Transcript
Page 1: C4 Mouldable Plastic Explosive - Military Systems and … ·  · 2017-09-08Counter-IED | C4 Mouldable Plastic Explosive C4 Mouldable Plastic Explosive Description C4 is an RDX based

Counter-IED | C4 Mouldable Plastic Explosive

C4 Mouldable PlasticExplosive Description C4 is an RDX based plastic explosive that ismouldable by hand to form demolition chargesof various shapes and weights for EOD orgeneral demolition tasks.C4 Plastic Explosive is fully compliant with theUN Convention on the Marking of PlasticExplosives for the Purpose of DetectionRegulations (MPER96 amended).C4 is easily cut with a sharp knife or scissorsinto precise shapes to match the charge tothe target.C4 is waterproof and may be usedunderwater if necessary.C4 is easily and reliably initiated by L1A2, orL2A2 detonators, detonating cord L5A1 orDetonating Cord Boosters (DCB). Application - Military and commercial demolitionoperations- Onsite loading of user filled demolitioncharges- General cutting purposes ranging from themost basic to very sophisticated tasks- EOD bomb and mine clearance tasks- Explosive welding and forming

Specifications

RDX: 91% by weight (nominal) Plasticiser/Binder: 9% by weight (nominal) DMNB Taggant: 1.25% by weight

(nominal) Velocity of detonation: 8000m/s (nominal) Density: 1.57g/cm³ C4 is available in thefollowing block sizes 1kg,500g, 250g and 125g andis shipped in a 25kgwooden logistic packcontaining 5off 5kgintermediate packs.

Operating Temp: 40ºC to +63ºC Storage: 5 Years in good

conditions References

Product Codes: C4 Hazard Class: 1.1D UN Number: 0084 Proper Shipping Name: Blasting Explosive, Type D

A Chemring Europe company, part of the Chemring Group.

Chemring Energetics UK Limited Ardeer Site, Stevenston, Ayrshire KA20 3LN Tel: +44 (0)1294 487007 Fax: +44 (0)1294 487230

www.chemringenergetics.co.uk

Chemring Energetics UK Limited Unit 3, Leafield Way, Leafield, Corsham, Wiltshire SN13 9SS Tel: +44 (0)1225 810771 Fax: +44 (0)1225 810614

Content of this Data Sheet is subject to modification without prior notice. It does not constitute a Technical Specification.

Recommended