www.bendtechgroup.com.au
Bending & Rolling
SPECIALISTS
PG 2 / BEND-TECH / ENGINEERED TOUGH
Our 200NB x 12mm wall, pipe bender makes us one of the largest, low cost and efficient benders in Australia“ “
Over 30 years of market leading bending, rolling and fabrication
Leaders in precision, low tolerance bending and rolling
Extensive expertise, high-performance machinery and equipment
We pride ourselves on continually improving service and delivery
The industry benchmark for safe, certified and compliant solutions
www.bendtechgroup.com.au / PG 3
Our extensive experience
in bending and rolling has
resulted in completed projects
for heat transfer, slurry lines, sub-
sea power transfer and high-pressure
fluid conveyance. Our 200 NB x 12mm
wall pipe bender now makes us one of
the largest, low cost and efficient pipe
benders in Australia.
Our leading bending and rolling capabilities
have enabled us to successfully deliver
projects from many industries and for
many different applications for decades.
Our market leading expertise and high-
performance equipment provides the
quality and precision necessary to
complete complex projects. We pride
ourselves on the level of service, quality,
safety and compliance outcomes we are
able to provide for our clients.
PG 4 / BEND-TECH / ENGINEERED TOUGH
Our extensive bending capabilities and state of the art CNC
machinery ensure we execute a wide range of shapes and sizes.
We can bend round, square, rectangular, oval or specially-shaped
tube or pipe.
mandrelbending
Schedule Pipe Size
Size Section Outside Ø Tightest CLR
20 SCH 10-160 26.7 60mm
25 SCH 10-160 33.4 50mm
32 SCH 10-160 42.2 73mm
40 SCH 10-160 48.3 90mm
50 SCH 10-160 60.3 125mm
65 SCH 10-160 73 182mm
80 SCH 10-160 88.9 178mm
90 SCH 40-160 101.6 203mm
100 SCH 40-160 114.3 254mm
125 SCH 40-160 141.3 250mm
150 SCH 40-160 168.3 305mm
200 SCH 40-80 219.1 640mm
Square Hollow Section (SHS)
SHS Wall Thickness Tightest CLR
20 x 20 1.6 70mm
25 x 25 1.6, 2, 2.5, 3 75mm
30 x 30 1.6, 2, 2.5, 3 90mm
40 x 40 2, 2.5, 3, 4 120mm
50 x 50 2.5, 3, 4, 5 182mm
65 x 35 3, 4, 5, 6 182mm
Tube – Aluminium ‘Bending Grade’
Not all Aluminium tubing is bending grade, so ensure the tubing
is bend gradeable such as T-52 and alike to avoid damage.
Size Wall Thickness Tightest CLR
19 3.2 28mm
25 3 50mm
32 3 48mm
38.1 3.25, 4.5 57mm
48 4 90mm
50 4 100mm
60 6 125mm
76 6 152mm
100 6 203mm
114 6.35 304mm
160 10 500mm
219 12 640mm
Tube – Stainless Steel
Size Wall Thickness Tightest CLR
19 1.6 28mm
22.2 1.6, 2 39mm
25.4 1.6, 2 50mm
31.8 1.6, 2 48mm
38.1 1.6 57mm
50.8 1.6 100mm
63.5 1.6 105mm
76.1 1.6, 2 152mm
Tube – Electric Resistance Welded (ERW)
Size Wall Thickness Tightest CLR
19 1.6 28mm
22.2 1.6, 2 39mm
25.4 1.6, 2 31mm
31.8 1.6, 2 48mm
38.1 1.6 53mm
50.8 1.6 100mm
63.5 1.6 105mm
76.1 1.6, 2 152mm
Measurements are in millimeters.
CLR means ‘Center Line Radius’
www.bendtechgroup.com.au / PG 5
Low tolerance, precision bending specialists“ “
High Pressure Sub-Sea
Energy Transfer Lines
- Precision bending completed
by our experienced team
PG 6 / BEND-TECH / ENGINEERED TOUGH
We can roll standard structural shapes such as pipe, angle, flat, channel,
UB’s and UC’s, as well as a broad range of aluminium extrusions. We are
market leaders rolling spirals, cones, ellipses, and any number of more
complex geometric shapes.
sectionrolling
Schedule Pipe Size
Size Section Outside Ø Tightest CLR
20 SCH 10-160 26.7 100mm
25 SCH 10-160 33.4 150mm
32 SCH 10-160 42.2 200mm
40 SCH 10-160 48.3 250mm
50 SCH 10-160 60.3 300mm
65 SCH 10-160 73 350mm
80 SCH 10-160 88.9 400mm
90 SCH 40-80 101.6 500mm
100 SCH 40-80 114.3 600mm
125 SCH 40-80 141.3 750mm
Tube – Electric Resistance Welded (ERW)
Size Wall Thickness Tightest CLR
19 1.6 100mm
22.2 1.6, 2 100mm
25.4 1.6, 2 100mm
31.8 1.6, 2 150mm
38.1 1.6 200mm
50.8 1.6 300mm
63.5 1.6 500mm
76.1 1.6, 2 650mm
101 1.6, 2 750mm
Tube – Aluminium ‘Bending Grade’
Not all Aluminium tubing is bending grade, so ensure the tubing
is bendable grade such as T-52 and alike to avoid damage.
Size Wall Thickness Tightest CLR
19 3.2 100mm
25 3 100mm
32 3 150mm
38.1 3.25, 4.5 200mm
48 4 300mm
50 4 300mm
60 6 500mm
76 6 650mm
100 6 800mm
Measurements are in millimeters.
CLR means ‘Center Line Radius’
Tube – Stainless Steel
Size Wall Thickness Tightest CLR
19 1.6 100mm
22.2 1.6, 2 100mm
25.4 1.6, 2 100mm
31.8 1.6, 2 150mm
38.1 1.6 200mm
50.8 1.6 300mm
63.5 1.6 500mm
76.1 1.6, 2 650mm
101 1.6, 2 750mm
Square Hollow Section (SHS)
SHS Wall Thickness Tightest CLR
20 x 20 1.6 100mm
25 x 25 1.6, 2, 2.5, 3 125mm
30 x 30 1.6, 2, 2.5, 3 150mm
35 x 35 1.6, 2, 2.5, 3 200mm
40 x 40 1.6, 2, 2.5, 3, 4 250mm
50 x 50 2, 2.5, 3, 4, 5 300mm
65 x 65 3, 4, 5, 6 350mm
75 x 75 3, 4, 5, 6 400mm
89 x 89 5, 6 450mm
100 x 100 5, 6, 9 500mm
125 x 125 5, 6, 9 600mm
www.bendtechgroup.com.au / PG 7
Rectangular Hollow Section (RHS) Flat
RHS has two variations, on its edge (the largest surface) and
on the flat (the narrow surface).
RHS Wall Thickness Tightest CLR Flat
76 x 38 1.6, 2 2000mm
50 x 25 2, 2.5, 3 300mm
65 x 35 3, 4 400mm
75 x 50 3, 4, 5, 6 450mm
100 x 50 4, 5, 6, 9 800mm
125 x 75 4, 5, 6 1200mm
150 x 50 4, 5 2000mm
150 x 100 4, 5, 6, 9 3000mm
Rectangular Hollow Section (RHS) Edge
RHS has two variations, on its edge (the largest surface) and
on the flat (the narrow surface).
RHS Wall Thickness Tightest CLR Edge
76 x 38 1.6, 2 1000mm
50 x 25 2, 2.5, 3 250mm
65 x 35 3, 4 350mm
75 x 50 3, 4, 5, 6 400mm
100 x 50 4, 5, 6, 9 650mm
125 x 75 4, 5, 6 1000mm
150 x 50 4, 5 1500mm
150 x 100 4, 5, 6, 9 2500mm
Flat Bar – Flat
Flat Bar has two variations, on its edge (the largest surface)
and on the flat (the narrow surface).
RHS Bar Thickness Tightest CLR Flat
20 3, 5 150mm
25 3, 5, 6, 8, 10, 12 150mm
32 3, 5, 6, 8 150mm
40 3, 5, 6, 8, 10, 12, 16 150mm
50 3, 5, 6, 8, 10, 12, 16 150mm
65 5, 6, 8, 10, 12, 16 150mm
75 5, 6, 8, 10, 12, 16 150mm
90 6, 8, 10, 12 150mm
100 5, 6, 8, 10, 12, 16 150mm
110 8, 10, 12, 16 150mm
130 10, 12, 16 150mm
150 10, 12, 16 150mm
180 10, 12, 16 150mm
200 10, 12, 16 150mm
Flat Bar – Edge
Flat Bar has two variations, on its edge (the largest surface)
and on the flat (the narrow surface).
RHS Bar Thickness Tightest CLR Edge
20 3, 5 200mm
25 3, 5, 6, 8, 10, 12 200mm
32 3, 5, 6, 8 200mm
40 3, 5, 6, 8, 10, 12, 16 200mm
50 3, 5, 6, 8, 10, 12, 16 200mm
65 5, 6, 8, 10, 12, 16 250mm
75 5, 6, 8, 10, 12, 16 300mm
90 6, 8, 10, 12 400mm
100 5, 6, 8, 10, 12, 16 500mm
110 8, 10, 12, 16 600mm
130 10, 12, 16 900mm
150 10, 12, 16 10000mm
PG 8 / BEND-TECH / ENGINEERED TOUGH
Angle Bar – Toe In
Angle Bar has two variations, Toe In (the indent inside the bar)
and Toe Out (the indent outside the bar).
Angle Thickness Tightest CLR T/IN
25 x 25 3, 5 200
30 x 30 3, 5, 6, 8, 10, 12 200
40 x 40 3, 5, 6 250
50 x 50 3, 5, 6, 8 300
65 x 65 5, 6, 8, 10 400
75 x 50 5, 6, 8 300
75 x 75 8, 10 500
90 x 90 8, 10 600
100 x 75 8, 10 500
100 x 100 8, 10, 12 750
125 x 75 10 500
Angle Bar – Toe Out
Angle Bar has two variations, Toe In (the indent inside the bar)
and Toe Out (the indent outside the bar).
Angle Thickness Tightest CLR T/Out
25 x 25 3, 5 75
30 x 30 3, 5, 6, 8, 10, 12 100
40 x 40 3, 5, 6 150
50 x 50 3, 5, 6, 8 200
65 x 65 5, 6, 8, 10 400
75 x 50 5, 6, 8 200
75 x 75 8, 10 400
90 x 90 8, 10 500
100 x 75 8, 10 400
100 x 100 8, 10, 12 600
125 x 75 10 400
125 x 125 10, 12 750
Universal Beams / Columns Flat
Universal Beams has two variations, on its edge (the largest
surface) and on the flat (the narrow surface).
UB / UC Tightest CLR Flat
150UB14 1000
150UB18 1000
180UB16.1 2000
180UB18.1 2000
180UC14.8 1500
150UC23.4 2000
150UC30 2000
150UC37.2 2000
Universal Beams / Columns Edge
Universal Beams has two variations, on its edge (the largest
surface) and on the flat (the narrow surface).
UB / UC Tightest CLR Edge
150UB14 3000
150UB18 3000
Measurements are in millimeters.
CLR means ‘Center Line Radius’
section rolling
www.bendtechgroup.com.au / PG 9
Parallel Flange Channel (P.F.C) – Toe In
P.F.C have two variations, Toe In (the indent inside the bar) and
Toe Out (the indent outside the bar).
Channel PFC Tightest CLR T/IN
75 x 40 200
100 x 50 300
125 x 65 500
150 x 75 1000
180 x 75 1200
200 x 75 1500
Parallel Flange Channel (P.F.C) – Toe Out
P.F.C have two variations, Toe In (the indent inside the bar) and
Toe Out (the indent outside the bar).
Channel PFC Tightest CLR T/Out
75 x 40 200
100 x 50 300
125 x 65 400
150 x 75 600
180 x 75 1200
200 x 75 1500
PG 10 / BEND-TECH / ENGINEERED TOUGH
Our reputation and high performance, quality
workmanship has enabled us to undertake bending
and rolling projects from across all industries
and applications. Our clients know we have
the experience and machinery to handle
their project.
e.d.
f.
a.
www.bendtechgroup.com.au / PG 11
a. 200NB Bends for Slurry Pipework
Completed in-house on our 200NB pipe bender, ready
for despatch for underground coal mining
b. Duplex S/S High Pressure Gas Coils
Preparation and bending completed in house ready for
delivery and installation for gas detection on a large Oil &
Gas project in Australia
c. Optus Stadium Bus Station - Roof Structure
Precision rolling completed by our experienced team for
the Optus stadium bus station
d. Heat Exchanger Tube Bundles
We cut and bent the whole project ready for installation to
refurbish a super-heater, heat exchanger unit
e. 50mm DIA Polished Stainless Steel
Bending completed by our experienced team, ready for
installation as handrails
f. High Corrosive Liquids Coil Unit
Precision bending in the hands of our experienced team
c.b.
PG 12 / BEND-TECH / ENGINEERED TOUGH
PERTH 08 9459 8600
SYDNEY 02 9764 6607
BRISBANE 07 3117 3780
KALGOORLIE 08 9021 8300
NEWMAN 08 9175 1164
MOUNT ISA 07 4743 6458
www.bendtechgroup.com.au
Global industry leaders in mining, engineering and fabrication solution innovation and development
“ “
about us We deliver sustained value by providing
cutting-edge solutions through collaboration
and innovation. For more than 30 years
we have delivered intelligent design and
custom-certified products and services to the Mining, Fabrication, Marine, and Oil and Gas
industries across Australia and around the
world. We have achieved this through a deep
understanding of our customers and their
requirements as well as innovative and industry
leading design, engineering and construction.