Cape Networks
2 Getting Started 3
3 Features 5 3.1 At-A-Glance Network Health Status . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.2 Backup
Mobile Connection . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 5 3.3 Last Gasp Power Backup . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 5 3.4 Configured SSID Statistics Reporting . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 5 3.5 Network
Statistics Reporting . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 6 3.6 Internal and External Service
Statistics Reporting . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 6 3.7 Sensor Info Reporting . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3.8 WiFi
Environment Data Reporting (AP Scan Data) . . . . . . . . . . . . .
. . . . . . . . . . . . . . 6 3.9 Data Export . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 7 3.10 Automatic Network Issue Detection . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 7 3.11
Threshold-Based Issue Detection . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 7 3.12 Packet Capture . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 8 3.13 Captive Portal Testing . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3.14
Support for Enterprise WiFi Security . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 8 3.15 Email Alerting . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 8 3.16 Admin and Restricted User Configuration . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3.17
Sensor Grouping & Group Based User Permissions . . . . . . . .
. . . . . . . . . . . . . . . . . . . 8 3.18 Service and Network
Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 9
4 Dashboard Overview 11
5 Dashboard Pages 13 5.1 The Dashboard . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.2 Sensor Page . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 14 5.3 SSID Page . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 17 5.4 DNS and DHCP Pages . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.5 Internal/External Services Pages . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 18 5.6 Search Page . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 18
6 Configuration 19 6.1 Sensors . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6.2 WiFi . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 19
i
6.3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 20 6.4 Thresholds . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 21 6.5 Alerts . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 21 6.6 User Management . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 21 6.7 My Account . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 21
7 Sensor Overview 23
8 Installation Guide 25 8.1 Quick Mounting . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25 8.2 Secure Mounting . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 26 8.3 Fixed Mounting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 27
9 Sizing Guide 29 9.1 General Guidelines . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
9.2 SMB and Enterprise . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 30 9.3 Hotels . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 30 9.4 Hospitals . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 30 9.5 Education . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 30 9.6 Shopping
center or mall . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 31 9.7 Arena . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 31
10 Status Light Colour Reference 33 10.1 Examples . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 33
11 Sensor Hardware 35 11.1 WiFi . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35 11.2 Backup connectivity . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 35 11.3 Power . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 35 11.4 Backup power . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 35 11.5 Mounting . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 35 11.6 Secure
mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 36 11.7 Size . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 36 11.8 Color . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
11.9 Status indicators . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 36 11.10 Environment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 36 11.11 Processor . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 36 11.12 Operating system . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
12 Frequently Asked Questions 37 12.1 How do I order more Cape
Sensors? . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 37 12.2 How many Cape Sensors do I need to monitor my
network? . . . . . . . . . . . . . . . . . . . . . . 37 12.3 Where
can I place Cape Sensors? . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 37 12.4 I have a captive portal. Can
Cape test the captive portal experience? . . . . . . . . . . . . .
. . . . . 37 12.5 How secure are Cape Sensors? . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 12.6 Can
I move Cape Sensors after installing them? . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 38 12.7 What mobile networks are
supported? . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 38 12.8 Where can I get more Command strips? . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ii
2 Chapter 1. Introduction
3
CHAPTER 3
3.1 At-A-Glance Network Health Status
The main dashboard view provides 5 ‘traffic lights’, each of which
display the high level status of a particular area of network
health, by means of turning either green (all good), yellow
(warnings detected), or red (errors detected). Each of these are a
roll-up of multiple items, which also follow this colour
convention. These items can be clicked on to drill down to the root
cause of a network issue.
3.2 Backup Mobile Connection
The fully managed onboard mobile connection makes setup seamless by
removing the need to manually set up each sensor. It also provides
connectivity to the device when it cannot connect to WiFi, cannot
authenticate, or when the WiFi’s backhaul is down. A mobile
connection means the sensor is always online and always uploading
data, so you never lose sight of your network.
3.3 Last Gasp Power Backup
An array of supercapacitors provides backup power for the sensor to
notify you of power issues, make sure the network is still up, and
enter sleep mode gracefully.
3.4 Configured SSID Statistics Reporting
We report the following WiFi statistics for SSIDs sensors are
connected to:
• RSSI
• Channel Utilization
3.5 Network Statistics Reporting
• DHCP Response Time
• DNS Lookup Time
For each configured service, we report the following
statistics:
• Latency
• Throughput (Up) (Dropbox Only)
3.7 Sensor Info Reporting
• Gateway
For each detected AP, we report the following data:
• SSID
• RSSI
• Channel Number
• Channel Width
• Supported Data Rates
3.9 Data Export
All the aforementioned data can be exported to file, for periods of
either the last day, the last week, the last 2 weeks, or all
time.
3.10 Automatic Network Issue Detection
We automatically detect, triage, and determine root-cause for a
large number of issues in areas including:
• AP association
• Connectivity to service
These issues are then reported via alerts and on the dashboard,
where they can be inspected by users.
3.11 Threshold-Based Issue Detection
We provide users the ability to configure threshold-based issue
detection on statistics such as:
• Low RSSI
• Low Bitrate
• High Retry Rate
• High Channel Utilisation
3.12 Packet Capture
We provide a mechanism whereby sensors can capture network traffic,
either on-demand, or automatically when an error is first detected.
These packet captures can then be downloaded from the dashboard as
PCAP files.
3.13 Captive Portal Testing
Our sensors can operate correctly on networks that have captive
portals (provided the necessary portal details).
3.14 Support for Enterprise WiFi Security
We support the following WiFi authentication methods:
• Open
• Certificate based (EAP TLS)
3.16 Admin and Restricted User Configuration
Users can be created with either Admin access, or Restricted to
selected sensor groups.
3.17 Sensor Grouping & Group Based User Permissions
Sensors can be organized into named groups which can then be
manipulated as a unit, for example to configure tests or to grant
users access.
8 Chapter 3. Features
3.18.1 Predefined Tests for Common Services
Service Connectivity
We provide service connectivity tests by conducting ICMP pings,
port connectivity checks and basic HTTP checks to service
endpoints. The following list of predefined service connectivity
checks are available:
• Adobe Creative Cloud
• Okta
• Salesforce
• Slack
• Zendesk
• Zenefits
Dropbox
In addition to service connectivity, the DropBox test also performs
throughput testing by uploading and downloading files to
DropBox.
3.18. Service and Network Testing 9
Cape Dashboard Documentation, Release 0.1.1
Skype
The Skype test performs Microsoft’s media quality and network
connectivity performance test. Details around this test can be
found here.
YouTube
In addition to service connectivity, the YouTube test also performs
throughput testing to YouTube.
3.18.2 User Customizable Network Tests
Zap
Ruckus Wireless Zap tests uplink and downlink throughput to Ruckus
access points. Details around Zap testing can be found here.
iPerf3
iPerf is a tool for testing maximum achievable bandwidth on IP
networks. This test requires an iPerf3 server that is reachable by
the sesensor. More details about iPerf can be found on the iPerf
website.
Generic
The generic template allows you to perform ping tests against any
port.
Webserver
The webserver test performs connectivity tests to HTTP (port 80)
and HTTPS (port 443) endpoints, as well as checking the HTTP status
code that is returned.
Printer
The printer test performs a connectivity test to any networked
printer.
10 Chapter 3. Features
CHAPTER 4
Dashboard Overview
The Cape Dashboard is the product of years of frustration with
existing tools, plus decades of usability, information design and
software development expertise. Your job is difficult enough
already. We want you to have a dashboard that you don’t need to
learn, and don’t need a certification to use.
11
CHAPTER 5
Dashboard Pages
5.1 The Dashboard
The dashboard consists of two views, which can be toggled using the
buttons in the upper left corner of the screen:
• Dashboard View
• Sensor View
• Experience
• WiFi
• Network
• Internal
• External
Experience
Network
• Map View
Sensors By Status
5.2 Sensor Page
5.2.1 Issue Detail modal
In the Status box on the left side of the Sensor page you can see
all Ongoing, Unconfirmed, and Resolved issues. Clicking on any of
these issues will allow you to further drill down into the details
of it.
5.2. Sensor Page 15
Cape Dashboard Documentation, Release 0.1.1
In this example, we are drilling down into a DHCP issue where the
sensor was not assigned an IP by a DHCP server. In the detail page
you can see the exact time of the issue, the affected test, and our
root cause analysis (typically referred to as ‘triage’).
Most of the triage sections are expandable, allowing you to see the
raw output of the commands. Here we have ex- panded the No DHCP
Offers section to see exactly what is happening - the raw output
shows us that two DHCPDIS- COVER events were triggered, but there
was no resulting DHCPOFFER from the network. Furthermore, we can
see the exact timing of these events (indicated by the
arrow).
16 Chapter 5. Dashboard Pages
Cape Dashboard Documentation, Release 0.1.1
Types of issues
• DHCP did not return an IP
– shows the raw output from dhclient, including timing of the
entire DORA (Discovery, Offer, Request, Acknowledge) process.
5.3 SSID Page
Describe DNS and DHCP pages here
5.3. SSID Page 17
5.5 Internal/External Services Pages
Describe service pages here
CHAPTER 6
• Sensor Management
• Group Management
6.2.1 SSID
An SSID (Service Set Identifier) is the name used to identify the
network.
19
6.2.2 SSID Alias
Allows for multiple SSIDs with the same name to be configured
separately, e.g., one can be configured for 2.4 GHz, and one for 5
GHz.
6.2.3 Hidden
If the SSID name is broadcasted or not, i.e. if the name will be
displayed in an AP scan.
6.2.4 Security
• Open: No security required
• Passphrase: Passphrase/password is required
– Username and Certificate (EAP TLS)
6.2.5 Band Locking
• Auto: Switch based on most appropriate band
• 2.4: Only test 2.4 GHz band
• 5: Only test 5 Ghz band
6.2.6 External Connectivity Toggle
6.3 Testing
• Test Configuration
• Core Configuration
6.3.2 Core Configuration
22 Chapter 6. Configuration
CHAPTER 8
Installation Guide
Quick Mounting
On walls or other vertical surfaces that are painted, stained or
varnished wood, glass, tile, painted cinder block, plaster, metal,
and painted wallboard.
Secure Mounting
In any public or semi-public area, or any other location where the
sensor should not be removed without tools.
Fixed Mounting
On any other surface, including ceilings and all other horizontal
surfaces, wallpaper, fresh paint (less than one week old), rough
surfaces— such as cement board, unpainted cinder block, brick or
rough-sawn wood.
8.1 Quick Mounting
For walls or other vertical surfaces that are painted, stained or
varnished wood, glass, tile, painted cinder block, plaster, metal,
and painted wallboard. On any other surface, the adhesive strips
may not stick over time.
If you are unsure about whether the surface is appropriate for
quick mounting, use fixed mounting. In any public or semi-public
area, or any other location where the sensor should not be
removable without tools, use secure mounting.
Note: Ensure surface is cleaned with alcohol before
installation—not household or industrial cleaner, which leaves a
thin residue.
Step 1
Cape Dashboard Documentation, Release 0.1.1
Power up you sensor. Use either Power over Ethernet (PoE) or the
supplied power adapter (DC).
Warning: do not plug in PoE and DC simultaneously, as this reduces
the sensor’s lifespan.
Step 2
Step 3
Remove liner, stick to a dry, clean wall with arrow pointed upwards
and hold for 30 seconds.
Step 4
Slide the sensor onto the mounting bracket. Wait for the light to
begin blinking green and proceed to the dashboard to configure the
sensor.
8.2 Secure Mounting
You will need: Phillips screw driver size 2 and a drill bit 13/64
(#9 / 5mm)
Note: Always use appropriate protective gear when drilling or
operating machinery. Check for electrical wiring before drilling
into walls.
For dry wall mounting use the dry wall anchor. For brick wall
mounting, use the masonry plug.
Step 1
Power up you sensor. Use either Power over Ethernet (PoE) or the
supplied power adapter (DC).
Warning: do not plug in PoE and DC simultaneously, as this reduces
the sensor’s lifespan.
Step 2
Use the supplied drill stencil to drill holes for the security fins
AND mounting bracket.
Step 3
Screw the mounting bracket into the wall. See Wall Fasteners above
for what to use in different wall types.
Step 4
Step 5
Slide the sensor with security fins onto the mounting
bracket.
26 Chapter 8. Installation Guide
Cape Dashboard Documentation, Release 0.1.1
Step 6
Screw the security fins into the wall. Wait for the light to begin
blinking green and proceed to the dashboard to configure the
sensor.
8.3 Fixed Mounting
You will need: Phillips screw driver size 2 and a drill bit 13/64
(#9 / 5mm)
Warning: Always use screws for mounting on ceilings or other
horizontal surfaces. Do not rely on the adhesive tape alone.
Note: Always use appropriate protective gear when drilling or
operating machinery. Check for electrical wiring before drilling
into walls.
For dry wall mounting use the dry wall anchor. For brick wall
mounting, use the masonry plug.
Step 1
Power up you sensor. Use either Power over Ethernet (PoE) or the
supplied power adapter (DC).
Warning: do not plug in PoE and DC simultaneously, as this reduces
the sensor’s lifespan.
Step 2
Use the supplied drill stencil to drill holes for the security fins
AND mounting bracket.
Step 3
Screw the mounting bracket into the ceiling/surface. See Wall
Fasteners above for what to use in different wall types.
Step 4
Slide sensor onto mounting bracket and make sure you feed the cable
correctly through the gap.
8.3. Fixed Mounting 27
CHAPTER 9
Sizing Guide
The number of Sensors you need depends on your environment and
monitoring needs. Here are some guidelines which can help you
decide how many Sensors are right for you.
9.1 General Guidelines
• Place at least one Sensor in each area that users congregate or
use WiFi the most, and in areas with WiFi complaints
• Place Sensors in areas with WiFi or network performance concerns
or complaints
• Place Sensors in locations that are difficult, time consuming or
expensive to reach in person (e.g. remote branches)
• Place Sensors in any areas with mission-critical equipment
connected to WiFi
• Use at least one Sensor per SSID tested
• Do not place Sensors in areas with access points that get very
little data traffic such as coverage access points on the edge of
your building or in less frequented areas (e.g. storage
rooms)
• In large networks with multiple access and aggregation switches,
consider placing at least one Sensor per access switch
• Try not to move Sensors after installation as this invalidates
comparisons with historical data. If you plan to move a Sensor to
trouble spots in response to user complaints, we recommend keeping
a spare Sensor for temporary, tactical deployments
• Typically, expect a ratio of one Sensor for every six to 24
Access Points
• When in doubt, start small and add more Sensors over time
• Speak to a Cape product expert if you need more information
Read on for additional guidelines and ideas by type of
environment.
29
9.2 SMB and Enterprise
• 1 Sensor per:
– Remote branch
9.3 Hotels
• 1-3 Sensors in the hallway on each of the hotel floors
• 1-2 Sensors per lobby
– Restaurant or cafeteria
9.4 Hospitals
• 1-3 Sensors in the hallway of each hospital floor
• 1-2 Sensors in high occupancy staff / nurse and doctor areas
(kitchen, working quarters, resting areas, finance, insurance,
medical records etc.)
• 1 Sensor per:
– Lobby or reception areas (ground level and receptions on
respective floors)
– Cafeteria or food court
9.5 Education
• 1-3 Sensors in the hallway of each university or school
floor
• 1-2 Sensors per cafeteria
30 Chapter 9. Sizing Guide
Cape Dashboard Documentation, Release 0.1.1
• 1-2 Sensors per indoor sports facility
• 1-2 Sensors per high occupancy staff/teacher/management areas
(kitchen, working areas, principal office, fi- nance and
accounting, etc.)
• 1 Sensor per:
– Laboratory
• 1-2 Sensors per major store / anchor tenant
• 1 Sensor per entrance area
• 1 Sensor near rest rooms
9.7 Arena
The number of Sensors needed highly depends on the venue size and
capacity. Please get in touch for a free assessment.
9.6. Shopping center or mall 31
CHAPTER 10
10.1 Examples
Green flashing: waiting for configuration.
33
34 Chapter 10. Status Light Colour Reference
CHAPTER 11
Sensor Hardware
11.1 WiFi
11.2 Backup connectivity
• Gigabit ethernet 10/100/1000
• 3G (HSPA+) connection with fully managed SIM card and
service
11.3 Power
• AC power adapter
11.4 Backup power
Last-gasp power backup using an array of supercapacitors provides
extra connectivity when there is no power.
11.5 Mounting
Wall and ceiling mounting bracket with adhesive backing for quick
install. Adhesive: no-residue 3M Command Strips. Recommended
mounting location: near users, on a wall or pillar ±4-5 feet
(±1.5m) off the ground
35
11.6 Secure mounting
Mounting bracket can be screwed to wall or ceiling for added
security. Included security fins prevent removal from mounting
bracket without a screwdriver.
11.7 Size
6 x 6 x 1.6 inches / 152 x 152 x 40mm
11.8 Color
• Green power LED on underside
11.10 Environment
Indoors, 14 to 113 degrees Fahrenheit / -10 to 45 degrees
Celcius
11.11 Processor
11.12 Operating system
CHAPTER 12
12.1 How do I order more Cape Sensors?
Adding new sensors is easy. Get in touch with us online or send an
email to
[email protected].
12.2 How many Cape Sensors do I need to monitor my network?
As a rule of thumb, place at least one sensor in each of the areas
where your users congregate and use WiFi the most, or areas with
WiFi performance concerns. In large networks with multiple access
and aggregation switches, consider placing at least one sensor per
access switch. In most cases, plan for one sensors for every 6
access points (in smaller venues) up to every 24 access points (for
larger venues). When in doubt, start smaller—it is easy to add more
sensors over time.
See our Sizing Guide for more.
12.3 Where can I place Cape Sensors?
Each sensor should be as close to users as possible. You can place
it on a desk, or use the mounting plate to mount it on a wall or
pillar. The mounting bracket works on ceilings too, but the sensor
will provide better data on a wall or desk. Avoid placing sensors
inside closets, near metal, or within 7 feet (2 metres) of an
Access Point. You can use either POE or AC as a power source.
12.4 I have a captive portal. Can Cape test the captive portal
experi- ence?
Yes! Cape is perfect for testing captive portals. We’ve found that
captive portals can generate a disproportional percentage of the
issues we detect. Get in touch to find out how to setup captive
portal testing.
12.5 How secure are Cape Sensors?
We have engineered our sensors with security in mind. In short, if
your network allows BYOD or IoT devices, the Cape Sensor is likely
to be more secure than other devices on your network today. Several
large companies with strict security policies trust our sensors on
their internal networks.
See our Security Policy for more.
12.6 Can I move Cape Sensors after installing them?
Yes, but we don’t typically recommend it. Moving a sensor means the
new data it collects is not comparable with its historical data. If
you would like a device to move around to trouble spots in response
to user complaints we recommend keeping a spare sensor for
temporary, tactical deployments. Alternatively consider
preemptively placing additional sensors in areas where users
congregate or use WiFi the most.
12.7 What mobile networks are supported?
Mobile coverage is required to take advantage of Cape’s
Ethernet-free setup process and to provide backup connectiv- ity in
the event of a network outage.
Supported providers are:
Additional Command Strips can be purchased from 3M or Amazon.
38 Chapter 12. Frequently Asked Questions
Sensor Info Reporting
Data Export
Email Alerting
Sensor Grouping & Group Based User Permissions
Service and Network Testing
How do I order more Cape Sensors?
How many Cape Sensors do I need to monitor my network?
Where can I place Cape Sensors?
I have a captive portal. Can Cape test the captive portal
experience?
How secure are Cape Sensors?
Can I move Cape Sensors after installing them?
What mobile networks are supported?
Where can I get more Command strips?