Automotive measuring equipment.
Measuring equipment designed to examine and de-termine the cause of vibration in the undercarriage of vehicles.
Left or right ? - Front or rear ?
The two acceleration sensors measure influences up to ± 2g on 3 axes (xyz).Very easy to operate: Mount, connect, drive and read results.No buttons, no adjustments, no maintenance.
The robust encapsulation makes the equipment usable in any type of weather.
Developed and produced in Denmark - SVJ-Sensors ApS. - www.svj-sensors.com
NO MORE GUESSINGOR FLIP A COIN
IT’S SO SIMPLE !!!
DATA-LOGGING
Use the build-in USB-port to save measured data to a memory stick. Analyse data using SteViSens® PC software.
Download the PC software at :
www.svj-sensors.com
(+45) 21 65 78 49 www.svj-sensors.com [email protected]
1
2
3
4
1.PLACE
The in-mouldedpower magnets
makes mounting very easy.
If needed, attach them with strips.
3.CONNECT
Route the cables through door ope-
nings. Attach the cablesto SteViSens 62.
2.ATTACHAttach the cables to the suspension with strips. Keep a safe distance to the exhaust and rotating parts.
4.Drive and readoutIn the picture the vibrations are noticea-ble stronger on the left side.
Recommended
