4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 1/11
Categories
All Products
Arduino
Audio
Development Tools
E-Textiles
LCDs&OLEDs
LEDs
Power Supply
Relay/Dimmer
Tools
Toys
3D Printer
Boards&Modules
Sensors
Prototyping
Robotics
Wireless/GPS
Accessories
Components
PCB/PCBA
Retired
Home » News » Change Bluetooth Audio Amplifier Name or Audio Tone
Change Bluetooth Audio Amplifier Name or Audio ToneChange Bluetooth Audio Amplifier Name or Audio Tone Change The BT Name
All of our Bluetooth audio amplifier boards and Bluetooth audio receiver boards use AudioB plus module as the core bluetooth receiver module.The default bluetooth name is "BT SPEAKER". Maybe you want change it to a special name. We just updated the AudioB plus design andbreakout the programming port. Now, you can change the BT name by yourself.
How to change the BT name of Bluetooth audio ampli�erHow to change the BT name of Bluetooth audio ampli�er
Arduino Audio Development Tools Relay/Dimmer Sensors Prototyping Robotics Wireless/GPS PCB/PCBA
Currency € £ $
Home Wish List (0) My Account Shopping Cart Checkout
Welcome visitor you can login or create an account.
Shopping Cart0 item(s) - $0.00
Search
4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 2/11
Hardware and Software required:
Tag-Connect line KitCSR USB-SPI programmerDownload Bluesuite2.5.0 and install it
Step1:
Connect the CSR USB-SPI programmer and Tag-Connect line with a AudioB Plus convert board, then connect CSR USB-SPI to your computerby a mini USB cable and windows will auto detect it and install the drivers.
Step2:
Connect TC2050-IDC-NL’s connector to AudioB plus programming port. You need to locate the single steel alignment pin of the connector intothe single hole of the PCB footprint, then press down softly to engage the spring-pin contacts. Make sure the first 6 pins have a good contactwith the corresponding pads. Then the blue led and red led will flashes alternately.
4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 3/11
Step3:
Make sure the connection is fine, then open PSTool in BlueSuite 2.5.0.
4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 4/11
Step4:
Choose "SPI BCCMD", and if the connection is fine, the CSR USB-SPI device will show in “Port”, then click "OK".
Step5:
Next, Input “name” in "Filter", then choose the option named “Local device’s ‘user friendly’ name”, the text box on the right will show the currentname of Bluetooth module(default is “BT Speaker”), if you want to change it, just input the new name in this text box. For example, here we input "TinySine Audio" then click “Set” to complete the change. Finally, close the program.
4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 5/11
Note:
1. If you haven’t installed CSR BlueSuite 2.5.0 on your computer, please download it here and install it. During the process of installation, youneed to check the option "set debug transport the USB SPI".
2. You may need to install the driver for CSR USB-SPI programmer on your computer. For 32 bit system:
C:\Program Files\CSR\BlueSuite 2.5.0\drivers\win32 For 64 bit system: C:\Program Files\CSR\BlueSuite 2.5.0\drivers\win64
Remove The Audio Tone
Hardware and Software required:
4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 6/11
Tag-Connect line KitCSR USB-SPI programmerDownload Bluesuite2.5.0 and install itDownload CSRXX_ROM_ConfigTool and install it
Step1:
Connect the CSR USB-SPI programmer and Tag-Connect line with a AudioB Plus convert board, then connect CSR USB-SPI to your computerby a mini USB cable and windows will auto detect it and install the drivers.
Step2:
Connect TC2050-IDC-NL’s connector to AudioB plus programming port. You need to locate the single steel alignment pin of the connector intothe single hole of the PCB footprint, then press down softly to engage the spring-pin contacts. Make sure the first 6 pins have a good contactwith the corresponding pads. Then the blue led and red led will flashes alternately.
Step3:
Make sure the connection is fine, then open Config Tool.
4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 7/11
Step4:
Click “Open From Device” to read the chip information. Then goes into "Audio Tones" page after Read Device Successful. You will find 4 audiotones in the chip.
Step5:
Click “Remove” to delete 1-3 of them. You must keep at least one audio tone or will damage the chip. Then click "Write Device".
4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 8/11
Step6:
You have removed the audio tone successful. Close Config Tool program and remove the CSR USB-SPI programmer from your AudioB plusmodule.
Remove The Audio Tone (APTX)
Hardware and Software required:
Tag-Connect line KitCSR USB-SPI programmerDownload Bluesuite2.5.0 and install itDownload CSRA64xxx and CSRA63xxx Tools and install it
Step1:
Connect the CSR USB-SPI programmer and Tag-Connect line with a AudioB Plus convert board, then connect CSR USB-SPI to your computerby a mini USB cable and windows will auto detect it and install the drivers.
Step2:
Connect TC2050-IDC-NL’s connector to AudioB plus programming port. You need to locate the single steel alignment pin of the connector intothe single hole of the PCB footprint, then press down softly to engage the spring-pin contacts. Make sure the first 6 pins have a good contactwith the corresponding pads. Then the blue led and red led will flashes alternately.
4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 9/11
Step3:
Make sure the connection is fine, then open CSRA64xxx Configuration Tool
Step4:
4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 10/11
Please select the corresponding version of the chip in the left upper first drop-down menu, select USB SPI (180063) in the second dropdownmenu, and then click “Read Device” to read chip configuration data from the AudioB plus circuit board .
Step5:
After reading the modue information, in the most left Set Configuration in order to start: User Interface → Tones→ Event Tonesr, You can find atotal of eight kinds of audio tones.
Step6:
Click “Delect” to delete any of them. You must keep at least one audio tone or will damage the chip. Then click "Write Device".
Step7:
4/17/2019 Change Bluetooth Audio Amplifier Name or Audio Tone
https://www.tinyosshop.com/index.php?route=information/news&news_id=42 11/11
All News
InformationAbout TinySineDelivery InformationPrivacy PolicyWarrantyDistributors
Customer ServiceContact UsReturnsSite Map
ExtrasBrandsGift VouchersAffiliatesSpecials
My AccountMy AccountOrder HistoryWish ListNewsletter
You have removed the audio tone successful. Close Config Tool program and remove the CSR USB-SPI programmer from your AudioB plusmodule.
Tags:
Powered By TinyosTinysine (Tinyos) Electronics © 2019