Issue 10 Valid from 2010-09-01
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 3 (31)
Table of contents: Overview detectors / measuring principles ......................................................................................................................................................... 4
Monitoring units................................................................................................................................................................................................... 6
Single point unit, SPU.................................................................................................................................................................................... 6 Single point unit, G27C.................................................................................................................................................................................. 6 Multipoint unit, MPU (2, 4 or 6 channels) ...................................................................................................................................................... 7 Multi channel units, (12 DI or 24 DI) .............................................................................................................................................................. 8
Gas analyser, Sampling system (NDIR) for NH3, HFC or CO2.......................................................................................................................... 9
Monitoring units, others..................................................................................................................................................................................... 10
(NH3) detection of ammonia in water and brine ................................................................................................................................................ 11
(NH3) detector for ammonia, with relay output.................................................................................................................................................. 12
(NH3) detector for ammonia, for connection to monitoring unit......................................................................................................................... 13
(NH3) detector for ammonia, transmitter (4-20mA) ........................................................................................................................................... 14
(NH3) detector for ammonia, (ATEX) ................................................................................................................................................................ 15
(HFC) detector, with relay output ...................................................................................................................................................................... 16
(HFC) detector, for connection to monitoring unit ............................................................................................................................................. 17
(HFC) detector, transmitter (4-20mA) ............................................................................................................................................................... 18
(HFC) detector in ATEX-classified spaces........................................................................................................................................................ 18
(HFC) detector for room monitoring (hotels, offices etc)................................................................................................................................... 18
Exhaust gas (VOC) detector for garages, with relay output ............................................................................................................................. 19
Exhaust gas detector for (CO) and (NO2), transmitter (4-20mA / 0-10V) ......................................................................................................... 20
Flammable and explosive gas detector, with relay output ................................................................................................................................ 21
Flammable and explosive gas detector, for connection to monitoring unit ....................................................................................................... 22
Flammable and explosive gas detector, transmitter (4-20mA) ......................................................................................................................... 23
Flammable and explosive gas detector, (ATEX) .............................................................................................................................................. 23
(CO2) carbon dioxide detector, with relay output .............................................................................................................................................. 24
(CO2) carbon dioxide detector, for connection to monitoring unit ..................................................................................................................... 24
(CO2) carbon dioxide detector, transmitter (4-20mA / 0-10V)........................................................................................................................... 25
(CO2) carbon dioxide detector, Other ............................................................................................................................................................... 26
(O2) detector for oxygen.................................................................................................................................................................................... 27
(O2) detector for oxygen, (ATEX)...................................................................................................................................................................... 27
Portable detectors............................................................................................................................................................................................. 28
Auxiliary equipment........................................................................................................................................................................................... 29
Service tools ................................................................................................................................................................................................ 31
Options, Service and Commissioning............................................................................................................................................................... 31
Terms and conditions of sale............................................................................................................................................................................ 31
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 4 (31)
Overview detectors / measuring principles
Detectors for Ammonia (NH3)
Measuring principle Standard range Types Output
Semi conductive 0-10000 ppm Gx230-NH3, Gx24-NH3 Three relays
GJ-EX-NH3 Depending on monitoring unit
MP-series Depending on monitoring unit
Chemosorption CS21-NH3 4-20mA
Charge carrier inject. 30-200 ppm CI21-200 4-20mA
30-1000 ppm CI21-1000 4-20mA
30-10000 ppm CI21-10000 4-20mA
Catalytic 0-40000 ppm (4%) CC28-NH3 4-20mA
Electrochemical 0-1000 ppm EC28-NH3 4-20mA
IR absorption (NDIR) 0-25000 ppm IR-em2 (8 ch) / IR-em2 (16 ch) One (1) DO / channel. Two alarm relays and fault relay
Detectors for refrigerant as HFC (HCFC, CFC) and mixtures The HFC detector is also used for HCFC and CFC gas.
Measuring principle Standard range Types Output
Semi conductive 0-4000 ppm Gx230-HFC, Gx24-HFC Three relays
MP-series Depending on monitoring unit
0-5000 ppm RM-serie One relay
Chemosorption CS21-HFC 4-20mA
IR absorption (NDIR) 0-25000 ppm IR-em2 (8 ch) / IR-em2 (16 ch) One (1) DO / channel. Two alarm relays and fault relay
Detectors for flammable Hydrocarbon gases (HC) as propane (LPG), methane etc
Measuring principle Standard range Types Output
Semi conductive / 0-40% LEL GS230-HC, GS24-HC Three relays
GJ-EX-HC Depending on monitoring unit
MP-DS-HC Depending on monitoring unit
Chemosorption 0-50% LEL CS21-Methane 4-20mA
Catalytic 0-100% LEL TR5200-DC 4-20mA
Detectors for carbon dioxide (CO2) Measuring principle Standard range Types Output
Infrared absorption (NDIR) 0-10 000 ppm GS230-CO2, GS24-CO2, GSLT24-CO2 Three relays
0-10 000 ppm MP-D-.., MP-DS-.., MPDS-LT-CO2 Depending on monitoring unit
0-10 000 ppm TR-IR-CO2, TR-IR-CO2 LT 4-20mA / 0-10 V
0-5000, (0-30000) ppm aSense (Room mounting IP21, IP54) 4-20mA / (0-10V), relay
UG-aSense (Duct mounting) 4-20mA / (0-10V), relay
LT-aSense (Freezing rooms IP54) 4-20mA / (0-10V), relay
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 5 (31)
Overview detectors / measuring principles
Detectors for Oxygen (O2)
Measuring principle Standard range Types Output
Electrochemical 0-30% GMA36 Pro Three relays
0-25% EC 28 EX 4-20mA
Detectors for Carbon monoxide (CO) / Exhaust gas (VOC) Measuring principle Standard range Types Output
Semi-conductive (0-200 ppm) Gx230-AQS, Gx24-AQS Three relays
MP-series Depending on monitoring unit
Electrochemical 0-300 ppm TR-EC-CO 4-20 mA / 0-10 V
Detector for Nitrogen dioxide (NO2)
Measuring principle Standard range Types Output
Electrochemical 0-10 ppm TR-EC-NO2 4-20 mA / 0-10 V
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 6 (31)
Monitoring units Single point unit, SPU - SPU is a monitoring unit for one single channel (detector) - Microprocessor controlled unit with LED status indication and three alarm levels. - Alarm delay in four steps and Manual/auto alarm reset - Built-in service function and self test program. - Three alarm relays with 230 volt / 5A rated SPDT contacts. - Built-in audible alarm - Optional battery back-up - Option, on special order the unit can be delivered with pre-set alarm levels for specific gases. Remote detector option: MP-D (room mounting, IP21), MP-DS (room mounting, IP54), MP-DR (Pressure relief valves), MP-DK (duct mount), GJ-EX (ATEX classified) and detectors with 4-20 mA or 0-10 V output signal. Order code Model Description PG EURO
SPU
20-355 SPU-230 230VAC A *)
20-350 SPU-24 12-24V AC/DC A *)
60-300 Pre-set alarm levels Net 25
*) Price on request. Expected delivery from fall 2010. Single point unit, G27C - G27C is a single channel unit for DIN-rail mounting. - The unit has LED status indication for two alarm thresholds and a fault condition. - Manual/auto alarm reset. - Built-in alarm test function. - Three alarm relays with 24 volt / 1A rated SPST contacts. - Fault alarm with failsafe relay operation on loss of power. - Option, on special order the unit can be delivered with pre-set alarm levels for specific gases. Remote detector option: G(x)2.0-series and GJ-EX (ATEX classified). Order code Model Description PG EURO
G27C
20-200 G27C 12VAC/DC A 335
60-300 Pre-set alarm levels (per detector) Net 25
NEW!
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 7 (31)
Multipoint unit, MPU (2, 4 or 6 channels) - The MPU2C, MPU4C and MPU6C are monitoring units for two, four and six detectors. - Microprocessor controlled unit with independent Channel LED status indication and with three independent alarm
thresholds per channel. - Alarm delay in four steps and Manual/auto alarm reset for each channel. - Built-in service function and self test program. - Four alarm relays with 230 volt / 5A rated SPDT contacts. - Failsafe relay operation on loss of power. - Built-in audible alarm - Optional battery back-up - 24VDC/150mA output for external buzzer or flashlight. - Option, on special order the unit can be delivered with pre-set alarm levels for specific gases. 1) Remote detector option: MP-D (room mounting, IP21), MP-DS (room mounting, IP54), MP-DR (Pressure relief valves), MP-DK (duct mount), GJ-EX (ATEX classified) and detectors with 4-20 mA or 0-10 V output signal. Order code Model Description PG EURO
MPU
20-310 MPU2C 2 channels, 230VAC/24VDC NEW! A 746
20-300 MPU4C 4 channels, 230VAC/24VDC A 1019
20-305 MPU6C 6 channels, 230VAC/24VDC A 1281
60-300 Pre-set alarm levels (per detector) 1) Net 25
Factory settings: Detector type Range Alarm levels NH3 -1000 0 – 1000 ppm 150 / 300 / 500 ppm NH3 - 4000 0 – 4000 ppm 150 / 500 / 3000 ppm HFC 2) 0 – 4000 ppm 100 / 1000 / 2000 CO2 0 – 10000 ppm 2000 / 2000 / 5000ppm Flammable / explosive gas 0 – 40% LEL 5 / 10 / 20% LEL 2) Normal standard calibration is for R134a. The HFC detector is also used for HCFC and CFC.
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 8 (31)
Monitoring units Multi channel units, (12 DI or 24 DI) - LAN63-PKT and LAN63/64-PKT are monitoring units for detectors with relay outputs. - Totally eight LAN64 slaves can be connected to one LAN63 master panel, which gives 108 DI in total. - The units have LED indication and optional time delay for each digital input. - Each input can be set up as A or B-alarm. - Two alarm relays, A or B, with 24 volt / 1A rated SPDT contacts. - Failsafe relay operation on loss of power. - Manual alarm reset. Remote detector option: G(x)2.0-series and G(x)24/230-series. Order code Model Description PG EURO
LAN63-PKT
81-100 LAN63-PKT 12 DI, 230 VAC, IP32 A 478
LAN63/64-PKT
81-200 LAN63/64-PKT 24 DI, 230 VAC, IP32 A 744
81-110 LAN63 Only alarmpanel, 12 DI, 24 VAC, Master A 369
81-120 LAN64 Only alarmpanel, 12 DI, 24 VAC, Slave A 361
LAN65
Relay box for LAN63-PKT and LAN63/64-PKT
81-130 LAN65 Relay box, 12 DI, 24 VAC, A 698
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 9 (31)
Gas analyser, Sampling system (NDIR) for NH3, HFC or CO2 IR-em2, Sampling system using Infra Red absorption - Detects HCFC’s, HFC’s, Carbon dioxide (CO2) or Ammonia (NH3) - Monitors up to 16 zones - Simple 6 key user interface with password Protection - Individual zone naming and alarm thresholds - Historic data and alarm logs - Optional fail-safe alarm operation - Self diagnostics detect system faults - Highly selective to minimise nuisance alarms Order code Model Description PG EURO
IR-em2
82-112 IR-em2 (8ch) HFC Aspirated 8 Channel HCFC/HFC unit E *)
82-122 IR-em2 (16ch) HFC Aspirated 16 Channel HCFC/HFC unit E *)
82-115 IR-em2 (8ch) NH3 Aspirated 8 Channel Ammonia unit E *)
82-125 IR-em2 (16ch) NH3 Aspirated 16 Channel Ammonia unit E *)
- IR-em2 (8ch) CO2 Aspirated 16 Channel CO2 unit E *)
- IR-em2 (16ch) CO2 Aspirated 16 Channel CO2 unit E *)
Accessories - Sample tube Supplied in 100m drums in 16 colours E *)
- End of line filter E *)
- Inline Filter E *)
- 2 Way Manifold E *)
- 4 Way Manifold E *)
- VIEWPOINT “Black box” which generates HTML pages which can be viewed via a web browser. E *)
- Strobe Interface panel 24 volt output for siren/flashlight E *)
- Sample tube filter Internal air filter E *)
- Sample tube lenses E *)
- Side panel filter Dust filter for cabinet E *)
- Air pump, replacement E *)
- Relay Alarm Panel E *)
*) Price on request
NEW!
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 10 (31)
Monitoring units, others
Order code Model Description PG EURO
GMA 40 1-4 channel unit with display Designed for DIN-rail mounting Output 4-20mA (GMA41) Four relays for alarm and fault. Remote detector option: CS21, CI21 etc.
83-110 GMA 41 1 channel, 230VAC/24VDC C *)
83-111 GMA 43 3 channel, 230VAC/24VDC C *)
83-112 GMA 44 4 channel, 230VAC/24VDC C *)
Order code Model Description PG EURO
GMA 80 1-8 channel unit with display Wall mounting Output 4-20mA (GMA81) Four relays for alarm and fault. Remote detector option: CS21, CI21 etc.
83-210 GMA 81 1 channel, 230VAC C *)
83-211 GMA 83 3 channel, 230VAC C *)
83-212 GMA 84 4 channel, 230VAC C *)
83-213 GMA 88 8 channel, 230VAC C *)
*) Price on request
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 11 (31)
(NH3) detection of ammonia in water and brine
- Designed for monitoring of Ammonia in secondary cooling circuits. - Media: Water, Brine mixtures, e.g. Ethylene, Tyfoxit, Hycool etc. Order code Model Description PG EURO
MiniCal
Output, 2 x 4-20mA. Measuring range: - NH3 0,2 - 100ppm (option 0-10ppm) - NH4 0,2 - 100ppm (option 0-10ppm) Power supply: Controller 24V DC, Pump 230V AC. Pressure range 1.. 6 bars. (option up to 10 bar) Temperature range (in circuit) -30…+80oC. Stainless steel IP65
35-181 MiniCal II Open system C *)
35-180 MiniCal III Pressurised system C *)
*) Price on request
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 12 (31)
(NH3) detector for ammonia, with relay output
- Microprocessor controlled unit with built-in service mode, self-test and ”Fail-safe” function. - Three alarm levels with relays (230V / 5A) - The units can be interfaced with monitoring unit LAN63-PKT, LAN63/64-PKT or to other equipment which accepts a volt
free relay inputs - Ambient temperature: -40oC...+50oC - Humidity: 0… 95% Rh (none condensing) Order code Model Description PG EURO
GD Room mounting 160x80x60 mm IP21
37-255 GD230-NH3-1000 0-1000 ppm, 230 VAC A 518
37-257 GD230-NH3-4000 0-4000 ppm, 230 VAC A 518
37-250 GD24-NH3-1000 0-1000 ppm, 12-24 VAC/DC A 494
37-252 GD24-NH3-4000 0-4000 ppm, 12-24 VAC/DC A 494
GS Splash proof, room mounting 160x130x60mm IP54
37-455 GS230-NH3-1000 0-1000 ppm, 230 VAC A 623
37-457 GS230-NH3-4000 0-4000 ppm, 230 VAC A 623
37-450 GS24-NH3-1000 0-1000 ppm, 12-24 VAC/DC A 599
37-452 GS24-NH3-4000 0-4000 ppm, 12-24 VAC/DC A 599
GSR Splash proof, room mounting with remote sensor, 5m cable 160x130x60mm IP54
37-955 GSR230-NH3-1000 0-1000 ppm, 230 VAC A 659
37-957 GSR230-NH3-4000 0-4000 ppm, 230 VAC A 659
37-950 GSR24-NH3-1000 0-1000 ppm, 12-24 VAC/DC A 635
37-952 GSR24-NH3-4000 0-4000 ppm, 12-24 VAC/DC A 635
GK Detector for duct mounting with 1,5m cable 160x80x60 mm IP54
37-855 GK230-NH3-1000 0-1000 ppm, 230 VAC A 659
37-857 GK230-NH3-4000 0-4000 ppm, 230 VAC A 659
37-850 GK24-NH3-1000 0-1000 ppm, 12-24 VAC/DC A 635
37-852 GK24-NH3-4000 0-4000 ppm, 12-24 VAC/DC A 635
GR Detector specially designed for vent lines from pressure relief valves in refrigeration plants. Standard cable length 1,5m. 160x80x60 mm IP54
37-657 GR230-NH3-4000 0-4000 ppm, 230 VAC A 646
37-652 GR24-NH3-4000 0-4000 ppm, 12-24V AC/DC A 622
Factory settings: Detector type Range (ppm) Alarm levels (ppm) Model - 1000 0 - 1000 150 / 300 / 500 Model - 4000 0 - 4000 150 / 500 / 3000
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 13 (31)
(NH3) detector for ammonia, for connection to monitoring unit
- Power supply from monitoring unit. - Requires connection to a monitoring unit e.g. SPU, MPU2C, MPU4C, MPU6C or G27C. 1) - Ambient temperature: -40oC...+50oC - Humidity: 0…95% Rh (none condensing) Order code Model Description PG EURO
MP-D Room mounting IP21 Dimensions 80 x 82 x 56mm
38-250 MP-D-(NH3)-1000 0-1000 ppm A 314
38-252 MP-D-(NH3)-4000 0-4000 ppm A 314
MP-DS Splash proof, room mounting IP54 Dimensions 130 x 82 x 56mm
38-450 MP-DS-(NH3)-1000 0-1000 ppm A 391
38-452 MP-DS-(NH3)-4000 0-4000 ppm A 391
MP-DK Detector for duct mounting with 1,5m cable Dimensions 380 x Ø 25 mm
38-850 MP-DK-(NH3)-1000 0-1000 ppm A 391
38-852 MP-DK-(NH3)-4000 0-4000 ppm A 391
MP-DR Detector specially designed for vent lines from pressure relief valves in refrigeration plants. IP54 Dimensions 70 x 25 mm
38-652 MP-DR-NH3-4000 0-4000 ppm A 324
1) Alarm thresholds are set in the monitoring unit and it’s normally done during commissioning. Upon request the monitoring unit can be delivered with pre-set alarm levels for specific gases. The detectors must then be connected to the specified channel. Both monitoring unit and detectors will then be marked for easier installation.
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 14 (31)
(NH3) detector for ammonia, transmitter (4-20mA)
Order code Model Description PG EURO
CS21 4-20mA output Supply 10-30VDC Ambient temperature -30 oC…+50oC IP54
35-130 CS21-NH3-1000 0-1000 ppm C 612
- Remote sensor Option C 130
CI21 Detectors especially developed for harsh conditions for example marine applications with huge temperature and humidity changes. 4-20mA output. Supply 10-30VDC Ambient temperature -30…+50oC IP54
35-100 CI21-200 30-200 ppm C 685
35-110 CI21-1000 30-1000 ppm C 685
35-120 CI21-10000 30-10000 pm C 685
- Remote sensor Option C 130
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 15 (31)
(NH3) detector for ammonia, (ATEX) Order code Model Description PG EURO
EC28 ATEX classified Output 4..20 mA Supply 15-30VDC Option, LCD display
35-1401 EC28-NH3-100 0-100 ppm C 1209
35-1402 EC28-NH3-100-D 0-100 ppm, With display C 1492
35-1403 EC28-NH3-1000 0-1000 ppm C 1209
35-1404 EC28-NH3-1000-D 0-1000 ppm, With display C 1492
CC28 ATEX classified Output 4..20 mA Supply 15-30VDC Option, LCD display
35-150 CC28-NH3 0-4% C 726
GJ-EX ATEX-classified detector (zone 1 or 2) for explosive and flammable gases including Ammonia. Power supply from monitoring unit. Always connected to a monitoring unit e.g. MPU4C, MPU6C or G27C.
35-321 GJ-EX-NH3-4000 0-4000 ppm 2) C 768
35-325 GJ-EX-NH3-10000 0-10000 ppm NEW! C *)
*) Price on request. Expected delivery from fall 2010. Factory settings: Detector type Range (ppm) Alarm levels (ppm) GJ-EX 0 – 4000 150 / 500 / 3000 2) 2) Alarm thresholds are set in the monitoring unit and it’s normally done during commissioning. Upon request the monitoring unit can be delivered with pre-set alarm levels for specific gases.
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 16 (31)
(HFC) detector, with relay output
- Microprocessor controlled unit with built-in service mode, self-test and ”Fail-safe” function. - Three alarm levels with relays (230V / 5A) - The units can be interfaced with monitoring unit LAN63-PKT, LAN63/64-PKT or to other equipment which accepts a volt
free relay inputs - Ambient temperature: -40oC...+50oC - Humidity: 0…95% Rh (none condensing) Order code Model Description PG EURO
GD Room mounting 160x80x60 mm IP21
37-225 GD230-HFC 0-4000 ppm, 230 VAC A 412
37-220 GD24-HFC 0-4000 ppm, 12-24 VAC/DC A 386
GS Splash proof, room mounting 160x130x60mm IP54
37-425 GS230-HFC 0-4000 ppm, 230 VAC A 529
37-420 GS24-HFC 0-4000 ppm, 12-24 VAC/DC A 504
GSR Splash proof, room mounting with remote sensor, 5m cable 160x130x60mm IP54
37-925 GSR230-HFC 0-4000 ppm, 230 VAC A 595
37-920 GSR24-HFC 0-4000 ppm, 12-24 VAC/DC A 569
GK Detector for duct mounting with 1,5m cable 160x80x60 mm IP54
37-825 GK230-HFC 0-4000 ppm, 230 VAC A 529
37-820 GK24-HFC 0-4000 ppm, 12-24 VAC/DC A 504
GR Detector specially designed for vent lines from pressure relief valves in refrigeration plants. Standard cable length 1,5m. 160x80x60 mm IP54
37-625 GR230-HFC 0-4000 ppm, 230 VAC A 529
37-620 GR24-HFC 0-4000 ppm, 12-24V AC/DC A 504 Factory settings: Detector type Range (ppm) Alarm levels (ppm) HFC 0 - 4000 100 / 1000 / 2000 2) Refrigerant, type HFC 2) Normal standard calibration is for R134a. The HFC detector is also used for HCFC and CFC.
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 17 (31)
(HFC) detector, for connection to monitoring unit
- Power supply from monitoring unit. - Requires connection to a monitoring unit e.g. SPU, MPU2C, MPU4C, MPU6C or G27C. 1) - Ambient temperature: -40oC...+50oC - Humidity: 0…95% Rh (none condensing) Order code Model Description PG EURO
MP-D Room mounting IP21 Dimensions 80 x 82 x 56mm
38-220 MP-D-HFC 0-4000 ppm A 289
MP-DS Splash proof, room mounting IP54 Dimensions 130 x 82 x 56mm
38-420 MP-DS-HFC 0-4000 ppm A 349
MP-DK Detector for duct mounting with 1,5m cable Dimensions 380 x Ø 25mm
38-820 MP-DK-HFC 0-4000 ppm A 349
MP-DR Detector specially designed for vent lines from pressure relief valves in refrigeration plants. IP54 Dimensions 75 x 25mm
38-620 MP-DR-HFC 0-4000 ppm A 295
1) Alarm thresholds are set in the monitoring unit and it’s normally done during commissioning. Upon request the monitoring unit can be delivered with pre-set alarm levels for specific gases. The detectors must then be connected to the specified channel. Both monitoring unit and detectors will then be marked for easier installation.
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 18 (31)
(HFC) detector, transmitter (4-20mA) Order code Model Description PG EURO
CS21 Output 4-20mA Supply 10-30VDC Ambient temperature: -30 oC…+50oC IP54
35-135 CS21-HFC 0-5000 ppm C 612
- Remote sensor Option. C 130
(HFC) detector in ATEX-classified spaces Order code Model Description PG EURO
GJ-EX ATEX-classified detector zone 1 or 2. Power supply from monitoring unit. Always connected to a monitoring unit e.g. MPU2C, MPU4C, MPU6C or G27C.
35-323 GJ-EX-HFC 0-4000 ppm NEW! C 768
(HFC) detector for room monitoring (hotels, offices etc) - Microprocessor controlled gas detector that detect leaking HFC-gas from air-condition installations, specially designed for
use in offices, hotel rooms, stores etc. - Detects all common HFC-gases and blends - Two alarm levels (high or low) and LED status indication - Built in buzzer (85 dB) - “Fail safe” function - For stand alone use or connected to a central monitoring system. - Long time stable and with 8-10 years expected lifetime Order code Model Description PG EURO
RM SPDT relay output Supply 12-24V AC/DC Ambient temperature: 0 oC…+50oC
32-220 RM-HFC 0 – 5000 ppm (standard calibration for R410A) A *)
*) Price on request. Factory settings: Detector type Range (ppm) Alarm levels (ppm) RM-HFC 0 - 5000 1000 / 4000 Refrigerant, type HFC RM-HFC is pre calibrated for (R410A) but can be delivered for other gases. Contact us for information. The HFC detector is also used for HCFC and CFC.
NEW!
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 19 (31)
Exhaust gas (VOC) detector for garages, with relay output
- Air quality sensor for garages – Measure exhaust gas and other pollutions that could appear in garages, e.g. carbon
monoxide (CO) and hydrocarbons (HC). - Microprocessor controlled unit with built-in service mode, self-test and ”Fail-safe” function. - Three alarm levels with relays (230V / 5A) - The units can be interfaced with monitoring unit LAN63-PKT, LAN63/64-PKT or to other equipment which accepts a volt
free relay inputs - Ambient temperature: -20oC...+50oC - Humidity: 0…95% Rh (none condensing) Order code Model Description PG EURO
GD Room mounting 160x80x60 mm IP21
37-265 GD230-AQS 0-200 ppm, 230 VAC A 471
37-260 GD24-AQS 0-200 ppm, 12-24 VAC/DC A 444
GS Splash proof, room mounting 160x130x60mm IP54
37-465 GS230-AQS 0-200 ppm, 230 VAC A 588
37-460 GS24-AQS 0-200 ppm, 12-24 VAC/DC A 562
GK Detector for duct mounting with 1,5m cable 160x80x60 mm IP54
37-865 GK230-AQS 0-200 ppm, 230 VAC A 588
37-860 GK24-AQS 0-200 ppm, 12-24 VAC/DC A 562 Factory settings: Detector type Range (ppm) Alarm levels (ppm) All models 0 – 200 50 / 50 / 100 1) 1) The detectors are designed to control ventilation (fans) in parking areas. The gas sensor is NOT specific to carbon monoxide (CO) and the sensor will also react to other gases and fumes which may be present in parking areas such as fuel vapour, exhaust emissions and hydrocarbons. (VOC)
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 20 (31)
Exhaust gas detector for (CO) and (NO2), transmitter (4-20mA / 0-10V) - Detectors for demand-controlled ventilation in parking garages etc. - The detectors measure the concentration of carbon monoxide (CO) and nitrogen oxides (NOx) exhausted from cars and trucks - Electrochemical sensor for high accuracy and stable signal - Output 4-20mA or 0-10 V linear - Power supply 12 – 28 VDC - Ambient temperature -10oC...+40oC - Humidity 0…90% Rh (non condensing) Order code Model Description PG EURO
TR-EC-CO Carbon monoxide transmitter with electrochemical sensor. IP56 Lifetime sensor ~ 6 years Dimensions 80 x 82 x 56mm
39-4260 TR-EC-CO 0-300 ppm (CO) A 351
TR-EC-NO2 Nitrogen dioxide transmitter with electrochemical sensor. IP56 Lifetime sensor ~ 2 years Dimensions 80 x 82 x 56mm
39-4240 TR-EC-NO2 0-10 ppm (NO2) A 536
NEW!
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 21 (31)
Flammable and explosive gas detector, with relay output
- Microprocessor controlled unit with built-in service mode, self-test and ”Fail-safe” function. - Three alarm levels with relays (230V / 5A) - The units can be interfaced with monitoring unit LAN63-PKT, LAN63/64-PKT or to other equipment which accepts a volt
free relay inputs - Ambient temperature: -40oC...+50oC - Humidity: 0…95% Rh (none condensing) Order code Model Description PG EURO
GD Room mounting 160x80x60 mm IP21
37-295 GD230- Propane 0-40% LEL, 230 VAC A 379
37-290 GD24- Propane 0-40% LEL, 12-24 VAC/DC A 352
37-285 GD230- Methane 0-40% LEL, 230 VAC A 379
37-280 GD24- Methane 0-40% LEL, 12-24 VAC/DC A 352
37-235 GD230-(HC) 0-40% LEL, 230 VAC, Hydrocarbons A 379
37-230 GD24-(HC) 0-40% LEL, 12-24 VAC/DC, Hydrocarbons A 352
37-275 GD230-(H2) 0-40% LEL, 230 VAC, (Hydrogen) A 471
37-270 GD24-(H2) 0-40% LEL, 12-24 VAC/DC, (Hydrogen) A 444
GS Splash proof, room mounting 160x130x60mm IP54
37-495 GS230- Propane 0-40% LEL, 230 VAC A 496
37-490 GS24- Propane 0-40% LEL, 12-24 VAC/DC A 471
37-485 GS230- Methane 0-40% LEL, 230 VAC A 496
37-480 GS24- Methane 0-40% LEL, 12-24 VAC/DC A 471
37-435 GS230-(HC) 0-40% LEL, 230 VAC, Hydrocarbons A 496
37-430 GS24-(HC) 0-40% LEL, 12-24 VAC/DC, Hydrocarbons A 471
37-475 GS230-(H2) 0-40% LEL, 230 VAC, (Hydrogen) A 588
37-470 GS24-(H2) 0-40% LEL, 12-24 VAC/DC, (Hydrogen) A 562
GSR Splash proof, room mounting with remote sensor, 5m cable 160x130x60mm IP54
37-995 GSR230-Propane 0-40% LEL, 230 VAC A 594
37-990 GSR24-Propane 0-40% LEL, 12-24 VAC/DC A 568
37-985 GSR230-Methane 0-40% LEL, 230 VAC A 594
37-980 GSR24-Methane 0-40% LEL, 12-24 VAC/DC A 568
37-935 GSR230-(HC) 0-40% LEL, 230 VAC, Hydrocarbons A 595
37-930 GSR24-(HC) 0-40% LEL, 12-24 VAC/DC, Hydrocarbons A 569
Factory settings: Detector type Range Alarm levels All models 0 – 40% LEL 5 / 10 / 20% LEL
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 22 (31)
Flammable and explosive gas detector, for connection to monitoring unit
- Power supply from monitoring unit. - Requires connection to a monitoring unit e.g. SPU, MPU2C, MPU4C, MPU6C or G27C. 1) - Ambient temperature: -40oC...+50oC - Humidity: 0…95% Rh (none condensing) Order code Model Description PG EURO
MP-D Room mounting IP21 Dimensions 80 x 82 x 56mm
38-230 MP-D-(HC) 0-40% LEL A 262
38-280 MP-D-Methane 0-40% LEL A 262
38-290 MP-D-Propane 0-40% LEL A 262
MP-DS Splash proof, room mounting IP54 Dimensions 130 x 82 x 56mm
38-430 MP-DS-(HC) 0-40% LEL A 328
38-470 MP-DS-(H2) 0-40% LEL A 375
38-480 MP-DS-Methane 0-40% LEL A 328
38-490 MP-DS-Propane 0-40% LEL A 328
1) Alarm thresholds are set in the monitoring unit and it’s normally done during commissioning. Upon request the monitoring unit can be delivered with pre-set alarm levels for specific gases. The detectors must then be connected to the specified channel. Both monitoring unit and detectors will then be marked for easier installation.
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 23 (31)
Flammable and explosive gas detector, transmitter (4-20mA) Order code Model Description PG EURO
CS21 Output 4-20mA Supply 10-30VDC Ambient temperature -30 oC ... +50oC IP54
35-137 CS21-Metan-50 0-50% LEL C 612
- Remote sensor Option. C 130
Order code Model Description PG EURO
TR5200 Catalytic sensor for flammable gas Output 4..20mA Supply 12-30VDC Ambient temperature -20 oC ... +50oC. IP54
35-450 TR5200-DC 0-100% LEL B 589
Flammable and explosive gas detector, (ATEX) Order code Model Description PG EURO
GJ-EX ATEX-classified detector (zone 1 or 2) for explosive and flammable gases including Ammonia. Power supply from monitoring unit. Always connected to a monitoring unit e.g. SPU, MPU2C, MPU4C, MPU6C or G27C.
35-320 GJ-EX-(HC) 0-40% LEL. C 768
35-322 GJ-EX-(H2) 0-40% LEL. C 768
Factory settings: Detector type Range Alarm levels GJ-EX 0 – 40% LEL 5 / 10 / 20% LEL 1) 1) Alarm thresholds are set in the monitoring unit and it’s normally done during commissioning. Upon request the monitoring unit can be delivered with pre-set alarm levels for specific gases.
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 24 (31)
(CO2) carbon dioxide detector, with relay output
- Microprocessor controlled unit with built-in service mode, self-test and ”Fail-safe” function. - Three alarm levels with relays (230V / 5A) - Infrared absorption (NDIR) detection with high selectivity and long-term stability. - The units can be interfaced with monitoring unit LAN63-PKT, LAN63/64-PKT or to other equipment which accepts a volt
free relay inputs. - Ambient temperature: See below - Humidity: 0…95% Rh (none condensing) Order code Model Description PG EURO
GS IP56
Range 0 –10 000 ppm 160x130x60 mm
37-412 GS24-CO2-10000 12-24 VAC/DC, temp. 0o…+ 50oC A 638
37-417 GS230-CO2-10000 230 VAC, temp. 0o…+ 50oC A 662
37-412-H GSLT24-CO2-10000 12-24 VAC/DC, low temp -30o…+ 50oC A 735
Factory settings: Detector type Range (ppm) Alarm levels (ppm) Model -10000 0 - 10000 2000 / 2000 / 4000
(CO2) carbon dioxide detector, for connection to monitoring unit
- Infrared absorption (NDIR) detection with high selectivity and long-term stability. - Measurement range 0-10 000 ppm - Power supply from monitoring unit. - Requires connection to a monitoring unit e.g. SPU, MPU2C, MPU4C, MPU6C or G27C. 1) - Ambient temperature: See below - Humidity: 0…95% Rh (none condensing) Order code Model Description PG EURO
MP-D IP21 80 x 82 x 56mm
38-210 MP-D-CO2 Temp: 0oC … + 50o C A 395
MP-DS Splash proof IP56 80 x 82 x 86mm
38-410 MP-DS-CO2 Temp: 0oC … + 50o C A 427
38-410-H MP-DSLT-CO2 Low temperature -30oC … + 50o C A 476
1) Alarm thresholds are set in the monitoring unit and it’s normally done during commissioning. Upon request the monitoring unit can be delivered with pre-set alarm levels for specific gases. The detectors must then be connected to the specified channel. Both monitoring unit and detectors will then be marked for easier installation.
NEW!
NEW!
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 25 (31)
(CO2) carbon dioxide detector, transmitter (4-20mA / 0-10V)
- Infrared absorption (NDIR) detection with high selectivity and long-term stability. - Output 4-20mA or 0-10 V linear - Power supply 20 – 28 VDC - Ambient temperature: See below - Humidity: 0…95% Rh (none condensing) - Optional, Duct mounting kit available on request Order code Model Description PG EURO
TR-IR Splash proof IP56 Dimensions 80 x 82 x 86mm
39-4312 TR-IR-CO2 0-10 000 ppm, Temperature: 0°C ... +50° C A *)
39-4312-H TRLT-IR-CO2 0-10 000 ppm, For cold rooms, Low temperature: -30°C ... +50°C A *)
*) Price on request. Expected delivery from fall 2010.
NEW!
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 26 (31)
(CO2) carbon dioxide detector, other
- Infrared absorption (NDIR) detection with high selectivity and long-term stability. - Range 0-2000ppm or 0-5000ppm. - Output: Volt free relay, 0-10V or 4-20mA analogue output. - Fast response time and easy to calibrate Order code Model Description PG EURO
aSense Room mounting with relay and display. Ambient temperature 0…+50oC 120x82x30mm
36-110 aSENSE-R-D 0-2000 ppm, IP21, 24VAC/DC B 587
36-120 aSENSE-5000-R-D 0-5000 ppm, IP21, 24VAC/DC B 610
aSENSE IP54
Splash proof detector with relay and display Ambient temperature 0 …+50oC 150x85x48mm
36-112 aSENSE-R-D-IP54 0-2000 ppm, IP54, 24VAC/DC B 688
36-122 aSENSE-5000-R-D-IP54 0-5000 ppm, IP54, 24VAC/DC B 711
UG-aSense Duct mounting with relay and display. Ambient temperature 0 … +50oC 110x287x159mm Tube length 600mm
36-115 UG-aSENSE-R-D 0-2000 ppm, IP54, 24VAC/DC B 655
36-125 UG-aSENSE-5000-R-D 0-5000 ppm, IP54, 24VAC/DC B 679
LT-aSense For installation in cold rooms, with relay output Built in heater, NOTE! power consumption up to 2A Ambient temperature -30oC...+50oC 180x95x65mm
36-130 LT-aSENSE-5000-R 0-5000 ppm, IP54, 24VAC/DC B 1069 Factory settings: Detector type Range (ppm) Alarm levels (ppm) aSENSE (all models) 2) 0-2000 ppm 1000 ppm aSENSE-5000 (all models) 2) 0-5000 ppm 2000 ppm 2) Detectors type aSENSE are available in different models and measuring ranges.
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 27 (31)
(O2) detector for oxygen Order code Model Description PG EURO
GMA36 Pro
Stand alone or connected to a monitoring unit. Display Outputs, three relays Electrochemical sensor Measuring range 0 - 30% (O2)
35-190 GMA36-(O2) 0 - 30% (O2), supply 85...264V C 1373
(O2) detector for oxygen, (ATEX) Order code Model Description PG EURO
EC28
Stand alone or connected to a monitoring unit. Electrochemical sensor Output 4-20mA Supply 15…30VDC Option, LCD Display
35-1421 EC 28 EX-(O2) 0 - 25% (O2), ATEX C 1029
35-1422 EC 28 EX-(O2)-D 0 - 25% (O2), ATEX, With display C 1316
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 28 (31)
Portable detectors
Carbon dioxide (CO2) Order code Model Description PG EURO
aSENSE-alarm (CO2)
Non-Dispersive Infrared (NDIR) LED’s and audible signal for alarm. Internal automatic self-diagnostic function and easy to calibrate. Charger and leather bag included
50-001 aSENSE-alarm 0 - 3% CO2 C 696
Ammonia, (O2) and toxic gas Order code Model Description PG EURO
MICRO IV
Detector for toxic gases, including Ammonia, and oxygen. Electrochemical sensor Audible and visual alarm. Display ATEX classified. Pump as option
50-120 MicroIV - NH3 - 200 0 - 200 ppm C 705
50-1201 MicroIV - NH3 - 500 0 - 500 ppm C 705
50-121 MicroIV - O2 0 - 25% C 423
Order code Model Description PG EURO
Microtector II
Detector for 1-6 different gases. Display. ATEX classified.
50-130 G450 4 gases C *)
50-131 G460 6 gases C *)
*) Price on request
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 29 (31)
Auxiliary equipment
Battery back-up Order code Model Description PG EURO
UPS
Output: 12V DC Maximal load: 1,5A Battery: 12V / 2Ah Housing: Plastic, IP67 Dimensions: 230x140x95mm
40-210 UPS1500 A 489
UPS
Output: 6, 12 or 24V DC Maximal load: 4,0A Batteries: 12V / 7Ah (Battery to be ordered separately) Housing: Metal, IP21 Dimensions: 370x315 x95mm
40-220 UPS4000 A 504
80-320 Battery 12V/7,2Ah weight 2,4 kg Net 34
Transformer Order code Model Description PG EURO
PSS Power supply: 230V AC Secondary: 12V AC or 24V AC Housing: IP30
40-510 PSS32/12V 230/12V 32VA, IP30 Net 56
40-520 PSS60/24V 230/24V 60VA, IP30 Net 61
BE Flashing lights Order code Model Description PG EURO
BE
IP43 (IP65 with SOCK-H-R, option) Colours: Red, blue or amber (for other colours please contact us). If 230V supply always IP65
40-4021 BE-A-24VDC Amber, 9 - 60VDC B 66
40-4022 BE-R-24VDC Red, 9 - 60VDC B 66
40-4023 BE-BL-24VDC Blue 9 – 60VDC B 66
FL IP43 (IP65 with SOCK-H-R, option) If 230V supply always IP65
40-440 FL-RL-R Combined flashing light and siren, Red, 18 - 28VDC B 153
40-415 SOCK-H-R Socket IP65 B 11
40-420 SOCK-H-R-230 Socket 230V AC, IP65 B 50
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 30 (31)
Auxiliary equipment
Siren Order code Model Description PG EURO
1992-LP IP54 (IP65 with optional socket) Programmable with DIP-switch for different sound.
40-410 1992-R-LP 9-28 VDC, Red B 60
40-415 SOCK-H-R Socket IP65 B 11
40-420 SOCK-H-R-230 Socket 230V AC, IP65 B 50
GR-cable Order code Model Description PG EURO
GR-cable Extra long oil-resistant soft cable to GR-detectors, with pre mounted plug-in terminal for PCB and pre-mounted socket for gas sensor.
33-601 GR- cable 2,5m A 50
33-602 GR- cable 5,0m A 63
33-603 GR- cable 8,0m A 81
Wall mounted enclosures Order code Model Description PG EURO
Enclosure accepts one G27C, a PSS 32/12 transformer plus two optional relays.
40-600 N10-55L With transparent lid, IP54 A 49
Product catalogue 10
www.samon.se tel: +46 - 40 - 155859 fax: +46 - 40 - 156031 Catalogue 10 EURO 1008.doc page 31 (31)
Auxiliary equipment
Service tools - SA100: Service tool for control and calibration of detectors type GD/GS/GR2.0 and for monitoring unit G27C. - SA200: Service tool for control and calibration of detectors type GD/GS/GR/GK/GSR230, GD/GS/GR/GK/GSR24 and for detectors connected to monitoring unit SPU, MPU2C/..4C/..6C. Order code Model Description PG EURO
SA100 / SA200
60-110 SA100 Net 78
60-120 SA200 Net 78
Options, Service and Commissioning
Order code Model Description PG EURO
90-100 Service engineer, per hour Net *)
90-101 Design and consultancy, per hour Net *) 90-110 Travelling costs, contact us for information Net *)
Changing of standard pre-set alarm levels, (in combination with new orders)
60-300 Pre-set alarm levels/channel (Gx24/Gx230-series, SPU, MPU) Net 25
*) Price on request
Terms and conditions of sale - All prices in Euro, Ex-works, packing included - Delivery terms, NL01, (Incoterms 2000) - Proforma payment. Credit terms 30 days net by wire transfer. - We reserve the right to change prices without notification. - Technical specifications subject to alteration.
SAMON ABMODEMGATAN 2
S-235 39 VELLINGESWEDEN
TEL + 46 – (0)40 – 15 58 59FAX + 46 – (0)40 – 15 60 31
WWW.SAMON.SE
Distributor: