Code : STM#120Code : STM#120
Samsung Electronics Co., Ltd.
OfficeServ 7200 Hardware DescriptionOfficeServ 7200 Hardware Description
Distribution
EnglishED01
© Samsung Electronics Co., Ltd. 2
ContentsContents
Cabinet and Power Supply Cabinet and Power Supply
Processor ModulesProcessor Modules
Voice Trunk ModulesVoice Trunk Modules
Subscriber StationsSubscriber Stations
Data ModulesData Modules
TerminalsTerminals
© Samsung Electronics Co., Ltd. 3
Cabinet and Power SupplyCabinet and Power Supply
© Samsung Electronics Co., Ltd. 4
Cabinet ConfigurationCabinet Configuration
MCP only8TRK,DLI,SLI,HYBWLI,MGI,WIM,4DSL
8TRK,DLI,SLI,HYBWLI,MGI,LIM,4DSL
8TRK,DLI,SLI,HYB,LIMTEPRI,WLI,MGI,4DSL
8TRK,DLI,SLI,HYB,LIMTEPRI,WLI,MGI,4DSL
8TRK,DLI,SLI,HYB,LIMTEPRI,WLI,MGI,4DSL
LCP only8TRK,DLI,SLI,HYBWLI,MGI,WIM,4DSL
8TRK,DLI,SLI,HYBWLI,MGI,LIM,4DSL
8TRK,DLI,SLI,HYB,LIMTEPRI,WLI,MGI,4DSL
8TRK,DLI,SLI,HYB,LIMWLI,MGI,4DSL
8TRK,DLI,SLI,HYB,LIMWLI,MGI,4DSL
Expansion Cabinet
Access Cabinet
© Samsung Electronics Co., Ltd. 5
continuecontinue
Rear Side Configuration of Cabinet Function
External Rectifier Socket External DC power supply socket for PoE.
Power Switch Turn on/off the OfficeServ 7200 power.
Power Connection Connector between Basic Cabinet and Extension Cabinet
The connector to supply the supplied power to the external cabinet.
Power Input/Output Connector The connector to connect power cable.
AC LED LED is turned on when AC power is entered.
DC LED LED is turned on when DC power is properly output.
Battery Connection Socket The socket to connect the external battery.
© Samsung Electronics Co., Ltd. 6
PSU (Power Supply Unit)PSU (Power Supply Unit)
Features1 PSU per chassis
Mounted on back plane
Supports 80 devices per chassis
Power is controlled by a thermal sensor
After 24hrs of cooling fan failure, PSU will stop !
© Samsung Electronics Co., Ltd. 7
Processor BoardsProcessor Boards
© Samsung Electronics Co., Ltd. 8
MFM
RCM
MIS
MCP (Main Control Unit)MCP (Main Control Unit)
FeaturesInstalled in slot 0 of main chassis
256 time slot switch matrix
1x smart media card slot
3x daughter module positions
Memory backup switch
8 position DIP switch
1x internal MOH source• MFM : Multi-Frequency Module • RCM/RCM2 : R2 CID Module• MIS : Miscellaneous
© Samsung Electronics Co., Ltd. 9
continuecontinue
Capacity without Option board
Capacity with Option board
Items Specification
No. of DTMF sender
No. of DTMF receiver 4 channels
Items No. of channel
No. of DTMF sender Non limit
No. of DTMF receiver 16 channels
No. of R2/CID receiver 14 channels
No. of R2 sender 29 channels
Items No. of channel
External music on hold 2 channels
Internal music on hold 1 channel
External page 1 channel
External loud bell 1 channel
External page dry contact 2 channels
Common dry contact 1 channel
© Samsung Electronics Co., Ltd. 10
DIP SWITCH USE on the OS7200 MCP
ON (left) OFF (right)
4 Digit Trunk Numbers SW8 3 Digit Trunk Numbers
4 Digit Station Groups SW7 3 Digit Station Groups
4 Digit Station Numbers SW6 3 Digit Station Numbers
SW5 Reserved
Country Select SW4 Country Select
Country Select SW3 Country Select
Country Select SW2 Country Select
Country Select SW 1 Country Select
4 3 2 1 Country
OFF OFF OFF OFF Korea
OFF OFF OFF ON USA
OFF OFF ON OFF UK
OFF OFF ON ON Italy
OFF ON OFF OFF Australia
OFF ON OFF ON New Zealand
OFF ON ON OFF Holland
OFF ON ON ON Denmark
continuecontinue
Sets DIP switch
S3
S2
CHARGEOff
© Samsung Electronics Co., Ltd. 11
continuecontinue
Front View
Ports & LEDs Function Description
LINK1~LINK3 Ports that connect the MCP with the LCP.
MISC1~MISC2 Ports that connect external music sources, paging device, loud bell, common bell, or door bell.
SmartMedia Port for installing the NAND-type flash memory.
LAN Port for establishing the 10/100 BASE-T Ethernet connection.
SIO UART port (for tests).
RST Button for resetting the MCP board.
RUN LED- Off: Power is not connected.- On: Booting- Blink: The Program is operating properly
LAN LED- Off: MCP is not connected to LAN.- On: MCP is connected LAN.- Blink: MCP is transmitting or receiving Data through LAN port.
SM LED- Off: The Smartmedia is not installed.- On: The SmartMedia is installed, however is not accessed.- Blink: The SmartMedia is installed and is being accessed.
LCP LED- Off: There’s no message exchange between MCP and LCP.- On: Messages are being sent/received to/from the LCP.
© Samsung Electronics Co., Ltd. 12
Daughter boards for MCPDaughter boards for MCP
MFM (Multi-Frequency Module)Installed in any position on MCP module
Only 1 per system
12 DSPs for DTMF and tone detection
© Samsung Electronics Co., Ltd. 13
continuecontinue
RCM (R2 CID Module)Installed on MCP module
Only 1 per system
RCM1R2 signalling send (30 channels) and receive (8 channels) or CID
detection (14 channels) by DIP switch on RCM.
RCM2R2 signalling send ( channels) and receive (8 channels) or CID detection
(14 channels) by DIP switch on RCM.
© Samsung Electronics Co., Ltd. 14
continuecontinue
MISC (Miscellaneous)Installed on MCP
Only 1 per system
2x external MOH
1x external page
1x loud bell
1x common bell
1x dry contact
© Samsung Electronics Co., Ltd. 15
continuecontinue
Dry contact #1(For common bell)
Dry contact #3(For external page)
External Page Equipment
Additional Page Equipment
MISC 1
MISC 2
Dry contact #2(For external page)
© Samsung Electronics Co., Ltd. 16
LCP (Local Control Processor)LCP (Local Control Processor)
FeaturesInstalled in slot 0 expansion chassis
3x link cable RJ45 ports, for connection to MCP
2x status LEDs
© Samsung Electronics Co., Ltd. 17
continuecontinue
Front View
Ports & LEDs Function
LINK1~LINK3 Ports that connect the MCP with the LCP.
SIO UART port(for tests).
RST Button for resetting the LCP board.
RUN LED This LED indicates the status of the LCP.- Off: Power is not connected.- On: Booting.- Blinking: Program in operation.
MCP LED This LED indicates the status of signaling message processing. - Off: There’s no message exchange between MCP and LCP.- On: Messages are being sent/received to/from the MCP.
© Samsung Electronics Co., Ltd. 18
Voice Trunk ModulesVoice Trunk Modules
© Samsung Electronics Co., Ltd. 19
Voice Trunk Module (TEPRI)Voice Trunk Module (TEPRI)
FeaturesSame as OS500 operation.
Only installed in slots 3 – 5 of Access cabinet or slot 3 of Expansion cabinet.
T1/E1 signals by programming.
Resistor Terminations for T1 line(100 W) and E1 line(120 W).
8 position DIP switch.
© Samsung Electronics Co., Ltd. 20
continuecontinue
DIP switch SettingTEPRI Module DIP SWITCH Settings
Switch No. ON OFF Description
1 T1 E1 Selects whether T1 or E1
2 PRI T1 or E1 Selects whether PRI or not
3 Not used
4 NETWORK USER Select Network or User
5 Not used
6 Not used
7 Not used
8 Always ON This switch must always be ON as it is used for Card ID
Switch Settings for PRI/E1 operation
Switch No. PRI Operation E1 Operation 1 OFF OFF 2 ON OFF 3 OFF OFF 4 OFF ON for Master OFF for
Slave (Note) 5 OFF OFF 6 OFF OFF 7 OFF OFF 8 ON ON
Note: When networking OS7200 systems one system must be designated the master (NETWORK) and the other the slave(USER)
© Samsung Electronics Co., Ltd. 21
continuecontinue
Front ViewRST
TEPRI
T1/E1/PRI SIO
SYNC ASI IPC TP1
LOS L2 CLK TP2
Ports & LEDs Function Description
T1/E1/PRI Ports that connect the T1/E1/PRI cable.
SIO UART port (for tests).
RST Button for resetting the TEPRI board.
SYNC LED - On: Clocks are not synchronized when they interwork with the counterpart station.- Off: Clocks are synchronized when they interwork with the counterpart station.
LOS LED - On: Signals have been lost.- Off: Signals have not been lost.
AIS LED - On: The remote alarm has been generated.- Off: The remote alarm has not been generated.
L2 LED - On: The PRI Layer2 is operating properly. - Off: The PRI Layer2 is operating abnormally.
IPC LED - On: The board is interworking with the MCP/LCP.- Off: The board is not interworking with the MCP/LCP.
CLK LED - On: The board has received the synchronization clock from the counterpart station.- Off: Using synchronous clock for internal clock.
TP1 LED - This LED turns on once the T1 is established.
TP2 LED - This LED turns on once the PRI is connected.
© Samsung Electronics Co., Ltd. 22
Voice Trunk Module (8TRK)Voice Trunk Module (8TRK)
Features8 trunk loop start module
8 caller ID path support
Performs Polarity Reverse Sensing (PRS), (Option)
Performs Metering Pulse Detection (MPD), (Option)
© Samsung Electronics Co., Ltd. 23
continuecontinue
Pin Assignment
P1-P8 Port(RJ-45)(RJ-45)
Pin No. 1 2 3 4 5 6 7 8
Function - - - C.O. TIP C.O. RING - - -
© Samsung Electronics Co., Ltd. 24
continuecontinue
Front View
8TRK
P1
P5
P2
P6
P3
P7
P4
P8
P1
P5
P2
P6
P3
P7
P4
P8
Ports & LEDs Function Description
P1~P8 Trunk ports.
P1~P8 LED These LEDs indicate the status of the ports.- Off: The trunk line is not being used.- On: The trunk line is being used.- Blink: The ring is being connected.
© Samsung Electronics Co., Ltd. 25
Voice Trunk Module (4BRI)Voice Trunk Module (4BRI)
Features8 ISND2 channels
Slots 1 – 5 of any cabinet
Max 10 cards – 80 channels
© Samsung Electronics Co., Ltd. 26
continuecontinue
Front View
4BRI
P1-T
RUN
P2-T P3-T P4-T
P1-S P2-S P3-S P4-S
ACT
Ports & LEDs Function Description
P1-T~P4-T Office (trunk) Port
P1-S~P4-S Internal (station) Port
RUN LED 4BRI Board Operation Status- Off: 4BRI board is abnormal or power is disconnected- On: 4BRI board is properly operated.
ACT LED 4BRI Board LAYER1 SETUP Status- Off: LAYER1 SETUP Abnormal- On: LAYER1 SETUP Normal
© Samsung Electronics Co., Ltd. 27
MGI (Media Gateway Interface)MGI (Media Gateway Interface)
FeaturesMGI2 – carrier module has NO MGI channels
MGI2 daughter modules added to provide 4 – 16 channels.
Installed in any subscriber slot.
G.729,G.723.G.726.G.711
© Samsung Electronics Co., Ltd. 28
continuecontinue
Option boardOption board provide 4 channels.
Option4
MGI2D
Option3
MGI2D
Option2
MGI2D
Option1
MGI2D
© Samsung Electronics Co., Ltd. 29
Subscriber StationsSubscriber Stations
© Samsung Electronics Co., Ltd. 30
Analog Station (8/16SLI)Analog Station (8/16SLI)
FeaturesSLI (Subscriber Line Interface)
FunctionsRing generationDTMF/Dial pulse detectionHook on/off detectionTone generation
Board types8 SLI : 8 SLI ports16 SLI : 16 SLI ports16 MWSLI : 16 SLI with message wait
Power fail transfer relays
© Samsung Electronics Co., Ltd. 31
continuecontinue
Front View
8SLI
P1
P5
P2
P6
P3
P7
P4
P8
P1
P5
P2
P6
P3
P7
P4
P8
Ports & LEDs Function Description
P1~P8 Station ports for analog phones.
P1~P8 LED orP1~P16 LED
These LEDs indicate the operation status of the ports.- Off: The station is not being serviced.- On: The station is being serviced.
16SLI
P1/P9 P1P9
P2/P10 P3/P111
P4/P12
P5/P13 P6/P14 P7/P15 P8/P16
P2P10
P3P11
P4P12
P5P13
P6P14
P7P15
P8P16
© Samsung Electronics Co., Ltd. 32
continuecontinue
Pin Assignment
Pin No. 1 2 3 4 5 6 7 8
Function PFT TIP
PFT RING
- SLI 1 TIP
SLI 1 RING
-
Pin No. 1 2 3 4 5 6 7 8
Function - - - SLI 2 TIP
SLI 2 RING
-
P1 port
Ports from P2 to P8
© Samsung Electronics Co., Ltd. 33
Digital Station (8/16DLI)Digital Station (8/16DLI)
FeaturesDLI (Digital Line Interface)
Types8 DLI : 8 DLI ports 2B+D16 DLI : 16 DLI ports 1B+D
Max 8 large display phones per module
© Samsung Electronics Co., Ltd. 34
continuecontinue
Front View
8DLI
P1
P5
P2
P6
P3
P7
P4
P8
P1
P5
P2
P6
P3
P7
P4
P8
16DLI
P1/P9 P1P9
P2/P10 P3/P11 P4/P12
P5/P13 P6/P14 P7/P15 P8/P16
P2P10
P3P11
P4P12
P5P13
P6P14
P7P15
P8P16
Ports & LEDs Function Description
P1~P8 orP1~P16
Station ports of Samsung digital phones.
P1~P8 orP1~P16 LED
These LEDs indicate the status of the ports.- Off: The station is not being used.- On: The station is being used.If the LED turns green, it shows that the P1-P8 is being used.If the LED turns red, it shows that the P9-P16 is being used. If the LED turns yellow, it shows that both of the ports are being used simultaneously.
© Samsung Electronics Co., Ltd. 35
continuecontinue
Pin Assignment
Pin No. 1 2 3 4 5 6 7 8
Function - - - DLI 1 DLI 1 -
© Samsung Electronics Co., Ltd. 36
Hybrid Station (8HYB/8Combo)Hybrid Station (8HYB/8Combo)
FeaturesRing generation
DTMF/Dial pulse detection
Hook on/off detection
Tone generation
Specifications 8 SLI ports
8 DLI ports
© Samsung Electronics Co., Ltd. 37
continuecontinue
Front View
8HYB
P1/P9 P1P9
P2/P10 P3/P11 P4/P12
P5/P13 P6/P14 P7/P15 P8/P16
P2P10
P3P11
P4P12
P5P13
P6P14
P7P15
P8P16
Ports & LEDs Function Description
P1~P16(8HYB)P1~P16(8COMBO)
Station ports of Samsung digital phones.
P1~P16 LED(8HYB)
These LEDs indicate the status of the ports.- Off: The station is not being used.- On: The station is being used.If the LED turns green, it shows that the P1-P8 is being used(Analog phone port).If the LED turns red, it shows that the P9-P16 is being used(Samsung digital phone port). If the LED turns yellow, it shows that both of the ports are being used while being connected to an analog phone and Samsung digital phone simultaneously.
© Samsung Electronics Co., Ltd. 38
continuecontinue
Pin Assignment
Pin No. 1 2 3 4 5 6 7 8
Function - - - SLI 1 TIP/DLI
SLI 1 RING/DLI
-
© Samsung Electronics Co., Ltd. 39
Voice Mail System (SVMi-20E)Voice Mail System (SVMi-20E)
FeaturesSame position rules as station modules
Default card has 4 ports
Scalable to 20 ports?
Modem daughter card (and yes, it works!)
© Samsung Electronics Co., Ltd. 40
continuecontinue
Front ViewLAN SIO
VM1 VM2 VM3 HDD
LAT LRT SDN PGD
SVMi-20E
RST
Part Description
LAN Interface Connector The LAN interface connector is used for data transmission and database backup. It is also called as ‘LAN connector’ and mainly used for system file transmission (backup and restore)SVMi-20E backs up or restores data by using LAN provided by customer or by connecting to laptop computer or PC connected the relevant LAN connector.
Serial Interface Connector Used to connect to PC.
Reset Button(RST) If pushing this button, SVMi-20E system starts and the call in progress is disconnected.
LED(Light Emitting Diode)
VM1 When one or more ports are hooked on/off in the first 4 ports(1~4), it blinks.
VM2 When one or more ports are hooked on/off in the second 4 ports (5~8), it blinks.
VM3 When one or more ports are hooked on/off in the final 4 ports(9~12), it blinks.
HDD If accessing to the hard disk driver, LCD blinks.
LAT When the LAN port is run, LED is turned on into green color.
LRT When transmitting data to LAN, LED is turned on into orange color.
SDN This LED displays the system status. When the system driver is loaded, LED is turned on into red color, and if the loading is terminated, LED is turned into green color.
PGD If the system power is normal, LED is turned on into green color.
© Samsung Electronics Co., Ltd. 41
Data ModulesData Modules
© Samsung Electronics Co., Ltd. 42
Router Module (WIM)Router Module (WIM)
FeaturesWIM : WAN Interface Module
FunctionsOnly 1 per systemOnly installed in slot 1 of main chassis1x LAN port2x WAN ports (RJ45)1x WAN port (V.35 serial)1x DMZSIO for configurationWIMD – daughter board for VPN
© Samsung Electronics Co., Ltd. 43
continuecontinue
Front View
WIM
DMZ
WAN1
LAN
WAN2
SIO
SERIAL
RUN DMZ LAN
SERIALL
WAN1
WAN2
RST
Ports & LEDs Function Description
DMZ Internal port that does not need firewalls
LAN Ethernet port connected with the Intranet
SERIAL Port that connects the serial dedicated line that interworks with the V.35
WAN1, WAN2 WAN interface port that interworks with Ethernet of 10/100 BASE-T
SIO UART port(for tests)
RST Button for resetting the WIM module
RUN LED - Off: The WIM board is in an abnormal status or the power is not being supplied.- On: The WIM board is operating properly.
DMZ LED - Off: The link is not connected.- On: The link is operating.
SERIAL LED - Off: The link is not connected.- On: The link is operating.
WAN1, WAN2 LED - Off: The link is not connected.- On: The link is operating.
LAN LED - Off: Link is not connected- On: Link is in operation
© Samsung Electronics Co., Ltd. 44
continuecontinue
WIM to LIM connection
Using the Ethernet port of the front panel,
Through back panel, connect with the LIM board of slot 2.
The Method of LAN port connection• Managed LIM : Slot2 LIM with WIM• Unmanaged LIM : Slot 3,4,5
© Samsung Electronics Co., Ltd. 45
Switch Module (LIM/PLIM)Switch Module (LIM/PLIM)
LIM : LAN Interface Module
FeaturesInstalled in slots 2 ~ 5 of any chassis
Max 8 per system (128 ports)
When in slot 2 of main chassis it’s a managed switch
If in any other slot it’s unmanaged
16x 10/100 base T Ethernet ports
PLIM provides the Power over Ethernet (PoE) function
FunctionsDetects 10/100 BASE-T, or full/half duplex automatically.
Offers the VLAN for supporting QoS.
Functions as a switching hub.
© Samsung Electronics Co., Ltd. 46
continuecontinue
Front View
LIM
P1
P5
P2
P6
P3
P7
P4
P8
P9
P13
P10
P14
P11
P15
P12
P16
Ports & LEDs Function Description
P1~P16 Ports for connecting the Ethernet.
Left LED of each port The LED indicates if the link is operating.- Blink: The link is operating.
Right LED of each port The LED indicates if the port of 10/100 BASE-T is operating.- Off: The port of 10 BASE-T is operating.- On: The port of 100 BASE-Tx is operating.
© Samsung Electronics Co., Ltd. 47
Wireless ModulesWireless Modules
© Samsung Electronics Co., Ltd. 48
Voice Application Module (4WLI)Voice Application Module (4WLI)
WLI : Wireless Line Interface
Features
FunctionsVoice decompression: G.711, G.729
Wireless specification: 802.11b WLAN
SpecificationsUp to four APs.
Simultaneous calling through up to four channels per AP.
The maximum number of mobile station subscribers is 120.
© Samsung Electronics Co., Ltd. 49
continuecontinue
Front View
4WLI
P1 P2 P3 P4
RUN
SW1 SW2 SW3
SIO
Ports & LEDs Function Description
P1~P4 Port that connects with the WBS24.
SIO UART port (for tests).
RUN LED This LED turns on when the wireless LAN operates.
SW1~SW3 LED This LED turns on when the software task operates.
© Samsung Electronics Co., Ltd. 50
TerminalsTerminals
© Samsung Electronics Co., Ltd. 51
Digital PhonesDigital Phones
DS-24SE
DS2000 Series
DS-3020S
DS4000 Series DS5000 Series
DS-5012L
DS-5038D
DS-5014D
DS-5021D
© Samsung Electronics Co., Ltd. 52
IP PhonesIP Phones
ITP5000 Series
ITP-5012L
ITP-5021D
ITP-5014D
ITP5100 Series
ITP-5107S
ITP-5114D
ITP-5121D
ITP-5112L
© Samsung Electronics Co., Ltd. 53
AP (Access Point)AP (Access Point)
ConfigurationWBS24 Basic
WBS24 Combo
WIP PhoneWIP Phone
PDASoftPhone
Laptop PC
MGIMCP LIM
WIM LIM
RJ45 RJ11
AC POWER
LIM-MGI
PC
WIP PhoneWIP Phone
PDASoftPhone
Laptop PC
MCP WLI
WIM PLIM
RJ45 RJ11
WLI PC
RJ45
LIMCoverage = 30m
Data
Data
© Samsung Electronics Co., Ltd. 54
WLAN PhonesWLAN Phones
Configuration
© Samsung Electronics Co., Ltd. 55
Add on ModuleAdd on Module
FeaturesStation module type of digital phone where the programmable buttons and LEDs are expanded.
AOM Types Connectable Phones
DS-5064B AOM DS-5000 series digital phone
DS-4014 AOM DS-4000 series digital phone
DS-4064 AOM
DS-24SE AOM DS-24SE digital phone
DS-2024E AOM DS-2000 series digital phone
DS-3020S AOM DS-3000 series digital phone
© Samsung Electronics Co., Ltd. 56
Door Phone Interface ModuleDoor Phone Interface Module
FeaturesDoor Phone Interface Module (DPIM) connects door phones and door open/close devices with the OfficeServ 7200.
© Samsung Electronics Co., Ltd. 57
KDB-D/SKDB-D/S
FeaturesThe KDB-D module is attached to the digital phones connected with the DLI board for use.
The KDB-D enables a digital terminal to use one out of the two B channels received by another digital phone from the DLI board.
Samsung Electronics Co., Ltd.