Convention N° 1968 / Agreement No. 1968
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 1/23
Section Laboratoires
ATTESTATION D’ACCREDITATION
ACCREDITATION CERTIFICATE
N° 1-0533 rév. 8 Le Comité Français d'Accréditation (Cofrac) atteste que : The French Committee for Accreditation (Cofrac) certifies that :
MECASEM N° SIREN : 318355195
Satisfait aux exigences de la norme NF EN ISO/CEI 17025 : 2005 Fulfils the requirements of the standard
et aux règles d’application du Cofrac pour les activités d’analyses/essais en : and Cofrac rules of application for the activities of testing in :
MATERIAUX / MATERIAUX METALLIQUES - MATERIAUX METALLIQUES SOUDE S / BRASES MATERIALS / METALLIC MATERIALS EQUIPEMENTS INDUSTRIELS ET PRODUITS D'INGENIERIE / ENCEINTES CLIMATIQUES - MACHINES D'ESSAIS MECANIQUES - TOUT EQUIPEMENT ET P RODUIT (INDUSTRIEL ET DE CONSOMMATION) SOUMIS A DES ESSAIS EN ENVIRONNEMENT CLIMATIQUE ET MECANIQUE INDUSTRIAL EQUIPMENTS AND ENGINEERING PRODUCTS / CLIMATIC CHAMBERS - MECHANICAL TESTING MACHINES - ALL EQUIPMENT AND PRODUCT (INDUSTRIAL AND CONSUMER) SUBJECT TO ENVIRONMENTAL AND MECHANICAL TESTING
réalisées par / performed by :
MECASEM 90, rue de Lingolsheim 67540 OSTWALD Cedex
et précisément décrites dans l’annexe technique jointe and precisely described in the attached technical appendix L’accréditation suivant la norme internationale homologuée NF EN ISO/CEI 17025 : 2005 est la preuve de la compétence technique du laboratoire dans un domaine d’activités clairement défini et du bon fonctionnement dans ce laboratoire d’un système de management de la qualité adapté (cf. communiqué conjoint ISO/ILAC/IAF de janvier 2009) Accreditation in accordance with the recognised international standard ISO/IEC 17025 : 2005 demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (re. Joint IAF/ILAC/ISO Communiqué dated january 2009). Le Cofrac est signataire de l’accord multilatéral d’EA pour l’accréditation, pour les activités objets de la présente attestation. Cofrac is signatory of the European co-operation for Accreditation (EA) Multilateral Agreement for accreditation for the activities covered by this certificate.
Convention N° 1968 / Agreement No. 1968
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 2/23
Date de prise d’effet / granting date : 01/11/2017 Date de fin de validité / expiry date : 31/10/2022
Pour le Directeur Général et par délégation On behalf of the General Director
Le Responsable du Pôle Physique-Mécanique, The Pole Manager,
Stéphane RICHARD La présente attestation n’est valide qu’accompagnée de l’annexe technique. This certificate is only valid if associated with the technical appendix.
L’accréditation peut être suspendue, modifiée ou retirée à tout moment. Pour une utilisation appropriée, la portée de l’accréditation et sa validité doivent être vérifiées sur le site internet du Cofrac (www.cofrac.fr). The accreditation can be suspended, modified or withdrawn at any time. For a proper use, the scope of accreditation and its validity should be checked on the Cofrac website (www.cofrac.fr).
Cette attestation annule et remplace l’attestation N° 1-0533 Rév 7. This certificate cancels and replaces the certificate N° 1-0533 Rév 7.
Seul le texte en français peut engager la responsabilité du Cofrac. The Cofrac's liability applies only to the french text. Comité Français d’Accréditation - 52, rue Jacques Hillairet - 75012 PARIS
Tél. : 33 (0)1 44 68 82 20 – Fax : 33 (0)1 44 68 82 21 Siret : 397 879 487 00031 www.cofrac.fr
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 3/23
Section Laboratoires
ANNEXE TECHNIQUE
à l’attestation N° 1-0533 rév. 8 L’accréditation concerne les prestations réalisées par : MECASEM 90, rue de Lingolsheim 67540 OSTWALD Cedex Dans ses unités techniques : - Laboratoire Mecasem - Essais Métallurgiques - Laboratoire Mecasem - Vérification des équipement s d'essais
Elle porte sur : voir pages suivantes
TECHNICAL ANNEX
to accreditation certificate No. 1-0533 rev. 8 The accreditation relates to the services provided by: MECASEM 90, rue de Lingolsheim 67540 OSTWALD Cedex In its technical units: - Laboratoire Mecasem - Metallurgical Tests - Laboratoire Mecasem - Test equipment check
This concerns: see following pages
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 4/23
Unité technique : Laboratoire Mecasem - Essais Métallurgiques Portée flexible FLEX1 : Le laboratoire est reconnu compétent pour pratiquer les essais en suivant les méthodes référencées et leurs révisions ultérieures. *Portée FIXE : Le laboratoire est reconnu compétent pour pratiquer les essais en respectant strictement les méthodes mentionnées dans la portée d’accréditation. Les modifications techniques du mode opératoire ne sont pas autorisées. Technical unit: Laboratoire Mecasem - Metallurgical Tests FLEX1 flexible scope: The laboratory is recognised as competent to carry out the tests, in compliance with the referenced methods and their subsequent revisions. *FIXED scope: The laboratory is recognised as competent to carry out the tests, in strict compliance with the methods referred to in the scope of accreditation. Technical modifications to the procedure are not authorised.
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 5/23
MATERIAUX / MATERIAUX METALLIQUES / Essais mécaniqu es (29-1) MATERIALS / METALLIC MATERIALS/ Mechanical tests (29-1)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Matériaux métalliques
Metallic materials
Essai de traction à l’ambiante
Tensile test at ambient temperature
ReH, ReL, Rp, Rm, E, A, Z
NF EN ISO 6892-1 (Méthodes A et B)
NF EN 10002-1 (Norme abrogée)
ASTM E8 et E8M
NF EN 2002-001
DIN 50125
NF E 25-005
NF EN ISO 898-1
ASTM F606
ASTM F606M
NF EN ISO 6892-1 (Methods A and B)
NF EN 10002-1 (Standard withdrawn)
ASTM E8 and E8M
NF EN 2002-001
DIN 50125
NF E 25-005
NF EN ISO 898-1
ASTM F606
ASTM F606M
/
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 6/23
MATERIAUX / MATERIAUX METALLIQUES / Essais mécaniqu es (29-1) MATERIALS / METALLIC MATERIALS/ Mechanical tests (29-1)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Matériaux métalliques
Metallic materials
Essai de traction à chaud
High temperature tensile test ReH, ReL, Rp, Rm, E, A, Z
NF EN ISO 6892-2 (Méthodes A et B)
NF EN 10002-5 (Norme abrogée)
ASTM E21
NF EN 2002-002
NF EN ISO 6892-2 (Methods A and B)
NF EN 10002-5 (Standard withdrawn)
ASTM E21
NF EN 2002-002
Température maxi : 900°C
Max. temperature: 900°C
Matériaux métalliques
Metallic materials
Essai de flexion par choc
Impact test KU, KV (J)
NF EN ISO 148-1
NF EN 10045-1 (Norme abrogée)
ASTM E23
NF EN ISO 148-1
NF EN 10045-1 (Standard withdrawn)
ASTM E23
/
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 7/23
MATERIAUX / MATERIAUX METALLIQUES / Essais mécaniqu es (29-1) MATERIALS / METALLIC MATERIALS/ Mechanical tests (29-1)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Matériaux métalliques
Metallic materials
Essai de dureté Rockwell
Rockwell hardness test
Dureté HRC, HRB
Hardness HRC, HRB
NF EN ISO 6508-1
ASTM E18 /
Matériaux métalliques
Metallic materials
Essai de dureté Brinell
Brinell hardness test
Dureté HBW
Hardness HBW
NF EN ISO 6506-1
ASTM E10 /
Matériaux métalliques
Metallic materials
Essai de dureté Vickers
Vickers hardness test
Dureté Vickers
Vickers hardness
NF EN ISO 6507-1
ASTM E92 /
Matériaux métalliques
Metallic materials
Essai de dureté Vickers sous charge réduite
Low load Vickers hardness test
Dureté Vickers
Vickers hardness
NF EN ISO 6507-1
ASTM E92
ASTM E384
/
Matériaux métalliques
Metallic materials
Essai de pliage
Bend test
Angle de pliage α, allongement
Bend angle α, extension
NF E 25-005
NF EN ISO 7438 /
Matériaux métalliques
Metallic materials
Essai de charge d’épreuve
Proof load test
Caractéristiques géométriques, résistance au pliage, au serrage, à l’écrasement, à la torsion
Geometrical characteristics, resistance to buckling, tightening, crash resistance,
torsional resistance
NF E 25-005
ISO 898-2
NF EN ISO 898-6 (Norme abrogée)
ASTM F606
NF E 25-005
ISO 898-2
NF EN ISO 898-6 (Standard withdrawn)
ASTM F606
/
Matériaux métalliques
Metallic materials
Essai d’évasement
Flaring test
Résistance à l’évasement
Flaring resistance
NF E 25-005
NF EN ISO 10484
ASTM F606
/
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 8/23
MATERIAUX / MATERIAUX METALLIQUES / Essais mécaniqu es (29-1) MATERIALS / METALLIC MATERIALS/ Mechanical tests (29-1)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée
Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Objet Item
Rail de chemin de fer
Rail track
Détermination de contraintes résiduelles après sciage du
patin de rail
Saw cutting test to determine residual stresses in rail base
Contraintes résiduelles en MPa
Residual stresses in MPa
NF EN 13674-1 (Annexe C)
NF EN 13674-1 (Annex C)
Instrumentation du patin de rail au moyen de jauges de contrainte
puis sciage de patin et mesure de la contrainte résiduelle
Instrumentation of rail base using strain gauges then saw cutting base and measuring residual
stress
Jauges de contrainte et chaine de mesure associée
scie
Strain gauges and associated measurement
chain
saw
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 9/23
MATERIAUX / MATERIAUX METALLIQUES / Essais d'endura nce ou de fatigue (29-1) MATERIALS / METALLIC MATERIALS/ Endurance or fatigue tests (29-1)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée
Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Objet Item
Matériaux métalliques
Metallic materials
Détermination du facteur d’intensité de contrainte
critique en déformation plane
Determination of plane-strain fracture toughness
K1C
ASTM E399
NF EN ISO 12737
BS 7448-1
BS 7448-2 (Norme abrogée)
NF EN ISO 15653
NF EN 13674-1 (§ 8.2)
ASTM E399
NF EN ISO 12737
BS 7448-1
BS 7448-2 (Standard withdrawn)
NF EN ISO 15653
NF EN 13674-1 (§ 8.2)
Pré fissuration par fatigue puis application d'un effort statique croissant jusqu’à
rupture
Fatigue precracking followed by application of increasing
static effort to failure
Machine de fatigue machine de traction
Fatigue machine traction machine
Matériaux métalliques
Metallic materials
Détermination de l’écartement à fond de fissure
Determination of crack spacing
CTOD
NF A03-182 (Norme abrogée)
ASTM E1290
BS 7448-1
BS 7448-2 (Norme abrogée)
NF EN ISO 15653
NF A03-182 (Standard withdrawn)
ASTM E1290
BS 7448-1
BS 7448-2 (Standard withdrawn)
NF EN ISO 15653
Pré fissuration par fatigue puis application d'un effort statique croissant jusqu’à
rupture
Fatigue precracking followed by application of increasing
static effort to failure
Machine de fatigue machine de traction
Fatigue machine traction machine
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 10/23
MATERIAUX / MATERIAUX METALLIQUES / Essais d'endura nce ou de fatigue (29-1) MATERIALS / METALLIC MATERIALS/ Endurance or fatigue tests (29-1)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée
Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Objet Item
Matériaux métalliques
Metallic materials
Mesure de la vitesse de propagation de fissure (da/dN)
en fonction du ∆K appliqué
Measurement of propagation speed of crack (da/dN)
depending on ∆K applied
Courbe da/dN =f (∆K)
da/dN =f (∆K) curve
ISO 12108
NF EN 13674-1 (§ 8.3)
ASTM E647
ISO 12108
NF EN 13674-1 (§ 8.3)
ASTM E647
Propagation d’une fissure par application d’une charge cyclique sur une éprouvette
pré-fissurée
Crack propagation by application of a cyclic load on a precracked test piece
Machine de fatigue machine de traction
Fatigue machine traction machine
Matériaux métalliques
Metallic materials
Essai de fatigue par charge axiale
Axial load fatigue test
Limite d’endurance Courbe S-N de
résistance à la fatigue
Endurance limit S-N curve of fatigue
resistance
NF A03-401
ISO 1099
NF EN 13674-1 (§ 8.4)
ASTM E466
NF A03-401
ISO 1099
NF EN 13674-1 (§ 8.4)
ASTM E466
Application de contraintes cycliques inférieures à la
limite d’élasticité et détermination du nombre de
cycles à rupture
Application of cyclic stresses below the limit of elasticity and determination of the
number of cycles to failure
Machines de fatigue Enceinte climatique, four
Système de régulation de la température et de
l’environnement d’essai.
Fatigue machine Climatic chamber, furnace
System for adjusting temperature and test
environment
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 11/23
MATERIAUX / MATERIAUX METALLIQUES / Essais métallog raphiques (29-4) MATERIALS / METALLIC MATERIALS/ Metallographic tests (29-4)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Matériaux métalliques
Metallic materials
Détermination de la grosseur du grain
Determination of apparent grain size
Indice de grosseur de grain
Grading fraction index
NF EN ISO 643
NF A 04-503
NF A 04-505
NF EN ISO 2624
ASTM E112
/
Matériaux métalliques
Metallic materials
Détermination de la Teneur en inclusions non métalliques des aciers
Determination of content of nonmetallic inclusions
Teneur inclusionnaire
Content of inclusions
NF A 04-106 (Norme abrogée)
ASTM E45
DIN 50602
ISO 4967
NF A 04-106 (Standard withdrawn)
ASTM E45
DIN 50602
ISO 4967
/
Matériaux métalliques
Metallic materials
Détermination de la Teneur en inclusions non métalliques du fil machine
Determination of content in nonmetallic inclusions of wire rod
Teneur inclusionnaire
Content of inclusions
NF A 04-107 (Norme abrogée)
NF A 04-107 (Standard withdrawn)
/
Matériaux métalliques
Metallic materials
Détermination de la profondeur de décarburation du fil machine
Determination of depth of decarburization of wire rod
Profondeur de traitement
Depth of treatment NF A 04-111 /
Matériaux métalliques
Metallic materials
Détermination de la profondeur de décarburation
Determination of depth of decarburization
Profondeur de traitement
Depth of treatment
NF EN ISO 3887
ASTM E1077
NF EN ISO 898-1
/
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 12/23
MATERIAUX / MATERIAUX METALLIQUES / Essais métallog raphiques (29-4) MATERIALS / METALLIC MATERIALS/ Metallographic tests (29-4)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Matériaux métalliques
Metallic materials
Détermination de la profondeur conventionnelle de cémentation
Determination of conventional carburizing depth
Profondeur de traitement
Depth of treatment ISO 18203 /
Matériaux métalliques
Metallic materials
Détermination de la profondeur de trempe après chauffage superficiel
Determination of depth of tempering after flame or induction heating
Profondeur de traitement
Depth of treatment
NF EN 10328
ISO 18203 /
Matériaux métalliques
Metallic materials
Détermination de l’épaisseur totale ou conventionnelle des couches minces
superficielles durcies
Determination of total or effective thickness of thin layers for surface
hardening
Epaisseur de traitement
Thickness of treatment
NF A 04-204
ISO 18203 /
Matériaux métalliques
Metallic materials
Détermination de la résistance à la corrosion en milieu acide sulfurique –
sulfate cuivrique
Determination of corrosion resistance in sulfuric acid–copper sulfate medium
Taux de corrosion Profondeur de corrosion
Rate of corrosion Depth of corrosion
NF EN ISO 3651-2
ASTM A262 (practice E)
RCCM MC 1310
DIN 50914 (Norme abrogée)
NF EN ISO 3651-2
ASTM A262 (method E)
RCCM MC 1310
DIN 50914 (Standard withdrawn)
/
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 13/23
MATERIAUX / MATERIAUX METALLIQUES / Essais métallog raphiques (29-4) MATERIALS / METALLIC MATERIALS/ Metallographic tests (29-4)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée
Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Matériaux métalliques
Metallic materials
Détermination de la résistance à la corrosion en milieu nitrique chaud
Determination of corrosion resistance in hot nitric acid medium
Taux de corrosion Profondeur de corrosion
Rate of corrosion Depth of corrosion
NF EN ISO 3651-1
ISO 3651-1
ASTM A262 (practice C)
NF EN ISO 3651-1
ISO 3651-1
ASTM A262 (method C)
/
Matériaux métalliques
Metallic materials
Détermination de la résistance à la corrosion par attaque à l’acide oxalique
Determination of the resistance to corrosion from oxalic acid attack
Taux de corrosion
Rate of corrosion
ASTM A262 (practice A)
ASTM A262 (method A) /
Matériaux métalliques
Metallic materials
Détermination de la résistance à la corrosion intergranulaire
Determination of resistance to intergranular corrosion
Taux de corrosion Profondeur de corrosion
Rate of corrosion Depth of corrosion
NF EN ISO 9400
ASTM A262 (practice B, C, E)
ASTM G28
NF EN ISO 9400
ASTM A262 (method B, C, E)
ASTM G28
/
Matériaux métalliques
Metallic materials
Détermination de la résistance à la corrosion par piqûre
Determination of resistance to pitting corrosion
Taux de corrosion Profondeur de corrosion
Rate of corrosion Depth of corrosion
ASTM G48 (method A)
ASTM A923 (method C)
ASTM G48 (method A)
ASTM A923 (method C)
/
Matériaux métalliques
Metallic materials
Détermination des phases intermétalliques
Determination of intermetallic phases
% de phase
phase %
ASTM A923 (method A)
ASTM A923 (method A) /
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 14/23
MATERIAUX / MATERIAUX METALLIQUES / Essais métallog raphiques (29-4) MATERIALS / METALLIC MATERIALS/ Metallographic tests (29-4)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée
Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Matériaux métalliques
Metallic materials
Examen macroscopique par impression aux sels d’argent et à l’acide sulfurique
Macroscopic examination using printing with silver salts and sulfuric acid
Critères géométriques, morphologiques et de répartition
Geometrical, morphological and distribution criteria
NF A 05-151 (Norme abrogée)
NF E 25-005
ASTM E1180
ISO 4968
NF A 05-151 (Standard withdrawn)
NF E 25-005
ASTM E1180
ISO 4968
/
Matériaux métalliques
Metallic materials
Examen macroscopique par attaque aux acides forts
Macroscopic examination using strong acid attack
Critères géométriques, morphologiques et de répartition
Geometrical, morphological and distribution criteria
NF A 05-152 (Norme abrogée)
ASTM E340
ISO 4969
NF A 05-152 (Standard withdrawn)
ASTM E340
ISO 4969
/
Matériaux métalliques
Metallic materials
Examen macroscopique par attaque aux sels de cuivre
Macroscopic examination using copper salts attack
Critères géométriques, morphologiques et de répartition
Geometrical, morphological and distribution criteria
NF A 05-153 (Norme abrogée)
NF A 05-153 (Standard withdrawn) /
Matériaux métalliques
Metallic materials
Préparation des échantillons en vue d’examens micrographiques
Preparation of samples for micrographic examinations
/ NF A 05-150
ASTM E3 /
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 15/23
MATERIAUX / MATERIAUX METALLIQUES SOUDES-BRASES / E ssais métallographiques (29-5) MATERIALS / METALLIC , WELDED-BRAZED MATERIALS/ Metallographic tests (29-5)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Matériaux métalliques : Assemblages soudés
Metallic materials Welded assemblies
Examen macroscopique et microscopique
Macroscopic and microscopic examination
Présence de défauts
Presence of faults
NF EN 1321 (Norme abrogée)
NF EN ISO 17639
NF EN 1321 (Standard withdrawn)
NF EN ISO 17639
/
Matériaux métalliques : Assemblages soudés
Metallic materials Welded assemblies
Essai de texture
Texture test
Taille, type de défauts, répartition
Size, type of fault, distribution
NF EN 1320 (Norme abrogée)
NF EN ISO 9017
NF EN 1320 (Standard withdrawn)
NF EN ISO 9017
/
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 16/23
MATERIAUX / MATERIAUX METALLIQUES SOUDES-BRASES / E ssais métallographiques (29-5) MATERIALS / METALLIC , WELDED-BRAZED MATERIALS/ Metallographic tests (29-5)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée
Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Matériaux métalliques : Assemblages soudés
Metallic materials Welded assemblies
Essai de traction à l’ambiante
Tensile test at ambient temperature Rm
NF EN ISO 4136
NF EN 895 (Norme abrogée)
ASME QW-150
Méthode interne : T0220*
NF EN ISO 4136
NF EN 895 (Standard withdrawn)
ASME QW-150
Internal method: T0220*
/
Matériaux métalliques : Assemblages soudés
Metallic materials Welded assemblies
Essai de traction longitudinale
Longitudinal tensile test Rm, A, Rp, Z
NF EN ISO 5178
NF EN 876 (Norme abrogée)
Méthode interne : T0220*
NF EN ISO 5178
NF EN 876 (Standard withdrawn)
Internal method: T0220*
/
Matériaux métalliques : Assemblages soudés
Metallic materials Welded assemblies
Essai de flexion par choc
Impact bending test KU, KV (J)
NF EN ISO 9016
NF EN 875 (Norme abrogée)
ASME QW-170
Méthode interne : T0220*
NF EN ISO 9016
NF EN 875 (Standard withdrawn)
ASME QW-170
Internal method: T0220*
/
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 17/23
MATERIAUX / MATERIAUX METALLIQUES SOUDES-BRASES / E ssais métallographiques (29-5) MATERIALS / METALLIC , WELDED-BRAZED MATERIALS/ Metallographic tests (29-5)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Caractéristique mesurée ou recherchée
Characteristic measured or sought
Référence de la méthode Method reference
Remarques / Limitations Comments/ Restrictions
Matériaux métalliques : Assemblages soudés
Metallic materials Welded assemblies
Essai de pliage
Bend test
Angle de pliage α, allongement
Bend angle α, extension
NF EN ISO 5173
NF EN 910 (Norme abrogée)
ASME QW-160
NF EN ISO 5173
NF EN 910 (Standard withdrawn)
ASME QW-160
/
Matériaux métalliques : Assemblages soudés
Metallic materials Welded assemblies
Essai de dureté Vickers et Brinell
Vickers and Brinell hardness test
Dureté Vickers et Brinell HBS2,5/187,5
Vickers and Brinell hardness HBS2.5/187.5
NF EN ISO 9015-1
NF EN 1043-1 (Norme abrogée)
NF EN ISO 9015-1
NF EN 1043-1 (Standard withdrawn)
/
Matériaux métalliques : Assemblages soudés
Metallic materials Welded assemblies
Essai de microdureté Vickers
Vickers microhardness test
Dureté Vickers
Vickers hardness
NF EN ISO 9015-2
NF EN 1043-2 (Norme abrogée)
ISO 22826
NF EN ISO 9015-2
NF EN 1043-2 (Standard withdrawn)
ISO 22826
/
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 18/23
EQUIPEMENTS INDUSTRIELS ET PRODUIT D’INGENIERIE / TOUT EQUIPEMENT ET PRODUIT (INDUSTRIEL ET DE CONSOMMATION) SOUMIS A DES ESSAIS EN ENVIRONNEMENT CLIMATIQUE ET MECANIQUE / Essais en e nvironnement climatique (38)
INDUSTRIAL EQUIPMENT AND ENGINEERING PRODUCT / ANY EQUIPMENT AND PRODUCT (INDUSTRIAL AND CONSUMABLE) SUBJECT TO TESTS IN A CLIMATIC AND MECHANICAL ENVIRONMENT / Tests in a climatic environment (38)
Objet Item
Nature d'essai ou d'analyse
Type of test or analysis
Caractéristique mesurée ou recherchée
Characteristic measured or sought
Référence de la méthode
Method reference
Principe de la méthode Principle behind the method
Principaux moyens d’essai Main test methods
Eprouvettes de laboratoire
Pièces
Laboratory test pieces
Parts
Essai au brouillard salin neutre
Neutral salt spray test
Corrosion
Corrosion
Renault D17 1058
NF ISO 9227
NF A 05-109
ASTM B117
Attaque corrosive accélérée par un brouillard salin artificiel
Corrosive attack accelerated by artificial salt spray
Enceintes de brouillard salin de volumes utiles :
1150 x 800 x 1100mm 1650 x 740 x 570mm 800 x 600 x 800mm
Salt spray chambers in useful volumes:
1150 x 800 x 1100mm 1650 x 740 x 570mm 800 x 600 x 800mm
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 19/23
MATERIAUX / MATERIAUX METALLIQUES / Analyses physic o-chimiques (29-2) MATERIALS / METALLIC MATERIALS/ Physical-chemical analyses (29.2)
Objet Item
Caractéristique mesurée ou recherchée Characteristic measured or sought
Principe de la méthode Principle behind the method
Référence de la méthode Method reference
Aciers non alliés et faiblement
alliés
Unalloy and low alloy steels
Eléments : C, Si, Mn, S, P, Ni, Cr, Mo, Cu, Al, Ti, V, Co, Sn, Sb, Pb, As, B, Nb
Elements: C, Si, Mn, S, P, Ni, Cr, Mo, Cu, Al, Ti, V, Co, Sn, Sb, Pb, As, B, Nb
Spectrométrie d'émission sur "massif"
Emission spectrometry on solid samples
Méthode interne ESS-ANA-INS-002*
Internal method ESS-ANA-INS-002*
Eléments : Si, Mn, P, Ni, Cr, Mo, Cu, Al, Ti, V, Co, Pb, Nb, Ta, Zr
Elements: Si, Mn, P, Ni, Cr, Mo, Cu, Al, Ti, V, Co, Pb, Nb, Ta, Zr
Spectrométrie d'émission à plasma
Plasma emission spectrometry
Méthode interne ESS-ANA-INS-021*
Internal method ESS-ANA-INS-021*
Eléments : C, S
Elements: C, S
Combustion et Absorption Infra Rouge
Combustion and Absorption Infra-red
Méthode interne ESS-ANA-INS-004*
Internal method ESS-ANA-INS-004*
Aciers fortement alliés
High alloy steels
Eléments : C, Si, Mn, S, P, Ni, Cr, Mo, Cu, Al, Ti, V, Co, B, Nb
Elements: C, Si, Mn, S, P, Ni, Cr, Mo, Cu, Al, Ti, V, Co, B, Nb
Spectrométrie d'émission sur "massif"
Emission spectrometry on solid samples
Méthode interne ESS-ANA-INS-001*
Internal method ESS-ANA-INS-001*
Eléments : Si, Mn, P, Ni, Cr, Mo, Cu, Al, Ti, V, Co, Nb, Ta
Elements: Si, Mn, P, Ni, Cr, Mo, Cu, Al, Ti, V, Co, Nb, Ta
Spectrométrie d'émission à plasma
Plasma emission spectrometry
Méthode interne ESS-ANA-INS-022*
Internal method ESS-ANA-INS-022*
Eléments : C, S
Elements: C, S
Combustion et Absorption Infra Rouge
Combustion and Infra-red Absorption
Méthode interne ESS-ANA-INS-004*
Internal method ESS-ANA-INS-004*
Nickel et alliages
Nickel and alloys
Eléments : C, S
Elements: C, S
Combustion et Absorption Infra Rouge
Combustion and Infra-red Absorption
Méthode interne ESS-ANA-INS-004*
Internal method ESS-ANA-INS-004*
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 20/23
Unité technique : Laboratoire Mecasem - Vérification des équipements d'essais Portée flexible FLEX1 : Le laboratoire est reconnu compétent pour pratiquer les essais en suivant les méthodes référencées et leurs révisions ultérieures. *Portée FIXE : Le laboratoire est reconnu compétent pour pratiquer les essais en respectant strictement les méthodes mentionnées dans la portée d’accréditation. Les modifications techniques du mode opératoire ne sont pas autorisées. Technical unit: Laboratoire Mecasem - Verification of test equipment FLEX1 flexible scope: The laboratory is recognised as competent to carry out the tests, in compliance with the referenced methods and their subsequent revisions. *FIXED scope: The laboratory is recognised as competent to carry out the tests, in strict compliance with the methods referred to in the scope of accreditation. Technical modifications to the procedure are not authorised.
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 21/23
EQUIPEMENTS INDUSTRIELS ET PRODUITS D'INGENIERIE / Machines d'essais mécaniques / Essais de performanc e ou d'aptitude à la fonction (122-1) INDUSTRIAL EQUIPMENT AND ENGINEERING PRODUCTS / Mechanical test machines / Performance or proficiency tests (122-1)
Objet Item
Caractéristique mesurée ou recherchée
Characteristic measured or sought
Référence de la méthode Method reference
Principaux moyens d’essai
Main test methods
Lieu de réalisation Location AFNOR
Autres Other
Machines de traction
Traction machines
Vérification et étalonnage du système de mesure de force en traction
Verification and calibration of system for measuring tensile force
NF EN ISO 7500-1 ISO 7500-1
ASTM E4
Chaîne de mesure de force
Masses étalons
Force measurement chain
Mass standards
Sur site
On site
Machines de traction pour des matériaux autres que métalliques
Traction machines for materials other than metallic ones
Vérification et étalonnage du système de mesure de force en traction
Verification and calibration of system for measuring tensile force
/
Méthode interne : MET-FOR-INS-003*
Internal method: MET-FOR-INS-003*
Chaîne de mesure de force
Masses étalons
Force measurement chain
Mass standards
Sur site
On site
Machines de compression
Compression machines
Vérification et étalonnage du système de mesure de force en compression
Verification and calibration of system for measuring compression force
NF EN ISO 7500-1 ASTM E4
Chaîne de mesure de force
Masses étalons
Force measurement chain
Mass standards
Sur site
On site
Machines hydrauliques pour des essais de compression des matériaux durs
Hydraulic machines for compression tests on hard materials
Vérification de l’exactitude du système d’indication de force
Check on accuracy of system for indicating force
/
Méthode interne : MET-FOR-INS-003*
Internal method: MET-FOR-INS-003*
Chaîne de mesure de force
Masses étalons
Force measurement chain
Mass standards
Sur site
On site
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 22/23
EQUIPEMENTS INDUSTRIELS ET PRODUITS D'INGENIERIE / Machines d'essais mécaniques / Essais de performanc e ou d'aptitude à la fonction (122-1) INDUSTRIAL EQUIPMENT AND ENGINEERING PRODUCTS / Mechanical test machines / Performance or proficiency tests (122-1)
Objet Item
Caractéristique mesurée ou recherchée Characteristic measured or sought
Référence de la méthode Method reference
Principaux moyens d’essai
Main test methods
Lieu de réalisation Location AFNOR
Autres Other
Machines de dureté BRINELL
BRINELL hardness machines
Vérification globale de la machine de dureté Méthode indirecte
Overall verification of hardness machine Indirect method
NF EN ISO 6506-2 ISO 6506-2 ASTM E10
Blocs de référence
Test blocks
Sur site
On site
Machines de dureté ROCKWELL
ROCKWELL hardness machines
Vérification globale de la machine de dureté Méthode indirecte
Overall verification of hardness machine Indirect method
NF EN ISO 6508-2 ISO 6508-2 ASTM E18
Blocs de référence
Test blocks
Sur site
On site
Machines de dureté VICKERS
VICKERS hardness machines
Vérification globale de la machine de dureté Méthode indirecte
Overall verification of hardness machine Indirect method
NF EN ISO 6507-2 ISO 6507-2 ASTM E384
Blocs de référence
Test blocks
Sur site
On site
Moutons Pendules Flexion par choc - Méthode INDIRECTE (moutons pendules analogiques exclus)
Pendulum impact testers Impact bending - INDIRECT method
(Pendulum impact testers excluding analogue types)
Vérification globale du mouton-pendule (énergie et caractéristique dimensionnelle)
Overall verification of pendulum impact tester (energy and dimensional characteristic)
NF EN 10045-2 (Norme abrogée)
ISO 148-2
NF EN 10045-2 (Standard withdrawn) ISO 148-2
/
Eprouvettes charpy V de référence
Charpy V reference test pieces
Sur site
On site
Extensomètres Déplacement de traverse
Extensometers Traverse displacement
Vérification d’extensomètre par variation de longueur
Verification of extensometer by changing length
NF EN ISO 9513
ASTM E83 ASTM E2309
Méthode interne : MET-FOR-INS-007*
ASTM E83 ASTM E2309
Internal method: MET-FOR-INS-007*
Banc micrométrique
Micrometer bench
Sur site
On site
Annexe technique à l’attestation n° 1-0533 rév. 8 / Technical annex to accreditation No. 1-0533 rev. 8
LAB FORM 37 – Révision 06 – 07 Avril 2017 Page 23/23
EQUIPEMENTS INDUSTRIELS ET PRODUITS D'INGENIERIE / ENCEINTES CLIMATIQUES / Essais de performance ou d' aptitude à la fonction (122-2) INDUSTRIAL EQUIPMENT AND ENGINEERING PRODUCTS / CLIMATIC CHAMBERS/ Performance or proficiency tests (122-2)
Objet Item
Nature d'essai ou d'analyse Type of test or analysis
Domaine d'application
Field of application
Principe de la méthode Principle
behind the method
Principaux moyens utilisés Main test methods
Référence de la méthode
Method reference
Lieu de réalisation Location
Enceintes Thermostatiques
Thermostatic Chambers
Détermination de l’écart de consigne, de l’erreur d’indication, de l’homogénéité et
de la stabilité de l’environnement, du temps de récupération en température
Determination of the target deviation, error of indication, uniformity and stability of the environment, temperature recovery
time
-40°C à 200°C
-40°C to 200°C
Mesure par comparaison à des sondes de température de
référence
Measurement by comparing
reference temperature
sensors
Centrale de mesure associées à des sondes à
résistance ou à des couples thermo-électriques
Power monitor associated with resistance thermometers or
thermoelectric pairs
FD X15-140
Sur site
On site Bains
Baths
Détermination de l’écart de consigne, de l’erreur d’indication, de l’homogénéité et
de la stabilité de l’environnement
Determination of the target deviation, error of indication, uniformity and stability
of the environment
-40°C à 200°C
-40°C to 200°C Méthode interne : MET-TEM-INS-010*
Internal method: MET-TEM-INS-010*
Enceinte à brouillard salin
Salt spray chamber
0°C à 200°C
0°C to 200°C
# Accréditation rendue obligatoire dans le cadre réglementaire français précisé par le texte cité en référence dans le document Cofrac LAB INF 99 disponible sur www.cofrac.fr # Accreditation made mandatory under French law, as detailed in the text cited in reference in document Cofrac LAB INF 99 and available from www.cofrac.fr
Date de prise d’effet/ Effective date : 01/11/2017 Date de fin de validité/ Expiry date : 31/10/2022
Le Responsable d’Accréditation Pilote The Pilot Accreditation Manager
Pierre-Yves BENNER
Cette annexe technique annule et remplace l’annexe technique 1-0533 Rév. 7. This technical annex cancels and replaces technical annex 1-0533 Rev. 7.
Comité Français d’Accréditation - 52, rue Jacques Hillairet - 75012 PARIS
Tél. : 33 (0)1 44 68 82 20 – Fax : 33 (0)1 44 68 82 21 Siret : 397 879 487 00031 www.cofrac.fr