www.championtimber.comTh
eO
ualit
yTi
mbe
rMer
chan
ts
~
Unrivalled Quality…Unrivalled Range…Unrivalled Service…
Sheet Materialand Insulation
Champion Timber
02 www.championtimber.com
Why choose Champion for your Timber?We’re the South East’s leading independent timber specialists with over 75 yearsexperience of supplying the building trade. Recently voted again one of the UK’stop performing timber merchants in a customer survey by TRADA*, we’rededicated to providing you, the professional, with the range and quality of timberthat will save you time and money.*TRADE KPI Customer Survey 2003, 2004 and 2006
Quality of product• For our Softwood Planed Timber and Mouldings, we only use prime quality
timber, then re-grade and machine it at our extensive Edenbridge mill to meetour own stringent standards.
This is sourced and imported from the most responsibly managed Nordicforestry companies.
• On-going investment in technology ensures quality, accuracy, consistency andwith our Planed Timber and Mouldings, a super smooth finish. This guaranteesyou minimal preparation and wastage, so you save time and money.
Range and breadth of stock• Machining our own timber ensures all of our branches carry a vast range of
profiles and extensive stocks, all properly kiln dried. This ensures a continualsupply of stock always ready to go for your next job.
• Our selection of around 15000 timber and timber related products ensuresmore choice and provides a credible single source solution saving youvaluable time and money
High standards of customer service• As accredited Investors in People, Champion employs helpful, knowledgeable,
motivated staff who benefit from on-going training and developmentcontinuously improving our customer service.
• Unusual or ‘one off’ jobs are no problem as we offer a prompt machine-to-orderservice from our own mills.
• Reliable, local deliveries, please contact your local branch for more details.
Always keeping ahead• As an independent company, we anticipate and react quickly to changing
customer demands and product improvements.
• We comply with all British and International regulations and guidelinesregarding sustainability of timber resources and have a clearly definedenvironmental policy.
• Nine branches already in Surrey and Kent, with more planned.
To obtain an estimate or to place anorder there are four easy options:1. Visit your local branch, we’re ready to serve you.2. Telephone your local branch, we’re ready for your call.3. Fax your request or order to your local branch.4. Email your local branch with your request or order.
Please note we accept: Visa, Mastercard,Switch/Maestro, TradePro cards. Branch details are on the reverse of this brochure.
Product range:
Timber ProductsBlockboard
Chipboard
Claddings
Cut to size Sheet Material
Decorative Boards
Decking
Doors
Fencing
Fire Rated Boards
Flooring
Glulam Laminated Beams
Hardboard
Hardwood
Insulation
Joinery
Laminates
MDF Boards
Melamine Faced and
Wood Veneered Chipboard
Oriented Strand Board
Pine Board
Plasterboard
Plywood
Sawn Softwood
Staircase Parts
Softwood Mouldings
Softwood Planed
Thermowood
Timber Buildings
Velux
Worktops
Windows
Timber AccessoriesAdhesives
Bolts
Brackets
Corrugated PVC
Decorators Aids
Door and Window furniture
Fixings
Hand Tools
Hangers
Ironmongery
Locks and Security
Mastics
Nails
Paint
Power Tools
Screws
Woodcare Products
Branch Distribution Centre – Edenbridge
Extensive range of timber in stock
Investment in technology
Profile design and matching service
Reliable deliveries
Excellent customer serviceTTF
TT-COC-1996 1996 FSC A.C.Look for FSC labelled productsFSC SupplierThe Global Benchmark forResponsible Forest Management
c
/16-37-034
Contents Cont
ents
CHAMPION at your SERVICE
Again voted by you, ourcustomers, as one of the
TOP PERFORMING TIMBERMERCHANTS in the UK
(TRADA Survey)
03
CE Certification and Marking of Panel Products and InsulationSo as to introduce universally accepted standards and thereby make trading easier between member states, the European Union has introduced CEmarking. The CE mark is confirmation that a product has been independently tested and certified as complying with the new product standard and is ‘fit for the purpose’ for which it is intended.
For panel products and insulation, the Construction Panel Directive (CPD) was set up by the industry to set standards for testing and essentialrequirements that should be considered where relevant, these being
• mechanical resistance and stability • hygiene, health and the environment • protection against noise
• safety in use • safety in case of fire • energy, economy and heat retention
The CE mark does not necessarily have to appear on every board, but can still be sold as CE or CPD compliant. If official written confirmation isrequired of compliancy, contact the Buying Department at New Malden Head Office on 020 8949 1621.
Further on in this brochure, those products that are CE/CPD compliant are identified as such under their respective headings.
‘CE’ Product Marking 03
Building RegulationsPart ‘L’ 2006
Conservation of Fuel and Power 04Examples to meet Part ‘L1B’ 05-06
Insulation Products
Rockwool Roll 07Rockwool Flexi-Slab 07Rockwool RWA45 Semi Rigid Slabs 07Rockwool Cavity Wall Batts 07Glass Fibre Rolls 07Celotex GA3000Z, Therma-Break and XR3000 08Kingspan Thermapitch TP10 08Actis Tri-Iso Super 10 09Expanded Polystyrene 09Superquilt 09Thinsulex 09Kingspan Thermaroof TR31 10Celotex Tempchek TD3115 10
Building Regulations Part 'E' 2004
Resistance to the Passage of Sound 11
Acoustic Insulation Products
Rockwool Flexi-Slab 11Reduc 12Monarfloor 13Acoustilay 14Attenu8 14
Fire Rated Sheet Material
Pyrok & Viroc or similar 15
Masterboard 15
Supalux 15
MDF FR Euro Class B & C 15
WBP Hardwood PlywoodFR Euro Class B & C 15
Water & Fire Resistant Sheet Material
Hardibacker 15
Plasterboard & Accessories
Standard 16
Foil Backed Vapour Check 16
Plank 16
Soundshield 16
Thermal Laminate 16
Phenolic Laminate 17
Moisture Resistant 17
Firecheck 17
Drywall Screws 17
Coving 17
Accessories 17
Chipboard
Standard 18
Flooring Grade T & G Type P5 18
Oriented Strand Board (OSB) 18
Blockboard 18
Door Blanks 18
Plywood
WBP Hardwood 19
WBP Birch 19
Flexible 19
BBA Approved Construction 19
Shuttering 19
T & G Flooring 19
Marine 19
Medium Density Fibreboard(MDF)
Standard 20
Light 20
V313 Moisture Resistant 20
Medex Exterior 20
ZF Ecologique 20
Bead & Butt V313Moisture Resistant 20
Flexible 20
Pre-Cut Handi-Panels
WBP Hardwood Plywood 21
MDF 21
Cut to size Service 21
Hardboard
Standard 21
Oil Tempered 21
Perforated 21
Insulation Board 21
Pinboard 21
Sundeala 'K' 21
Floor Protection Board 21
Screen Panel 22
Decorative MDF 22
Topan Coloured V313 Moisture Resistant 22
Melamine 2 Sides 22
Lacquered 1 Side 22
Wood Veneered 23
Wood Veneered Edging 23
Wood Veneered & Melamine Faced Chipboard 24 & 25
Iron-on edging 25
Wood Veneer
Flexible Veneer 26
Bonded Laminates 26
Solid Wood PanelPine Panel 26Pine Stringer 26
Pine Stair Tread 26
Oak Panel 26
Worktops
Postform Laminate 27
Solid Hardwood 27
Branch Maps & Contact Details Back Cover
WIDE RANGE with BIG STOCKS• FREE DELIVERY - to a wide area• CUT TO SIZE SHEET MATERIAL - first 2 cuts FREE• RANGE OF LENGTHS OFFERED - reduces waste • SPECIALS OUR SPECIALITY - with our Timber Profiling and
Pattern Matching service• OUR BRANCHES STOCK - all the Fixtures, Fittings, Finishes and Tools
to go with your Timber and Sheet Material
Part L1B - Work on Existing Dwellingseg. extensions, refurbishment andmaterial change of useWith the 2006 regulations, meeting the required U-value ofan element still applies
A guide to U-Values to be achieved in existing buildings to meet Part L1B (Dwellings)
NEW ELEMENTS - Thermal Bridging & Air LeakagePart L1B requires that the construction be built avoiding any thermal bridgingin the insulation layers and that attention be given to reducing air leakage.
RENOVATED ELEMENTSWhere more than 25% of the surface area of a thermal element is beingrenovated, a way of showing compliance to Part L1B is to upgrade the wholeof the element to meet the required U-Value.
RETAINED ELEMENTSRetained Elements is either as a result of a material change of use or wherean element became a thermal element as part of the thermal envelope, whenpreviously it was not. Where the U-Value of a retained thermal element is worsethan the threshold U-Value, the thermal element should be upgraded to achievethe stated U-Value. Variations may apply where the increased insulation mayreduce the usable floor area by more than 5%, or where it will create difficultieswith adjoining floor heights, or where the weight of the additional insulationmight not be supported by the existing structure.
Building Regulations Part ‘L’ 2006Conservation of Fuel and Power
04 www.championtimber.com
In summary for New Build this means:• Part ‘L’ Compliance for new build is no longer met by just achieving
specific U-Values
• All aspects of the build design are now major factors with more emphasis on quality of build.
• Builders will require early input and greater technical support at design stage.
• There MUST BE significant improvement in U-Values
• Excessive air leakage dramatically affects fabric performance.
R-value - is the Thermal Resistance (m2K/W) of a component and iscalculated by dividing the thickness expressed in metres, by its thermalconductivity.
U-value - is an expression for the amount of heat that passes through asquare metre of building element. The lower the U-value, the lower the heatloss. U-value is calculated as the reciprocal of the sum of the thermal resistance (R-value) of each component including any cavities. i.e.
(0.35 U-Value)Full-fill Cavity75mm Rockfibre cavitywall slab
(0.25 U-Value)50mm PUR/PIR rigid foamBlock & beam T&G chipboard finish
Brick outer skin
Blockwork 3.5N
Plaster
(0.16 U-Value)100mm Rock fibreinsulation betweenjoists
150mm Rock fibreinsulation over joists
As Built 2002
(0.28 U-Value)Full-fill Cavity100mm Rockfibre cavitywall slab
(0.22 U-Value)65mm PUR/PIR rigid foamBlock & beam T&G chipboard finish
Brick outer skin
Blockwork(Lambda value 0.15)
Plaster
(0.14 U-Value)100mm Rock fibreinsulation between joists
200mm Rock fibreinsulation over joists
CompliantPart L 2006
(0.35 U-Value)Full-fill Cavity75mm Rockfibre cavitywall slab
(0.25 U-Value)50mm PUR/PIR rigid foamBlock & beam T&G chipboard finish
Brick outer skin
Blockwork 3.5N
Plaster
(0.16 U-Value)100mm Rock fibreinsulation betweenjoists
150mm Rock fibreinsulation over joists
As Built 2002
(0.28 U-Value)Full-fill Cavity100mm Rockfibre cavitywall slab
(0.22 U-Value)65mm PUR/PIR rigid foamBlock & beam T&G chipboard finish
Brick outer skin
Blockwork(Lambda value 0.15)
Plaster
(0.14 U-Value)100mm Rock fibreinsulation between joists
200mm Rock fibreinsulation over joists
CompliantPart L 2006
WALLS - Full-fill: Brick outer skin - 75mmcavity filled with Rock fibre Cavity Batts - 3.5N inner blockwork plastered.
FLOOR - Block and beam with 50mm PUR/PIRrigid foam and T&G Chipboard Decking.
ROOF - Concrete tiles over rafters with 100mmRock fibre quilt between joists and 150mmover.
GLAZING - UPVC double glazed windows usinglow-e soft glass.
HEATING - Gas fired condensing boiler (86%efficiency) with balanced flue supplying bothheating and hot water.
WALLS - Full-fill: Reduce the U-value to 0.28.Change the 75mm Rock fibre cavity wall slab to100mm. Change the medium density blockworkto a Lambda value of 0.15 W/mK.
FLOOR - Reduce the U-value to 0.22. Changethe 50mm PUR/PIR rigid foam to 65mm.
ROOF - Reduce the U-value to 0.14. Change thetop layer of 150mm Rock fibre to 200mm.
GLAZING - UPVC double glazed windows usinglow-e soft glass.
HEATING - Gas fired condensing boiler (90%efficiency) with balanced flue supplying bothheating and hot water.
U-value = 1(W/m2k) Total sum of R-values
U-VALUES NEW ELEMENTS EXISTING ELEMENTSTO BE ACHIEVEDELEMENT EXTENSIONS & REPLACEMENT RENOVATED RETAINED THRESHOLD
NEW ELEMENTS ELEMENTS ELEMENTS ELEMENTS (Upgraded) U-VALUE
Wall-Cavity 0.30 0.35 0.35 0.55 0.70
Wall-Other type 0.30 0.35 0.35 0.35 0.70
Floor 0.22 0.25 0.25 0.25 0.70
Roof-Flat 0.20 0.25 0.25 0.25 0.35
Roof-Sloped 0.20 & 0.20 0.20 & 0.25 0.20 & 0.25 0.20 & 0.25 0.35integral integral integral integral
Roof-Loft (joist) 0.16 0.16 0.16 0.16 0.35
Conservation of Fuel and Power - requires much more than just good insulation
Updated in April 2006, Part 'L' sets out to make buildings more energy efficient,
saving an estimated 1 million tonnes of carbon a year in the UK. For new build
energy performance standards have been increased by 20% to 28% over the
old 2002 regulations and are now based on the 'whole building' Target CO2
emission rate rather than meeting stand alone Elemental 'U' values. However
on extensions and refurbishment work to existing buildings the Elemental
U-value route may be used to show compliance.
The new Part 'L' is split into 4 parts
• L1A New Dwellings
• L1B Work on Existing Dwellings
• L2A New Buildings, other than Dwellings
• L2B Work on Existing Buildings, other than Dwellings
Part L1A - New Build for DwellingsFive processes the designer/builder must go through to showcompliance with Part 'L' of the Building Regulations
1. CALCULATE THE CO2 EMISSIONS: An Energy Performance
Certificate must be produced using the SAP 2005 (new dwellings)
or SBEM (non-dwellings) software.
2. DESIGN LIMITS REQUIRED: The thermal performance of the
building envelope, the boiler efficiency, hot water and lighting must
be within stated limits.
3. LIMIT SOLAR GAINS IN SUMMER: eg. by controlling the size of
windows to reduce the need for air conditioning.
4. DEMONSTRATE THAT THE QUALITY OF CONSTRUCTION HAS
BEEN ACHIEVED: By adopting Accredited Construction Details which
covers thermal bridging etc and in most cases having an air test
carried out.
5. PROVIDE INFORMATION FOR THE BUILDING USER: Supply
simple operating and maintenance instructions on usage of heating
and water systems.
Example of differences between identical newbuildings, one built in 2002 and one in 2006
Loft Conversion in a Pitched RoofPitch of the roof - required to meet a U-Value of 0.20 W/m2KWhere existing rafters are 150mm deep
• Existing tiles on tile batten on roof felt/membrane over rafters -
check for damage and make good.
• 100mm Celotex XR3000 fixed between rafters using either Celotex
Fixing Clips or 25 x 50mm Treated Batten as stops. Important to
maintain a 50mm ventilation gap above insulation.
• Fix 40mm Celotex GA3000Z underneath to rafters. Overlap joints.
Use Foil Tape to cover face joints.
• Fix 12.5mm Plasterboard through Celotex to rafters.
Alternative to illustration above - Where existing rafters are 100mm deep - batten out rafters to 150mm deep
Or alternatively:
• Use 50mm Celotex Tuff-R GA3000Z between rafters instead of 100mm.
• Use 60mm Celotex Tuff-R GA3000Z fixed underneath raftersinstead of 40mm - overlap joints and tape.
• Fix 25 x 50mm Treated Batten through Celotex to rafters.
• Fix 12.5mm Plasterboard to batten.
Dwarf Wall - required to meet U-Value of 0.30 W/m2K
• Install timber stud using 38 x 89mm fin. CLS Profile or
47 x 100mm Framemate.
• Infill with 75mm Celotex GA3000Z insulation or similar
to achieve required U-Value.
• Finish with 12.5mm Vapour Check Plasterboard.
Flat Ceiling - required to meet a U-Value of 0.16 W/m2K
• Install 47 x 100mm (or size required) Sawn & Treated
Joistmate as ceiling joist.
• Fix 12.5mm Vapour Check Plasterboard to joists.
• Lay 100mm roll insulation in between ceiling joists and 170mm
layered over crossways (dependant on joist size).
Pitched Roof - Cold Roof ConstructionFor extensions, refurbishment or change of use etc, the requirement to meet
Part L1B is a U-value of 0.16 W/m2K. One method of achieving this if the loft
space is not to be habitable is to lay rolled insulation between and over the
joists to a total of 270mm thick.
If 100mm joists - 100mm roll layed between joists,
170mm layed crossways over
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
Part ‘L1B’ 2006Examples to meet Part L1B in existing dwellings
05
Build
ing
Regu
latio
ns P
artL
& L1
B 2006
Available from ChampionCode Description
844ØTR 2400 x 1200 x 40mm Celotex Tuff-R GA3000Z
845ØTR 2400 x 1200 x 50mm Celotex Tuff-R GA3000Z
846ØTR 2400 x 1200 x 60mm Celotex Tuff-R GA3000Z
8475TR 2400 x 1200 x 75mm Celotex Tuff-R GA3000Z
841ØØTR 2400 x 1200 x 100mm Celotex XR3000
Other sizes available - see page 08
21396748 Celotex Insulation Clip
2Ø193Ø65 75mm S/A Aluminium Foil Tape
6312SEP 1800 x 900 x 12.5mm S/E Plasterboard
6312DP 1800 x 900 x 12.5mm S/E Vapour Check Plasterboard
(both above also in 2400 x 1200mm)
1ØØRB 100mm thick 4.8m x 1200mm (5.76m2) split 3/400mm Rockwool Roll Batt
15ØTP3 150mm thick 3.2m x 1200mm (3.84m2) split 3/400mm Rockwool Roll Batt
1ØØCGLR14 100mm thick 3 Rolls 11.96m x 387mm (13.89m2) Crown Glass Fibre
17ØCGCR8 170mm thick 3 Rolls 7.03m x 380mm (8.01m2) Crown Glass Fibre
255ØSCT 25 x 50mm Sawn Treated Batten
471ØØSC 47 x 100mm Framemate Dry Graded to C16 Softwood Stud
5Ø1ØØCLS 38 x 89mm fin. C16 Softwood Planed 4 Eased Edges CLS Profile Stud
50mm Air Space betweenrafters for ventilation
100mm Celotex XR3000 betweenrafters, fixed using InsulationClips or fix 25 x 50mmTreated Battenas stops to rafters
40mm Celotex Tuff-RGA3000Z fixedunderneath to rafters - overlap joints
Use Foil Tape for facejoints on 40mm Celotex
Fix 12.5mm Plasterboardthrough Celotex to stud
FREEDelivery overa wide area.
FREEDelivery overa wide area.
FREEDelivery overa wide area.
FREEDelivery over a wide area.
Fix 12.5mm Plasterboardthrough Celotex to rafters
47mm x 100mmFrameMate as studdingat 600mm centres or38 x 89mm fin. CLS ProfileTimber Stud
Infilled with75mm CelotexTuff-R GA3000Z
Ventilated loft space
Sarking felt
Eaves ventilator to ensure25mm air gap
Minimise cold bridging
Soffit vents
Plasterboard
100mm Roll layedbetween (100mm)ceiling joists, then170mm roll layedover cr0ssways
Code Description
1ØØRB 100mm thick 4.8m x 1200mm (5.76m2) Split 3/400mm Rockwool Roll Batt
15ØTP3 150mm thick 3.2m x 1200mm (3.84m2) Split 3/400mm Rockwool Roll Batt
1ØØCGLR14 100mm thick 3 Rolls 11.96m x 387mm (13.89m2) Crown Glass Fibre
17ØCGCR8 170mm thick 3 Rolls 7.03m x 380mm (8.01m2) Crown Glass Fibre
Treated JoistMate for ceiling joists and rafters
Fixings
Plasterboard
Part ‘L1B’ 2006Examples to meet Part L1B in existing dwellings
06 www.championtimber.com
Flat Roof on an extension - Warm Roof constructionThe ideal solution here is to fit an all-in-one roofboard such as Kingspan TR31
Thermaroof or Celotex Tempchek TD3000. Both incorporate a 6mm WBP exterior
plywood bonded one side to rigid polyisocyanurate foam, faced with low
emissivity aluminium foil on the reverse as a vapour check liner. This creates a
'Warm Roof' and avoids the difficulty of providing ventilation through the roof
void.
In combination with weathering, joist cavity and 12.5mm Vapour Check
Plasterboard when -
Refurbishing an existing extension flat roof
• 96mm Thermaroof TR31 meets the 0.25 W/m2K U-Value requirement
For flat roofs on a new extension
• 115mm Tempchek TD3115 meets the 0.20 W/m2K U-Valuerequirement
Refurbishment - upgrading an exterior wallExterior walls are required to meet 0.35 W/m2K U-value. This can be achieved
on existing older properties by lining the interior of the exterior wall. Illustration
above right shows an example of upgrading a typical brick/cavity/brick
construction. For other types of exterior wall construction, the thickness and
combination of insulation materials used may vary. For further information,
we have access to technical advise if required.
Refurbishment - upgrading an exterior wallThis combination meets 0.35 W/m2K U-value requirement
New and replacement Windows and DoorsNew and replacement windows and doors are also required to meet Part L and in
particular minimum standards of glazing apply. Champion are main stockists of
Premdor Joinery Products. As an aid to meet the regulations, Premdor’s very
comprehensive catalogue available from Champion, details alongside the relevant
product the U-value achieved.
In summary the regulations state for:
Insulation angle fillet
3 Layer built-up felt roofingutilising 3G felt base layerpartially bonded
3G baselayer
KingspanThermaroof TR31or CelotexTempchekTD3000
12.5mm Vapour CheckPlasterboard
Unventilated cavity(Low emissivity)
Foil vapourcontrol layerto underside
Vapour proof non-setting gungrade mastic sealant appliedcontinuously to upper surface of all joists /noggins correspondingwith board edges to provide continuity of foil vapour control layer
Joistmate
Available from ChampionCode Description
8496CP 2400 x 1200 x 96mm Thermaroof TR31 Roofdeck
84115TR 2400 x 1200 x 115mm Tempchek TD3115 Roofdeck
Treated JoistMate roof joists
Timber Firrings
5ØAR 50mm Tilting Fillet
Joist Hangers
21347764 Buildex RG151 Coated Fixings for 96mm Deckboard
21383045 Buildex RG177 Coated Fixings for 115mm Tempchek
8412DP 2400 x 1200 x 12.5mm Vapour Check Plasterboard
22946782 Non-setting mastic eg Dow Corning 791 Weatherseal Black
Existing exterior wall
102mm Brick
50mm Cavity 13mm Plaster 47mm x 100mm FrameMate Timber Stud or 38mm x 89mm CLS Profile Timber Stud at 600mm centres
40mm Vapour CheckThermal Laminate
100mm Rockwool Rollor 100mm Glassfibre
Available from ChampionCode Description
1ØØRB 100mm thick 4.8m x 1200mm (5.76m2) Split 3/400mm Rockwool Roll Batt
1ØØCGLR14 100mm thick 3 Rolls 11.96m x 387mm (13.89m2) Crown Glass Fibre
844ØVCTL 2400 x 1200 x 40mm Vapour Check Thermal Laminate
471ØØSC 47 x 100mm Framemate Dry Graded to C16 Softwood Stud
501ØØCLS 38 x 89mm fin. C16 Softwood Planed 4 Eased Edges CLS Profile StudFixings
Drywall Screws up to 75mm long
WindowsBoth new and replacement mustmeet a U-value of 2.00 W/m2K whenfully glazed. If glazing is separate,this must be a minimum hard coatLow E double glazing with anemissivity of 0.15 and a 16mm airgap between panes. To be sure of compliance, it is recommended that readyfactory glazed windows are used.
DoorsWooden and PVC-U doors arerequired to meet 2.00 U-value. WhilstAluminium must meet 2.20 U-value.The same applies to minimumstandards of glazing as windowsabove. For replacement situations,wooden doors only need complywhere over 50% of the combined doorand door frame area is glazed.Contact us if assistance is required.
InsulationInsulation Products
07
Insu
latio
n Pr
oduc
ts
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
ROCKWOOLManufactured from molten volcanic rock, Rockwool is:
• fire resistant• water repellent
• chemically inert
• rot and vermin proof
• lightweight, easy to use and maintenance free
• retains its thickness
• ideal for uses requiringthermal insulation and sound absorption
• all Rockwool products are CE/CPDcompliant as ‘fit for purpose’
ROCKWOOL ROLL
Lightweight insulation mats in a roll. Suitable as insulation for:
• roof spaces in domestic, commercial and industrial buildings
• underfloor
• suspended ceilings, also improving acoustic performance
ROCKWOOL - FLEXI SLABA semi rigid slab with a unique flexible edge, simply squeeze and fit with
ease, a perfect fit every time.
• tight fit - no gaps• excellent thermal and
acoustic properties
• dimensions to suit timberand metal studding
• no sagging or slumping - continuous performance
• ideal for loft conversions, partitioning and party walls
• CE/CPD compliant as ‘fit for purpose’
ROCKWOOL RWA45 SEMI RIGID SLABSLightweight semi-rigid slabs, being denser and more thermally efficient,thickness for thickness than the roll material.
• use for thermal insulation of floors,walls and roofs
• easy to cut with a sharp knife
• size makes it ideal for fitting between rafters(at 600mm centres) on a pitched roof
ROCKWOOL CAVITY WALL BATTSInstalled in the cavity during build up of the wall.
• completely reliable, maintenance free and cost effective
• size designed to correspond to the vertical spacing of the wall tietherefore no additional fixings required
GLASS FIBRE INSULATION ROLLSManufactured from glass fibre bonded with a synthetic resin:
• classed as non-combustible, achieving Class 1 Surface Spread of Flame
• rot and vermin proof
• lightweight, easy to use and maintenance free
• ideal for thermal insulation of roofs, walls and suspended floors
• because of its fire resistance and sound absorption qualities, used for suspended ceilings and lining internal partitioning
• CE/CPD compliant as ‘fit for purpose’
Code Trade Pack R Value (m2K/W)
5ØRWFS 1200 x 600 x 50mm thick (pack of 12) = 8.64m2 1.32
1ØØRWFS 1200 x 600 x 100mm thick (pack of 6) = 4.32m2 2.63
Code Trade Pack R Value (m2K/W)
1ØØCGLR14 100mm thick, 3 rolls 11.96m x 387mm = 13.89m2 2.27
15ØCGLR9 150mm thick, 3 rolls 8.04m x 387mm = 9.34m2 3.41
17ØCGCR8 170mm thick, 3 rolls 7.03m x 380mm = 8.01m2 3.86
2ØØFG 200mm thick, 3 rolls 5.2m x 386mm = 6.02m2 4.54
Code Trade Pack (perforated for cutting to 400mm) R Value (m2K/W)
1ØØRB 100mm thick, roll 4.8m x 1200mm = 5.76m2 2.27
15ØTP3 150mm thick, roll 3.2m x 1200mm = 3.84m2 3.41
Code Trade Pack R Value (m2K/W)
RWA45 50mm thick, 8 slabs 1000 x 600mm = 4.80m2 1.43
RWA451ØØ 100mm thick, 4 slabs 1000 x 600mm = 2.40m2 2.86
Insulation ProductsSee over on pages 8 and 9 for more insulation products…
Code Trade Pack R Value (m2K/W)
5ØCWB 50mm thick, 12 Batts 1200 x 455mm = 6.55m2 1.35
65CWB 65mm thick, 10 Batts 1200 x 455mm = 5.46m2 1.75
8ØCWB 80mm thick, 8 Batts 1200 x 455mm = 4.36m2 2.22
Brick outer layer
Rockwool Cavity Wall Batt
100mm concrete block inner leaf
13mm plaster or 12.5mm plasterboard on dabs
InsulationInsulation Products
08 www.championtimber.com
CELOTEX tuff-R ZERO GA3000Z, Therma-Break and Extra-R XR3000A multi-purpose insulation board made up of rigid polyisocyanurate (PIR)modified polyurethane foam blended with hydrocarbon blowing agentsyielding a board with zero Ozone Depletion Potential. The foam is facedwith reflective foil both sides as a vapour barrier.
• easily cut with a knife or saw
• lightweight adding no load to the structure
• has nearly twice the thermal efficiency compared to normal insulation,therefore space saving
• stable, strong, durable and rot proof
• achieves Class 1 Surface Spread of Flame
• manufacturing process complies with legislation to reduce Global Warming
• CE/CPD compliant as ‘fit for purpose’
Applications include:
• loft conversions
• pitched roof in betweenand under rafters
• lining of timber frameand masonry walls
• floor insulation
Celotex and Kingspan thicknesses are nominal.
SELF ADHESIVE ALUMINIUM FOIL TAPEFor covering butt joints on Celotex, Tri-Iso, Superquilt and Framefoil
CELOTEX INSULATION CLIPDesigned for quick installation ofCelotex insulation between timberjoists or rafters. Ensures the insulation is held firmlywithout the need for nails, screws orbattens.
KINGSPAN THERMAPITCH TP10 ZERO OFPRafter level insulation for tiled or slated pitched ‘Warm Roof’ spaces.Made from high performance CFC/HCFC-free rigid urethane foam, faced bothsides with low emissivity composite foil facings
Thermapitch TP10 zero OFP is:
• easily cut with a knife or saw
• lightweight adding no load to thestructure
• highly resistant to the transmissionof water vapour
• stable, strong, durable and rot proof
• achieves Class 1 Surface Spread ofFlame
• manufacturing process complieswith legislationto reduce Global Warming
• CE/CPD compliant as ‘fit for purpose’
• ideal for loft conversions
Code Description R Value (m2K/W)
Therma-Break
8412TR 2400 x 1200 x 12mm 0.50
842ØTR 2400 x 1200 x 20mm 0.85
8425TR 2400 x 1200 x 25mm 1.05
843ØTR 2400 x 1200 x 30mm 1.30Tuff-R Zero
8435TR 2400 x 1200 x 35mm 1.50
844ØTR 2400 x 1200 x 40mm 1.70
8445TR 2400 x 1200 x 45mm 1.95
845ØTR 2400 x 1200 x 50mm 2.15
8455TR 2400 x 1200 x 55mm 2.35
846ØTR 2400 x 1200 x 60mm 2.60
8465TR 2400 x 1200 x 65mm 2.80
847ØTR 2400 x 1200 x 70mm 3.00
8475TR 2400 x 1200 x 75mm 3.25
848ØTR 2400 x 1200 x 80mm 3.45
849ØTR 2400 x 1200 x 90mm 3.90XR3000
841ØØTR 2400 x 1200 x 100mm 4.30
8411ØTR 2400 x 1200 x 110mm 4.75
8412ØTR 2400 x 1200 x 120mm 5.20
8413ØTR 2400 x 1200 x 130mm 5.65
8414ØTR 2400 x 1200 x 140mm 6.05
8415ØTR 2400 x 1200 x 150mm 6.50
Code Description R Value (m2K/W)
845ØTP1Ø 2400 x 1200 x 50mm 2.15
846ØTP1Ø 2400 x 1200 x 60mm 2.60
847ØTP1Ø 2400 x 1200 x 70mm 3.00
849ØTP1Ø 2400 x 1200 x 90mm 3.90
841ØØTP1Ø 2400 x 1200 x 100mm 4.30
Code Description
2Ø127848 50mm wide x 45m long
2Ø193Ø65 75mm wide x 45m long
2Ø134693 100mm wide x 45m long
Code Description
21396748 Celotex Insulation Clip
FREEDelivery overa wide area.
FREEDelivery overa wide area.
FREEDelivery overa wide area.
FREEDelivery over a wide area.
ACTIS TRI-ISO SUPER 10
Tri-Iso Super 10 is a lightweight multi-composite insulation made up of 19 alternating layers of closed cell foam and reflective films, yet it is only30mm thick.
• thermal efficiency equivalent to210mm thick (U-Value 0.19 W/m2K)mineral wall insulation asindependently certified by BM TRADA
• ensures the continuous insulation,weather and air-tightness of roofsand ridges
• minimises thermal bridging aroundroof windows
• no need for a vapour barrier
• space saving element particularly lends itself to loft conversions
• quick to install using a staple gun
• durable and tear resistant yet cuts easily with scissors
• no irritant dust or fibres when cutting and installing
• CE/CPD compliant as 'fit for purpose'
SUPERQUILTA thin multi-layer insulation quilt similar to Tri-Iso. Independent tests show Superquilt provides insulation performance equivalentto 270mm thickness of glass wool, yet its only 25mm thick. Used on roofs.Space saving qualities makes it ideal for loft conversions.
• meets 2006 updated Part L1B UK Building Regulations
• for new build and refurbishment
• fast and easy to install using a staple gun
• lightweight and flexible
• durable and tear resistant yet cuts with scissors
SUPERQUILT UNDER RAFTER APPLICATIONSuperQuilt is fast and simple to install. With great benefits, keeping rafterdepths to a minimum, lightweight and high insulation values.
THINSULEXAcross-rafter multi-foil insulation for new build, extensions, conversion andrefurbishment work, etc.
EXPANDED POLYSTYRENE STANDARD GRADE (EPS70)A traditional, cheap and easy to use form of insulation with manyapplications such as:
• thermal insulation for floors, internal walls, pitched roofstank linings etc., also packing materials
• retains its thermal characteristics indefinitely
• manufactured using environmentally friendly methods - HCFC free
• BBA Certified
InsulationInsulation Products
09
Insu
latio
n Pr
oduc
ts
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
Code Description R Value (m2K/W)
3ØTIS1Ø1Ø 30mm thick, 1.60m x 6.25m = 10m2 roll 5.25
Code Description R Value (m2K/W)
25SQ1Ø 25mm thick, 1.5m x 10m = 15m2 roll 6.1
Acoustic Insulation Products -See pages 11 - 14
Code Description
30T10 30mm thick 10m x 1.2m Roll (12m2) Thinsulex
Insulation
Code Description R Value (m2K/W)
25POLY 2400 x 1200 x 25mm 0.66
4ØPOLY 2400 x 1200 x 40mm 1.05
5ØPOLY 2400 x 1200 x 50mm 1.31
75POLY 2400 x 1200 x 75mm 1.97
1ØØPOLY 2400 x 1200 x 100mm 2.62
Require HIAB delivery to site?
- ring our New Malden Sales Team on 020 8949 1621
InsulationInsulation Products
10 www.championtimber.com
KINGSPAN THERMAROOF TR31 (or equivalent) FOR ROOFINGA complete flat roof deck with insulation and built in vapour check laidover joists to create a 'Warm Roof' construction. Thermaroof comprises polyurethane foam, bonded on 1 face with W.B.P 6.5mm plywood. The other face is bonded with aluminium foil vapourcheck liner, which has a class 1 Surface Spread of Flame Rating(B.S. 476: Pt 7: 1971). Bed joints in non-setting mastic such as Dow Corning 791, to form a vapour barrier.
• lightweight, easy to handle
• the 'all-in-one' roof board that will take 3 layer felt orone layer weatherings
• foam is resistant to mould, microbial growth and vermin
For flat roofs, in combination with weathering, joist cavity and 12.5mm
vapourcheck plasterboard:
• 76mm Thermaroof meets the 0.35 W/m2K U-value requirementfor pre April 2002 Building Regulations
• 96mm Thermaroof meets the 0.25 W/m2K U-value requirementfor April 2002 regulations and updated Part L1B April 2006 - refurbishment of existing extensions.
THREE LAYER FELT APPLICATIONPerforated first layer is laid loose, second layer is then heat-laid on top,
spot bonding the bottom layer. Top layer is also heat-laid using hot Bitumen.
CELOTEX TEMPCHEK TD3115 - FOR FLAT ROOFSA combined roof deck an insulation board for flat roofs supported by timberjoists such as JoistMate.
Creates a warm roof construction eliminating the need to insulate between thejoists. Board comprises of 6mm WBP exterior plywood bonded one side to rigidpolyisocyanurate foam, faced with low emissivity aluminium foil on the reverseas a vapour check liner.
• lightweight - easy to handle• quick to lay• plywood face suitable for a wide variety of weathering systems• avoids the difficulty of providing ventilation through
the roof void• CE/CPD compliant as ‘fit for purpose’
For flat roofs, in combination with weathering, 115mm Tempchek, 150mmjoist cavity and 12.5mm Vapour Check Plasterboard, achieves a U-value of0.19 W/m2K, meeting the 0.20 W/m2K requirement for new flat roof extensionsset down in Part L1B of the 2006 Building Regulations.
FIXINGS FOR THERMAROOF & TEMPCHEKCode Description
21345562 Buildex RG126 Coated Fixing for 76mm Thermaroof
21347764 Buildex RG151 Coated Fixing for 96mm Thermaroof
21383045 Buildex RG177 Coated Fixing for 115mm Tempchek
Code Description R Value (m2K/W)
84115TR 2400 x 1200 x 115mm 4.788
Code Description
847ØCP 2400 x 1200 x 76mm
8496CP 2400 x 1200 x 96mm
Joistmate
Top layer is also heat-laidusing hot bitumen
12.5mm Vapour Check Plasterboardor other ceiling covering Firring Piece
THERMAROOF laid withply facing upFREE
Delivery overa wide area.
FREEDelivery overa wide area.
FREEDelivery overa wide area.
FREEDelivery over a wide area.
Part ‘E’ Building RegulationsResistance to the Passage of Sound
11
Part
‘E’
Build
ing
Regu
latio
ns
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
To combat the problem of noise pollution in buildings, Approved DocumentPart 'E' of the Building Regulations sets out to introduce more robust buildingstandards to improve soundproofing in both new build and refurbishmentprojects by
• improving acoustics and therefore sound privacy between dwellings
• improve the sound reduction of internal walls and floors in a home
• improve the sound reduction between rooms and in common areas eg. residential homes, hotels etc.
• to take into consideration low frequency sounds eg TV's, stereos etc. considered to be the main offender in noise pollution complaints
There are two types of sound considered
• Airborne Sound, relates to sound made by speech, TV's, stereos etc. The measurement term used for on-site testing is DnTw or Rw if laboratory tested and is measured in Decibels (dB). The higher the figure, the better the insulation
• Impact Sound, relates to sounds such as footsteps or heavy objects impacting on the floor. The measurement terms used here is LnTw for on-site testing and Lnw for laboratory. This is also measured in Decibels. However, the lower the figure the better the insulation against impact noise
CTR ADJUSTING FACTORIn addition on some building elements, Part E requires a correction factor to beadded to the Airborne Sound value, designed to take into account low frequencynoises such as from TV's stereos etc. The Ctr factor is set by Building Controland will vary according to the type of building.
PRE-COMPLETION TESTING (PCT)Building structures are now subject to Pre-Completion Testing. The onus is onthe builder to demonstrate the required levels of sound insulation have beenachieved. Testing is done under the jurisdiction of the local Building Controldepartment and is a cost to the builder.
If a failure occurs then the construction has to be improved, then re-tested,again at the builders cost.
To ensure the building does not fail, particularly with refurbishment orupgrading of an existing building where every building can be unique,attendance to good design, good quality workmanship and attention to detail is critical.
There are exceptions where PCT is not required, amongst these are
• where a building conforms to Robust Standard Detail (RSD)document (see further on for more detail)
• internal walls/partitioning within a dwelling ie. a wall between abedroom or room containing a W.C. or/and other rooms
ROBUST STANDARD DETAIL (RSD) DOCUMENTThe House Builders Federation has set up a programme of testing buildingmethods and materials used for walls and floors in new build construction, to meet and exceed the sound requirements of the regulations. As a consequence these methods etc. have subsequently been approved by Building Control and are known as Robust Standard Detail (RSD) constructions.New build structures that are built to comply with RSD's standards, negate theneed for Pre-Completion Testing.
Building Element Airborne Sound Transmission Impact Sound Transmission (minimum values) (maximum values)
Internal Wall or Partition (Pre-completion testing not required)
40 Rw dB
Wall separating one dwelling from another (Pre-completion testing required)
New Build 45 DnTw + Ctr dB
Material change of use / refurbishment 43 DnTw + Ctr dB
Separating timber floor (Pre-completion testing required)
New Build 45 DnTw + Ctr dB 62 LnTw dB
Material change of use / refurbishment 43 DnTw + Ctr dB 64 LnTw dB
TABLE OUTLINING THE REQUIREMENTS TO MEET PART 'E'(correct at time of going to press, please check with Building Control for current)
ROCKWOOL FLEXI SLABA semi-rigid slab with a unique flexible edge, simply squeeze and fit with
ease, a perfect fit every time
• tight fit - no gaps
• excellent thermal and acoustic properties
• dimensions to suit timber and metal studding
• no sagging or slumping - continuous performance
• ideal for loft conversions, partitioning and party walls
• CE/CPD compliant as 'fit for purpose'
TIMBER STUD WALL FORMED BY MATERIALCHANGE OF USE• 47 x 75mm FrameMate Stud at
600mm centres
• 50mm Flexi-Slab installed betweenstuds
• fix 12.5mm Soundshield Plasterboardboth sides of stud
Achieves sound reduction of Rw 40dB -Part ‘E’ minimum requirementDouble layer of 12.5mm SoundshieldPlasterboard achieves Rw 46dB
Code Description ‘R’ value (m2K/W)
50RWFS 1200 x 600 x 50mm thick (pack of 12) = 8.64m2 1.32
100RWFS 1200 x 600 x 100mm thick (pack of 6) = 4.32m2 2.63
Acoustic Insulation Products
For Soundshield Plasterboard see page 16
As the Correction Factor (Ctr) to meet Part E will vary dependant on the typeof building, this will require different solutions re materials and buildingmethods. To show all of these variations is beyond the scope of thisbrochure and therefore we recommend manufacturers literature (available onrequest) or their technical departments are consulted.
REDUC ACOUSTIC FLOOR INSULATIONA range of floor insulation products designed to meet the needs of Building Regulations 'Part E'
All Reduc products are CPD compliant as 'fit for purpose'
REDUC MICRO 17A thin acoustic overlay panel, ideal for first level floors and above.Substrate layers of moisture resistant fibreboard and MDF top are separatedby visco-elastic sound dampening strips, whilst the underside incorporates aresilient layer of acoustic felt, which provides mechanical isolation from theexisting floor.
• dampens vibration and reduces airborne sound and impact noise
• easy to install either on top of existing wood or chipboard flooringor even concrete floors. Micro 17 is not load bearing
• only 17mm thick therefore minimal height loss
• moisture resistant MDF face takes most floor coverings
On existing timber floors where requirement is to satisfy Building RegulationPart 'E' as part of an overall upgrade, install SoundSlab insulation between thetimber joists. When installed as illustration below achieves Aiborne Sound of43dB (DnTw+Ctr) and Impact Sound 58dB (LnTw).
REDUC STRATA 35Strata is a high performance acoustic overlay (not structural) flooring for newand existing timber and concrete floors.
Top layers of moisture resistant fibreboard and MDF are separated by visco-elastic sound dampening strips, whilst the underside incorporates a resilientlayer of acoustic felt, which provides mechanical isolation from the existingfloor. This produces a board with an overall thickness of 35mm.
• dampens vibration and reduces airborne sound and impact noise
• easy to install either on top of existing wood or chipboard flooring or even concrete floors
• top surface takes most standard floor coverings
On existing timber floors where requirement is to satisfy Building RegulationPart 'E' as part of an overall upgrade, install SoundSlab insulation between thetimber joists. When installed as illustration above right achieves Aiborne Soundof 45dB (DnTw+Ctr) and Impact Sound 57dB (LnTw).
REDUC STRATA 35 EXTRAAn even higher performance version of Reduc Strata and as such does notalways require the installation of SoundSlab between joists on timber floorsto meet Part 'E'.
Structure and thickness of board is the same except dense cement particleboard is used instead of chipboard. When installed as illustration belowachieves Aiborne Sound of 48dB (DnTw+Ctr) and Impact Sound 57dB (LnTw).
REDUC FOUNDATION 35A high performance structural or overlay acoustic flooring for use on new andexisting timber and concrete floors.
The 35mm thick board comprises of two layers of moisture resistant chipboard,separated by visco-elastic sound dampening strips, then an acoustic felt on theunderside.
• dampens vibration and reduces airborne sound and impact noise
• installed on top of timber joists (maximum 450mm centres) as a structural floor, or can be used as an overlay
• moisture resistant chipboard surface takes most standard floorcoverings
When installed as illustration below achieves Aiborne Sound of 47dB(DnTw+Ctr) and Impact Sound 57dB (LnTw).
Acoustic InsulationAcoustic Insulation Products
12 www.championtimber.com
SoundBreaker Bars
2 Layers Plasterboard
2 Layers Plasterboard
Reduc Isolation Tape
Reduc Acoustic Sealant
Reduc Micro 17
18mm Chipboard
SoundSlab
SoundBreaker Bars
SoundBreaker Bars
2 Layers Plasterboard
Reduc Isolation Tape
Reduc Acoustic Sealant
Reduc Strata
18mm Chipboard
SoundSlab
SoundBreaker Bars
2 Layers Plasterboard
Reduc Isolation Tape
Reduc Acoustic Sealant
Reduc Strata Extra
18mm Chipboard
SoundSlab
SoundBreaker Bars
2 Layers Plasterboard
Reduc Isolation Tape
Reduc Acoustic Sealant
Reduc Foundation 35 or 39
SoundSlab
Insulation ProductsSee over on pages 14 and 15 for moreacoustic insulation products…
Deck 18
Acoustic InsulationAcoustic Insulation Products
13
Acou
stic
Insu
latio
n Pr
oduc
ts
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
Code Description
4217RM 1175 x 575 x 17mm Micro 17, (pack of 4)
4235RS 1175 x 575 x 35mm Strata 35, sold loose
4235RSE 1175 x 575 x 35mm Strata 35 Extra, sold loose
8135RF 2400 x 600 x 35mm Foundation 35, sold looseReduc Accessories
21329166 1200 x 600 x 100mm SoundSlab, (pack of 6) = 4.32m2
21383182 1200 x 600 x 75mm SoundSlab (pack of 8) = 5.76m2
21397042 1200 x 600 x 50mm SoundSlab (pack of 12) = 8.64m2
21356162 19 x 5mm Micro 17 Isolation Tape, 15m roll
21396274 37 x 5mm Strata Isolation Tape, 15m roll
21353031 37 x 5mm Strata Extra Isolation Tape, 15m roll
21385957 37 x 5mm Foundation Isolation Tape, 15m roll
21345487 Reduc Joint Adhesive, 1 litre bottle
21353444 1200mm wide Reduc Wire Mesh, 50m roll
21353970 Reduc Flexiseal 380ml Tube
Tri-Deck
Acoustic Strip
Ask for a Monarfloor leaflet
MONARFLOOR ACOUSTIC FLOOR INSULATIONA range of acoustic floor insulation products to meet the airborne and impactsound requirements of Building Regulations Approved Document Part 'E'.
Monarfloor uses LRAC reconstituted foam bonded to various sub-stratesdepending on the requirement. This foam is stable and has a lower natural frequency than other foams for reducing sound. CE/CPD compliant as 'Fit for purpose'
Versions available
MONARFLOOR DECK 9Designed to reduce sound transmission through concrete or existing timberfloors in situations where a minimum increase in finished floor height isrequired.
Consists of 8mm LRAC foam bonded to 9mm MR MDF. Overall thickness 17mm.
• Airborne Sound Reduction (DnTw+Ctr) - 48dB• Impact Sound Reduction (LnTw) - 48dB
MONARFLOOR DECK 18
Designed to reduce sound transmissionthrough existing timber floors in situations where an increase in finishedfloor height is not critical.
Consists of 8mm LRAC foam bonded to18mm P5 V313 MR Chipboard. Overallthickness 26mm.
When installed as part of a soundreduction system as right, achieves:• Airborne Sound (DnTw+Ctr) - 49dB • Impact Sound (LnTw) - 49dB
MONARFLOOR DECK 22
A thicker version of Deck 18 using 22mm thick P5 V313 MR Chipboardinstead of 18mm For heavy domestic applications.
When installed as Deck 18 above achieves:• Airborne Sound Reduction (DnTw+Ctr) - 50dB• Impact Sound Reduction (LnTw) - 50dB
MONARFLOOR TRI-DECK Designed to reduce sound transmission through existing applications. Installed as a sub-floor directly onto floor joists.Consists of 5mm foam rubber bonded to 8mmLRC foam bonded to 22mm P5 V313 MR Chipboard. Overallthickness 35mm.
When installed as part of a soundreduction system as right, achieves• Airborne Sound (DnTw+Ctr) - 46dB• Impact Sound (LnTw) - 56dB
MONARFLOOR ACOUSTIC STRIP Designed to reduce sound transmission through timber floors in new andrefurbishment projects. Fitted onto the top of the floor joist, then 22mmP5 V313 MR Chipboard Flooring glue fixed over.
Consists of 15mm LRAC foam bonded to asecuring membrane, reinforced with aplywood backing. Overall thickness21mm.
When installed as part of a soundreduction system as right, achieves• Airborne Sound (DnTw+Ctr) - 48dB• Impact Sound (LnTw) - 48dB
MONARFLOOR IMPACT MAT Used underneath carpet etc on concrete floors to reduce impact sound
Consists of a 6.5mm thick resilient rubber crumb with a syntheticreinforced top surface. Achieves 29dB (Lw).
Code Description
4217MFAD 1200 x 600 x 17mm Monarfloor Acoustic Deck 9
8226MFAD 2400 x 600 x 26mm Monarfloor Acoustic Deck 18
823ØMFAD 2400 x 600 x 30mm Monarfloor Acoustic Deck 22
21338649 2400 x 600 x 35mm Monarfloor Tri-Deck
MFAS45 2400 x 21 x 45mm Monarfloor 45 Acoustic Strip
MFAS75 2400 x 21 x 75mm Monarfloor 75 Acoustic Strip
MFIM11 11m x 1.37m x 6.5mm Roll Monarfloor Impact Mat
MONARFLOOR ACCESSORIES
MFFB1Ø 150 x 6mm x 2m Pack Monarfloor Flanking Band
MFFB75 75 x 6mm x 2m Pack Monarfloor Flanking Band
MFA5 Monarfloor Adhesive – 5ltr
MFA1 Monarfloor Adhesive – 1ltr
Ask for a Monarfloor leaflet
ACOUSTILAY ACOUSTIC FLOOR INSULATIONInstalled like a conventional underlay it provides an easy and convenientmethod of upgrading existing floors in building conversions required to meetthe airborne and impact sound requirements of Building Regulation ApprovedDocument Part 'E'.
Acoustilay is constructed with a resilient foam core bonded either one or bothsides dependant on type, with a flexible attenuating surface layer.There are three versions:
Acoustilay 15 - used where both airborne and impact noise insulation isrequired. Flexible layer two sides. Overall 15mm thick.Acoustilay 8 - impact noise insulation similar to Acoustilay 15, but airbornenoise reduction will depend on the existing floor structure. Flexible layer oneside. Overall 12mm thick.Acoustilay 3 - used where only impact insulation is required. Flexible layer oneside. Overall 10mm thick.
• improves airborne sound insulation• reduces impact noise• flexible, easily cut and shaped• offers economy of quick and easy installation, simply laid
under the carpet• minimum increase in floor level• tested to BS2750• flame retardant, surface layer self extinguishing• CE/CPD compliant as 'fit for purpose'
Code Description
4415AU 1200 x 1200 x 15mm Acoustilay 15
448AU 1200 x 1200 x 12mm Acoustilay 8
443AU 1200 x 1200 x 10mm Acoustilay 3
ACOUSTILAY ACCESSORIESPerimeter Strips - used with carpet gripper and installed around the perimeter
nailed to the floor.
Foam Perimeter Sealer - for sealing the gap between a timber/laminate flooring
overlay. Self adhesive, 3mm thick expanding over 24 hours up to a 15mm gap.
Release Tackifier Adhesive - permanently tacky acrylic adhesive for laying
Acoustilay to sub-floor and carpet tiles.
Acrylic Adhesive - high tack, good grab, permanent bond. For bonding carpet
and timber to Acoustilay.
Acoustilay MDF - special T & G V313 Moisture Resistant MDF used as an
interlayer minimising joint movement, carpet rucking etc.
Code Description
12ØØAPS15 25 x 9mm thick Acoustilay 15 Perimeter Strip, 1.2m long
12ØØAPS8 25 x 6mm thick Acoustilay 8 Perimeter Strip, 1.2m long
21351549 15 x 3 to 15mm thick Foam Perimeter Sealer, 8m roll
21357Ø84 Release Tackifier Adhesive, 10ltr
213654Ø9 Acrylic Adhesive, 5ltr
446AUMR 1200 x 1200 x 6mm Acoustilay TG4 MR MDF Acoustic Underlay
ATTENU8 ACOUSTIC UNDERLAY - FOR REFURBISHMENTThis underlay is designed to improve the airborne and impact sound
insulation of an existing wood or concrete floor and can be laid under carpet
or laminate flooring etc.
The high-density sound barrier assists in blocking airborne noise, whilst the
foam resilient layer assists in absorbing impact noise. Attenu8 underlay is
hardwearing and gives excellent under foot touch. The increase in floor height
is minimal, particularly when substituting for the underlay under an existing
carpet.
Code Description
44A8U15 1200 x 1200 x 13mm Attenu8 Underlay
21371134 75 x 5mm 15m S/A Flanking Strip
Other Attenu8 Acoustic Flooring products for new build as part ofa flooring system
Code Description
82A8Ø 2400 x 600 x 26mm Attenu8 Overlay - for concrete floors
5Ø75B7Ø 45 x 70mm fin. 1.8m Attenu8 Timber Batten - for wood
and concrete floors
Airborne Sound Insulation of Timber Floors
The Building Regulations require a figure forDnTw + Ctr of 43dB or higher for airborne noisebetween dwellings within a converted property.The higher the figure the better the insulation.
Impact Sound Insulation of Timber Floors
The Building Regulations require a figure for LnTw
of 64dB or lower for impact noise between dwellingswithin a converted property. The lower the figurethe better the insulation against impact noise.
Acoustic InsulationAcoustic Insulation Products
14 www.championtimber.com
The Perimeter Strip nailed to the floor, with thefoam edge seal compressed to the skirting andgripper nailed on top.
Plywood, MDF or timber laid onto Acoustilay withPerimeter Sealer or flexible mastic to the edge.
DnTw DnTW+ctr
Acoustilay 15 55dB 48dB
Acoustilay 8 50dB 43dB
LnTW
Acoustilay 15 37dB
Acoustilay 8 39dB
Acoustilay 3 39dB
Carpet or laminated flooring etc.Existing timber floor, lifted to put in theRockwool, re laid and all gaps caulked Attenu8 Underlay
(No guarantees can be given to the acoustic performance of this system as every existing situation varies)
15
Fire
Rat
ed,W
ater
& F
ire R
esis
tant
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
Sheet MaterialFire Rated, Water & Fire Resistant
Fire Rated Sheet MaterialPYROK 5 STAR, VIROC (Class ‘O’) OR SIMILARA cement bonded particle board.
• suitable for internal and external use• asbestos free, no hazardous volatiles, non-aggressive dust• cut, plane, drill, router or screw into it
Code Description
846PROC 2440 x 1220 x 6mm
426TB 1218 x 618 x 6mm moisture resistant
MASTERBOARDConsists of a high calcium silicate matrix reinforced with cellulose, which isthen high pressure steam cured.
• high dimensional and chemical stability, with low alkalinity• rated as Class ‘0’ and Class ‘1’ Surface Spread of Flame• provides up to 30 min. of fire protection• immune to insect and vermin attack• smooth 1 face, lightly textured reverse• asbestos free
Code Description
846MB 2440 x 1220 x 6mm
849MB 2440 x 1220 x 9mm
8412MB 2440 x 1220 x 12mm
SUPALUXA high performance building board made from calcium silicate reinforcedwith selected fibres and fillers.
• rigid, strong yet lightweight• non-combustible, providing up to 4 hours fire protection• moisture tolerant, will not rot or decay• smooth face can be decorated• easy to handle and work• asbestos free
Code Description
846SL 2440 x 1220 x 6mm
849SL 2440 x 1220 x 9mm
8412SL 2440 x 1220 x 12mm
MDF FR EURO CLASS C (Formerly Class 1)
Code Description
846MDFFR1 2440 x 1220 x 6mm
849MDFFR1 2440 x 1220 x 9mm
8412MDFFR1 2440 x 1220 x 12mm
8418MDFFR1 2440 x 1220 x 18mm
MDF FR EURO CLASS B (Formerly Class O)
Code Description
8412MDFFRO 2440 x 1220 x 12mm
8418MDFFRO 2440 x 1220 x 18mm
WBP HARDWOOD PLYWOOD FR EURO CLASS C (Formerly Class 1)
Code Description
844FEPFR1 2440 x 1220 x 4mm
846FEPFR1 2440 x 1220 x 6mm
849FEPFR1 2440 x 1220 x 9mm
8412FEPFR1 2440 x 1220 x 12mm
8418FEPFR1 2440 x 1220 x 18mm
WBP HARDWOOD PLYWOOD FR EURO CLASS B (Formerly Class O)
Code Description
8412FEPFRO 2440 x 1220 x 12mm
8418FEPFRO 2440 x 1220 x 18mm
Water and Fire ResistantSheet MaterialHARDIBACKERMade from Portland cement and ground sand with cellulose additives, thisboard is particularly resistant to water and as such is used in bathrooms,kitchens and utility rooms. Ideal as a backing board for tiling etc. Generally Hardibacker 250 is used forfloor and worktop applications, whilst Hardibacker 500 is used for walls,although the latter can also be used for floors and worktops.
• highly recommended where high levels of moisture exist• non-combustible, conforms to Class ‘O’ Surface Spread of Flame• vermin and rot proof• strong and durable, yet light and easy to work with (wear mask)• bonding coat on surface assists tiling• meets ISO 8226• British Board of Agreement (BBA) approved• 10 year product warranty• asbestos and formaldehyde free• suitable for internal and external use
Code Description
536HB 1500 x 900 x 6mm Hardibacker 250
4312HB 1200 x 800 x 12mm Hardibacker 500
2346Ø973 Alkaline Resistant Joint Tape - 20m roll
Superior Water andMould ResistanceProprietary cement formula withMoldblock™ Protection providessuperior mould resistance.
16 www.championtimber.com
Sheet MaterialPlasterboard & Accessories
PLASTERBOARDA wallboard consisting of aerated gypsum encased in a strong durable paperliner.
• used for partitioning, internal wall and ceiling linings• Ivory face suitable for both plastering and direct decoration• because of its unique behaviour when subject to high temperatures,
classified Class ‘O’ Spread of Flame in England and Wales• all Plasterboard products are CE/CPD compliant as ‘fit for purpose’
SQUARE EDGE
TAPERED EDGETapered edge version, used when ‘Dry Lining’ a wall or partition. Once thecorrect joint treatment has been completed , provides a flat seamless surface,without the need for plastering.
FOIL BACKED VAPOUR CHECKA tough, scuff resistant metallised polyester film on one face of theplasterboard provides the dual features of vapour check and reflectivethermal insulation.
Available in square or tapered edge. Used to line ceilings, external walls and loftconversions etc.
PLASTERBOARD PLANKA thicker version of the standard plasterboard, used for its sounddeadening qualities.
SOUNDSHIELD PLASTERBOARDThe high density of this board helps absorb sound energy
• designed for use where sound reduction is particularly important• classified as Class ‘0’ Surface Spread of Flame• complies with BS1230 Part 1, designated as Type 1• CE/CPD compliant as ‘fit for purpose’
PLASTERBOARD ACCESSORIES
THERMAL LAMINATE AND VAPOUR CHECKConsists of 12.5mm plasterboard backed with a thick layer of extrudedpolystyrene, to form a versatile board with high thermal insulation value.
The vapour check version has the added bonus of a water resistant membraneincorporated between the polystyrene and the plasterboard. Cream face is fordecorating or plastering.
• ideal for lining the inside of external walls, particularly when upgrading walls with low insulation value
• Vapour Check version important where there is a risk of damp
Code Description ‘R’ Value
(m2K/W)
8422TLPB 2400 x 1200 x 22mm Tapered Edge 0.39
843ØTLPB 2400 x 1200 x 30mm Tapered Edge 0.60
843ØVCTL 2400 x 1200 x 30mm Tapered Edge Vapour Check 0.60
844ØVCTL 2400 x 1200 x 40mm Tapered Edge Vapour Check 0.86
THERMAL LAMINATE PLUSAs Thermal Laminate but 12.5mm plasterboard bonded to CFC-free extruded
polystyrene producing a board with lower thermal conductivity.
• allows thinner thicknesses to be used compared to standard
• extruded polystyrene provides natural vapour barrier
Code Description Weighted Density ‘R’ value(Kg/m2) (m2K/W)
639SEP 1800 x 900 x 9.5mm 6.20 0.06
6312SEP 1800 x 900 x 12.5mm 8.30 0.08
849SEP 2400 x 1200 x 9.5mm 6.20 0.06
8412SEP 2400 x 1200 x 12.5mm 8.30 0.08
8415SEP 2400 x 1200 x 15mm 10.20 0.09
Other sizes available to order.
Code Description Weighted Density ‘R’ value
(Kg/m2) (m2K/W)
639DP 1800 x 900 x 9.5mm Square Edge 6.20 0.06
6312DP 1800 x 900 x 12.5mm Square Edge 8.30 0.07
8412DP 2400 x 1200 x 12.5mm Tapered Edge 8.30 0.07
Other sizes available to order.
Code Description Weighted Density ‘R’ value
(Kg/m2) (m2K/W)
8219TEP 2400 x 600 x 19mm Tapered Edge 13.49 0.12
Code Description Weighted Density ‘R’ value
(Kg/m2) (m2K/W)8413SSPB 2400 x 1200 x 12.5mm Square Edge 11.50 0.05
8415SSPB 2400 x 1200 x 15mm Square Edge 13.80 0.06
Code Description5Ø12RIS 50 x 12 x 5mm Resilient Isolation Strip Roll
2525STA 25 x 25 x 3.6mm Speedline Steel Angle SL06
3ØSRB 3m Speedline Resilient Bar RB565
Code Description Weighted Density ‘R’ value
(Kg/m2) (m2K/W)
8412TEP 2400 x 1200 x 12.5 mm 8.30 0.08
Other sizes available to order.
IMPORTANT - The ivory face of Plasterboardis suitable for direct decoration or plastering.
Code Description ‘R’ Value
(m2K/W)
8427TLPPB 2400 x 1200 x 27mm Tapered Edge 0.71
8435TLPPB 2400 x 1200 x 35mm Tapered Edge 1.00
844ØTLPPB 2400 x 1200 x 40mm Tapered Edge 1.19
45THBP 2400 x 1200 x 45mm Tapered Edge 1.37
8455TLPPB 2400 x 1200 x 55mm Tapered Edge 1.75
17
Plas
terb
oard
& A
cces
sorie
s
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
PHENOLIC LAMINATE WITH VAPOUR CHECKUses CFC and HCFC-free phenolic foam bonded to 12.5mm plasterboard
incorporating a vapour check.
MOISTURE RESISTANT BOARD (MOISTURE SHIELD)Suitable for applications where temporary exposure to moisture may occur.
• suitable for use in bathrooms, kitchens, garages etc• can be used as a baseboard for ceramic tiling
Knauf recommends that Knauf Moistureshield boards should be sealed prior toplastering. (See manufacturers recommendation before plastering).
FIRECHECK BOARD (FIRESHIELD)Offers a greater fire protection than standard Wallboard.
• meets BS1230 Part 1, Type 5
Code Description Weighted Density ‘R’ value
(Kg/m2) (m2K/W)
8412FCP 2400 x 1200 x 12.5mm Square Edge 9.00 0.05
8415FCP 2400 x 1200 x 15mm Square Edge 10.7 0.06
Other sizes, tapered edge and vapour check versions also available.Prices on application. Other technical details also on application.
JOINT CEMENTThe ideal quick drying filler for square edge or tapered edge boards. Can also beused to fill nail or screw holes and any other indents.
Code Description
JC12 Readymix 12 Litre Tub
DRYWALL SCREWSPlated self-tapping screws for fixing plasterboard to either timber or metal stud.Boxed screws code
1000's 2000's Size
23778948 23729582 3.5 x 25mm
23727557 23764378 3.5 x 32mm
23776173 23745797 3.5 x 38mm
23724785 23737822 3.5 x 42mm
23722Ø19 n/a 3.5 x 45mm
2377Ø621 23769915 3.5 x 50mm
500's 200's
23792852 n/a 3.5 x 55mm
2374Ø792 23721302 3.5 x 60mm
23765Ø85 23725140 4.2 x 65mm
n/a 23784457 4.2 x 75mm
COVEA gypsum core encased in a durable paper liner. Used as a cornice for theangle between walls and ceilings. The face is ready for direct decoration.Accurate 90˚ mitres can be cut using templates for internal or external corners.
Code Description
100C 90mm x 3m
127C 127mm x 3m
COVE ADHESIVEFor fixing cove and as a filler for gaps between cove and wall or ceiling, mitres,nail holes etc. One bag is normally sufficient to fix 9 lengths of 90mm or 5lengths of 127mm cove
Code Description
CA 5kg bags
BONDING COMPOUNDAn economical adhesive for fixing metal furring channel when bondingplasterboard together to form laminated partition. Also suitable for all ThermalBoard.
Code Description
BC 25kg bags
Approx. requirement per 100M2 M/F channel 140-190Kg
FIBRE JOINTING TAPE (SELF ADHESIVE)
Covers over joints between boards and when used with jointing compound,
dramatically reducing cracking at joints. Can also be used for internal corners.
Code Description
FT Self adhesive 50mm x 90m Roll
PLASTER/PLASTERBOARD BEADS
Code Description
22Ø42941 MMB Plaster Mini-Mesh Bead - 2.4m long
22094339 PAB 24 Plaster Angle Bead - 2.4m long
22045713 PCB 24 Plasterboard Thin Coat Bead - 2.4m long
Code Description ‘R’ Value
(m2K/W)
845ØPLPB 2400 x 1200 x 50mm Tapered Edge 1.82
846ØPLPB 2400 x 1200 x 60mm Tapered Edge 2.36
8465PLPB 2400 x 1200 x 65mm Tapered Edge 2.58
Other sizes available to order.
Code Description Weighted Density ‘R’ value
(Kg/m2) (m2K/W)
8412MRTEP 2400 x 1200 x 12.5mm Tapered Edge 10.00 0.05
Sheet MaterialPlasterboard & Accessories
18 www.championtimber.com
ChipboardSTANDARD GRADE TYPE P2
Minimum 600 density interior use only.• sizes marked 'CE' are CE/CPD compliant as 'fit for purpose'
Code Description
8412C 2440 x 1220 x 12mm 'CE'
8418C 2440 x 1220 x 18mm 'CE'
8425C 2440 x 1220 x 25mm 'CE'
843ØC 2440 x 1220 x 30mm
1Ø418C 3050 x 1220 x 18mm
1Ø425C 3050 x 1220 x 25mm
FLOORING GRADE T&G TYPE P5MOISTURE RESISTANT (V313)
Tongued and grooved all four edges. Minimum 700 .
Moisture resistant for use in areas of high humidity
and where risk of moisture. Not for external use.
• ideal for kitchens, bathrooms and
extensions
• CE/CPD compliant as
'fit for purpose'
• FSC min 50%
Code Description
8218MRTGC 2400 x 600 x 18mm
8222MRTGC 2400 x 600 x 22mm
Oriented Strand Board(OSB)CONDITIONED GRADE OSB3A general purpose board suitable for exterior use composed of timberwafers/strands of variable species and bonded under pressure withwaterproof resin.
Made up in 3 layers, cross oriented to give maximum strength.
• approved by the British Board of Agreement (BBA)
• specified for flat roofs,
flooring and wall sheathing
• felt manufacturer's guarantee
dependent on being BBA
approved
• cheaper alternative to Ply
• CE/CPD compliant as
'fit for purpose'
• FSC min 70%
Code Description
84110SB 2440 x 1220 x 11mm
84180SB 2440 x 1220 x 18mm
BlockboardFAR EASTERN/BRAZILIAN 5 PLY5 Ply long grain, interior use, face veneers are always hardwood.
• face veneers can be stained, painted or varnished
Code Description
8418RB 2440 x 1220 x 18mm
Door BlanksGeneral construction is of a thick solid timber core with a face veneer flusheither side. Veneer is generally suitable for painting. Door blanks forinternal use only are generally chipboard core.
• ‘Lite’ door blanks are about 20% lighter than standard• Decorative Veneer versions also available• Blanks can be trimmed to size and glazing apertures added
(glazing aperture will have size limitations if used as a fire door)• Used where an oversized door is required, or to fit a non-standard
openingWhere used as a fire resistant door, generally
• 45mm thick blanks achieve 30 minute fire rating• 54mm thick blanks achieve 60 minute fire rating
To meet fire rating, whether used full size or trimmed to fit, blanks are requiredto be lipped both long edges and on 60 minute, short edges as well.Intumescent Strip/Smoke Seal is also required, either fitted underneath or onthe lipping, or to the door frame itself.
‘LITE’ INTERNAL/EXTERNAL (30min)Code Description
26FUNSL 1981 x 762 x 45mm
29FUNSL 2058 x 838 x 45mm
3ØFUNSL 2135 x 915 x 45mm
4ØFUXL 2440 x 1220 x 45mm ‘Superlite’
VENEERED INTERNAL (30min)Code Description3ØFUNS 2135 x 915 x 45mm Sapele
3ØFUNA 2135 x 915 x 45mm Ash
3ØFUNOQ 2135 x 915 x 45mm Quarter Cut Oak
INTERNAL/EXTERNAL (60min)Code Description3ØFUXD 2135 x 915 x 54mm
Sheet MaterialChipboard, OSB, Blockboard & Blanks
FREEDelivery over a wide area.
PlywoodWBP HARDWOOD PLYWOODLong grain, hardwood veneers throughout.
• for interior or exterior use • WBP gluing highly resistant to weather, micro-organisms
and wet and dry heat• hard wearing and very durable
Code Description
844WBPP 2440 x 1220 x 3.6mm
846WBPP 2440 x 1220 x 5.5mm
849WBPP 2440 x 1220 x 9mm
8412WBPP 2440 x 1220 x 12mm
8415WBPP 2440 x 1220 x 15mm
8418WBPP 2440 x 1220 x 18mm
8425WBPP 2440 x 1220 x 25mm
1Ø54WBPP 3050 x 1525 x 3.6/4mm
1Ø56WBPP 3050 x 1525 x 5.5/6mm
1Ø59WBPP 3050 x 1525 x 9mm
1Ø512WBPP 3050 x 1525 x 12mm
1Ø518WBPP 3050 x 1525 x 18mm
1Ø525WBPP 3050 x 1525 x 25mm
BIRCH WBP Although WBP gluing, Birch ply is made up of veneers which are officially
classified as perishable. Not recommended for any exposed exterior
application unless pressure preservative impregnated.
Russian/Latvian
Code Description
55BP 1525 x 1525 x 1.5mm
844BP 1220 x 2440 x 4mm
846BP 1220 x 2440 x 6mm
849BP 1220 x 2440 x 9mm
8412BP 1220 x 2440 x 12mm
8418BP 1220 x 2440 x 18mm
8424BP 1220 x 2440 x 24mm
FLEXIBLE PLYWOOD - MOISTURE RESISTANT GLUING• flexibility allows quick and easy creation of intricate curves and
circular shapes
• used in furniture making, exhibition work, shopfitting, columns and
framework etc
Code Description
845FPL 2440 x 1220 x 5mm - Long Grain
845FPC 1220 x 2440 x 5mm - Cross Grain
848FPL 2440 x 1220 x 8mm - Long Grain
848FPC 1220 x 2440 x 8mm - Cross Grain
BBA APPROVED CONSTRUCTION PLY WBP - CE2+ EN636-2Metsa Spruce or similar softwood ply construction
• British Board of Agrement (BBA) approved for load bearing applications
• conforms to EN636-2, for use in roofing, flooring andwall sheathing
• CE/CPD compliant as ‘fit for purpose’• PEFC min 70%
Code Description
849BBA 2440 x 1220 x 9mm
8412BBA 2440 x 1220 x 12mm
8418BBA 2440 x 1220 x 18mm
8424BBA 2440 x 1220 x 24mm
SHUTTERING PLY CE4 EN13986 - WBP GLUEElliottis Pine or similar softwood ply
• general purpose use• not suitable for permanent outdoor applications
Code Description
8418SP 2440 x 1220 x 18mm
T & G PLYWOOD FLOORING - CE2+ EN636-2Finnish Spruce, tongued and grooved all 4 edges
• internal use, WBP gluing• graded 111/111 both faces• BBA Approved for load bearing• CE/CPD compliant as ‘fit for purpose’• PEFC min 70%
Code Description
8218TG4P 2400 x 600 x 18mm
MARINE HARDWOOD PLYWOODWBP glueing, long grain, selected durable hardwood veneers throughout.
• suitable for marine, external and internal uses • conforms to BS1088
Code Description
844MP 2440 x 1220 x 4mm
846MP 2440 x 1220 x 6mm
849MP 2440 x 1220 x 9mm
8412MP 2440 x 1220 x 12mm
8418MP 2440 x 1220 x 18mm
8425MP 2440 x 1220 x 25mm
19All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
Sheet MaterialPlywood
For Flexible Veneer - see page 26
Notes on Glue/Bond TypesWBP: This Glue/Bond type is highly resistant to weather, micro-organisms, cold and boiling water and wet and dry heat. The lifespan of these boards are also subject to the durability ofspecies of veneer used, for example, Hardwood Far Eastern Plywill be more durable than Birch Veneered Ply.
Exterior: This Glue/Bond type conforms to American and Canadiangradings, glues are classed as being 100% waterproof. Again, thedurability of veneer must be taken into consideration, Americanand Canadian Plywoods are coniferous (softwood) species.
Chip
boar
d,O
SB,B
lock
boar
d,Bl
anks
& P
lyw
ood
20 www.championtimber.com
MDF Medium Density FibreboardManufactured from wood fibres, dry-bonded with synthetic resins thencompressed at high frequency.
• uniform, strong, compact and stable• smooth both faces and uniform in thickness• can be cut and profiled, lipping not normally required• can be screwed, glued or dowelled etc• no grain or splintering problems• used heavily in the furniture industry• ideal for making bespoke furniture, doors and units
It is recommended that a suitable face mask is worn when cutting ormachining, and all faces and edges are sealed with MDF sealer.
STANDARD For Interior Use OnlyCode Description
842MDF 2440 x 1220 x 2/2.5mm
843MDF 2440 x 1220 x 3mm
844MDF 2440 x 1220 x 4mm
846MDF 2440 x 1220 x 6mm – Minimum 50% FSC
849MDF 2440 x 1220 x 9mm – Minimum 50% FSC
8412MDF 2440 x 1220 x 12mm – Minimum 50% FSC
8415MDF 2440 x 1220 x 15mm – Minimum 50% FSC
8418MDF 2440 x 1220 x 18mm – Minimum 50% FSC
8422MDF 2440 x 1220 x 22mm
8425MDF 2440 x 1220 x 25mm – Minimum 50% FSC
843ØMDF 2440 x 1220 x 30mm
8438MDF 2440 x 1220 x 38mm
8445MDF 2440 x 1220 x 45mm
8512MDF 2440 x 1525 x 12mm
8518MDF 2440 x 1525 x 18mm
1Ø46MDF 3050 x 1220 x 6mm
1Ø49MDF 3050 x 1220 x 9mm
1Ø412MDF 3050 x 1220 x 12mm
1Ø415MDF 3050 x 1220 x 15mm
1Ø418MDF 3050 x 1220 x 18mm
1Ø425MDF 3050 x 1220 x 25mm
1Ø430MDF 3050 x 1220 x 30mm
1Ø512MDF 3050 x 1525 x 12mm
1Ø518MDF 3050 x 1525 x 18mm
1Ø525MDF 3050 x 1525 x 25mm
LIGHT MDFA specially engineered MDF ideal where high quality coupled with lowweight is required.
• 20% lighter than standard MDF
Code Description
843ØLIGHT 2440 x 1220 x 30mm
1Ø418LIGHT 3050 x 1220 x 18mm
V313 (Moisture Resistant) MDFFor use in areas of high humidity such as kitchens and bathrooms.
Code Description
846MRMDF 2440 x 1220 x 6mm
849MRMDF 2440 x 1220 x 9mm
8412MRMDF 2440 x 1220 x 12mm
8415MRMDF 2440 x 1220 x 15mm
8418MRMDF 2440 x 1220 x 18mm – Minimum 50% FSC
8425MRMDF 2440 x 1220 x 25mm
8430MRMDF 2440 x 1220 x 30mm
10418MRMDF 3050 x 1220 x 18mm
MEDEX (EXTERIOR) MDFA fully exterior MDF, as long as finishing instructions are adhered to
(copies on request).
Code Description
8412XMDF 2440 x 1220 x 12mm
8418XMDF 2440 x 1220 x 18mm
8425XMDF 2440 x 1220 x 25mm
ZF ECOLOGIQUE MDFZero added formaldehyde for use in environmentally sensitive situations such as
museums, hospitals, schools etc.
Code Description
8412ZFMDF 2440 x 1220 x 12mm
8418ZFMDF 2440 x 1220 x 18mm
BEAD AND BUTT MDF V313 (Moisture Resistant)Grooved at 100mm centres. For covering walls and ceilings etc, and because it’s
moisture resistant is particularly suitable
in kitchens and bathrooms
(not shower or bath area).
Code Description
849MRMDFBB 1220 x 2440 x 9mm - cross groove
849MRMDFBBLG 2440 x 1220 x 9mm - long groove
FLEXIBLE MDF• create shapes, go round bends, very versatile
• uses include shopfitting, contoured wall features, bar fronts, columns,
kitchen, bedroom and office furniture
• very cost effective
Code Description
Short Grain (Bend 1220mm Width)
846MDFFS 1220 x 2440 x 6mm
Long Grain (Bend 2440mm Width)
846MDFFL 2440 x 1220 x 6mm
Sheet MaterialMDF
All MDF should be sealedwhen used in enclosed areas
Bead & Butt MDF Flexible MDF
21
MDF
,Han
di-P
anel
s & H
ardb
oard
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
Pre-Cut Handi-PanelsCUT TO SIZEWBP HARDWOOD PLYWOODCode Description
2Ø774370 1220* x 610* x 3.6/4mm
20777159 2440 x 610 x 3.6/4mm
20734084 1220 x 1220* x 3.6/4mm
2Ø742409 1220* x 610* x 5.5/6mm
2Ø796563 2440 x 610* x 5.5/6mm
2Ø753498 1220 x 1220* x 5.5/6mm
2Ø761813 1220* x 610* x 9mm
2Ø794651 2440 x 610* x 9mm
2Ø7729Ø1 1220 x 1220* x 9mm
2Ø781224 1220* x 610* x 12mm
2Ø735388 2440 x 610* x 12mm
2Ø792312 1220 x 1220* x 12mm
2Ø743703 1220* x 610* x 18mm
2Ø795085 1220 x 1220* x 18mm
2Ø72234Ø 2440 x 610* x 18mm
MDF MEDIUM DENSITY FIBREBOARDCode Description
2Ø734Ø6Ø 1220 x 610* x 6mm
2Ø76588Ø 1220 x 1220* x 6mm
2Ø738181 2440 x 610* x 6mm
2Ø72ØØ49 1220 x 610* x 9mm
2Ø77143Ø 1220 x 1220* x 9mm
2Ø722814 2440 x 610* x 9mm
2Ø7742Ø2 1220 x 610* x 12mm
2Ø776978 1220 x 1220* x 12mm
2Ø725366 2440 x 610* x 12mm
482418MDF 1220 x 610* x 18mm
484818MDF 1220 x 1220* x 18mm
961218MDF 2440 x 305* x 18mm
961818MDF 2440 x 458* x 18mm
962418MDF 2440 x 610* x 18mm
963Ø18MDF 2440 x 762* x 18mm
Dimensions marked * are nominal
HardboardSTANDARDA dense, highly compressed wood fibre sheet material, very smooth on one sidewith a mesh pattern on the reverse.
Code Description
84H 2440 x 1220 x 3.2mm
42H 1220 x 610 x 3.2mm
846H 2440 x 1220 x 6.0mm
OIL TEMPERED• denser and stronger than standard hardboard• greater resistance to moisture• uses include farm buildings, signs, packaging etc
Code Description
84HT 2440 x 1220 x 3.2mm
PERFORATED/PEGBOARDWith regular holes.
Code Description
84HP 2440 x 1220 x 3.2mm
846HP 2440 x 1220 x 6mm
IVORY INSULATION BOARDLow density fibre board faced one side with cream paper, which can be painted.Interior use only.
Code Description
8412I 2440 x 1220 x 12.7mm
PINBOARDA medium density board (not to be confused with MDF) ideal for notice boardsand train set bases.
Code Description
849P 2440 x 1220 x 8/9mm
SUNDEALA ‘K’ BOARDA medium density board (not to be confused with MDF) ideal for notice boardsand train set bases.
Code Description
846SUN 2440 x 1220 x 6mm
849SUN 2440 x 1220 x 9mm
8412SUN 2440 x 1220 x 12mm
Floor Protection BoardPROTECTOR BOARDA low priced plain black board for protecting floors whilst wet trades etc are on site.
Code Description
842PBBP 2440 x 1230 x 2mm
Sheet MaterialHandi-Panels, Hardboard & Floor Protector
Cut to size serviceAs well as ‘off the shelf’ pre-cuthandi-panels in plywood and MDF,Champion also offer a cut-to-sizeservice on most sheet materialitems including worktops.The first two cuts are FREE per sheet.Applies to straight vertical and horizontal cuts only. For bulk or precision cutting – ask for a quote.
Screen PanelDecorative perforated patterns on either hardboard, MDF or Aluminium
• Plain can be decorated. White and veneered also available
• creates a wide range of design possibilities
• use for making dividers, screening, shutters, radiator cabinets
and shopfitting etc
HARDBOARD/MDF BORDER ON ALL 4 EDGESCode Description
231374ØØ RC403MD 1830 x 610mm Nevada Plain
2314Ø172 RC403HBWH 1830 x 610mm Nevada White
23191563 RC263HB 1830 x 610mm Colorado Plain
231971Ø7 RC183MD 1830 x 610mm Ohio Plain
23148499 RC303HB 1830 x 610mm Dakota Plain
2319988Ø RC303HBWH 1830 x 610mm Dakota White
2315126Ø RC433MD 1830 x 610mm Oregon Plain
23154Ø49 RC433HBWH 1830 x 610mm Oregon White
23148215 RC323HB 1830 x 610mm Filigree Plain
2312Ø129 RC333MD 1830 x 610mm Fleur De Lys Plain
VENEERED 2 SIDES - BORDER 2 LONG EDGES, 1 SHORTCode Description
23168Ø91 RC431VEPI 1830 x 610mm Oregon Pine Veneered
ALUMINIUM - BORDER 2 SHORT EDGESCode Description
23145733 RC247ANGE 1000 x 665mm Gold Small Clover
23124844 RC227ANGE 1000 x 665mm Gold Large Clover
23152571 RC387ANGE 1000 x 665mm Gold Oriental
2314Ø561 RC227ANSE 1000 x 665mm Silver Large Clover
23148888 RC387ANSE 1000 x 665mm Silver Oriental
23198241 RC167ANGE 1000 x 665mm Gold Maze
ALUMINIUM - NO BORDERCode Description
23135932 RC127ANGE 1000 x 665mm Gold Interwoven
23191778 RC127ANSE 1000 x 665mm Silver Interwoven
Decorative MDFTOPAN COLOURED V313 MDF
• solid colour throughout
• V313 moisture resistant
Code Description
8661ØMDFTBK 2620 x 1830 x 10mm Black
8661ØMDFTBL 2620 x 1830 x 10mm Blue
8661ØMDFTG 2620 x 1830 x 10mm Green
8661ØMDFTR 2620 x 1830 x 10mm Red
8661ØMDFTY 2620 x 1830 x 10mm Yellow
86619MDFTBK 2620 x 1830 x 19mm Black
86619MDFTBL 2620 x 1830 x 19mm Blue
86619MDFTG 2620 x 1830 x 19mm Green
86619MDFTR 2620 x 1830 x 19mm Red
86619MDFTY 2620 x 1830 x 19mm Yellow
Above subject to availability
MELAMINE 2 SIDESCode Description
8418MFMDFW 2440 x 1220 x 18mm Matt White
Pre-glued Edging for above
2Ø573Ø1Ø 22mm x 50m Roll Matt White
LACQUERED 1 SIDESCode Description
843WLMDF 2440 x 1220 x 3mm White
Decorative Sheet MaterialScreen Panel & Decorative MDF
22 www.championtimber.com
NEVADA PLAIN RC403MD MDF
DAKOTA PLAINRC303HB Hardboard
FLEUR DE LYS PLAINRC333MD MDF
OHIO PLAIN RC183MD MDF
FILIGREE PLAINRC323HB Hardboard
OREGON PLAINRC433MD MDF
SILVER INTERWOVENRC127ANSE Aluminium
SILVER ORIENTALRC387ANSE Aluminium
GOLD INTERWOVENRC127ANGE Aluminium
NO BORDER
GOLD SMALL CLOVERRC247ANGE Aluminium
COLORADO PLAIN RC263HB Hardboard
BLACK BLUE
RED YELLOW
GREEN
ASH VENEEREDCode Description
846MDFA 2440 x 1220 x 6mm - 1 side
841ØMDFA 2440 x 1220 x 10mm - 2 sides
8413MDFA 2440 x 1220 x 13mm - 2 sides
8418MDFA 2440 x 1220 x 19mm - 2 sides
1Ø418MDFA 3050 x 1220 x 19mm - 2 sides
8426MDFA 2440 x 1220 x 26mm - 2 sides
WHITE BEECH VENEEREDCode Description
846MDFBSS 2440 x 1220 x 6mm - 1 side
841ØMDFB 2440 x 1220 x 10mm - 2 sides
8413MDFB 2440 x 1220 x 13mm - 2 sides
8418MDFB 2440 x 1220 x 19mm - 2 sides
8426MDFB 2440 x 1220 x 26mm - 2 sides
STEAMED BEECH VENEEREDCode Description
841ØMDFBS 2440 x 1220 x 10mm - 2 sides
8413MDFBS 2440 x 1220 x 13mm - 2 sides
8419MDFBS 2440 x 1220 x 19mm - 2 sides
1Ø419MDFBS 3050 x 1220 x 19mm - 2 sides
8426MDFBS 2440 x 1220 x 26mm - 2 sides
CHERRY VENEEREDCode Description
846MDFC 2440 x 1220 x 6mm - 1 side
8410MDFC 2440 x 1220 x 10mm - 2 sides
8413MDFC 2440 x 1220 x 13mm - 2 sides
8418MDFC 2440 x 1220 x 19mm - 2 sides
8426MDFC 2440 x 1220 x 26mm - 2 sides
QUARTER CUT OAK VENEEREDCode Description 844MDFO 2440 x 1220 x 4mm - 1 side
846MDFO 2440 x 1220 x 6mm - 1 side
841ØMDFO 2440 x 1220 x 10mm - 2 sides
8413MDFO 2440 x 1220 x 13mm - 2 sides
8418MDFO 2440 x 1220 x 19mm - 2 sides
1Ø418MDFO 3050 x 1220 x 19mm - 2 sides
8426MDFO 2440 x 1220 x 26mm - 2 sides
CROWN CUT OAK VENEEREDCode Description
846MDFCO 2440 x 1220 x 6mm - 1 side
841ØMDFCO 2440 x 1220 x 10mm - 2 sides
8413MDFCO 2440 x 1220 x 13mm - 2 sides
8418MDFCO 2440 x 1220 x 19mm - 2 sides
8426MDFCO 2440 x 1220 x 26mm - 2 sides
PINE VENEEREDCode Description
846MDFPSS 2440 x 1200 x 6mm - 1 side
841ØMDFP 2440 x 1220 x 10mm - 2 sides
8413MDFP 2440 x 1220 x 13mm - 2 sides
8418MDFP 2440 x 1220 x 19mm - 2 sides
1Ø418MDFP 3050 x 1220 x 19mm - 2 sides
8426MDFP 2440 x 1220 x 26mm - 2 sides
MAPLE/SYCAMORE VENEEREDCode Description
846MDFM 2440 x 1220 x 6mm - 1 side
841ØMDFM 2440 x 1220 x 10mm - 2 sides
8413MDFM 2440 x 1220 x 13mm - 2 sides
8418MDFM 2440 x 1220 x 19mm - 2 sides
1Ø418MDFM 3050 x 1220 x 19mm - 2 sides
8426MDFM 2440 x 1220 x 26mm - 2 sides
CROWN CUT SAPELE VENEEREDCode Description
846MDFS 2440 x 1220 x 6mm - 1 side
841ØMDFS 2440 x 1220 x 10mm - 2 sides
8413MDFS 2440 x 1220 x 13mm - 2 sides
8418MDFS 2440 x 1220 x 19mm - 2 sides
1Ø418MDFS 3050 x 1220 x 19mm - 2 sides
8426MDFS 2440 x 1220 x 26mm - 2 sides
TEAK VENEEREDCode Description
8418MDFT 2440 x 1220 x 19mm - 2 sides
QUARTER CUT WENGE VENEEREDCode Description
8419MDFW 2440 x 1220 x 19mm - 2 sides
BLACK AMERICAN WALNUT VENEERED Code Description
846MDFWB 2440 x 1220 x 6mm - 1 side
8413MDFWB 2440 x 1220 x 13mm - 2 sides
8419MDFWB 2440 x 1220 x 19mm - 2 sides
8426MDFWB 2440 x 1220 x 26mm - 2 sides
EDGING – 50m ROLLS – REAL WOOD PRE-GLUEDCode Description
ES19A 19mm/22mm Ash
ES19B 19mm/22mm Beech
ES19BS 19mm/22mm Steamed Beech
ES19C 19mm/22mm Cherry
ES19M 19mm/22mm Sapele
ES19Ø 19mm/22mm Oak
ES3ØØ 30mm White Oak
ES19P 19mm/22mm Pine
ES19MAP 19mm/22mm Maple
ES19T 19mm/21mm Teak
ES19W 19mm/22mm Walnut
ES19WEN 19mm/22mm Wenge
30mm x 50m rolls also available in all the above veneers exceptTeak and Wenge
23
Scre
en P
anel
,Dec
orat
ive
& V
enee
red
MDF
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
Decorative Sheet MaterialVeneered MDF
Decorative Sheet MaterialWood Veneered & Melamine Faced Chipboard
24 www.championtimber.com
Wood Veneered andMelamine FacedChipboardLipped two long edgesChipboard core used is supersmooth 3 layer construction of anaverage 650mm density.
• surface finish ensures no chips are ‘grinning’ through the surface
• boards are bonded for life
• melamine used is classed as durable
• wood veneers used are ‘A’ grade, bonded to both faces
As well as this range of standardsizes, we can also have boards madeto measure and edged up to all fouredges if required. Straight cut shapesare also possible. We will be pleased to quote you.
WHITE MELAMINE FACED1830mm length 15-16mm thickness
Code Description
2Ø59154Ø 1830 x 152mm
2Ø54Ø166 1830 x 228mm
2Ø588779 1830 x 305mm
2Ø586ØØ3 1830 x 381mm
2Ø534615 1830 x 457mm
2Ø583231 1830 x 531mm
2Ø531843 1830 x 610mm
2Ø529062 1830 x 687mm
2Ø577681 1830 x 762mm
2Ø52629Ø 1830 x 915mm2440mm length 15-16mm thickness
2Ø574918 2440 x 152mm
2Ø572136 2440 x 228mm
2Ø520748 2440 x 305mm
2Ø569365 2440 x 381mm
2Ø545260 2440 x 457mm
2Ø566593 2440 x 531mm
2Ø56382Ø 2440 x 610mm
2Ø537036 2440 x 687mm
2Ø561048 2440 x 762mm
2Ø532918 2440 x 915mmMAGNOLIA MELAMINE FACED2440mm length 15-16mm thickness
Code Description
2Ø59Ø253 2440 x 152mm
2Ø538866 2440 x 228mm
2Ø536Ø91 2440 x 305mm
2Ø5847Ø2 2440 x 381mm
2Ø58193Ø 2440 x 457mm
2Ø53Ø549 2440 x 531mm
2Ø579159 2440 x 610mmGREY MELAMINE FACED2440mm length 15-16mm thickness
Code Description
2Ø527778 2440 x 152mm
2Ø524999 2440 x 228mm
2Ø573614 2440 x 305mm
2Ø522223 2440 x 381mm
2Ø57Ø835 2440 x 457mm
2Ø523213 2440 x 531mm
2Ø584146 2440 x 610mm
MAHOGANY MELAMINE FACED2440mm length 15-16mm thickness
Code Description2Ø54Ø333 2440 x 152mm
2Ø588953 2440 x 228mm
2Ø537562 2440 x 305mm
2Ø586188 2440 x 381mm
2Ø583408 2440 x 457mm
2Ø532Ø24 2440 x 531mm
2Ø58Ø636 2440 x 610mmBLACK ASH MELAMINE FACED2440mm length 15-16mm thickness
Code Description
2Ø565299 2440 x 152mm
2Ø583378 2440 x 228mm
2Ø562526 2440 x 305mm
2Ø559748 2440 x 381mm
2Ø581831 2440 x 457mm
2Ø556976 2440 x 531mm
2Ø581Ø77 2440 x 610mmLIGHT OAK MELAMINE FACED2440mm length 15-16mm thickness
Code Description
2Ø598518 2440 x 152mm
2Ø551421 2440 x 228mm
2Ø594398 2440 x 305mm
2Ø54865Ø 2440 x 381mm
2Ø545888 2440 x 457mm
2Ø594497 2440 x 531mm
2Ø543112 2440 x 610mm
STEAMED BEECH MELAMINE2440mm length 15-16mm thickness
Code Description
2Ø585525 2440 x 152mm
2Ø523275 2440 x 228mm
2Ø531591 2440 x 305mm
2Ø539917 2440 x 381mm
2Ø596842 2440 x 457mm
2Ø556556 2440 x 531mm
2Ø599218 2440 x 610mmMAPLE MELAMINE FACED2440mm length 15mm thickness
\
Code Description
2Ø58Ø933 2440 x 152mm
2Ø52252Ø 2440 x 228mm
2Ø537Ø67 2440 x 305mm
2Ø54Ø463 2440 x 381mm
2Ø53Ø679 2440 x 457mm
2Ø561178 2440 x 531mm
2Ø556921 2440 x 610mmLIMED OAK MELAMINE FACED2440mm length 15mm thickness
Code Description2Ø5499Ø9 2440 x 152mm
2Ø545659 2440 x 228mm
2Ø533Ø9Ø 2440 x 305mm
2Ø594091 2440 x 381mm
2Ø52Ø274 2440 x 457mm
2Ø598167 2440 x 531mm
2Ø534219 2440 x 610mm
Decorative Sheet MaterialWood Veneered & Melamine Faced Chipboard
25
Woo
d Ve
neer
ed &
Mel
amin
e Fa
ced
Chip
boar
d
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
BLEACHED ASH MELAMINE FACED2440mm length 15mm thickness
Code Description
2Ø556457 2440 x 152mm
2Ø532796 2440 x 228mm
2Ø564421 2440 x 305mm
2Ø549Ø84 2440 x 381mm
2Ø527488 2440 x 457mm
2Ø552442 2440 x 531mm
2Ø52Ø465 2440 x 610mmAFRICAN MAHOGANY2 SIDES WOOD VENEERED BOARD2440mm length 15-16mm thickness
Code Description
2Ø561222 2440 x 152mm
2Ø584689 2440 x 228mm
2Ø558451 2440 x 305mm
2Ø555672 2440 x 381mm
2Ø576455 2440 x 457mm
2Ø5529Ø9 2440 x 531mm
2Ø572334 2440 x 610mm
2Ø598747 2440 x 687mm
2Ø547356 2440 x 762mm
2Ø595975 2440 x 915mmOAK 2 SIDESWOOD VENEERED BOARD2440mm length 15-16mm thickness
Code Description
2Ø544584 2440 x 152mm
2Ø541811 2440 x 228mm
2Ø59042Ø 2440 x 305mm
2Ø539Ø3Ø 2440 x 381mm
2Ø587659 2440 x 457mm
2Ø584887 2440 x 531mm
2Ø533496 2440 x 610mm
Iron-on Edging StripCode Description
2Ø575267 19mm White Melamine IE811 10m roll
2Ø5211Ø3 19mm Mahogany Melamine IE813 10m roll
2Ø538767 19mm Light Oak Melamine 10m roll
2Ø595876 19mm Beech Melamine 10m roll
2Ø523879 19mm Magnolia Melamine IE815 10m roll
2Ø530082 19mm Maple Melamine 10m roll
2Ø597511 19mm Pearwood Melamine 10m roll
2Ø574451 19mm Stilo Walnut Melamine 10m roll
2Ø562212 19mm Bleached Ash Melamine 10m roll
2Ø587239 19mm Limed Oak Melamine 10m roll
2Ø533458 19mm Pine Wood Veneer 10m roll
2Ø551797 19mm Oak Wood Veneer 10m roll
ANTIQUE PINE MELAMINE FACED2440mm length 15mm thickness
Code Description2Ø584122 2440 x 152mm
2Ø578213 2440 x 228mm
2Ø531263 2440 x 305mm
2Ø525569 2440 x 381mm
2Ø535339 2440 x 457mm
2Ø576929 2440 x 531mm
2Ø55Ø493 2440 x 610mmPEARWOOD MELAMINE FACED2440mm length 15mm thickness
Code Description
2Ø529611 2440 x 152mm
2Ø554569 2440 x 228mm
2Ø53Ø9Ø7 2440 x 305mm
2Ø578Ø46 2440 x 381mm
2Ø587Ø17 2440 x 457mm
2Ø565497 2440 x 531mm
2Ø555696 2440 x 610mmSTILO WALNUT MELAMINE FACED2440mm length 15mm thickness
Code Description
2Ø591731 2440 x 152mm
2Ø587598 2440 x 228mm
2Ø547196 2440 x 305mm
2Ø551Ø87 2440 x 381mm
2Ø53Ø2Ø4 2440 x 457mm
2Ø552381 2440 x 531mm
2Ø5315Ø8 2440 x 610mm
PINE 2 SIDESWOOD VENEERED BOARD
2440mm length 15-16mm thickness
Code Description
2Ø582111 2440 x 152mm
2Ø53Ø716 2440 x 228mm
2Ø527945 2440 x 305mm
2Ø576561 2440 x 381mm
2Ø52517Ø 2440 x 457mm
2Ø573799 2440 x 531mm
2Ø571Ø16 2440 x 610mmSHEET DECORATIVE CHIPBOARDUNLIPPED - MELAMINE 2 SIDES8415MFCW
2440 x 1220 x 15mm Matt White
Champion stock all the fixings, fittings,finishes and tools to go with timber
Decorative Sheet MaterialVeneer, Pine & Oak Panel
26 www.championtimber.com
Solid PinePanelEdge LaminatedManufactured using Scandinavian
Redwood Pine, not the cheaper less
attractive spruce. Constructed from
narrow widths of kiln dried timber
averaging around 12% moisture
content, which is then edge-glued
together achieving a very strong
board, in dimensions wider than can
be naturally grown.
• cut it, carve it, shape it…no need for edging strips
• used for making furniture, built-in wardrobes, worktops, shelving, stair treads etc
IMPORTANTTo maintain stability we recommendall surfaces and all edges aftercutting and shaping are sealed witheither the appropriate coats of paintor 2-3 coats of good qualitywaterproof polyurethane or varnish.Pine Board is not suitable forexterior use. Do not allow thisproduct to stand in a centrally heatedenvironment without having firstsealed and fixed.
17/18mm THICKCode Description
41217TLM 1.2m x 300mm
41617TLM 1.2m x 400mm
42Ø17TLM 1.2m x 500mm
42417TLM 1.2m x 600mm
61217TLM 1.8m x 300mm
61617TLM 1.8m x 400mm
62Ø17TLM 1.8m x 500mm
62417TLM 1.8m x 600mm
8917TLM 2.4m x 225mm
81217TLM 2.4m x 300mm
81617TLM 2.4m x 400mm
82Ø17TLM 2.4m x 500mm
82417TLM 2.4m x 600mm
27/28mm THICKCode Description
41227TLM 1.2m x 300mm
42427TLM 1.2m x 600mm
61227TLM 1.8m x 300mm
62427TLM 1.8m x 600mm
81227TLM 2.4m x 300mm
81627TLM 2.4m x 400mm
82Ø27TLM 2.4m x 500mm
82427TLM 2.4m x 600mm33mm THICK PINESTRINGER BLANKCode Description
151133TLM 4.47m x 270mm
28mm THICK PINE STAIR TREADBULLNOSEDCode Description
91128TLM 2.7m x 270mm
SolidEuropeanOak PanelEdge LaminatedAn Oak version of the Pine panel.
• With these panels wide widths of solid Oak are now achievable – stable, economical and a lot less work
• Solid Oak throughout – cut it, carve it, shape it… no need for edging strips
17/18mm THICKCode Description
52418LOP 1.5m x 600mm
62418LOP 1.8m x 600mm
72418LOP 2.1m x 600mm
82418LOP 2.4m x 600mm
Flexible VeneerFLEXI-VENEERGenuine grade ‘A’ wood veneer bonded to a flexible backing.
• will not crack or split like ordinary veneers• use on flat or curved surfaces• glue to substrate using PVA (preferred) adhesives,
although contact adhesives will do• will take light staining or oiling• finishes should be plasticized versions eg.
Rustins Clear Plastic Coating
Code Description
84Ø6FVA 2500 x 1240 x 0.6mm Ash - 1 side
84Ø6FVBS 2500 x 1240 x 0.6mm Steamed Beech - 1 side
84Ø6FVBW 2500 x 1240 x 0.6mm White Beech - 1 side
84Ø6FVC 2500 x 1240 x 0.6mm Cherry - 1 side
84Ø6FVM 2500 x 1240 x 0.6mm Maple - 1 side
84Ø6FVOQC 2500 x 1240 x 0.6mm Oak 1⁄4 Cut - 1 side
84Ø6FVOCC 2500 x 1240 x 0.6mm Oak Crown Cut - 1 side
84Ø6FVP 2500 x 1240 x 0.6mm Pine - 1 side
84Ø6FVSCC 2500 x 1240 x 0.6mm Sapele Crown Cut - 1 side
84Ø6FVSQC 2500 x 1240 x 0.6mm Sapele 1⁄4 Cut - 1 side
84Ø6FVWAB 2500 x 1240 x 0.6mm Walnut, American Black - 1 side
Bonded LaminatesWood VeneerIron-on self-adhesive wood veneers. Unfinished to stain or varnish.
Code Description
22366Ø78 2440 x 250mm Sapele Type Wood Veneer
22332431 2440 x 250mm Ash Type Wood Veneer
22368843 2440 x 250mm Teak Type Wood Veneer
22371621 2440 x 250mm Oak Type Wood Veneer
22362056 2440 x 250mm American Black Walnut Type Wood Veneer
Guide to Veneers For a guide to the above veneers please refer to page 23…
27
WorktopsPostform Laminated & Hardwood Worktops
All illustrations are intended as a guide only. Specifications subject to change. We have access to technical information if assistance required.
Postform WorktopsPostformed Laminated WorktopsHigh pressure laminate bonded to a high quality chipboard core.
• meets BS3794
• highly scratch resistant
• alcohol, cosmetic and household chemical resistant
• front underside edge sealed to resist water
• out performs cheaper quality worktops
• available single postformed edge (1pfe) or 2 edges postformed
(2pfe) for breakfast bars etc
40mm THICKCode Description
24634328 3000 x 600mm Polyrey Odyssey 1pfe Blanc Megeve, White
24670371 3000 x 600mm Polyrey Odyssey 1pfe Lima, Gloss
24668842 3000 x 600mm Warerite Oasis 1pfe Beech Butcher Block
24630078 3000 x 600mm Warerite Oasis 1pfe Jet
Solid Hardwood TopsManufactured using solid hardwood blocks, finger jointed, then high
frequency glued and sanded to give a uniform thickness. We offer a range
of oils and finishes suitable for use where food is being prepared.
SOLID HARDWOOD - 26/27mm THICKCode Description
246712ØØ 3050 x 750 x 26mm Iroko
24635Ø11 3050 x 750 x 26mm European Walnut
24674Ø1Ø 3050 x 750 x 26mm Prime Beech
24648976 3000 x 650 x 27mm Beech A/B Grade
24692274 3000 x 650 x 27mm Oak A/B GradeSOLID HARDWOOD - 40/42mm THICKCode Description
246336Ø4 3000 x 650 x 40mm Beech A/B Grade
24693318 3000 x 900 x 40mm Beech A/B Grade
24683173 4000 x 650 x 40mm Beech A/B Grade
24666862 2000 x 1000 x 42mm Beech Butcher Block
2462183Ø 3050 x 650 x 42mm Rustic Beech
246279ØØ 3050 x 900 x 42mm Rustic Beech
24638999 4200 x 650 x 42mm Rustic Beech
24663953 3050 x 650 x 42mm Prime Beech
24666466 3050 x 900 x 42mm Prime Beech
2464Ø299 4200 x 650 x 42mm Prime Beech
24642583 4200 x 900 x 42mm Prime Beech
24661331 3000 x 650 x 40mm Oak A/B Grade
24672429 3000 x 900 x 40mm Oak A/B Grade
2468Ø745 4000 x 650 x 40mm Oak A/B Grade
24676427 3050 x 650 x 42mm Oak
24629379 3050 x 900 x 42mm Oak
24640466 4200 x 650 x 42mm Oak
246253Ø2 3050 x 650 x 42mm Maple
24687782 3050 x 900 x 42mm Maple
2469887Ø 4200 x 650 x 42mm Maple
24642ØØ2 3050 x 650 x 42mm Iroko
2464Ø19Ø 3050 x 900 x 42mm Iroko
24649384 4200 x 900 x 42mm Iroko
246371Ø7 3050 x 650 x 42mm European Walnut
24672627 3050 x 900 x 42mm European Walnut
24621373 3000 x 650 x 40mm Wenge
24625982 3000 x 900 x 40mm Wenge
24635547 4000 x 650 x 40mm Wenge
SOLID HARDWOOD - 60mm THICKCode Description
24663366 3000 x 650 x 60mm Prime Beech
2468277Ø 3000 x 900 x 60mm Prime Beech
24627313 3000 x 650 x 60mm European Oak
24643955 3000 x 900 x 60mm European Oak
Vene
er,S
olid
Pan
el &
Wor
ktop
s
MAPLE
IROKO
OAK RUSTIC BEECH
PRIME BEECH
EUROPEAN WALNUT
Champion Timber Branches:
Delivering over a wide area
Pick up a brochure at any branchor phone free on:
0800 068 2021Download a brochure atwww.championtimber.com
Moorfield Road, Slyfield Industrial Estate, Guildford,GU1 1RU
Tel: 01483 510170Fax: 01483 510171Email: [email protected] Mon to Fri 7.30am – 5pm Sat 8am – 5pm
GUILDFORD
205 - 209 Burlington Road, New Malden,Surrey, KT3 4NB
Tel: 020 8949 1621Fax: 020 8942 9752Email: [email protected] Mon to Fri 7am – 5.30pm Sat 8am – 5pm
NEW MALDEN also HEAD OFFICE
2 Hartfield Crescent, entrance off Beulah Road,Wimbledon, SW19 3SD
Tel: 020 8542 1606Fax: 020 8540 7237Email: [email protected] Mon to Fri 8am – 5.30pm Sat 8am – 5pm
WIMBLEDON
CLAYGATE DORKING
Fircroft Way Industrial Estate,Edenbridge, Kent, TN8 6EL
Tel: 01732 864328Fax: 01732 863690Email: [email protected] Mon to Fri 8am – 5pm Sat 8am – 5pm
EDENBRIDGE
385 Leatherhead Road,Chessington, Surrey, KT9 2NQ
Tel: 01372 847910 Fax: 01372 847911Email: [email protected] Mon to Fri 8am – 5.30pm Sat 8am – 5.30pm
CHESSINGTON
272 - 274 High Street, Sutton,Surrey, SM1 1PG
Tel: 020 8642 8291Fax: 020 8770 9171Email: [email protected] Mon to Fri 7am – 5.30pm Sat 8am – 5.30pm
SUTTON
109-123 Southlands Road,Bromley, Kent, BR2 9QX
Tel: 020 8460 6655Fax: 020 8313 0583Email: [email protected] Mon to Fri 8am – 5.30pm Sat 8am – 5pm
BROMLEY
High Street, Claygate,Surrey, KT10 0JW
Tel: 01372 462407Fax: 01372 468414Email: [email protected] Mon to Fri 8am – 5.30pm Sat 8am – 5.30pm
Curtis Road, Dorking,Surrey, RH4 1EJ
Tel: 01306 884418Fax: 01306 889798Email: [email protected] Mon to Fri 7am – 5.30pm Sat 8am – 5.30pm
March 2008