ASTM uPVC Schedule 80
27
SPECIFICATION
specification
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
Schedule 80 Pipes
Temperature Consideration
Standards & Quality
Applications
chemical processing treated and untreated effluent
agricultural cooling water
potable water irrigation
Sch. 80 pipe is resistant to most acids, alkalis, salts, fats, oxidants and halogens. However, Sch. 80 pipe should not be
used with ester, ketones, ethers and aromatic or chlorinated hydrocarbons.
Typical applications include:
Being a thermoplastic material, Sch. 80 pipe will display variations in its physical properties as the temperature
changes. As the temperature falls, the pipe's stiffness and tensile strength increase, thereby increasing the pipe's
pressure capacity. Conversely, as the operating temperature rises, the pipe decreases in stiffness and tensile strength;
consequently, the pressure capacity of the pipe will be reduced. With the drop in temperature, Sch. 80 pipe decreases
in impact strength and becomes less ductile. As the temperature rises, the impact strength and flexibility of the pipe
increase.
Thermal Linear Expansion
Sch. 80 pipe expands and contracts with change in
temperature. The coefficient of thermal expansion is 7 X 10-5
mm/mm/ºC. This is equivalent to 7mm change in length for
every 10 meters for every 10ºC change in temperature.
Pressure De-rating Factor
The pressure ratings given are for operating temperature of
water at 73ºF (23ºC). For operating temperature above 73ºF
(23ºC), the working pressure has to be de-rated by
multiplying the working pressure of the selected pipe at 73ºF
(23ºC), by the appropriate de-rating factor to determine the
maximum permissible working pressure of the pipes at the
elevated temperature chosen. Nevertheless, Sch. 80 pipe
should not be used at temperature in excess of 140ºF
(60ºC).
OPERATING TEMP DE-RATING FACTOR
Fº Cº
73 23 1.00
80 26 0.88
90 32 0.76
100 38 0.64
110 43 0.54
120 49 0.42
130 54 0.32
140 60 0.20
Sch. 80 pipe is manufactured to comply with NSF
Standard 61, CSA B 137.3 and ASTM D1785,
consistently meeting the Quality Assurance test
requirements of the standard with regards to burst
pressure, flattening and extrusion quality.
28product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
PIPES
Chemical resistance:
Sch. 80 pipes have excellent chemical resistance which allows the
transportation of many acids, alkalis and chemical concentrates
without fear of corrosion and environmental pollution.
Abrasion resistance:
Sch. 80 pipes offer good resistance to abrasion and erosion from
aggressive slurries, which can rapidly damage steel or other
traditional pipe materials.
Smooth bore:
The exceptionally smooth bore results in low friction head losses and
also inhibits the formation of scale, with consequent savings in pump
energy consumption and reduced pressure drops.
Light weight:
At 5 times lighter than steel pipe, Sch. 80 pipes are much easier to
handle, especially during installation at site.
Easy to join:
Solvent welding gives fast and trouble free installation and allows
simple modifications to existing systems.
PRODUCT NOMINAL PIPE OUTSIDE WALL MAX WORKING
CODE DIAMETER LENGTH DIAMETER THICKNESS PRESS
(in) (mm) L (M) (in) (mm) (in) (mm) (psi) (MPa)
SCH. 80 Pipes Benefits
1100 015 60 80 ½ 15 6.0 0.836 - 0.844 21.2 - 21.4 0.147 - 0.167 3.7 - 4.2 850 5.86
1100 020 60 80 ¾ 20 6.0 1.046 - 1.054 26.6 - 26.8 0.154 - 0.17 3.9 - 4.4 690 4.76
1100 025 60 80 1 25 6.0 1.310 - 1.320 33.3 - 33.5 0.179 - 0.200 4.6 - 5.1 630 4.34
1100 032 60 80 1¼ 32 6.0 1.655 - 1.665 42.0 - 42.3 0.191 - 0.214 4.9 - 5.4 520 3.59
1100 040 60 80 1½ 40 6.0 1.894 - 1.906 48.1 - 48.4 0.200 - 0.224 5.1 - 5.7 470 3.24
1100 050 60 80 2 50 6.0 2.369 - 2.381 60.2 - 60.5 0.218 - 0.244 5.5 - 6.2 400 2.76
1100 065 60 80 2½ 65 6.0 2.868 - 2.882 72.8 - 73.2 0.276 - 0.309 7.0 - 7.8 420 2.90
1100 080 60 80 3 80 6.0 3.492 - 3.508 88.7 - 89.1 0.300 - 0.336 7.6 - 8.5 370 2.55
1100 100 60 80 4 100 6.0 4.491 - 4.509 114.1 - 114.5 0.337 - 0.377 8.6 - 9.6 320 2.21
1100 155 60 80 6 155 6.0 6.614 - 6.636 168.0 - 168.6 0.432 - 0.484 11.0 - 12.3 280 1.93
1100 200 60 80 8 200 6.0 8.610 - 8.640 218.7 - 219.5 0.500 - 0.560 12.7 - 14.2 250 1.72
1100 250 60 80 10 250 6.0 10.735 - 10.765 272.7 - 273.4 0.593 - 0.664 15.1 - 16.9 230 1.59
1100 300 60 80 12 300 6.0 12.735 - 12.765 323.5 - 324.2 0.687 - 0.769 17.5 - 19.5 230 1.59
Pipes Dimensions & Working Pressures
Schedule 80 Pipes (Plain Ended)
29
SPECIFICATION
specification
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
Manufacturer’s Product Specification:
Schedule 80 Fittings
Scope
This specification sheet covers the manufacturer’s requirements for Xirtec® 140 PVC Schedule 80 pipe fittings as
manufactured by IPEX. These fittings meet or exceed the standards set by the American Society for Testing and Materials
(ASTM) and the National Sanitation Foundation (NSF) International, Standards 14/61.
PVC Materials
Rigid Xirtec® 140 PVC (Polyvinyl Chloride) used in the manufacture of Schedule 80 fittings is of Type I, Grade 1 compound
(cell classification 12454) as stated in ASTM D1784. Raw material used in molding shall contain the specified amounts of
color pigment, stabilizers, and other additives approved by NSF International.
Dimensions
Physical dimensions and tolerances of Xirtec® 140 PVC Schedule 80 IPS fittings as manufactured by IPEX meet the
requirements of ASTM Standard Specification D2467 for socket-type fittings and ASTM D2464 for threaded fittings.
Threaded fittings have Taper Pipe Threads in accordance with ANSI/ASME B1.20.1. Flanged fittings have nominal
dimensions in accordance with ANSI/ASME B16.5.
Marking
Xirtec® 140 PVC Schedule 80 fittings are marked as prescribed in ASTM D2467 and D2464 to indicate the manufacturer’s
name and trademark, material designation,the NSF mark, size of fitting, and ASTM designation D2467 (socket) or D2464
(threaded).
Sample Specification
All Schedule 80 socket fittings shall conform to ASTM D2467. All Schedule 80 threaded fittings shall conform to ASTM
D2464. All 150 Class flanges shall conform to ANSI/ASME B16.5. All pipe, fittings, and valves shall be compatible Xirtec®
140 compound and produced by one manufacturer; as supplied by IPEX.
Notes
All dimensions are in inches unless otherwise specified. Dimensions are subject to change without notice. Contact the
factory for clarifications.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
Schedule 80
COUPLINGS
Soc x Soc
Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D L M
1/4 x 1/4
3/8 x 3/8
1/2 x 1/2
3/4 x 3/4
1 x 1
1-1/4 x 1-1/4
1-1/2 x 1-1/2
2 x 2
2-1/2 x 2-1/2
3 x 3
4 x 4
6 x 6
8 x 8
COUPLINGS
M
LD
C
C
829002 036088 0.655 0.302 1.375 0.845
829003 036089 0.750 0.423 1.625 1.000
829005 036090 0.900 0.526 1.920 1.240
829007 036091 1.035 0.722 2.170 1.505
829010 036092 1.145 0.936 2.395 1.770
829012 036093 1.280 1.255 2.670 2.140
829015 036094 1.400 1.476 2.915 2.410
829020 036095 1.535 1.913 3.170 2.900
829025 036096 1.780 2.290 3.755 3.570
829030 036097 1.900 2.864 4.025 4.195
829040 036098 2.275 3.786 4.765 5.285
829060 036099 3.020 5.709 6.310 7.645
829080 036100 4.540 7.565 9.625 9.870
Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C1 C2 D1 D2 L M1 M2
1/2 x 1/4
3/4 x 1/2
1 x 1/2
1 x 3/4
1-1/4 x 3/4
1-1/2 x 1
2 x 1-1/2
REDUCING COUPLINGS
830072
830101
830130
830131
830167
830211
830251
036746
036748
036749
036750
036751
036754
035758
0.875
1.000
1.125
1.125
1.250
1.375
1.500
0.625
0.875
0.985
1.000
1.525
1.125
1.375
0.526
0.722
0.936
0.936
1.255
1.476
1.913
0.302
0.526
0.526
0.722
0.722
0.936
1.476
2.280
2.345
2.740
2.740
3.040
3.155
3.405
1.240
1.505
1.770
1.770
2.140
2.410
2.900
0.845
1.240
1.240
1.505
1.505
1.770
2.410
M1
C1
L
C2
D1
D2
M2
Schedule 80
COUPLINGS
FPT x FPT - reducing
30
Imported fittings from Aliaxis.
Imported fittings from Aliaxis.
FITTINGS
product 31
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
Schedule 80
COUPLINGS
FPT x FPT
Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. T D L M
¼ x ¼3⁄8 x 3⁄8
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
2-½ x 2-½
3 x 3
4 x 4
COUPLINGS
830002 036104 0.595 0.302 1.345 0.845
830003 036105 0.595 0.423 1.470 1.000
830005 036106 0.755 0.526 1.605 1.240
830007 036107 0.755 0.722 1.620 1.505
830010 036108 0.940 0.936 2.010 1.770
830012 036109 1.055 1.255 2.210 2.140
830015 036110 1.065 1.476 2.225 2.410
830020 036111 1.200 1.913 2.500 2.900
830025 036112 1.460 2.290 3.125 3.570
830030 036113 1.530 2.864 3.190 4.195
830040 036114 1.585 3.786 3.405 5.285
Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C1 C2 D1 D2 L M1 M2
3/4 x 1/2
1 x ½
1 x ¾
1-¼ x ¾
1-¼ x 1
1-½ x ½
1-½ x ¾
1-½ x 1
1-½ x 1-¼
2 x ½
2 x 1
2 x 1-½
3 x 2
4 x 2
4 x 3
6 x 4
8 x 6
REDUCING COUPLINGS
829101 036719 1.040 0.885 0.722 0.526 2.080 1.505 1.240
829130 036720 1.165 0.880 0.936 0.526 2.380 1.770 1.240
829131 036721 1.165 1.035 0.936 0.722 2.385 1.770 1.505
829167 036723 1.280 1.000 1.255 0.722 2.590 2.140 1.505
829168 036724 1.280 1.155 1.255 0.936 2.660 2.140 1.770
829209 036725 1.375 0.875 1.476 0.526 2.845 2.140 1.240
829210 036726 1.375 1.000 1.476 0.722 2.845 2.140 1.505
829211 036727 1.410 1.160 1.476 0.936 3.060 2.140 1.770
829212 036728 1.410 1.280 1.476 1.255 3.050 2.140 2.140
829247 036897 1.500 0.885 1.913 0.526 2.480 2.900 1.240
829249 036729 1.545 1.160 1.913 0.936 3.530 2.900 1.770
829251 036731 1.540 1.410 1.913 1.476 3.515 2.900 2.410
829338 036735 1.910 1.535 2.864 1.913 4.200 4.195 2.900
829420 036736 2.290 1.540 3.786 1.913 5.110 5.285 2.900
829422 036738 2.290 1.905 3.786 2.864 5.105 5.285 4.195
829532 036740 3.030 2.290 5.709 3.786 6.740 7.645 5.285
829585 036743 4.040 3.000 7.565 5.709 8.040 9.870 7.645
Schedule 80
COUPLINGS
Soc x Soc - reducing
T
T
D
M
L
M1
L
M2
D1
D2
C1
C2
Imported fittings from Aliaxis.
Imported fittings from Aliaxis.
product 32
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C CM D1 D2 L Q
3⁄8 x ¼
½ x ¼
½ x 3⁄8
¾ x ½
1 x ½
1 x ¾
1-¼ x ½
1-¼ x ¾
1-¼ x 1
1-½ x ½
1-½ x ¾
1-½ x 1
1-½ x 1-¼
2 x ½
2 x ¾
2 x 1
2 x 1-¼
2 x 1-½
2-½ x 1-¼
2 ½ x 1-½
2-½ x 2
3 x 1
3 x 1-¼
3 x 1-½
3 x 2
3 x 2-½
4 x 2
4 x 2-½
4 x 3
6 x 2
6 x 3
6 x 4
8 x 4
8 x 6
REDUCING BUSHINGS
837052 036599 0.750 0.770 0.675 0.302 0.975 0.800
837072 036600 0.875 0.890 0.840 0.302 1.090 0.970
837073 036601 0.875 0.880 0.840 0.423 1.115 1.005
837101 036604 1.000 1.020 1.050 0.526 1.380 1.250
837130 036605 1.125 1.125 1.315 0.526 1.500 1.635
837131 036606 1.125 1.305 1.315 0.722 1.505 1.635
837166 036607 1.250 1.260 1.660 0.526 1.635 2.080
837167 036608 1.250 1.255 1.660 0.722 1.625 2.075
837168 036609 1.250 1.305 1.660 0.936 1.685 2.065
837209 036610 1.375 1.380 1.900 0.526 1.755 2.260
837210 036611 1.375 1.380 1.900 0.722 1.750 2.260
837211 036612 1.375 1.380 1.900 0.936 1.755 2.260
837212 036613 1.295 1.385 1.900 1.255 1.760 2.265
837247 036614 1.500 1.505 2.375 0.526 1.875 2.815
837248 036615 1.500 1.505 2.375 0.722 1.865 2.820
837249 036616 1.500 1.520 2.375 0.936 1.875 2.825
837250 036617 1.500 1.520 2.375 1.255 1.895 2.840
837251 036618 1.500 1.445 2.375 1.476 1.885 2.820
837290 036620 1.350 2.000 2.875 1.255 2.300 3.280
837291 036621 1.560 2.000 2.875 1.476 2.300 3.290
837292 036622 1.750 1.885 2.875 1.913 2.120 3.270
837335 036623 1.875 1.900 3.500 0.936 2.265 3.905
837336 036269 1.875 1.870 3.500 1.255 2.265 3.735
837337 036624 1.875 1.870 3.500 1.476 2.250 3.890
837338 036625 1.875 1.870 3.500 1.913 2.250 3.890
837339 036626 1.875 1.885 3.500 2.290 2.260 3.900
837420 036628 2.250 2.280 4.500 1.913 2.660 4.910
837421 036629 2.250 2.270 4.500 2.290 2.655 4.890
837422 036630 2.250 2.270 4.500 2.864 2.665 4.920
837528 036632 3.000 3.470 6.625 1.913 3.990 6.850
837530 036633 3.000 3.100 6.625 2.864 3.720 7.335
837532 036634 3.000 3.105 6.625 3.786 3.720 7.330
837582 136155 4.000 4.055 8.625 3.786 5.120 9.435
837585 036638 4.000 4.085 8.625 5.709 4.465 9.360
Schedule 80
REDUCING BUSHINGS
Spig x Soc
Q
C
D2
D1
CML
Imported fittings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
33
REDUCING BUSHINGS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D1 D2 L Q S T
3⁄8 x ¼
½ x ¼
½ x 3⁄8
¾ x ¼
¾ x 3⁄8
¾ x ½
1 x ¼
1 x 3⁄8
1 x ½
1 x ¾
1-¼ x ½
1-¼ x ¾
1-¼ x 1
1-½ x ½
1-½ x ¾
1-½ x 1
1-½ x 1-¼
2 x ½
2 x ¾
2 x 1
2 x 1-¼
2 x 1-½
2-½ x 2
3 x 1-½
3 x 2
3 x 2-½
4 x 2
4 x 3
Schedule 80
REDUCING BUSHINGS
MPT x FPT
839052 036647 0.423 0.302 0.810 0.805 0.600 0.625
839072 036648 0.526 0.302 0.875 0.875 0.680 0.570
839073 036649 0.526 0.423 0.940 1.000 0.745 0.580
839098 036651 0.722 0.302 1.010 1.185 0.785 0.675
839099 036652 0.722 0.423 1.005 1.200 0.785 0.600
839101 036653 0.722 0.526 0.995 1.380 0.685 0.760
839128 036654 0.936 0.302 1.230 1.500 0.960 0.630
839129 036655 0.936 0.423 1.225 1.500 0.980 0.625
839130 036656 0.936 0.526 1.130 1.685 0.815 0.765
839131 036657 0.936 0.722 1.160 1.690 0.820 0.775
839166 036658 1.255 0.526 1.370 2.070 0.990 0.695
839167 036659 1.255 0.722 1.390 2.075 1.010 0.805
839168 036660 1.255 0.936 1.395 2.070 1.015 1.020
839209 036661 1.476 0.526 1.215 2.100 0.900 0.835
839210 036662 1.476 0.722 1.375 2.315 0.985 0.805
839211 036663 1.476 0.936 1.380 2.315 0.990 0.995
839212 036664 1.476 1.255 1.380 2.315 1.010 1.015
839247 036665 1.913 0.526 1.405 2.820 1.035 0.690
839248 036666 1.913 0.722 1.385 2.760 1.005 0.810
839249 036667 1.913 0.936 1.385 2.770 0.995 0.995
839250 036668 1.913 1.255 1.410 2.815 1.035 0.860
839251 036669 1.913 1.476 1.380 2.760 1.010 1.010
839292 036672 2.290 1.913 1.970 3.125 1.555 1.065
839337 036673 2.864 1.476 1.995 3.740 1.625 1.040
839338 036674 2.864 1.913 2.030 3.755 1.625 1.065
839339 036675 2.864 2.290 2.020 3.740 1.630 1.560
839420 036676 3.786 1.913 1.940 4.730 1.550 1.000
839422 036677 3.786 2.864 2.125 4.755 1.730 1.625
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
34
REDUCING BUSHINGS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. CM D1 D2 L Q T
3⁄8 x ¼
½ x ¼
½ x 3⁄8
¾ x ¼
¾ x ½
1 x 3⁄8
1 x ½
1 x ¾
1-¼ x ½
1-¼ x ¾
1-¼ x 1
1-½ x ½
1-½ x ¾
1-½ x 1
1-½ x 1-¼
2 x ½
2 x ¾
2 x 1
2 x 1-¼
2 x 1-½
2-½ x ½
2-½ x ¾
2-½ x 1
2-½ x 1-¼
2-½ x 1-½
2-½ x 2
3 x ¾
Schedule 80
REDUCING BUSHINGS
Spig x FPT
838052
838072
838073
838098
838101
838129
838130
838131
838166
838167
838168
838209
838210
838211
838212
838247
838248
838249
838250
838251
838287
838288
838289
838290
838291
838292
838334
036679
036681
036682
036683
036684
036685
036686
036687
036688
036689
036690
036691
036692
036693
036694
036695
036696
036697
036698
036699
236002
036700
036701
036702
036703
036704
036705
0.750
0.820
0.810
1.000
1.025
1.160
1.180
1.200
1.305
1.255
1.305
1.375
1.430
1.415
1.375
1.505
1.535
1.540
1.535
1.535
1.990
1.990
1.990
1.990
1.977
1.750
1.880
0.675
0.840
0.840
1.050
1.050
1.315
1.315
1.315
1.660
1.660
1.660
1.900
1.900
1.900
1.900
2.375
2.375
2.375
2.375
2.375
2.875
2.875
2.875
2.875
2.875
2.875
3.500
0.302
0.302
0.423
0.302
0.526
0.423
0.526
0.722
0.526
0.722
0.936
0.526
0.722
0.936
1.255
0.526
0.722
0.936
1.255
1.476
0.526
0.722
0.936
1.255
1.476
1.913
0.722
0.960
1.015
1.010
1.230
1.345
1.410
1.500
1.500
1.680
1.645
1.685
1.755
1.815
1.805
1.776
1.880
1.925
1.915
1.920
1.920
2.380
2.380
2.380
2.380
2.400
1.955
2.270
0.795
0.880
0.890
1.200
1.375
1.500
1.685
1.685
2.065
2.075
2.065
2.260
2.325
2.320
2.260
2.810
2.760
2.755
2.755
2.755
3.110
3.110
3.110
3.110
3.110
3.190
3.740
0.600
0.570
0.595
0.705
0.775
0.590
0.765
0.775
0.805
0.690
0.810
0.685
0.810
1.010
0.900
0.685
0.805
0.995
0.995
0.995
0.760
0.840
1.030
1.045
1.045
1.000
0.720
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
REDUCING BUSHINGS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C M D1 D2 Q T
3 x 1
3 x 1-¼
3 x 1-½
3 x 2
3 x 2-½
4 x 2
4 x 2-½
4 x 3
6 x 2
6 x 3
6 x 4
838335
838336
838337
838338
838339
838420
838421
838422
838528
838530
838532
036706
036707
036708
036709
036710
036711
036712
036713
036714
036715
036716
1.980
1.965
1.995
1.870
1.750
2.280
2.260
2.330
3.485
3.470
3.500
3.500
3.500
3.500
3.500
3.500
4.500
4.500
4.500
6.625
6.625
6.625
0.936
1.255
1.476
1.913
2.290
1.913
2.290
2.864
1.913
2.864
3.786
2.375
2.350
2.390
2.260
2.095
2.655
2.640
2.655
4.000
4.000
4.000
3.740
3.970
3.720
3.720
3.845
4.900
4.730
4.895
6.845
6.870
6.860
1.045
1.040
1.060
1.060
1.440
1.710
1.560
2.050
1.085
1.670
1.760
90º ELBOWS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D H M
¼ x ¼3⁄8 x 3⁄8
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
2-½x 2-½
3 x 3
4 x 4
6 x 6
8 x 8
10 x 10
12 x 12
806002
806003
806005
806007
806010
809012
806015
806020
806025
806030
806040
806060
806080
806100
806120
036179
036180
036181
036182
036183
036184
036185
036186
036187
036188
036189
036191
036192
036864
036865
0.655
0.780
0.890
1.020
1.145
1.270
1.400
1.525
1.775
1.935
2.265
3.025
4.125
5.500
6.500
0.302
0.423
0.524
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
5.709
7.565
9.493
11.294
1.000
1.250
1.445
1.685
1.940
2.160
2.400
2.805
3.300
3.745
4.625
6.650
8.600
11.315
13.385
0.845
1.000
1.215
1.470
1.760
2.145
2.385
2.955
3.580
4.230
5.345
7.615
9.775
10.780
14.200
Schedule 80
REDUCING BUSHINGS
Spig x FPT Cont.
Schedule 80
90º ELBOWS
Soc x Soc
90º ELBOWS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D G1 G2 M T
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½x 1-½
2 x 2
807005
807007
807010
807012
807015
807020
036172
036173
036174
036175
036176
036177
0.895
1.015
1.155
1.275
1.375
1.530
0.526
0.722
0.936
1.255
1.476
1.913
0.540
0.610
0.785
0.975
1.040
1.375
0.535
0.590
0.785
0.975
1.035
1.470
1.200
1.505
1.760
2.145
2.385
2.955
0.905
1.035
1.150
1.275
1.400
0.970
Schedule 80
90º ELBOWS
Soc x FPT
35
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
90º ELBOWS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D H M T
¼ x ¼3⁄8 x 3⁄8
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
2-½ x 2-½
3 x 3
4 x 4
808002
808003
808005
808007
808010
808012
808015
808020
808025
808030
808040
036197
036198
036199
036200
036201
036202
036203
036204
036205
036206
036207
0.302
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
0.940
1.000
1.370
1.615
1.810
1.795
2.040
2.370
2.935
3.160
3.735
0.845
1.000
1.215
1.470
1.760
2.145
2.385
2.955
3.580
4.230
5.345
0.625
0.625
0.740
0.825
1.130
0.930
0.930
1.095
1.775
1.420
1.495
Schedule 80
90º ELBOWS
FPT x FPT
Note: T=the inside thread depth (bell depth)
45º ELBOWS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D H M
¼ x ¼3⁄8 x 3⁄8
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
2-½ x 2-½
3 x 3
4 x 4
6 x 6
8 x 8
10 x 10
12 x 12
817002
817003
817005
817007
817010
817012
817015
817020
817025
817030
817040
817060
817080
817100
817020
036142
036143
036144
036145
036146
036147
036148
036149
036150
036151
036152
036154
036155
036862
036863
0.655
0.750
0.890
1.020
1.150
1.265
1.385
1.505
1.760
1.885
2.260
3.030
4.040
5.500
6.500
0.302
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
5.709
7.565
9.493
11.294
0.815
0.970
1.200
1.350
1.475
1.660
1.790
2.000
2.480
2.700
3.095
4.575
6.250
8.065
9.580
0.845
1.000
1.215
1.470
1.760
2.145
2.385
2.955
3.580
4.230
5.345
7.615
9.775
10.780
14.200
Schedule 80
45º ELBOWS
Soc x Soc
45º ELBOWS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D K M T
¼ x ¼3⁄8 x 3⁄8
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
2-½ x 2-½
3 x 3
4 x 4
819002
819003
819005
819007
819010
819012
819015
819020
819025
819030
819040
036160
036161
036162
036163
036164
036165
036166
036167
036168
036169
036170
0.302
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
0.780
0.815
0.995
1.195
1.380
1.620
1.810
2.060
2.665
2.990
3.495
0.845
1.000
1.215
1.470
1.760
2.145
2.385
2.955
3.580
4.230
5.345
0.595
0.815
0.675
0.675
0.845
0.895
0.895
0.915
1.455
1.540
1.600
Schedule 80
45º ELBOWS
FPT x FPT
Note: T=the inside thread depth (bell depth)
36
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D H1 H2 M T
½ x ½ x ½
¾ x ¾ x ¾
1 x 1 x 1
2 x 2 x 2
802005
802007
802010
802020
036828
036829
036830
036832
0.905
1.030
1.150
1.500
0.526
0.722
0.936
1.913
1.375
1.615
1.815
2.405
1.375
1.615
1.815
2.405
1.240
1.415
1.750
2.895
0.905
1.030
1.150
0.970
22.5º ELBOWS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D H J M
2 x 2
3 x 3
4 x 4
816020
816030
816040
036134
036135
036136
1.913
2.864
3.786
1.875
2.405
2.875
0.440
0.565
0.625
2.955
4.230
5.345
Schedule 80
22.5º ELBOWS
Soc x Soc
TEES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D H M
¼ x ¼ x ¼3⁄8 x 3⁄8 x 3⁄8
½ x ½ x ½
¾ x ¾ x ¾
1 x 1 x 1
1-¼ x 1-¼ x 1-¼
1-½ x 1-½ x 1-½
2 x 2 x 2
2-½ x 2-½ x 2-½
3 x 3 x 3
4 x 4 x 4
6 x 6 x 6
8 x 8 x 8
10 x 10 x 10
12 x 12 x 12
801002 036768 0.655 0.302 0.970 0.845
801003 036769 0.780 0.423 1.250 0.985
801005 036770 0.895 0.526 1.405 1.240
801007 036771 1.015 0.722 1.595 1.415
801010 036772 1.145 0.936 1.845 1.750
801012 036773 1.270 1.255 2.155 2.350
801015 036774 1.395 1.476 2.410 2.405
801020 036775 1.520 1.913 2.800 2.895
801025 036776 1.775 2.290 3.280 3.570
801030 036777 1.900 2.864 3.720 4.200
801040 036778 2.270 3.786 4.595 5.280
801060 036780 3.030 5.709 6.530 7.575
801080 036781 4.130 7.565 8.625 9.810
801100 036866 5.500 9.493 11.250 12.000
801120 036876 6.500 11.294 13.385 14.200
Schedule 80
TEE
Soc x Soc x Soc
TEES
Schedule 80
TEE
Soc x Soc x FPT
TEES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D H M T
¼ x ¼ x ¼3⁄8 x 3⁄8 x 3⁄8
½ x ½ x ½
¾ x ¾ x ¾
1 x 1 x 1
1-¼ x 1-¼ x 1-¼
1-½ x 1-½ x 1-½
2 x 2 x 2
2-½ x 2-½ x 2-½
3 x 3 x 3
4 x 4 x 4
805002 036817 0.302 0.970 0.845 0.655
805003 036818 0.423 1.030 0.985 0.625
805005 036819 0.526 1.135 1.240 0.905
805007 036820 0.722 1.605 1.415 1.020
805010 036821 0.936 1.815 1.750 1.170
805012 036822 1.255 1.885 2.350 1.000
805015 036823 1.476 2.055 2.405 0.985
805020 036824 1.913 2.370 2.895 1.040
805025 036825 2.290 2.965 3.570 1.450
805030 036826 2.864 3.180 3.200 1.425
805040 036827 3.786 3.720 5.280 1.515
Schedule 80
TEE
FPT x FPT x FPT
37
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C1 C2 C3 D1 D2 D3 H1 H2 H3 M1 M2 M3
801101
801102
-
801126
801130
801131
801157
801167
801168
801210
801211
801247
801248
801249
801251
801338
801339
801420
801422
801530
801532
801585
036786
036787
036790
036791
036788
036789
036792
036793
036794
036795
036796
036797
036798
036799
036800
036802
036803
036804
036805
036807
036808
036810
1.030
1.130
1.300
1.300
1.125
1.315
1.250
1.460
1.280
1.600
1.250
1.405
1.500
1.500
1.530
1.530
1.990
2.260
2.260
2.975
3.025
4.120
1.030
1.130
1.115
1.300
1.125
1.315
1.250
1.460
1.250
1.600
1.250
1.405
1.500
1.500
1.530
1.530
1.530
2.260
2.260
2.975
3.025
4.120
0.890
1.300
1.300
1.130
0.875
1.025
1.000
1.150
0.875
1.150
1.125
1.145
0.875
1.000
1.140
1.380
1.525
1.525
1.910
1.875
2.275
3.060
0.722
0.722
0.936
0.936
0.936
0.936
1.255
1.255
1.255
1.476
1.476
1.913
1.913
1.913
1.913
2.864
2.864
3.786
3.786
5.709
5.709
7.565
0.722
0.722
0.722
0.722
0.936
0.936
0.936
1.255
1.255
1.476
1.476
1.913
1.913
1.913
1.913
2.864
2.864
3.786
3.786
5.709
5.709
7.565
0.526
0.936
0.722
0.936
0.526
0.722
0.722
0.722
0.936
0.722
0.936
0.526
0.722
0.936
1.476
1.913
2.290
1.913
2.864
2.864
3.786
5.709
REDUCING TEES
¾ x ¾ x ½
¾ x ¾ x 1
1 x ¾ x ¾
1 x ¾ x 1
1 x 1 x ½
1 x 1 x ¾
1-¼ x 1 x ¾
1-¼ x 1-¼ x ¾
1-¼ x 1-¼ x 1
1-½ x 1-½ x ¾
1-½ x 1-½ x 1
2 x 2 x ½
2 x 2 x ½
2 x 2 x 1
2 x 2 x 1-½
3 x 3 x 2
3 x 3 x 2-½
4 x 4 x 2
4 x 4 x 3
6 x 6 x 3
6 x 6 x 4
8 x 8 x 6
1.665
1.665
1.880
1.880
1.720
1.930
1.940
2.210
2.155
2.250
2.190
2.305
2.095
2.190
2.400
2.740
3.450
4.460
4.350
5.805
5.825
7.720
1.665
1.665
1.780
1.880
1.720
1.930
1.875
2.210
2.125
2.250
2.125
2.305
2.095
2.190
2.400
2.740
3.450
4.460
4.350
5.805
5.825
7.720
1.465
1.930
1.780
1.780
1.750
1.735
2.065
2.020
2.440
2.210
2.155
2.160
2.315
2.440
2.430
2.660
3.310
4.085
4.220
5.630
5.750
7.625
1.415
1.415
1.750
1.750
1.750
1.750
2.350
2.350
2.350
2.405
2.405
2.895
2.895
2.895
2.895
4.200
4.200
5.280
5.280
7.575
7.575
9.810
1.415
1.415
1.415
1.415
1.750
1.750
1.750
2.350
2.350
2.405
2.405
2.895
2.895
2.895
2.895
4.200
4.200
5.280
5.280
7.575
7.575
9.810
1.240
1.750
1.415
1.750
1.240
1.415
1.415
1.750
1.750
1.415
1.750
1.240
1.415
1.750
2.405
2.895
3.570
2.895
4.200
4.200
5.280
7.575
Imported fi ttings from Aliaxis.
Schedule 80
TEE
Soc x Soc x Soc - reducing
Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D G1 G2 G3 H1 H2 H3 M
WYE
1-½ x 1-½ x 1-½
2 x 2 x 2
3 x 3 x 3
4 x 4 x 4
6 x 6 x 6
8 x 8 x 8
875015
875020
875030
875040
875060
875080
036854
036855
036856
036857
036858
036859
1.476
1.913
2.864
3.786
5.709
7.565
0.690
0.845
1.070
1.320
1.875
7.220
2.375
3.030
4.440
5.675
8.305
15.280
2.405
3.030
3.585
4.600
6.745
15.530
2.065
2.345
2.945
3.570
4.875
11.470
3.750
4.530
6.315
7.925
11.300
19.530
3.750
4.530
5.450
6.850
9.740
19.530
2.345
2.875
4.115
5.190
7.510
9.690
Schedule 80
45º WYE
Soc x Soc x Soc
38
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
Schedule 80
45º WYE
Soc x Soc x Soc - Reducing
Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D1 D2 D3 G1 G2 G3 H1 H2 L M1 M2 M3
REDUCING WYE
875532 036861 5.709 5.709 3.786 2.560 8.000 7.125 6 x 6 x 4 10.250 10.125 12.690 7.605 7.605 5.400
CROSSES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D H J M
½ x ½ x ½ x ½
¾ x ¾ x ¾ x ¾
1 x 1 x 1 x 1
1-¼ x 1-¼ x 1-¼ x 1-¼
1-½ x 1-½ x 1-½ x 1-½
2 x 2 x 2 x 2
2-½ x 2-½ x 2-½ x 2-½
3 x 3 x 3 x 3
4 x 4 x 4 x 4
820005
820007
820010
820012
820015
820020
820025
820030
820040
036116
036117
036118
036119
036120
036121
036122
036123
036124
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
0.565
0.610
0.955
1.095
1.235
1.530
1.750
2.095
2.625
1.470
1.640
2.110
2.375
2.640
3.000
3.440
3.970
4.875
1.510
1.710
2.110
2.440
2.575
3.040
3.350
4.110
5.250
Schedule 80
CROSSES
Soc x Soc X Soc x Soc
39
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
FLANGES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. BHC BHD BHN C D L M R S
½
¾
1
1-¼
1-½
2
2-½
3
4
5
6
8
851005
851007
851010
851012
851015
851020
851025
851030
851040
851050
851060
851080
036223
036224
036225
036226
036227
036228
036229
036230
036231
036232
036233
036234
2.375
2.750
3.125
3.500
3.875
4.750
5.500
6.000
7.500
8.500
9.560
11.705
0.630
0.630
0.630
0.620
0.625
0.745
0.745
0.700
0.745
8.880
0.965
0.880
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
8.000
8.000
8.000
8.000
0.915
1.015
1.135
1.255
1.385
1.525
1.750
1.920
2.240
3.030
3.120
4.000
Schedule 80
FLANGE
One Piece Soc
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
4.768
5.709
7.565
1.090
1.225
1.345
1.465
1.585
1.755
1.960
2.125
2.475
3.250
3.500
4.575
3.500
3.880
4.250
4.620
5.000
6.000
7.000
7.500
9.000
10.175
11.000
13.580
0.470
0.525
0.585
0.650
0.730
0.820
0.900
1.070
1.115
1.040
1.350
1.500
0.000
0.050
0.050
0.050
0.050
0.065
0.065
0.080
0.040
0.040
0.040
0.045
FLANGES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. BHC BHD BHN D L M R T
½
¾
1
1-¼
1-½
2
2-½
3
4
6
Schedule 80
FLANGE
One Piece FPT
852005
852007
852010
852012
852015
852020
852025
852030
852040
852060
036240
036241
036242
036243
036244
036245
036246
036247
036248
036249
2.375
2.750
3.125
3.500
3.875
4.750
5.500
6.000
7.500
9.500
0.640
0.640
0.640
0.625
0.625
0.750
0.750
0.755
0.755
0.880
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
8.000
8.000
0.526
0.722
0.936
1.254
1.476
1.913
2.290
2.864
3.786
5.709
1.010
1.010
1.175
1.215
1.190
1.250
1.585
1.700
1.800
3.500
3.500
3.880
4.250
4.620
5.000
6.000
7.000
7.500
9.000
11.000
0.470
0.525
0.590
0.655
0.735
0.810
0.900
0.900
1.095
1.270
0.805
0.810
0.975
1.010
0.990
1.035
1.355
1.460
1.560
3.050
Note: BHN = Bolt Hole Numbers
Note: BHN = Bolt Hole Numbers
40
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
FLANGES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. BHC BHD BHN C D L M R
1½
2
3
4
6
8
10
12
14
16
Schedule 80
FLANGE
Van Stone Heavy Duty Soc
with Fibre Loc Ring
854015HD
854020HD
854030HD
854040HD
854060HD
854080HD
854100HD
854120HD
854140HD
854160HD
036323
036324
036326
036416
036417
036418
036419
036429
036358
036359
3.870
4.740
6.000
7.500
9.500
11.750
14.250
16.875
18.750
21.250
0.620
0.745
0.700
0.760
0.900
0.895
1.030
0.980
1.085
2.215
4.000
4.000
4.000
8.000
8.000
8.000
12.000
12.000
12.000
16.000
1.410
1.525
1.890
2.295
3.025
4.015
5.250
6.375
6.750
8.000
1.476
1.913
2.864
3.786
5.709
7.565
9.493
11.294
12.412
14.224
1.810
2.010
2.055
2.535
3.200
4.325
5.560
6.710
7.510
8.375
5.000
6.000
7.500
9.000
11.000
13.500
16.000
19.000
21.000
24.000
0.995
1.135
0.895
1.090
1.220
1.500
1.810
1.940
2.750
2.750
FLANGES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. BHC BHD BHN C D L M R
½
¾
1
1-¼
1-½
2
2-½
3
4
5
6
8
10
12
854005
854007
854010
854012
854015
854020
854025
854030
854040
854050
854060
854080
854100
854120
036344
036345
035346
036347
036348
036349
036350
036351
036352
035353
036354
036355
036356
036357
2.380
2.750
3.120
3.500
3.870
4.740
5.500
6.000
7.500
8.500
9.500
11.750
14.250
16.875
0.620
0.620
0.620
0.620
0.620
0.745
0.750
0.700
0.760
0.880
0.900
0.895
1.030
0.980
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
8.000
8.000
8.000
8.000
12.000
12.000
0.870
1.000
1.125
1.250
1.410
1.525
1.760
1.890
2.295
2.650
3.025
4.015
5.250
6.375
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
4.768
5.709
7.565
9.493
11.294
1.040
1.135
1.260
1.390
1.810
2.010
2.005
2.055
2.535
2.980
3.200
4.325
5.560
6.710
3.505
3.880
4.240
4.610
5.000
6.000
6.965
7.500
9.000
9.100
11.000
13.500
16.000
19.000
0.500
0.560
0.645
0.650
0.993
1.135
0.960
0.895
1.090
1.140
1.220
1.500
1.810
1.940
Note: BHN = Bolt Hole Numbers
Note: BHN = Bolt Hole Numbers
Schedule 80
FLANGE
Van Stone Soc with
PVC Ring
41
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
FLANGES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. BHC BHD BHN L M R
½
¾
1
1-¼
1-½
2
2-½
3
4
6
8
853005
853007
853010
853012
853015
853020
853025
853030
853040
853060
853080
036250
036251
036252
036253
036254
036255
036256
036257
036258
036259
036260
2.380
2.765
3.125
3.505
3.895
4.765
5.500
6.015
7.515
9.505
11.755
0.630
0.640
0.645
0.630
0.625
0.750
0.740
0.785
0.785
0.915
0.910
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
0.520
0.590
0.635
0.720
0.820
0.885
0.960
0.960
1.150
1.270
1.560
3.500
3.880
4.250
4.620
5.000
6.000
7.000
7.500
9.000
11.000
13.500
0.470
0.525
0.590
0.660
0.745
0.850
0.900
0.905
1.105
1.220
1.500
FLANGES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. BHC BHD BHN C D L M R
½
¾
1
1-¼
1-½
2
2-½
3
4
6
8
10
12
856005
856007
856010
856012
856015
856020
856025
856030
856040
856060
856080
856100
856120
036374
036375
036376
036377
036378
036379
036380
036381
036382
036383
036384
036995
036996
2.330
2.750
3.120
3.500
3.880
4.750
5.500
6.000
7.500
9.500
11.750
14.250
17.000
0.620
0.620
0.620
0.620
0.620
0.750
0.750
0.750
0.750
0.875
0.875
0.875
0.875
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
8.000
8.000
8.000
12.000
12.000
0.990
1.005
1.140
1.355
1.560
1.525
1.790
1.890
2.290
3.010
4.015
5.750
6.315
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.500
6.625
8.625
10.750
12.750
1.750
1.900
2.130
2.310
2.605
2.825
3.065
3.120
3.660
4.460
5.250
8.000
8.500
3.505
3.870
4.240
4.600
5.040
5.950
6.965
7.500
9.000
11.000
13.500
16.000
19.00
0.500
0.550
0.635
0.655
0.690
0.820
0.955
0.900
1.110
1.220
1.505
1.625
1.625
Note: BHN = Bolt Hole Numbers
Note: BHN = Bolt Hole Numbers
Schedule 80
FLANGE
Van Stone Spig
42
Schedule 80
FLANGE
Blind - One Piece
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
FLANGES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. BHC BHD BHN D L M N OD R
½
¾
1
1-¼
1-½
2
2-½
3
4
855005
855007
855010
855012
855015
855020
855025
855030
855040
036385
036386
036387
036388
036389
036390
036391
036392
036393
2.375
2.750
3.125
3.500
3.875
4.750
5.500
6.000
7.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.750
0.750
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
8.000
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
1.030
1.155
1.250
1.375
1.470
1.565
2.000
2.125
2.065
1.220
1.375
1.750
2.125
2.440
2.970
3.565
4.250
5.250
0.280
0.405
0.315
0.405
0.405
0.500
0.440
0.500
0.375
2.500
3.875
4.250
4.625
5.000
6.000
7.000
7.500
9.000
Note: BHN = Bolt Hole Numbers
Schedule 80
FLANGE
Van Stone FPT
0.530
0.565
0.625
0.690
0.750
0.815
1.000
1.065
1.250
UNIONS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D1 D2 L M N OD T TD TPI
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
3 x 3
4 x 4
Note: TPI = Threads Per Inch
Schedule 80
UNIONS
Soc x FPT - Viton O-Rings
859005
859007
859010
859012
859015
859020
859030
859040
036410
036411
036412
036413
036414
036415
236010
236011
0.526
0.722
0.936
1.255
1.476
1.913
2.864
3.786
0.840
1.050
1.315
1.660
1.900
2.375
3.500
4.500
2.095
2.375
2.565
2.875
3.125
3.625
5.065
5.875
1.200
1.415
1.755
2.160
2.480
2.945
4.255
5.280
0.470
0.565
0.405
0.625
0.845
1.065
1.500
1.875
1.970
2.500
2.875
3.315
3.565
4.190
5.750
7.065
0.750
0.815
1.065
1.000
0.970
0.970
1.625
1.750
0.840
1.050
1.315
1.660
1.900
2.375
3.500
4.500
14.000
14.000
11.500
11.500
11.500
11.500
8.000
8.000
43
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
UNIONS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D L M Q
¼ x ¼3⁄8 x 3⁄8
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
3 x 3
4 x 4
857002
857003
857005
857007
857010
857012
857015
857020
857030
857040
036833
036834
036835
036836
036837
036838
036839
036840
036842
036843
0.625
0.750
0.895
1.010
1.150
1.270
1.385
1.510
1.890
2.250
0.302
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.864
3.786
1.925
2.140
2.305
2.590
2.890
3.385
3.840
4.150
4.970
5.920
0.855
1.000
1.200
1.415
1.755
2.160
2.480
2.945
4.255
5.280
Schedule 80
UNIONS
Soc x Soc - Viton O-Rings
1.650
1.785
1.985
2.370
2.680
3.095
3.835
4.805
6.920
7.125
UNIONS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D L M Q
¼ x ¼3⁄8 x 3⁄8
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
3 x 3
4 x 4
897002
897003
897005
897007
897010
897012
897015
897020
897030
897040
236004
236005
036956
036964
036980
036981
036982
036983
036984
236006
0.625
0.750
0.890
1.015
1.135
1.270
1.385
1.515
1.880
2.250
0.302
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.864
3.786
1.940
2.155
2.310
2.570
2.860
3.395
3.820
4.185
4.955
5.875
0.855
1.000
1.200
1.415
1.755
2.160
2.480
2.945
4.255
5.280
Schedule 80
UNIONS
Soc x Soc - EDPM O-Rings
1.655
1.780
1.980
2.345
2.665
3.085
3.805
4.805
4.010
7.065
UNIONS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D L M Q T
¼ x ¼3⁄8 x 3⁄8
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
3 x 3
4 x 4
858002
858003
858005
858007
858010
858012
858015
858020
858030
858040
036844
036845
036846
036847
036848
036849
036850
036851
036852
036853
0.302
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.864
3.786
1.945
2.145
2.130
2.180
2.645
3.125
3.585
3.890
4.275
5.920
0.855
1.000
1.200
1.415
1.755
2.160
2.480
2.945
4.255
5.280
1.645
1.780
1.975
2.360
2.675
3.100
3.830
4.805
6.945
7.125
Schedule 80
UNIONS
FPT x FPT - Viton O-Rings
0.585
0.600
0.810
0.825
1.020
1.155
1.270
1.380
1.555
2.245
44
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
UNIONS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D L M Q T
¼ x ¼3⁄8 x 3⁄8
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
3 x 3
4 x 4
898002
898003
898005
898007
898010
898012
898015
898020
898030
898040
236007
236008
036985
036986
036987
036988
036989
036990
036993
236009
0.302
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.864
3.786
1.940
2.155
2.115
2.350
2.650
3.105
3.070
3.300
4.260
5.860
0.855
1.000
1.200
1.415
1.755
2.160
2.480
2.945
4.255
5.280
1.655
1.780
1.980
2.290
2.665
3.090
3.810
4.785
6.915
6.980
Schedule 80
UNIONS
FPT x FPT - EDPM O-Rings
0.500
0.500
0.815
0.820
1.015
1.130
1.265
1.395
1.545
1.480
ADAPTERS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D L1 L2 M1 M2 N R
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
3 x 3
4 x 4Schedule 80
ADAPTERS – MISC
Tank - Soc x FPT
871005
871007
871010
871012
871015
871020
871030
871040
036038
036039
036040
036041
036042
036043
036218
036046
0.526
0.722
0.936
1.255
1.476
1.913
2.864
3.786
2.440
2.470
2.815
2.845
2.815
3.250
4.500
4.000
2.905
2.940
3.315
3.405
3.625
4.125
5.500
5.000
1.220
1.625
1.970
2.315
2.690
3.250
4.565
5.500
2.030
2.250
2.625
3.095
3.595
4.875
6.000
7.500
1.500
1.190
1.250
1.530
1.250
1.625
2.190
1.250
0.625
0.625
0.625
0.625
0.625
0.750
1.000
1.250
ADAPTERS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D L1 L2 M1 M2 N R
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
3 x 3
4 x 4
Schedule 80
ADAPTERS – MISC
Tank - FPT x FPT
872005
872007
872010
872012
872015
872020
872030
872040
036047
036048
036049
036050
036051
036052
036053
036055
0.526
0.722
0.936
1.255
1.476
1.913
2.864
3.786
2.190
2.470
2.815
2.845
3.065
3.250
4.500
4.000
2.940
2.940
3.315
3.405
3.595
4.125
5.500
5.000
1.220
1.625
1.970
2.315
2.690
3.250
4.565
5.500
2.030
2.250
2.625
3.095
3.595
4.875
6.000
7.500
1.500
1.500
1.250
1.530
1.690
2.815
2.690
2.000
0.625
0.625
0.625
0.625
0.625
0.750
1.000
1.250
45
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
ADAPTERS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. AF C D L M T
¼ x ¼3⁄8 x 3⁄8
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
2-½ x 2-½
3 x 3
4 x 4
6 x 6
Schedule 80
ADAPTERS
Soc x FPT
835002
835003
835005
835007
835010
835012
835015
835020
835025
835030
835040
835060
036209
036210
036211
036212
036213
036214
036215
036216
036217
036218
036219
036221
0.820
1.000
1.385
1.630
1.955
2.385
2.695
3.245
3.830
4.650
5.865
7.590
0.635
0.750
0.890
1.000
1.130
1.270
1.390
1.510
1.770
1.905
2.275
3.005
0.302
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
5.709
1.320
1.460
1.745
1.880
2.180
2.365
2.480
2.655
3.355
3.565
4.035
5.260
0.820
1.000
1.250
1.465
1.780
2.160
2.625
2.950
3.540
4.240
5.340
7.590
0.595
0.610
0.750
0.770
0.950
0.980
0.995
1.030
1.405
1.485
1.590
2.055
ADAPTERS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D L M S
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
2-½ x 2-½
3 x 3
4 x 4Schedule 80
ADAPTERS
Soc x MPT
836005
836007
836010
836012
836015
836020
836025
836030
836040
036420
036421
036422
036423
036424
036425
036426
036427
036428
0.890
1.015
1.140
1.270
1.385
1.515
1.765
1.890
2.270
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
1.890
2.085
2.390
2.610
2.745
2.925
3.510
4.040
4.385
1.250
1.465
1.780
2.160
2.625
2.950
3.540
4.240
5.340
0.755
0.820
0.975
1.020
1.030
1.070
1.410
1.740
1.740
ADAPTERS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. AF D L M N T
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 X 2
3 x 3
4 x 4
Schedule 80
ADAPTERS
Spig x SS Reinforced FPT
878005SR
878007SR
878010SR
878012SR
878015SR
878020SR
878030SR
878040SR
036965
036966
036967
036968
036969
036970
236000
236001
1.395
1.680
2.015
2.170
2.490
3.375
4.285
4.745
0.840
1.050
1.315
1.660
1.900
2.375
3.500
4.500
1.750
1.935
2.250
2.470
2.655
2.815
3.815
4.375
1.220
1.375
1.690
2.065
2.440
3.030
4.280
5.250
0.155
0.190
0.220
0.250
0.280
0.365
0.530
0.625
0.695
0.695
0.890
0.945
0.960
0.990
1.350
1.630
46
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
ADAPTERS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. AF D L M1 M2 N T
½ x ½
¾ x ¾
1 x 1
1-¼ x 1-¼
1-½ x 1-½
2 x 2
2-½ x 2-½
3 x 3
4 x 4
Schedule 80
ADAPTERS
Soc x SS Reinforced FPT
835005SR
835007SR
835010SR
835012SR
835015SR
835020SR
835025SR
835030SR
835040SR
036971
069972
036973
036974
036975
036976
036977
036978
036979
1.390
1.495
2.015
2.440
2.805
3.375
3.600
4.280
5.805
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
1.750
1.875
2.155
2.315
2.440
2.690
3.250
3.500
3.970
1.190
1.405
1.750
2.125
2.405
3.000
3.560
4.250
5.220
1.220
1.375
1.690
2.065
2.440
3.030
3.590
4.280
5.250
0.190
0.125
0.125
0.190
0.220
0.280
0.345
0.220
0.125
0.690
0.750
0.915
0.915
0.915
0.940
1.325
1.445
1.530
NIPPLES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D L
¼ x 7⁄83⁄8 x 1
½ x 1-1⁄8
¾ x 1-3⁄8
1 x 1-½
1-¼ x 1-5⁄8
1-½ x 1-¾
2 x 2
2-½ x 2-½
3 x 2-5⁄8
4 x 2-7⁄8
Schedule 80
NIPPLES
Close
880005
881005
882005
883005
884005
885005
886015
887005
888005
889005
889005
036434
036435
036436
036437
036438
036439
036440
036441
036442
036443
036444
0.302
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
0.875
1.000
1.125
1.375
1.500
1.625
1.750
2.000
2.500
2.625
2.875
47
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
NIPPLES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D1 D2 L1 L2
¼ x 1-½
¼ x 2
¼ x 2-½
¼ x 3
¼ x 3-½
¼ x 4
¼ x 4-½
¼ x 5
¼ x 6
¼ x 8
¼ x 10
¼ x 123⁄8 x 1-½
3⁄8 x 23⁄8 x 2-½
3⁄8 x 33⁄8 x 3-½
3⁄8 x 43⁄8 x 4-½
3⁄8 x 53⁄8 x 63⁄8 x 8
½ x 1-½
½ x 2
½ x 2-½
½ x 3
½ x 3-½
½ x 4
½ x 4-½
½ x 5
½ x 5-½
½ x 6
½ x 8
½ x 10
½ x 12
¾ x 1-½
¾ x 2
¾ x 2-½
¾ x 3
¾ x 3-½
¾ x 4
¾ x 4-½
¾ x 5
¾ x 5-½
¾ x 6
¾ x 8
¾ x 10
¾ x 12
Schedule 80
NIPPLES
Standard
880015
880020
880025
880030
880035
880040
880045
880050
880060
880080
880100
880120
881015
881020
881025
881030
881035
881040
881045
881050
881060
881080
882015
882020
882025
882030
882035
882040
882045
882050
882055
882060
882080
882100
882120
883015
883020
883025
883030
883035
883040
883045
883050
883055
883060
883080
883100
883120
036445
036456
036457
036458
036459
036460
036461
036462
036463
036464
236012
236013
036446
036466
036467
036468
036469
036470
036471
036472
036473
036474
036447
036475
036476
036477
036478
036479
036480
036481
036445
036456
036457
036458
036459
036460
036461
036462
036463
036464
236012
236013
036446
036466
036467
036468
036469
036470
0.302
0.302
0.302
0.302
0.302
0.302
0.302
0.302
0.302
0.302
0.302
0.302
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.526
0.526
0.526
0.526
0.526
0.526
0.526
0.526
0.526
0.526
0.526
0.526
0.526
0.772
0.722
0.722
0.722
0.722
0.722
0.722
0.722
0.722
0.722
0.722
0.722
0.722
0.540
0.540
0.540
0.540
0.540
0.540
0.540
0.540
0.540
0.540
0.540
0.540
0.675
0.675
0.675
0.675
0.675
0.675
0.675
0.675
0.675
0.675
0.840
0.840
0.840
0.840
0.840
0.840
0.840
0.840
0.840
0.840
0.840
0.840
0.840
1.050
1.050
1.050
1.050
1.050
1.050
1.050
1.050
1.050
1.050
1.050
1.050
1.050
1.500
2.000
2.500
3.000
3.500
4.000
4.500
5.000
6.000
8.000
10.000
12.000
1.500
2.000
2.500
3.000
3.500
4.000
4.500
5.000
6.000
8.000
1.500
2.000
2.500
3.000
3.500
4.000
4.500
5.000
5.500
6.000
8.000
10.000
12.000
1.500
2.000
2.500
3.000
3.500
4.000
4.500
5.000
5.500
6.000
8.000
10.000
12.000
0.620
1.120
1.620
2.120
2.620
3.120
3.620
4.120
5.120
7.120
9.120
11.120
0.620
1.120
1.620
2.120
2.620
3.120
3.620
4.120
5.120
7.120
0.440
0.940
1.440
1.940
2.440
2.940
3.440
3.940
4.440
4.940
6.940
8.940
10.940
0.400
0.900
1.400
1.900
2.400
2.900
3.400
3.900
4.400
4.900
6.900
8.900
10.900
Continued
48
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
NIPPLES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D1 D2 L1 L2
1 x 2
1 x 2-½
1 x 3
1x 3-½
1 x 4
1x 4-½
1 x 5
1 x 5-½
1 x 6
1 x 8
1 x 10
1 x 12
1-¼ x 2
1-¼ x 2-½
1-¼ x 3
1-¼ x 3-½
1-¼ x 4
1-¼ x 4-½
1-¼ x 5
1-¼ x 6
1-¼ x 8
1-¼ x 10
1-¼ x 12
1-½ x 2
1-½ x 2-½
1-½ x 3
1-½ x 3-½
1-½ x 4
1-½ x 4-½
1-½ x 5
1-½ x 5-½
1-½ x 6
1-½ x 8
1-½ x 10
1-½ x 12
2 x 2-½
2 x 3
2 x 3-½
2 x 4
2 x 4-½
2 x 5
2 x 5-½
2 x 6
2 x 8
2 x 10
2 x 12
2-½ x 3
2-½ x 4
2-½ x 5
2-½ x 6
2-½ x 8
2-½ x 10
2-½ x 12
Schedule 80
NIPPLES
Standard Cont.
884020
884025
884030
884035
884040
884045
884050
884055
884060
884080
884100
884120
885020
885025
885030
885035
885040
885045
885050
885060
885080
885100
885120
886020
886025
886030
886035
886040
886045
886050
886055
886060
886080
886100
886120
887025
887030
887035
887040
887045
887050
887055
887060
887080
887100
887120
888030
888040
888050
888060
888080
888100
888120
036471
036472
036473
036474
036447
036475
036476
036477
036478
036479
036480
036481
036450
036516
036517
036518
036519
036520
036521
036522
036523
036524
036525
036451
036526
036527
036528
036529
036530
036531
036532
036533
036534
036535
036536
036452
036539
036540
036541
036542
036543
036544
036545
035546
036547
036548
036549
036550
036272
036551
036552
036276
036553
0.936
0.936
0.936
0.936
0.936
0.936
0.936
0.936
0.936
0.936
0.936
0.936
1.255
1.255
1.255
1.255
1.255
1.255
1.255
1.255
1.255
1.255
1.255
1.476
1.476
1.476
1.476
1.476
1.476
1.476
1.476
1.476
1.476
1.476
1.476
1.913
1.913
1.913
1.913
1.913
1.913
1.913
1.913
1.913
1.913
1.913
2.290
2.290
2.290
2.290
2.290
2.290
2.290
1.315
1.315
1.315
1.315
1.315
1.315
1.315
1.315
1.315
1.315
1.315
1.315
1.660
1.660
1.660
1.660
1.660
1.660
1.660
1.660
1.660
1.660
1.660
1.900
1.900
1.900
1.900
1.900
1.900
1.900
1.900
1.900
1.900
1.900
1.900
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.000
2.500
3.000
3.500
4.000
4.500
5.000
5.500
6.000
8.000
10.000
12.000
2.000
2.500
3.000
3.500
4.000
4.500
5.000
6.000
8.000
10.000
12.000
2.000
2.500
3.000
3.500
4.000
4.500
5.000
5.500
6.000
8.000
10.000
12.000
2.500
3.000
3.500
4.000
4.500
5.000
5.500
6.000
8.000
10.000
12.000
3.000
4.000
5.000
6.000
8.000
10.000
12.000
0.640
1.140
1.640
2.140
2.640
3.140
3.640
4.140
4.640
6.640
8.640
10.640
0.580
1.080
1.580
2.080
2.580
3.080
3.580
4.580
6.580
8.580
10.580
0.560
1.060
1.560
2.060
2.560
3.060
3.560
4.060
4.560
6.560
8.560
10.560
0.980
1.480
1.980
2.480
2.980
3.480
3.980
4.480
6.480
8.480
10.480
0.720
1.720
1.800
3.720
5.720
7.150
9.720
Continued
49
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
NIPPLES Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D1 D2 L1 L2
3 x 3
3 x 4
3 x 5
3 x 6
3 x 8
3 x 10
3 x 12
4 x 4
4 x 5
4 x 6
4 x 8
4 x 10
4 x 12
Schedule 80
NIPPLES
Standard Cont.
889030
889040
889050
889060
889080
889100
889120
890040
890050
890060
890080
890100
890120
036554
036555
035556
035557
036558
036559
035560
036562
036563
036564
036565
036566
036567
2.864
2.864
2.864
2.864
2.864
2.864
2.864
3.786
3.786
3.786
3.786
3.786
3.786
3.500
3.500
3.500
3.500
3.500
3.500
3.500
4.500
4.500
4.500
4.500
4.500
4.500
3.000
4.000
5.000
6.000
8.000
10.000
12.000
4.000
5.000
6.000
8.000
10.000
12.000
0.600
1.600
2.600
3.600
5.600
7.600
9.600
1.400
2.400
3.400
5.400
7.400
9.400
CAPS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D M W
¼3⁄8
½
¾
1
1-¼
1-½
2
2-½
3
4
6
8
Schedule 80
CAPS
Soc Cap
847002
847003
847005
847007
847010
847012
847015
847020
847025
847030
847040
847060
847080
036056
035057
036058
036059
036060
036061
036062
036063
036064
036065
036066
036067
036068
0.730
0.870
0.885
1.000
1.125
1.265
1.395
1.510
1.780
1.885
2.285
3.055
5.630
0.300
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
5.709
7.565
0.815
0.970
1.185
1.400
1.750
2.090
2.355
2.855
3.525
4.180
5.250
7.585
9.685
0.940
1.155
1.260
1.360
1.580
1.730
1.930
2.145
2.635
2.850
3.335
4.825
6.495
CAPS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. C D M W
¼3⁄8
½
¾
1
1-¼
1-½
2
2-½
3
4
Schedule 80
CAPS
FPT Cap
848002
848003
848005
848007
848010
848012
848015
848020
848025
848030
848040
036072
036073
036074
036075
036076
036077
036078
036079
036080
036081
036082
0.645
0.750
0.875
1.000
1.125
1.250
1.375
1.500
1.750
1.875
2.250
0.300
0.423
0.526
0.722
0.936
1.255
1.476
1.913
2.290
2.864
3.786
0.905
0.970
1.295
1.520
1.830
2.235
2.490
3.040
3.625
4.305
5.470
0.940
0.905
1.185
1.255
1.490
1.500
1.545
1.710
2.440
2.520
2.880
50
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEM
SCHEDULE 80 & IPEX FITTINGS
FITTINGS
PLUGS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D L T I Q
2
Schedule 80
PLUGS
Spig Plug
849020 036585 2.375 1.875 0.380 1.520
PLUGS Xirtec Critical Dimensions
Nom. Univ. IPEX
Pipe Size Part No. Part No. D L Q S
¼3⁄8
½
¾
1
1-¼
1-½
2
2-½
3
4
6
Schedule 80
PLUGS
MPT Plug
850002
850003
850005
850007
850010
850012
850015
850020
850025
850030
850040
850060
036568
035569
036570
036571
036572
036573
036574
036575
036576
036577
036578
036579
0.540
0.675
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.500
6.625
0.725
0.760
0.975
1.050
1.205
1.435
1.460
1.440
1.970
2.000
2.090
2.085
0.635
0.800
1.120
1.375
1.690
2.055
2.315
2.780
3.120
3.740
4.730
6.850
0.545
0.565
0.720
0.750
0.905
1.005
1.025
1.010
1.570
1.630
1.710
1.565
2.565
51
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Disclaimer
This brochure has been compiled by Paling Industries Sdn Bhd (“the company”) to promote better understanding of the technical aspects of
the Company’s products to assist users in obtaining from them the best possible performance. The brochure is supplied subject to
acknowledgment of the following conditions:
i) The brochure is protected by Copyright and may not be copied or reproduced in any form or by any means in whole or in part without prior
consent in writing by the Company. ii) Product specifications, usage data and advisory information may change from time to time with
advances in research and field experience. The Company reserves the right to make such changes at any time without notice. iii) Correct
usage of the Company’s products involve engineering judgements which cannot be properly made without full knowledge of all the
conditions pertaining to each specific installation. The Company expressly disclaims all and any liability to any person done by any such
person in reliance whether whole or partial upon the whole or any part of the contents of this brochure. iv) No offer to trade, nor nay
conditions of trading, are expressed or implied by the issue or content of this brochure. v) Nothing herein shall override the Company’s
conditions of Sale, which may be obtained from the Registered Office or nay Sales Office of the Company. vi) This brochure is and shall
remain the property of the Company, and shall surrendered on demand to the Company.
PALING INDUSTRIES SDN BHD (11039 V)
Lot 12, Jalan Perusahaan 4, 68100 Batu Caves, Selangor Darul Ehsan, Malaysia.
Tel: 603 - 6189 8333 (General) / 603 - 6189 6389 (Sales)
Fax: +603 6188 3810
Email: [email protected]
Website: www.paling.com.my
Distributed by:
The Water Del ivery System