Tactical Audio Accessories
631-567-3733 [email protected] www.cjcomponents.com
Customer SpecificCJ designs, modifes and manufactures handsetsto meet the customers or users specific needsand radio or telephone specifications.
Cost EffectiveAs CJ manufactures the actual internal components of the handset, modifying offers a cost effective wayof designing a new handset.
Proven Rugged DesignEach handset uses an already proven design incorporatinga polycarbonate glass compound housing to endurevibration and harsh environments.
ReliabilityPush-toTalk switch offers quiet operation during make/breaksequence and a molded strain releif produces added reliability.
ErgonomicThe handsets are lightweight and ergonomic, slim at the earphoneto fit underneath a tactical combat helmet. Has molded clothing clipfor easy attachment to the lapel or helmet strap.
CJ-H-250 Series Handsets
Tactical Audio Accessories
631-567-3733 [email protected] www.cjcomponents.com
Designed For Direct Replacement of Standard H-250/U Handsets Standard Handset used on Codan HF 2110 Manpack Radios This handset is specially designed and modified for use with most military radio systems used worldwide.
CJ-H-250 Series Handsets
CJ-H-250 Handset
Special PTT and Cover Plate Design: Specially designed PTT switch bezel assembly and wiring cover plate are made so that there are no exterior metal parts to prevent RF burn.
Microphone Type: Dynamic, Noise Canceling Impedance: 150 Ohms Frequency Range: 300 to 3500 Hz Sensitivity: -56 dB Specification: MIL-PRF-49078A
Speaker: Type: Dynamic Impedance: 1000 Ohms + / - 10 Ohms @ 1 kz Frequency Response: 100 to 3500 Hz Specification: MIL-PRF-49078A
Interface: 30.48 cm retractile cable, which extends to 182.88 cmterminated with a M55116/1 thumbrail audio connector (5 pin).
Material: Polycarbonate Glass Weight: 317.5 Grams
Environmental: Operating Temperature: -40 to +65 C Storage Temperature: -55 to +70 C Immersion: 1 Meter / 2 Hours MIL-STD-810
Designed For Harris Falcon I, II and III RadiosThis handset is specially designed and modified for use with the Harris Falcon I, II and II Radio Systems.Approved by the U.S. Defense Logistics Agency
Microphone
Type: Dynamic, Noise CancelingImpedance: 150 OhmsFrequency Range: 300 to 3500 HzSensitivity: -56 dBSpecification: MIL-PRF-49078A
Speaker:
Type: DynamicImpedance: 1000 Ohms + / - 10 Ohms @ 1 kzFrequency Response: 100 to 3500 HzSpecification: MIL-PRF-49078A
Material:
Polycarbonate GlassWeight: 317.5 Grams
Interface:
30.48 cm retractile cable, which extends to 182.88 cmterminated with a CJ AP-125 (M55116/1) thumbrail audioconnector (5 pin).
Environmental:
Operating Temperature: -40 to +65 CStorage Temperature: -55 to +70 CImmersion: 1 Meter / 2 HoursMIL-STD-810
Tactical Audio Accessories
CJ-H-250-125 Handset5965-01-463-7915
631-567-3733 [email protected] www.cjcomponents.com
Designed For Harris RF-7800SPR Secure Personal RadiosWhen connected to the RF-7800S Rado, the CJ-H-250-7800SPR offers the warfighter the ability to use the radio with astandard handset configuration.
Microphone
Type: ElectretImpedance: 2200 Ohms +/- 20 %Frequency Range: 100 to 4500 HzSensitivity: -54 dBDirectivity: Noise Canceling
Speaker:
Type: DynamicImpedance: 150 Ohms + / - 20 %Frequency Response: 20 to 3500 HzSwnsitivity: 354 mV RMS +/- 20 %
Material:
Polycarbonate GlassWeight: 317.5 Grams
Interface:
30.48 cm retractile cable, which extends to 182.88 cmterminated with an custom molded audio conenctor.
Environmental:
Operating Temperature: -40 to +65 CStorage Temperature: -55 to +70 CImmersion: 1 Meter / 2 HoursMIL-STD-810
Available in following configurations:- PTT with volume control (Standard)- No PTT / No volume control- PTT with volume control and external earphone
Tactical Audio Accessories
CJ-H-250-7800SPR Handsets
631-567-3733 [email protected] www.cjcomponents.com
Customer Specific:
The CJ-H-250ZA is custom made to meet the requirements as an audioaccessory for the South African Armed Forces.
Tactical Audio Accessories
Proven Rugged Design:
Each handset uses an already proven design incorporating apolycarbonate glass compound housing to endure vibration and harshenviroments.
Reliability:
Push-to-Talk (PTT) Switch offers quiet operation during make / breaksequence and a molded strain releif producs added reliability.
Ergonomic:
The handsets are lightweight and ergonomic, slim at th eearphone to firtunderneath a tactical combat helmet. The handset has a molded clothingclip for easy attachment to the lapel or helmet strap.
Special PTT and Cover Plate Design:
The PTT is designed with a switch bezel assembly and wiring cover platemade so that there are no exterior meatl parts to prevent RF burn.
CJ-H-250ZA Handset
631-567-3733 [email protected] www.cjcomponents.com
CJ-H-250ZA Handset
CJ-H-250ZA Handset