Building Industry2015 catalogue
Insulated modules 3
Shutter module 8
Sun blind module 10
Blind module 12
Simple module 14
Zelda module, with alarm system 16
Tuttuno module 18
Tuttuno preassembled subframe 20
Roller shutters 25
How to measure 27
Wooden shutters 28
Wood and aluminium shutters 30
Steel safety shutters 31
Aluminium shutters 32
PVC shutters 34
Accessories 36
Components for belt-operated shutters 40
Motors 41
Common features 43
Mercury with mechanical limit switch 44
Atom with electronic limit switch 46
Designer automation 48
Sun blinds 51
Colours 53
C80 54
Z75 56
Z90 58
Accessories 60
Venetian blinds 63
Colours 65
16 66
16 with guide rails 67
25 68
25 with guide rails 69
50 70
50 with guide rails 71
Sales support 73
Insulated modules 74
Motors 75
Roller shutters 76
Sun blinds 78
Venetian blinds 79
Sales Policy 80
CONTENTS
Insulated modules
PRONEMA 4
The benefi ts of home insulation
It is always nice to get back home and enjoy some pleasant, healthy, natural warmth.
As well as increasing the pleasure of living in your home, insulation helps improve indoor
environmental quality (for example, by preventing and removing mould on walls) and allows
for signifi cant annual savings on utility costs and heating bills. In addition, it entitles you to
a number of government incentives and tax benefi ts on home renovation and maintenance.
Besides, insulation not only improves buildings in terms of thermal performance, but
also in terms of noise reduction, making your dwelling even more quiet and peaceful.
✔ Natural, evenly distributed warmth
✔ Savings on heating bills
✔ Tax incentives
✔ Mould removal or prevention
✔ Reduction of heat loss due to thermal bridges
✔ Better sound insulation from outside noise.
Thermal bridges: learning to deal with them
There are discontinuities in any building, i.e. parts of the structure with thermal properties
signifi cantly different from the rest of the envelope. Just think of how different insulation can
be if provided by a window or by a brick wall.
These discontinuities are also known as "thermal bridges”, and their presence has a negative
impact on insulation performance; indeed, they may cause up to a threefold increase in
heat transfer between the inside and outside of buildings, resulting in a considerably higher
heating costs.
In addition to reducing the well-being and comfort of the residents, thermal bridges can
also cause damage to the building itself, encouraging the development of surface
condensation, dust buildup and stains.
INSULATED MODULES
That's why it is so important to avoid the formation of "thermal bridges" during construction.
In the case of renovation, it is good to use thermal imaging to identify the areas of greater
heat loss, so as to take appropriate action.
✔ Reduced durability of materials (exposed to moisture and subject to expansion);
✔ Reduced home living comfort, due to differences between air temperature
and wall temperature;
✔ Formation of lines and stains on walls, due to dust build-up in the colder
regions of the building (themophoresis):
✔ Possible formation of mould (due to surface condensation);
✔ Increased energy consumption. (Between 20% and 30% of
total heat loss).
PRONEMA 5
Home insulation: where to start
There are many and diverse steps to take to improve your home's thermal performance.
It is important to focus on the major causes of heat loss,, and then deal with the minor
ones.
For example, some houses are equipped with a high-effi ciency boiler, only to realise that this
advantage is not preserved with adequate insulation.
Here is a list of the most important actions to be taken and, therefore, the order in which you
should take them.
1) roof insulation;
2) Insulating door and window frames (insulated modules);
3) Using window frames and glass with low "K value";
4) Insulating the building with an external wall insulation system;
5) Using high effi ciency radiators with thermostatic control;
6) Enhanced performance boilers.
Useful concepts to make the right choices
K value: we measure the heat escaping through the walls of our house
Imagine two rooms, separated by a surface (eg, the inside and outside of a house, separated
by a wall). Now also imagine that these two rooms have stable temperatures, differing from
each other by one degree Kelvin. In this case, the“K value”, also known as transmittance,
measures the amount of heat that - in a time interval t - passes through 1m² of wall. That is
why the lower the “K value”, the higher the insulating value.
Thermal conductivity and resistance: what transfers heat and what doesn't
Conductivity (indicated as � - lambda) measures the ability of a material to transfer heat, and
is expressed in W/m2·K. Resistance (designated as R), by contrast, measures how easily heat
fl ows through a specifi c material, and is expressed in m2·K/W. It is very important to take into
account thermal conductivity and resistance values when designing a house, as they make it
possible to fi gure out in advance what the building's thermal performance will be.
A
B
C
D
E
F
G
Heat requirement
per m3
HEAT CONSUMPTION CATEGORIES*
A 30 kWh/m3
B 50 kWh/m3
C 70 kWh/m3
E 120 kWh/m3
F 150 kWh/m3
G 180 kWh/m3
D 90 kWh/m3
* Values published by Agenzia CasaClima - Bolzano - Alto Adige - Italy
PRONEMA 6
Pronema's solution
Pronema's solution to improve your home's thermal and acoustic insulation is to use insulated
modules (or reveals), consisting of two vertical elements and two horizontal elements to be
applied around the edge of window and French window openings. They replace traditional
and ineffi cient frames and subframes and can be installed either in the construction of new
houses or used for renovations.
These insulated modules are designed to ensure that there are no gaps or thermal bridges
between the outer wall and window frames, thereby avoiding any heat loss in winter or poor
heat insulation during the summer. Precisely because window reveals increase the thermal
effi ciency of buildings - reducing energy consumption and environmental impact - you may
benefi t from government incentives to reduce their cost and recover it entirely in just a few
years through the considerable savings you can make on heating and cooling costs. Window
reveals also improve sound insulation inside the house, making it even more comfortable and
quiet.
The effi ciency of Pronema solutions is guaranteed by the materials used: XPS (extruded
polystyrene foam), EPS (expanded polystyrene), fi bre cement and poplar plywood. Combined
together, they create a single, highly compact volume with very low K-value. The window
frame is fi nally applied to the insulated module. As a fi nal fi nishing touch, any gaps between
the window frame and the module and between the module and the wall are fi lled with
polyurethane foam, so as to further increase heat and sound insulation and the resulting
comfort and well-being that users will experience in their house.
The materials used for the production of insulated modules and boxes
Expanded Polystyrene (EPS). Expanded Polystyrene - commonly known as polystyrene
- consists of small beads compressed into sheets. It is obtained by immersing polystyrene
granules into water and adding pentane gas. The compound is then compressed until the
pentane penetrates into the granules, which, after being heated, swell up and take their fi nal
shape.
Because of its hygro-thermal properties, this material is ideal for insulating buildings from
cold, heat, humidity, and ambient noise.
Extruded Polystyrene Foam (XPS). Although solid and non-viscous, it has a porous, foam-
like appearance. It is obtained by immersing polystyrene granules into a special machine,
where they are melted, and into which pressurised gas is blown. This process gives the
material a spongy appearance, while making it fairly light (with a density of 35 kg/m3).
Because of these physical properties, it makes an excellent thermal and acoustic insulation
material, ideal for the construction industry.
Ecological fi bre cement. Versatile and very reliable, this material provides excellent
insulation effi ciency - in terms of both heat and sound - and is therefore used for making
the insulating layers inside reveals. Composed of cement and stabilised organic fi bres, it is
fl exible, crushproof, and non-combustible. It can withstand severe weather conditions and,
being breathable, it helps reduce condensation.
Poplar plywood. A plywood made from wod layers peeled off from the tree trunk. The
crossed orientation of these layers make it possible to alternate the wood's natural grain,
thus obtaining a uniformly resistant material in all directions and at all points. It is used for
making sub-frames, which act as a housing for windows themselves. Poplar wood is the
most suitable type of wood for this purpose, since it has a low transmittance value and is not
particularly sensitive to expansion, deformation, and moisture absorption.
Guides and anchors. Aluminium guides run along the reveal, and are used for fi xing iron
anchors. One anchor is fi xed every 60 cm or so along the height of the reveal, which will then
be walled to support the whole structure. The “guide/anchor” combination gives structural
rigidity to the entire window frame.
PRONEMA 7
The advantages of Pronema's solution at a glance...
...tailor-made solutions
Pronema insulated modules stand out for their uniqueness. They are literally unique, as they
are individually designed and made to measure. There are no standard parts. All components
are designed and manufactured according to the requirements of each customer and the
features of each building. As a result, they can be tailored to any situation.
...materials known for their effi ciency
The materials used for insulating houses are well known. This makes it possible to learn
about their technical specifi cations, to test their effectiveness and know that all the materials
used are safe and feature high effi ciency in terms of engineering and construction.
...guaranteed heat and sound insulation
After each installation, Pronema certifi es the materials used and their insulating properties.
The heat and sound insulation certifi cate defi nes the K-value of each component used to
ensure compliance with the building's energy needs.
Expanded polyurethane foam. It appears as a clear, very fl uffy foam. This synthetic foam
prevents the passage of air and moisture. It is used to fi ll the gaps between the frame and
subframe and thus complete the installation of reveals. This avoids the formation of drafts
and thermal bridges.
Iron cage. Shaped and welded iron elements to increase
structural strength.
PRONEMA 8
1
2
1
2
INSULATED MODULES FOR ROLLER SHUTTERS
INSULATED MODULES FOR ROLLER SHUTTERS
CONSIST OF:
An EPS printed box with internal metal mesh
reinforcement, with wooden or PVC headboards,
rolling shutter tube supports and lower edges
reinforced with aluminium profi les.
Fibre cement closing panel with polystyrene spacer.
XPS side reveal coated with a fi bre cement slab,
poplar plywood reinforcements, which are also
useful to make all arrangements removable,
including shutter guides, insect screen, roller blind,
sun blind and alarm. Aluminium joints for supporting
any mounting brackets and strengthening the reveal,
external aluminium profi les arranged for any type of
fi nish.
Fibre-cement-coated XPS sill insulation, suitable for
glueing any type of sill.
PRONEMA 9
Insulated modules for roller shutters
XPS
LM = fi nished wall thicknessSP = reveal thickness
LV = opening widthHV = opening height
S1 = frame dimensions21 = frame dimensions
250x250 300x250 300x300 350x300 360x300 380x300
Poplar Fibrecement Aluminium EPS Wall Plaster Polyurethanefoam
Self-expanding
tape
Sill
Materials used
Measurements required for preparing a quotation
Boxes available
Standard reveal with window frame fl ush with the interior wall
Reveal with window frame installed at the centre
Example of a reveal arranged for insect screen Front section Side section
Box
PRONEMA 10
1
1
INSULATED MODULES FOR SUN BLINDS
INSULATED MODULES FOR SUN BLINDS
CONSIST OF:
Box made from XPS slabs with internal poplar
plywood reinforcement. Exterior fi bre cement and
aluminium fi nish, designed to support plaster.
XPS side reveal coated with a fi bre cement slab,
poplar plywood reinforcements, which are also
useful to make all arrangements removable,
including shutter guides, insect screen, roller blind,
sun blind and alarm. Aluminium joints for supporting
any mounting brackets and strengthening the reveal,
external aluminium profi les arranged for any type of
fi nish.
Fibre-cement-coated XPS sill insulation, suitable for
glueing any type of sill.
PRONEMA 11
Insulated modules for sun blinds
XPS
LM = fi nished wall thicknessSP = reveal thickness
LV = opening widthHV = opening height
S1 = frame dimensions21 = frame dimensions
Poplar Fibrecement Aluminium EPS Wall Plaster Polyurethanefoam
Self-expanding
tape
Sill
Materials used
Measurements required for preparing a quotation
Boxes available
Standard reveal with window frame fl ush with the interior wall
Reveal with window frame installed at the centre
Example of a reveal arranged for insect screen
Front section Side section
Box
H f
old
ing
Su
nb
lind
s
PRONEMA 12
INSULATED MODULES FOR BLINDS
INSULATED MODULES FOR BLINDS
CONSIST OF:
An XPS upper horizontal and side reveal
coated with fi bre cement plate, poplar plywood
reinforcements,also useful to make all setups
removable, shutter guides, insect screen, roller
blind, sun blind and alarm.
Oversized poplar plywood beam for fi xing blind
hinge, aluminium joints for supporting any mounting
brackets and strengthening the reveal, external
aluminium profi les arranged for any type of fi nish.
Fibre-cement-coated XPS sill insulation, suitable for
glueing any type of sill.
PRONEMA 13
Insulated modules for blinds
FT = fi nished wall thicknessRT = reveal thickness
OW = opening widthOH = opening height
S1 = frame dimensions21 = frame dimensions
Materials used
Measurements required for preparing a quotation
Standard reveal with window frame fl ush with the interior wall
Reveal with window frame installed at the centre
Example of a reveal arranged for insect screen
Front section Side section
XPS Poplar Fibrecement Aluminium EPS Wall Plaster Polyurethanefoam
Self-expanding
tape
Sill
Box
PRONEMA 14
SIMPLE INSULATED MODULES
SIMPLE INSULATED MODULES
CONSIST OF:
An XPS upper horizontal and side reveal
coated with fi bre cement plate, poplar plywood
reinforcements,also useful to make all setups
removable, shutter guides, insect screen, roller
blind, sun blind and alarm.
Aluminium joints for supporting any mounting
brackets and strengthening the reveal, external
aluminium profi les arranged for any type of fi nish.
Fibre-cement-coated XPS sill insulation, suitable for
glueing any type of sill.
PRONEMA 15
Simple insulated modules
LM = fi nished wall thicknessSP = reveal thickness
LV = opening widthHV = opening height
S1 = frame dimensions21 = frame dimensions
Materials used
Measurements required for preparing a quotation
Standard reveal with window frame fl ush with the interior wall
Reveal with window frame installed at the centre
Example of a reveal arranged for insect screen
Front section Side section
XPS Poplar Fibrecement Aluminium EPS Wall Plaster Polyurethanefoam
Self-expanding
tape
Sill
Box
PRONEMA 16
A technology solution that protects your homefrom temperature changes,but also from the bad guys.
Zelda is an insulated module integrating an infrared beam transmitter and receiver which can
detect bodies moving across the opening.
A real security perimeter barrier that can work always, even with your windows open, or
with insect screens or roller shutters raised.
The system consists of three elements: the actual perimeter barrier, a control unit and
a remote control, all networked together. This makes it very easy to configure settings
according to your needs or the features of your home.
Additionally, you may decide to use Zelda alone, or combine it with another existing alarm
system; you may also choose the power source (battery or electrical system) and which
phone numbers to alert in case of burglary.
ZELDA INSULATED MODULE with built-in alarm system
PRONEMA 17
DOOR WINDOW GARDEN
WINDOW
MAINENTRANCE
The Zelda system offers a number of possible combinations. The insulated module
can integrate in a parallel track an insect screen, a shading blind or a shutter,
to protect the room from mosquitoes, insects, dust and sunlight.
You may also with a complete the system blind, a Venetian blind or sun blinds.
There are endless possibilities, tailored for every need, even in the size of an existing window.
One of Pronema's unique patents, Zelda is a smart technology, the result of research
focused on solutions that improve the quality of life.
ZOE insect screen with
anti-pollen net
Shading blind or blackout blind
Roller shutter and insect
screen
Zelda insulated module (with alarm system)
PRONEMA 18
TUTTUNO INSULATED MODULE
THE TUTTUNO INSULATED MODULE
CONSISTS OF:
An insulated module coming in any of the versions
shown in the previous pages (roller shutter,
sun screen, simple blind) with the addition of a
TUTTUNO preassembled subframe.
The sum of these two products dramatically
increases the building's thermal, acoustic and
structural resistance. Suitable for achieving "passive
house" or Class A + requirements.
PRONEMA 19
TUTTUNO insulated module
LM = fi nished wall thicknessSP = reveal thickness
LV = opening widthHV = opening height
S1 = frame dimensions21 = frame dimensions
Materials used
Measurements required for preparing a quotation
Standard reveal with window frame fl ush with the interior wall
Reveal with window frame installed at the centre
Front section Side section
XPS Poplar Fibrecement Aluminium EPS Wall Plaster Polyurethanefoam
Self-expanding
tape
Sill
Box
PRONEMA 20
PATENT PENDING
IS made from the new patented material
FFC, which features unique thermal, acoustic
and structural performance. IS very easy to
assemble with PVC brackets and can be
tightened or shortened as desired like a regular
wooden plank.
Ideal in renovations, it allows to eliminate
the thermal bridge between wall and window
frame.
THE TUTTUNO PREASSEMBLED SUBFRAME
PRONEMA 21
The TUTTUNO preassembled subframe
MATERIAL
FFC (patent pending), self-extinguishing class V0
(std UL94), water absorption 0.8% (48 h at 50°C) (ASTM D570).
Tensile strength
12 N/mm², bending strength 35 N/mm²
Impact strength
20 KJ/sqm at 20°C (18 KJ/sqm at -25°C ) (ISO R 179)
Specifi c weight of the material
0.75 g/cm²
Environmental compatibility
FFC™ is 100% recyclable and made from natural fi bre that uses recycled
material.
Mechanical strength of profi les
120 Kg loaded at 1 mt, 0.8 mm bending
Resistance to wind load
Tested according to EN 12211, frame deviation from subframe at
2,000 Pa (about 200 km/h) of 0.1mm, shock resistance guaranteed up to
3,000 Pa (about 250 km/h)
Water tightness
Tested according to EN 1027, no infi ltration with water fl ow under wind
pressure of 2100Pa (about 210 km/h)
Air permeability
Tested according to EN 1026, air leakage from windows installed in Class
4 according to EN 12207
Heat retention
In a test chamber at a controlled temperature of 0°C outside and 20°C
inside, temperature on Geco 19.7°C; 0.001 W/mK with 20+8 wall and 68
frame
Slots for expansion tapes
Internal (toward the window)
and external (toward external walls).
PRONEMA 22
PRICE LIST (all dimensions in mm, price in €)
H L 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
1200
1400
1600
1800
2000
2200
2400
2600
2800
PRICE LIST (all dimensions in mm, price in €)
H L 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
1200
1400
1600
1800
2000
2200
2400
2600
2800
FRAME 128
FRAME 95
THE TUTTUNO PREASSEMBLED SUBFRAME
PRONEMA 23
95
10
0
20
128
10
0
20
45
20
Profi les and accessories for TUTTUNO preassembled subframes
128PA
Description FFC subframe
(expanded thermopolymer - wood)
Use upper crosspiece and uprights
Shape “L” profl e
Dimensions 128 x 100 x 3400 mm
Expansion tapes slots for 16 mm wide tapes
Installation snap-in mounting at 45 °
with corner joints
Packaging 4 x 3400 mm long rods
95PA
Description FFC subframe
(expanded thermopolymer - wood)
Use upper crosspiece and uprights
Shape “L” profl e
Dimensions 95 x 100 x 3400 mm
Expansion tapes slots for 16 mm wide tapes
Installation snap-in mounting at 45 °
with corner joints
Packaging 4 x 3400 mm long rods
45PL
Description fourth side in FFC
(expanded thermopolymer - wood)
Use lower crosspiece
Shape fl at profi le
Dimensions 45 x 20 x 3400 mm
Expansion tapes slots for 16 mm wide tapes
Installation resting at 90°
with corner joints
Packaging 9 x 3400 mm long rods
Cod. 40SI
Description Mounting bracket to be
positioned on the inner sides of the
profi le, 1 for the upper corner.
Dimensions 40 x 40 x 5 mm
Pack of 200 pcs
Code. 40SL
Description Vertical seam for connecting
multiple profi les in a line
Dimensions 60 x 12 x 5 mm
Pack of 100 pcs
Cod. 40SE
Description Mounting bracket to be
positioned on the outer sides of the
angular profi le, 2 for the upper
corner, 1 one in the lower corners
connected to a 45 PL profi le.
Size 40 x 40 x 5 mm
Pack of 200 pcs
Roller shutters
PRONEMA 26
PRONEMA 27
HOW TO MEASURE
Measuring width with existing galvanised guides Measuring opening width with 30x27 guides
Measuring opening width with galvanised guides Measuring width with 30x19 guides
Measuring width with recessed 30x27 guides Measuring width with protruding elements
OPENING SIZE OPENING SIZE
OPENING SIZE
OPENING SIZEOPENING SIZE
OPENING SIZE
Roll-up panel size:OPENING SIZE + 3 cm
Roll-up panel size:OPENING SIZE - 1,7 cm
Roll-up panel size:OPENING SIZE - 1,5 cm
Roll-up panel size:OPENING SIZE + 2,6 cmRoll-up panel size:
OPENING SIZE -1 cm
Roll-up panel size:OPENING SIZE + 4,2 cm
PRONEMA 28
Suitable guides:
Galvanised 20x17
Aluminium 28x17 - 26x21
Suitable guides:
Galvanised 20x17
Aluminium 28x17 - 26x21
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Code TP16
Swedish pinewood shutters
Slat size 27x10 mm
Weight per sqm 5.0 kg
One metre in height contains 42 slats
Slats locked with hooks
Douglas wood end piece
Price per sqm
(Minimum amount to order 1.75 sqm)
Code TP18
Swedish pinewood shutters
Slat size 35x14 mm
Weight per sqm 9.0 kg
One metre in height contains 32 slats
Slats locked with hooks
Douglas wood end piece
Price per sqm
(Minimum amount to order 1.75 sqm)
Code TP17
Douglas wood shutters
Slat size 27x10 mm
Weight per sqm 5.0 kg
One metre in height contains 42 slats
Slats locked with hooks
Douglas wood end piece
Price per sqm
(Minimum amount to order 1.75 sqm)
Code TP19
Douglas wood shutters
Slat size 35x14 mm
Weight per sqm 9.0 kg
One metre in height contains 32 slats
Slats locked with hooks
Douglas wood end piece
Price per sqm
(Minimum amount to order 1.75 sqm)
WOODEN SHUTTERS
PRONEMA 29
27
2130
19 24
30
21
26
20
20
17
20
2028
17
23
WOODEN SHUTTERS
NOTES
Roller shutters are supplied in raw wood. You
may request different wood fi nishes.
OPTIONS
Extra charge for
anodised guides
Extra charge for painted guides
Extra charge for bronze guides
One dip coat, plus
two coats of clear fi nish
or etched fi nish per sqm
One dip coat,
plus two coats of coloured fi nish
RAL colour per sqm
Roller winding diameter Ø 60 mm
Opening H TP16 TP18 TP20
(cm) TP17 TP19 TP21
100 15 19 20
130 17 21 22
160 19 22 23
190 20 23 24
220 22 24 25
250 24 28 28
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Code TP20
Swedish pinewood shutters
Slat size 48x14 mm
Weight per sqm 8.0 kg
One metre in height contains 24 slats
Slats locked with hooks
Douglas wood end piece
Price per sqm
(Minimum amount to order 1.75 sqm)
Code TP21
Douglas wood shutters
Slat size 48x14 mm
Weight per sqm 8.0 kg
One metre in height contains 24 slats
Slats locked with hooks
Douglas wood end piece
Price per sqm
(Minimum amount to order 1.75 sqm)
Galvanised
guide 20x20
031000.000
Galvanised
guide 20x17
031010.000
Aluminium
guide 30x19
031020.000
Aluminium guide
30x24
031030.000
Aluminium
guide 28x17
031040.000
Aluminium guide
26x21
031050.000
PRONEMA 30
27
2130
19 24
30
20
20
17
20
WOOD AND ALUMINIUM SHUTTERS
NOTES
Roller shutters are supplied in raw wood. YOU
MAY request different wood fi nishes.
OPTIONS
Extra charge for
anodised guides
Extra charge for painted guides
Extra charge for bronze guides
One dip coat, plus
two coats of clear fi nish
or etched fi nish per sqm
One dip coat,
plus two coats of coloured fi nish
RAL colour per sqm
Roller winding diameter Ø 60 mm
Opening H TP23
(cm)
100 20
130 22
160 23
190 24
220 25
250 28
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Code TP23
Douglas wooden shutter coated with
prepainted aluminium sheet on the outside,
0.32 mm thick
Slat size 47x16 mm
Weight per sqm 9.0 kg
One metre in height contains 21 slats
Slats locked with hooks
Aluminium end piece
Price per sqm
(Minimum amount to order 1.75 sqm)
Galvanised
guide 20x20
031000.000
Galvanised
guide 20x17
031010.000
Aluminium
guide 30x19
031020.000
Aluminium guide
30x24
031030.000
PRONEMA 31
27
2130
19 24
30
21
26
20
20
17
20
2028
17
23
STEEL SAFETY SHUTTERS
Suitable guides:
Galvanised 20x17
Aluminium 28x17 - 26x21
Suitable guides:
Galvanised 20x17
Aluminium 28x17 - 26x21
NOTES
To choose colours, please refer to Pronema's
shutter colour chart
Polyurethane is environmentally friendly and
is produced without using Freon or ODP, ie
blowing agents causing ozone layer depletion.
OPTIONS
Extra charge for
anodised guides
Extra charge for painted guides
Extra charge for bronze guides
Extra charge for marbled colour per sqm
Extra charge for wood-effect colour per sqm
Roller winding diameter Ø 60 mm
Opening H TP14 TP15
(cm)
100 13 19
130 15 21
160 17 23
220 19 24
250 20 26
Code TP14, medium density
Prepainted sheet steel shutters,
0.32 mm thick
Slat size 44x9 mm
Slat insulated with medium-density
polyurethane foam (50 kg/m3)
Weight per sqm 9.0 kg
One metre in height contains 23 slats
Slats locked with end caps
Extruded aluminium end piece with slot
for bolts and anti-noise seal
Price per sqm
(Minimum amount to order 1.50 sqm)
Code TP15, high density
Prepainted sheet steel shutters,
0.32 mm thick
Slat size 55x13 mm
Slats insulated with medium-density
polyurethane foam (50 kg/m3)
Weight per sqm 9.0 kg
One metre in height contains 18 slats
Slats locked with end caps
Extruded aluminium end piece with slot
for bolts and anti-noise seal
Price per sqm
(Minimum amount to order 1.50 sqm)
Galvanised
guide 20x20
031000.000
Galvanised
guide 20x17
031010.000
Aluminium
guide 30x19
031020.000
Aluminium guide
30x24
031030.000
Aluminium
guide 28x17
031040.000
Aluminium guide
26x21
031050.000
PRONEMA 32
ALUMINIUM SHUTTERS
Code TP22, medium density
0.30-mm-thick prepainted aluminium sheet
shutter
Slat size 39x8 mm
Slats insulated with medium-density
polyurethane foam (50 kg/m3)
Weight per sqm 3.0 kg
One metre in height contains 26 slats
Slats locked with end caps
Price per sqm
Extruded aluminium end piece with slot for
bolts and anti-noise seal
Price per lm
(Minimum amount to order 1.50 sqm)
Code TP10, medium density
0.32-mm-thick prepainted aluminium sheet
shutter
Slat size 44x9 mm
Slat insulated with medium-density
polyurethane foam (50 kg/m3)
Weight per sqm 3.0 kg
One metre in height contains 23 slats
Slats locked with end caps
Extruded aluminium end piece with slot for
bolts and anti-noise seal
Price per sqm
(Minimum amount to order 1.50 sqm)
Code TP11, high density
0.32-mm-thick prepainted aluminium sheet
shutter
Slat size 44x9 mm
Slat insulated with high-density
polyurethane foam (290 kg/m3)
Weight per sqm 3.0 kg
One metre in height contains 26 slats
Slats locked with end caps
Extruded aluminium end piece with slot for
bolts and anti-noise seal
Price per sqm
(Minimum amount to order 1.50 sqm)
Suitable guides: Galvanised 20x17
Aluminium 28x17 - 26x21
Suitable guides:
Galvanised 20x17
Aluminium 28x17 - 26x21
Suitable guides:
Galvanised 20x17
Aluminium 28x17 - 26x21
PRONEMA 33
27
2130
19 24
30
21
26
20
20
17
20
2028
17
23
ALUMINIUM SHUTTERS
Code TP12 medium density
0.32-mm-thick prepainted aluminium sheet
shutter
Slat size 55x13 mm
Slats insulated with medium-density
polyurethane foam (50 kg/m3)
Weight per sqm 3.7 kg
One metre in height contains 18 slats
Slats locked with end caps
Extruded aluminium end piece with slot for
bolts and anti-noise seal
Price per sqm
(Minimum amount to order 1.50 sqm)
Code TP15, high density
0.32-mm-thick prepainted aluminium sheet
shutter
Slat size 55x13mm
Slat insulated with high-density
polyurethane foam (290 kg/m3)
Weight per sqm 3.7 kg
One metre in height contains 18 slats
Slats locked with end caps
Extruded aluminium end piece with slot for
bolts and anti-noise seal
Price per sqm
(Minimum amount to order 1.50 sqm)
NOTES
To choose colours, please refer to Pronema's
shutter colour chart
Polyurethane is environmentally friendly and
is produced without using Freon or ODP, ie
blowing agents causing ozone layer depletion.
OPTIONS
Extra charge for
anodised guides
Extra charge for painted guides
Extra charge for bronze guides
Extra charge for marbled colour per sqm
Extra charge for wood-effect colour per sqm
Roller winding diameter Ø 60 mm
Opening H TP22 TP10 TP11 TP12 TP13
(cm)
100 12.5 13 13 19 19
130 13.5 15 15 21 21
160 14.5 17 17 22 22
190 15.5 18 18 23 23
220 16 19 19 24 24
250 17.5 20 20 26 26
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Galvanised
guide 20x20
031000.000
Galvanised
guide 20x17
031010.000
Aluminium
guide 30x19
031020.000
Aluminium guide
30x24
031030.000
Aluminium
guide 28x17
031040.000
Aluminium guide
26x21
031050.000
PRONEMA 34
PVC SHUTTERS
Code TP01
1-mm-thick extruded PVC shutter with 4
internal ribs
Slat size 55x14 mm
Weight per sqm 4.5 kg
One metre in height contains 18 slats
Slats locked with side stud
PVC end piece in the same colour
Max width 2,400 mm
Price per sqm
(Minimum amount to order 1.50 sqm)
Code TP03
1.2-mm-thick extruded PVC shutter with 4
internal ribs
Slat size 50x14 mm
Weight per sqm 6.0 kg
One metre in height contains 20 slats
Slats locked with side stud
PVC end piece in the same colour
Max width 2,400 mm
Price per sqm
(Minimum amount to order 1.50 sqm)
Code TP04
1-mm-thick extruded PVC shutter with 3
internal ribs
Slat size 48x14 mm
Weight per sqm 6.0 kg
One metre in height contains 21 slats
Slats locked with side stud
PVC end piece in the same colour
Max width 2,400 mm
Price per sqm
(Minimum amount to order 1.50 sqm)
Code TP02
1-mm-thick extruded PVC shutter with 4
internal ribs
Slat size 50x14 mm
Weight per sqm 5.0 kg
One metre in height contains 20 slats
Slats locked with side stud
PVC end piece in the same colour
Max width 2,400 mm
Price per sqm
(Minimum amount to order 1.50 sqm)
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
PRONEMA 35
20
20
17
20
27
2130
19 24
30
21
26
2028
17
23
PVC SHUTTERS
Code TP05
Extruded PVC shutter with hooks,
1 mm thick, with 2 internal ribs
Slat size 30x27 mm
Weight per sqm 5.0 kg
One metre in height contains 23 slats
Slats locked with hooks
PVC end piece in the same colour
Max width 2,400 mm
Price per sqm
(Minimum amount to order 1.50 sqm)
Code TP06
1-mm-thick extruded PVC shutter with 1
internal rib
Slat size 27x9 mm
Weight per sqm 5.5 kg
One metre in height contains 37 slats
Slats locked with hooks
Max width 2,400 mm
Price per sqm
Extruded aluminium end piece with slot for
bolts and anti-noise seal
Price per lm
(Minimum amount to order 1.50 sqm)
NOTES
To choose colours, please refer to Pronema's shutter colour chart.
Colours 6, 13, 19, 20, 22, 24 and 25 not never guaranteed against discolouration and
deformation; a reinforcement strap is required for these colours.
Because of the special processing involved, the grain of wood-effect colours 14, 16, 18, 25,
26 and 28 may differ from the samples provided in the colour chart.
Due to the peculiarity of the processed material, we cannot accept any complaint concerning
changes in weight.
Shutters measuring more than 2 metres in width are not guaranteed.
A reinforcement strap is required for shutters of more than 1.4 metres in width.
OPTIONS
Extra charge for anodised guides
Extra charge for painted guides
Extra charge for bronze guides
Reinforcement strap per sqm
TP06 reinforcement strap per sqm
Extra charge for end valance reinforcement in shutters wider than 2 metres.
Roller winding diameter Ø 60 mm
Opening H TP01 TP02 TP03 TP04 TP06
(cm) TP05
100 15 14 14 20 15
130 17 17 17 22 17
160 18 19 19 23 19
190 20 20 20 24 20
220 21 22 22 25 22
250 23 24 24 28 24
Suitable guides:
Galvanised 20x20
Aluminium 30x19 - 30x24
Suitable guides:
Galvanised 20x17
Aluminium 28x17 - 26x21
Price per sqm
Price per lm
Galvanised
guide 20x20
031000.000
Galvanised
guide 20x17
031010.000
Aluminium
guide 30x19
031020.000
Aluminium guide
30x24
031030.000
Aluminium guide
28x17
031040.000
Aluminium guide
26x21
031050.000
PRONEMA 36
58
56
71
Accessories
Protruding frame with side lever
Frame for aluminium shutter Profi le size
30x24 mm
Maximum width 1400 mm
Standard colours:
Anodised silver
Anodised bronze
Brown 8017
Ivory 1013
White 9010
Green 6005
Black electrocoating
Price each
Protruding frame with central lever
Frame for aluminium shutter Profi le size
30x24 mm
Maximum width 1400 mm
Standard colours:
Anodised silver
Anodised bronze
Brown 8017
Ivory 1013
White 9010
Green 6005
Black electrocoating
Price each
Standard
protruding
frame scheme
Roma model protruding
frame with special ledge. For
this model, please specify the
Lb clear opening measurement.
Roma model
protruding frame scheme
For this model, please specify
La and Lb clear opening
measurements.
PRONEMA 37
46
B
14
2
16
519
5
Code 096000
Regular winder with steel plate
Code 096020
Universal winder with steel plate
Code 096160
Standard box
Code 096180
Sheet metal pulley for Ø60 sheet metal
rollers
Code 096190
Sheet metal or PVC pulley
with through hole for Ø60 sheet metal rollers
Code 096240.000
PVC canopy for Ø60 sheet metal rollers
Code 096200
PVC pulley for Ø60 sheet metal rollers
Code Belt take-up
096000.000 4.0 mt
096000.001 6.0 mt
096000.002 7.5 mt
096000.003 11.0 mt
Code Belt take-up
096020.000 4.0 mt
096020.001 6.0 mt
096020.002 10.0 mt
096020.003 12.0 mt
Code Capacity
096160.000 6.0 mt
096160.001 11,0 mt
Code
096240.000
Code
096180.000 Ø18
096180.001 Ø24
Code
096190.000 Ø18
096190.001 Ø24
Code
096200.000 Ø18
096200.001 Ø24
Ø18 -
Ø24
Ø18 -
Ø24
Ø18 -
Ø24
57
Code 096250.000
Sheet metal canopy
for Ø60 sheet metal rollers
Code
096250.000
45
Accessories
58
A 11
4
12
8
13
5
16
4
B
58 B
14
21
57
16
5
20
6A
23
2
18
4
PRONEMA 38
Accessories
Code 096310.000
Reducer bearing
Code 096260.000
External adjustable sheet metal canopy
for Ø60 sheet metal rollers
Code 096270.000
Internal adjustable octagonal canopy
for Ø60 sheet metal rollers
Code 096280.000
Telescopic canopy
Code 094570.000
8/10 octagonal roller
Code 096290.000
12/10 octagonal roller
Code 096300.000
Bearing with anchor
Code
096310.000
Code
096260.000
Code
096270.000
Code
096280.000
Code
094570.000
Code
096290.000
Code
096300.000
78
3011
Ø12
Ø12
200
20
20 70
350/500
11
Ø60
120120
60 70
PRONEMA 39
Code 096350
Stopper
40
Code Colour
096350.002 White
096350.028 Grey
096350.201 Brown
096350.200 Brick Red
096350.098 Black
096350.800 Wood
096350.500 Green
Code 096360.000
Vertical galvanised iron belt guide
Code
096360.000
45
25
Code 096400.000
Pair of galvanised iron bolts
for aluminium end piece
Code 096410.000
Pair of middle
galvanised iron bolts
Code 096420.000
Plastic Securblock
Code 096430
50-m roller-operating belt
Code
096400.000
096400.001 for PVC shutters
Code
096410.000
Code
096420.000 1 pair
Code Width
096430.000 14
096430.001 20
096430.002 22
Accessories
PRONEMA 40
Winder
Code 096000
Code 096020
Box
Code 096160
Belt
Code 096430
Bearing
Code 096300
Pulley
Code 096180
Code 096190
Code 096200
Roller
Code 094570
Code 096290
Stopper
Code 096350
Canopy
Code 096240
Code 096250
Code 096260
Code 096270
Code 096280
Guide
Code 031000
Code 031010
Code 031020
Code 031030
Code 031040
Code 031050
Belt guide
Code 096360
Components for belt-operated shutters
Motors
PRONEMA 43PRONEMA 43
Key
MERCURY ATOM
Power supply 230/50 V/Hz 230/50 V/Hz
Quiescent current - < 1 W
Minimum roller diameter 50x1.5 mm 50x1.5 mm
Operation time 4 min. 4 min.
Degree of protection 44 IP 44 IP
Working frequency - 433.42 Mhz
Channel memory - max 15
Max limit switch revs 22 ∞Insulation class H H
Multifunction: One motor for roller shutters, awnings, insect screens
Dual mode command: Arranged for manual and radio control
Compliant sensor radio; Integrated compatibility
FOD: Fail obstacle detection
SHD: Safety hooks detection
ROD: Rise obstacle detection
ARS: Automatic run setting
ARR: Automatic run restore
OLS: Optimal limit switches
MPP: My preferred position
Wireless reset: Reset from transmitter
SSA: Single switch adjustment
(possibility to change the position of even only one limit switch)
D
S
(
Motors - Common features
PRONEMA 44PRONEMA 44
3 mt
MERCURY - MOTOR WITH MECHANICAL LIMIT SWITCH
Motor with mechanical limit switch
FEATURES
50-mm tubular motor
Mechanical limit switch
Power 8 to 60 Nm
Rpm 8 to 14 rpm
OPTIONS
Additional 10x10 mm square pin
NOTES
The motor is operated by a switch (not included)
Item No. Power Max weight
(Nm/rpm) (kg)
095570 8/14 12
095580 12/14 18
094110 22/14 33
093820 32/14 48
093830 42/14 63
093840 50/11 75
095590 60/8 90
Available in stock On request
TEST CABLE
Keypad for programming motors, suitable for both
motors with mechanical limit switches and motors
with electronic limit switches
Code 096820.000
PRONEMA 45PRONEMA 45
60 x 1
70 x 1,1
70 x 1
1
60x1
70x1.1
70x1
78x1
Accessories for mechanical motor
SQUARE PIN
10x10 mm square pin for
mechanical motor
AWNING/SUN BLIND SUPPORT
Omega support with 10x10 mm
square hole
SPIN
Wind control system for 1
mechanical motor with
optional remote control
70 ADAPTER WITH GROOVE
Pair of adapter and driver for 70
roller with groove
SIRIO
Sun and wind control system for 1
mechanical motor with
optional remote control
OCTAGONAL 60 ADAPTER
Pair of adapter and driver for
octagonal 60 roller
BLAST
Wind control system for multiple
mechanical motors with external
radio receiver (Rolly MIR)
78 ADAPTER WITH GROOVE
Torque adapter and driver for 78
roller with groove
ARCO 1
1-channel transmitter
with additional function
433.42 MHz frequency
VEGA
Sun and wind control system for
multiple mechanical motors with
external radio receiver (Rolly MIR)
OCTAGONAL 70 ADAPTER
Pair of adapter and driver for
octagonal 70 roller
MIR
External radio receiver module
for using the remote control
on 1 mechanical motor
BLAST BATTERY
Battery-operated wind control system
for multiple mechanical motors with
external radio receiver (Rolly MIR)
SUPPORT FOR SHUTTERS
Support with star-shaped hole and
M10 pin for pre-existing walls
ARCO 5
5-channel transmitter
with sequencer
433.42 MHz frequency
VEGA BATTERY
Battery-operated sun and wind control
system for multiple mechanical motors
with external radio receiver (Rolly MIR)
Code 094090.000 Code 094100.000 Code 095800.000
Code 094320.000 Code 095830.000
Code 094340.000 Code 095810.000
Code 094330.000 Code 095760.000 Code 095840.000
Code 095700.000
Code 095790.000
Code 095820.000
Code 095730.000 Code 095770.000 Code 095850.000
BEARING
Universal bearing
BEARING FOR ROLLER
SHUTTERS
Adjustable bearing with M10 pin for
pre-existing walls
Item No. 095740.000
Code 095750.000Battery life: 5 years
Battery life: 5 years
PRONEMA 46PRONEMA 46
3 mt
ATOM - MOTOR WITH ELECTRONIC LIMIT SWITCH AND INTEGRATED RADIO
Motor with electronic limit switch and integrated radio
FEATURES
50-mm tubular motor
Electronic limit switch
Radio frequency 433.42 MHz
Power 8 to 60 Nm
Rpm 8 to 14 rpm
OPTIONS
Additional 10x10 mm square pin
NOTES
Can be operated either via a remote control
or switch (not included)
Obstacle detection, automatic limit switches and their
restoration will only work if there are suitable radio
motor adapters.
Code Power Max weight
(Nm/rpm) (kg)
095600 8/14 12
095610 12/14 18
095620 22/14 33
095630 32/14 48
096540 42/14 63
095650 50/11 75
095660 60/8 90
Available in stock On request
TEST CABLE
Keypad for programming motors, suitable for both
motors with mechanical limit switches and motors
with electronic limit switches
Code 096820.000
PRONEMA 47PRONEMA 47
Accessories for electronic motor with integrated radio
SQUARE PIN
10x10 mm square pin for electronic
motor
AWNING/SUN BLIND SUPPORT
Omega support with 10x10 mm
square hole
BEARING
Universal bearing
BEARING FOR ROLLER
SHUTTERS
Adjustable bearing with M10 pin for
pre-existing walls
70 RADIO MOTOR ADAPTER WITH
GROOVE FOR DROP-DOWN AWNINGS
Radio motor adapter and driver for 70
roller with groove
OCTAGONAL 60 RADIO MOTOR
ADAPTER
Radio motor adapter and driver for
octagonal 60 roller
BLAST
Wind control system for multiple
mechanical motors with external
radio receiver (Rolly MIR)
78 RADIO MOTOR ADAPTER WITH
GROOVE FOR DROP-DOWN AWNINGS
Radio motor adapter and driver for 78 roller
with groove
70 RADIO MOTOR ADAPTER WITH
GROOVE FOR AWNINGS
Pair of adapter and driver
78 RADIO MOTOR ADAPTER WITH
GROOVE FOR AWNINGS
Pair of adapter and driver
ARCO 1
1-channel transmitter
with additional function
433.42 MHz frequency
VEGA
Sun and wind control system for
multiple mechanical motors with
external radio receiver (Rolly MIR)
OCTAGONAL 70 RADIO MOTOR
ADAPTER
Radio motor adapter and driver for
octagonal 70 roller
BLAST BATTERY
Battery-operated wind control system
for multiple mechanical motors with
external radio receiver (Rolly MIR)
SUPPORT FOR SHUTTERS
Support with star-shaped hole and
M10 pin for pre-existing walls
ARCO 5
5-channel transmitter
with sequencer
433.42 MHz frequency
VEGA BATTERY
Battery-operated sun and wind control
system for multiple mechanical motors
with external radio receiver (Rolly MIR)
Code 094080.000
Code 094700.000
Code 095740.000
Code 095750.000
Code 095710.000
Code 094350.000
Code 095810.000
Code 095720.000
Code 094030.000 RHS
Code 094040.000 LHS
Code 094050.000 RHS
Code 094060.000 LHS Code 095760.000
Code 095840.000
Code 095700.000
Code 095820.000
Code 095730.000
Code 095770.000
Code 095850.000
Battery life: 5 years
Battery life: 5 years
60x1
70x1.1
70x1
78x1
70x1
78x1
PRONEMA 48PRONEMA 48
Code
Kilion
DESIGNER AUTOMATION - KILION - KUADRO - FLUTE
KilionA touch-screen device, ideal as a single support for managing
shutters, awnings, insect screens, blinds, skylights, irrigation
systems, garage doors, pergolas, lighting equipment and much
more.
It works at a frequency of 433.42 MHz and is powered by mains
voltage. Kilion controls up to 40 radio channels, 8 groups, 8 timers.
It is simple and intuitive, both during installation and use. Also
offers the option to engage or disengage the sun control function.
Supports 5 languages - Italian, English, French, German and Spanish -
and can be installed in three different ways, with recessed, outdoor
or tabletop versions. Dimensions: 140x150x80 mm.
Comfort all around usPronema has always been committed to using high-quality components
for making its product, so as to ensure their durability.
With the same principle, the company has selected quality motor control devices,
which are easy to use and make life more comfortable.
And also very beautiful, as a stylish expression of Italian design.
PRONEMA 49
Designed by Mario Mazzer, Flute received
prestigious international awards:
- Good Design Award 2012
- iF Design Award 2014
- Redott Award 2014.
KuadroFeaturing a minimal, sleek design, the Kuadro radio transmitter has
three LED-backlit operation buttons: up, stop and down.
Also offers the option to engage or disengage the sun function.
It works at a frequency of 433.42 MHz and can drive either a motor
with electronic limit switch and integrated radio, or a motor with
mechanical limit switch and power unit.
AVAILABLE in standard colours - white, grey and black - or in any
other colour on request. IT CAN be wall mounted with a magnetic
support or used as a transportable transmitter. Battery powered.
Dimensions: 80x80x13 mm.
FluteFinished with a special soft touch paint,
the Flute remote control is smooth and
pleasant to the touch. Available in standard
colours - white, grey and black - or in any
other colour on request.
Flute (1 channel) works at a frequency of
433.42 MHz. Features three operation
buttons, plus a small button for selecting
the channel. Offers the possibility to control
1 to 5 devices with a possible general
channel that groups them all.
ALLOWS for engaging or disengaging
the sun function and is supplied with a
magnetic support. Ensures long battery life.
Code
Kuadro black
Kuadro grey
Kuadro white
Code
Flute black
Flute grey
Flute white
Sun blinds
PRONEMA 53
Metallic Grey
White
Anthracite Grey
Pistachio Green
Champagne
Grey
Metallic Grey
White
010
013
042
011
025
028
010
013
SLAT COLOURS
GUIDE AND BOTTOM SLAT COLOURS
Colour sample
Colour sample
Code
Code
Colour
Colour
Brown
Dark Grey
Warm Grey
Antique Blue
Red
Burgundy
Anthracite Grey
Brown
066
090
008
004
007
032
042
066
Colour sample
Colour sample
Code Colour
Electric Blue
Green
Graphite Grey
Matte Antique Grey
Dark Brown
Perforated Metallic Grey
Dark Grey
079
087
041
043
051
039
090
Colour sample
Colour sample
Code
Code
Colour
Colour
The colours shown are for illustrative purposes only; please refer to the sun blind colour chart.
Non-standard colours are available at an extra charge specifi ed under the options, plus a surcharge of € 150.00, excluding VAT, for stock management costs.
Transportation costs are € 100.00, excluding VAT, for all products.
Standard guide and bottom slat colours in stock. Other colours available upon request.
PRONEMA 54
1
1
C80 SUN BLINDS
Sun blind with vertical guides and winch
or motor mechanism
FEATURES
80-mm aluminium slats
0.40 mm thick, painted, with closing and
anti-noise seals
Sliding rollers in the guide, alternating
on both sides
18x24 mm guides with
anti-noise seals
COLOURS AVAILABLE
standard:
010 Metallic Grey
013 White
042 Anthracite Grey
090 Dark Grey
with extra charge for SP-2:
025 Champagne
028 Grey
066 Brown
008 Warm Grey
041 Graphite Grey
051 Dark Brown
with extra charge for SP-3:
011 Pistachio Green
004 Antique Blue
007 Red
032 Burgundy
079 Electric Blue
087 Green
043 Matte Antique Grey
with extra charge for SP-4:
039 Perforated Metallic Grey
Standard bracket for front application
18x24 guide
Anti-noiseSeal
Anti-noiseseal
PRONEMA 55
C80
Width 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400 FoldingHeight height
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
450
6 Nm motor 9 Nm motor
PRICE LIST (all dimensions in cm, price in €)
OPTIONS
Winch to the left
Removable winch pole
Extra charge for SP2 colour
Extra charge for SP3 colour
Extra charge for SP4 colour
Stock management * (net price)
* NOTES
Add extra charge and stock management costs to the price of
colours SP2, SP3 and SP4
AUTOMATION
6 Nm motor - motor with mechanical limit switch
9 Nm motor - motor with mechanical limit switch
Arco 1 - 1-channel transmitter with additional function
Arco 5 - 5-channel transmitter with sequencer
SLY - Control unit module with
built-in radio in airtight container
with pre-wired cable, for motors
with mechanical limit switches
Code 096810.000
15
18
20
23
25
30
35
PRONEMA 56
Z75 SUN BLINDS
Sun blind with vertical guides and winch or
motor mechanism
FEATURES
75-mm aluminium slats
0.40 mm thick, painted, with closing and anti-
noise seals
Sliding rollers in the guide, alternating
on both sides
18x24 mm guides with
anti-noise seals
COLOURS AVAILABLE
standard:
010 Metallic Grey
013 White
042 Anthracite Grey
090 Dark Grey
with extra charge for SP-2:
025 Champagne
028 Grey
066 Brown
008 Warm Grey
041 Graphite Grey
051 Dark Brown
with extra charge for SP-3:
011 Pistachio Green
004 Antique Blue
007 Red
032 Burgundy
079 Electric Blue
087 Green
043 Matte Antique Grey
with extra charge for SP-4:
039 Perforated Metallic Grey
18x24 guide
1
Standard bracket for front application
1Anti-noiseSeal
Anti-noiseseal
PRONEMA 57
Z75
Width 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400 FoldingHeight height
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
450
6 Nm motor 9 Nm motor
PRICE LIST (all dimensions in cm, price in €)
OPTIONS
Winch to the left
Removable winch pole
Extra charge for SP2 colour
Extra charge for SP3 colour
Extra charge for SP4 colour
Stock management * (net price)
* NOTES
Add extra charge and stock management costs to the price of
colours SP2, SP3 and SP4
AUTOMATION
6 Nm motor - motor with mechanical limit switch
9 Nm motor - motor with mechanical limit switch
Arco 1 - 1-channel transmitter with additional function
Arco 5 - 5-channel transmitter with sequencer
SLY - Control unit module with
built-in radio in airtight container
with pre-wired cable, for motors
with mechanical limit switches
Code 096810.000
15
18
20
23
25
30
35
40
PRONEMA 58
Z90 SUN BLINDS
Sun blind with vertical guides and winch or
motor mechanism
FEATURES
90-mm aluminium slats
0.40 mm thick, painted, with closing and anti-
noise seals
Sliding rollers in the guide, alternating
on both sides
18x24 mm guides with
anti-noise seal
COLOURS AVAILABLE
standard:
010 Metallic Grey
013 White
042 Anthracite Grey
090 Dark Grey
with extra charge for SP-2:
025 Champagne
028 Grey
066 Brown
with extra charge for SP-3:
011 Pistachio Green
008 Warm Grey
004 Antique Blue
007 Red
032 Burgundy
079 Electric Blue
087 Green
041 Graphite Grey
043 Matte Antique Grey
051 Dark Brown
with extra charge for SP-4:
039 Perforated Metallic Grey
1
1
18x24 guide
Standard bracket for front application
Anti-noiseSeal
Closingseal
PRONEMA 59
Z90
Width 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400 FoldingHeight height
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
450
6 Nm motor 9 Nm motor
PRICE LIST (all dimensions in cm, price in €)
OPTIONS
Winch to the left
Removable winch pole
Extra charge for SP2 colour
Extra charge for SP3 colour
Extra charge for SP4 colour
Stock management * (net price)
* NOTES
Add extra charge and stock management costs to the price of
colours SP2, SP3 and SP4
AUTOMATION
6 Nm motor - motor with mechanical limit switch
9 Nm motor - motor with mechanical limit switch
Arco 1 - 1-channel transmitter with additional function
Arco 5 - 5-channel transmitter with sequencer
SLY - Control unit module with
built-in radio in airtight container
with pre-wired cable, for motors
with mechanical limit switches
Code 096810.000
15
18
20
23
25
30
35
40
PRONEMA 60
ACCESSORIES
Code 095920.000
1.00-mm-thick aluminium partition
with 30-mm lip
Code 0095930.000
1.00-mm-thick aluminium partition
with 120-mm lip
Colour Height
Grey 150 mm
Grey 200 mm
Grey 250 mm
White 150 mm
White 200 mm
White 250 mm
Colour Height
Grey 150 mm
Grey 200 mm
Grey 250 mm
White 150 mm
White 200 mm
White 250 mm
Code 095960.000
A2 bracket for front application
Code 095970.000
A3 bracket for front application,
adjustable from 44 to 64 mm
Code 095980.000
A4 bracket for front application,
adjustable from 55 to 78 mm
Code 095990.000
A5 bracket for front application
Venetian blinds
PRONEMA 65
COLOURS
The colours shown are for illustrative purposes only; please refer to the Venetian blind colour chart.
P 1
P 2
P 3
P 4
P 507
P 8
P 11
P 14
P 130
P 0044
P 141
P 7
P 2002
P 1010
P 57
P 139
P 35
P 16
P 56
P 59
P 258
glossy
matte
glossy
glossy
matte
matte
matte
matte
matte
glossy
matte
matte
matte
matte
glossy
matte
glossy
glossy
matte
matte
matte
matte
matte
matte
matte
matte
matte
matte
matte
metallic
metallic
metallic
metallic
metallic
glossy
matte
matte
matte
matte
glossy
glossy
glossy
glossy
glossy
glossy
glossy
glossy
metallic
glossy
glossy
glossy
glossy
glossy
glossy
glossy
glossy
glossy
glossy
glossy
glossy
P 36
P 136
P 20
P 92
P 103
P 40
P 199
P 19
P 15
P 86
P 83
P 38
Perf. 0058
Perf. 61
Perf. 2
Perf. 707
P 603
P 606
Colour sample Colour sample Colour sampleCode Code Code 16 16 25 25 50 Colour Colour ColourFinish Finish Finish
available not available
S 1
S 7
S 23
S 22
S 11
S 41
S 30
S 13
S 14
S 6
S 20
S 17
S 4
S 32
S 26
S 12
S 16
S 9
S 8
S 10
S 19
PRONEMA 66
1
1
16 VENETIAN BLINDS
Venetian blind with 16-mm slats
FEATURES
27 x 20 mm painted sheet metal box
16 mm painted sheet metal slats
21 x 13 mm painted sheet metal bottom slat
White Terylene strings
Terylene operating cords on the right
Transparent PVC tilt adjustment rod
on the left
Upper or front mounting
Wall and ceiling mounting bracket
OPTIONS (no extra charge)
Operating cords on the left
Tilt adjustment rod on the right
Operating cords and adjustment rod on
the same side
Clip for glazing bead application
NOTES
Maximum width 3,000 mm,
recommended width 2,700 mm
Maximum height 2,800 mm,
recommended height 2,500 mm
Full Venetian blind colour to be chosen
from colour chart
With a width of less than 260 mm, cord
and rod cannot be combined together
on the same side
PRICE LIST
Width 400 mm to 3,000 mm per sqm
Width of less than 400 mm
Width of less than 260 mm
(Minimum amount to order 1.5 sqm)
PRONEMA 67
1
1
16 VENETIAN BLINDS WITH GUIDES
Venetian blind with 16-mm slats and guides
FEATURES
27 x 20 mm painted sheet metal box
16 mm painted sheet metal slats
21 x 13 mm painted sheet metal bottom slat
White Terylene strings
Terylene operating cords on the right
Transparent PVC tilt adjustment rod on the left
Transparent PVC guides
Upper or front mounting
OPTIONS (no extra charge)
Operating cords on the left
Tilt adjustment rod on the right
Operating cords and adjustment rod on
the same side
Clip for glazing bead application
NOTES
Maximum width 3,000 mm,
recommended width 2,700 mm
Maximum height 2,800 mm,
recommended height 2,500 mm
Full Venetian blind colour to be chosen
from colour chart
With a width of less than 260 mm, cord
and rod cannot be combined together
on the same side
PRICE LIST
Width 400 mm to 3,000 mm per sqm
Width of less than 400 mm
Width of less than 260 mm
Side guides
(Minimum amount to order 1.5 sqm)
PRONEMA 68
1
1
25 VENETIAN BLINDS
Venetian blind with 25-mm slats
FEATURES
27 x 20 mm painted sheet metal box
25 mm painted sheet metal slats
21 x 13 mm painted sheet metal bottom slat
White Terylene strings
Terylene operating cords on the right
Transparent PVC tilt adjustment rod
on the left
Upper or front mounting
OPTIONS (no extra charge)
Operating cords on the left
Tilt adjustment rod on the right
Operating cords and adjustment rod on
the same side
Clip for glazing bead application
NOTES
Maximum width 3,000 mm,
recommended width 2,700 mm
Maximum height 3,000 mm,
recommended height 2,800 mm
Full Venetian blind colour to be chosen
from colour chart
With a width of less than 260 mm, cord
and rod cannot be combined together
on the same side
PRICE LIST
Width 400 mm to 3,000 mm per sqm
Standard colour slat
Antique effect slat per sqm
Perforated slat per sqm
Width of less than 400 mm
Width of less than 260 mm
(Minimum amount to order 1.5 sqm)
Glazing bead mounting bracket
PRONEMA 69
1
1
25 VENETIAN BLINDS WITH GUIDES
Venetian blind with 25-mm slats and guides
FEATURES
27 x 20 mm painted sheet metal box
25 mm painted sheet metal slats
21 x 13 mm painted sheet metal bottom slat
White Terylene strings
Terylene operating cords on the right
Transparent PVC tilt adjustment rod on the left
Transparent PVC guides
Upper or front mounting
OPTIONS (no extra charge)
Operating cords on the left
Tilt adjustment rod on the right
Operating cords and adjustment rod on
the same side
Clip for glazing bead application
NOTES
Maximum width 3,000 mm,
recommended width 2,700 mm
Maximum height 3,000 mm,
recommended height 2,800 mm
Full Venetian blind colour to be chosen
from colour chart
With a width of less than 260 mm, cord
and rod cannot be combined together
on the same side
PRICE LIST
Width 400 mm to 3,000 mm per sqm
Standard colour slat
Antique effect slat per sqm
Perforated slat per sqm
Width of less than 400 mm
Width of less than 260 mm
Side guides
(Minimum amount to order 1.5 sqm)
PRONEMA 70
1-Option with side casing
2
1
2-Option with Terylene strings
50 VENETIAN BLINDS
Venetian blind with 50-mm slats
FEATURES
52 x 54 mm painted sheet metal box
50 mm painted sheet metal slats
50 x 19 mm painted sheet metal bottom slat
PVC tape to match the Venetian blind
Terylene operating cords on the right
Terylene tilt adjustment cords on the left
Upper mounting
OPTIONS (no extra charge)
Operating cords on the left
Tilt adjustment cords on the right
Operating cords and adjustment rod on
the same side
White Terylene strings instead of PVC
tape
Installation with side casing
NOTES
Maximum width 4,000 mm,
recommended width 3,500 mm
Maximum height 3,800 mm,
recommended height 3,500 mm
Full Venetian blind colour to be chosen
from colour chart
PRICE LIST
Width 500 mm to 3.000 mm per sqm
Width 300 mm to 500 mm per sqm
(Minimum amount to order 1.5 sqm)
PRONEMA 71
1
1
OPTIONS (no extra charge)
Operating cords on the left
Tilt adjustment cords on the right
Operating cords and adjustment rod on
the same side
White Terylene strings instead of PVC
tape
Installation with side casing
NOTES
Maximum width 4,000 mm,
recommended width 3,500 mm
Maximum height 3,800 mm,
recommended height 3,500 mm
Full Venetian blind colour to be chosen
from colour chart
50 VENETIAN BLINDS WITH GUIDES
Venetian blind with 50-mm slats and guides
FEATURES
52 x 54 mm painted sheet metal box
50 mm painted sheet metal slats
50 x 19 mm painted sheet metal bottom slat
PVC tape to match the Venetian blind
Terylene operating cords on the right
Terylene tilt adjustment cords on the left
Transparent PVC guides
Upper or front mounting
PRICE LIST
Width 500 mm to 3,000 mm per sqm
Width 300 mm to 500 mm per sqm
Side guides per lm
Pelmet per lm
(Minimum amount to order 1.5 sqm)
Sales support
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
model sill insulation exterior fi nishoptions (roller shutter, motor, sun blind, alarmed guides)
arrangement forinsect screen your ref.
type ofpanel
yes no external
plaster insulation
external
plaster insulation
external
plaster insulation
external
plaster insulation
external
plaster insulation
external
plaster insulation
external
plaster insulation
external
plaster insulation
external
plaster insulation
external
plaster insulation
external
plaster insulation
yes no
yes no yes no
yes no yes no
yes no yes no
yes no yes no
yes no yes no
yes no yes no
yes no yes no
yes no yes no
yes no yes no
yes no yes no
LVopening width
HVopening height
LMwall thickness
S1window
S2window
NB: Please provide measurements taken from the inside Fax: 0322 50 50 40
order quotation
insulated modules
order reference
fi lled out by
date
stamp
notes
7.4
.1.1
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.4
.1.1
2
standard
delivery
express
delivery
code codemodel modelno. no.option optionyour ref. your ref.
NB: Please provide measurements taken from the inside Fax: 0322 50 50 40
order quotation
motors
order reference
fi lled out by
date
stamp
notes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
standard
delivery
express
delivery
Code model no.
width
fi nished
height
fi nished colour options your ref.
7.4
.1.1
1
NB: Measurements should be taken from the inside Fax: 0322 50 50 40
order quotation
blinds
order reference
fi lled out by
date
stamp
notes
Winder
Code 096000 - pc no.:
Code 096020 - pc no.:
Box
Code 096160 - pc no.:
Belt
Code 096430 - pc no.:
Bearing
Code 096300 - pc no.:
Pulley
Code 096180 - pc no.:
Code 096190 - pc no.:
Code 096200 - pc no.:
Roller
Code 094570 - pc no.:
Code 096290 - pc no.:
Stopper
Code 096350 - pc no.:
Canopy
Code 096240 - pc no.:
Code 096250 - pc no.:
Code 096260 - pc no.:
Code 096270 - pc no.:
Code 096280 - pc no.:
Guide
Code 031000 - pc no.:
Code 031010 - pc no.:
Code 031020 - pc no.:
Code 031030 - pc no.:
Code 031040 - pc no.:
Code 031050 - pc no.:
Belt guide
Code 096360 - pc no.:
Components for belt-operated shutters
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
code model no. width height
size
opening height panel w. winch motorslatcolour
guidecolour options your ref.
NB: Please provide measurements taken from the inside
Fax: 0322 50 50 40
order quotation
sun blinds
order reference
fi lled out by
date
stamp
notes
rightleft
rightleft
rightleft
rightleft
rightleft
rightleft
rightleft
rightleft
rightleft
rightleft
rightleft
7.4
.1.1
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
size control tilt adj.
opening right rightfi nished left left
standard
delivery
express
delivery
model
slat width
16 25 50no. width height colour options your ref.
NB: Please provide measurements taken from the inside Fax: 0322 50 50 40
stamp
notes
7.4
.1.1
4
order quotation
Venetian blinds
order reference
fi lled out by
date
PRONEMA 80
CATALOGUES
This catalogue and price list cancels and replaces the
previous version as from 01/01/2015 and is the only
one recognised as valid and effective by Pronema S.r.l..
All dimensions in the catalogue are in millimetres or
centimetres. Every indication, drawing or picture of the
products in Pronema S.r.l. catalogues and/or price lists is
for indicative purposes only and is not binding, and may
be changed without notice at any time. NO part of these
catalogues or price lists may be reproduced without the
prior written permission of Pronema S.r.l..
PROFILE TOLERANCES
Dimensional tolerances are typical of machined aluminium
and/or steel products and depend on the machinery we
use. For this reason, differences within a range of +/- 3mm
should be considered compliant.
ORDERS
Orders are understood as a reservation of products and
do not bind Pronema S.r.l. to deliver all or part the order.
Any order implies full acceptance of our sales conditions.
As our goods are made to measure, cancellations will
not be accepted where the goods have already been
manufactured. Orders must be placed exclusively by fi lling
out our forms, indicating the product code as specifi ed
in the catalogue; only the details provided in the order
confi rmation will be binding for Pronema S.r.l.
PRICES
All prices in this price list are in Euro and are net of VAT and
any other tax. The price shown in the order confi rmation is
ex our warehouse in Comignago. According to fl uctuations
in raw material prices, the end price shall be that indicated
in the order confi rmation; because of this, we may vary the
conditions specifi ed herein without prior notice. Any import
taxes, customs duties, and other taxes relating to the
country of destination will be fully borne by the buyer. Any
statements, promises and guarantees from persons who
do not offi cially represent the company (employees, sales
representatives, agents and business agent) and differing
from the terms contained herein, are not in any way binding
for Pronema S.r.l..
SHIPMENTS
All products are shipped freight collect, unless otherwise
agreed. The goods are shipped at the buyer's own risk,
even if sold carriage paid, and Pronema is released from all
liability in case of accidents or incidents. The recipient must
check the goods on arrival and notify any damage to the
carrier, even when the goods are delivered carriage free. For
production reasons, the goods ordered may be delivered on
a different date and with different lots.
PACKAGING
Standard packaging is free of charge, while special
packaging will be chrged extra at cost.
DELIVERY
Pronema S.r.l. agrees to comply with the terms of delivery
specifi ed in the order confi rmation. The causes which
prevent or delay the shipment of materials such as, by way of
example but not limited to, delayed supplies of raw materials,
import bans, strikes (including company strikes) and other
causes which prevent or delay their production and/or
processing, are considered as force majeure events and in
such cases Pronema S.r.l. cannot be held responsible for
delays in deliveries. In the above cases, Pronema S.r.l. may
delay deliveries until after the causes of the delay have been
removed. Once the delivery by courier has been accepted,
the goods are considered delivered.
PAYMENTS
The amounts shown on the invoices cannot be rounded.
Bank charges are paid by the buyer. Although accepted
by Pronema S.r.l., checks or bills will be considered as a
payment only once they have been successfully cashed.
If the customer defaults on a payment, default interest will
be automatically charged to the extent provided by Italian
Legislative Decree 231/2002, without the need for a letter of
formal notice. A default of more than sixty days will constitute
a major breach, and will result in the termination, without the
need for prior notice, of any supplies or current contracts,
although not related to the payments concerned, subject
to compensation for damages. In the event of an extended
payment, failure to comply with a single deadline, in addition
to the aforementioned consequences, will automatically
result in forfeiture of the agreement, making the entire
outstanding amount immediately due.
WARRANTY
Pronema S.r.l. guarantees that the products sold have
been carefully checked and tested where required, and
they are in any case covered by warranty according
to the law, from the date of delivery specifi ed in the
accompanying document. The warranty covers all
original defects in materials and workmanship and is
limited to defects occurring when the product is properly
used for its intended purpose. THIS warranty does
not include damage caused by improper installation,
misuse, alteration or unauthorised modifi cations to the
components and any other tampering. This warranty
does not cover damage to surfaces caused by use of
abrasives or acids or by failure to clean and/or lack of
maintenance. It cannot be guaranteed that there will
be no differences between colour baths and different
prints. In terms of correspondence between colours, our
“aluminium colour chart” for profi les, our “technical fabrics
chart” for technical fabrics, and our “swatch” samples for
soft fabrics shall prevail. For each claim, the product must
be accompanied by the relevant document.
CLAIMS
The buyer must check the goods immediately on receipt
and make sure there is no damage. Under penalty of
cancellation of the warranty, any claims related to non-
compliance and defects must be notifi ed by registered
letter within eight days of receiving the goods, and
the allegedly defective product(s) shall be returned to
Pronema S.r.l. to allow the company to undertake any
appropriate inspections. If, as a result of such inspections,
the alleged defect was confi rmed to exist, Pronema S.r.l.
will replace the defective goods free of charge, provided
that they are returned ex warehouse. We will not accept
claims on products and/or fabrics which have been
modifi ed or cut.
RETURNS
Pronema S.r.l. will not accept any returned goods unless
previously authorised in writing and with our company's
authorisation number, and in any case only where the
goods have been shipped freight prepaid. Goods returned
for repair will be accepted only if perfectly cleaned, washed
and complete with all information required to carry out the
repair.
LIABILITY
Pronema S.r.l. shall not be liable for any damage to
persons, animals or property arising from non-compliance
with safety requirements, or improper installation, and/or
installation without carrying out the appropriate checks.
APPLICABLE LAW - JURISDICTION
Any dispute will be resolved under the Italian law. The court
of Novara and its branch offi ce in Borgomanero shall have
exclusive jurisdiction over any disputes.
RETENTION OF TITLE
The seller shall retain title to all goods delivered until
payment has been received in full.
GENERAL CONDITIONS OF SALE
This publication is printed on chlorine-free paper. Its size
and layout are designed to reduce paper waste.
Artwork: Julita Atelier (www.julita.it)
Print completed in December 2014
PRONEMA s.r.l.
11, Via Circonvallazione
28060 Comignago (NO)
Italy
Tel. +39 0322 505050
+39 0322 060249
Fax: +39 0322 505040
+39 0322 060252
E-mail: [email protected]
www.fb.com/pronema.italia
Website: www.pronema.it
Art
wo
rk:
Julit
a A
telie
r (w
ww
.julit
a.it)
01
15