Canon Copier error errors code codes imagerunner copiers copy machine copy machinesIF MY BLOG WAS HELPFUL, PLEASE CLICK/VISIT THE ADD/SPONSOR ON THIS PAGETHANK YOU SO MUCH FOR YOUR TIME----------->
BRAND
MODEL ERROR CODE MOST LIKELY CAUSE
CANON 155 E0 The fusing unit does not heat upCANON 155 E1 The sensor motor or sensor, the DC
controller on the main board DC
controllerCANON 155 E2 The copyboard position sensor
CANON 155 E4 Main motor, Main motor PCB, DC controller
CANON 155 E5 Lens home position error
CANON 155 E6 Exposure lamp control PCB, light intensity error, DC controller
CANON 155 E7 Main motor PCB, DC controllerCANON 155 E8 Counter errorCANON 155 E9 AC drive board, DC controllerCANON 155 EC Copy board drive lockCANON 155 ED Operation panel
CANON 155 EE Main motor drive board, DC drive board
CANON FC330 E0 The fusing unit does not heat up
CANON FC330 E1 Fusing film damaged or out of position
CANON FC330 E2 Copy board drive lock or home position error
CANON FC330 E6 Blown exposure lamp or exposure lamp terminals bad contact
CANON 720, 740, 750, 770 C
Fusing film damaged or out of position the machine tries to compensate
CANON 720, 740, 750, 770 H Fusing unit overheating
CANON 720, 740, 750, 770 E0
The machine was switched OFF and ON after one of the E00X error codes
CANON 720, 740, 750, E000 Bad thermistor, thermofuse, fusing
770 element, triac or power supply
CANON 720, 740, 750, 770 E001 Bad thermistor, triac or power
supply
CANON 720, 740, 750, 770 E002 bad thermistor, thermofuse, fusing
element, triac or power supply
CANON 720, 740, 750, 770 E003 bad thermistor, thermofuse, fusing
element, triac or power supply
CANON 720, 740, 750, 770 E007 fusing film damaged or out of
position
CANON 720, 740, 750, 770 E010 main motor lock, DC power supply
CANON 720, 740, 750, 770 E064 Main power supply or Main PCB
CANON 720, 740, 750, 770 E202 scanner home position not found
CANON 720, 740, 750, 770 E210 lens home position not found
CANON 720, 740, 750, 770 E220
exposure lamp, exposure control PCB, light intensity error, main PCB
CANON 720, 740, 750, 770 E240 DC power source controller or main
power supply
CANON 720, 740, 750, 770 E261 frequency error caused by the main
power supply or the power outlet
CANON 720, 740, 750, 770 E803 main board, main power supply or
fusing lamp defective
CANON NP1010, NP1020 E000 Bad thermistor, thermofuse, fusing
element, triac or power supply
CANON NP1010, NP1020 E001 Bad thermistor, triac or power
supplyCANON NP1010, E010 main motor lock, main motor
NP1020 rotation sensor,main board
CANON NP1010, NP1020 E210 lens or scanner home position not
foundCANON 2020, 2120 E000 cuptorul nu se incalzeste
CANON 2020, 2120 E001 Bad thermistor, triac, SSR or power supply
CANON 2020, 2120 E030 Counter errorCANON 2020, 2120 E202 scanner home position not foundCANON 2020, 2120 E210 lens home position not foundCANON 2020, 2120 E400 ADF problemCANON 2020, 2120 00-53 Sorter communication downCANON 2020, 2120 E710 main boardCANON 3030, 3050 E000 Fusing unit not heating upCANON 3030, 3050 E001 Fusing unit overheatingCANON 3030, 3050 E002 Fusing unit not heating upCANON 3030, 3050 E003 Fusing unit not heating upCANON 3030, 3050 E004 SSR or exposure lamp board
CANON 3030, 3050 E010 main motor lock, main motor rotation sensor,main board
CANON 3030, 3050 E022 development unit replacement errorCANON 3030, 3050 E030 Counter errorCANON 3030, 3050 E202 scanner home position not foundCANON 3030, 3050 E204 scanner home position not foundCANON 3030, 3050 E210 lens home position not foundCANON 3030, 3050 E220 exposure lamp blown or bad contactCANON 3030, 3050 E400 ADF control board problemCANON 3030, 3050 E401 DF paper feed motor lockCANON 3030, 3050 E402 DF transport error
CANON 3030, 3050 E403 DF paper transport errorCANON 3030, 3050 E404 DF paper exitCANON 3030, 3050 E411 DF sensors problemCANON 3030, 3050 E500 Sorter control boardCANON 3030, 3050 E510 Sorter paper transport errorCANON 3030, 3050 E512 Sorter first motor lockCANON 3030, 3050 E514 Sorter second motor lockCANON 3030, 3050 E520 Stacker motor overloadedCANON 3030, 3050 E530 Sorter V motor lockCANON 3030, 3050 E531 Stapler motor overloadedCANON 3030, 3050 E535 Sorter V motor lockCANON 3030, 3050 E540 lateral movement motor lockCANON 3030, 3050 E541 lateral movement motor lockCANON 3030, 3050 E710 main board failureCANON 3030, 3050 E711 main board failureCANON 3030, 3050 E712 main board failureCANON 3030, 3050 E800 emergency shut-off relayCANON 3325, 3825 E000 Fusing unit not heating upCANON 3325, 3825 E001 Fusing unit overheatingCANON 3325, 3825 E002 Fusing unit not heating upCANON 3325, 3825 E003 Fusing unit not heating upCANON 3325, 3825 E004 SSR or exposure lamp board
CANON 3325, 3825 E010 main motor lock, main motor rotation sensor,main board
CANON 3325, 3825 E022 development unit replacement errorCANON 3325, 3825 E030 Counter errorCANON 3325, 3825 E202 scanner home position not foundCANON 3325, 3825 E204 scanner home position not found
CANON 3325, 3825 E210 lens home position not foundCANON 3325, 3825 E220 exposure lamp blown or bad contactCANON 3325, 3825 E400 ADF control board problemCANON 3325, 3825 E401 DF paper feed motor lockCANON 3325, 3825 E402 DF transport errorCANON 3325, 3825 E403 DF paper transport errorCANON 3325, 3825 E404 DF paper exitCANON 3325, 3825 E411 DF sensors problemCANON 3325, 3825 E500 Sorter control boardCANON 3325, 3825 E510 Sorter paper transport errorCANON 3325, 3825 E512 Sorter first motor lockCANON 3325, 3825 E514 Sorter second motor lockCANON 3325, 3825 E520 Stacker motor overloadedCANON 3325, 3825 E530 Sorter V motor lockCANON 3325, 3825 E531 Stapler motor overloadedCANON 3325, 3825 E535 Sorter V motor lockCANON 3325, 3825 E540 lateral movement motor lockCANON 3325, 3825 E541 lateral movement motor lockCANON 3325, 3825 E710 main board failureCANON 3325, 3825 E711 main board failureCANON 3325, 3825 E712 main board failureCANON 3325, 3825 E800 emergency shut-off relayCANON 4050, 4080 E000 Fusing unit not heating upCANON 4050, 4080 E001 Fusing unit overheatingCANON 4050, 4080 E002 Fusing unit not heating upCANON 4050, 4080 E003 Fusing unit not heating upCANON 4050, 4080 E004 SSR or exposure lamp boardCANON 4050, 4080 E010 main motor lock, main motor
rotation sensor,main boardCANON 4050, 4080 E022 development unit replacement errorCANON 4050, 4080 E030 Counter errorCANON 4050, 4080 E080 color interface problemCANON 4050, 4080 E081 vertical transport motor overloadCANON 4050, 4080 E082 horizontal transport motor overloadCANON 4050, 4080 E084 color unit sensorCANON 4050, 4080 E085 color unit position errorCANON 4050, 4080 E086 color unit position errorCANON 4050, 4080 E089 color unit position errorCANON 4050, 4080 E100 laser error
CANON 4050, 4080 E110 polygonal mirror motor not picking up speed
CANON 4050, 4080 E202 scanner home position not foundCANON 4050, 4080 E204 scanner home position not foundCANON 4050, 4080 E210 lens home position not foundCANON 4050, 4080 E220 exposure lamp blown or bad contactCANON 4050, 4080 E223 color filter motor lockCANON 4050, 4080 E240 main boardCANON 4050, 4080 E400 ADF control board problemCANON 4050, 4080 E401 DF paper feed motor lockCANON 4050, 4080 E402 DF transport errorCANON 4050, 4080 E403 DF paper transport errorCANON 4050, 4080 E404 DF paper exitCANON 4050, 4080 E411 DF sensors problemCANON 4050, 4080 E500 Sorter control boardCANON 4050, 4080 E510 Sorter paper transport errorCANON 4050, 4080 E512 Sorter first motor lock
CANON 4050, 4080 E514 Sorter second motor lockCANON 4050, 4080 E520 Stacker motor overloadedCANON 4050, 4080 E530 Sorter V motor lockCANON 4050, 4080 E531 Stapler motor overloadedCANON 4050, 4080 E535 Sorter V motor lockCANON 4050, 4080 E540 lateral movement motor lockCANON 4050, 4080 E541 lateral movement motor lockCANON 4050, 4080 E660 IC card malfunctionCANON 4050, 4080 E710 main board failureCANON 4050, 4080 E711 main board failureCANON 4050, 4080 E712 main board failureCANON 4050, 4080 E714 main board failureCANON 4050, 4080 E800 emergency shut-off relayCANON 6030 E000 Fusing unit not heating upCANON 6030 E001 Fusing unit overheatingCANON 6030 E002 Fusing unit not heating upCANON 6030 E003 Fusing unit not heating upCANON 6030 E004 SSR or exposure lamp board
CANON 6030 E010 main motor lock, main motor rotation sensor,main board
CANON 6030 E022 development unit replacement errorCANON 6030 E030 B&W counter errorCANON 6030 E031 Color counter errorCANON 6030 E064 AC drive board problemCANON 6030 E065 AC drive board problemCANON 6030 E202 scanner home position not foundCANON 6030 E203 scanner home position not foundCANON 6030 E204 scanner home position not found
CANON 6030 E210 lens home position not foundCANON 6030 E212 lens home position not foundCANON 6030 E220 exposure lamp blown or bad contactCANON 6030 E224 blank shutter not workingCANON 6030 E240 main board
CANON 6030 E244 main board to AC drive communication problem
CANON 6030 E400 ADF control board problemCANON 6030 E401 DF paper feed motor lockCANON 6030 E402 DF transport errorCANON 6030 E403 DF paper transport errorCANON 6030 E404 DF paper exitCANON 6030 E411 DF sensors problemCANON 6030 E500 Sorter control boardCANON 6030 E510 Sorter paper transport errorCANON 6030 E512 Sorter first motor lockCANON 6030 E530 Stapler motor overloadedCANON 6030 E531 Stapler motor overloadedCANON 6030 E540 lateral movement motor lockCANON 6030 E541 lateral movement motor lockCANON 6030 E710 main board failureCANON 6030 E711 main board failureCANON 6030 E712 paper feed errorCANON 6030 E716 paper tray errorCANON 6030 E800 Auto shut-off relay malfunctionCANON 6030 E901 Paper feed unit electronic boardCANON 6030 E902 Paper feed unit home position errorCANON 6050, 6650, E000 Fusing unit not heating up
8070, 8570
CANON 6050, 6650, 8070, 8570 E001 Fusing unit overheating
CANON 6050, 6650, 8070, 8570 E002 Fusing unit not heating up
CANON 6050, 6650, 8070, 8570 E003 Fusing unit not heating up
CANON 6050, 6650, 8070, 8570 E004 SSR or exposure lamp board
CANON 6050, 6650, 8070, 8570 E010 main motor lock, main motor
rotation sensor,main board
CANON 6050, 6650, 8070, 8570 E011 main drive lock, one of the motors
CANON 6050, 6650, 8070, 8570 E013 used toner transport jammed
CANON 6050, 6650, 8070, 8570 E014 pick-up motor lock
CANON 6050, 6650, 8070, 8570 E020 black toner supply mechanism
malfunction
CANON 6050, 6650, 8070, 8570 E030 Counter error
CANON 6050, 6650, 8070, 8570 E031 counter error at one option
CANON 6050, 6650, 8070, 8570 E050 duplex malfunction
CANON 6050, 6650, 8070, 8570 E051 duplex malfunction
CANON 6050, 6650, 8070, 8570 E202 scanner home position not found
CANON 6050, 6650, 8070, 8570 E203 scanner home position not found
CANON 6050, 6650, 8070, 8570 E204 scanner home position not found
CANON 6050, 6650, 8070, 8570 E210 lens home position not found
CANON 6050, 6650, 8070, 8570 E212 lens home position not found
CANON 6050, 6650, 8070, 8570 E240 main board failure
CANON 6050, 6650, 8070, 8570 E243 Operation panel
CANON 6050, 6650, 8070, 8570 E710 power supply error
CANON 6050, 6650, 8070, 8570 E711 power supply error
CANON 6050, 6650, 8070, 8570 E500 Sorter control board
CANON 6050, 6650, 8070, 8570 E510 Sorter paper transport error
CANON 6050, 6650, 8070, 8570 E512 Sorter first motor lock
CANON 6050, 6650, 8070, 8570 E530 Stapler motor overloaded
CANON 6050, 6650, 8070, 8570 E531 Stapler motor overloaded
CANON 6050, 6650, 8070, 8570 E801 thermistor, fusing unit, power
supply, main board
CANON 6050, 6650, 8070, 8570 E802 power supply or main board error
CANON 6317 E000 Fusing unit not heating upCANON 6317 E001 Fusing unit overheating
CANON 6317 E002 Fusing unit not heating upCANON 6317 E003 Fusing unit not heating upCANON 6317 E004 SSR or exposure lamp board
CANON 6317 E010 main motor lock, main motor rotation sensor,main board
CANON 6317 E030 counter errorCANON 6317 E202 scanner home position not foundCANON 6317 E208 mirrors home position not foundCANON 6317 E210 lens home position not foundCANON 6317 E220 exposure lamp blown or bad contactCANON 6317 E245 main boardCANON 6317 E261 Main power supply or Main PCB
CANON 6317 E400 communication lost between copier and ADF
CANON 6317 E500 communication lost between copier and sorter
CANON 6317 E802 Main switch, main power supply
CANON GP200, GP215 E000 Fusing unit not heating up
CANON GP200, GP215 E001 Fusing unit overheating
CANON GP200, GP215 E002 Fusing unit not heating up
CANON GP200, GP215 E003 Fusing unit not heating up
CANON GP200, GP215 E007 fusing film damaged or out of
position
CANON GP200, GP215 E010 main motor lock
CANON GP200, GP215 E030 counter error
CANON GP200, GP215 E031 counter error at one option
CANON GP200, GP215 E032 electronic counter error
CANON GP200, GP215 E051 horizontal registration home
position not found
CANON GP200, GP215 E064 High voltage drive board abnormal
output
CANON GP200, GP215 E100 BD error
CANON GP200, GP215 E110 polygonal mirror motor not picking
up speed
CANON GP200, GP215 E190 RAM error
CANON GP200, GP215 E191 communicatio lost between the
main board and the power supply
CANON GP200, GP215 E202 scanner home position not found
CANON GP200, GP215 E203 scanner home position not found
CANON GP200, GP215 E204 scanner home position not found
CANON GP200, GP215 E210 lens home position not found
CANON GP200, GP215 E212 lens home position not found
CANON GP200, GP215 E220 exposure lamp blown or bad contact
CANON GP200, E240 main board
GP215
CANON GP200, GP215 E243 Operation panel
CANON GP200, GP215 E261 Main power supply or Main PCB
CANON GP200, GP215 E301 exposure intensity out of range
CANON GP200, GP215 E400 ADF control board problem
CANON GP200, GP215 E401 DF paper feed motor lock
CANON GP200, GP215 E402 DF transport error
CANON GP200, GP215 E403 DF paper transport error
CANON GP200, GP215 E404 DF paper exit
CANON GP200, GP215 E411 DF sensors problem
CANON GP200, GP215 E422 copier to DF-F1 communication lost
CANON GP200, GP215 E710 main board
CANON GP200, GP215 E711 main board
CANON GP200, GP215 E712 paper feed error
CANON GP200, GP215 E716 Paper feed unit error
CANON GP200, GP215 E717 communication to the copier
controller is lost
CANON GP200, GP215 E800 Auto shut-off relay malfunction
CANON GP200, GP215 E803 power supply output out of range
CANON GP200, GP215 E901 Paper feed unit PCB malfunction
Posted by Haze bdown at 11:44 PM No comments: Email ThisBlogThis!Share to TwitterShare to FacebookShare to PinterestLabels: canon imagerunner error code codes copier copiers e003 e602 e540 e732 copiers copier copy machine copy machines error codes copier problem problems copiers copy machines errors code codes
Saturday, July 30, 2011
canon imageRunner 3035 3045 3530 3570 45704 canon: canon imageRunner 3035
3045 3530 3570 45704 canon ...IF MY BLOG WAS HELPFUL, PLEASE CLICK/VISIT THE ADD/SPONSOR ON THIS PAGETHANK YOU SO MUCH FOR YOUR TIME----------->
canon imageRunner 3035 3045 3530 3570 45704 canon: canon imageRunner 3035 3045 3530 3570 45704 canon ...: "UNIVERSAL OFFICE COPIERS (818) 282-8200 Canon Ricoh copier service and repair center LOS ANGELES CA canon imageRunner 3035 3045 3530..."Posted by Haze bdown at 9:50 AM No comments: Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest
Friday, July 29, 2011
Canon Imagerunner IR 7086 7095 7105 error codes e0:
Canon Copier imagerunner IR 7086 7095 7105 error c...IF MY BLOG WAS HELPFUL, PLEASE CLICK/VISIT THE ADD/SPONSOR ON THIS PAGETHANK YOU SO MUCH FOR YOUR TIME----------->
Canon Imagerunner IR 7086 7095 7105 error codes e0: Canon Copier imagerunner IR 7086 7095 7105 error c...: "UNIVERSAL OFFICE COPIERS 818-282-8200 LOS ANGELES CA If the code your looking for is not here just write, or call us. Product : image..."Posted by Haze bdown at 12:11 AM 1 comment: Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest
canon imageRunner 3035 3045 3530 3570
45704 canon: canon imageRunner 3035 3045 3530 3570 45704 canon ...IF MY BLOG WAS HELPFUL, PLEASE CLICK/VISIT THE ADD/SPONSOR ON THIS PAGETHANK YOU SO MUCH FOR YOUR TIME----------->
canon imageRunner 3035 3045 3530 3570 45704 canon: canon imageRunner 3035 3045 3530 3570 45704 canon ...: "UNIVERSAL OFFICE COPIERS (818) 282-8200 Canon Ricoh copier service and repair center LOS ANGELES CA canon imageRunner 3035 3045 3530..."Posted by Haze bdown at 12:05 AM No comments: Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest
Tuesday, July 19, 2011
Canon Copier imagerunner IR 7086 7095 7105 error code codes e000 001 602 540 732 copiers errorsIF MY BLOG WAS HELPFUL, PLEASE CLICK/VISIT THE ADD/SPONSOR ON THIS PAGETHANK YOU SO MUCH FOR YOUR TIME----------->
UNIVERSAL OFFICE COPIERS818-282-8200LOS ANGELES CA
If the code your looking for is not here just write, or call us.
Product : imageRUNNER 7105 / 7095 / 7086Title : E003-0000 is displayed upon recovery from sleep modeError :E003-0000 is displayed upon recovery from sleep mode
Workaround :When a machine is in sleep mode and is recovered an error code "E003-0000" was displayed. It is caused during the fixing temperature control at recovery from sleep mode, electrical noise affected the thermistor.
In order to increase the length of time for idle rotation of the drum (by 30 sec) at start-up and prevent electrical noise from affecting the thermistor, make the following selection:Service mode (Level 2)> COPIER> OPTION> BODY> DRM-IDL = change the setting to '3'
Note: The length of time for idle rotation is being increased by 30 sec. This mode will delay start of the machine by 30 sec.----------------------------------------------------------------------------------------------Product : imageRUNNER 7086 imageRUNNER 7095 imageRUNNER 7105Title : E003
Error :E003-0000 Error Code can be displayed when the reading of the main thermistor is below 70 deg. C for 2 sec. after it has exceeded 100 deg. C.
Workaround :1. Although the fixing heater or the temperature-detecting thermistor may be faulty, before replacing these parts, check J508 on the DC controller PCB for poor contact and refit it if necessary.2. Make the following selections to clear the error code: [Service mode > COPIER > Function > CLEAR > ERR > OK]-------------------------------------------------------------------------------------------------Product :imageRUNNER 7105 / 7095 / 7095 Printer / 7086Title :E004-0001 Error CodeError :E004-0001 Error Code is displayed indicating a short in the main heater circuit.
Workaround :Check the Main Heater Lamp for burnt (black) ends indicating an arc or short.Replace the Main Heater Lamp; part number FH7-4719-000. Also check for damaged wiring to the Main Heater Lamp.
Note: to clear the error perform
(COPIER>FUNCTION>CLEAR>ERR).--------------------------------------------------------------------------------Product : imageRUNNER 7086 / 7095 / 7095 Printer / 7105Title : Error Code E005-0099Error :The error code E005-0099 will not reset in service mode COPIER>FUNCTION>CLEAR>ERR. The E005 indicates the fixing web has run out. In this case the web was only half way used and the fixing web detecting lever was positioned correctly. The end user indicated the error occurred when a print job was paused.
Workaround :The error cleared after turning the copier on with the finisher off. The copier was turned off, the finisher turned on, then the copier and the machine operated normally.-----------------------------------------------------------Product : imageRUNNER 7105 / 7095 / 7095 Printer / 7086Title : Error codes E010 and E065Error :Machine will alternate between E010 and E065 .
Workaround :When you are getting this alternating error code of E010 or E065 you must check to see if you are getting 24vdc to main motor and HVDC board . The simplest way to do this is by going to the HVDC PCB and check J 721 pins 1 and 2 for 24vdc . If not there go to J 1723 on Relay PCB
and OHMS check pins 1 and 2 for continuity. This is your manual feed tray cover open/closed detection switch. If good, check pins 5 and 7 that's the front door open/closed detection switch. If either of the switches has an open it will not power the relay for output to main motor and HVDC pcb. In our case we had a bad manual feed open/closed detection switch.---------------------------------------------------------Product : imageRUNNER 7086 / 7095 / 7105Title : In Service Mode, Getting The Message Waste Toner Container Is FullProblem :Only in service mode is the message being displayed, "Waste Toner Container Is Full ".
Error code E013 and E019 do not show up at all in the Error history in service mode. Error Clear and DC CON Clear have been performed in service mode. The Waste Toner Container is empty. Sensor PS 19 (Waste Toner Full sensor) has been replaced. Microswitch 2 (MSW2) the Waste Toner Lock sensor, is operating properly. Connectors J512 and J514 on the DC CON PCB were reseated. In service mode > Copier > Counter > MISC > WST-TNR has been reset to 0 and Copier > Counter > H-DRBL-2 > W-T-PIPE has been reset to 0.
Solution :
In this case, Sensor PS 19 in I/O Mode of service mode was in a state indicating that the Waste Toner Case Is Full and not changing state when the sensor was blocked and then unblocked.
(To check PS 19 in I/O Mode enter service mode level 1 ( * 2 8 * ) > Copier > I/O > DC CON > P003 > bit 7.A state of 0 for bit 7 indicates the Waste Toner Case Is Not Full. A state of 1 for bit 7 indicates the Waste Toner Case Is Full.)
In the process of tracing the wiring for sensor PS 19 back to J514 of the DC Controller PCB, it was discovered that the interim connector, J261, in the Waste Toner Bottle Assembly, was unplugged. After re-connecting the interim connector J261, the message in service mode " Waste Toner Container Is Full ", cleared out; Bit 7 for P003 in I/O Mode was at a state of 0. Service issue was resolved.
Please refer to the illustration below for the location of the interim connector J261 and sensor PS 19:--------------------------------------------------------------
Product : imageRUNNER 7086 / 7095 / 7105Title : E020-0009Error :Error code E020-0009 could occur due to toner being packed in the tube from the toner bottle to the developer hopper. This will not allow the toner auger to turn and binds up the buffer motor (M18). You may also notice that
the toner bottle will not spin. With the buffer motor removed and power off you will not be able to turn the auger by hand.
Workaround :Remove the auger from the copier and try to vacuum out the tube to ensure no toner has hardened inside. Reinstall the auger and ensure that you can turn freely by hand.----------------------------------------------------------------Product : imageRUNNER 7086 / 7095 / 7105Title : Error Code E020-0008Error :An error code of E020-0008 is generated when a fault is detected with M22. The symptom in this instance was intermittent. M22 activated in parts check and the technician stated that there seemed to be no mechanical binding in the assembly.
Workaround :The solution for this instance was to reseat the paddle in the hopper assembly. Upon further inspection of the hopper assembly, it was noticed that the paddle had become dislodged causing it to bind periodically.
------------------------------------------------------------------Product : imageRUNNER 7086 / 7095 / 7105Title :An E020-0009 is Displayed
Problem :An E020-0009 is Displayed
Solution :The developing assembly along with including the buffer unit, buffer motor M18 and the buffer clutch CL1 had been replaced. In this case, the replacement of the entire hopper assembly resolved the problem. The part number for the entire hopper assembly is FM2-4063-000.
Note: The service manual lists this code as being for the buffer motor. Please note the TS4 sensor is part of this circuit.
The TS4 sensor is located in the sub hopper portion of the hopper assembly. It is recommended to try replacing the TS4 sensor (FK2-0158-000), before replacing the entire hopper assembly.
-----------------------------------------------------------------------Product : imageRUNNER 7105 / 7095 / 7086Title : E020-0008Problem :
An E020-0008 is when the toner feed motor is driven and a fault is detected for 3 seconds or more for the (M22) Motor. The error code of E020-0008 still occurred at power up after replacing M22.
Solution : In this case, replacing the developer unit resolved the
issue. The part number for the developing assembly is FM2-4872-000.------------------------------------------------------------------------Product : imageRUNNER 7086 / 7095 / 7095 Printer / 7105Title : Intermittent, E025 Error Codes are OccurringProblem :E025 is displayed on the Control Panel. This code refers to the Toner Bottle Rotation Motor M23. The code may or may not be a "Hard" failure. The motor M23 as well as the DC Controller were replaced in an attempt to solve the error code to no avail.
Solution :The Cartridge Motor (MSW8) drive switch was found to be bad. The switch was loading down the voltage to the motor causing it to error out.
MSW8 was replaced to resolve this issue. The part number for the switch is FK2-0384-000.
-----------------------------------------------------------------------------Product : imageRUNNER 7105 / 7095 / 7095 Printer / 7086Title : E110-0000 when machine goes into high speed rotation.Error :E110-0000 when machine goes into high speed rotation. Machine will also lose the 24vdc and 38 vdc at this time . If you go into service mode, machine will go to ready and
you can check motors, clutches and fans but when you exit you will get an E025-0001.
Workaround :Replace the separation fan, M13 . Part number is FH6-1942-020. Found that if we ohmed the blue and red wire going to motor it was aprox 15 ohms a good one should read aproximatley 6k OHMS--------------------------------------------------------------------------Product : imageRUNNER 7086/7095/7105Title : E500-0099Error :The machine intermittently will code out to an E500-0099. Sometimes this happens when the machine is powered on, and sometimes it happens while copying/printing.
Workaround :Try reseating all ARC net components such as cables, terminators, and T-connectors. If the code still occurs, try replacing these components next. If still no solution, replace the ARC net pcbs in the end, part# FM2-4358-000.----------------------------------------------------------------------Product : imageRUNNER 7105 / 7095 / 7086Finisher-V1 / Saddle Finisher-V2Title : E500 Error Code And Suspended MessageError :The imageRUNNER will display either an E500 error code or a message of "suspended" on the panel. The problem had been occurring intermittently, about once per week.
An E500 error code indicates a communication failure with the Finisher. The system software had been flashed, and the cabling was verified as good.
Workaround :The solution to the intermittent E500 codes, was to simply reseat the EEPROM on the Finisher Controller. After reseating the EEPROM, the E500 error code, and the "suspended" message did not return.-------------------------------------------------------------------------Product : imageRUNNER 7105 / 7095 / 7095 Printer / 7086Finisher V1 / V2Perfect Binder A1
Title : Error code E505 0001Problem :Unable to clear E505 0001 error code.
Solution :E505 0001 is used by both the Finisher V1 / V2 and the Perfect Binder A1. First Identify the error code if it is for the Finisher or the Perfect Binder A1, check the 'L" Location column in Service Mode > COPIER > DISPLAY > ERR.
2 = Finisher. Any other value check Perfect Binder A1. Once identified perform the necessary procedures and or parts replacement for the identified Accessory.
Description of Code- Finisher error code"E505-0001": A fault exits in the data stored in the EEPROM on the Finisher Controller PCB.- Perfect Binder error code "E505-0001": The value written to EEPROM and the value read from it do not match.-----------------------------------------------------------------------------------Product : imageRUNNER 7086 / 7095 / 7105Title : E602-0013 Error CodeError :E602-0013
Workaround :To resolve this issue, please install system software version 78.02b V2 or higher.
---------------------------------------------------------Product : imageRUNNER 7086 / 7095 / 7095 Printer / 7105Title : E602-0413Error :E602-0413
Workaround :When the E602-0413 error occurs try to perform the Hard Drive Clears on each partition.
To perform the HD Clears go into service mode COPIER>FUNCTION>SYSTEM
Select CHK-TYPE and set it to 1 and press ok.Then select HD-CLEAR and press ok.
Select CHK-TYPE and set it to 2 and press ok.Then select HD-CLEAR and press ok.
Select CHK-TYPE and set it to 3 and press ok.Then select HD-CLEAR and press ok.
Select CHK-TYPE and set it to 4 and press ok.Then select HD-CLEAR and press ok.
After completing this procedure, power cycle the imageRUNNER and reenter any user settings. If the error still occurs format the Hard Drive with the Service Support Tool and reinstall the System Software.-------------------------------------------------------------Product : imageRUNNER 7105 / 7095 / 7086Title : E732-0010 Only When Using The FeederError :The imageRUNNER is displaying an error code of E732-0010. The code will only appear when using the Document Feeder, copying off the glass will work fine. The problem seems to have occurred after the copier was moved.
The sensor initialization was performed for the feeder, but did not solve the problem. All voltages to the Reader Controller and Interface PCB were present. Connections on the Reader Controller and Main Controller were reseated.
The E732-0010 refers to a fault with the reader sync signal detection mechanism.
Workaround :In this case it was necessary to reseat the communication cables between the Reader Controller and the Interface PCB. Connector J302 and J303 on the Reader Controller and J202 and J205 on the Interface PCB.-----------------------------------------------------------------------------Product : imageRUNNER 7086 / 7105 / 7095 / 7095 PrinterTitle : Error Codes E840, E732 and E110Problem :When the machine is turned on it will display an E840, E732 or E110 error code
Solution :A poor connection at the machine relay board can cause erratic error codes. Unplug and reseat all of the connectors on the relay pcb. Pay close attention to connectors J7101 and J7104.