BONETTIQuality Valves & Level Gauges
Il futuro come tradizione
Our
trad
ition
is th
e fu
ture
CMI Gate Valves
CMI Pasquini S.p.A. originate in 1921 with the establishment
of the firm "Cocard Italiana di Ing. Pasquini & C.". This
company markets in the early years the valves manufactured
by the French company, then starts a manufacturing activity
under licence and year after year a considerable rise in local
production is recorded in comparison with the sales of the
foreign products.
The Second World War has a remarkable influence in this
direction; the previous experience is used in order to develop
their own know-how and that permits the production of valves
designed and manufactured completely in Italy with no more
collaboration with the French company.
In 1950 the company name is "Costruzioni Meccaniche
Industriali già Ing. Gino Pasquini S.p.A." and this trade name
has been maintained also after 1957, that is after the death of
the company founder. In the sixties - the period of the large
industrial expansion in Italy - CMI Pasquini S.p.A. are
becoming very important in the field of valves for heavy duty
on the new thermoelectric, chemical and petrochemical
plants.
We can say without hesitation that CMI Pasquini in those
years have been the only Italian producer in a position to
ensure such products and their continuous development in
accordance with the requirements of the users, which are not
only Italian but also located in foreign countries due to direct
and indirect supplies.
In consideration of product importance, very close contacts
and collaboration with customers have always been
fundamental to verify from the beginning any possibility in the
operating conditions of the plants. That has been and is the
constant policy of CMI Pasquini.
End 1984 - thanks to the partnership of Cesare Bonetti S.p.A.,
leader in Italy and abroad in the field of high quality industrial
valves a new substantial boost is given to modernization of
managing, planning and manufacturing facilities and
methods. In 1992 the Company was merged to Cesare
Bonetti S.p.A. as CMI Pasquini Division.
GATE VALVES
Foreword
BONETTI’s “CMI” series production range consists of:
- Gate valves
- Globe valves, Stop, Stop-Check and Piston Lift Check type
- Check valves, Swing disk, Tilting disk and Testable Swing
Check Pneumatically actuated type;
- Valves for chemical applications.
All valves above listed are suitable for high pressures and
temperatures
The main technical features of these valves have been verified
and optimized during over 90 years of in-house production
and supply to electric power plants, in particular for applications
on boiler feed water, steam shutoff, against back flow as well on
chemical and petrochemical plants.
Details of this long experience can be found in our "Users
Reference List" with indication of valves fitted on thermoelectric
power plants and other installations, where high reliability
under severe operating conditions is a constant requirement.
BONETTI is always assisting its Customers, both End Users,
or Engineering, or EPC Companies, by integrating our own
know-how with that of the customers.
Consequently BONETTI’s CMI production line is continuously
uptodated and meets the highest engineering and quality
levels.
The pressure and temperature values as well the sizes listed
in this bulletin shall not be considered as a limit of the product
range.
We can produce special valves to meet customer's requirements.
BONETTI has successfully supplied CMI series valves
having ratings up to ASME Class 4500, for instance:
- Gate Valves in different sizes for main shutoff of boilers,
manufactured according to interpolated rating ASME
Special Class 2860,
- Gate and check valves in different sizes for super-critical
power plants, manufactured according to rating ASME
Class 4500.
Even the materials listed in this bulletin for bodies, bonnets
and trims shall not be considered as a limit. Bonetti often
manufactures CMI valves in special materials, (like C12A,
F91, F92, etc.) in accordance with special design requirements
at Customer's requests.
02
BONETTIQuality Valves & Level Gauges
CMI SERIES
STANDARDS
Bonetti’s CMI gate valves have been designed, rated, manufactured
and inspected, where applicable, in accordance with the most used
international Standards, namely:
- ASME N & NPT Stamp according Nuclear Section III.
- ASME B16.34 -
Steel valves, Flanged and Butt-welding Ends
- ASME B16.10 -
Face-to-Face and End-to-End Dimensions
- Applicable Sections of ASME Boiler and Pressure Vessel
Code,
- MSS SP 44 Steel pipe line flanges
- MSS SP 61 Hydrostatic testing of steel valves
- API Standard 598 - Valve inspection and test
- ASME B16.25 - Buttwelding Ends
- PED - Pressure Equipment Directive 97/23/EC
- Indian IBR (on request).
- others (on request).
SHIPPING PREPARATION
CMI valves are supplied only after undergoing the prescribed
dimensional and operating inspections.
For storage and shipment valves are adequately protected.
REQUESTS AND ORDERS
To guarantee perfect valve operation please state:
- Size of the valve (DN)
- Fluid
- Design conditions (pressure and temperature) or Rating
- Operating conditions (pressure and temperature)
- Operating �p
- Connections type
- Operating type (by handwheel, actuator, etc.)
- Installation type, that is the orientation of the valve within
the space
- Required materials
- Optionals
- Possible environmental and operating peculiarities.
CMI Gate ValvesThis catalogue describes our gate valves only. The otherSections of Cesare Bonetti’s CMI valves production aredescribed in other publications.
DESIGNLike all gate valves, CMI gate valves are straight through bidirectional flow valves, unless equalizer pipe is installed.
OPERATIONSLike all gate valves, CMI gate valves are for shut-off purposeonly.
CONNECTIONSCMI Gate valves illustrated in this catalogue have the followingpipe connections:- Flanged Ends according to ASME B16.5 (usually for Class 600 Ib only, not for higher pressure Classes) or to different Standard,- Buttwelding Ends according to ASME B16.25 (see pages 30 and 31) or to different Standard.We can supply gate valves with connections different from the above, e.g.: Socket welding Ends to ASME B16.11, or different.
SIZESBonetti’s CMI gate valves are currently manufactured in thesizes from 1.1/2" (DN 40) up to 28" (DN 700).
RATINGSBonetti’s CMI gate valves currently manufactured as standardare suitable for the following Ratings:ASME Class 600 - 900 - 1500 - 2500 - 4500 Standard orSpecial Class; interpolated Classes are also available.Tables showing max operating conditions (pressure and temperature)for Material Code are at page 7 and Rating are onpage 19.We want to point out that Cesare Bonetti’s CMI valves areoverdimensioned with respect to international Standards.Actual max operating conditions can be given on request.
MATERIAL CODECMI Gate valves are manufactured in different Material Codes. For "Material Code" we mean the material quality of the valve components.In the descriptive pages relevant to each valve (page 8 up to18) are clearly indicated the materials used for the moreimportant components and Material Codes.Here below we list the main characteristic elements of the differentMaterial Codes:Exceptionally and compatibly with our moulds and die equipment,some components usually of cast steel can be suppliedof the corresponding forged steel.A Valves can be also supplied in other materials accordingspecial Customer request
The Material Codes having their tag followed by a —Z areSpecial constructions, slightly different from the standardones.
03
Forged Cast Trim andHardfacedSurfaces
Materialcode
Material forBody and Bonnet
Materialcode
Material forBody and Bonnet
71 ASTM A105 CB ASTM A216 WCB Stellite
11 ASTM A182 F11 C6 ASTM A217 WC6 Stellite
22 ASTM A182 F22 C9 ASTM A217 WC9 Stellite
91 ASTM A182 F91 C12A ASTM A217 C12A Stellite
31 ASTM A182 F316 CF8M ASTM A351 CF8M Stellite
23
7
6
4
9
2
1
3
21
Fig. 101
CMI GATE VALVES
ASME Class 600 - 900 - 1500 - 2500 - 4500
Construction Details
04
BONETTIQuality Valves & Level Gauges
05
1 BODYAvailable in Carbon steel and various alloy steels, in forged, drop-forged or cast material.RX (on castings) or UT/MT (on forgings) examination is usuallyperformed as standard for Special Class or upon request in other cases.Machining is properly performed, for perfect aligment of all elements. I n s i d e , t w o s m o o t h m a c h i n e d g r o o v e s g u i d e t h erelevant tongues of the wedge or disk.The seat rings are welded-in after complete finish. In the cast bodies, when the bonnet is pressure seal (Fig. 102), a weldedstainless steel overlay (26) on the body-gasket sealing area guarantees effective and long-life bonnet closure.
3 SEAT RINGSBoth seat rings are stellite hardfaced, completely machined and then welded into the body. Their shape does not allow distorsions of sealing surfaces by pressure and temperature changes.Bore dimension of the seat rings is according to ANSI B16.34- 1981 Table G-A1 and tolerances given on Paragraph 6.1.2.
2 BONNETUsually of the same material as the body. It can be:- bolted, or- pressure seal, or- seal welded.RX (on castings) or UT/MT (on forgings) examination is usuallyperformed as standard for Special Class or upon request in other cases.Pressure seal bonnet is pushed from inner pressure against pressure seal gasket (10) which is kept in place by the spacerring (25) and the segmental ring (12), see Fig. 102, or directly by the yoke. Specially accurate are:- easy insertion and starting tightness of pressure seal gasket- easy disassembling and reassembling.Stem backseat area is hardfaced, usually Stellited.
4 WEDGEUsually two-pieces split wedge, for perfect sealability to the seat rings. The wedge tongues are trapped and fully guided by the body grooves which are long enough for the whole stroke. The wedge is directly moved by the stem head trapped between wedge halves.In this way: the stem is non-revolving; the point at which the force acts is as down as possible; the height and the weight of the valve are minimized.Wedge seats are stellite hardfaced. Wedge tongues are hardfaced, usually stellited (27).In the gate wedges, the spacer (5) transmits the closing force through the wedge halves against the seat r ings. To fac i l i ta tefield repairability, the spacer can be replaced with a thicker one, without replacing the whole wedge. In the parallel slide valves, the disk spring (5.1) keeps both disk halves against the seat rings, to begin closure seal.
6 STEMThe stem material is selected to have the best mechanical features. For most used materials see table at page 7. Above the head trapped between the two wedge halves (Fig. 104) the stem has a conical shoulder which -when the valve is fully open- is pulled against bonnet for effective backseating with axial (not rotating) movement.In the parallel slide valves, the stem can not rotate becauseof indexing stop (21) which acts two more functions: the positiveend of the stroke; the index of actual disk position.
Fig. 102
Fig. 103
Fig. 104
1 Body2 Pressure seal bonnet10 Pressure seal
Stainless Steel gasket12 Segmental ring25 Spacer ring26 Stainless steel overlay
(on cast bodies only)
1 Body4 Split wedge5 Spacer27 Hardfaced
tongues
4 Split wedge5 Spacer6 Stem
Fig. 105Equalizing pipe
FLOW
18 YOKEUsually made of Carbon steel, is very rugged and withstands the thrusts of eventual actuator. Wide windows allow easy acces and ventilation of packing area. In the major sizes, the yoke is locked to the body by a two pieces clamp (19) and two clamp bolts (20) for cast bodies, or by stud bolts & nuts for forged bodies . Those connections are very stiff and allows easy field maintenance. In the minor sizes, the yoke is screwed and fixed to the body and permits same advantages.7 YOKE NUTUsually made of special bronze, but on request of Ni Resist A439 D2. It is oversized, and very smooth machined, to minimize friction with the stem. Every seizing possibility is excluded. Nut is rotated by the handwheel through a key or by the actuator through relevant adaptor. Rotation of yoke nut is guaranteed by two roller bearings, when necessary by two tapered ones.9 PACKINGIs made of an adequate number of preformed rings of an approved high pressure - temperature quality. Special qualities available on request.The whole system Packing - Packing Chamber - Gland Stud and Flange (15 and 15.1) - Gland Studs (16) is very carefully designed and realized. It is as distant as possible from fluid flow, for longer packing life.23 HANDWHEELSpoke handwheel is currently supplied. Other kind of control is available and in some case is indispensable for good operation,for instance:- chain wheel- gear operator, in case with universal joint and floor stand- impactor handwheel- electro-hydraulic actuator- pneumatic actuator.Actuator is usually supplied already mounted on the applicablevalve. In this field customer's requirements are very different;therefore th is cata logue descr ibes our va lves wi thoutactuator even though it is indispensable for operation. OurTechnical Service usually provides all data operation for thecorrect selectionOPTIONALSIn some operating conditions some optionals are advisable and sometimes indispensable for proper operation of the valve, for instance:- By-pass: it is a pipe outside the valve, connects the upstream and the downstream of the valve and can be opened or closed by the small by-pass valve to facilitate the operation of the main valve.- Equalizing pipe. Fig. 105. Is a pipe outside the valve and connects the upstream and the central part of the valve body. The equalizer pipe avoids dangerous over pressure in the valve body when the valve is closed and the piping system is reheated. It can be isolatad by a stop valve.- Equalizer pipe and By-pass. Fig. 106. Is the installation on the same valve of both aforesaid devices.- Upon request other optional can be fitted on the valves, like:- spring loaded safety valves;- bottom drain valves;- rupture disk against over pressure;- position indicators and limit switches;- and other.As for the pieces named in this pages but not itemized in Fig.101, see the details at the foot of every single descriptivepage.
06
BONETTIQuality Valves & Level Gauges
Fig. 106Equalizing pipe and by-pass
FLOW
Cast Gate valve 14” ASME Class 2500
Drop-forged Gate valve 3” ASME Class 2500
07
Item No. ComponentComponent Material for Material Code - CAST VALVES Component Material for Material Code - FORGED VALVES
CB C6 C9 C12A 71 11 22 91
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A A105 A182 F11 cl.2 A182 F22 cl.3 A182 F91
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9 A105 A182 F11 cl.2 A182 F22 cl.3 A182 F91
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + StelliteA105 + Inconel+Stellite
A182 F11 + Inconel+Stellite
A182 F22 + Inconel+Stellite
A182 F91 + Inconel+Stellite
4 Wedge A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite A105 + StelliteA182 F11 cl.2 +Stellite
A182 F22 cl.3 +Stellite
A182 F91 + Stellite
5 Spacer A182 F6 A182 F6 A182 F6 A182 F6 A105 A182 F11 cl.2 A182 F22 cl.3 A182 F91
5.1 Disk Spring Alloy steel Inconel Inconel Inconel Inconel Inconel Inconel Inconel
6 Stem A182 F6 A182 F6 A182 F6X10CrMOVNb9-1/X20CrMoV11-1
X10CrMOVNb9-1/X20CrMoV11-1
X10CrMOVNb9-1/X20CrMoV11-1
X10CrMOVNb9-1/X20CrMoV11-1
X10CrMOVNb9-1/X20CrMoV11-1
7 Yoke nut B 148-952 B 148-952 B 148-952 B 148-952
8 Backseat facing Stellite Stellite Stellite Stellite Stellite Gr.6 Stellite Gr.6 Stellite Gr.6 Stellite Gr.6
9 Packing Graphite Graphite Graphite Graphite Graphite Graphite Graphite Graphite
10 Pressure seal gasketA182 F316or Graphite
A182 F316or Graphite
A182 F316or Graphite
A182 F316or Graphite
Graphite Graphite Graphite Graphite
10.1 Body/Bonnet gasket AISI 304+Graphite AISI 304+Graphite
10.2 Body/Bonnet ring joint AISI 316 AISI 316
11 Body/Bonnet bolt A193 B7 A193 B7
12 Segmental ring AISI 420 AISI 420 AISI 420 AISI 420 A105 A182 F11 cl.2 A182 F22 cl.3 A182 F91
13 Bonnet ange A105 A105 A105 A105 A105 A182 F11 cl.2 A182 F22 cl.3 A182 F91
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy SteelA193 GrB8R (XM19)/A194 Gr4
A193 GrB8R (XM19)/A194 Gr4
A193 GrB8R (XM19)/A194 Gr4
A193 GrB8R (XM19)/A194 Gr4
15 Gland A 182 F304 A182 F304 A182 F304 A182 F304 A105 A105 A105 A105
15.1 Gland ange A105 A105 A105 A105 A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7 A193 GrB8R (XM19) A193 GrB8R (XM19) A193 GrB8R (XM19) A193 GrB8R (XM19)
17 Column A105 A105
18 Yoke A216 WCB A216 WCB A216 WCB A216 WCB A216 WCB A216 WCB A216 WCB A216 WCB
19 Clamp A216 WCB A216 WCB A216 WCB A216 WCB A216 WCB A216 WCB A216 WCB A216 WCB
20 Clamp bolt / Yoke bolt A193 B7 A193 B7 A193 B7 A193 B7A193 GrB8R (XM19)/A194 Gr4
A193 GrB8R (XM19)/A194 Gr4
A193 GrB8R (XM19)/A194 Gr4
A193 GrB8R (XM19)/A194 Gr4
21 Stem stop A105 A105
22 Roller bearing Standard Standard Standard Standard Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H A194 Gr4 A194 Gr4 A194 Gr4 A194 Gr4
NOTE Materials can be different depending on specic operating condition or upon Custoner request or due to design modication
Main Materials characteristics
MaterialASTM
A216WCBASTM
A217WC6ASTM
A217WC)ASTM
A351CF8MASTM
A217C12AStellite
Gr.6
ASTMA479
T.410C.3
ASTMA193B7
ASTMA182 FXM 19
ASTMA1942H
ASTMB150
C62300
ASTMB166
N06600
ASTMA182F6
ASTMA564T.630Cond. H1075
ASTMA453
Gr. 660
Chemical Analysis (Note 1)
Carbon % 0.35 max 0.10-0.20 0.15 max 0.08 max 0.08-0.12 1 0.13 max 0.38-0.48 0.06 max 0.40 max 0.15 max 0.15 max 0,07 0.08 max
Manganese % 0.60-105 0.30-0.80 0.30-0.60 2.00 max 0.30-0.60 1.00 max 0.75-1.00 4.0-6.0 0.5 max 1.0 max 1.00 max 1.0 max 2.00 max
Phosphorus % 0.04 max 0.04 max 0.04 max 0.04 max 0.02 max 0.04 max 0.04 max 0.04 max 0.04 max 0.04 max 0.04 max 0.040 max
Sulphur % 0.05 max 0.04 max 0.04 max 0.03 max 0.01 max 0.03 max 0.04 max 0.03 max 0.05 max 0.015 max 0.30 max 0.03 max 0.030 max
Silicon % 0.35 max 0.5-1.0 0.5 max 1.00 max 0.20-0.50 1.00 max 0.20-0.35 1.00 max 0.25 max 0.5 max 1.00 max 1.0 max 1.00 max
Chromium % 1.0-1.5 2.0-2.5 16.00-18.00 8.00-9.50 28 11.5-13.5 0.80-1.10 20.5-23.5 14.0-17.0 11.5-13.5 15.0-17.5 13.5-16.0
Nickel % 10.00-14.00 0.40 max 0.50 max 11.5-13.5 1.0 max 72 min+Co 0.50 max 3.0-5.0 24.0-27.0
Molybdenum % 0.44-0.65 0.87-1.13 2.00-3.00 0.85-1.05 0.15-0.25 1.5-3.0 1.2-2.0 1.0-1.5
Copper % 82.2 min 0.50 max 3.0-5.0
Aluminium % 8.5-10.0 0.35 max
Iron % 2.0-4.0 6.0-10.0
Cobalt % 66
Tungsten % 5
Titanium % 1.90-2.35
Columbium % 0.10-0.30
Mechanical features (Note 2) (Note 2) (Note 2)
Tensile Strengthpsi 70000 70000 75000 75000 85000 130000 125000 100000 78000 155000 110000 145000 130000
MPa 485 485 515 515 585 900 860 690 542 1.069 760 1000 895
Yield Strengthpsi 36000 40000 45000 30000 60000 100000 105000 55000 32000 90000 85000 125000 85000
MPa 250 275 310 205 415 690 720 380 221 620 585 862 585
Elongation on 2" %min 22 20 20 30 20 12 16 35 15 10 15 13 15
List of Materials for Material Code
Chemical Analysis and Mechanical Features are given forCustomer’s convenience only. Actual and binding values are theones prescribed by original Standard
1 We utilise also steel with lower Carbon content (≤�0,23%).
2 Mechanical features depend on heat treatment. Prescribed heat treatment permits us to obtain the most suitablephysical and chemical characteristics.
3 Ratings of Tables on page19 are those indicated by ASME B16.34for Classes 600, 900, 1500, 2500, 4500 and inerpolated forClasses 1700 - 2700.
4 Due to a possible transformation of carbide into graphite, ASMEB 16.34 does not recommend the use of Carbon steel valves(BONETTI-CMI material Code “CB” / “71”) over 800 °F (425 °C)for extended periods.
5 For A217 WC6 / A182 F11 and A217 WC9 / A182 F22 valves(CMI-BONETTI material Code “C6”, “11” and “C9”, “22”), ASMEB 16.34 recommends: “Use normalised and tempered material only - Not to be usedover 1100 °F (595 °C)”.
6 At temperatures above 1000 °F (538 °C), material A351 CF8M /!182 F316 (BONETTI-CMI material Code CF8M / 316), must beused only when the Carbon content is 0.04% or higher.
7 As BONETTI CMI valves are overdimensioned respect tosome International Standard prescriptions, including ASMEB16.34; effective maximum operating condition can be communi-cated on request.
Notes for Materials(Those Notes apply also to Rating Tables on Pag. 19)
Notes for Rating(Those Notes apply also to Rating Tables on Pag. 19)
GENERAL NOTE
- Dimensions and weight shown on the tables for each valvetype and size are not binding and are referred to cast valves.
- Forged valves can have different dimensions and weight.- Depending on the type, rating and size the valve can be sup-
plied both cast or forged, or only cast or only forged: applyto us for detailed information.
08
BONETTI CMI Gate ValvesSplit wedge - bolted bonnet ASME Class 600Cast - Sizes 1.1/2" to 4" (DN 40 to 100) Buttwelding or Flanged Ends
Material Codes currently manufactured are: CB, C6.
Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25 (Fig. 121)- Flanged Ends RF ASME B16.5 (Fig. 121.1).
The relevant Ratings for each Material Code are shown at page19,for ASME Class 600.
Notes:
1 These valves have split wedge and intermediate spacer.3 Dimensions expressed in millimeters, but converted from original
Standard in inches, are rounded.4 Exceptionally and compatibly with our moulds and die equip-
ment, some components usually made of cast steel can be sup-plied of the corresponding forged steel.
5 Body-Bonnet sealability can be obtained by means of the Gasket(10.1) or the Ring Joint (10.2).
7 Body Length L1 is according to ASME B16.10-Regular Pattern.8 On request flanges finishing can be other than RF. 12 The Weight listed in the table is referred to cast valves and it is
not binding. For forged valves the wiigth is different: please applyto us for more information.
23
24
16
9
8
2
10.1
4
5
7
22
6
15.1
15
10.2
24
11
3
1
Fig. 121.1
Fig.121 Fig.121.1
SIZEDIMENSIONS BW ENDS RF FLANGED ENDS
B C V L1 Weight D E F Holes Ø Circle L1 Weight
mm inches mm mm mm mm kg mm mm mm No mm mm mm kg
40 1.1/2" 410 465 250 241,5 23 156 22,5 73 4 22 114 241,5 30
50 2" 450 510 250 292 28 165 25,5 92 8 19 127 292 48
65 2.1/2" 520 600 250 330 47 191 29,5 105 8 22 149 330 60
80 3" 610 705 300 355,5 58 210 32 127 8 22 168 355,5 76
100 4" 665 780 350 432 85 273 38 157 8 25 216 432 121
BONETTI CMI Gate ValvesParallel slide - bolted bonnet ASME Class 600 Cast - Sizes 1.1/2" to 4" (DN 40 to 100) Buttwelding or Flanged Ends
Material Codes currently manufactured are: CB, C6.
Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25 (Fig. 131)- Flanged Ends RF ASME B16.5 (Fig. 131.1).
The relevant Ratings for each Material Code are shown at page19,for ASME Class 600.
Notes:
2 These valves have split parallel disk and intermediate disk spring.3 Dimensions expressed in millimeters, but converted from origi-
nal Standard in inches, are rounded.4 Exceptionally and compatibly with our moulds and die equip-
ment, some components usually made of cast steel can be sup-plied of the corresponding forged steel.
5 Body-Bonnet sealability can be obtained by means of theGasket (10.1) or the Ring Joint (10.2).
7 Body Length L1 is according to ASME B16.10 - Regular Pattern.8 On request flanges finishing can be other than RF. 12 The Weight listed in the table is referred to cast valves and it is
not binding. For forged valves the wiigth is different: pleaseapply to us for more information.
7
22
6
24
16
8
10.1
2
4
5.1
3
1
23
21
17
15.1
15
9
24
10.2
11
Fig. 131.1
Fig.131 Fig.131.1
SIZEDIMENSIONS BW ENDS RF FLANGED ENDS
B C V L1 Weight D E F Holes Ø Circle L1 Weight
mm inches mm mm mm mm kg mm mm mm No mm mm mm kg
40 1.1/2" 460 515 250 241,5 25 156 22,5 73 4 22 114 241,5 32
50 2" 505 565 250 292 41 165 25,5 92 8 19 127 292 51
65 2.1/2" 580 660 250 330 50 191 28,5 105 8 22 149 330 63
80 3" 680 770 300 355,5 62 210 32 127 8 22 168 355,5 80
100 4" 740 855 350 432 92 273 38 157 8 25 216 432 128
09
BONETTI CMI Gate ValvesSplit wedge - pressure seal bonnetASME Class 600-900-1500 Drop-forged - Sizes 2" to 6" (DN 50 to 150)Buttwelding Ends
Material Codes currently manufactured are: 71, 11, 22, 91.
Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25 (Fig. 122.2-132.2)
The relevant Ratings for each Material Code are shown at page19,for ASME Class 600-900-1500.
Notes:
1 These valves have split wedge with intermediate spacer or havesplit parallel slide disk with intermediate disk spring.
3 Dimensions expressed in millimeters, but converted from origi-nal Standard in inches, are rounded.
4 Exceptionally, and compatibly with our moulds and die equip-ment, some components usually made of cast steel can be sup-plied of corresponding forged steel.
6 Body Length L is according to ASME B16.10:- Short Pattern for valves ≤ 24”-600, 16"-900, 20"-1500- Long Pattern for valves ≥ 18"-900, 22"-1500
12 The Weight listed in the table is not binding.
For flanged drop-forged valves apply to us for more information.
23
24
14
9
8
2
4
5
7
22
6
18
15.1
15
16
10
3
1
Fig. 122.2
Fig. 122.2
BONETTI CMI Gate ValvesParallel slide - pressure seal bonnetASME Class 600-900-1500 Drop-forged - Sizes 2" to 6" (DN 50 to 150)Buttwelding Ends
23
7
22
6
21
17
24
15.1
16
15
9
5.1
2
8
10
1
3
4
Fig. 132.2
Fig. 132.2
DROP-FORGED VALVES - SPLIT WEDGE (Fig. 122.2)
SIZE
ASME Class 600 ASME Class 900 ASME Class 1500
B C V L Weight B C V L Weight B C V L Weight
mm in. mm mm mm mm kg mm mm mm mm kg mm mm mm mm kg
50 2” 610 661 250 178 48 610 661 300 216 50 610 661 350 216 60
65 2.½” 620 684 300 216 60 620 684 350 254 65 620 684 400 254 75
80 3” 635 712 350 254 70 635 712 400 305 85 630 707 450 305 90
100 4" 695 797 400 305 80 695 797 450 356 105 715 817 500 406 115
150 6” 820 973 450 457 189 820 973 500 508 205 810 963 600 559 215
Manufacturer reserves to change dimensions and weight
DROP-FORGED VALVES - SPLIT PARALLEL SLIDE DISK (Fig. 132.2)
SIZE
ASME Class 600 ASME Class 900 ASME Class 1500
B C V L Weight B C V L Weight B C V L Weight
mm in. mm mm mm mm kg mm mm mm mm kg mm mm mm mm kg
50 2” 671 722 250 178 51 671 722 300 216 53 671 722 350 216 63
65 2.½” 682 746 300 216 63 682 746 350 254 69 682 746 400 254 79
80 3” 699 776 350 254 74 699 776 400 305 90 693 770 450 305 95
100 4" 765 867 400 305 84 765 867 450 356 111 787 889 500 406 121
150 6” 902 1055 450 457 199 902 1055 500 508 216 891 1044 600 559 226
Manufacturer reserves to change dimensions and weight
10
18
22
24
16
14
12
10
4
5
3
1
23
6
15.1
15
9
13
2
8
Fig. 123.2
BONETTI CMI Gate ValvesSplit wedge - pressure seal bonnetASME Class 600-1500 Forged - Sizes 8" to 24" (DN 200 to 1500)Buttwelding Ends
Material Codes currently manufactured are: 71, 11, 22, 91.
Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25 (Fig. 123.2-133.2)
The relevant Ratings for each Material Code are shown at page19,for ASME Class 600-900-1500.
Notes:
1 These valves have split wedge with intermediate spacer or havesplit parallel slide disk with intermediate disk spring.
3 Dimensions expressed in millimeters, but converted from origi-nal Standard in inches, are rounded.
4 Exceptionally, and compatibly with our moulds and die equip-ment, some components usually made of cast steel can be sup-plied of the corresponding forged steel.
6 Body Length L is according to ASME B16.10:- Short Pattern for valves ≤ 24”-600, 16"-900, 20"-1500- Long Pattern for valves ≥ 18"-900, 22"-1500
12 The Weight listed in the table is not binding.
For flanged forged valves apply to us for more information.
Fig.123.2
BONETTI CMI Gate ValvesParallel slide - pressure seal bonnetASME Class 600-1500 Forged - Sizes 8" to 24" (DN 200 to 1500)Buttwelding Ends
7
22
24
16
17
12
10
4
3
1
23
6
21
15.1
15
9
13
2
8
5.1
Fig. 133.2
Fig.133.2
FORGED VALVES - SPLIT WEDGE (Fig. 123.2)
SIZEASME Class 600 ASME Class 900 ASME Class 1500
B C V L Weight B C V L Weight B C V L Weight
mm in. mm mm mm mm kg mm mm mm mm kg mm mm mm mm kg
200 8" 1100 1304 500 584 333 1100 1304 600 660 590 1227 1431 700 711 590
250 10" 1318 1572 600 711 580 1318 1572 700 787 900 1400 1654 800 864 900
300 12" 1620 1925 700 813 828 1620 1925 800 914 1265 1650 1955 800 991 1500
350 14" 1835 2191 800 889 1200 1835 2191 800 991 1500 1840 2196 800 1067 1850
400 16" 2010 2417 800 991 1500 2010 2417 1000 1092 1770 2105 2512 1000 1194 2380
450 18" 2272 2730 1000 1092 1860 2272 2730 1000 1219 2270 2272 2730 1000 1346 3100
500 20" 2470 2978 1000 1194 2580 2470 2978 1000 1321 3000 2483 2991 1000 1473 3950
600 24" 2983 3593 1000 1397 3380 2983 3593 1000 1549 5100 2820 3430 1000 1943 6850
Manufacturer reserves to change dimensions and weight
FORGED VALVES - SPLIT PARALLEL SLIDE DISK (Fig. 133.2)
SIZEASME Class 600 ASME Class 900 ASME Class 1500
B C V L Weight B C V L Weight B C V L Weight
mm in. mm mm mm mm kg mm mm mm mm kg mm mm mm mm kg
200 8" 1210 1414 500 584 350 1210 1414 600 660 620 1350 1554 700 711 620
250 10" 1450 1704 600 711 609 1450 1704 700 787 945 1540 1794 800 864 945
300 12" 1782 2087 700 813 870 1782 2087 800 914 1329 1815 2120 800 991 1570
350 14" 2019 2375 800 889 1260 2019 2375 800 991 1572 2024 2380 800 1067 1950
400 16" 2211 2618 800 991 1575 2211 2618 1000 1092 1858 2316 2723 1000 1194 2500
450 18" 2500 2958 1000 1092 1953 2500 2958 1000 1219 2382 2500 2958 1000 1346 3260
500 20" 2717 3225 1000 1194 2709 2717 3225 1000 1321 3150 2732 3240 1000 1473 4150
600 24" 3282 3892 1000 1397 3549 3282 3892 1000 1549 5355 3102 3712 1000 1943 6670
Manufacturer reserves to change dimensions and weight
11
BONETTI CMI Gate ValvesSplit wedge - pressure seal bonnetASME Class 600-900-1500Cast - Sizes 6" to 24" (DN 150 to 600)Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A
Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25 (Fig. 127-137).The relevant Ratings for each Material Code are shown at page19,for ASME Class 600-900-1500.
Notes:
1 These valves have split wedge with intermediate spacer or havesplit parallel slide disk with intermediate disk spring.
3 Dimensions expressed in millimeters, but converted from origi-nal Standard in inches, are rounded.
6 Body Length L is according to ASME B16.10:- Short Pattern for valves ≤ 24”-600, 16"-900, 20"-1500- Long Pattern for valves ≥ 18"-900, 22"-1500
12 The Weight listed in the table is not binding.
BONETTI CMI Gate ValvesParallel slide - pressure seal bonnetASME Class 600-900-1500Cast - Sizes 6" to 24" (DN 150 to 600)Buttwelding Ends
CAST VALVES - SPLIT WEDGE (Fig. 127)
SIZEASME Class 600 ASME Class 900 ASME Class 1500
B C V L Weight B C V L Weight B C V L Weight
mm in. mm mm mm mm kg mm mm mm mm kg mm mm mm mm kg
200 8" 880 1080 500 584 290 905 1100 600 660 360 880 1065 700 711 430
250 10" 1060 1305 600 711 505 1015 1265 700 787 660 1030 1260 800 864 720
300 12" 1165 1470 700 813 720 1170 1470 800 914 920 1240 1515 800 991 1100
350 14" 1225 1560 800 889 1040 1260 1590 800 991 1225 1350 1650 800 1067 1580
400 16" 1405 1795 800 991 1305 1470 1840 1000 1092 1415 1520 1860 1000 1194 1980
450 18" 1695 2130 1000 1092 1620 1550 1965 1000 1219 1890 1610 1995 1000 1346 2650
500 20" 1820 2295 1000 1194 2240 1810 2250 1000 1321 2785 1700 2130 1000 1473 3580
600 24" 2050 2620 1000 1397 2940 1935 2490 1000 1549 4275 2005 2530 1000 1943 5840
Manufacturer reserves to change dimensions and weight
CAST VALVES - SPLIT PARALLEL SLIDE DISK (Fig. 137)
SIZEASME Class 600 ASME Class 900 ASME Class 1500
B C V L Weight B C V L Weight B C V L Weight
mm in. mm mm mm mm kg mm mm mm mm kg mm mm mm mm kg
200 8" 995 1185 500 584 310 1010 1205 600 660 385 980 1165 700 711 455
250 10" 1185 1430 600 711 535 1135 1395 700 787 705 1150 1380 800 864 760
300 12" 1305 1610 700 813 760 1305 1605 800 914 975 1380 1655 800 991 1250
350 14" 1435 1710 800 889 1090 1410 1740 800 991 1290 1495 1795 800 1067 1660
400 16" 1570 1960 800 991 1370 1640 2010 1000 1092 1495 1690 2030 1000 1194 2080
450 18" 1895 2310 1000 1092 1705 1730 2145 1000 1194 1965 1795 2180 1000 1346 2780
500 20" 2035 2510 1000 1194 2350 1990 2430 1000 1219 2885 1890 2320 1000 1473 3755
600 24" 2295 2965 1000 1397 3085 2170 2725 1000 1549 4450 2785 3310 1000 1943 5980
Manufacturer reserves to change dimensions and weight
7
22
24
16
18
19
20
12
10
4
5
3
1
23
6
15.1
15
9
24
13
14
2
8
Fig. 127
Fig.127
7
22
24
16
17
19
20
12
10
4
3
1
23
6
21
15.1
15
9
24
13
14
2
8
5.1
Fig. 137
Fig.137
12
Gates 6” ASME Class 4500Gates 6” ASME Class 4500
Gate 24” ASME Class 2500Gate 24” ASME Class 2500
Gate 24” ASME Class 2500Gate 24” ASME Class 2500
Gates 6” parallel slide ASME Class 1500 with pneumatic actuatorGates 6” parallel slide ASME Class 1500 with pneumatic actuator
13
BONETTI CMI Gate ValvesSplit wedge - pressure seal bonnetASME Class 2500 Drop-forged - Sizes 2" to 4" (DN 50 to 100)Buttwelding Ends
Material Codes currently manufactured are: 71, 11, 22, 91. Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25 (Fig. 122.2-132.2)The relevant Ratings for each Material Code are shown at page19,for ASME Class 2500.
Notes:
1 These valves have split wedge with intermediate spacer or havesplit parallel slide disk with intermediate disk spring.
3 Dimensions expressed in millimeters, but converted from origi-nal Standard in inches, are rounded.
4 Exceptionally, and compatibly with our moulds and die equip-ment, some components usually made of cast steel can be sup-plied of the corresponding forged steel.
6 Body Length L is according to ASME B16.10:- Short Pattern for valves ≤ 18"-2500- Long Pattern for valves ≥ 20"-2500
12 The Weight listed in the table is not binding.
For flanged drop-forged valves apply to us for more information.
BONETTI CMI Gate ValvesParallel slide - pressure seal bonnetASME Class 2500 Drop-forged - Sizes 2" to 4" (DN 50 to 100)Buttwelding Ends
DROP-FORGED VALVES - SPLIT WEDGE (Fig. 122.2)
SIZEASME Class 2500
B C V L Weight
mm in. mm mm mm mm kg
50 2” 690 741 400 279 80
65 2.½” 715 779 450 330 90
80 3” 725 802 500 368 100
100 4" 730 832 600 457 130
Manufacturer reserves to change dimensions and weight
DROP-FORGED VALVES - SPLIT PARALLEL SLIDE DISK (Fig. 132.2)
SIZEASME Class 2500
B C V L Weight
mm in. mm mm mm mm kg
50 2” 759 810 400 279 84
65 2.½” 787 851 450 330 95
80 3” 798 875 500 368 105
100 4" 803 905 600 457 137
Manufacturer reserves to change dimensions and weight
23
24
14
9
8
2
4
5
7
22
6
18
15.1
15
16
10
3
1
Fig. 122.2
Fig. 122.2
23
7
22
6
21
17
24
15.1
16
15
9
5.1
2
8
10
1
3
4
Fig. 132.2
Fig. 132.2
14
BONETTI CMI Gate ValvesSplit wedge - pressure seal bonnetASME Class 2500 Forged - Sizes 6" to 24" (DN 150 to 600)Buttwelding Ends
Material Codes currently manufactured are: 71, 11, 22, 91. Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25 (Fig. 123.2-133.2)The relevant Ratings for each Material Code are shown at page19,for ASME Class 2500.
Notes:
1 These valves have split wedge with intermediate spacer or havesplit parallel slide disk with intermediate disk spring.
3 Dimensions expressed in millimeters, but converted from origi-nal Standard in inches, are rounded.
4 Exceptionally, and compatibly with our moulds and die equip-ment, some components usually made of cast steel can be sup-plied of the corresponding forged steel.
6 Body Length L is according to ASME B16.10:- Short Pattern for valves ≤ 18"-2500- Long Pattern for valves ≥ 20"-2500
12 The Weight listed in the table is not binding.
BONETTI CMI Gate ValvesParallel slide - pressure seal bonnetASME Class 2500 Forged - Sizes 6" to 24" (DN 150 to 600)Buttwelding Ends
FORGED VALVES - SPLIT WEDGE (Fig. 123.2)
SIZEASME Class 2500
B C V L Weight
mm in. mm mm mm mm kg
150 6” 855 1008 700 610 330
200 8" 1185 1389 800 762 680
250 10" 1317 1571 800 914 910
300 12" 1594 1899 1000 1041 1590
350 14" 1740 2096 1000 1118 1960
400 16" 1935 2342 1000 1245 2650
450 18" 2100 2558 1000 1397 3300
500 20" 2416 2924 1000 1480 4100
600 24" 2738 3348 1000 1720 6850
Manufacturer reserves to change dimensions and weight
FORGED VALVES - SPLIT PARALLEL SLIDE DISK (Fig. 133.2)
SIZEASME Class 2500
B C V L Weight
mm in. mm mm mm mm kg
150 6” 941 1094 700 610 347
200 8" 1304 1508 800 762 715
250 10" 1449 1703 800 914 955
300 12" 1754 2059 1000 1041 1670
350 14" 1914 2270 1000 1118 2060
400 16" 2129 2536 1000 1245 2780
450 18" 2310 2768 1000 1397 3470
500 20" 2658 3166 1000 1480 4300
600 24" 3012 3622 1000 1720 7200
Manufacturer reserves to change dimensions and weight
18
22
24
16
14
12
10
4
5
3
1
23
6
15.1
15
9
13
2
8
Fig. 123.2
Fig.123.2
7
22
24
16
17
12
10
4
3
1
23
6
21
15.1
15
9
13
2
8
5.1
Fig. 133.2
Fig.133.2
15
BONETTI CMI Gate ValvesSplit wedge - pressure seal bonnetASME Class 2500 Cast - Sizes 6" to 24" (DN 150 to 600)Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25 (Fig. 129-139).
The relevant Ratings for each Material Code are shown at page19,for ASME Class 2500.
Notes:
1 These valves have split wedge with intermediate spacer or havesplit parallel slide disk with intermediate disk spring.
3 Dimensions expressed in millimeters, but converted from origi-nal Standard in inches, are rounded.
4 Exceptionally and compatibly with our moulds and die equip-ment, some components usually made of cast steel can be sup-plied of the corresponding forged steel.
10 Body Length L is according to ASME B16.10-Short Pattern up to18" (DN 450); for larger sizes, CMI standard.
12 The Weight listed in the table is not binding.
7
22
24
16
18
19
20
12
10
4
5
3
1
23
6
15.1
15
9
24
13
14
2
8
Fig. 129
Fig.129
BONETTI CMI Gate ValvesParallel slide - pressure seal bonnetASME Class 2500 Cast - Sizes 6" to 24" (DN 150 to 600)Buttwelding Ends
7
22
24
16
17
19
20
12
10
4
3
1
23
6
21
15.1
15
9
24
13
14
2
8
5.1
Fig. 139
Fig.139
CAST VALVES - SPLIT WEDGE (Fig. 129)
SIZEASME Class 2500
B C V L Weight
mm in. mm mm mm mm kg
150 6” 765 890 700 610 365
200 8" 910 1075 700 762 635
250 10" 1090 1395 800 914 1090
300 12" 1240 1475 1000 1041 1610
350 14" 1265 1515 1000 1118 2060
400 16" 1480 1780 1000 1245 2965
450 18" 1610 1940 1000 1397 3800
500 20" 1705 2070 1000 1575 5120
600 24" 1850 2280 1000 1676 6300
Manufacturer reserves to change dimensions and weight
CAST VALVES SPLIT - PARALLEL SLIDE DISK (Fig. 139)
SIZEASME Class 2500
B C V L Weight
mm in. mm mm mm mm kg
150 6” 855 980 700 610 390
200 8" 1015 1180 700 762 685
250 10" 1220 1425 800 914 1165
300 12" 1385 1620 1000 1041 1705
350 14" 1410 1660 1000 1118 2190
400 16" 1650 1950 1000 1245 3140
450 18" 1790 2120 1000 1397 3985
500 20" 1890 2255 1000 1575 5320
600 24" 2050 2420 1000 1676 6010
Manufacturer reserves to change dimensions and weight
16
Material Codes currently manufactured are: 71, 11, 22, 91.
Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25 (Fig. 123.2-133.2)
The relevant Ratings for each Material Code are shown at page19,for ASME Class 4500.
Notes:
1 These valves have split wedge with intermediate spacer or havesplit parallel slide disk with intermediate disk spring.
3 Dimensions expressed in millimeters, but converted from origi-nal Standard in inches, are rounded.
4 Exceptionally, and compatibly with our moulds and die equip-ment, some components usually made of cast steel can be sup-plied of the corresponding forged steel.
BONETTI CMI Gate ValvesParallel slide - pressure seal bonnetASME Class 4500 Forged - Sizes 2" to 18" (DN 50 to 450)Buttwelding Ends
FORGED VALVES - SPLIT WEDGE (Fig. 123.2)
SIZEASME Class 4500
B C V L Weight
mm in. mm mm mm mm kg
50 2”
Dimensions and weight depend on Customer needs concerning
required end to end length,required bore diameter,
piping size for butt welding, gear box or actuator,
accessories, etc.
Please apply to us for more information.
65 2.½”
80 3"
100 4”
150 6”
200 8"
250 10"
300 12"
350 14"
400 16"
450 18"
FORGED VALVES - SPLIT PARALLEL SLIDE DISK (Fig. 133.2)
SIZEASME Class 4500
B C V L Weight
mm in. mm mm mm mm kg
50 2”
Dimensions and weight depend on Customer needs concerning
required end to end length,required bore diameter,
piping size for butt welding, gear box or actuator,
accessories, etc.
Please apply to us for more information.
65 2.½”
80 3"
100 4”
150 6”
200 8"
250 10"
300 12"
350 14"
400 16"
450 18"
18
22
24
16
14
12
10
4
5
3
1
23
6
15.1
15
9
13
2
8
Fig. 123.2
Fig.123.2
7
22
24
16
17
12
10
4
3
1
23
6
21
15.1
15
9
13
2
8
5.1
Fig. 133.2
Fig.133.2
BONETTI CMI Gate ValvesSplit wedge - pressure seal bonnetASME Class 4500 Forged - Sizes 2" to 18" (DN 50 to 450)Buttwelding Ends
17
BONETTI CMI Gate ValvesSplit wedge - pressure seal bonnetASME Class 4500 Cast - Sizes 6" to 14" (DN 150 to 350)Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25 (Fig. 129-139).
The relevant Ratings for each Material Code are shown at page19,for ASME Class 4500.
Notes:
1 These valves have split wedge with intermediate spacer or havesplit parallel slide disk with intermediate disk spring.
3 Dimensions expressed in millimeters, but converted from origi-nal Standard in inches, are rounded.
4 Exceptionally and compatibly with our moulds and die equip-ment, some components usually made of cast steel can be sup-plied of the corresponding forged steel.
10 Body Length L is according to CMI Standard12 The Weight listed in the table is not binding.
7
22
24
16
18
19
20
12
10
4
5
3
1
23
6
15.1
15
9
24
13
14
2
8
Fig. 129
Fig.129
BONETTI CMI Gate ValvesParallel slide - pressure seal bonnetASME Class 4500 Cast - Sizes 6" to 14" (DN 150 to 350)Buttwelding Ends
7
22
24
16
17
19
20
12
10
4
3
1
23
6
21
15.1
15
9
24
13
14
2
8
5.1
Fig. 139
Fig.139
FORGED VALVES - SPLIT WEDGE (Fig. 129)
SIZEASME Class 4500
B C V L Weight
mm in. mm mm mm mm kg
150 6” 815 980
Dependin
g o
ngearb
ox
or
act
uato
r
750 1150
200 8" 815 1050 1040 1250
250 10" 970 1250 1270 2500
300 12" 970 1300 1270 2800
350 14" 1050 1400 1270 3800
400 16” 1150 1500 1270 5000
Manufacturer reserves to change dimensions and weight
FORGED VALVES - SPLIT PARALLEL SLIDE DISK (Fig. 139)
SIZEASME Class 4500
B C V L Weight
mm in. mm mm mm mm kg
150 6” 940 1130
Dependin
g o
ngearb
ox
or
act
uato
r
750 1200
200 8" 940 1130 1040 1300
250 10" 1100 1270 1270 2600
300 12" 1100 1500 1270 2950
350 14" 1200 1600 1270 4000
400 16” 1300 1700 1270 5250
Manufacturer reserves to change dimensions and weight
18
Material Codes currently manufactured are: C9-Z.Connections usually manufactured are:- Buttwelding Ends BW ASME B16.25.Max operating conditions are:3000 psi at 1020 °F (207 bar at 550 °C).Notes:- This valve has been expressly designed and realized as isola-
ting stop valve between pressure source and Vent valve andcan be closed only to allow servicing Vent valve without shuttingdown the boiler.
- This valve is always supplied complete with a 9/16" by-passvalve.
- Buttwelding Ends can be supplied semifinished.
7
22
6
2
8
4
5
23
24
15.1
16
9
28
1
3
Fig. 130
Fig.130
ItemNo.
Component
Component Materialfor Material Code
Dimensions
C9-Z Inches mm
1 Body A217 WC9 Size 2.1/2" 65
2 Bonnet A217 WC9 Bore at seat rings 2.1/2" 65
3 Seat rings A182 F304 + Stellite B 20" 508
4 Wedqe A217 WC9 + Stellite C 23.3/16" 589
5 Spacer A182 F6 V 20" 508
6 Stem A182 F6 L finished 14.1/2" 368
7 Yoke nut B 148-952 L semifinished 14.3/4" 375
8 Backseat facing Stellite R 9.5/16" 236
9 Packing Graphite S 8.11/16" 221
15.1 Gland flange A217 WC9 T open 19.3/16" 487
16 Gland stud A193 B7 T closed 18.5/8" 473
22 Roller bearing Standard Weight lb 265 kg 120
23 Handwheel Carbon Steel
24 Nut A194 2H Manufacturer reserves to changedimensions and weight28 Hardfaced backseat Stellite
BONETTI CMI Gate ValvesSplit wedge - seal welded bonnet ASME Class 1500, 2500, 3000 Special Class Size 2.1/2" (DN 65) Buttwelding Ends
19
RATING (See Notes on page 7)
OperatingTemperature
°C
Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar)
ASME Class 150 ASME Class 300 ASME Class 600 ASME Class 900 ASME Class 1500 ASME Class 2500 ASME Class 4500
Material Code Material Code Material Code Material Code Material Code Material Code Material Code
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
Me
tr
ic
al
Un
it
s
-29 +38 19,6 19,8 19,8 19,8 20,0 51,1 51,7 51,7 51,7 51,7 102,1 103,4 103,4 99,3 99,3 153,2 155,1 155,1 148,9 155,1 255,3 258,6 258,6 248,2 258,6 425,5 430,9 430,9 413,7 430,9 765,9 775,7 775,7 744,6 775,7
50 19,2 19,5 19,5 19,5 19,5 50,1 51,7 51,7 50,8 51,7 102,1 103,4 103,4 96,2 103,4 150,4 155,1 155,1 144,3 155,1 250,6 258,6 258,6 240,6 258,6 417,7 430,9 430,9 400,9 430,9 751,9 775,7 775,7 721,7 775,7
100 17,7 17,7 17,7 18,1 17,7 46,6 51,5 51,5 47,1 51,5 100,2 103,4 103,4 84,4 103,4 139,8 154,4 154,6 126,6 154,6 233,0 257,4 257,6 211,0 257,6 388,3 429,0 429,4 351,6 429,4 699,0 772,2 773,0 632,9 773,0
150 15,8 15,8 15,8 16,5 15,8 45,1 49,7 50,3 43,0 50,3 93,2 103,0 103,0 77,0 103,0 135,2 149,2 150,6 115,5 150,6 225,4 248,7 250,8 192,5 250,8 375,6 414,5 418,2 320,8 418,2 676,1 746,2 752,8 577,4 752,8
200 13,8 13,8 13,8 15,3 13,8 43,8 48,0 48,6 39,8 48,6 90,2 99,5 100,3 71,3 100,3 131,4 143,9 145,8 107,0 145,8 219,0 239,8 243,4 178,3 243,4 365,0 399,6 405,4 297,2 405,4 657,0 719,4 729,8 534,9 729,8
250 12,1 12,1 12,1 14,3 12,1 41,9 46,3 46,3 37,3 46,3 87,6 95,9 97,2 66,8 97,2 125,8 139,0 139,0 100,1 139,0 209,7 231,8 231,8 166,9 231,8 349,5 386,2 386,2 278,1 386,2 629,1 694,8 694,8 500,6 694,8
300 10,2 10,2 10,2 13,5 10,2 39,8 42,9 42,9 35,3 42,9 83,9 92,7 92,7 63,2 92,7 119,5 128,6 128,6 94,9 128,6 199,1 214,4 214,4 158,1 214,4 331,8 357,1 357,1 263,5 357,1 597,3 642,6 642,6 474,3 642,6
350 9,3 9,3 9,3 13,2 9,3 38,7 41,4 41,4 34,5 41,4 79,6 85,7 85,7 61,8 85,7 116,1 124,0 124,0 92,7 124,0 193,6 206,6 206,6 154,4 206,6 322,6 344,3 344,3 257,4 344,3 580,7 619,6 619,6 463,3 619,6
375 8,4 8,4 8,4 13,0 8,4 37,6 40,3 40,3 33,8 40,3 77,4 82,6 82,6 60,7 82,6 112,7 120,7 120,7 91,0 120,7 187,8 201,1 201,1 151,6 201,1 313,0 335,3 335,3 252,7 335,3 563,5 603,3 603,3 454,9 603,3
400 7,4 7,4 7,4 12,8 7,4 36,4 38,9 38,9 33,3 38,9 75,1 80,4 80,4 59,8 80,4 109,1 116,5 116,5 89,6 116,5 181,8 194,1 194,1 149,4 194,1 303,1 323,2 323,2 249,0 323,2 545,5 581,8 581,8 448,2 581,8
425 6,5 6,5 6,5 12,6 6,5 34,7 36,5 36,5 32,9 36,5 72,7 77,6 77,6 58,9 77,6 104,2 109,8 109,8 88,3 109,8 173,6 183,1 183,1 147,2 183,1 289,3 304,9 304,9 245,3 304,9 520,8 548,5 548,5 441,6 548,5
450 5,5 5,5 5,5 12,5 5,5 28,8 35,2 35,2 32,5 35,2 69,4 73,3 73,3 58,3 73,3 86,3 105,1 105,1 87,4 105,1 143,8 175,1 175,1 145,7 175,1 239,7 291,6 291,6 242,9 291,6 431,5 524,7 524,7 437,1 524,7
475 4,6 4,6 4,6 12,3 4,6 23,0 33,7 33,7 32,2 33,7 57,5 70,0 70,0 57,7 70,0 69,0 101,4 101,4 86,5 101,4 115,0 169,0 169,0 144,2 169,0 191,7 281,8 281,8 240,4 281,8 345,1 507,0 507,0 432,7 507,0
500 3,7 3,7 3,7 12,3 3,7 17,4 31,7 31,7 32,0 31,7 46,0 67,7 67,7 57,3 67,7 52,3 95,1 95,1 86,0 95,1 87,2 158,2 158,2 143,4 158,2 145,3 263,9 263,9 238,9 263,9 261,5 474,8 474,8 430,1 474,8
525 2,8 2,8 2,8 12,2 2,8 11,8 25,7 28,2 31,7 28,2 34,9 63,4 63,4 56,5 63,4 35,3 77,2 84,7 84,7 84,7 58,8 128,6 140,9 140,9 140,9 97,9 214,4 235,0 235,0 235,0 176,3 385,9 423,0 423,0 423,0
538 1,4 1,4 1,4 11,0 1,4 5,9 14,9 18,4 29,0 25,2 23,5 51,5 56,5 50,0 56,5 17,7 44,7 55,3 75,2 75,2 29,5 74,5 92,2 125,5 125,5 49,2 124,1 153,7 208,9 208,9 88,6 223,4 276,6 375,8 375,8
550 1,4 1,4 11,0 1,4 12,7 15,6 29,0 25,0 11,8 29,8 36,9 49,8 50,0 38,1 46,9 74,8 74,8 63,5 78,2 124,9 124,9 105,9 130,3 208,0 208,0 190,6 234,5 374,2 374,2
575 1,4 1,4 10,9 1,4 8,8 10,5 28,6 24,0 25,4 31,3 47,9 49,8 26,4 31,6 71,8 71,8 44,0 52,6 119,7 119,7 73,4 87,7 199,5 199,5 132,0 157,9 359,1 359,1
600 1,4 1,4 9,5 1,4 6,1 6,9 24,9 19,5 17,6 21,1 39,8 47,9 18,3 20,7 59,7 58,5 30,5 34,4 99,5 97,5 50,9 57,4 165,9 162,5 91,6 103,3 298,6 292,5
625 1,4 1,4 7,6 1,4 4,3 4,5 19,8 14,6 12,2 13,8 31,6 39,0 12,8 13,4 47,4 43,8 21,3 22,3 79,1 73,0 35,5 37,2 131,8 121,6 63,9 66,9 237,2 219,1
650 1,1 1,1 6,1 1,4 2,8 2,8 15,8 9,9 8,5 8,9 25,3 29,2 8,5 8,5 38,0 29,8 14,2 14,2 63,3 49,6 23,6 23,6 105,5 82,7 42,6 42,6 189,9 148,9
675 4,9 12,9 5,7 5,7 20,6 19,9 31,0 51,6 86,0 154,8
700 4,4 11,4 16,8 25,1 41,9 69,8 125,7
725 3,7 9,5 14,0 21,0 34,9 58,2 104,8
750 2,8 7,4 11,7 17,6 29,3 48,9 87,9
775 2,2 5,8 9,0 13,7 22,8 38,0 68,4
800 1,8 4,4 7,0 10,5 17,4 29,2 52,6
816 1,4 3,4 5,9 8,6 14,1 23,8 42,7
Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6
Hydrostatic Testing Pressure (bar)
Shell 29,4 29,7 29,7 29,7 30,0 76,7 77,6 77,6 77,6 77,6 153,2 155,1 155,1 149,0 155,1 229,8 232,7 232,7 223,4 232,7 383,0 387,9 387,9 372,3 387,9 638,3 646,4 64
RATING (See Notes on page 7)
OperatingTemperature
°F
Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi)
ASME Class 150 ASME Class 300 ASME Class 600 ASME Class 900 ASME Class 1500 ASME Class 2500 ASME Class 4500
Material Code Material Code Material Code Material Code Material Code Material Code Material Code
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
CB71
C611
C922
CF8M31
C12A91
En
glis
h
Un
it
s
-20 +100 285 290 290 275 290 740 750 750 720 750 1480 1500 1500 1440 1500 2220 2250 2250 2160 2250 3705 3750 3750 3600 3750 6170 6250 6250 6000 6250 11110 11250 11250 10800 11250
200 260 260 260 235 260 680 750 750 620 750 1360 1500 1500 1240 1500 2035 2250 2250 1860 2250 3395 3750 3750 3095 3750 5655 6250 6250 5160 6250 10185 11250 11250 9290 11250
300 230 230 230 215 230 655 720 730 560 730 1310 1445 1455 1120 1455 1965 2165 2185 1680 2185 3270 3610 3640 2795 3640 5450 6015 6070 4660 6070 9815 10830 10925 8390 10925
400 200 200 200 195 200 635 695 705 515 705 1265 1385 1410 1025 1410 1900 2080 2115 1540 2115 3170 3465 3530 2570 3530 5280 5775 5880 4280 5880 9505 10400 10585 7705 10585
500 170 170 170 170 170 605 665 665 480 665 1205 1330 1330 955 1330 1810 1995 1995 1435 1995 3015 3325 3325 2390 3325 5025 5540 5540 3980 5540 9040 9965 9965 7165 9965
600 140 140 140 140 140 570 605 605 450 605 1135 1210 1210 900 1210 1705 1815 1815 1355 1815 2840 3025 3025 2255 3025 4730 5040 5040 3760 5040 8515 9070 9070 6770 9070
650 125 125 125 125 125 550 590 590 440 590 1100 1175 1175 890 1175 1650 1765 1765 1330 1765 2745 2940 2940 2220 2940 4575 4905 4905 3700 4905 8240 8825 8825 6660 8825
700 110 110 110 110 110 530 570 570 435 570 1060 1135 1135 870 1135 1590 1705 1705 1305 1705 2665 2840 2840 2170 2840 4425 4730 4730 3620 4730 7960 8515 8515 6515 8515
750 95 95 95 95 95 505 530 530 425 530 1015 1065 1065 855 1065 1520 1595 1595 1280 1595 2535 2660 2660 2135 2660 4230 4430 4430 3560 4430 7610 7970 7970 6410 7970
800 80 80 80 80 80 410 510 510 420 510 825 1015 1015 845 1015 1235 1525 1525 1265 1525 2055 2540 2540 2110 2540 3430 4230 4230 3520 4230 6170 7610 7610 6335 7610
850 65 65 65 65 65 320 485 485 420 485 640 975 975 835 975 955 1460 1460 1255 1460 1595 2435 2435 2090 2435 2655 4060 4060 3480 4060 4785 7305 7305 6265 7305
900 50 50 50 50 50 230 450 450 415 450 460 900 900 830 900 690 1350 1350 1245 1350 1150 2245 2245 2075 2245 1915 3745 3745 3460 3745 3455 6740 6740 6230 6740
950 35 35 35 35 35 135 320 385 385 385 275 640 755 775 775 410 955 1160 1160 1160 685 1595 1930 1930 1930 1145 2655 3220 3220 3220 2055 4785 5795 5795 5795
1000 20 20 20 20 20 85 215 265 365 365 170 430 535 700 725 255 650 800 1050 1090 430 1080 1335 1750 1820 715 1800 2230 2915 3030 1285 3240 4010 5245 5450
1050 20 20 20 20 145 175 360 360 290 350 685 720 430 525 1030 1080 720 875 1720 1800 1200 1455 2865 3000 2160 2625 5155 5400
1100 20 20 20 20 95 110 305 300 190 220 610 605 290 330 915 905 480 550 1525 1510 800 915 2545 2515 1440 1645 4575 4525
1150 20 20 20 20 65 70 235 225 130 135 475 445 195 205 710 670 325 345 1185 1115 545 570 1970 1855 975 1030 3550 3345
1200 15 15 20 20 40 40 185 145 80 80 370 290 125 125 555 430 205 205 925 720 345 345 1545 1200 615 615 2775 2160
1250 20 145 295 440 735 1230 2210
1300 20 115 235 350 585 970 1750
1350 20 95 190 290 480 800 1440
1400 20 75 150 225 380 630 1130
1450 20 60 115 175 290 485 875
1500 15 40 85 125 205 345 620
Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6
Hydrostatic Testing Pressure (psig)
Shell 427,5 435 435 412,5 435 1110 1125 1125 1080 1125 2220 2250 2250 2160 2250 3330 3375 3375 3240 3375 5557,5 5625 5625 5400 5625 9255 9375 9375 9000 9375 1
Seat 313,5 319 319 302,5 319 814 825 825 792 825 1628 1650 1650 1584 1650 2442 2475 2475 2376 2475 4075,5 4125 4125 3960 4125 6787 6875 6875 6600 6875 12221
Seat 21,6 21,8 21,8 21,8 22,0 56,2 56,9 56,9 56,9 56,9 112,3 113,7 113,7 109,2 113,7 168,5 170,6 170,6 163,8 170,6 280,8 284,5 284,5 273,0 284,5 468,1 474,0 47
6,4 620,6 646,4 1148,9 1163,6 1163,6 1116,9
4,0 455,1 474,0 842,5 853,3 853,3 819,1 853,3
1163,6
12375 12375 11880 12375
6665 16875 16875 16200 16875
20
Fig. 107 Welding end detail for joint without backing ring
for use on 0.88 in. (22 mm) and thinner nominalwall thickness.
Fig. 108 Welding end detail for joint without backing ring
for use on nominal wall thickness greater than0.88 in. (22 mm).
Fig. 109 Welding end detail for joint using continuous
rectangular backing ring.
Fig. 110 Welding end detail for joint using continuous
tapered backing ring.
Notes
1 Dotted lines denote maximum envelope for transition
from welding bevel and root face into body of component.
2 Contour within the envelope is manufacturer's option
unless otherwise specifically ordered.
3 See ASME B16.25 Section 5 for tolerances other than
those given in these figures.
4 Intersections should be slightly rounded.
5 Linear dimensions are in inches with metric values
shown in millimeters in parenthesis.
6 All dimensions given in these two pages 28 and 29 are
for customer's convenience only. Actual and binding
values are the ones prescribed by original Standard.
Legenda
A = Nominal outside diameter of component at welding
end, for cast steel valve.
B = Inside diameter at welding end.
C = Inside diameter at welding end, using backing ring.
t = Nominal wall thickness of the pipe.
BONETTIQuality Valves & Level Gauges
21
Dimension of Welding ends1 2 4 5 6 7 4 5 6 7
NominalPipe Size
PipeSchedule No.
English Units Metrical Units
A B C t A B C t
2.1/2
4080
160XXS
2.96
2.4692.3232.1251.771
2.4792.3512.1781.868
0.2030.2760.3750.552
75
63595445
62,9559,7055,3047,45
5,157,009,55
14,00
3
4080
160XXS
3.59
3.0682.9002.6242.300
3.0812.9342.6922.409
0.2160.3000.4380.600
91
78746758
78,2574,5068,4061.20
5,507,6011,1515,.25
3.1/24080
4.123.5483.364
3.5643.402
0.2260.318
1059085
90,5586,40
5,758,10
4
40 80120160XXS
4.62
4.0263.8263.6243.4383.152
4.0443.8693.6923.5303.279
0.2370.3370.4380.5310.674
117
10297928780
102,7098,2593,8089,6583,30
6,008,5511,1513,5017,.10
5
4080
120160XXS
5.69
5.0474.8134.5634.3134.063
5.0704.8664.6474.4284.209
0.2580.3750.5000.6250.750
144
128122116110103
128,80123,60118,05112,45106,90
6,559,55
12,7015,9019,.05
6
4080
120160XXS
6.78
6.0655.7615.5015.1874.897
6.0945.8285.6005.3265072
0.2800.4320.5620.7190.864
172
154146140132124
154,80148,05142,25135,30128,85
7,1010,9514,2518,2521,.95
8
406080
100120140XXS160
8.78
7.9817.8137.6257.4377.1877.0016.8756.813
8.0207.8737.7097.5447.3267.1637.0536.998
0.3220.4060.5000.5940.7190.8120.8750.906
223
203198194189183178175173
203,70199,95195,80191,60186,10181,95179,15177,75
8,2010,3012,7015,1018,2520,6022,2523,00
10
406080
100120140160
10.94
10.0209.7509.5629.3129.0628.7508.500
10.0709.8349.6709.4519.2328.9598740
0.3650.5000.5940.7190.8441.0001.125
278
255248243237230222216
255,80249,80245,60240,05234,50227,55222,00
9,2512,7015,1018,2521,4525,4028,60
12
STD40XS6080
100120140160
0,567361
12.00011.93811.75011.62611.37411.06210.75010.50010.126
12.05311.99911.83411.72511.50511.23210.95910.74010.413
0.3750.4060.5000.5620.6880.8441.0001.1251.312
329
305303298295289281273267257
306,15304,75300,60297,80292,25285,30278,35272,80264,50
9,5510,3012,7014,2517,5021,4525,4028,6033,30
14
STD40XS6080
100120140160
14.25
12.25013.12413.00012.81212.50012.12411.81211.50011.188
13.30313.19213.08412.92012.64612.31812.04411.77111.498
0.3750.4380.5000.5940.7500.9381.0941.2501.406
362
337333330325318308300292284
337,90335,10332,35328,15321,20312,90305,90299,00292,05
9,5511,1512,7015,1019,0523,8527,8031,7535,70
16
STD406080
100120140160
16.25
15.25015.00014.68814.31213.93813.56213.12412.812
15.30315.08414.81114.48214.15513.82613.44213.170
0.3750.5000.6560.8441.0311.2191.4381.594
413
387381373364354344333325
388,70383,15376,20367,85359,55351,20341,45334,50
9,5512,7016,6521,4526,2030,9536,5540,50
18
STDXS406080
100120140160
18.28
17.25017.00016.87616.50016.12415.68815.25014.87614.438
17.30317.08416.97516.64616.31815.93615.55315.22514.842
0.3750.5000.5620.7500.9381.1561.3751.5621.781
464
438432429419410398387378367
439,50433,95431,15422,80414,50404,75395,05386,70377,00
9,5512,7014,2519,0523,8529,3534,9539,6545,25
20
STDXS406080
100120140160
20.31
19.25019.00018.81218.37617.93817.43817.00016.50016.062
19.30319.08418.92018.53818.15517.71717.33416.89616.513
0.3750.5000.5940.8121.0311.2811.5001.7501.969
516
489483478467456443432419408
490,30484,75480,55470,85461,15450,00440,30429,15419.45
9,5512,7015,1020,6026,2032,5538,1044,4550,00
22
STDXS6080
100120140160
22.34
21.25021.00020.25019.75019.25018.75018.25017.750
21.30321.08420.42819.99019.55319.11518.67818240
0.3750.5000.8751.1251.3751.6251.8752.125
567
540533514502489476464451
541,10535,55518,85507,75496,65485,50474,40463,30
9,5512,7022,2528,6034,9541,3047,6554,00
24
STDXS30406080
100120140160
24.38
23.25023.00022.87622.62422.06221.56220.93820.37619.87619.312
23.30323.08422.97522.75522.26321.82621.28020.78820.35019.857
0.3750.5000.5620.6880.9691.2191.5311.8122.0622.344
619
591584581575560548532518505491
591,90586,35583,55578,00565,50554,40540,50528,00516,90504,35
9,5512,7014,2517,5024,6030,9538,9046,0052,3559,55
22
23
CNC Machining Center for valves up to size 36”CNC Machining Center for valves up to size 36”
CNC Machining Center for valves up to size 18”CNC Machining Center for valves up to size 18”
Gate 14” ASME Class 2500Gate 14” ASME Class 2500Gate 14” ASME Class 1500Gate 14” ASME Class 1500
in ASTM A217 C12A materialin ASTM A217 C12A material
Gates 12” ASME Class 1500Gates 12” ASME Class 1500
Gates 3” and 4” ASME Class 2500 in ASTM A182 F91 drop-forged materialGates 3” and 4” ASME Class 2500 in ASTM A182 F91 drop-forged materialGate 28” ASME Class 900Gate 28” ASME Class 900
under Hydrostatic pressure testunder Hydrostatic pressure test
Gates 8” ASME Class 4500Gates 8” ASME Class 4500
Copyright © Cesare Bonetti. All rights reserved.
Unless otherwise indicated, all materials on these pages are copyrighted by Cesare Bonetti S.p.A. All rights reserved. Any reproduction, modification, storage in a retrieval system or retransmission, in any
form or by any means, electronic, mechanical or otherwise is strictly prohibited.
Suzhou - Jiangsu | ChinaLimburg an der Lahn | Germany Garbagnate Milanese (MI) | Italy Vapi - Gujarat | India
Publication CB-PC-10- Rev.00
BONETTIQuality Valves & Level Gauges
Cesare Bonetti S.p.A.
20024 Garbagnate Milanese,
Via Cesare Bonetti 17, Italy.
Cesare Bonetti India Pvt. Ltd.
Survey No. 36, 39 & 42, On N.H. No. 08,
Karambele, Vapi - 396 105 Gujarat - India.
Tel : +91-260-6634000
Bonetti Armaturen GmbH & Co. KG.
D-65549 Limburg an der Lahn,
In Den Fritzenstucker, 4. Germany.
Cesare Bonetti (Suzhou) Level Gauges & Valves Co. Ltd.
No. 8, Lane 1, Wupu Road, Shengpu District,
Suzhou Industrial Park, Jiangsu, China - 215 126.
Local Sales: Tel.: +39-02 99072333, Fax : +39-02 99072300
Email : [email protected]
Export Sales: Tel.: +39-02 99072444, Fax : +39-02 99072400
Email : [email protected]
Website : www.cesare-bonetti.com
Sales Office: Tel.: +91-22-27751851
Email : [email protected]
Website : www.cesare-bonetti.com
Sales Office: Tel.: +49-06431 598310, Fax : +49-06431 598329
Email : [email protected]
Website : www.bonetti.de
Sales Office: Tel.: +86-512-62816396, Fax : +86-512-62816393
Email : [email protected]
Website : www.cesare-bonetti.cn
Dealer
Distributors
Agent
Factories
Iceland
Canada
United States
Mexica
Venezuela
UnitedKingdom
Norway
Sweden
Finland
Russia
Indonesia Papua NewGuinea
Australia NewZealand
Thailand
Mongolia
ChinaSouth Korea
Japan
India
Afghanistan
Pakistan
Kazakhstan
Madagascar
South Africa
Botswana
Namibia
Angola
Tanzania
KenyaDR Congo
Ethiopia
SudanChad
Nigeria
NigerMali
AgeriaLibya
Egypt
South Araiba
Iraq
Spain Turkey
UkrainePoland
Germany
FranceItaly
A Complete International sales network, covering more than 70 countries across the world.
uandvc
reativ
ess
.com