CHANNEL TRAY SYSTEM
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
2
35
46
67
Section Page
Marine Channel
Flatbar Ladder Tray
C-Rail Leg-In Ladder Tray
I-Beam Ladder Tray
MARINE & OFFSHORE CABLE TRAY SYSTEMS
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Important notice: "The information contained within this catalog is for ILLUSTRATION PURPOSES ONLY. Product and usespecifications and engineering data are not provided in this catalog, but are available upon request. Product application and fitnessfor particular purpose is determined solely by the customer and its engineering department and consultants. All product designs,dimensions, specifications, tolerances, performance, and similar characteristics are subject to change without notice."
- 2 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com ©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Available in the following material finishes:Aluminum
Hot Dipped GalvanizedStainless Steel
Marine Channel
1-1/4”
2”
3”
Marine Channel
- 3 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
1-1/4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Channel Tray Part Numbering SystemExample Part No.: O1-HG600C125
O1-HG 600 C 125
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumHG Hot Dipped GalvanizedSS 316 Stainless Steel
3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
4 Tray TypeC Channel
5 Depth125 = 1-1/4”
- 4 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel
Straight Section1-1/4” Deep
Example Part No.: O1-HG600C125
Features:1. Return flange offers a protective edge for cable roll-out and
a stronger channel.2. Perforations accept 5/8” coated band for securing cables.3. Straight sections supplied in 10’ lengths.
End View
1-1/
4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Marine Channel
- 5 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
1-1/4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Channel Tray Cover Part Numbering SystemExample Part No.: O1-SS600CFCC
O1-SS 600 C FCC
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedSS 316 Stainless Steel
3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
4 Tray TypeC Channel
5 Cover TypeFCC Flat Flanged Closed Cover
Cover
Note:Supplied in 10’ lengths
- 6 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel
DEPTH
WIDTH
End View
1-1/
4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Cover Clamp Part Numbering SystemExample Part No.: O1-SS601CCC
O1-SS 601 C CC
2 3 4 5 61
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedSS 316 Stainless Steel
3 Width30 = 3”40 = 4”60 = 6”80 = 8”90 = 9”
100 = 10”120 = 12”180 = 18”240 = 24”
5 Tray TypeC Channel
6 Accessory TypeCC Cover Clamp
4 Depth1 = 1-1/4”
Note:Includes Hardware
Marine Channel
- 7 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
1-1/4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Channel Tray Fitting Part Numbering SystemExample Part No.: O1-HG601CHE
O1-HG 601 CHE
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumHG Hot Dipped GalvanizedSS 316 Stainless Steel
3 Width30 = 3”40 = 4”60 = 6”80 = 8”90 = 9”
100 = 10”120 = 12”180 = 18”240 = 24”
5 Fitting TypeCHE Horizontal ElbowCHE-ADJ Adjustable Horizontal ElbowCOVE Vertical OutsideCIVE Vertical InsideCHT Horizontal TeeCHX Horizontal Cross
4 Depth1 = 1-1/4”
Features:1. Return flange offers a protective edge for cable roll-out and
a stronger fitting.2. Perforations accept 5/8” coated band for securing cables.3. Fittings include built in splice connection.4. All fittings include hardware.
- 8 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel
Example Part No.: O1-SS601CHECHE 90° Horizontal Elbow
CHE
CHE-ADJ
Example Part No.: O1-SS601CHE-ADJCHE-ADJ Adjustable Horizontal Elbow
CHT
Example Part No.: O1-SS601CHTCHT Horizontal Tee
1-1/
4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Marine Channel
- 9 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
1-1/4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Example Part No.: O1-SS601COVECOVE Vertical Outside
Feature: Adjustable
COVE
CIVE
Example Part No.: O1-SS601CIVECIVE Vertical Inside
Feature: Adjustable
- 10 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel1-
1/4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Channel Tray Fitting Cover Part Numbering SystemExample Part No.: O1-SS600CHE-C
O1-SS 600 CHE-C
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedSS 316 Stainless Steel
3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
4 Fitting TypeCHE Horizontal ElbowCOVE Vertical OutsideCIVE Vertical InsideCHT Horizontal TeeCHX Horizontal Cross
5 Cover TypeC Cover
Marine Channel
- 11 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
1-1/4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Splice Plate Part Numbering SystemExample Part No.: O1-HG-125-CN
O1-HG-125-CN
2 3 41
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumHG Hot Dipped GalvanizedSS 316 Stainless Steel
4 Accessory TypeCN Connector
3 Depth125 = 1-1/4”
Notes:1. Sold in pairs2. Includes hardware
- 12 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel1-
1/4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Horizontal Adjustable Plate Part Numbering SystemExample Part No.: O1-SS600CHAP
O1-SS 600 C HAP
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedHG Hot Dipped GalvanizedSS 316 Stainless Steel
3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
5 Accessory TypeHAP Horizontal Adjustable Plate
4 Tray TypeC Channel
Notes:Includes hardware
Marine Channel
- 13 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
1-1/4”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Vertical Adjustable Plate Part Numbering SystemExample Part No.: O1-SS600CVAP
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedHG Hot Dipped GalvanizedSS 316 Stainless Steel
3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
5 Accessory TypeVAP Vertictal Adjustable Plate
4 Tray TypeC Channel
Notes:Includes hardware
O1-SS 600 C VAP
1 2 3 4 5
2”
- 14 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Channel Tray Part Numbering SystemExample Part No.: O1-HG600C200
O1-HG 600 C 200
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumHG Hot Dipped GalvanizedSS 316 Stainless Steel
3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
4 Tray TypeC Channel
5 Depth200 = 2”
Marine Channel
- 15 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
2”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
2.0”
WIDTH
Straight Section2” Deep
Example Part No.: O1-HG600C200
Features:1. Return flange offers a protective edge for cable roll-out.2. Perforations accept 5/8” coated band for securing cables.3. Straight sections supplied in 10' lengths.
End View
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedSS 316 Stainless Steel
3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
4 Tray TypeC Channel
5 Cover TypeFCC Flat Flanged Closed Cover
End View
Channel Tray Cover Part Numbering SystemExample Part No.: O1-SS600CFCC
O1-SS 600 C FCC
2 3 4 51
Note:Supplied in 10’ lengths
- 16 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel2”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Marine Channel
- 17 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
2”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
End View
Cover Clamp Part Numbering SystemExample Part No.: O1-SS602CCC
O1-SS 602 C CC
2 3 4 5 61
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedSS 316 Stainless Steel
3 Width30 = 3”40 = 4”60 = 6”80 = 8”90 = 9”
100 = 10120 = 12”180 = 18”240 = 24”
5 Tray TypeC Channel
6 Accessory TypeCC Cover Clamp
4 Depth2 = 2”
Note:Includes hardware
- 18 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel2”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Channel Tray Fitting Part Numbering SystemExample Part No.: O1-HG602CHE
O1-HG 602 CHE
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumHG Hot Dipped GalvanizedSS 316 Stainless Steel
3 Width30 = 3”40 = 4”60 = 6”80 = 8”90 = 9”
100 = 10”120 = 12”180 = 18”240 = 24”
5 Fitting TypeCHE Horizontal ElbowCHE-ADJ Adjustable Horizontal ElbowCOVE Vertical OutsideCIVE Vertical InsideCHT Horizontal TeeCHX Horizontal Cross
4 Depth2 = 2”
Features:1. Return flange offers a protective edge for cable roll-out and
a stronger fitting.2. Perforations accept 5/8” coated band for securing cables.3. Fittings include built in splice connection.4. All fittings include hardware.
Marine Channel
- 19 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
2”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
CHE
CHE-ADJ
CHT
Example Part No.: O1-SS602CHECHE 90° Horizontal Elbow
Example Part No.: O1-SS602CHE-ADJCHE-ADJ Adjustable Horizontal Elbow
Example Part No.: O1-SS602CHTCHT Horizontal Tee
- 20 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel2”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Example Part No.: O1-SS602COVECOVE Vertical Outside
Feature: Adjustable
COVE
CIVE
Example Part No.: O1-SS602CIVECIVE Vertical Inside
Feature: Adjustable
Marine Channel
- 21 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
2”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Channel Tray Fitting Cover Part Numbering SystemExample Part No.: O1-SS600CHE-C
O1-SS 600 CHE-C
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedSS 316 Stainless Steel
3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
4 Fitting TypeCHE Horizontal ElbowCOVE Vertical OutsideCIVE Vertical InsideCHT Horizontal TeeCHX Horizontal Cross
5 Cover TypeC Cover
- 22 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel2”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Splice Plate Part Numbering SystemExample Part No.: O1-HG-125-CN
O1-HG-125-CN
2 3 41
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumHG Hot Dipped GalvanizedSS 316 Stainless Steel
4 Accessory TypeCN Connector
3 Depth125 = 1-1/4”
Notes:1. Sold in pairs2. Includes hardware
Horizontal Adjustable Plate Part Numbering SystemExample Part No.: O1-SS600CHAP
O1-SS 600 C HAP
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedHG Hot Dipped GalvanizedSS 316 Stainless Steel
3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
5 Accessory TypeHAP Horizontal Adjustable Plate
4 Tray TypeC Channel
Notes:Includes hardware
Marine Channel
- 23 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
2”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
- 24 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel2”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Vertical Adjustable Plate Part Numbering SystemExample Part No.: O1-SS600CVAP
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedHG Hot Dipped GalvanizedSS 316 Stainless Steel
3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
5 Accessory TypeVAP Vertictal Adjustable Plate
4 Tray TypeC Channel
Notes:Includes hardware
O1-SS 600 C VAP
1 2 3 4 5
Marine Channel
- 25 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
3”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Channel Tray Part Numbering SystemExample Part No.: O1-HG600C300
O1-HG 600 C 300
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumHG Hot Dipped GalvanizedSS 316 Stainless Steel
3 Width400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
4 Tray TypeC Channel
5 Depth300 = 3”
- 26 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel3”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Straight Section3” Deep
Example Part No.: O1-HG600C300
Features:1. Return flange offers a protective edge for cable roll-out and
a stronger channel.2. Perforations accept 5/8” coated band for securing cables.3. Perforations in the side rail add extra securing capabilities.4. Straight sections supplied in 10' lengths.
End View
Marine Channel
- 27 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
3”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedSS 316 Stainless Steel
3 Width400 = 4”600 = 6”800 = 8”900 = 9”
1000 = 10”1200 = 12”1800 = 18”2400 = 24”
4 Tray TypeC Channel
5 Cover TypeFCC Flat Flanged Closed Cover
End View
Channel Tray Cover Part Numbering SystemExample Part No.: O1-SS600CFCC
O1-SS 600 C FCC
2 3 4 51
Note:Supplied in 10’ lengths
- 28 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel3”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
End View
Cover Clamp Part Numbering SystemExample Part No.: O1-SS603CCC
O1-SS 603 C CC
2 3 4 5 61
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedSS 316 Stainless Steel
3 Width40 = 4”60 = 6”80 = 8”90 = 9”
100 = 10”120 = 12”180 = 18”240 = 24”
5 Tray TypeC Channel
6 Accessory TypeCC Cover Clamp
4 Depth3 = 3”
Notes:Includes hardware
Marine Channel
- 29 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
3”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Channel Tray Fitting Part Numbering SystemExample Part No.: O1-HG603CHE-90
O1-HG 603 CHE-90
1 2 3 4 5
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumHG Hot Dipped GalvanizedSS 316 Stainless Steel
3 Width40 = 4”60 = 6”80 = 8”90 = 9”
100 = 10”120 = 12”180 = 18”240 = 24”
5 Fitting TypeCHE Horizontal Elbow (45°, 90°)COVE Vertical Outside (45°, 90°)CIVE Vertical Inside (45°, 90°)CHT Horizontal TeeCHX Horizontal Cross
4 Depth3 = 3”
6 Fitting Angle45 45°90 90°
6
Features:1. Return flange offers a protective edge for cable roll-out and
a stronger fitting.2. Perforations accept 5/8” coated band for securing cables.
- 30 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel3”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
CHE-45
CHE-90
CHT
Example Part No.: O1-SS603CHE-45CHE-45 45° Horizontal Elbow
Example Part No.: O1-SS603CHE-90CHE-90 90° Horizontal Elbow
Example Part No.: O1-SS603CHTCHT Horizontal Tee
Marine Channel
- 31 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
3”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
CIVE-45
CIVE-90
Example Part No.: O1-SS603CIVE-45CIVE-45 45° Vertical Inside
Example Part No.: O1-SS603CIVE-90CIVE-90 90° Vertical Inside
- 32 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel3”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
COVE-45
COVE-90
Example Part No.: O1-SS603COVE-45COVE-45 45° Vertical Outside
Example Part No.: O1-SS603COVE-90COVE-90 90° Vertical Outside
Marine Channel
- 33 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
3”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Channel Tray Fitting Cover Part Numbering SystemExample Part No.: O1-SS603CHE-C
O1-SS 603 CHE-90-C
1 2 3 4 5 6 7
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumPG Pre-GalvanizedSS 316 Stainless Steel
3 Width40 = 4”60 = 6”80 = 8”90 = 9”
100 = 10”120 = 12”180 = 18”240 = 24”
5 Fitting TypeCHE Horizontal Elbow (45°, 90°)COVE Vertical Outside (45°, 90°)CIVE Vertical Inside (45°, 90°)CHT Horizontal TeeCHX Horizontal Cross
7 Cover TypeC Cover
6 Fitting Angle45 45°90 90°
4 Depth3 = 3”
- 34 -
2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com
Marine Channel3”
©2012 OCEAN-1 MARINE PRODUCTS, LTD.
Splice Plate Part Numbering SystemExample Part No.: O1-HG-300-CN
O1-HG-300-CN
2 3 41
1 Product CodeO1 Ocean-1
2 Material/FinishAL AluminumHG Hot Dipped GalvanizedSS 316 Stainless Steel
5 Accessory TypeCN Connector
3 Depth300 = 3”
Notes:1. Sold in pairs2. Includes hardware
LIMITED WARRANTY; LIMITATION OF LIABILITY
OCEAN-1 WARRANTS THAT THE PRODUCTS TO BE SUPPLIED HEREUNDER ARE MANUFACTURED IN ACCORDANCE WITH MANUFACTUR-ER’S APPLICABLE MATERIAL SPECIFICATIONS AND ARE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP USING MANUFACTUR-ER’S SPECIFICATIONS AS A STANDARD. ONLY SUCH PRODUCTS INSTALLED AND USED IN ACCORDANCE WITH APPLICABLE MANUFAC-TURER’S INSTRUCTIONS AND SPECIFICATIONS ARE IN ANY WAY WARRANTED BY OCEAN-1 OR MANUFACTURER. ALL OTHER CLAIMS AREWAIVED. THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY AND WARRANTY FROM OCEAN-1 AND THE MANUFACTURER. CUSTOMERAGREES NOT TO LOOK TO OCEAN-1 FOR ANY REMEDY IN CONNECTION WITH PRODUCTS NOT MANUFACTURED BY OCEAN-1, PROVIDEDTHAT OCEAN-1 HEREBY ASSIGNS TO CUSTOMER ALL MANUFACTURER’S WARRANTIES WITH RESPECT TO SUCH PRODUCTS, TO THEEXTENT ASSIGNABLE. THE PRODUCTS TO BE SUPPLIED HEREUNDER ARE NOT SOLD WITH ANY WARRANTIES, EXPRESS OR IMPLIED,INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHICH IMPLIED WAR-RANTIES ARE SPECIFICALLY DISCLAIMED. THIS LIMITED WARRANTY IS CUSTOMER'S SOLE AND EXCLUSIVE REMEDY. IT IS EXPRESSLYUNDERSTOOD AND AGREED THAT THE LIMIT OF OCEAN-1’S LIABILITY WITH RESPECT TO PRODUCTS SUPPLIED BY OCEAN-1 WILL BE, ATOCEAN-1’S OPTION, REPAIR OF THE DEFECTIVE PRODUCT OR RE-SUPPLY OF A LIKE QUANTITY OF NON-DEFECTIVE PRODUCT, AND SUP-PLIER SHALL NOT BE LIABLE FOR ANY DAMAGES WHICH ARE BASED UPON ALLEGED NEGLIGENCE, BREACH OF WARRANTY, STRICT LIA-BILITY OR ANY OTHER THEORY OTHER THAN THE LIMITED WARRANTY SET FORTH ABOVE. CUSTOMER WILL BE RESPONSIBLE FOR ALLLABOR AND SERVICE CHARGES THAT MAY BE INCURRED WITH RESPECT TO EITHER THE ORIGINAL OR REPLACEMENT PRODUCT. IN NOEVENT WILL OCEAN-1 OR MANUFACTURER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
©2012 OCEAN-1 MARINE PRODUCTS, LTD.