8/8/2019 Backhow of TIL
http://slidepdf.com/reader/full/backhow-of-til 1/4
Engine Gross Power 56 kW / 75 hp
Engine Flywheel Power 54 kW / 72 hp
Operating weight 7960 kg
Backhoe digging depth 4854 mm
8/8/2019 Backhow of TIL
http://slidepdf.com/reader/full/backhow-of-til 2/4
Engine
Simpson S440 naturally aspirated,direct injection, four cylinderdiesel engine.
Ratings at 2200rpm
kW hp
Gross Power 56 75
Net Power 54 72
Dimensions
Bore 100 mm
Stroke 127 mm
Displacement 4.0
liters
Hydraulic System
Load-sensing, close-centersystem
Variable-flow, closed-center,load-sensing system provides full
hydraulic force to cutting edgesat all engine speeds. Provides
low fuel consumption and loweffort controls.
Type Closed-
centerPump type Variable flow
axial-position
Pump capacity 139 lpm
Systempressure
207 bar
Steering
Full hydrostatic steeringcontrolled by a hand metering
unit.
Type front wheel
Power steering Hydrostatic
Cylinder, one(1) double-acting
Bore 70mm
Stroke 224mm
Rod diameter 45mm
Turning circle
Outside frontwheels
8.1m
Outside widest
loader bucket
10.8m
BrakesFully enclosed, hydraulic, multiple
discs.
Features
Inboard oil-immersed,
hydraulically actuated multiplediscs on final drive input shaft.
Completely enclosed andsealed.
Self adjusting.
Foot-operated brake pedals
can be interlocked for roading. Parking /secondary brakes are
independent of service brake
system. Parking brake ismechanically applied through
a hand lever located in theright side console.
TransmissionCaterpillar power-Shuttle transmission
The standard power-Shuttle transmission provides four speed forwand reverse, full synchromesh in all gears. Constant mesh gears on
ratios permit on-the-go shifting of all gears, up or down. Natural stprovision prevents starting while shuttle is engaged. Torque conver
free-wheel clutch allows the converter stator to free-wheel during hspeed, low-load conditions, such as roading
Torque converterSingle stage, 2.63 : 1 stall ratio
Travel speeds(when equipped with 16.9 × 28 rear tires)
Forward Reverse
1st 5.8 km/h 1st 5.8 km/h
2nd 9.3 km/h 2nd 9.3 km/h
3rd 19.3 km/h 3rd 19.3 km/h
4th 32.4km/h 4th 32.4 km/h
8/8/2019 Backhow of TIL
http://slidepdf.com/reader/full/backhow-of-til 3/4
Axles
Standard two-wheel drive
Features
Heavy-duty rear axle withself-adjusting inboard brakes
and final drives.
Pendulum mounted front axle
features permanently sealedand lubricated provide pin,
double acting steering cylinder
with 500 steering angle forincreased maneuverability.
Oscillation 110 each directionfrom centerline.
Service Refill
CapacitiesLiters
Cooling system 24.8 Fuel tank 128.0 Engine with oil
filter 10.0
Transmission 19.0 Real Axle 18.0
Includes planetary
Hydraulic
system
71.0
Hydraulic tank 38.0
Buckets
LoaderGeneralpurpose
1.0 m3
Backhoe (Digger)
Standard duty 0.23 m3
Width 762 mm
Capacity(SAE) 233 liter
TiresStandard:Front Tubed, 9×16 – 16 pr Rear Tubed, 16.9 ×28 – 12 pr
Optional :Rear(Heavy duty) Tubed, 14×25 – 20 pr
Weights
Standard single tilt loader with 1.0m3 general purpose loader bucket
0.23 m3 backhoe bucket, 80 kgoperator and a full fuel tank.
Standard 7960kg
Loader Bucket Dimensions and PerformanceSingle- Tilt load
Capacity(SAE rated) genareal purpose (Basi
Width 1.0 m
Lift capacity at maximum height 2396 m
8/8/2019 Backhow of TIL
http://slidepdf.com/reader/full/backhow-of-til 4/4
Breakout force 2416
G Maximum hinge pin height 38.9 k
H Dump angle at full height 3321 m
Dump height at maximum angle 4
I Dump reach at maximum angle 2633 m
J Maximum bucket rollback at ground leve 794 mK Digging depth 4
Maximum grading angle 78 m
Width of dozer cutting edge
L Grill to bucket cutting edge, carry position 1520 m
M Maximum operating height 4201 m