11
Audio/Video ProductionStudio
Camera Operation,
Safety, and Storage
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
2
The Studio Camera
2
High-quality camera is heavy and cannot be properly maneuvered without a camera mount
Used for studio productions Can be used on big remotes Operates as part of a camera
chain Other types of cameras are self
contained, can deliver signal directly to a VTR
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
3
Parts of the Camera Review
3
LensSelects a field of viewProduces a small optical image of this view
Camera Camera body with internal optical systemImaging device (pickup device)
Viewfinder Shows a small video image on a screen of what the lens is seeing
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
4
Operating the Studio Camera
4
Some consider studio camera easier to operate than a portable or camcorder
All electronic adjustments are done for you by a video operator or engineer
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
They operate and control the CCU (camera control unit)
5
Used to communicate with the director and other crew members
Avoid any unnecessary talking on the intercom headset
Intercom Headset
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
6
Carries video and audio signals to and from the CCU
Contains numerous small cables
Camera Cable
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
Do not bend or tightly coil the cable; bending and tight coiling may damage or break small wires in the cable
7
Used to move (tilt, pan, truck, or dolly) the camera
Never let go of the control handles or leave the camera if the pan and tilt locks are unlocked
Control Handles
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
8
Pan and tilt controls should be unlocked anytime the camera is moved
Unlock pan control first, then the tilt controls
This prevents accidental tilting and camera damage
Pan and Tilt Locks
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
9
Usually five or seven inches
Can tilt or turn to the sides
Avoid touching the viewfinder screen
Studio Viewfinder
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
10
Zoom Control Usually located on the right control
handleUsually a rocker lever
Focus Control Usually located on the left control
handleUsually a knob that turns
Avoid touching the lens surface
Zoom and Focus Controls
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
11
Mounted on top of the camera or viewfinder
Indicates the camera that is “on the air”
Be sure it is off before focusing or moving
Tally Light
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.
12
Steps should be completed in order Helps insure safe operation of the camera Reduces injury to camera operator or crew Helps prolong the camera’s life Reduces damage to the camera Refer to the operation manual for your studio
cameras, remote zoom, and focus controls for other precautions and information
Many Steps to Follow
Copyright © Texas Education Agency, 2012. All rights reserved. Images and other multimedia content used with permission.