, 180 mm bent widechisel, 180 mm flat chisel, cross-slot holdingcap, protective goggles, metal case.
74 Schneider Druckluft
Chisel hammers
Chisel hammer ● High striking power at low weights● Ideal for removing plaster, hitting slots● with a cross-slot holding cap
Type Holder Air- Working Number Stroke Weight Art. No.need press. impacts length
mm l/min. bar min-1 mm kg
MMH 10 10 280 6.3 3000 45 1.5 D 323 002
Cross-slot holding cap G 408 579
1) particularly for exterior plaster and for removing tiles2) slightly bent for improved guidance for slot work in brickwork, pumice, red bricks, aerated concrete ...3) total length x width
Chisel hammer ● Extensive attenuation measures prevent mostvibrations and thus protect the joints used by theuser
● Continuous adaptation of the striking performance tovarious materials via the air control valve
● High security thanks to the automatic contact - thedevice is only switched on when the chisel is placedon the brickwork
● Cold insulation provided by the rubberisedhandle
● Included in the delivery:200 mm four-sided chisel, 180 mm bentwide chisel, 180 mm flat chisel, cross-slotholding cap, protective goggles, metal case
Type Holder Air- Working Number Stroke Weight Art. No.need press. impacts length
mm l/min. bar min-1 mm kg
MHV 190 Vibrastop 10 340 7 3200 65 1.7 D 322 359
Cross-slot holding cap B 323 029
● Included in the delivery:180 mm four-sided chisel, 180 mm flatchisel
Standard model from high-alloyed tool steel
Dim. 3) Art.-No. Dim. 3) Art. No.mm mm
Four-sided chisel 200x12 B 322 255 180x12 B 322 372
Four-sided chisel 350x12 B 322 254 250x12 B 322 374
Flat chisel 180x20 B 322 256
Flat chisel 250x20 B 322 253 250x12 B 322 370
Straight wide chisel 180x50 B 322 258 200x50 B 322 373
Bent wide chisel 1) 180x50 B 322 260
Sheet metal cutting chisel 135x18 B 322 363
Groove chisel 2) 210x23 B 322 259
Chisel suitable for chisel hammers:with a 10mm horizontal bolt DIY enthusiasts, MHM set, motor vehicles , 3L renovator, MMH 10, MHV 190
Schneider Druckluft 75
Chisel hammer ● For removing plaster and tiles, removing bitumensurfacing or floor coverings
● Variable length from 500 mm to 1820 mm can bescrewed together for use on walls or on the floor
● In a handy transport case
● Quick change chucks allow the the chisel tobe changed quickly
● Low air consumption, can therefore also beused with smaller compressors
● Mass-produced with 3 extension pipes(length: 2 x 500 mm/1 x 320 mm, weight2.1 kg) and 4 chisels
Type Air- Working Number Weight Art. No.need pressure impactsl/min. bar min-1 kg
SMH-SW 180-200 6.3 2200 4.0 D 322 355
Chisel Type Dimensions 1) Art. No.mm
bent 230x40 B 322 480
straight 225x50 B 322 481
straight 210x70 B 322 482
straight 235x100 B 322 483
bent 250x120 B 322 484
Chisel hammer ● Light chisel hammer with enormous striking power● For slotting and caulking work● High wear resistance also for continuous
operation
Type Holder Air- Working Number Stroke Weight Art. No.need press. impacts length
mm l/min. bar min-1 mm kg
SMH 19 12 320 7 2400 60 3.2 D 323 000
● Included in the delivery:195 mm four-sided chisel, 250 mm flat chisel
Chisel for SMH 19with a 12 mm horizontal boltfrom high-alloyed tool steel
Dim. 1) Art. No.mm
Four-sided chisel 190x20 B 323 004
Four-sided chisel 270x20 B 323 005
Flat chisel 190x20 B 323 001
Flat chisel 270x20 B 323 002
Wide chisel 255x50 B 323 010
Wide chisel 265x95 B 323 011
Cross-slot holding cap B 323 018
(required for flat, hollow joint and wide chisels)
Chisel hammer ● Robust chisel hammer for demolition and caulkingwork.
● High wear resistance also for continuousoperation
● 3/4" compressed air connection withconnection hose
● With closed holding cap
Type Holder Air- Working Number Stroke Weight Art. No.need press. impacts length
mm l/min. bar min-1 mm kg
SMH 55/C 17 15 550 7 2400 55 6.1 D 323 015
Chisel for SMH 55with 15mm horizontal bolt
Chisel hammers
Dim. 1) Art. No.mm
Four-sided chisel 270x20 B 322 472
Flat chisel 270x20 B 322 471
Wide chisel 270x95 B 322 473
Cross-slot holding cap (for flat and wide chisels) B 323 019
1) Total length x width
Tools in soundproofed versionsand with dirt suction. Modelswith grinding disc and Velcrofacing for easy changing of theabrasive paper... Short andgood: Everything for all imagin-able jobs in the automobile,painting and wood industries.What more would you want?
Grinding machinesAlmost faultless.
Schneider Druckluft76
Schneider Druckluft 77
Grinding machines
Eccentric grinder ● With connection for dust suction● Grinding disc with Velcro and 6 holes
Type Air- Working Grinding Rotary Stroke Weight Art. No.need pressure disc speedl/min. bar Ø mm min-1 mm kg
HW 148 q 300 6.3 150 11000 8 2.0 D 322 702
HW 150-5 w 300 6.3 150 9000 5 1.5 D 322 703
Replacement grinding disc for HW 148 with Velcro, 6 holes B 322 702
Replacement grinding disc for HW 148 with Velcro, 8 holes B 322 703
Replacement grinding disc for HW 150-5 with Velcro, 6 holes B 322 705
● HW 150-5 light, handy device for one-handeduse
Rod grinder ● For deburring, sanding, milling ...● With safety lever to prevent unintentional
switch on
● Included in the delivery: For 1 pair of weldingtongs 6 and 3 mm, every 5 mounted pointswith 6 and 3 mm shaft (Fig. q), plastic case
Superfinisher ● Large and powerful device● Areas of application: Metal, furniture and aviation
industries
● With connection for dust suction● Grinding disc with Velcro● Mass-produced additionally with clamping
yokes for abrasive paper for tightening
Type Air- Working Grinding Oscill- Stroke Weight Art. No.need pressure disc ationsl/min. bar mm min-1 mm kg
HW 220 300 5 - 7 115x220 11000 5 2.7 D 322 707
Grinding disc 115 x 220 mm with clamp and Velcro G 401 679
Rod grinder ● For deburring, sanding, milling ...● With safety lever to prevent unintentional
Switch on
● Mass-produced with 6 mm welding tongs● No dust dispersion as the outlet air is directed
backwards
Type Air requirem. Working press. Rotary speed Weight Art. No.l/min. bar min-1 kg
HW 1031 L 300 7 22000 0.6 D 322 654
Type Air requirem. Working press. Rotary speed Weight Art. No.l/min. bar min-1 kg
Standard set 250-340 6.3 22000 0.6 D 322 301
Mounted points For every 5 parts with 6 and 3 mm shaft B 322 525
Grinding cylind. Per Ø (9, 12, 18 and 25 mm) for 1 cylinder (6 mm shaft)
and 1 abrasive sleeve. B 322 500
Type Dia- Art. No. Dia- Art. No.
meter meter
Abrasive sleeves 9 mm B 322 531 18 mm B 322 533(contents of 12 mm B 322 532 25 mm B 322 534package 10 parts)
q
w
e
r
w
e
r
q
w
78 Schneider Druckluft
Grinding machines
Precision rod grinder ● For sanding, polishing and milling in the toolsoundproofed making, model making and fixture construction
● Reduction of vibrations and protection againstcold hands by the rubberised handle
● Mass-produced with 3 mm welding tongs
● Continuous adaptation of the speed of rotationfor various working conditions
● No dust dispersion and extremely quiet thanksto the outlet air hose
Type Air requirem. Working press. Rot. speed Weight Art. No.l/min. bar min-1 kg
HW 700 170 6.3 70000 0.6 D 322 649
Angular rod grinder ● For deburring, sanding, milling ...soundproofed ● Also for grinding discs and mounted points up to
45 mm Ø● No dust dispersion and extremely quiet thanks to
the outlet air hose
● With safety lever to prevent unintentionalSwitch on
● Mass-produced with 6 mm welding tongs
Type Air requirem. Working press. Rot speed Weight Art. No.l/min. bar min-1 kg
HW 522 L 330 7 22000 0.45 D 322 653
One-handed grinder ● Handy device for derusting, sanding ● Each with 1 grinding disc with Ø 77 and114 mm
Type Air requirem. Working press. Rot. speed Weight Art. No.l/min. bar min-1 kg
EHS 320 4 15300 1.4 D 322 260
Angular grinding machine ● Handy and nevertheless efficient model● For common grinding discs of up to 125 mm Ø● With safety lever to prevent unintentional
Switch on
● M 14 threaded spindle for common grindingdiscs
● Mass-produced with an additional handle
Type Air requirem. Working press. Rot. speed Weight Art. No.l/min. bar min-1 kg
HW 125 L 380 6.3 11000 1.8 D 322 288
Belt grinders ● For derusting, deburring and sanding● Areas of application: Steel and rail technology,
mould making, vehicle construction, maintenance,plastering, etc.
● 360° swivelling grinding arm (width 10 mm) forawkward places
● Automatic clamping device for grinding belt
Type Air requirem. Working press. Rot. speed Weight Art. No.l/min. bar min-1 kg
HW 330 400 6.3 16000 0.75 D 322 313
Abrasive paper10 x 330 mm(Contents of packaging: 5 pieces)
Graining Art. No. Graining Art. No.
80 B 322 502 180 B 322 504
120 B 322 503
Angular grinding machine ● Particularly for sanding smaller surface areas, forsoundproofed maintenance and plastering work
● Optimal operation by 120° inclined drive spindle● Mass-produced with 6 and 3 mm welding tongs,
Grinding disc: 50 mm Ø, 6 grinding discs, 5 grind-ing fleeces, plastic case
● For common grinding discs: 50 mm Ø withscrew fastening
● No dust dispersion and extremely quietthanks to the outlet air hose
Type Air requirem. Working press. Rot. speed Weight Art. No.l/min. bar min-1 kg
HW 121 L set 350-450 6.3 18000 0.5 D 322 289
For car body work of all kinds,for derusting of metals, forundersealing and cavity sea-ling, for oil suction, for sheetmetal working You will see:with compressed air tools, it iseasier, quicker - simply moreprofessional!
Tools for the automobile industryand sheet metal working
Everything for the car.
Schneider Druckluft 79
80 Schneider Druckluft
Motor vehicle tools
Saw bladesBimetallic model(Contents of packaging:5 parts)
Car body saw ● Specially for use on car body sheet metal● With safety lever to prevent unintentional
switch on● Secure guidance for the saw and longer saw
blade service lives with the limit stop yoke.
Type Air- Working Stroke Stroke Cut thick- Weight Art. No.need press. rate length nessl/min. bar min-1 mm mm kg
KS 9 q 200 6 9300 9 1.2 0.6 D 322 306
KSA 9 set w 200 6.3 9300 9 1.2 0.9 D 322 319
● Cold protection by the rubberised handle
● KSA 9 set extremely quiet thanks to themass-produced outlet air hose. Delivered in atransport case
for sheet metal toothed length tooth separation Art. No. thicknesses mm mm mm
0.3 - 0.8 50 0.8 B 322 520
0.8 - 1.2 50 1.0 B 322 521
Special cutter ● For dismantling bonded car windscreens, withoutfor car windscreens vapours that are detrimental to your healthsoundproofed ● With safety lever to prevent unintentional
switch on● Extremely quiet because of the mass-produced
outlet air hose● 19 mm horizontal bolt tool holder
● Handy and user-friendly device due to its lowweight
● Can also be used with common grindingplates, diamond wheels, scrapers
● Included in the delivery: each with a straight,straight and displaced and bent and displacedblade, transport case
Type Air requirem. Working press. Rot. speed Weight Art. No.l/min. bar min-1 kg
HW SPA set 280 6.3 20000 1.0 D 322 667
Blade set (1 straight, 1 straight and flat, 1 flat and displaced, 1 bent and displaced)B 322 284
Sheet metal nibbler ● Very handy device, ideal for car body work● Cut width: 4.5 mm
● For separating sheet steel of up to 1.0 mm,Aluminium of up to 1.8 mm thick
Type Air requirem. Working press. Stroke rate Weight Art. No.l/min. bar min-1 kg
BN 45 280 6.3 3500 0.8 D 322 307
Cutting tappet and head B 322 505
q
w
soundproofed
Schneider Druckluft 81
Motor vehicle tools
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
UHW 2000 120 - 180 4 - 6 0.46 D 040 052
● For undersealing and cavity sealing.Multi-purpose gun ● For common electrical sockets with 40 mmcord thread.
● Mass-produced with a 90 cm spray hose
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
DBP-A 300 3-6 2.6 D 040 049
Set of nozzles 2 spray hoses with a length of 1000 mm,
1 rigid lance, 750 mm length B 040 151
● For undersealing and cavity sealing.● For common cartridges of up to 400 g and 1000 g
or loose material.● With fluid control screw
Pressure cup gun ● A needle valve prevents the nozzle from dryingnozzle. The material can also remain in thevessel over a longer period of time.
● Quick changing of the spray hoses using aplug-in adapter.
● Mass-produced with two 1000 mm long sprayhoses and a 750 mm long lance
● For fast, clean and easy oil changes forlawnmowers, small motorcycles, compressors,pressure jet devices, etc. thanks to the oil fillerplug
● Quiet work with a silencer.
Oil suction gun
Type Air requirem. Working press. Vessel Weight Art. No.l/min. bar l kg
ÖP. 120 - 160 6 - 8 0.75 0.7 D 040 151
● Relaxed work with the lockable clampinghandle.
● Easy control of the oil level in the see-throughvessel.
● Included in the delivery: Suction gun, flexiblesuction hose with a rigid attachment.
Common features:● With 1 : 40 pressure ratio for professional
working. 6 bar input pressure corresponds to apressure of 240 bar to the hydraulic nipple.
● For common 400 g cartridges or loose grease
● Optimal grip of the grease nipple with the4-claw holding system.
Grease gun Manual model:● With each actuation of the lever, a shot of
grease is obtained.
Automatic model● Here, grease is conveyed in fast shots until the
outlet lever is released. The lubrication processis then considerably easier and faster.
● The 500 m long connection hose guaranteesthe accessibility of awkward places.
Type Air requirem. Working press. Weight Art. No.l per stroke bar kg
FP-M (manual) 0.6 2 - 10 1.5 D 040 025
FP-A (automatic) 0.6 2 - 10 1.5 D 040 026
● For drawing off engine oils in motor vehicles,motor cycles, lawnmowers, lawn tractors...
● For brake bleeding in motor vehicles, motorcycles, motor scooters, etc.
● The plug adaptor for the suction probesguarantees fast tool-free probe changing
● Fast work with the use of two suction probesvia a connection sleeve
● Mass-produced with a special probe for brakebleeding
Oil suction andbrake bleeding devices
Type Air requirem. Working press. Vessel Weight Art. No.l/min. bar l kg
HW-ÖBG 160 6.3 5.5 1.7 D 040 152
● Long service life with an impact-resistantplastic casing
● Extremely quiet with a silencer at the airoutlet
● The large outlet opening allows fastevacuation from the vessel without tools
● Secure foothold due to its wide base● Problem-free continuous operation with
locking of the switch-on lever
82 Schneider Druckluft
Sheet metal working tools
Needle gun Common features:● Applications: Rough derusting, removing
welding slag, removing paint, stone working,removing plaster and concrete residue fromconcrete reinforcement.
● Long service life thanks to its robust 100%metal casing
● High service life with special steel needlesneedle length: 145 mm, Ø 3 mm
AT 12:● Tool-free rapid needle change with easy
unscrewing of the guide bush
Type Air requirem. Working press. No. impacts Needles Weight Art. No.l/min. bar min-1 kg
AT 12 qqqqq 120 6.3 4000 12 1.2 D 322 411
AT 19 wwwww 170 6.3 3000 19 2.6 D 322 412
AT 28 eeeee 220 6.3 4500 28 3.5 D 322 413
Replacement needles Set with 12 pieces for AT 12 B 322 279
Replacement needles Set with 19 pieces for AT 19 B 322 280
Replacement needles Set with 28 pieces for AT 28 B 322 281
Replacement needles Set with 12 pieces for AT 1 K B 322 275
Replacement needles Set with 19 pieces for AT 2 K B 322 278
Replacement needles Set with 28 pieces for AT 3 K B 322 277
AT 19:● Optimal adaptation to changing working
conditions with depth adjustment of the needleguide bush
● Cold protection by the rubberised handle● Ergonomic operation thanks to the gun gripAT 28:● Optimal adaptation to changing working
conditions with depth adjustment of the needleguide bush
● Ergonomic operation thanks to the gun grip
q
w
e
Riveting tongs ● Applications: For motor vehicle superstructu-res, in ventilation and façade construction,switch cabinet construction, car body con-struction and in the aircraft industry
● The use of various rivet holders accept allcommon rivets
● No laborious gathering of rivet points with thebolt catchment vessel
● Low air requirement, can therefore also be usedon building sites with smaller compressors
● NZ 500 with a pivotable compressed airconnection.
● Included in the delivery:NZ: various rivet holders4 x 10 rivet points, plastic caseNZ 500: various rivet holders, cardboard box
Type Air requirem. Working press. Rivet points Weight Art. No.l/stroke bar Ø mm kg
NZ 0.8 6.3 2.4 - 4.8 1.7 D 322 315
NZ 500 1.8 6.3 2.0 - 6.4 1.9 D 322 318
Accessories Type Art. No.
Main oiler For direct installation on compressed air tools, R 1/4"i/1/4"a D 641 071if no compressed air processing is available. R 3/8"i D 641 070Nominal pressure of 6 bar. Flow rate in both directionspossible.
Precision line oiler, nominal pressure of 16 bar. R 3/8"i D 640 072Adjustable via the needle valve
Swivel joint Prevents twisting of the compressed air hose B 100 010when working. Connection: 1/4"a – 1/4"i
Self-packaged articlesfor the shop shelf
W x D x H Weight Typemm kg
Transport and order system 395x295x105 1.4 Gr. 1 B 323 412for tools and accessories. 395x295x157 1.6 Gr. 2 B 323 413Without inlay.
Systainer
Drilling in its finest form: lightand handy Also soundproofed.Devices with gun grip and roddevices - to the most perfor-mant compressed air tools forthe highest demands.Schneider Druckluft has it!
Drilling machines and screwdriversFor the right turn.
Schneider Druckluft 83
84 Schneider Druckluft
Drilling machines
Drilling machine ● Right-hand motion / left-hand motion with fastchangeover
Type Air- Working Drilling Drilling Rotary Weight Art. No.need press. performance mm chuck speed
l/s bar Steel Wood mm min-1 kg
BM18 6 6 10 22 10 1800 1.1 D 322 245
● Reduction of the vibrations and protectionagainst cold hands by the rubberised handle
● No dust dispersion and extremely quiet thanksto the outlet air hose
Drilling machine ● Right-hand motionsoundproofed ● With 3/8" fast tightening drill chuck
● Handy, light device for the most tire-free work
Type Air- Working Drilling Drilling Rotary Weight Art. No.need press. performance mm chuck speed
l/s bar Steel Wood mm min-1 kg
HW 751 L 7 7 10 20 10 2200 1.2 D 322 648
Drilling machine ● Right-hand motion / left-hand motion with fastsoundproofed changeover
● With 3/8" fast tightening drill chuck
Type Air- Working Drilling Drilling Rotary Weight Art. No.need press. performance mm chuck speed
l/s bar Steel Wood mm min-1 kg
HW 525 L 6 6.3 10 20 10 1800 1.1 D 322 642
Drilling machine ● Right-hand motionsoundproofed ● With 1/2" fast tightening drill chuck and additional
handle● Reduction of the vibrations and protection against
cold hands by the rubberised handle● No dust dispersion and extremely quiet thanks to
the outlet air hose
Type Air- Working Drilling Drilling Rotary Weight Art. No.need press. performance mm chuck speed
l/s bar Steel Wood mm min-1 kg
HW 753 L 8 7 13 25 1.5-13 500 1.5 D 322 647
Angular drilling machine ● Right-hand motion / left-hand motion with fastchangeover
● With 3/8" fast tightening drill chuck● Particularly suited to narrow areas due to its low
overall height
Type Air- Working Drilling Drilling Rotary Weight Art. No.need press. performance mm chuck speed
l/s bar Steel Wood mm min-1 kg
HW 510 AH-L 7 6,3 10 20 10 1800 1,1 D 322,643
● With 3/8" fast tightening drill chuck
● No dust dispersion and extremely quietthanks to the outlet air hose
● Particularly slow rotating, powerful enginetype. Therefore also suitable for tools with alarger diameter (e.g. stirring rods).
● Longer device service life as a result of the airinput with dirt sieve
● No dispersion of drilling chips due to the outletbackwards
Type Wingspan Suitable for Art. No.mm drilling machine
SSBF 3/8'’ 10 BM 18, HW 751 L, HW 525 L B 322 230
SSBF 1/2'’ HW 753 L B 322 231
Fast tightening drill chuck
Schneider Druckluft 85
Screwdriver
● Included in the delivery:Magnetic bit holder, 4 bits, metal case
Type Air requirem. Working Rotary Rotary Weight Art. No.pressure torque speed
l/s bar Nm min-1 kg
HW 140 DB 7 6.3 100 11500 1.0 D 322 668
Rotary screwdriver ● Right-hand motion / left-hand motion with fastsoundproofed changeover
● Straight model with a rod grip and hanging yoke,particularly suited to assembly line work
● 1/4" horizontal bolt holder (6.35 mm)● With fast changing chuck
Type Air requirem. Working Rotary Rotary Weight Art. No.pressure torque speed
l/s bar Nm min-1 kg
HW 800 L 5 7 3-8 1800 1.0 D 322 672
Rotary screwdriver ● Right-hand motion / Left-hand motion with fastsoundproofed changeover
● Gun form● 1/4" horizontal bolt holder (6.35 mm)● With fast changing chuck● Reduction of the vibrations and protection against
cold hands by the rubberised handle
Type Air requirem. Working Rotary Rotary Weight Art. No.pressure torque speed
l/s bar Nm min-1 kg
HW 810 L 6 7 1-12 1650 1.2 D 322 673
Rotary screwdriver ● Very efficient device with double strikingmechanism
● Gun form● For screws up to max. 6 x 100 mm (in fir wood)
● Adjustment of the tightening torque over anexternally lying adjusting collar
● For screws of up to 6.5 mm because of hightightening torque
● Extremely quiet thanks to the outlet air hoseon the rear panel of the device
● Adjustment of the tightening torque over anexternally lying adjusting collar
● For screws of up to 6 x 40 mm (in fir wood)● Extremely quiet thanks to the outlet air hose
on the rear panel of the device
Rotary screwdriver ● Right-hand motion / left-hand motion with fastsoundproofed changeover
● Straight model with a rod grip and hanging yoke,particularly suited to assembly line work
● 1/4" horizontal bolt holder (6.35 mm)● With fast changing chuck
Type Air requirem. Working Rotary Rotary Weight Art. No.pressure torque speed
l/s bar Nm min-1 kg
HW 900 6 6.3 2.6-10.2 1800 1.4 D 322 674
● Adjustment of the tightening torque using aninternal adjusting collar. No unintentionaladjusting
● Extremely quiet thanks to the outlet air hoseon the rear panel of the device
Rotary screwdriver ● Right-hand motion / Left-hand motion with fastsoundproofed changeover
● Gun form● 1/4" horizontal bolt holder (6.35 mm)● With fast changing chuck
Type Air requirem. Working Rotary Rotary Weight Art. No.pressure torque speed
l/s bar Nm min-1 kg
HW 910 6 6.3 8-17 1800 1.45 D 322 675
● Adjustment of the tightening torque using aninternal adjusting collar. No unintentionaladjusting
● Extremely quiet thanks to the outlet air hoseon the rear panel of the device
The professional tool for manyareas of use: for joiners, furni-ture construction, case andpallet construction, for dispat-ching ... For top floor exten-sions, in order to assemblywooden ceilings, wall cover-ings or heat insulation plates,in order to cover stairs, forupholstering and for han-dicrafts... In a word: SchneiderDruckluft holds everythingtogether!
Riveting devices, staplers and nailing devicesSo that everything holds together!
Schneider Druckluft86
Schneider Druckluft 87
Riveting devices, staplers and nailing devices
Devices for smaller workshops andfor DIY enthusiasts with professional demands
● For securing films, fabrics, leather, insulatingmaterial, carpets, panelling
● Subcharger magazine for problem-free inflationwith clamps
Stapler ● Cold insulation and non-slip thanks to therubberised handle
● Contact security not required due tointerlocking on the trip lever
● For retaining clips, Type 80, length: 4–16 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Profifix 80/16 L 0.5 4 - 7 155 0.9 D 200 061
Retaining clips, Type 80 Rear width: 12.8 mm, wire thickness: 0.7 x 0.9 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
80/06 CNK 6 C 420 003 3,000 30,000 80/08 CNK 8 C 420 004 3,000 30,000 80/10 CNK 10 C 420 005 3,000 30,000 80/12 CNK 12 C 420 006 3,000 30,000 80/14 CNK 14 C 420 007 3,000 30,000 80/16 CNK 16 C 420 008 3,000 30,000
● For securing tongue and groove boardsdirectly into the groove (invisible), trimmingschip boards, etc.
● Subcharger magazine for problem-free inflationwith clamps
Stapler ● Robust metal casing● Reduced health risk due to redirection of the
outgoing air● With contact security● For retaining clips, Type 90, length: 15-25 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Profifix 90/25 0.5 4 - 7 100 1.3 D 200 595
Retaining clips, Type 90 Rear width: 5.8 mm, wire thickness: 1.05 x 1.27 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
90/15 CNKH 15 C 420 022 2,000 20,000 90/20 CNKH 20 C 420 024 2,000 20,000 90/25 CNKH 25 C 420 027 2,000 20,000
● Securing of window bars, beater blades,mouldings invisible nailing of bonded woodenparts
● Side charger magazine for problem-freeinflation with nails
Upsetting nail driver ● Robust metal casing● Reduced health risk due to redirection of the
outgoing air● With contact security● For upsetting nails, Type SK, length: 13–30 mm
Type Air requirem. Working press. Magazine Weight Art. No.
l/stroke bar capacity kg
Profifix SK 30 0.5 4 - 7 100 1.0 D 200 230
Upsetting nails, Type SK Wire thickness: 0.9 x 1.2 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
SK 113 NK 13 C 520 011 1,000 SK 116 NK 16 C 520 012 1,000 SK 120 NK 20 C 520 013 1,000 SK 125 NK 25 C 520 014 1,000 SK 130 NK 30 C 520 015 1,000 SK 130 V 2 A 30 C 521 005 5,000
BK = bare, C = chisel point, CD = special point, D = saw point, FZ = hot-dip galvanised, H = resinated, NK = galvanised, Ri = ring modelS = screw model, B = brads, CN = coil nails, RN = round-head nails, SK = upsetting nails, TN = T nailsZ = clamps with construction authorization in accordance with DIN 1052 Part 2
88 Schneider Druckluft
● For securing tongue and groove boardsdirectly into the groove (invisible), trimmingschip boards, etc.
● Subcharger magazine for problem-free inflationwith clamps
● Cold insulation and non-slip thanks to therubberised handle
Stapler ● With contact security● Reduced health risk due to adjustable
redirection of the outgoing air● Included in the delivery: in the transport case● For retaining clips, Type 90, length: 15-30 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix 90/30 0.5 3.5 - 8 110 1.4 D 200 075
Retaining clips, Type 90See page 89.
Riveting devices, staplers and nailing devices
Devices for the discerning craftsman.Outstanding performance, quality and equipment
● Upholstery, room furnishing, wood industry,joinery
● Subcharger magazine for problem-free inflationwith clamps
● Cold insulation and non-slip thanks to therubberised handle
Stapler ● Contact security not required due tointerlocking on the trip lever
● Reduced health risk due to redirection of theoutgoing air
● Well suited to consolidation and awkwardplaces with its slim front panel
● For retaining clips, Type 80, length: 6-16 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix 80/16 L 0.5 4 - 7 155 0.9 D 200 062
Retaining clips, Type 80 Rear width: 12.8 mm, wire thickness: 0.7 x 0.9 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
80/06 CNK 6 C 420 003 3,000 30,000 80/08 CNK 8 C 420 004 3,000 30,000 80/10 CNK 10 C 420 005 3,000 30,000 80/12 CNK 12 C 420 006 3,000 30,000 80/14 CNK 14 C 420 007 3,000 30,000 80/16 CNK 16 C 420 008 3,000 30,000
● Securing of furniture rear panels, hard fibrepanels, chip boards
● Overcharger magazine with automatic lateralopening for problem-free inflation with clamps
● Cold insulation and non-slip thanks to therubberised handle
● Extremely light thanks to the outlet air silencer
Stapler ● With contact security and touch-downactivation for quick wefting
● With depth control for adjusting the drivingdepth
● Fast opening of front plates in order to rectifyfaults
● For retaining clips, Type 92, length: 15-32 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix 92/32 0.7 4 - 7 135 1.2 D 200 069
Retaining clips, Type 92 Rear width: 8.85 mm, wire thickness: 1.05 x 1.27 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
92/20 CNKH 20 C 420 043 5,000 50,000 92/25 CNKH 25 C 420 045 5,000 50,000 92/30 CNKH 30 C 420 047 3,000 30,000 only for Superfix 92/40: 92/40 CNKH 40 C 420 051 3,000 30,000
BK = bare, C = chisel point, CD = special point, D = saw point, FZ = hot-dip galvanised, H = resinated, NK = galvanised, Ri = ring modelS = screw model, B = brads, CN = coil nails, RN = round-head nails, SK = upsetting nails, TN = T nailsZ = clamps with construction authorization in accordance with DIN 1052 Part 2
Schneider Druckluft 89
BK = bare, C = chisel point, CD = special point, D = saw point, FZ = hot-dip galvanised, H = resinated, NK = galvanised, Ri = ring modelS = screw model, B = brads, CN = coil nails, RN = round-head nails, SK = upsetting nails, TN = T nailsZ = clamps with construction authorization in accordance with DIN 1052 Part 2
Riveting devices, staplers and nailing devices
Devices for the discerning craftsman.Outstanding performance, quality and equipment
● Interior refinishing, e. g. securing of wall andceiling coverings, chip boards
● Uppercharger magazine for problem-freeinflation with clamps
● Cold insulation and non-slip thanks to therubberised handle
● With contact security
Stapler ● Reduced health risk due to adjustableredirection of the outgoing air
● Well suited to consolidation and awkwardplaces with its slim front panel
● Fast opening of front plates in order to rectifyfaults
● Included in the delivery: in the transport case● For retaining clips, Type 90, length: 20–40 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix 90/40 0.7 4 - 7 100 1.2 D 200 083
Retaining clips, Type 90see below.
● For securing groove and spring boards,panels, trimmings. With a device, the retainingclip is secured in the groove and an almostinvisible nail is fixed to the border area of thecovering.
● Subcharger magazine● Cold insulation and non-slip thanks to the
rubberised handle● With contact security● Reduced health risk due to adjustable
redirection of the outgoing air● With depth control for adjusting the driving
Multi-purposenail driver
depth● Slim front panel for accepting distance claws
for securing panels● For upsetting nails, Type SK, and retaining clips
Type 90 and Type ES● D 200 086 in a transport case with
2000 clamps 90/25 and 1000 SK 130 nails● D 300 040 in a systainer with 2000 clamps
90/25, each with 1000 nails of Types SK 120,130 and 140
● D 200 086 in a transport case with2000 clamps 90/25 and 1000 SK 140 nails
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix Combi 30 0.5 4 - 7 100 1.2 D 200 086 Superfix Combi 40 in a systainer 0.5 4 - 7 100 1.4 D 300 040 Superfix Combi 40 in a case 0.5 4 - 7 100 1.4 D 300 045
Retaining clips, Type 90 Rear width: 5.8 mm, wire thickness: 1.05 x 1.27 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
90/15 CNKH 15 C 420 022 2,000 20,000 90/20 CNKH 20 C 420 024 2,000 20,000 90/25 CNKH 25 C 420 027 2,000 20,000 90/28 CNKH 28 C 420 029 5,000 25,000 90/30 CNKH 30 C 420 030 2,000 20,000 90/30 CV2AH 30 C 421 030 5,000 90/35 CNKH 35 C 420 034 2,000 20,000 90/40 CNKH 40 C 420 035 2,000 20,000
Upsetting nails, Type SK Wire thickness: 0.9 x 1.2 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
SK 116 NK 16 C 520 002 5,000 SK 120 NK 20 C 520 003 5,000 SK 125 NK 25 C 520 004 5,000 SK 130 NK 30 C 520 005 5,000 SK 130 V 2 A 30 C 521 005 5,000 SK 135 NK 35 C 520 006 5,000 SK 140 NK 40 C 520 008 5,000
Combi 30
15-30 mm
Combi 40
20-40 mm
90 Schneider Druckluft
BK = bare, C = chisel point, CD = special point, D = saw point, FZ = hot-dip galvanised, H = resinated, NK = galvanised, Ri = ring modelS = screw model, B = brads, CN = coil nails, RN = round-head nails, SK = upsetting nails, TN = T nailsZ = clamps with construction authorization in accordance with DIN 1052 Part 2
● Manufacture of cases, one-way pallets, cratepackaging, frames, partition walls, frameworks,casings, securing of plaster fibre boardsFermacell - in accordance with DIN 18182 Part 3)
● Uppercharger magazine for problem-free inflationwith clamps
● Cold insulation and non-slip thanks to therubberised handle
Stapler ● With contact security and touch-downactivation for quick wefting
● Extremely light thanks to the outlet air silencer● With depth control for adjusting the driving
depth● Fast opening of front plates in order to rectify
faults● For retaining clips, Type 114 up to 64 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix 114/65 2.1 4 - 7 156 2.3 D 200 064
Retaining clips, Type 114 Rear width: 10.4 mm, wire thickness: 1.4 x 1.6 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
114/30 CNKH 30 C 430 021 20,000 114/35 CNKH 35 C 430 022 10,000 114/40 CNKH 40 C 430 023 10,000 114/45 CNKH 45 C 430 024 10,000 114/50 CNKH 50 C 430 025 10,000 114/65 CNKH 65 C 430 026 10,000
Retaining clips, Type 114 specially for plate securing (e.g. Fermacell)
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
114/18 CDNKH 18 C 430 119 20,000 114/22 CDNKH 22 C 430 120 20,000 114/24 CDNKH 24 C 430 121 20,000
● Securing of window bars, beater blade mouldings,invisible nailing of bonded wooden parts
● Side charger magazine for problem-free inflationwith nails
Upsetting nail driver ● Cold insulation and non-slip thanks to therubberised handle
● With contact security● Scope of delivery: in a systainer● For upsetting nails, Type SK, length 13-40 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix SK 40 0.6 4 - 7 120 1.0 D 300 049
Upsetting nails, Type SK Wire thickness: 0.9 x 1.2 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
SK 113 NK 13 C 520 011 1,000 SK 116 NK 16 C 520 002 5,000 SK 120 NK 20 C 520 003 5,000 SK 125 NK 25 C 520 004 5,000 SK 130 NK 30 C 520 005 5,000 SK 130 V 2 A 30 C 521 005 5,000 SK 135 NK 35 C 520 006 5,000 SK 140 NK 40 C 520 008 5,000
Riveting devices, staplers and nailing devices
Devices for the discerning craftsman.Outstanding performance, quality and equipment
Schneider Druckluft 91
Riveting devices, staplers and nailing devices
Devices for the discerning craftsman.Outstanding performance, quality and equipment
Type Art. No.
Limit stop for window bars B 323 476
BK = bare, C = chisel point, CD = special point, D = saw point, FZ = hot-dip galvanised, H = resinated, NK = galvanised, Ri = ring modelS = screw model, B = brads, CN = coil nails, RN = round-head nails, SK = upsetting nails, TN = T nailsZ = clamps with construction authorization in accordance with DIN 1052 Part 2
● Securing of window bars, mouldings and plinthtrimmings. Invisible nailing of bonded woodenparts
● Side charger magazine for problem-free inflationwith nails
● Cold insulation and non-slip thanks to therubberised handle
Upsetting nail driver ● With contact security● With depth control for adjusting the driving
depth● Scope of delivery: in a systainer● For upsetting nails, Type SK, length 16-50 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix SK 50 1.2 4 - 7 120 1.4 D 300 050
Upsetting nails, Type SK Wire thickness: 0.9 x 1.2 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
SK 116 NK 16 C 520 002 5,000 SK 120 NK 20 C 520 003 5,000 SK 125 NK 25 C 520 004 5,000 SK 130 NK 30 C 520 005 5,000 SK 130 V 2 A 30 C 521 005 5,000 SK 135 NK 35 C 520 006 5,000 SK 140 NK 40 C 520 008 5,000 SK 150 NK 50 C 520 010 5,000
● One-way pallets, cases, crate packaging,frameworks, casings, frames
● Uppercharger magazine for problem-free inflationwith nails
● With contact security
T nail driver ● Reduced health risk due toadjustable redirection of the outgoing air
● Well suited to awkward places thanks to its slimfront panel
● For T nails, Type TN, length 32–64 mm
Type Air requirem. Working press. Magazine Weight Art. No.
l/stroke bar capacity kg
Superfix T 65 1.5 4 - 7 80 2.6 D 300 051
T nails, Type TN Wire thickness: 2.18mm, galvanized
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
TN 22/32 NK 32 F 440 011 10,000 TN 22/44 NK 44 F 440 013 10,000 TN 22/50 NK 50 F 440 014 10,000 TN 22/60 NK 60 F 440 016 10,000 TN 22/64 NK 64 F 440 017 10,000
92 Schneider Druckluft
BK = bare, C = chisel point, CD = special point, D = saw point, FZ = hot-dip galvanised, H = resinated, NK = galvanised, Ri = ring modelS = screw model, B = brads, CN = coil nails, RN = round-head nails, SK = upsetting nails, TN = T nailsZ = clamps with construction authorization in accordance with DIN 1052 Part 2
● Laying / Fixing of roof sheeting, attaching ofbitumen shingles, securing / fixing of sound proof-ing, securing of paper board containers on wood
● Coil magazine for problem-free inflation with nails● Extremely light thanks to the outlet air silencer● With contact security
Roofing paper naildriver
● Cold insulation and non-slip thanks to therubberised handle
● Good view of the nail point through see-throughprotection cover
● Height-adjustable nail overlay plate● Reliable nail supply due to pneumatic feed● For roofing paper nails, length 19–45 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix DP 45 1.1 7 120 2.4 D 300 061
Roofing paper nails, Type CNWired, nail head diameter 10 mm,Wire thickness 3.05 mm, hot-dip galvanised
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
CN 31/22 FZ 22 F 440 076 7,200 CN 31/25 FZ 25 F 440 077 6,500 CN 31/32 FZ 32 F 440 078 5,000
● Manufacture of cases, crate packaging, pallets,Cable reels, roof casing, roof insulation. Structuraltimber work
● Coil magazine for problem-free inflation with nails● Extremely light thanks to the outlet air silencer● With contact security
Coil nail driver ● Cold insulation and non-slip thanks to therubberised handle
● Good view of the nail point through see-throughprotection cover
● Height-adjustable nail overlay plate● Reliable nail supply due to pneumatic feed● For wired coil nails
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix CN 90 3.5 7 250 3.3 D 350 086
Coil nails, Type CNWired.16° nail bevel, wire thickness: 2.9 and 3.1mm.
Type Length Art.-No. Packaging unit Covering box
mm Quantity Quantity
CN 29/65 BK 65 F 440 094 6,000
CN 29/65 NK 65 F 440 195 6,000 CN 29/70 BK 70 F 440 096 6,000 CN 29/80 BK 80 F 440 097 4,500 CN 29/80 BKS 80 F 440 213 4,500 CN 29/90 BK 90 F 440 110 4,500 CN 29/90 BKS 90 F 440 214 4,500 CN 31/70 BK 70 F 440 098 5,400 CN 31/80 BK 80 F 440 099 3,600 CN 31/90 BK 90 F 440 100 3,600
Riveting devices, staplers and nailing devices
Devices for the discerning craftsman.Outstanding performance, quality and equipment
Schneider Druckluft 93
Riveting devices, staplers and nailing devices
Devices for the discerning craftsman.Outstanding performance, quality and equipment
BK = bare, C = chisel point, CD = special point, D = saw point, FZ = hot-dip galvanised, H = resinated, NK = galvanised, Ri = ring modelS = screw model, B = brads, CN = coil nails, RN = round-head nails, SK = upsetting nails, TN = T nailsZ = clamps with construction authorization in accordance with DIN 1052 Part 2
● Manufacture of cases, crate packaging, pallets,cable reels, roof casing, nail binders.
● Reduced health risk due to adjustable redirectionof the outgoing air
● With contact security● Cold insulation and non-slip thanks to the
rubberised handle
Round-head nail driver ● Good view of the nail point through see-throughprotection cover
● With depth control for adjusting the drivingdepth
● For resin-bonded striated nails, Type RN,Length: 60-100 mm
Type Air requirem. Working press. Magazine Weight Art. No.l/stroke bar capacity kg
Superfix RN 100 A 2.25 7 60 3.8 D 200 162
Striated nails, Type RNResin-bonded and striated.21° nail bevel, Wire thickness: 2.9, 3.1 and 33.4 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
RN 29/65 BK 65 F 440 021 3,000 RN 29/65 BKSH 65 F 440 083 3,000 RN 31/70 BKH 70 F 440 027 3,000 RN 31/80 BKH 80 F 440 024 3,000 RN 31/90 BKH 90 F 440 025 3,000 RN 34/100 BKH 100 F 440 120 2,000
For all sorts of clamps and nails,we can make you a special offer
larger purchase quantities.
Retaining clips, Type 347 Rear width: 4.8 mm, wire thickness: 0.6 x 0.9 mm.
Type Length Art. No. Packaging unit Covering box
mm Quantity Quantity
347/10 CNK 10 C 430 003 2,500 25,000 347/16 CNK 16 C 430 006 2,500 25,000 347/20 CNK 20 C 430 008 2,500 25,000 347/25 CNKH 25 C 430 010 2,500 25,000
Accessories forProfifix 347/25
Widely usable spray guns forsmall surface areas, for exam-ple for modelling and motorvehicle repairs. For paintingdoors and heaters, for coveringdispersion paints, for impreg-nating wood and for spraying"upwards" . Round and ovalpattern adjustment Accordingto our motto: Cleanliness,speed, comfort.
Paint spray guns for DIY enthusiastsBring colours into your home.
Schneider Druckluft94
Schneider Druckluft 95
AccessoriesSets of nozzles Art. No. Sets of nozzles Art. No.
Ø mm Ø mm
1.3 B 030 310 2.2 B 030 3141.5 B 030 311 2.5 B 030 3151.7 B 030 3121.9 B 030 313 Flowing cup B 030 267
● With a stainless steel nozzle 0.5 l flowing cup withdrop stop
● Continuous round and oval pattern adjustment
Paint spray gun ● With air micrometer● Mass-produced with a selection of three
different nozzles
Type Nozzle Air requirem. Working press. Weight Art. No.Ø l/min. bar kg
Optimal 2001 - 1.3 1.3 120 - 150 2 - 4 0.72 D 030 200
Optimal 2001 - 1.5 1.5 120 - 150 2 - 4 0.72 D 030 059
Optimal 2001 - 1.9 1.9 120 - 150 2 - 4 0.72 D 030 201
● Low-pressure spray gun with HVLP system (HighVolume Low Pressure): A low spraying pressurereduces the rebound of paint mist from the object.
● Higher coverage, reduced paint-consumption● With a 1.5 mm Ø stainless steel nozzle and 0.5 l
flowing cup.
Paint spray gun ● Continuous round and oval pattern adjustment● With an air micrometer and colour control
valve● Less overspray, therefore less
disposal costs for discharge filter● Paint savings of up to 30%
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
Optimal 2001 HVLP 150 - 180 2.6 0.72 D 030 181
Paint spray guns
● Widely usable spray guns for smaller surface areas,e.g. model making, but also motor vehicle repairs
● With 0.7 mm Ø nozzle for round and oval patterns
Paint spray gun ● With a flowing cup (0.25 l) as well as twovacuum cups with an adaptor
● Cup change set for upward and verticalspraying by means of a swivelling paint vessel
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
Mini Vario 20 - 120 0.5 - 3.5 0.42 D 030 090
AccessoriesSets of nozzles Art. No. Sets of nozzles Art. No.
Ø mm Ø mm
0.5 B 030 254 1.0 B 030 252
0 .7 B 030 251 1.2 B 030 253
Flowing cup B 030 250
Cup change set (3 vessels with screw cap) B 030 158
Adaptor for the cup change set B 030 159
● Adjustable for round and oval patterns.● With a 1.4 mm Ø nozzle
Paint spray gun
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
Standard 100 - 120 2 - 4 0.52 D 030 039
AccessoriesSets of nozzles Art. No. Sets of nozzles Art. No.
Ø mm Ø mm
1.2 B 030 180 1.8 B 030 182
1.4 B 030 181
AccessoriesSets of nozzles Art. No. Sets of nozzles Art. No.
Ø mm Ø mm
1.3 B 030 320 1.9 B 030 3231.5 B 030 3211.7 B 030 322 Flowing cup B 030 267
A programme worthy of a mar-ket leader. For professionalcoverage of paints, varnishesor plaster. With a gun or a rol-ler.
Revolutionary: for extremely highcoverage the FP-HTE paintspray guns (up to 93.8%) andthe high-performance paintspray guns in the Series W400/W 200 (up to 95%). Allthat with less paint loss, micro-fine spray and even paintcoverage, even for highly vis-cous materials.Particularly suited to large sur-face areas. For larger quantities and morerational work: the SchneiderDruckluft material pressurevessel - versatile, transporta-ble, economical. Simply per-fect!
Paint spray guns and material pressure vessels for craftsmen
Creating colourful worlds.
Schneider Druckluft96
Schneider Druckluft 97
FP-HTE – The revolutionin paint spray guns:● Extremely high coverage of up to 93.8% means
less paint loss and less disposal costs● Particularly suitable for large surface areas● Micro-fine spray also for highly viscous materials● Due to a low air requirement also with smaller
usable compressors● Continuous round and oval pattern adjustment● 0.6 l flowing cup , Vacuum cup: 1.0 l contents● Extensively tire-free work due to the low weight
Paint spray gun ● Suitable for working with water-soluble andsolvent-based material due to the stainlesssteel paint nozzle and needle
● Clean spraying result thanks to the stainlesssteel paint sieve with a long service life. Dirtparticles do not enter the paint channel
● With a colour control valve and a drop stop● Nozzle recommendation: 1.0 - 1.5 mm Ø clear
varnish 1.5 - 1.8 mm base coat Ø, 2.5 mm Øpolyester spray spatula
Paint spray guns
Sets of nozzlesfor FP-HVLP
Ø mm Art. No. Ø mm Art. No.
1.3 B 030 300 2.3 B 030 304
1.5 B 030 301 Flowing cup B 030 0181.8 B 030 302 Replacement2.0 B 030 303 filter (5 pcs.) B 030 008
coverage
up to 93.8%!
AccessoriesSets of nozzles FP-HTE FP-HTE-S, FP-HTE-MA
Art. No. Art. No.Ø mm
1.0 B 030 011 B 030 1431.3 B 030 012 B 030 1441.5 B 030 013 B 030 1451.8 B 030 014 B 030 1462.0 B 030 015 B 030 1472.5 B 030 016 B 030 1483.0 B 030 017 B 030 1493.5 B 030 024Flowing cup B 030 018
Type Nozzle Air requirem. Working press. Weight Art. No.Ø l/min. bar kg
Flowing cup model
FP-HTE 1.3 1.3 130 - 200 2 0.54 D 030 198
FP-HTE 1.5 1.5 130 - 200 2 0.54 D 030 010
FP-HTE 1.8 1.8 130 - 200 2 0.54 D 030 199
Vacuum cup model
FP-HTE-S 1.5 80 - 290 2 0.82 D 030 202
With material connection
FP-HTE-MA 1.5 100 - 250 2 0.48 D 030 203
● Compact paint spray gun for small surfaceareas.
● Ideal for repair work, smaller repairs and
Paint spray gun modellers.● With a 0.5 mm Ø jet nozzle for round patterns
and a 0.175 l Akulon flowing cup.
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
AZ 5 30 - 80 2 - 4 0.38 D 030 020
AccessoriesSets of nozzles Art. No. Sets of nozzles Art. No.
Ø mm Ø mm
0.3 B 030 032 1.0 B 030 034
0.5 B 030 0220.8 B 030 033 Flowing cup B 030 021
98 Schneider Druckluft
W 400 and High-performance top-class paint spray guns for trade and Industry.W 200 Outstanding performance, operation, quality and life cycle
Sets of nozzles FX 2000 FX 2000 M/FX 2000 SArt. No. Art. No.
Ø mm
Standard model
1.3 B 030 280
1.5 B 030 281
1.7 B 030 282
1.9 B 030 283
2.2 B 030 279
2.5 B 030 295
HVLP model
1.3 B 030 285 B 030 385
1.5 B 030 286 B 030 386
1.7 B 030 288 B 030 388
1.9 B 030 287 B 030 387
Plastic flowing cup B 030 290
Aluminium vacuum cup B 030 292
● Extremely high coverage of up to 95% resulting inless paint loss and lower disposal costs
● Clearly less ecological damage● Particularly suitable for large surface areas● Micro-fine spray and regular paint coverage● Reduced operating costs as a result of the low air
requirement● Optimal operation due to an ergonomic grip and
favourable weight distribution● No overstraining as a result of the low weight and
the reduced discharge power● Suitable for working with water-soluble and
solvent-based materials due to the stainless steelpaint nozzle and needle
● Continuous round and oval pattern adjustment.
● Light cleaning and maintenance by chrome-plated guns
● The air pressure can be directly controlled fromthe gun via a mass-produced air micrometer
● The low noise level of only 79.7 dB(A)corresponds to the European standards
● Three models:- W 400 with a flowing cup (600 ml) and a
1.3 mm Ø nozzle specially for effect paint formotor vehicles
- W 400 with a flowing cup (600 ml) and a1.8 mm Ø nozzle for the wood sector andbase materials
- W 200 with 3/8"a material connection and a1.2 mm Ø nozzle for extremely high surfaceperformances
Paint spray guns
coverage
up to 95%!
Type Air requirem. Work. press. Weight Nozzle Ø Art. No.l/min. bar kg mm
W 400-1.3 q 270 2 0.44 1.3 D 030 400
W 400-1.8 q 270 2 0.44 1.8 D 030 401
W 200-1.2 w 560 3 0.38 1.2 D 030 405
made by
Accessoriesfor the FX 2000 Series
Sets of nozzles Art. No. Air caps Art. No. Ø mm
1,2 B 030 404 LK 12 B 030 407 1,3 B 030 400 LK 16 B 030 406 1,4 B 030 401 LK 18 B 030 405 1,6 B 030 402 Filterset W 400 B 030 408 1,8 B 030 403 Flowing cup W 400 B 030 409
Connection from nozzle and suitable air cap to the spray gunReplacement nozzle Ø
1,2 1,3 1,4 1,6 1,8 W 200 B 030 407 B 030 407 B 030 407 B 030 407 B 030 407 W 400 --- B 030 406 B 030 406 B 030 406 B 030 405
w
q
Schneider Druckluft 99
Paint spray guns
● Specially suitable for colourful effects,dispersion- and thick-film paints.
● Less paint mist as a result of the internal air /material plenum chamber.
● Sharp border delimitation, regular structure,mist-poor paint spray
Paint spray gunfor dispersion paints
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
FP-DB with a vacuum pressure cup 150-400 1-5 1.33 D 030 197
Accessories (slotted nozzles)Sets of nozzles Art. No. Sets of nozzles Art. No.
Ø mm Ø mm
2.0 B 030 340 2.5 B 030 341
● Two control knobs for separately adjusting thematerial flow rate and the pressure.
● With a 2.5 mm Ø slotted stainless steel nozzle● Vacuum pressure cup: 0.7 l contents
Type Air requirem. Work. press. Weight Art. No.
l/min. bar kg
HW-TSP 225 5 1.26 D 030 063
Hopper spray gun ● Two spray guns in one: Suitable both forworking with rough plaster and fibre plaster andchips, sequins, jibs...
● Optimal adapting of the air quantity to thematerial to be processed by means of an aircontrol valve. No additional pressure reducernecessary
● Suitable for spraying walls and ceilings(45° angle included in the delivery)
● Material control screw for working on plastering
● Can be used with a large filling hopper for largesurface areas. Easy guidance of the gun thanksto an additional handle on the filling hopper
● Mass-produced with Ø 4, 6 and 8 mm nozzlesfor plastering as well as Ø 15 and 18 mmnozzles for chips etc.
● Work made easier by the fixing clamp for thedischarge lever.
● Flowing cup contents: 5 l
AccessoriesSets of nozzles for plastering Sets of nozzles for chips
Art. No. Art. No.Ø mm Ø mm
4.5 B 030 350 15.0 B 030 353
6.0 B 030 351 17.5 B 030 354
8.0 B 030 352
Flowing cup B 030 355
Swivel joint ● Prevents the compressed air hose from becoming twisted● Holders: 1/4"a – 1/4"i
Art. No.
¸ Consisting of a filter pressure reducer and a micro-filter¸ Particularly suited to spray booths¸ Micro-filter with automatic condensate discharge for separating
micro-fine oil and water aerosols and solid impuritieswith particles of up to 0.01 µm
¸ 2 3/8" air discharges¸ Control range 0-12 bar.¸ G 1/2" connection thread D 326 028
With 2 interchangeable A 1 active charcoal filters in accordance D 770 128with DIN EN 140 for organic gases and vapours.With a holder ring and 2 prefilters.
Replacement filter B 030 157Prefilter (10 pieces for D 770 128 and D 770 126) B 030 153
For determining paint viscosity in accordance with Ford-4 B 030 079Easy cleaning, made entirely from plastic.
With a pressure gauge and a plug-in nipple. D 202 105For all paint spray guns for controlling the input pressure.R 1/4" i connection
B 100 010
Breathing mask
Viscosity measurement cup
Pressure regulating valve
AccessoriesMaintenance unitType WE-FDM/FF 1/2"
100 Schneider Druckluft
Type Working Volume Weight Art. No.pressure Vessel Int. vessel
bar l l kg
Sprayboy 24, zinc-plated 8 24 16 25.5 D 040 063
40 V 4 A Sprayboy 8 40 – 27.0 D 040 086
Material pressure vesseland special devices
Paint pressure vessel ● For working on paints and varnishes with paintspray guns or spraying lances
● Optimal adapting of the material pressure to thefluid to be processed by means of the pressurereducer
● Long life cycle as a result of the stainless alu-minium vessel. Floor additionally strengthenedby a metal ring.
● Light material filling and problem-free cleaningof the vessel thanks to a large screw cap
● Safety valve on the screw cap as an additionalprotection device for the user
● Work made easier by the carrying handle thatcan be used to carry the vessel during thespraying process
● Disruption of the compressed air supply at theair input valve. The hose can remainconnected
● Mass-produced with a multi-purpose materialhose, length 1.5 m
The areas of use for the fluid pressure vessel with the necessary accessory partsare organized and described according to its applications on the following pages.
Sprayboy ● Applications such as those for the Paintboy, butadditionally for spray plastering, also for spraycleaning, rough fibres and for sand blasting.
● The V 4 A vessel is also suitable for workingwith soft material fluids, such as textile andwool fibre plaster.
● Secure footholding as a result of its stableframe.
● Easy transport with its large wheels.● Mass-produced with 2 pressure reducers with
pressure gauges for setting the material andworking pressures. Water separator at the airinput. 2 material connections (1 large clawcoupling, 1 x 3/8" a connection thread).
● Sprayboy 24 with a zinc-plated vessel,Sprayboy 40 with a V 4 A vessel.
Type Working Volume Weight Art. No.pressure Vessel Int. vessel
bar l l kg
Paint boy 8 24 16 18.6 D 040 061
Paint boy ● Applications such as those for the materialpressure vessel, but also for rolling dispersionpaints.
● Secure footholding as a result of its stableframe.
● Easy transport with its large wheels.● Mass-produced with a pressure reducer and a
pressure gauge for continuously adjusting thematerial pressure.
● 3/8" a material connection
Type Working Volume Weight Art. No.pressure vessel
bar l kg
FDB 2 0-4 2 1.4 D 040 056
Paint and materialpressure vessels withspecial devices
Common features:● Time and cost-saving for spraying work on
large surface areas.● Compact and easy to handle.● Robust version for use on building sites.
Material pressurevessel
● For working with dispersion paints, colourful ormultiple effect paints, priming varnishes and topcoats, wallpaper solvent, preservers, deepsolvent primers, thin wood protection varnish,cleansing agents.
● Mass-produced with a pressure reducer forcontinuous adjustment of the material pressure,vessel bleed valve.
● 3/8" a material connection
Type Working Volume Weight Art. No.pressure Vessel Int. vessel
bar l l kg
MDB 10 6 10 — 3.4 D 040 055
Schneider Druckluft 101
Special devices for the material pressure vessel
Spraying paints and varnishes
Paint spray gun ● High-performance paint spray guns for thediscerning craftsman
● With material connection for use with thematerial pressure vessel for particularly largesurface areas
Type Air requirem. Work. press. Weight Nozzle Ø Art. No.l/min. bar kg mm
FP 2001 M-MA 200 2-4 0.70 2.5 D 030 194
Accessories (slotted nozzles)Sets of nozzles Art. No. Sets of nozzles Art. No.
Ø mm Ø mm
2.0 B 030 340 3.0 B 030 342
2,5 B 030 341
● Particularly suitable for colourful effect anddispersion paints
● 3/8" a material connection
Resistant to thinning agents.3/8" i material connection.
Length: 10 m, Material hose: 13x4 mm, Compressed air hose: 10x2.7 mm D 740 008
Length: 5 m, Material hose: 9x3.5 mm, Compressed air hose: 10x2.7 mm D 740 002
Length: 1.5 m, Material hose: 9x3.5 mm, Compressed air hose: 6x3mm D 740 109
Length 10 m, 9x3 mm. Resistant to thinning agents D 740 006
Accessories
Material pressure hose
Multi-purpose material hose
Farbspritzpistole ● Extremely high coverage of up to 93.8% meansless paint loss and less disposal costs
● Particularly suitable for large surface areas● With material connection for use with the
material pressure vessel for particularly largesurface areas
● Suitable for working with water-soluble andsolvent-based material due to the stainlesssteel paint nozzle and needle
● 3/8" a material connection
Type Air requirem. Work. press. Weight Nozzle Ø Art. No.l/min. bar kg mm
W 200 - 1,2 560 3 0,44 1,2 D 030 405
AccessoriesSets of nozzles Art. No. Sets of nozzles Art. No.
Ø mm Ø mm
1,2 B 030 404 1,6 B 030 402
1,3 B 030 400 1,8 B 030 403
1,4 B 030 401 Air cap LK 12 B 030 407
Paint spray gun ● Extremely high coverage of up to 93.8% meansless paint loss and less disposal costs
● Particularly suitable for large surface areas● With material connection for use with the
material pressure vessel for particularly largesurface areas
● Suitable for working with water-soluble andsolvent-based material due to the stainlesssteel paint nozzle and needle
● 3/8" a material connection
Type Air requirem. Work. press. Weight Nozzle Ø Art. No.l/min. bar kg mm
FP-HTE-MA 100-250 2 0.48 1.5 D 030 203
AccessoriesSets of nozzles Art. No. Sets of nozzles Art. No.
Ø mm Ø mm
1.0 B 030 143 2.0 B 030 147
1.3 B 030 144 2.5 B 030 148
1.5 B 030 145 3.0 B 030 149
1.8 B 030 146
102 Schneider Druckluft
Special devices for the material pressure vessel
Art. No.
Outstanding operational characteristic thanks to the double ball bearing. D 900 501Width 25 cm.
"Karalon" replacement roller B 900 504
For the "Karalon" paint roller, length 47 cm, with interruption lever D 900 5023/8" a material connection
For the "Karalon" paint roller, extendable, length 95 - 140 cm, D 900 503with an interruption lever. 3/8" a material connection
Length 10 m, 12.5x3 mm, particularly suitable for paint rollers D 740 007
"Karalon" paint roller
Material pressure hose
Feed rod
Telescopic feed rod
Application / Article
Rolling dispersion paints
Spray pipe ● Handy model, can therefore also be used forconfined spaces, e.g. in entrance halls.
● For thick materials, such as dispersion paints,mineral and resin plaster
● Material connection with a claw coupling● V 2 A steel nozzles with 2 mm air bore holes.
● Mass-produced with a 6.5 mm nozzle. Setmodel in a systainer with 4.5/6.5/8.5/10.5 mmnozzles, cleaning brush.
● Material and air shut-off valve.
Type Length Air requirem. Weight Art. No.
mm l/min. kg
Spraying pipe 330 330 300 1.2 D 900 514
Spraying pipe 215 215 300 0.9 D 900 521
Spraying pipe 215 set 215 300 0.9 D 900 621
Accessories
Nozzles 2 mm air borehole Art. No. 1 mm air borehole Art. No. Ø mm Ø mm
4.5 B 030 175 4.5 B 030 189
6.5 B 030 176 6.5 B 030 186
8.5 B 030 177 8.5 B 030 187
10.5 B 030 178 10.5 B 030 188
Slotted nozzle B 030 179
For spraying walls and ceilings of up to 3 m in height Length 800 mm D 900 525
Length 1,200 mm D 900 528
Work made easy in corners and narrow spaces, 70° angle D 900 527
V 2 A steel self-sealing pressure plate provides evenpressure distribution in the Sprayboy. With ball for automatically lockingthe empty vessel, therefore no false air enters the material hose. B 012 087
Length: 8 m, material hose: 19x4 mm, Compressed air hose: 9x3mmMaterial connection with screw connection. D 740 052
Material pressure plate
Multi-purpose material hose
Spray pipe extension
Spraying angle
Spraying plaster
Schneider Druckluft 103
Waste gun
Art. No. Price E
A) B)● For removing graffiti and old coats of paints on furniture
prior to restoration● For application on wood, concrete, clinker, plaster and sandstone D 900 480● Considerably faster than traditional cleaning with a paint-brush● Performance improved by up to 60% per square metre● Easier and more even coverage, even in
awkward places and recesses● Practical operation with a gel bottle that can be directly screwed on● Also in vertical surface areas, no delay in the waste gel● Included in the delivery: gun, 1 bottle of waste gel
● Technical specifications:Air requirement 150-180 l/min.Working pressure 4-6 barWeight (gun) 0.35 kg
Waste gel(Contents 1000 ml) B 323 556
Removing graffiti, furniture restoration
Special devices
Art. No. Application / Article
Art. No. Price E
A) B)
For rationally whitewashing cellar rooms, wash houses, D 900 513
stables ... For use with Sprayboy for large surface areas.Air requirement 100 l/min., Working pressure 2–4 bar.Included in the delivery: Whitewashing lance (3/8" a material connection),Aluminium pipe: 420 mm long, 10 m PVC hose Ø 9 mm.
Whitewashing equipment
Whitewashing
Art. No. Price E
A) B)
For Sprayboy and pressure jet guns.Consisting of material and compressed air hoses with connection couplings.
Hose length 5 m D 740 009Hose length 10 m D 740 010
Art. No. Price E
A) B)
● Particularly good jet effect at a working pressure of 7 bar. D 030 034Grit supply with 1-2 bar pressure
● Technical specifications:Air requirement: 300 l/minWeight 0,66 kgØ 5 mm nozzles.
Replacement nozzle for pressure jet gun B 030 028
Pressure jet gun
Jet hose unit
Sand blasting
Spraying lance
Extension pipe
Material pressure hose
Art. No. Price E
A) B)
For many liquids to be sprayed such as wood preservative,
wallpaper solvent, for disinfecting and preserving. D 900 512With universal nozzle, manual valve and fixing facility for the shut-offvalve. 3/8" a material connection
For brass spraying lances, straight model, length 750 mm B 900 512
Length 10 m, 9x3 mm. Resistant to thinning agents. D 740 006
Spraying, disinfecting, preserving, cleaning
Versatile applications andareas of use - perfect solutionsfrom Schneider Druckluft.Versatile nozzles for carefulblowing. For spraying, for sea-ling various materials ... ever-ything's there!
Blow guns, jet guns,cartridge guns, spray guns
An exceptional assortment.
Schneider Druckluft104
Schneider Druckluft 105
Blowing guns
● Handy gun form.● Light metal model
Blowing gun ● BM-S: very quiet. The deeperblowing borehole can not be blocked
Common features● Exact dosing of the compressed air by means of
the continuous usable outlet lever.
Vario S:● Very quiet because of the silent nozzle● Nozzle with anti-blockage function. Air current
can not be blocked by attaching the nozzleVario L:● Particularly suitable for awkward places
because of its 300mm long blast pipeVario V:● 100 % more air with the Venturi nozzle
Blowing gun
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
Vario-P q 380 8 0.12 D 740 144
Vario S w 240 4 0.14 D 740 140
Vario L e 380 8 0.16 D 740 141
Vario F r 420 5 0.10 D 740 142
Vario V t 380 8 0.14 D 740 143
● Light metal modelBlowing gun ● 100 mm extension
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
with extension 70 - 120 2 - 6 0.14 D 740 021
without extension 70 - 120 2 - 6 0.10 D 740 020
w
e
r
t
q
● Handy blowing equipment for small blowingwork.
Blowing gun ● Flexible with its 3 m spiral hose
Type Air requirem. Working press. Weight Art. No.
l/min. bar kg
Soft 170 6 0.18 D 740 035
w
● No cold hands thanks to the fully plasticcasing
Vario F:● With the flat jet nozzle, particularly suitable for
large surface areas● Very quiet with its silent nozzle● Nozzle with anti-blockage function. Air current
can not be blocked by attaching the nozzle.Vario P:● Specially for sensitive surfaces. Nozzle point
with detachable rubber covering preventsraspers
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
BM-SN mit Stecknippel
For quick coupling q 120 1 - 10 0.26 D 740 015
BM-S with safety nozzle w 335 1 - 15 0.28 D 740 145
BM-SNV with plug-in nozzle and 100mm extension 120 1 - 10 0.31 D 740 115
BM-T6 with a nozzle for Ø 6 mm hose 120 1 - 10 0.26 D 740 016
BM-T9 with a nozzle for Ø 9 mm hose 120 1 - 10 0.26 D 740 017
q
106 Schneider Druckluft
Type Air requirem. Working press. Material press. Weight Art. No.l/min. bar bar kg
DSG 5 250 - 300 5 - 8 0.5 - 2 26 D 040 062
DSG 10 250 - 300 5 - 8 0.5 - 2 27 D 040 096
Replacement nozzle B 030 028
Blasting guns
● Pore-deep rust removal.● Dust-free blast fix with dust collection bag, in
which the grit for re-use is collected. With 4attachment nozzles for various applications.
Blasting gun ● For grit with grains of up to 0.8 mm.
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
Blast fix 150 6 0.64 D 030 030
Dust-free 150 6 0.80 D 030 036
Accessories Blast fix Blast fix Art. No.dust-free
Replacement nozzle ● ● B 030 030
Assortm. of replacem. attachm. nozzles 4 pieces for various applications ● B 030 029
● With hardened jet nozzle 5 mm Ø and a metalvacuum cup with bayonet locking.
● For grit with grains of up to 0.8 mm.
Blasting gun ● Particularly efficient because of the conic airnozzle with automatic material entrainment.
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
SAV 280 7 0.80 D 030 025
Replacement nozzle B 030 026
Vacuum cup B 030 027
● New: With hard metal jet nozzle 6 mm Ø.Blasting gun ● For grit with grains of up to 0.8 mm.● Mass-produced with a vacuum cup (1 l)
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
SAW 4 320-400 7 0.88 D 030 260
Replacement nozzle for SAW 4 B 030 399
Replacement nozzle for SAW 3 B 040 034
Replacement nozzle for SAW 2 B 040 035
● Zinc-plated 24 l vessel with all safety fittings.● Water separator at the air input and pressure
reducer for setting the material pressure.● For grit with grains of up to 0.8mm.
Pressure blasting device ● Included in the delivery: Pressure vessel,blasting hose unit, pressure blasting gunThe length of the blasting hose unit includes:DSG 5: 5 mDSG 10: 10 m
● Stable plastic casing D 770 121● Large, interchangeable glass view window● Neck protection● Weight: 0.45 kg
Attachment pane (acetate) G 526 002Attachment glass (mineral glass) G 526 003
● Ground furnace slag, grains of 0.2 - 0.8 mm B 030 031● Harmless to silicosis● Suitable for all listed blasting guns and devices● Plastic tube, contents: 8kg
Blast protection cover
Grit
Schneider Druckluft 107
Cartridge guns / Spray guns
● For common 310 ml cartridgesCartridge gun ● Bleeding started by releasing the outlet yoke
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
KA 310 50 7 0.7 D 040 120
● KPA 310 DR for 310 ml cartridges,KPA 310 Alu for aluminium and plasticcartridges as well as silicon stacks
¸ Continuous speed control for correctly dosingthe material.
Cartridge gun ● With a quick bleed valve to prevent a trackingdelay of the material.
● Pivotable cartridge holder for easier work
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
KPA 310 DR (without Ill.) 60 10 0.46 D 040 118
KPA 310 Alu 100 8 0.98 D 040 138
● For common 310 ml cartridges.● Medium grip model with optimal grip balance
point for safe guidance of the cartridge gun inevery situation.
● Quick bleeding by releasing the outlet valve inorder to prevent a tracking delay of thematerial.
¸ Continuous speed control for correctly dosingof the material.
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
KP 310 100 8 1.04 D 040 137
● For commercially available silicon stacks with600 ml.
● Continuous speed control for correctly dosingof the material.
Silicon stack gun ● Medium grip model with optimal grip balancepoint for safe guidance of the silicon stack gunsin every situation.
● Quick bleeding by releasing the outlet valve inorder to prevent a tracking delay of thematerial.
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
SP 600 100 8 1.2 D 040 130
● Handy aluminium spray gun.● With material and air quantity control.
Spray gun ● Vacuum cup with a large inlet opening.Easy to clean
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
SM 120 - 220 3 - 6 0.64 D 040 008
Replacement vessel B 040 007
● High-quality spray gun with 0.7 l Hostalenvessel
Spray gun ● Swivelling, material-controlling nozzle head.
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
SE 50 - 150 1 - 10 0.86 D 040 006
● With a connection corresponding to theGardena system for the use of commerciallyavailable water hoses without an adaptor.
Washing andcleaning gun
● Precision metering by separate compressedair and material control.
● Nozzle with rubber protection.
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
WCP 150 6 - 10 0.4 D 030 044
Cartridge gun
Retrieving air independentlyand comfortably - even whenthe filling station is miles away.For inflating motorcycle andcar tyres, bicycles, racing bikeand mountain bike tyres, forblowing up balls, air mattres-ses and dinghies... SchneiderDruckluft also produces gau-ged devices. There, the pres-sure is right!
Tyre pressure gaugesSo that the pressure is right.
Schneider Druckluft108
Schneider Druckluft 109
Tyre pressure gauges
● Specially for inflating all types of balls with itsmulti-purpose nozzle attachment
● Its particularity is the colour scale used by thepressure gauge to immediately indicate whichball must be inflated with which pressure
Ball inflating gun
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
BFP set 30 2 0.26 D 740 043
Common features:● Robust tradesman model in aluminium.● Pressure gauge 80 mm Ø with rubber protection.● Gauged devices inclusive of gauging charges● Connection hose with rotary adjustment
Tyre pressure gauge ● Gauged devices with overpressure-safepressure gauge and hanging hook.
● Mass-produced equipment:RMG: Double-sided plug-in valve with extensionRMG-K: Rocker arm connector withoutextension
Type Working press. Weight Art. No.bar kg
RMG qqqqq 0-12 0.90 D 004 009
RMG-K w w w w w 0-12 0.70 D 004 011
RMG "gauged" qqqqq 0-12 0.95 D 004 010
RMG-K "gauged" wwwww 0-12 0.80 D 004 014
● For inflating bicycle tyres with all availablevalves, car tyres, balls, air mattresses,dinghies ...
● Pressure gauge with rubber protection● With outlet valve for reducing excess tyre
pressure
Tyre pressure gun ● Mass-produced with bicycle adapter and multipurpose "ball hollow needle / boat nipple"nozzle. If the multi-purpose nozzle isunscrewed, the ball hollow needle emergesfrom the boat nipple
● Also included in the delivery:a spiral hose 6 x 1 mm, length 3.5 m
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
Multi-purpose set 50 10 0.24 D 100 013
● Pressure gauge with rubber protection● Mass-produced with a multi-purpose nozzle
attachment and spiral hose 6 x 1 mm,length 3.5 m
Type Working press. Weight Art. No.bar kg
RM qqqqq 7 0.40 D 040 011
RM "gauged" w w w w w 10 0.42 D 004 017
Nozzle attachment set B 040 160
● Pressure gauge 63 mm Ø with rubber protection.● Straight plug-in valve.
Tyre pressure gauge ● RM (ungauged model) mass-produced with 3interchangeable nozzle attachments for inflatingnormal bicycle tyres, racing bicycle andmountain-bike tyres, motorbike and car tyres,balls, air mattresses, dinghies...
suitable for
RM, RM "gauged", RMG-M "gauged" B 040 013
RMG-K, RMG-K "gauged" B 040 016
RMG, RMG-K G 402 501
RM G 401 465
AccessoriesStraight plug-in valveRocker arm connectorReplacem. press. gauge (not gauged)
q
w
q
w
110 Schneider Druckluft
Air accumulators
Airboy II ● Portable, compressor-independentcompressed air vessel.
● For filling external compressors or fillingstations.
● Maximum air input pressure 8 bar
● Ideal for inflating tyres, for all blowing work andfor airbrushing,especially in connection with thebasis set
● Complete with pressure reducer, pressuregauge and quick coupling.
Type Vessel vol. Max. pressure Weight Art. No.l bar kg
Airboy II 6 8 4.74 D 040 083
● Mobile, compressor-independent compressedair vessel.
● For filling external compressors or filling station.
Air accumulator ● Complete with pressure gauge for vesselpressure, pressure reducer with pressuregauge for setting the working pressure, quickcoupling and a connection for inflating with acompressor
● Maximum air input pressure: 10 bar
Type Vessel vol. Max. pressure Weight Art. No.l bar kg
Air accumulator 20 10 11 D 040 087
Type Connection Art. No.
EV 15 - R 1/2" - FV G 1/2"i E 800 601
● Hanging facility for fillingthe air accumulator and the RMG 10-6.
● For wall fastening. Wall distanceto the filling nipple: 155 mm.
End distributor socket withfilling valve
● Connection to the pipe system Ø 15, 18 and22 mm is possible.
● Additional quick coupling for full pressure.
● Specially for garages, services andworkshops.
● Impact-protected pressure gauge withunbreakable see-through glass.
Filling stationTyre pressure gauge "gauged"
● Maximum air input pressure 15 bar● Tank safety valve prevents overfilling and
possible damage to the pressure gauge.● Price including gauging charges
Type Work. press. Vessel Vol. Dimensions Weight Art. No.bar l WxDxH in mm kg
RMG 10-6 0-12 6 330x210x670 7 D 040 116
A foam gun for removing muckresidue from the car windscre-en and for cleaning the walland floor tiles immaculately inthe bathroom and toilet ...Perfect pipe cleaner for wash-basins, sink bowls, sinks andoutlet pipes...Therefore, cleansing agentsand more. In brief: A lot of use-ful things that people need somuch (daily). Passed the hardtest - in daily practice and atSchneider Druckluft!
Cleaning devices, DIY Enthusiast sets,consumable material...
What you otherwise still need.
Schneider Druckluft 111
112 Schneider Druckluft
Cleaning devices
Applications:● With foam nozzle such as the foam gun● With cleaning hose for rough cleaning of outlet
pipes (of up to 50 mm Ø) to wash-basins,sinks, bath tubs, showers and sink bowls to thesiphon.
Foam and spray gun● With flat and arch-type nozzles for cleaning and
disinfecting overflows and WCs● Mass-produced with foam nozzle, cleaning
hose, flat and arch-type nozzles
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
SSP 60 1-3 0.41 D 900 477
Applications:● For rough cleaning of outlet pipes of up to
60 mm Ø behind wash-basins, sinks, sinkbowls
● Water connection via a Gardena plug system
Pipe-less gun● The 5 m long cleaning hose is deeply
embedded in the wall. Therefore, the cleaningpower of the water is strengthened again andagain by pulsating air puffs and thus itselfdissolves the most persistent blockages in aflash
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
PLG 30-60 3-5 0.45 D 900 476
Applications:● For removing persistent sediments in outlet
pipes within flats and houses.● Included in the delivery: 1 l bottle of pipe
cleaner
Pipe cleaning set● The 5 m long spraying hose is introduced into
the blocked pipe until it meets with theresistance of the sediment. Spray with pipecleaner and after a few minutes of residencetime, the blockage shall be effectively removed.
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
PCP set 40-60 3-4 0.60 D 900 481
● All cleansing agents are biodegradable at 98%according to EC directive.
● Universal cleaner: destroys greases andorganic substances on an alkaline base.
● Limescale cleaner: removes limescale in thebathroom, kitchen and WC. Ideal for showerheads and fittings.
Cleansing agents ● Upholstery cleaner: for home and the car-removes stains and provides fresh colours.
● Insecticide: removes impurities from glass,paint, chrome and plastic
● Stain remover: Efficiently removes brake dustas well as oil, grease and dirt stains.
● Pipe cleaner: extra powerful for undiluted use,even removes persistent, encrusted stains andsediments.
Type can be used with Contents Art. No.SP SSP PCP set ml
Universal cleaner ● ● 1000 B 323 553
Limescale cleaner ● ● 1000 B 323 552
Upholstery cleaner ● ● 1000 B 323 551
Insecticide ● ● 1000 B 323 554
Stain remover ● ● 1000 B 323 555
Pipe cleaner ● 1000 B 323 557
Applications:● The multi-purpose cleaning device at home and
in the car.● For cleaning and disinfecting wall and floor tiles
in the kitchen, bath/shower, WC, wash house,workshop. Removes limescale and mouldstains. Also for cooker hoods, grill trays,hanging planes, etc.
Foam gun● For removing stains from upholstery and
carpets and for cleaning vehicle interiors.● For removing insects from front sections and
windscreens in vehicles.● For removing aggressive brake dust from
stains before winter or summer storage.
Type Air requirem. Working press. Weight Art. No.l/min. bar kg
SP 60 1-3 0.41 D 900 478
Schneider Druckluft 113
DIY Enthusiast sets As an introduction: Complete set.Combined devices for multi-purpose applications with an advantageous
price. Type Consisting of: Art. No.
Junior set Tyre pressure gauge RM with 2 nozzle attach- D 100 005ments for bicycles and balls (see page 110),blowing gun, spiral hose 8x1 mm, 5 m long
Type Consisting of: Art. No.
Hobby set II Tyre pressure gauge RM with 2 nozzle attach- D 100 001ments for bicycles and balls (see page 110),blowing gun, spray gun, paint spray gun andspiral hose 8x1 mm, 5 m long
Thickener Contents Packaging Art. No.unit piece
Loctite 243 bolt retaining device q 50 ml 1 E 771 135 For sealing and securing metal 5 mg 1 E 771 126 screws for medium loads
Reel of sealing tape (PTFE) w 12 m 1 E 771 125
12 mm wide, 0.1mm thick 12 m 10 E 770 125
Leak detector spray e 125 ml 14 E 770 128 For finding micro-fine leakage points in compressed air installations. FCKW-free.
Self-packaged articles for the shop shelf
Compressed air devices / Accessories
Consumable material
Lubricants / Oil Special oil for use in Contents Art. No.l
Mobile piston compressors 0.75 B 111 005
Fixed piston compressors 3 B 111 002
Fixed piston compressors 3 B 111 006 (synthetic compressor oil SD 555)
Screw-type compressors 5 B 111 010
Silent Compressors 1 B 770 010
Compressed air tools, mist and line oilers 0.1 E 771 130
1 B 770 000
q w e
Schneider Druckluft GmbH Ferdinand-Lassalle-Straße 43D-72770 ReutlingenTelefon 00 49/71 21/959-0Fax 00 49/71 21/959-151
Not only delivery…Naturally for us, perfect serviceincludes not only delivery,installation and maintenance ofyour compressed air installati-on. We will remain at your sidewith our experience during theplanning of your individualcompressed air solution andadvise you on all questionsregarding the subject of com-pressed air.
Do you have any questions orrequire detailed information material?Call us at
Or fax us at:
You can send us an e-mail at:
You will find us on the Internet at:
The complete service fromSchneider Druckluft
00 49/71 21/959-0 Head Office
00 49/71 21/959-222 Sales
00 49/71 21/959-244 Service
00 49/71 21/959-151
www.schneider-druckluft.com
Gedr
uckt
auf
chl
orfr
ei g
eble
icht
em P
apie
r. Te
chni
sche
Änd
erun
gen
und
Irrtu
m v
orbe
halte
n. A
pril
2003
/ G 5
99 0
02