SX41-3732-00Application System/400
System/36-AS/400Command Cross-Reference
Version 3
SX41-3732-00Application System/400
System/36-AS/400Command Cross-Reference
Version 3
IBM
| First Edition (September 1994)
| This edition applies to the licensed program IBM Operating| System/400, (Program 5763-SS1), Version 3 Release 1| Modification 0, and to all subsequent releases and modifi-| cations until otherwise indicated in new editions. Make| sure you are using the proper edition for the level of the| product. Changes or additions to the text are indicated by| a vertical line (|) to the left of the change or addition.
| The following terms, denoted by an asterisk (*) in this pub-| lication, are trademarks of the IBM Corporation in the| United States or other countries or both: Application| System/400, APPN, AS/400, C/400, DisplayWrite,| FORTRAN/400, IBM, OfficeVision, OfficeVision/400, Oper-| ating System/400, OS/400, PROFS, RPG/400, and 400.| The following terms, denoted by a double asterisk (**) in| this publication, are trademarks of other companies:| RM/COBOL-85 - Ryan McFarland Corporation.
| This publication could contain technical inaccuracies or| typographical errors. This publication may refer to pro-| ducts that are announced but not currently available in| your country. This publication may also refer to products| that have not been announced in your country. IBM| makes no commitment to make available any unan-| nounced products referred to herein. The final decision to| announce any product is based on IBM's business and| technical judgment. A form for reader comments is pro-| vided at the back of this publication. If the form has been| removed, you can mail your comments to: Attn Depart-| ment 245; IBM Corporation; 3605 Highway 52 N;| Rochester, MN 55901-9986 USA. Or you can fax your| comments to:
| United States and Canada: 800+937-3430| Other countries: (+1)+507+253-5192
| If you have access to Internet, you can send your com-| ments electronically to [email protected];| IBMMAIL, to ibmmail(usib56rz).
| Copyright International Business Machines Corpo-| ration 1994. All rights reserved.| Note to U.S. Government Users — Documentation related| to restricted rights — Use, duplication or disclosure is| subject to restrictions set forth in GSA ADP Schedule Con-| tract with IBM Corp.
Contents
Introduction . . . . . . . . . . . . . . . . . . 1Displaying AS/400 Commands Online . . . . . 1
System/36 Commands to AS/400 CommandsCross-Reference . . . . . . . . . . . . . . . 3
System/36 Procedures to AS/400 CommandsCross-Reference . . . . . . . . . . . . . . . 3
System/36 Control Commands to AS/400Commands Cross-Reference . . . . . . . . . 39
System/36 OCL Statements to AS/400Commands Cross-Reference . . . . . . . . . 47
Appendix. AS/400 Control LanguageCommands . . . . . . . . . . . . . . . . . . 53
Copyright IBM Corp. 1994 iii
iv AS/400 System/36-AS/400 Command Cross-Reference
Introduction
This book is designed as a cross-reference to helpusers who are familiar with System/36 system func-tion to determine which AS/400 control language(CL) command performs the same (or similar) func-tion.
Only those commands with equivalent System/36function appear in the cross-reference listing. SomeAS/400 commands provide new function not avail-able on the System/36. A complete list of AS/400commands is contained in Appendix, “AS/400Control Language Commands” on page 53.Detailed information about the function of AS/400commands is available in the CL Reference.
Displaying AS/400 Commands OnlineTo display a specific command, type the commandname on the command line and press F4 to see thecommand prompt for parameters.
There are several ways to display lists of com-mands:
� Press F4 on a blank command line to see theMajor Command Groups menu. The MajorCommand Groups menu lists commands ingeneral groups. For example, a group mayconsist of commands grouped by subjectmatter, by the action performed, or alphabet-ically by name.
� Type GO CMDxxx on the command line andpress Enter to display a menu of commandsrelating to xxx. There are many CMDxxx menuson the AS/400 system.
– xxx may be the verb part of the command.For example, type GO CMDCRT on the
Copyright IBM Corp. 1994 1
command line and press Enter to display amenu of all create (CRT) commands.
– xxx may also be the noun part of thecommand. For example, type GO CMDLIBon the command line and press Enter todisplay a menu showing all library com-mands.
� Select Command (SLTCMD) displays a menu ofrelated commands. For example, typeSLTCMD xxx\ on the command line and pressEnter to display a menu of commands relatingto xxx. In this example, xxx is the verb part ofthe command. For example, SLTCMD CRT\ dis-plays all Create (CRT) commands. SLTCMD DL\displays all commands beginning with DL.
To display online help for a CL command, press theHelp key. Online help for a command can also bedisplayed by pressing F11 in any help display.Type the command name on the Search Help Indexdisplay screen and press Enter. The help informa-tion can then be displayed or printed.
2 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 Commands to AS/400Commands Cross-Reference
System/36 procedures, control commands, and OCLstatements are listed alphabetically, with cross-references to AS/400* commands, beginning on thefollowing pages:
System/36 procedures Page 3System/36 control commands Page 39System/36 OCL statements Page 47
System/36 Procedures to AS/400Commands Cross-ReferenceThe first column lists the System/36 commands inalphabetic order. The second column lists theAS/400 commands with the same (or similar) func-tion followed by a brief description of the AS/400function.
System/36 AS/400 AS/400 Function#STRTUP1 ADDAJE Adds an autostart job entry to
an existing subsystemdescription
WRKSBSD Allows you to work with a listof subsystem descriptions
#STRTUP2 ADDAJE Adds an autostart job entry toan existing subsystemdescription
WRKSBSD Allows you to work with a listof subsystem descriptions
ALERT CHGMSGD Changes an existing messagedescription stored in a speci-fied message file
ALOCFLDR RGZDLO Allows a user to reorganizedocument library objects
ALOCLIBR None Function not supported or nolonger required on the AS/400system
Copyright IBM Corp. 1994 3
PROCEDURES
System/36 AS/400 AS/400 FunctionALTERCOM GO
CFGCMNShows the Configure Commu-nications display (morecommand mapping information
| can be found in the System/36| Migration book)
APAR CRTAPAR Records data on tape,diskette, or a save file on diskto submit with an authorizedprogram analysis report(APAR)
APPNINFO DSPAPPNINF Displays or prints APPN*network information
ARCHIVE SAVDLO Saves the specified docu-ments or folders to tape,diskette, or a save file on disk
ASM None Function not supported or nolonger required on the AS/400system
AUTOC CRTRPTPGM Creates (compiles) RPG withautomatic report specifications
BALPRINT None Function not supported or nolonger required on the AS/400system
BASIC STRBAS Starts a BASIC session
BASICP STRBASPRC Starts running a BASIC proce-dure saved as a source filemember
BASICR CALL Calls a specified program andpasses control to it
BASICS CRTBASPGM Creates (compiles) a BASICprogram
BGUATTR STRBGU Starts the Business GraphicsUtility (BGU) licensed program
BGUCHART DSPCHT Displays an existing chartdefined by the BusinessGraphics Utility (BGU) licensedprogram
DSPGDF Displays, prints, or plots agraphics data file
STRBGU Starts the Business GraphicsUtility (BGU) licensed program
4 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionBGUDATA STRBGU Starts the Business Graphics
Utility (BGU) licensed program
BGUGRAPH DSPGDF Displays, prints, or plots agraphics data file
DSPCHT Displays an existing chartdefined by the BusinessGraphics Utility (BGU) licensedprogram
STRBGU Starts the Business GraphicsUtility (BGU) licensed program
BLDFILE CRTPF Creates a physical file
BLDGRAPH CRTGDF Creates a graphics data filefrom a chart format and a datafile
STRBGU Starts the Business GraphicsUtility (BGU) licensed program
BLDINDEX CRTLF Creates a logical file
BLDLIBR CRTLIB Creates a user library
CRTSRCPF Creates a database file tocontain source statements
BLDMENU CRTMNU Creates either a display file orprogram menu
CRTMSGFMNU Creates a menu from specifiedmessage files
CRTS36MNU Creates a menu (display fileand command message file)from the user's sourcemembers
BUILD None Function not supported or nolonger required on the AS/400system
CACHE None Function not supported or nolonger required on the AS/400system
CATALOG DSPDKT Displays the volume label andthe data file identifier on adiskette
DSPFD Displays the informationretrieved from a file descriptionof a database
AS/400 Command Cross-Reference 5
PROCEDURES
System/36 AS/400 AS/400 FunctionDSPFFD Displays or prints field-level
information for one or morefiles in one library or alllibraries that the user canaccess
DSPFLR Displays or prints a list offolders and documents, orcreates a database file con-taining the list
DSPLIB Displays the contents of oneor more libraries
DSPOBJD Displays the names and attri-butes of specified objects in aspecified library
DSPTAP Displays the volume label anddata file label information on atape
CGU STRCGU Starts the Character GeneratorUtility (CGU) function
CHGXLATE None Function not supported or nolonger required on the AS/400system
CHNGEMEM RNMOBJ Renames a specified objectname and object type
RNMM Renames a specified filemember
CNFIGICF GOCFGCMN
Shows the Configure Commu-nications display (morecommand mapping information
| can be found in the System/36| Migration book)
CNFIGSSP CRTDEVxxxx Creates a device descriptionwhere xxxx is the device classor type
CHGDEVxxxx Changes a device descriptionwhere xxxx is the device classor type
CFGRPDS Configures the RSCS/PROFS*bridge application
CHGCTLxxxx Changes a controllerdescription where xxxx is thecontroller class or type
6 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionCHGLINxxxx Changes a line description
where xxxx is the line class ortype
CHGPRTF Changes one or more of thecharacteristics of the specifiedprinter device files
CRTCTLxxxx Creates a controllerdescription where xxxx is thecontroller class or type
CRTLINxxxx Creates a line descriptionwhere xxxx is the line class ortype
CRTPRTF Creates a printer device file
DLTDEVD Deletes a device description
DLTLIND Deletes a line description
GOLICPGM
Shows the Work with LicensedProgram display
CNFIGX25 GOCFGCMN
Shows the Configure Commu-nications display (morecommand mapping information
| can be found in the System/36| Migration book)
COBOLC CRTCBLPGM Creates (compiles) a COBOLprogram
CRTRMCPGM Allows a user to compile anRM/COBOL-85** sourceprogram into an program thatcan be run in the AS/400 envi-ronment
COBOLONL STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
COBOLP STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
COBSDA STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
AS/400 Command Cross-Reference 7
PROCEDURES
System/36 AS/400 AS/400 FunctionSTRSDA Starts the screen design aid
main menu and allows usersto create or change a displayformat interactively
COBSEU STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
STRSEU Calls the source entry utility(SEU) program and displaysthe main menu
COMPRESS None Function not supported or nolonger required on the AS/400system
CONDENSE None Function not supported or nolonger required on the AS/400system (use RGZDLO to con-dense a folder)
COPYDATA CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device
CRTDUPOBJ Copies one or a group ofobjects from one library toanother
RGZPFM Reorganizes a physical filemember
COPYDIAG DUPDKT Duplicates the contents fromone diskette onto one or moreother diskettes
COPYI1 DUPDKT Duplicates the contents fromone diskette onto one or moreother diskettes
COPYPRT CPYSPLF Copies data records in a spec-ified spooled output file to auser-defined physical databasefile
DSPSPLF Displays the contents of aspecified spooled file
CREATE ADDMSGD Describes a message andstores it in a specifiedmessage file
8 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionCRTMSGF Creates a user-defined
message file
CRTS36MSGF Creates a message file fromthe user's System/36 messagesource member
DATE CHGJOB Changes the attributes of a job
DEFINEID GOCFGCMN
Shows the Configure Commu-nications display (morecommand mapping information
| can be found in the System/36| Migration book)
DEFINEPN GOCFGCMN
Shows the Configure Commu-nications display (morecommand mapping information
| can be found in the System/36| Migration book)
DEFINLOC GOCFGCMN
Shows the Configure Commu-nications display (morecommand mapping information
| can be found in the System/36| Migration book)
DEFINX21 GOCFGCMN
Shows the Configure Commu-nications display (morecommand mapping information
| can be found in the System/36| Migration book)
DEFINX25 GOCFGCMN
Shows the Configure Commu-nications display (morecommand mapping information
| can be found in the System/36| Migration book)
DEFSUBD CRTFLR Creates a folder
DLTDLO Deletes one or all documentsor folders
DELETE DLTDKTLBL Deletes a data file identifierfrom a diskette
DLTDLO Deletes one or all documentsor folders
DLTDTADCT Deletes a data dictionary
DLTF Deletes a specified databaseor device files
AS/400 Command Cross-Reference 9
PROCEDURES
System/36 AS/400 AS/400 FunctionDLTLIB Deletes a specified library after
all objects in the library aredeleted or moved
WRKOBJ Allows a user to work withobjects
DELNRD WRKDDMF Displays a list of DDM files,which allows you to change,delete, create, and do otherwork with DDM files
DFA DMPCLPGM Dumps all variables declaredin a CL program and all mes-sages in the program'smessage queue to a spooledprinter file
DMPDLO Dumps the contents and/orattributes, or both, of folders,documents, or internal docu-ment library system objects toa printer file
DMPJOB Dumps the basic data struc-tures or specific calls of thecurrent job or the job beingserviced
DMPJOBINT Dumps the machine internaldata related to the current job
DMPOBJ Dumps the contents and/orattributes of a specified objectstored in a library to a spooledprinter file
DMPSYSOBJ Dumps the contents, attri-butes, or both, of any object, ageneric group of objects, or allobjects to a spooled printer file
DMPTAP Dumps label information, datablocks, or both, from labeledor unlabeled tapes to aspooled printer file
DMPTRC Dumps the performance datafrom the trace table to a data-base file
PRTINTDTA Prints the dump file copiedfrom DMPJOBINT command
10 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionSTRSST Starts system service tools by
showing the System ServiceTools main menu
DFU STRDFU Starts the Data File Utility(DFU) program
STRPGMMNU Starts the programmer menu
DISABLE VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object
DOCCNV None Function not supported or nolonger required on the AS/400system
DSU STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
STRPGMMNU Starts the programmer menu
STRSEU Calls the source entry utility(SEU) program and displaysthe main menu
WRKMBRPDM Allows you to work with lists ofmembers
DUMP DMPCLPGM Dumps all variables declaredin a CL program and all mes-sages in the program'smessage queue to a spooledprinter file
DMPDLO Dumps the contents and/orattributes, or both, of folders,documents, or internal docu-ment library system objects toa printer file
DMPJOB Dumps the basic data struc-tures or specific calls of thecurrent job or the job beingserviced
DMPJOBINT Dumps the machine internaldata related to the current job
DMPOBJ Dumps the contents and/orattributes of a specified objectstored in a library to a spooledprinter file
AS/400 Command Cross-Reference 11
PROCEDURES
System/36 AS/400 AS/400 FunctionDMPSYSOBJ Dumps the contents, attri-
butes, or both, of any object, ageneric group of objects, or allobjects to a spooled printer file
DMPTAP Dumps label information, datablocks, or both, from labeledor unlabeled tapes to aspooled printer file
DMPTRC Dumps the performance datafrom the trace table to a data-base file
PRTINTDTA Prints the dump file copiedfrom DMPJOBINT command
STRSST Starts system service tools byshowing the System ServiceTools main menu
EDITNRD CHGDDMF Changes one or more of thevalues in the specified DDMfile
CRTDDMF Creates a distributed datamanagement file to define aremote file to the local system
RNMOBJ Renames a specified objectname and object type
EM3270 ENDPRTEML Ends printer emulation withoutending the job
STREML3270 Starts a 3270 device emulationsession
STRPRTEML Starts 3270 printer emulation
ENABLE VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object
ENTER STRDFU Starts the Data File Utility(DFU) program
CHGDTA Changes, adds, or deletesrecords in an existing data-base file
EPDOWNL STREML3270 Starts a 3270 device emulationsession
12 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionEPLMRG None Function not supported or no
longer required on the AS/400system
EP3270 STREML3270 Starts a 3270 device emulationsession
ERAP STRSST Starts system service tools byshowing the System ServiceTools main menu
ERR SNDBRKMSG Sends a message to one ormore work station messagequeues
SNDPGMMSG Sends a message from aprogram to a user, systemoperator, user profile messagequeue, or all active users
SNDUSRMSG Sends a message from aprogram to a message queueand receives a reply
ES3270 STREML3270 Starts a 3270 device emulationsession
STRPRTEML Starts 3270 printer emulation
FORMAT CRTDSPF Creates a device file to definea display station to the system
CHGDSPF Changes (in the filedescription) one or more of theattributes of the specifieddisplay device file
CRTS36DSPF Creates a display file fromSystem/36 SFGR source
FLIB ADDLIBLE Adds a library name to thelibrary list
CHGCURLIB Changes the current libraryentry of the library list
FORTGO CALL Calls a specified program andpasses control to it
FORTONL STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
AS/400 Command Cross-Reference 13
PROCEDURES
System/36 AS/400 AS/400 FunctionFORTP STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
FORTRANC CRTFTNPGM Compiles a FORTRAN/400*source program into an objectprogram
FORTSDA STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
STRSDA Starts the screen design aidmain menu and allows usersto create or change a displayformat interactively
FORTSEU STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
STRSEU Calls the source entry utility(SEU) program and displaysthe main menu
FROMLIBR CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device
CPYTODKT Copies a database or devicefile to diskette
CPYTOTAP Copies records to a tape filefrom a physical, logical, orspooled inline file, from tape,or from diskette in a specifiedblock format
SAVOBJ Saves objects located in thesame library to tape, diskette,or a save file on disk
SAVS36LIBM Saves a copy of source filemembers on diskette or tape
HELP Replaced Replaced by online help infor-mation for commands
14 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionHISTORY DSPJOBLOG Displays commands and
related job messages
DSPLOG Displays the contents of thehistory log
GOCMDLOG
Displays a menu of commandsrelating to logs
ICFDEBUG TRCICF Traces all ICF functions thatoccur within the job thatentered the command
ICVERIFY None Function not supported or nolonger required on the AS/400system
IDDU STRIDD Starts IDDU
WRKDTADCT Allows a user to work with thecontents of a data dictionary
IDDUDCT CRTDTADCT Creates a data dictionary
WRKDTADCT Allows a user to work with thecontents of a data dictionary
IDDUDFN STRIDD Starts IDDU
DSPDTADCT Displays or prints the contentsof a field, record format, or filedefinition
DSPDBR Displays or prints relationalinformation about databasefiles, record formats, andlibraries
DSPFFD Displays or prints field-levelinformation for one or morefiles in one library or alllibraries that the user canaccess
WRKDTADFN Allows a user to work withdata definitions
IDDUDISK CRTPF Creates a physical file
STRDFU Starts the Data File Utility(DFU) program
WRKDBFIDD Shows the IDDU Work withDatabase Files display whereyou can select an option tocreate physical files or enterdata into a file
IDDULINK STRIDD Starts IDDU
AS/400 Command Cross-Reference 15
PROCEDURES
System/36 AS/400 AS/400 FunctionLNKDTADFN Links or unlinks file definitions
in a dictionary and program-described files
IDDUPRT STRIDD Starts IDDU
DSPFFD Displays or prints field-levelinformation for one or morefiles in one library or alllibraries that the user canaccess
DSPDBR Displays or prints relationalinformation about databasefiles, record formats, andlibraries
DSPDTADCT Displays or prints the contentsof a field, record format, or filedefinition
IDDURBLD None Function not supported or nolonger required on the AS/400system
IDDUXLAT None Function not supported or nolonger required on the AS/400system
INIT CLRDKT Clears all files from a diskette
INZDKT Initializes identification infor-mation and sets the format ona diskette
RNMDKT Changes the volume identifierof a diskette or changes thename of its owner
INITDIAG INZDKT Initializes identification infor-mation and sets the format ona diskette
INIT9332 None Function not supported or nolonger required on the AS/400system
INQUIRY DSPDTA Displays the contents of adatabase physical file undercontrol of a DFU program
STRDFU Starts the Data File Utility(DFU) program
IPL PWRDWNSYS Powers down the system
16 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionITF STRITF Starts sending and receiving
data through different applica-tions
JOBSTR CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device
RSTS36LIBM Reads a file containing librarymembers, creates databasesource or data file memberson the AS/400 system, andcopies the member data fromthe file into each restoredmember
SBMJOB Allows a job that is running tosubmit another job to a jobqueue to be run later as abatch job
CPYFRMDKT Copies one or more files fromdiskette to an output file or toa printer
KEYS GOCMDKBD
Displays a menu of commandsrelating to keyboards
KEYSORT None Function not supported or nolonger required on the AS/400system
LIBRLIBR CPYLIB Copies a library and all of itsobjects to another library
CRTDUPOBJ Copies one or a group ofobjects from one library toanother
CRTSRCPF Creates a database file tocontain source statements
LINES OVRPRTF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed
LIST GOCMDQRY
Displays a menu of commandsrelating to queries
LISTDATA CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device
AS/400 Command Cross-Reference 17
PROCEDURES
System/36 AS/400 AS/400 FunctionCPYFRMDKT Copies one or more files from
diskette to an output file or toa printer
CPYFRMTAP Copies records from a tape fileto a physical file, diskette,tape, or program-describedprinter file
CPYSRCF Copies a database source fileto a physical source file
DSPPFM Displays a physical databasefile member
LISTFILE CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device
CPYFRMDKT Copies one or more files fromdiskette to an output file or toa printer
CPYFRMTAP Copies records from a tape fileto a physical file, diskette,tape, or program-describedprinter file
CPYSRCF Copies records from a tape fileto a physical file, diskette,tape, or program-describedprinter file
DMPTAP Dumps label information, datablocks, or both, from labeledor unlabeled tapes to aspooled printer file
DSPDKT Displays the volume label andthe data file identifier on adiskette
DSPTAP Displays the volume label anddata file label information on atape
LISTLIBR CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device
DSPLIB Displays the contents of oneor more libraries
18 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionDSPOBJD Displays the names and attri-
butes of specified objects in aspecified library
STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
LISTNRD DSPDDMF Displays or prints detailedinformation about the specifiedDDM file
WRKDDMF Displays a list of DDM files,which allows you to change,delete, create, and do otherwork with DDM files
LOG CHGJOB Changes the attributes of a job
CHGSYSVAL Changes the current value ofthe specified system value
CHGJOBD Changes the attributes speci-fied for a job description object
MAINTX25 None Function not supported or nolonger required on the AS/400system
MCSCONV None Function not supported or nolonger required on the AS/400system
MOVEFLDR None Function not supported or nolonger required on the AS/400system
MSGFILE CRTMSGQ Creates a user-definedmessage queue
DLTMSGQ Deletes the specified messagequeue
DSPMSG Displays messages received atthe specified message queue
GOCMDMSG
Displays a menu of commandsrelating to messages
RMVMSG Removes the specifiedmessage or group of mes-sages from the specifiedmessage queue
MSRJE ENDRJESSN Ends a remote job entrysession for a specified session
AS/400 Command Cross-Reference 19
PROCEDURES
System/36 AS/400 AS/400 FunctionGOCMDRJE
Displays a menu of commandsrelating to remote job entry
SBMRJEJOB Submits a remote job entryinput stream to the hostsystem as a batch job
STRRJESSN Starts a remote job entrysession for a specified session
WRKRJESSN Allows a user to work withinformation about an activeremote job entry (RJE) session
NOHALT ADDMSGD Describes a message andstores it in a specifiedmessage file
CHGMSGD Changes an existing messagedescription stored in a speci-fied message file
CHGRPYLE Changes the message ID,comparison data, message, ordump attributes of the reply
DSPMSG Displays messages received atthe specified message queue
DSPMSGD Displays detailed informationabout messages in a messagefile
MONMSG Monitors the messages sent tothe program message queue
WRKRPYLE Allows a user to work withreply entries currently in thesystem message reply list
OFCBPRT STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively
OFCCAL STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively
OFCCANCL ENDSBS Ends the processing in a spec-ified subsystem or all subsys-tems
OFCCOMM None Function not supported or nolonger required on the AS/400system
20 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionCFGDSTSRV Changes the configuration of
the distribution network
OFCDATA SAVOBJ Saves objects located in thesame library to tape, diskette,or a save file on disk
SAVLIB Saves libraries to tape,diskette, or a save file on disk
SAVDLO Saves the specified docu-ments or folders to tape,diskette, or a save file on disk
RGZPFM Reorganizes a physical filemember
OFCDFLT STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively
OFCDIR WRKDIR Allows user to work interac-tively with a set of displays toview, add, change, andremove entries in the systemdirectory
OFCFILE WRKDOC Allows a user to work with theword processing function
OFCGRP WRKDSTL Allows a user to work with dis-tribution lists
OFCINSTL RSTLICPGM Restores an IBM licensedprogram from tape for initialinstallation or new releaseinstallation
OFCLDF STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively
OFCMAIL STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively
OFCMAINT CFGDSTSRV Changes the configuration ofthe distribution network
OFCMSG SNDMSG Sends a message from oneuser to one or more messagequeues
STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively
AS/400 Command Cross-Reference 21
PROCEDURES
System/36 AS/400 AS/400 FunctionOFCQ WRKDSTQ Allows the user to work with
distribution requests on thedistribution queues
WRKDOCPRTQ Allows the user to work withthe word processing function
OFCSRCH STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively
OFCSTAT STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively
OFCUSER STROFC Starts OfficeVision/400* whichallows the user to do officefunctions interactively
OLINK None Function not supported or nolonger required on the AS/400system
ORGANIZE CPYF Copies all or part of a file fromthe database or externaldevice to the database oranother external device
RGZPFM Reorganizes a physical filemember
PASSTHRU STRPASTHR Starts a pass-through sessionand allows the user to sign ona remote system as if the userwere locally attached
PASSWORD CHGDSTPWD Changes the passwordshipped with the system forthe security officer user profile(QSECOFR)
CHGPRF Changes the values of a user'sprofile
CHGPWD Changes a user's password
CHGUSRPRF Changes the values specifiedin a user profile
PATCH DMPOBJ Dumps the contents and/orattributes of a specified objectstored in a library to a spooledprinter file
22 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionDMPSYSOBJ Dumps the contents, attri-
butes, or both, of any object, ageneric group of objects, or allobjects to a spooled printer file
STRSST Starts system service tools byshowing the System ServiceTools main menu
PCEXCH None Function not supported or nolonger required on the AS/400system
PCEXEC STRPCCMD Starts a single PC applicationor DOS command on the per-sonal computer
PCOPROF CHGPCOPRF Allows you to specify if youwant to use DisplayWrite* 4 orOfficeVision/400* as your texteditor
MENUPCOMNU
GOPCOMNU
Shows the AS/400 PC SupportOrganizer display
PCU CVTTOFLR Converts a virtual disk into afolder and PC documents
CPYFRMPCD Copies the data from a PCdocument into a physical data-base file on the AS/400system
CPYTOPCD Copies the contents of amember from a physical data-base file on the AS/400system to a PC document in afolder
POST GOCMDCPY
Displays a menu of commandsrelating to copying
PRINT CHGDEVxxxx Changes a device descriptionwhere xxxx is the device classor type
CHGJOB Changes the attributes of a job
CHGUSRPRF Changes the values specifiedin a user profile
CRTPRTF Creates a printer device file
AS/400 Command Cross-Reference 23
PROCEDURES
System/36 AS/400 AS/400 FunctionOVRPRTF Overrides the file named, over-
rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed
PRINTKEY CHGDEVxxxx Changes a device descriptionwhere xxxx is the device classor type
CHGUSRPRF Changes the values specifiedin a user profile
CHGJOB Changes the attributes of a job
PROBLEM ANZPRB Shows the Analyze Problemsmenu, and allows the user toanalyze or report problems notdetected by the system
DSPPRB Displays or prints service-related information for hard-ware or programming
WRKPRB Allows a user to work with theproblems that were detectedby the system or by the user
PRTGRAPH DSPGDF Displays, prints, or plots agraphics data file
STRBGU Starts the Business GraphicsUtility (BGU) licensed program
PTF APYPTF Applies PTFs to a specifiedlicensed program
DSPPTF Displays or prints the programtemporary fixes for a specifiedlicensed program
LODPTF Loads program temporaryfixes for a specified licensedprogram from the servicesupport system, tape, diskette,or a save file on disk
RMVPTF Removes a program tempo-rary fix from a specifiedlicensed program
QRY GOCMDQRY
Displays a menu of commandsrelating to queries
STRQRY Starts the Query function byshowing the Query main menu
24 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionWRKQRY Allows you to work with a
query definition and to run aquery
QRYDE STRDFU Starts the Data File Utility(DFU) program
STRQRY Starts the Query function byshowing the Query main menu
UPDDTA Creates and runs a temporarydata file utility (DFU) program,which allows you to update adatabase file
QRYRUN RUNQRY Runs an existing query or adefault query if only the filename is specified
STRQRY Starts the Query function byshowing the Query main menu
WRKQRY Allows you to work with aquery definition and to run aquery
READINFO DSPDOC Allows the user to display adocument using the word pro-cessing function of theOfficeVision/400 program
REMOVE DLTF Deletes a specified databaseor device files
DLTMSGF Deletes the specified messagefile including messagedescriptions stored in the file
DLTPGM Deletes a compiled program orgroup of programs
RMVM Removes the specifiedmember from a specified phys-ical or logical file
RENAME RNMDLO Changes the name of a docu-ment or folder
RNMOBJ Renames a specified objectname and object type
CLRMSGQ Clears all messages from aspecified message queue
REQUESTX None Function not supported or nolonger required on the AS/400system
AS/400 Command Cross-Reference 25
PROCEDURES
System/36 AS/400 AS/400 FunctionRESPONSE ADDMSGD Describes a message and
stores it in a specifiedmessage file
ADDRPYLE Adds a message entry to thesystem-wide automaticmessage reply list
CHGMSGD Changes an existing messagedescription stored in a speci-fied message file
CHGRPYLE Changes the message ID,comparison data, message, ordump attributes of the reply
MONMSG Monitors the messages sent tothe program message queue
RMVMSGD Removes a messagedescription from a specifiedmessage file
WRKRPYLE Allows a user to work withreply entries currently in thesystem message reply list
RESTEXTN CPYIGCTBL Copies part or all of a double-byte character set font tablefrom system storage to tape ordiskette, or from tape ordiskette into system storage
RESTFLDR RSTDLO Restores filed documents, dis-tribution documents, andfolders from tape, diskette, ora save file on disk
RSTLIB Restores user libraries savedto tape, diskette, or a save fileon disk
RESTLIBR RSTLIB Restores user libraries savedto tape, diskette, or a save fileon disk
RSTS36LIBM Reads a file containing librarymembers, creates databasesource or data file memberson the AS/400 system, andcopies the member data fromthe file into each restoredmember
26 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionRESTNRD RSTLIB Restores user libraries saved
to tape, diskette, or a save fileon disk
RSTOBJ Restores objects to a singlelibrary saved from tape,diskette, or a save file on disk
RESTORE RSTOBJ Restores objects to a singlelibrary saved from tape,diskette, or a save file on disk
RSTS36F Reads a file, (optionally)creates a database physical orlogical file (if it does notalready exist), and copies anydata into the file
RETRIEVE RSTDLO Restores filed documents, dis-tribution documents, andfolders from tape, diskette, ora save file on disk
RJFILE CVTRJEDTA Converts compressed AS/400system database files todecompressed database fileswritten either to another data-base or to AS/400 systemprinter device files
STRRJERDR Starts reading a remote jobentry (RJE) file
RJTABLE ADDFCTE Adds a forms entry to anexisting forms control table
CRTFCT Creates a forms control tablewith no entries
CRTFORMDF Creates a form definition froma physical file
ROLLKEYS CHGPRF Changes the values of a user'sprofile
CHGUSRPRF Changes the values specifiedin a user profile
SETKBDMAP Sets new key assignments forthe Program Attention (PA)and Program Function (PF)keys
RPGC CRTRPGPGM Creates (compiles) an autoreport RPG program
RPGONL STRPGMMNU Starts the programmer menu
AS/400 Command Cross-Reference 27
PROCEDURES
System/36 AS/400 AS/400 FunctionSTRPDM Calls the Programming Devel-
opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
RPGP STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
STRPGMMNU Starts the programmer menu
RPGR STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
RPGSDA STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
STRSDA Starts the screen design aidmain menu and allows usersto create or change a displayformat interactively
RPGSEU STRPDM Calls the Programming Devel-opment Manager (PDM) utility,which allows you to work withlibraries, objects, members,and user-defined options
STRSEU Calls the source entry utility(SEU) program and displaysthe main menu
RPGX CRTRPGPGM Creates (compiles) an autoreport RPG program
SAVE SAVOBJ Saves objects located in thesame library to tape, diskette,or a save file on disk
SAVSTG Saves the licensed internalcode and the contents of auxil-iary storage to tape
28 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionSAVS36F Creates a copy of a database
physical or logical file todiskette or tape magneticmedia that can be restored ona System/36 or to a physicalfile that can be sent to aSystem/36
SAVEEXTN CPYIGCTBL Copies part or all of a double-byte character set font tablefrom system storage to tape ordiskette, or from tape ordiskette into system storage
SAVEFLDR SAVDLO Saves the specified docu-ments or folders to tape,diskette, or a save file on disk
SAVLIB Saves libraries to tape,diskette, or a save file on disk
SAVSECDTA Saves all security informationto tape, diskette, or save fileon disk
SAVELIBR SAVLIB Saves libraries to tape,diskette, or a save file on disk
SAVS36LIBM Saves a copy of source filemembers on diskette or tape
SAVENRD SAVCHGOBJ Saves a changed object orgroup of objects located in thesame library to tape, diskette,or a save file on disk
SAVLIB Saves libraries to tape,diskette, or a save file on disk
SAVOBJ Saves objects located in thesame library to tape, diskette,or a save file on disk
SAVSTG Saves the licensed internalcode and the contents of auxil-iary storage to tape
SDA STRSDA Starts the screen design aidmain menu and allows usersto create or change a displayformat interactively
SECDEF CHGSYSVAL Changes the current value ofthe specified system value
SECEDIT CHGAUTLE Changes user's authority or anauthorization list
AS/400 Command Cross-Reference 29
PROCEDURES
System/36 AS/400 AS/400 FunctionCHGCFGL Changes a configuration list
CHGDLOAUT Changes the authority to adocument or folder
CHGDLOOWN Changes ownership of a docu-ment or folder from one userto another
CHGDSTPWD Changes the DedicatedService Tools (DST) password
CHGOBJOWN Transfers ownership of anobject from one user toanother
CHGPRF Changes the values of a user'sprofile
CHGPWD Changes a user's password
CHGUSRPRF Changes the values specifiedin a user profile
CHKPWD Checks the password associ-ated with a user's profile
CRTCFGL Creates a list of remotelocation names and remotelocation identifiers for thespecified communications type
CRTUSRPRF Creates a user profile todescribe a user to the system
DLTAUTHLR Deletes an authority holder foran associated resource
DLTCFGL Deletes a list of remotelocation names and remotelocation identifiers for thespecified communications type
DLTUSRPRF Deletes an individual userprofile or a group profile fromthe system
DSPDLOAUT Displays a list of users andtheir authorities assigned to aspecified document or folder
GRTOBJAUT Grants specific authority for anamed object, a generic groupof objects, or all objects
RMVAUTLE Removes a user from anauthorization list
30 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionRMVDLOAUT Removes a user's specific
authority to a document orfolder
RTVUSRPRF Retrieves values stored andassociated with a user anduses those values in a CLprogram
RTVAUTLE Retrieves the authorities that auser has on an authorizationlist
RVKOBJAUT Deletes specific authorities toan object for a user
RVKUSRPMN Revokes the permission froma user to handle documentsand folders for another user
WRKOBJOWN Allows a user to work with alist of objects owned by aspecified user profile
WRKUSRPRF Allows a user to work with adescription of an existing userprofile
SECLIST CHGCFGL Changes a configuration list
CHGDEVxxxx Changes a device descriptionwhere xxxx is the device classor type
CRTCFGL Creates a list of remotelocation names and remotelocation identifiers for thespecified communications type
CRTDEVxxxx Creates a device descriptionwhere xxxx is the device classor type
DSPAUTHLR Displays all authority holderson the system
DSPAUTLDLO Displays a list of documentsand folders whose security isspecified on the specifiedauthorization list
DSPAUTUSR Displays a list of users andinformation about those userswho are authorized to use thesystem
AS/400 Command Cross-Reference 31
PROCEDURES
System/36 AS/400 AS/400 FunctionDSPDLOAUT Displays a list of users and
their authorities assigned to aspecified document or folder
DSPOBJAUT Displays a list of usersassigned to an object
DSPPGMADP Displays a list of programs thatuse the authority of a specified(owner) user profile or groupprofile
DSPSYSVAL Displays the name and valueof a specified system value
DSPUSRPRF Displays the user profile infor-mation
SECREST RSTAUT Restores authorities that werespecifically assigned to a userprofile
RSTUSRPRF Restores the basic parts of auser profile or a set of userprofiles
SECSAVE SAVSECDTA Saves all security informationto tape, diskette, or save fileon disk
SAVSTG Saves the licensed internalcode and the contents of auxil-iary storage to tape
SAVSYS Saves the licensed internalcode and QSYS library
SERVICE ANZPRB Shows the Analyze Problemsmenu, and allows the user toanalyze or report problems notdetected by the system
STRSST Starts system service tools byshowing the System ServiceTools main menu
SERVLOG ANZPRB Shows the Analyze Problemsmenu, and allows the user toanalyze or report problems notdetected by the system
WRKPRB Allows a user to work with theproblems that were detectedby the system or by the user
32 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionSET CHGDEVxxxx Changes a device description
where xxxx is the device classor type
CHGJOB Changes the attributes of a job
OVRPRTF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed
SETALERT CHGMSGD Changes an existing messagedescription stored in a speci-fied message file
SETCOMM GOCFGCMN
Shows the Configure Commu-nications display (morecommand mapping information
| can be found in the System/36| Migration book)
SETDUMP ADDBKP Adds breakpoints in a programbeing debugged
GOCMDDBG
Displays a menu of commandsrelating to debugging
GOCMDBKP
Displays a menu of commandsrelating to breakpoints
RMVBKP Removes one or more break-points from the program beingdebugged
STRCBLDBG Starts the debugging state-ments from a COBOL program
STRDBG Starts a job in debug mode
SEU STRSEU Calls the source entry utility(SEU) program and displaysthe main menu
SLIB ADDLIBLE Adds a library name to thelibrary list
CHGCURLIB Changes the current libraryentry of the library list
SMF STRPFRT Starts the Performance Toolslicensed program main menu
SMFDATA DSPPFRDTA Displays performance data col-lected
AS/400 Command Cross-Reference 33
PROCEDURES
System/36 AS/400 AS/400 FunctionENDSAM Ends the running environment
defined in the STRSAMcommand
ENDSAMCOL Ends sampling data and writesthe collected sample data in adatabase file member
STRPFRMON Starts a collection of perfor-mance statistics based onspecified values and writes thestatistics to system-supplieddatabase files
STRSAM Periodically samples themachine interface instructionaddress while running speci-fied programs
STRSAMCOL Starts sample address monitordata collection and collectssample data defined by theSTRSAM command
SMFPRINT PRTRSCRPT Prints a usage report fordevices from data collected bythe OS/400 performancemonitor
PRTSAMDTA Prints a report of the sampleddata collected by theSTRSAMCOL command andrecorded by the ENDSAMCOLcommand
STRPFRT Starts the Performance Toolslicensed program main menu
SMFSTART STRPFRMON Starts a collection of perfor-mance statistics based onspecified values and writes thestatistics to system-supplieddatabase files
SMFSTOP ENDPFRMON Ends collection of performancestatistics
SORT FMTDTA Formats sort file contents
SRTX FMTDTA Formats sort file contents
STARTM VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object
34 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionSTATEST VFYCMN Shows the Verify a Commu-
nications Line display
STOPGRP ENDMOD Ends a single mode or allactive modes for a specificadvanced program-to-programcommunications (APPC)remote location
STOPM VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object
STRTGRP STRMOD Starts a single mode or allmodes currently in use for anAPPC remote location
VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object
SWITCH CHGJOB Changes the attributes of a job
CHGJOBD Changes the attributes speci-fied for a job description object
SYSLIST None Function not supported or nolonger required on the AS/400system
TAPECOPY CPYFRMTAP Copies records from a tape fileto a physical file, diskette,tape, or program-describedprinter file
CPYTOTAP Copies records to a tape filefrom a physical, logical, orspooled inline file, from tape,or from diskette in a specifiedblock format
TAPEINIT INZTAP Initializes tapes for use on thesystem
TAPESTAT DMPTAP Dumps label information, datablocks, or both, from labeledor unlabeled tapes to aspooled printer file
AS/400 Command Cross-Reference 35
PROCEDURES
System/36 AS/400 AS/400 FunctionPRTERRLOG Places a formatted print file of
the data in the machine errorlog in a spooled printer devicefile named QPCSMPRT and isused by IBM service represen-tatives
TEXTCONV None Function not supported or nolonger required on the AS/400system
TEXTDCT CRTSPADCT Creates a user-defined dic-tionary
CHKDOC Checks spelling or performsgrade-level analysis of a docu-ment
TEXTDOC WRKDOC Allows a user to work with theword processing function
CRTDOC Creates a document
EDTDOC Edits a document using theword processing function ofOfficeVision/400
CHKDOC Checks spelling or performsgrade-level analysis of a docu-ment
PRTDOC Prints a document using theword processing function ofOfficeVision/400
TEXTFLDR CRTFLR Creates a folder
DSPFLR Displays or prints a list offolders and documents, orcreates a database file con-taining the list
WRKFLR Allows a user to work withfolders
TEXTOBJ WRKDOC Allows a user to work with theword processing function
TEXTPROF WRKTXTPRF Allows a user to work with textprofiles
TEXTPRTQ WRKOUTQ Allows a user to work with theoverall status of all outputqueues
36 AS/400 System/36-AS/400 Command Cross-Reference
PROCEDURES
System/36 AS/400 AS/400 FunctionWRKDOC Allows a user to work with the
word processing function
CHGOUTQ Changes the attributes of theoutput queue
TEXTREL RLSOUTQ Releases the spooled files thatwere previously held on thespecified output queue
WRKOUTQ Allows a user to work with theoverall status of all outputqueues
TOLIBR RSTOBJ Restores objects to a singlelibrary saved from tape,diskette, or a save file on disk
RSTS36LIBM Reads a file containing librarymembers, creates databasesource or data file memberson the AS/400 system, andcopies the member data fromthe file into each restoredmember
TRACE DSPLOG Displays the contents of thehistory log
STRJOBTRC Starts the tracing function tocollect performance statisticsfor a specified job
STRSST Starts system service tools byshowing the System ServiceTools main menu
TRCCSP Traces a CSP/AE application
TRCICF Traces all ICF functions thatoccur within the job thatentered the command
TRCINT Traces licensed internal codeand writes the data to aspooled printer file, to tape, orto diskette, or holds data ininternal storage
TRCJOB Traces program calls andreturns that occur in thecurrent job or in the job beingserviced by the Start ServiceJob command
AS/400 Command Cross-Reference 37
PROCEDURES
System/36 AS/400 AS/400 FunctionTRANSFER CPYFRMDKT Copies one or more files from
diskette to an output file or toa printer
CPYTODKT Copies a database or devicefile to diskette
TRNMGR CRTLINxxxx Creates a line descriptionwhere xxxx is the line class ortype
CHGLINxxxx Changes a line descriptionwhere xxxx is the line class ortype
VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object
UPDATE CHGDTA Changes, adds, or deletesrecords in an existing data-base file
STRDFU Starts the Data File Utility(DFU) program
STRRMTSPT Creates and varies on all con-figuration objects needed forremote support
ENDRMTSPT Ends remote support
WSU None Function not supported or nolonger required on the AS/400system
WSUTXCR None Function not supported or nolonger required on the AS/400system
WSUTXEX None Function not supported or nolonger required on the AS/400system
WSUTXRV None Function not supported or nolonger required on the AS/400system
38 AS/400 System/36-AS/400 Command Cross-Reference
CONTROL COMMANDS
System/36 Control Commands toAS/400 Commands Cross-Reference
System/36 AS/400 AS/400 FunctionASSIGN(A) None Function not supported or no
longer required on the AS/400system
CANCEL(C)job name
ENDJOB Ends the specified job
CANCEL(C)JOBQ(J)
ENDJOB Ends the specified job
CLRJOBQ Clears all batch jobs that arenot active from the specifiedjob queue
WRKJOBQ Allows a user to work with theoverall status of all job queues
CANCEL(C)PRT(P)
DLTSPLF Deletes a specified spooledfile from the output queue
CLROUTQ Clears spooled files from spec-ified queue
CANCEL(C)SESSION(S)
ENDJOB Ends the specified job
WRKUSRJOB Allows a user to work with alist of all jobs and provides arelease option to start a heldjob
CHANGE(G)COPIES
CHGSPLFA Changes the characteristics ofa spooled output file while it ison the output queue
WRKOUTQ Allows a user to work with theoverall status of all outputqueues
CHANGE(G)DEFER
CHGSPLFA Changes the characteristics ofa spooled output file while it ison the output queue
WRKOUTQ Allows a user to work with theoverall status of all outputqueues
CHANGE(G)FORMS
CHGSPLFA Changes the characteristics ofa spooled output file while it ison the output queue
AS/400 Command Cross-Reference 39
CONTROL COMMANDS
System/36 AS/400 AS/400 FunctionWRKOUTQ Allows a user to work with the
overall status of all outputqueues
CHANGE(G)ID
CHGSPLFA Changes the characteristics ofa spooled output file while it ison the output queue
WRKOUTQ Allows a user to work with theoverall status of all outputqueues
CHANGE(G)JOBQ(J)
CHGJOB Changes the attributes of a job
WRKJOBQ Allows a user to work with theoverall status of all job queues
CHANGE(G)JOBS
CHGJOBQE Changes an existing job queueentry in the specified sub-system description
CHANGE(G)PRT(P)
CHGSPLFA Changes the characteristics ofa spooled output file while it ison the output queue
CHANGE(G)PRTY
CHGJOB Changes the attributes of a job
CHANGE(G)SEP
CHGSPLFA Changes the characteristics ofa spooled output file while it ison the output queue
CHGWTR Changes the form type,number of file separators, andoutput queue attributes of anactive printer writer
CONSOLE CHGMSGQ Changes the characteristics ofa specified message queue
DSPMSG Displays messages received atthe specified message queue
WRKMSGQ Allows a user to work withmessage queues
INFOMSG CHGJOB Changes the attributes of a job
CHGMSGQ Changes the characteristics ofa specified message queue
HOLDJOBQ(J)
HLDJOB Holds a job and prevents itfrom being processed
40 AS/400 System/36-AS/400 Command Cross-Reference
CONTROL COMMANDS
System/36 AS/400 AS/400 FunctionHOLD PRT(P) HLDSPLF Holds the specified output file
from additional processing bya spooling writer
HLDWTR Holds activity of the specifiedspooling writer at the end of arecord, a spooled file, or aprinted page
JOBQ(J) SBMDBJOB Submits from a job that is cur-rently running batch jobs readfrom a database
SBMDKTJOB Submits from a job that is cur-rently running batch jobs readfrom diskette
SBMFNCJOB Submits a batch job to allowfinance application programsto communicate with 4701 or4702 controller application pro-grams
SBMJOB Allows a job that is running tosubmit another job to a jobqueue to be run later as abatch job
SBMNETJOB Submits a batch job stream toa user on another system inthe network
SBMRJEJOB Submits a remote job entryinput stream to the hostsystem as a batch job
MENU GO xxxx Immediately displays a menushowing a group of commands(where xxxx is the name of aspecific group of commands;for example, GO CMDCRTdisplays a menu of all createcommands)
MODE None Function not supported or nolonger required on the AS/400system
MSG DSPMSG Displays messages received atthe specified message queue
SNDMSG Sends a message from oneuser to one or more messagequeues
AS/400 Command Cross-Reference 41
CONTROL COMMANDS
System/36 AS/400 AS/400 FunctionSNDNETMSG Sends a message to a user on
a remote system
SNDPGMMSG Sends a message from aprogram to a user, systemoperator, user profile messagequeue, or all active users
RCVMSG Receives a message sent to amessage queue
SNDBRKMSG Sends a message to one ormore work station messagequeues
SNDUSRMSG Sends a message from aprogram to a message queueand receives a reply
OFF SIGNOFF Ends all interactive jobs orcauses all jobs in a group toend
POWER PWRDWNSYS Powers down the system
ENDSYS Ends all activity on the systemand leaves only the consoleactive
PRTY CHGJOB Changes the attributes of a job
WRKUSRJOB Allows a user to work with alist of all jobs and provides arelease option to start a heldjob
RELEASE(L)JOBQ(J)
RLSJOB Releases a job for processingafter the job was held on thejob queue or was submitted tothe job queue as a held job
WRKJOBQ Allows a user to work with theoverall status of all job queues
WRKUSRJOB Allows a user to work with alist of all jobs and provides arelease option to start a heldjob
RELEASE(L)PRT(P)
RLSSPLF Releases a specified spooledfile being held on an outputqueue for processing by aspooling writer
42 AS/400 System/36-AS/400 Command Cross-Reference
CONTROL COMMANDS
System/36 AS/400 AS/400 FunctionWRKOUTQ Allows a user to work with the
overall status of all outputqueues
WRKWTR Allows a user to work with thestatus of all printers, allwriters, or a specified writer
REPLY DSPMSG Displays messages received atthe specified message queue
RESTART STRPRTWTR Starts a spooling writer thatsends output to a specifiedprinter
ENDWTR Ends the processing by thespecified spooling writer
START JOB RLSJOB Releases a job for processingafter the job was held on thejob queue or was submitted tothe job queue as a held job
WRKUSRJOB Allows a user to work with alist of all jobs and provides arelease option to start a heldjob
STARTJOBQ(J)
CHGJOBQE Changes an existing job queueentry in the specified sub-system description
DSPSBSD Displays subsystemdescription information
RLSJOBQ Releases for processing thejobs previously held
STARTPRT(P)
STRPRTWTR Starts a spooling writer thatsends output to a specifiedprinter
RLSWTR Releases a spooling writer thatwas previously held
RLSOUTQ Releases the spooled files thatwere previously held on thespecified output queue
STARTSERVICE
GOCMDPRBMGT
Displays a menu of commandsrelating to problem manage-ment
STARTSESSION(N) RLSCMNDEV
Releases the communicationscapability of a specified devicethat is being held
AS/400 Command Cross-Reference 43
CONTROL COMMANDS
System/36 AS/400 AS/400 FunctionSTARTSYSTEM(S)
STRSBS Starts the subsystem activity
STARTWORKSTN(W)
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
STATUS(D)ALERT
WRKALR Allows a user to work interac-tively with alerts created by thelocal system or received fromanother system
STATUS(D)APPC(A)
DSPAPPNINFO Displays or prints APPN*network information
DSPMODSTS Displays the status of theAPPC device
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
STATUS(D)COMM(C)
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
STATUS(D)COMCNFIG(H)
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
STATUS(D)JOBQ(J)
WRKJOBQ Allows a user to work with theoverall status of all job queues
WRKSBMJOB Allows a user to work with thestatus of all jobs submitted ata work station
STATUS(D)LINE(L)
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
STATUS(D)MESSAGE(G)
DSPMSG Displays messages received atthe specified message queue
STATUS(D)MSRJE(M)
GOCMDRJE
Displays a menu of commandsrelating to remote job entry
WRKRJESSN Allows a user to work withinformation about an activeremote job entry (RJE) session
STATUS(D)PRT(P)
WRKOUTQ Allows a user to work with theoverall status of all outputqueues
44 AS/400 System/36-AS/400 Command Cross-Reference
CONTROL COMMANDS
System/36 AS/400 AS/400 FunctionSTATUS(D)SESSION(S)
DSPJOB Displays information about jobstatus
WRKJOB Allows you to work with orchange information concerninga job
STATUS(D)SUBSESS(N)
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
WRKACTJOB Allows a user to work interac-tively with performance andstatus information for activejobs in a specified subsystemor all subsystems
STATUS(D)SUBSYS(I)
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
STATUS(D)SYSTASK(T)
WRKACTJOB Allows a user to work interac-tively with performance andstatus information for activejobs in a specified subsystemor all subsystems
WRKUSRJOB Allows a user to work with alist of all jobs and provides arelease option to start a heldjob
STATUS(D)USERS(U)
WRKACTJOB Allows a user to work interac-tively with performance andstatus information for activejobs in a specified subsystemor all subsystems
WRKUSRJOB Allows a user to work with alist of all jobs and provides arelease option to start a heldjob
STATUS(D)WORKSTN(W)
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
STATUS(D)WRT
WRKWTR Allows a user to work with thestatus of all printers, allwriters, or a specified writer
STATUSF(DF)JOBQ(J)
WRKJOBQ Allows a user to work with theoverall status of all job queues
AS/400 Command Cross-Reference 45
CONTROL COMMANDS
System/36 AS/400 AS/400 FunctionWRKSBMJOB Allows a user to work with the
status of all jobs submitted ata work station
STATUSF(DF)PRT(P)
WRKOUTQ Allows a user to work with theoverall status of all outputqueues
STATUSF(DF)USERS(U)
WRKACTJOB Allows a user to work interac-tively with performance andstatus information for activejobs in a specified subsystemor all subsystems
WRKUSRJOB Allows a user to work with alist of all jobs and provides arelease option to start a heldjob
STATUSF(DF)WORKSTN(W)
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
STOP JOBNAME
HLDJOB Holds a job and prevents itfrom being processed
STOPJOBQ(J)
CHGJOBQE Changes an existing job queueentry in the specified sub-system description
DSPSBSD Displays subsystemdescription information
HLDJOBQ Holds processing of all jobs onthe job queue or added to thequeue
STOP PRT(P) ENDWTR Ends the processing by thespecified spooling writer
HLDWTR Holds activity of the specifiedspooling writer at the end of arecord, a spooled file, or aprinted page
HLDOUTQ Holds all currently waitingspooled files and all spooledfiles added to the queue frombeing processed by a spoolingwriter
STOPSERVICE
GOCMDPRBMGT
Displays a menu of commandsrelating to problem manage-ment
46 AS/400 System/36-AS/400 Command Cross-Reference
OCL STATEMENTS
System/36 AS/400 AS/400 FunctionSTOPSESSION(N)
HLDCMNDEV Holds communications to aremote display station, printer,or system
STOPSYSTEM(S)
ENDSBS Ends the processing in a spec-ified subsystem or all subsys-tems
ENDSYS Ends all activity on the systemand leaves only the consoleactive
ENDWTR Ends the processing by thespecified spooling writer
STOPWORKSTN(W)
HLDCMNDEV Holds communications to aremote display station, printer,or system
TIME DSPSYSVAL Displays the name and valueof a specified system value
VARY VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
System/36 OCL Statements to AS/400Commands Cross-Reference
System/36 AS/400 AS/400 Function// ABEND None Function not supported or no
longer required on the AS/400system
// ALLOCATE ALCOBJ Allocates an object or list ofobjects in a routing step forlater use in the routing step
// ATTR CHGJOB Changes the attributes of a job
// CHANGE CHGSPLFA Changes the characteristics ofa spooled output file while it ison the output queue
// CANCEL DLTSPLF Deletes a specified spooledfile from the output queue
AS/400 Command Cross-Reference 47
OCL STATEMENTS
System/36 AS/400 AS/400 Function// COMM OVRICFDEVE Temporarily adds the program
device entry and the remotelocation name to the ICF file,or overrides a program devicewith the specified remotelocation name and attributesfor an ICF file
// COMPILE CRTxxxPGM Creates a program using thecorrect compiler where xxxcould be BAS (BASIC), CBL(COBOL), FTN (FORTRAN),or RPG.
// DATE CHGJOB Changes the attributes of a job
CHGSYSVAL Changes the current value ofthe specified system value
// DEALLOC DLCOBJ Releases the allocations ofspecified objects for the speci-fied lock status
// DEBUG STRDBG Starts a job in debug mode
// EVOKE SBMJOB Allows a job that is running tosubmit another job to a jobqueue to be run later as abatch job
// FILE (Disk) ALCOBJ Allocates an object or list ofobjects in a routing step forlater use in the routing step
OVRDBF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed
// FILEDiskette
OVRDKTF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed
// FILE (Tape) OVRTAPF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed
// FILELIB ADDLIBLE Adds a library name to thelibrary list
48 AS/400 System/36-AS/400 Command Cross-Reference
OCL STATEMENTS
System/36 AS/400 AS/400 FunctionCHGCURLIB Changes the current library
entry of the library list
// FORMS CRTPRTF Creates a printer device file
OVRPRTF Overrides the file named, over-rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed
// IMAGE None Function not supported or nolonger required on the AS/400system
// INCLUDE CALL Calls a specified program andpasses control to it
// INFOMSG CHGJOB Changes the attributes of a job
CHGMSGQ Changes the characteristics ofa specified message queue
// JOBQ SBMJOB Allows a job that is running tosubmit another job to a jobqueue to be run later as abatch job
// LIBRARY CHGCURLIB Changes the current libraryentry of the library list
CHGJOBD Changes the attributes speci-fied for a job description object
CHGLIBL Changes the user portion ofthe current job's library list byreplacing it with the list ofuser-specified libraries
CHGPRF Changes the values of a user'sprofile
CHGUSRPRF Changes the values specifiedin a user profile
// LOAD CALL Calls a specified program andpasses control to it
// LOCAL CHGDTAARA Changes the value of the localdata area, group data area, orspecified data area stored in alibrary
CHGVAR Changes the value of a CLvariable
// LOG CHGJOB Changes the attributes of a job
AS/400 Command Cross-Reference 49
OCL STATEMENTS
System/36 AS/400 AS/400 FunctionCHGJOBD Changes the attributes speci-
fied for a job description object
// MEMBER ADDMSGD Describes a message andstores it in a specifiedmessage file
CRTMSGF Creates a user-definedmessage file
OVRMSGF Overrides a message file usedin a program
SNDPGMMSG Sends a message from aprogram to a user, systemoperator, user profile messagequeue, or all active users
// MENU xxxx GO xxxx Immediately displays a menushowing a group of commands(where xxxx is the name of aspecific group of commands;for example, GO CMDCRTdisplays a menu of all createcommands)
// MSG SNDBRKMSG Sends a message to one ormore work station messagequeues
SNDMSG Sends a message from oneuser to one or more messagequeues
SNDNETMSG Sends a message to a user ona remote system
SNDPGMMSG Sends a message from aprogram to a user, systemoperator, user profile messagequeue, or all active users
SNDUSRMSG Sends a message from aprogram to a message queueand receives a reply
// NOHALT MONMSG Monitors the messages sent tothe program message queue
// OFF SIGNOFF Ends all interactive jobs orcauses all jobs in a group toend
// POWER PWRDWNSYS Powers down the system
50 AS/400 System/36-AS/400 Command Cross-Reference
OCL STATEMENTS
System/36 AS/400 AS/400 Function// PRINTER OVRPRTF Overrides the file named, over-
rides certain parameters ofthat file, or overrides the filenamed and certain parametersof the file that is processed
CHGPRTF Changes one or more of thecharacteristics of the specifiedprinter device files
// PROMPT DCLF Declares one file to a CLprogram
RCVF Used in a CL program toreceive data from a displaydevice or database file
SNDF Used (in a CL program) tosend a record to a displaydevice
SNDRCVF Used (in a CL program) tosend and receive data from adevice being used interactivelyby a user
// REGION None Function not supported or nolonger required on the AS/400system
// RESERVE None Function not supported or nolonger required on the AS/400system
// RUN CALL xxxx Calls a specified program andpasses control to it
// SESSION OVRICFDEVE Temporarily adds the programdevice entry and the remotelocation name to the ICF file,or overrides a program devicewith the specified remotelocation name and attributesfor an ICF file
// STARTPRT(P)
STRPRTWTR Starts a spooling writer thatsends output to a specifiedprinter
RLSWTR Releases a spooling writer thatwas previously held
RLSOUTQ Releases the spooled files thatwere previously held on thespecified output queue
AS/400 Command Cross-Reference 51
OCL STATEMENTS
System/36 AS/400 AS/400 Function// STOPPRT(P)
ENDWTR Ends the processing by thespecified spooling writer
HLDWTR Holds activity of the specifiedspooling writer at the end of arecord, a spooled file, or aprinted page
HLDOUTQ Holds all currently waitingspooled files and all spooledfiles added to the queue frombeing processed by a spoolingwriter
// SWITCH CHGJOB Changes the attributes of a job
CHGJOBD Changes the attributes speci-fied for a job description object
// SYSLIST None Function not supported or nolonger required on the AS/400system
// VARY VRYCFG Varies lines, controllers, ordevices on or off, and opti-mally resets the IOP associ-ated with the specified object
WRKCFGSTS Allows a user to work with line,controller, and device config-uration descriptions
// WAIT DLYJOB Allows your current job to waitfor a specified number ofseconds, or until a specifiedtime of day, before runningresumes
// WORKSTN OVRDSPF Overrides the file named in theprogram, overrides certainparameters of a file used bythe program, or overrides thefile named in the program andcertain parameters of the fileprocessed
52 AS/400 System/36-AS/400 Command Cross-Reference
Appendix. AS/400 ControlLanguage Commands
Following is a complete list of the AS/400 controllanguage (CL) commands showing the commandabbreviations and their descriptive names.
Command Descriptive Name
ADDACC Add Access CodeADDAJE Add Autostart Job EntryADDALRD Add Alert DescriptionADDAUTLE Add Authorization List EntryADDBKP Add BreakpointADDCALITM Add Calendar ItemADDCFGLE Add Configuration List EntriesADDCMNE Add Communications EntryADDCNNLE Add Connection List EntryADDCRSDMNK Add Cross Domain KeyADDDIRE Add Directory EntryADDDLOAUT Add Document Library Object AuthorityADDDSTLE Add Distribution List EntryADDDTADFN Add Data DefinitionADDFCTE Add Forms Control Table EntryADDICFDEVE Add Intersystem Communications Func-
tion Program Device EntryADDJOBQE Add Job Queue EntryADDLFM Add Logical File MemberADDLIBLE Add Library List EntryADDMSGD Add Message DescriptionADDNETJOBE Add Network Job EntryADDOFCENR Add Office EnrollmentADDOSIABSN Add OSI Abstract SyntaxADDOSIADJN Add OSI Adjacent NodeADDOSIAGT Add OSI AgentADDOSIAGTR Add OSI Agent RegistrationADDOSIAPPE Add OSI Application EntityADDOSIAPPM Add OSI Application ModeADDOSIAPPX Add OSI Application ContextADDOSIAUNN Add OSI Authority NicknameADDOSICLPS Add OSI Connectionless-Mode Path SetADDOSICMPS Add OSI Connection-Mode Path SetADDOSIDUAR Add OSI Directory User Agent Registra-
tionADDOSIIX25 Add OSI Inbound X.25 AttributesADDOSILINE Add OSI LineADDOSILINS Add OSI Line SetADDOSIMGR Add OSI Manager
Copyright IBM Corp. 1994 53
Command Descriptive Name
ADDOSIMGRR Add OSI Manager RegistrationADDOSINSAP Add OSI NSAP AddressADDOSIOX25 Add OSI Outbound X.25 AttributesADDOSIQOSM Add OSI X.25 QOS ModeADDOSIRTE Add OSI RouteADDOSISSEL Add OSI Local Service Access Point
SelectorADDOSISUBN Add OSI SubnetworkADDOSITPTM Add OSI Transport ModeADDPFM Add Physical File MemberADDPFRCOL Add Performance CollectionADDPFVLM Add Physical File Variable-Length
MemberADDPGM Add ProgramADDPJE Add Prestart Job EntryADDREXBUF Add REXX BufferADDRJECMNE Add RJE Communications EntryADDRJERDRE Add RJE Reader EntryADDRJEWTRE Add RJE Writer EntryADDRPYLE Add Reply List EntryADDRTGE Add Routing EntryADDSCHIDXE Add Search Index EntryADDSOCE Add Sphere of Control EntryADDTCPLNK Add TCP/IP LinkADDTCPPORT Add TCP/IP Port EntryADDTCPRSI Add TCP/IP Remote System InformationADDTCPRTE Add TCP/IP Route EntryADDTRAINF Add TRLAN Adapter InformationADDTRC Add TraceADDWSE Add Work Station EntryALCOBJ Allocate ObjectANSLIN Answer LineANSQST Answer QuestionsANZACCGRP Analyze Access GroupANZDBF Analyze Database FileANZDBFKEY Analyze Database File KeysANZPFRDTA Analyze Performance DataANZPGM Analyze ProgramANZPRB Analyze ProblemANZQRY Analyze QueryANZS34OCL Analyze System/34 OCLAPYJRNCHG Apply Journaled ChangesAPYPTF Apply Program Temporary FixASKQST Ask QuestionBCHJOB Batch JobCALL Call ProgramCFGDSTSRV Configure Distribution ServicesCFGOSI Configure OSICFGRPDS Configure VM/MVS Bridge
54 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
CFGTCP Configure TCP/IPCHGACGCDE Change Accounting CodeCHGAJE Change Autostart Job EntryCHGALRD Change Alert DescriptionCHGALRTBL Change Alert TableCHGAUTLE Change Authorization List EntryCHGCALAUT Change Calendar AuthorityCHGCFGL Change Configuration ListCHGCLNUP Change CleanupCHGCLS Change ClassCHGCMD Change CommandCHGCMDDFT Change Command DefaultCHGCMNE Change Communications EntryCHGCNNL Change Connection ListCHGCNNLE Change Connection List EntryCHGCOSD Change Class-of-Service DescriptionCHGCRSDMNK Change Cross Domain KeyCHGCSI Change Communications Side InformationCHGCSPPGM Change CSP/AE ProgramCHGCTLAPPC Change Controller Description (APPC)CHGCTLASC Change Controller Description (Async)CHGCTLBSC Change Controller Description (BSC)CHGCTLFNC Change Controller Description (Finance)CHGCTLHOST Change Controller Description (SNA Host)CHGCTLLWS Change Controller Description (Local
Work Station)CHGCTLNET Change Controller Description (Network)CHGCTLRTL Change Controller Description (Retail)CHGCTLRWS Change Controller Description (Remote
Work Station)CHGCTLTAP Change Controller Description (TAPE)CHGCTLVWS Change Controller Description (Virtual
Work Station)CHGCURLIB Change Current LibraryCHGDBG Change DebugCHGDDMF Change Distributed Data Management
FileCHGDEVAPPC Change Device Description (APPC)CHGDEVASC Change Device Description (Async)CHGDEVBSC Change Device Description (BSC)CHGDEVDKT Change Device Description (Diskette)CHGDEVDSP Change Device Description (DisplayCHGDEVFNC Change Device Description (Finance)CHGDEVHOST Change Device Description (SNA Host)CHGDEVINTR Change Device Description (Intrasystem)CHGDEVNET Change Device Description (Network)CHGDEVPRT Change Device Description (Printer)CHGDEVRTL Change Device Description (Retail)CHGDEVSNUF Change Device Description (SNUF)CHGDEVTAP Change Device Description (Tape)
Appendix. AS/400 Control Language Commands 55
Command Descriptive Name
CHGDIRE Change Directory EntryCHGDKTF Change Diskette FileCHGDLOAUT Change Document Library Object
AuthorityCHGDLOOWN Change Document Library Object OwnerCHGDOCD Change Document DescriptionCHGDSPF Change Display FileCHGDSTD Change Distribution DescriptionCHGDSTPWD Change Dedicated Service Tools Pass-
wordCHGDTA Change DataCHGDTAARA Change Data AreaCHGFCNARA Change Functional AreaCHGFCT Change Forms Control TableCHGFCTE Change Forms Control Table EntryCHGGPHFMT Change Graph FormatCHGGPHPKG Change Graph PackageCHGGRPA Change Group AttributesCHGHLLPTR Change High-Level Language PointerCHGICFDEVE Change ICF Program Device EntryCHGICFF Change Intersystem Communications
Function FileCHGJOB Change JobCHGJOBD Change Job DescriptionCHGJOBQE Change Job Queue EntryCHGJRN Change JournalCHGKBDMAP Change Keyboard MapCHGLF Change Logical FileCHGLFM Change Logical File MemberCHGLIB Change LibraryCHGLIBL Change Library ListCHGLINASC Change Line Description (Async)CHGLINBSC Change Line Description (BSC)CHGLINETH Change Line Description (Ethernet)CHGLINIDLC Change Line Description for IDLCCHGLINSDLC Change Line Description (SDLC)CHGLINTDLC Change Line Description (TDLC)CHGLINTRN Change Line Description (Token-Ring
Network)CHGLINX25 Change Line Description (X.25)CHGMNU Change MenuCHGMODD Change Mode DescriptionCHGMSGD Change Message DescriptionCHGMSGQ Change Message QueueCHGMSTK Change Master KeyCHGNETA Change Network AttributesCHGNETJOBE Change Network Job EntryCHGNWIISDN Change Network Interface Description for
ISDN
56 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
CHGOBJD Change Object DescriptionCHGOBJOWN Change Object OwnerCHGOFCENR Change Office EnrollmentCHGOSIABSN Change OSI Abstract SyntaxCHGOSIADJN Change OSI Adjacent NodeCHGOSIAPPE Change OSI Application EntityCHGOSIAPPM Change OSI Application ModeCHGOSIAPPX Change OSI Application ContextCHGOSIAUNN Change OSI Authority NicknameCHGOSICLPS Change OSI Connectionless-Mode Path
SetCHGOSICMPS Change OSI Connection-Mode Path SetCHGOSIDUAR Change OSI Directory User Agent Regis-
trationCHGOSIIX25 Change OSI Inbound X.25 AttributesCHGOSILCLA Change OSI Local AttributesCHGOSILINE Change OSI LineCHGOSILINS Change OSI Line SetCHGOSIMGRR Change OSI Manager RegistrationCHGOSINSAP Change OSI NSAP AddressCHGOSIOX25 Change OSI Outbound X.25 AttributesCHGOSIQOSM Change OSI X.25 QOS ModeCHGOSIRTE Change OSI RouteCHGOSISSEL Change OSI Local Service Access Point
SelectorCHGOSISUBN Change OSI SubnetworkCHGOSITPTM Change OSI Transport ModeCHGOUTQ Change Output QueueCHGPCOPRF Change PC Support Organizer ProfileCHGPDGPRF Change Print Descriptor Group ProfileCHGPF Change Physical FileCHGPFM Change Physical File MemberCHGPFRCOL Change Performance CollectionCHGPGM Change ProgramCHGPGMVAR Change Program VariableCHGPJ Change Prestart JobCHGPJE Change Prestart Job EntryCHGPRB Change ProblemCHGPRF Change ProfileCHGPRTF Change Printer FileCHGPTR Change PointerCHGPWD Change PasswordCHGPWRSCD Change Power On/Off ScheduleCHGPWRSCDE Change Power On/Off Schedule EntryCHGQSTDB Change Question-and-Answer DatabaseCHGRJECMNE Change RJE Communications EntryCHGRJERDRE Change RJE Reader EntryCHGRJEWTRE Change RJE Writer EntryCHGRPYLE Change Reply List EntryCHGRTGE Change Routing Entry
Appendix. AS/400 Control Language Commands 57
Command Descriptive Name
CHGSAVF Change Save FileCHGSBSD Change Subsystem DescriptionCHGSCHIDX Change Search IndexCHGSHRPOOL Change Shared Storage PoolCHGSPLFA Change Spooled File AttributesCHGSRCPF Change Source Physical FileCHGSRVPVDA Change Service Provider AttributesCHGSSND Change Session DescriptionCHGSSNMAX Change Session MaximumCHGSYSLIBL Change System Library ListCHGSYSVAL Change System ValueCHGS34LIBM Change System/34 Library Member(s)CHGS36 Change System/36CHGS36MSGL Change System/36 Message ListCHGS36PGMA Change System/36 Program AttributesCHGS36PRCA Change System/36 Procedure AttributesCHGS36SRCA Change System/36 Source AttributesCHGTAPF Change Tape FileCHGTCPA Change TCP/IP AttributesCHGTCPLNK Change TCP/IP LinkCHGTCPRTE Change TCP/IP Route EntryCHGTRAINF Change TRLAN Adapter InformationCHGUSRPRF Change User ProfileCHGVAR Change VariableCHGWSE Change Work Station EntryCHGWTR Change WriterCHKDKT Check DisketteCHKDLO Check Document Library ObjectCHKDOC Check DocumentCHKIGCTBL Check DBCS Font TableCHKOBJ Check ObjectCHKPWD Check PasswordCHKRCDLCK Check Record LocksCHKTAP Check TapeCLOF Close FileCLRDKT Clear DisketteCLRJOBQ Clear Job QueueCLRLIB Clear LibraryCLRMSGQ Clear Message QueueCLROUTQ Clear Output QueueCLRPFM Clear Physical File MemberCLRRTLF Clear Retail FileCLRSAVF Clear Save FileCLRTRCDTA Clear Trace DataCMPJRNIMG Compare Journal ImagesCNLRJERDR Cancel RJE ReaderCNLRJEWTR Cancel RJE WriterCOMMIT CommitCPHDTA Cipher Data
58 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
CPROBJ Compress ObjectCPYCFGL Copy Configuration ListCPYDOC Copy DocumentCPYF Copy FileCPYFCNARA Copy Functional AreaCPYFRMDKT Copy from DisketteCPYFRMPCD Copy from PC DocumentCPYFRMQRYF Copy From Query FileCPYFRMTAP Copy from TapeCPYGPHFMT Copy Graph FormatCPYGPHPKG Copy Graph PackageCPYIGCSRT Copy IGC SortCPYIGCTBL Copy DBCS Font TableCPYLIB Copy LibraryCPYPFRDTA Copy Performance DataCPYPTF Copy Program Temporary FixCPYPTFSAVF Copy PTF Save FileCPYSPLF Copy Spooled FileCPYSRCF Copy Source FileCPYTODKT Copy to DisketteCPYTOPCD Copy to PC DocumentCPYTOTAP Copy to TapeCRTALRTBL Create Alert TableCRTAPAR Create Authorized Program Analysis
ReportCRTAUTHLR Create Authority HolderCRTAUTL Create Authorization ListCRTBASPGM Create Basic ProgramCRTCAL Create CalendarCRTCBLPGM Create COBOL ProgramCRTCFGL Create Configuration ListCRTCLD Create C Locale DescriptionCRTCLPGM Create Control Language ProgramCRTCLS Create ClassCRTCMD Create CommandCRTCNNL Create Connection ListCRTCOSD Create Class-of-Service DescriptionCRTCPGM Create C/400* ProgramCRTCSI Create Communications Side InformationCRTCSPAPP Create CSP/AE Application ObjectsCRTCSPMSGF Create CSP/AE User Message FileCRTCTLAPPC Create Controller Description (APPC)CRTCTLASC Create Controller Description (Async)CRTCTLBSC Create Controller Description (BSC)CRTCTLFNC Create Controller Description (Finance)CRTCTLHOST Create Controller Description (SNA Host)CRTCTLLWS Create Controller Description (Local Work
Station)CRTCTLNET Create Controller Description (Network)CRTCTLRTL Create Controller Description (Retail)
Appendix. AS/400 Control Language Commands 59
Command Descriptive Name
CRTCTLRWS Create Controller Description (RemoteWork Station)
CRTCTLTAP Create Controller Description (Tape)CRTCTLVWS Create Controller Description (Virtual
Work Station)CRTDDMF Create Distributed Data Management FileCRTDEVAPPC Create Device Description (APPC)CRTDEVASC Create Device Description (Async)CRTDEVBSC Create Device Description (BSC)CRTDEVDKT Create Device Description (Diskette)CRTDEVDSP Create Device Description (Display)CRTDEVFNC Create Device Description (Finance)CRTDEVHOST Create Device Description (SNA Host)CRTDEVINTR Create Device Description (Intrasystem)CRTDEVNET Create Device Description (Network)CRTDEVPRT Create Device Description (Printer)CRTDEVRTL Create Device Description (Retail)CRTDEVSNUF Create Device Description (SNUF)CRTDEVTAP Create Device Description (Tape)CRTDFUDSPF Create DFU Display FileCRTDKTF Create Diskette FileCRTDOC Create DocumentCRTDSPF Create Display FileCRTDSTL Create Distribution ListCRTDTAARA Create Data AreaCRTDTADCT Create a Data DictionaryCRTDTAQ Create Data QueueCRTDUPOBJ Create Duplicate ObjectCRTEDTD Create Edit DescriptionCRTFCNARA Create Functional AreaCRTFCT Create Forms Control TableCRTFLR Create FolderCRTFNTRSC Create Font ResourcesCRTFORMDF Create Form DefinitionCRTFTNPGM Create FORTRAN/400 ProgramCRTGDF Create Graphics Data FileCRTGPHFMT Create Graph FormatCRTGPHPKG Create Graph PackageCRTGSS Create Graphics Symbol SetCRTHSTDTA Create Historical DataCRTICFF Create Intersystem Communications
Function FileCRTIGCDCT Create DBCS Conversion DictionaryCRTJOBD Create Job DescriptionCRTJOBQ Create Job QueueCRTJRN Create JournalCRTJRNRCV Create Journal ReceiverCRTLASREP Create Local Abstract SyntaxCRTLF Create Logical File
60 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
CRTLIB Create LibraryCRTLINASC Create Line Description (Async)CRTLINBSC Create Line Description (BSC)CRTLINETH Create Line Description (Ethernet)CRTLINIDLC Create Line Description for IDLCCRTLINSDLC Create Line Description (SDLC)CRTLINTDLC Create Line Description (TDLC)CRTLINTRN Create Line Description (Token-Ring
Network)CRTLINX25 Create Line Description (X.25)CRTMNU Create MenuCRTMODD Create Mode DescriptionCRTMSGF Create Message FileCRTMSGFMNU Create Message File MenuCRTMSGQ Create Message QueueCRTNWIISDN Create Network Interface for ISDNCRTOUTQ Create Output QueueCRTOVL Create an OverlayCRTPAGDFN Create Page DefinitionCRTPAGSEG Create Page SegmentCRTPASPGM Create Pascal ProgramCRTPDG Create Print Descriptor GroupCRTPF Create Physical FileCRTPLIPGM Create PL/I Language ProgramCRTPNLGRP Create Panel GroupCRTPRTF Create Printer FileCRTQMFORM Create Query Management FormCRTQMQRY Create Query Management QueryCRTQSTDB Create Question and Answer DatabaseCRTQSTLOD Create Question-and-Answer LoadCRTRJEBSCF Create RJE BSC FileCRTRJECFG Create RJE ConfigurationCRTRJECMNF Create RJE Communications FileCRTRMCPGM Create RM/COBOL-85 ProgramCRTRPGPGM Create RPG/400* ProgramCRTRPTPGM Create Auto Report ProgramCRTRTLF Create Retail FileCRTRTLSRC Create Retail SourceCRTSAVF Create Save FileCRTSBSD Create Subsystem DescriptionCRTSCHIDX Create Search IndexCRTSPADCT Create Spelling Aid DictionaryCRTSQLC Create Structured Query Language CCRTSQLCBL Create Structured Query Language
COBOLCRTSQLFTN Create Structured Query Language
FORTRANCRTSQLPLI Create Structured Query Language PL/ICRTSQLRPG Create Structured Query Language RPGCRTSRCPF Create Source Physical File
Appendix. AS/400 Control Language Commands 61
Command Descriptive Name
CRTSSND Create Session DescriptionCRTS36CBL Create System/36 COBOLCRTS36DSPF Create System/36 Display FileCRTS36MNU Create System/36 MenuCRTS36MSGF Create System/36 Message FileCRTS36RPG Create System/36 RPGCRTS36RPGR Create System/36 RPGRCRTS36RPT Create System/36 Auto ReportCRTTAPF Create Tape FileCRTTBL Create TableCRTUSRPRF Create User ProfileCVTBASSTR Convert BASIC Stream FilesCVTBASUNF Convert BASIC Unformatted FilesCVTBGUDTA Convert BGU DataCVTCLSRC Convert CL SourceCVTDAT Convert DateCVTEDU Convert EducationCVTFRMRTLF Convert from Retail FileCVTPFRDTA Convert Performance DataCVTRJEDTA Convert RJE DataCVTS36CFG Convert System/36 ConfigurationCVTS36FCT Convert System/36 Forms Control TableCVTS36JOB Convert System/36 JobCVTS36QRY Convert System/36 QueryCVTS38JOB Convert System/38 JobCVTTOFLR Convert to FolderCVTTORTLF Convert to Retail FileDATA Add Data DefinitionDCL Declare CL VariableDCLF Declare FileDCPOBJ Decompress ObjectDLCOBJ Deallocate ObjectDLTALR Delete AlertDLTALRTBL Delete Alert TableDLTAUTHLR Delete Authority HolderDLTAUTL Delete Authorization ListDLTCAL Delete CalendarDLTCFGL Delete Configuration ListDLTCHTFMT Delete Chart FormatDLTCLD Delete C Locale DescriptionDLTCLS Delete ClassDLTCMD Delete CommandDLTCNNL Delete Connection ListDLTCOSD Delete Class-of Service DescriptionDLTCSI Delete Communications Side InformationDLTCSPMAP Delete CSP/AE Map GroupDLTCSPTBL Delete CSP/AE TableDLTCTLD Delete Controller DescriptionDLTDEVD Delete Device Description
62 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
DLTDFUPGM Delete DFU ProgramDLTDKTLBL Delete Diskette LabelDLTDLO Delete Document Library ObjectDLTDOCL Delete Document ListDLTDST Delete DistributionDLTDSTL Delete Distribution ListDLTDTAARA Delete Data AreaDLTDTADCT Delete Data DictionaryDLTDTAQ Delete Data QueueDLTEDTD Delete Edit DescriptionDLTF Delete FileDLTFCNARA Delete Functional AreaDLTFCT Delete Forms Control TableDLTFNTRSC Delete Font ResourcesDLTFORMDF Delete Form DefinitionDLTGPHFMT Delete Graph FormatDLTGPHPKG Delete Graph PackageDLTGSS Delete Graphics Symbol SetDLTHSTDTA Delete Historical DataDLTIGCDCT Delete DBCS Conversion DictionaryDLTIGCSRT Delete IGC SortDLTIGCTBL Delete DBCS Font TableDLTJOBD Delete Job DescriptionDLTJOBQ Delete Job QueueDLTJRN Delete JournalDLTJRNRCV Delete Journal ReceiverDLTLIB Delete LibraryDLTLICPGM Delete Licensed ProgramDLTLIND Delete Line DescriptionDLTMNU Delete MenuDLTMODD Delete Mode DescriptionDLTMSGF Delete Message FileDLTMSGQ Delete Message QueueDLTNETF Delete Network FileDLTNWID Delete Network Interface DescriptionDLTOUTMAIL Delete Outgoing MailDLTOUTQ Delete Output QueueDLTOVL Delete OverlayDLTOVR Delete OverrideDLTOVRDEVE Delete Override Device EntryDLTPAGDFN Delete Page DefinitionDLTPAGSEG Delete Page SegmentDLTPDG Delete Print Descriptor GroupDLTPFRDTA Delete Performance DataDLTPGM Delete ProgramDLTPNLGRP Delete Panel GroupDLTPRB Delete ProblemDLTPTF Delete PTFDLTQMFORM Delete Query Management FormDLTQMQRY Delete Query Management Query
Appendix. AS/400 Control Language Commands 63
Command Descriptive Name
DLTQRY Delete QueryDLTQST Delete QuestionDLTQSTDB Delete Question-and-Answer DatabaseDLTRJECFG Delete RJE ConfigurationDLTRTLF Delete Retail FileDLTRTLRCD Delete Retail RecordDLTSBSD Delete Subsystem DescriptionDLTSCHIDX Delete Search IndexDLTSPADCT Delete Spelling Aid DictionaryDLTSPLF Delete Spooled FileDLTSSND Delete Session DescriptionDLTTBL Delete TableDLTUSRIDX Delete User IndexDLTUSRPRF Delete User ProfileDLTUSRQ Delete User QueueDLTUSRSPC Delete User SpaceDLYJOB Delay JobDMPCLPGM Dump CL ProgramDMPDLO Dump Document Library ObjectDMPJOB Dump JobDMPJOBINT Dump Job InternalDMPOBJ Dump ObjectDMPSYSOBJ Dump System ObjectDMPTAP Dump TapeDMPTRC Dump TraceDO DoDSCJOB Disconnect JobDSPACC Display Access CodeDSPACCAUT Display Access Code AuthorityDSPACCGRP Display Access GroupDSPACTPJ Display Active Prestart JobsDSPAPPNINF Display APPN InformationDSPAUTHLR Display Authority HolderDSPAUTL Display Authorization ListDSPAUTLDLO Display Authorization List Document
Library ObjectsDSPAUTLOBJ Display Authorization List ObjectsDSPAUTUSR Display Authorized UsersDSPBKP Display BreakpointsDSPCALAUT Display Calendar AuthorityDSPCALD Display Calendar DescriptionDSPCALITM Display Calendar ItemDSPCFGL Display Configuration ListDSPCHT Display ChartDSPCLS Display ClassDSPCMD Display CommandDSPCNNL Display Connection ListDSPCNNSTS Display Connection StatusDSPCOSD Display Class-of-Service Description
64 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
DSPCSI Display Communications Side InformationDSPCSPOBJ Display CSP/AE ObjectDSPCTLD Display Controller DescriptionDSPDBG Display DebugDSPDBR Display Database RelationsDSPDDMF Display Distributed Data Management FileDSPDEVD Display Device DescriptionDSPDIR Display DirectoryDSPDKT Display DisketteDSPDLOAUT Display Document Library Object AuthorityDSPDOC Display DocumentDSPDSTL Display Distribution ListDSPDSTLOG Display Distribution LogDSPDSTSRV Display Distribution ServicesDSPDTA Display DataDSPDTAARA Display Data AreaDSPDTADCT Display Data DictionaryDSPEDTD Display Edit DescriptionDSPFD Display File DescriptionDSPFFD Display File Field DescriptionDSPFLR Display FolderDSPGDF Display Graphics Data FileDSPHDWRSC Display Hardware ResourcesDSPHFS Display Hierarchical File SystemsDSPHLPDOC Display Help DocumentDSPHSTGPH Display Historical GraphDSPIGCDCT Display DBCS Conversion DictionaryDSPJOB Display JobDSPJOBD Display Job DescriptionDSPJOBLOG Display Job LogDSPJRN Display JournalDSPJRNRCVA Display Journal Receiver AttributesDSPKBDMAP Display Keyboard MapDSPLCLHDW Display Local HardwareDSPLIB Display LibraryDSPLIBD Display Library DescriptionDSPLIBL Display Library ListDSPLIND Display Line DescriptionDSPLOG Display LogDSPMNUA Display Menu AttributesDSPMODD Display Mode DescriptionDSPMODSTS Display Mode StatusDSPMSG Display MessagesDSPMSGD Display Message DescriptionsDSPNETA Display Network AttributesDSPNWID Display Network Interface DescriptionDSPOBJAUT Display Object AuthorityDSPOBJD Display Object DescriptionDSPOSIABSN Display OSI Abstract SyntaxDSPOSIADJN Display OSI Adjacent Node
Appendix. AS/400 Control Language Commands 65
Command Descriptive Name
DSPOSIAPPE Display OSI Application EntityDSPOSIAPPM Display OSI Application ModeDSPOSIAPPX Display OSI Application ContextDSPOSIASN Display OSI AssociationsDSPOSIAUNN Display OSI Authority NicknameDSPOSICLPS Display OSI Connectionless-Mode Path
SetDSPOSICMPS Display OSI Connection-Mode Path SetDSPOSIDMN Display OSI Management DomainDSPOSIDUAR Display OSI Directory User Agent Regis-
trationDSPOSIERR Display OSI Error CountersDSPOSIIX25 Display OSI Inbound X.25 AttributesDSPOSILCLA Display OSI Local AttributesDSPOSILINE Display OSI LineDSPOSILINS Display OSI Line SetDSPOSIMGR Display OSI ManagerDSPOSIMGRR Display OSI Manager RegistrationDSPOSINSAP Display OSI NSAP AddressDSPOSIOX25 Display OSI Outbound X.25 AttributesDSPOSIPARM Display OSI ParametersDSPOSIPRF Display OSI ProfileDSPOSIQOSM Display OSI X.25 QOS ModeDSPOSIRTE Display OSI RouteDSPOSISAP Display Service Access PointsDSPOSISSEL Display OSI Local Service Access Point
SelectorDSPOSISTC Display OSI StatisticsDSPOSISTS Display OSI StatusDSPOSISUBN Display OSI SubnetworkDSPOSITHLD Display OSI ThresholdsDSPOSITPTM Display OSI Transport ModeDSPOVR Display OverrideDSPPDGPRF Display Print Descriptor Group ProfileDSPPFM Display Physical File MemberDSPPFRDTA Display Performance DataDSPPFRGPH Display Performance GraphDSPPGM Display ProgramDSPPGMADP Display Program AdoptDSPPGMREF Display Program ReferencesDSPPGMVAR Display Program VariableDSPPRB Display ProblemDSPPTF Display Program Temporary FixDSPPWRSCD Display Power On/Off ScheduleDSPRCDLCK Display Record LocksDSPRJECFG Display RJE ConfigurationDSPSAVF Display Save FileDSPSBSD Display Subsystem DescriptionDSPSFWRSC Display Software Resources
66 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
DSPSOCSTS Display Sphere of Control StatusDSPSPLF Display Spooled FileDSPSRVPVDA Display Service Provider AttributesDSPSRVSTS Display Service StatusDSPSYSVAL Display System ValueDSPS36 Display System/36DSPTAP Display TapeDSPTRAPRF Display TRLAN Adapter ProfileDSPTRC Display TraceDSPTRCDTA Display Trace DataDSPTRNSTS Display TRN StatusDSPUSRPMN Display User PermissionDSPUSRPRF Display User ProfileDSPWSUSR Display Work Station UserDUPDKT Duplicate DisketteDUPTAP Duplicate TapeEDTAUTL Edit Authorization ListEDTDEVRSC Edit Device ResourcesEDTDLOAUT Edit Document Library Object AuthorityEDTDOC Edit DocumentEDTIGCDCT Edit DBCS Conversion DictionaryEDTIGCTBL Edit DBCS TableEDTLIBL Edit Library ListEDTOBJAUT Edit Object AuthorityEDTQST Edit Questions and AnswersEDTRBDAP Edit Rebuild Of Access PathsEDTS36PGMA Edit System/36 Program AttributesEDTS36PRCA Edit System/36 Procedure AttributesEDTS36SRCA Edit System/36 Source AttributesEJTEMLOUT Eject Emulation OutputELSE ElseEMLPRTKEY Emulate Printer KeyENCCPHK Encipher Cipher KeyENCFRMMSTK Encipher from Master KeyENCTOMSTK Encipher to Master KeyENDBCHJOB End Batch JobENDCBLDBG End COBOL DebugENDCLNUP End CleanupENDCMTCTL End Commitment ControlENDCPYSCN End Copy ScreenENDCTLRCY End Controller RecoveryENDDBG End DebugENDDEVRCY End Device RecoveryENDDO End DoENDDSKCOL End Disk Data CollectionENDEPMENV End EPM EnvironmentENDGRPJOB End Group JobENDINP End InputENDJOB End JobENDJOBABN End Job Abnormal
Appendix. AS/400 Control Language Commands 67
Command Descriptive Name
ENDJOBTRC End Job TraceENDJRNAP End Journal Access PathENDJRNPF End Journal Physical File ChangesENDLINRCY End Line RecoveryENDMOD End ModeENDNWIRCY End Network Interface RecoveryENDOSI End OSI SubsystemENDOSIASN End OSI AssociationsENDOSINL End OSI Network ResourceENDPASTHR End Pass-ThroughENDPFRMON End Performance MonitorENDPGM End ProgramENDPJ End Prestart JobsENDPRTEML End Printer EmulationENDRCV End ReceiveENDRDR End ReaderENDRJESSN End RJE SessionENDRMTSPT End Remote SupportENDRQS End RequestENDSAM End Sampled Address MonitorENDSAMCOL End Sampled Address Monitor Data Col-
lectionENDSBS End SubsystemENDSRVJOB End Service JobENDSYS End SystemENDS36 End System/36ENDTCPCNN End TCP/IP ConnectionENDTCPLNK End TCP/IP LinkENDTIESSN End Technical Information Exchange
SessionENDWTR End WriterEXTPGMINF Extract Program InformationFILDOC File DocumentFMTDTA Format DataFNDSTRPDM Find String Using PDMGENCPHK Generate Cipher KeyGENCRSDMNK Generate Cross Domain KeyGENMAC Generate Message Authentication CodeGENPIN Generate Personal Identification NumberGENS36RPT Generate System/36 ReportGENS38RPT Generate System/38 ReportsGO Go to MenuGOTO Go ToGRTACCAUT Grant Access Code AuthorityGRTOBJAUT Grant Object AuthorityGRTUSRAUT Grant User AuthorityGRTUSRPMN Grant User PermissionHLDCMNDEV Hold Communications DeviceHLDDSTQ Hold Distribution Queue
68 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
HLDJOB Hold JobHLDJOBQ Hold Job QueueHLDOUTQ Hold Output QueueHLDPTF Hold PTFHLDRDR Hold ReaderHLDSPLF Hold Spooled FileHLDWTR Hold WriterIF IfINZDKT Initialize DisketteINZPCS Initialize PC Support/400INZPFM Initialize Physical File MemberINZSYS Initialize SystemINZTAP Initialize TapeLNKDTADFN Link Data DefinitionLODPTF Load Program Temporary FixLODQSTDB Load Question-and-Answer DatabaseMDLSYS Model SystemMGRS36ITM Migrate System/36 ItemMGRS38OBJ Migrate System/38 ObjectsMONMSG Monitor MessageMOVDOC Move DocumentMOVOBJ Move ObjectMRGDOC Merge DocumentMRGFORMD Merge Form DescriptionMRGMSGF Merge Message FileOPNDBF Open Database FileOPNQRYF Open Query FileORDSPTPTF Order Supported Product PTFsOVRDBF Override with Database FileOVRDKTF Override with Diskette FileOVRDSPF Override with Display FileOVRICFDEVE Override Intersystem Communications
Function Program Device EntryOVRICFF Override with Intersystem Communica-
tions Function FileOVRMSGF Override with Message FileOVRPRTF Override with Printer FileOVRSAVF Override Save FileOVRTAPF Override with Tape FilePAGDOC Paginate DocumentPGM ProgramPOSDBF Position Database FilePRTACTRPT Print Activity ReportPRTAFPDTA Print Advanced Function Printer DataPRTCAL Print CalendarPRTCMDUSG Print Command UsagePRTCPTRPT Print Component ReportPRTCSPAPP Print CSP/AE ApplicationPRTDEVADR Print Device AddressesPRTDOC Print Document
Appendix. AS/400 Control Language Commands 69
Command Descriptive Name
PRTDSKRPT Print Disk Activity ReportPRTERRLOG Print Error LogPRTINTDTA Print Internal DataPRTJOBRPT Print Job ReportPRTJOBTRC Print Job TracePRTLCKRPT Print Lock ReportPRTPOLRPT Print Pool ReportPRTRSCRPT Print Resource ReportPRTRTLTPL Print Retail TemplatePRTSAMDTA Print Sampled Address Monitor DataPRTSYSRPT Print System ReportPRTTNSRPT Print Transaction ReportPRTTRCRPT Print Trace ReportPWRDWNSYS Power Down SystemQRYCALITM Query Calendar ItemQRYDOCLIB Query Document LibraryQRYDST Query DistributionQRYTIEF Query Technical Information Exchange
FileRCLDDMCNV Reclaim Distributed Data Management
ConversationsRCLDLO Reclaim Document Library ObjectRCLRSC Reclaim ResourcesRCLSPLSTG Reclaim Spool StorageRCLSTG Reclaim StorageRCLTMPSTG Reclaim Temporary StorageRCVDST Receive DistributionRCVF Receive FileRCVJRNE Receive Journal EntryRCVMGRDTA Receive Migration DataRCVMSG Receive MessageRCVNETF Receive Network FileRCVRTLF Receive Retail FileRCVTIEF Receive Technical Information Exchange
FileRESMGRNAM Resolve Duplicate and Incorrect Office
Object NamesRETURN ReturnRGZDLO Reorganize Document Library ObjectRGZPFM Reorganize Physical File MemberRLSCMNDEV Release Communications DeviceRLSDSTQ Release Distribution QueueRLSJOB Release JobRLSJOBQ Release Job QueueRLSOUTQ Release Output QueueRLSPTF Release PTFRLSRDR Release ReaderRLSRMTPHS Release Remote PhaseRLSSPLF Release Spooled File
70 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
RLSWTR Release WriterRMVACC Remove Access CodeRMVAJE Remove Autostart Job EntryRMVALRD Remove Alert DescriptionRMVAUTLE Remove Authorization List EntryRMVBKP Remove BreakpointRMVCALITM Remove Calendar ItemRMVCFGLE Remove Configuration List EntriesRMVCMNE Remove Communications EntryRMVCNNLE Remove Connection List EntryRMVCRSDMNK Remove Cross Domain KeyRMVDIRE Remove Directory EntryRMVDLOAUT Remove Document Library Object
AuthorityRMVDSTLE Remove Distribution List EntryRMVFCTE Remove Forms Control Table EntryRMVICFDEVE Remove Intersystem Communications
Function Program Device EntryRMVJOBQE Remove Job Queue EntryRMVJRNCHG Remove Journaled ChangesRMVLIBLE Remove Library List EntryRMVM Remove MemberRMVMSG Remove MessageRMVMSGD Remove Message DescriptionRMVNETJOBE Remove Network Job EntryRMVOFCENR Remove Office EnrollmentRMVOSIABSN Remove OSI Abstract SyntaxRMVOSIADJN Remove OSI Adjacent NodeRMVOSIAGT Remove OSI AgentRMVOSIAGTR Remove OSI Agent RegistrationRMVOSIAPPE Remove OSI Application EntityRMVOSIAPPM Remove OSI Application ModeRMVOSIAPPX Remove OSI Application ContextRMVOSIAUNN Remove OSI Authority NicknameRMVOSICLPS Remove OSI Connectionless-Mode Path
SetRMVOSICMPS Remove OSI Connection-Mode Path SetRMVOSIDUAR Remove OSI Directory User Agent Regis-
trationsRMVOSIIX25 Remove OSI Inbound X.25 AttributesRMVOSILINE Remove OSI LineRMVOSILINS Remove OSI Line SetRMVOSIMGR Remove OSI ManagerRMVOSIMGRR Remove Manager RegistrationRMVOSINSAP Remove OSI NSAP AddressRMVOSIOX25 Remove OSI Outbound X.25 AttributesRMVOSIQOSM Remove OSI X.25 QOS ModeRMVOSIRTE Remove OSI RouteRMVOSISSEL Remove OSI Local Service Access Point
Selector
Appendix. AS/400 Control Language Commands 71
Command Descriptive Name
RMVOSISUBN Remove OSI SubnetworkRMVOSITPTM Remove OSI Transport ModeRMVPGM Remove ProgramRMVPJE Remove Prestart Job EntryRMVPTF Remove Program Temporary FixRMVREXBUF Remove REXX BufferRMVRJECMNE Remove RJE Communications EntryRMVRJERDRE Remove RJE Reader EntryRMVRJEWTRE Remove RJE Writer EntryRMVRPYLE Remove Reply List EntryRMVRTGE Remove Routing EntryRMVSCHIDXE Remove Search Index EntryRMVSOCE Remove Sphere of Control EntryRMVTCPLNK Remove TCP/IP LinkRMVTCPPORT Remove TCP/IP Port EntryRMVTCPRSI Remove TCP/IP Remote System Informa-
tionRMVTCPRTE Remove TCP/IP Route EntryRMVTRA Remove TRLAN AdapterRMVTRAINF Remove TRLAN Adapter InformationRMVTRC Remove TraceRMVWSE Remove Work Station EntryRNMCNNLE Rename Connection List EntryRNMDKT Rename DisketteRNMDLO Rename Document Library ObjectRNMM Rename MemberRNMOBJ Rename ObjectROLLBACK RollbackRPLDOC Replace DocumentRRTJOB Reroute JobRSMBKP Resume BreakpointRSMCTLRCY Resume Controller RecoveryRSMDEVRCY Resume Device RecoveryRSMLINRCY Resume Line RecoveryRSMNWIRCY Resume Network Interface RecoveryRSTAUT Restore AuthorityRSTCAL Restore CalendarRSTCFG Restore ConfigurationRSTDLO Restore Document Library ObjectRSTLIB Restore LibraryRSTLICPGM Restore Licensed ProgramRSTOBJ Restore ObjectRSTS36F Restore System/36 FileRSTS36FLR Restore System/36 FolderRSTS36LIBM Restore System/36 Library MembersRSTS38AUT Restore System/38 AuthorityRSTUSRPRF Restore User ProfilesRTVAUTLE Retrieve Authorization List EntryRTVCFGSRC Retrieve Configuration Source
72 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
RTVCFGSTS Retrieve Configuration StatusRTVCLDSRC Retrieve C Locale Description SourceRTVCLNUP Retrieve CleanupRTVCLSRC Retrieve CL SourceRTVDOC Retrieve DocumentRTVDTAARA Retrieve Data AreaRTVGRPA Retrieve Group AttributesRTVJOBA Retrieve Job AttributesRTVJRNE Retrieve Journal EntryRTVLIBD Retrieve Library DescriptionRTVMBRD Retrieve Member DescriptionRTVMSG Retrieve MessageRTVNETA Retrieve Network AttributesRTVOBJD Retrieve Object DescriptionRTVPDGPRF Retrieve Print Descriptor Group ProfileRTVPWRSCDE Retrieve Power On/Off Schedule EntryRTVQMFORM Retrieve Query Management FormRTVQMQRY Retrieve Query Management QueryRTVSYSVAL Retrieve System ValueRTVUSRPRF Retrieve User ProfileRUNQRY Run QueryRVKACCAUT Revoke Access Code AuthorityRVKOBJAUT Revoke Object AuthorityRVKUSRPMN Revoke User PermissionSAVCAL Save CalendarSAVCHGOBJ Save Changed ObjectSAVDLO Save Document Library ObjectSAVLIB Save LibrarySAVLICPGM Save Licensed ProgramSAVOBJ Save ObjectSAVSAVFDTA Save Save File DataSAVSECDTA Save Security DataSAVSTG Save StorageSAVSYS Save SystemSAVS36F Save System/36 FileSAVS36LIBM Save System/36 Library MembersSBMDBJOB Submit Database JobsSBMDKTJOB Submit Diskette JobsSBMFNCJOB Submit Finance JobSBMJOB Submit JobSBMNETJOB Submit Network JobSBMRJEJOB Submit RJE JobSBMRMTCMD Submit Remote CommandSBMRTLPGM Submit Retail ProgramSETATNPGM Set Attention ProgramSETKBDMAP Set Keyboard MapSETMSTK Set Master KeySETOSIATR Set OSI AttributesSETPGMINF Set Program InformationSIGNOFF Sign Off
Appendix. AS/400 Control Language Commands 73
Command Descriptive Name
SLTCMD Select CommandSNDBRKMSG Send Break MessageSNDDOC Send DocumentSNDDST Send DistributionSNDDSTQ Send Distribution QueueSNDEMLIGC Send DBCS 3270PC Emulation CodeSNDF Send FileSNDFNCIMG Send Finance Diskette ImageSNDJRNE Send Journal EntrySNDMGRDTA Send Migration DataSNDMSG Send MessageSNDNETF Send Network FileSNDNETMSG Send Network MessageSNDNETSPLF Send Network Spooled FileSNDPGMMSG Send Program MessageSNDPTFORD Send Program Temporary Fix OrderSNDRCVF Send/Receive FileSNDRPY Send ReplySNDRTLF Send Retail FileSNDRTLRCD Send Retail RecordSNDSRVRQS Send Service RequestSNDTIEF Send Technical Information Exchange FileSNDUSRMSG Send User MessageSTRAPF Start Advanced Printer FunctionSTRAPW Start Advanced Print WriterSTRBAS Start BasicSTRBASPRC Start Basic ProcedureSTRBGU Start Business Graphics UtilitySTRCBLDBG Start COBOL DebugSTRCGU Start CGUSTRCLNUP Start CleanupSTRCMTCTL Start Commitment ControlSTRCPYSCN Start Copy ScreenSTRCSP Start CSP/AE UtilitiesSTRDBG Start DebugSTRDBRDR Start Database ReaderSTRDFU Start DFUSTRDKTRDR Start Diskette ReaderSTRDKTWTR Start Diskette WriterSTRDSKCOL Start Disk Data CollectionSTREDU Start EducationSTREML3270 Start 3270 Display EmulationSTREPMENV Start EPM EnvironmentSTRFMA Start Font Management AidSTRIDD Start Interactive Data Definition UtilitySTRIDXSCH Start Index SearchSTRITF Start Interactive Terminal FacilitySTRJOBTRC Start Job TraceSTRJRNAP Start Journal Access Path
74 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
STRJRNPF Start Journal Physical FileSTRKPF Start Kanji Printer FunctionSTRMOD Start ModeSTROFC Start OfficeSTROSINL Start OSI Network ResourceSTRPASTHR Start Pass-ThroughSTRPCCMD Start PC CommandSTRPCO Start PC Support OrganizerSTRPDM Start Programming Development ManagerSTRPFRG Start Performance GraphicsSTRPFRMON Start Performance MonitorSTRPFRT Start Performance ToolsSTRPGMMNU Start Programmer MenuSTRPJ Start Prestart JobsSTRPPW Start Page Printer WriterSTRPRTEML Start Printer EmulationSTRPRTWTR Start Printer WriterSTRQMPRC Start Query Management ProcedureSTRQMQRY Start Query Management QuerySTRQRY Start QuerySTRQST Start Question and AnswerSTRREXPRC Start REXX ProcedureSTRRJECSL Start RJE ConsoleSTRRJERDR Start RJE ReaderSTRRJESSN Start RJE SessionSTRRJEWTR Start RJE WriterSTRRLU Start Report Layout UtilitySTRRMTSPT Start Remote SupportSTRSAM Start Sampled Address MonitorSTRSAMCOL Start Sampled Address Monitor Data Col-
lectionSTRSBS Start SubsystemSTRSCHIDX Start Search IndexSTRSDA Start SDASTRSEU Start SEUSTRSPTN Start Support NetworkSTRSQL Start Structured Query LanguageSTRSRVJOB Start Service JobSTRSST Start System Service ToolsSTRS36 Start System/36STRS36MGR Start System/36 MigrationSTRS36PRC Start System/36 ProcedureSTRS38MGR Start System/38 MigrationSTRTCPFTP Start TCP/IP File Transfer ProtocolSTRTCPLNK Start TCP/IP LinkSTRTCPTELN Start TCP/IP TELNETSTRTIESSN Start Technical Information Exchange
SessionSTRWP Start Word ProcessingTFRBCHJOB Transfer Batch Job
Appendix. AS/400 Control Language Commands 75
Command Descriptive Name
TFRCTL Transfer ControlTFRGRPJOB Transfer to Group JobTFRJOB Transfer JobTFRPASTHR Transfer Pass-ThroughTFRSECJOB Transfer Secondary JobTRCCSP Trace CSP/AE ApplicationTRCICF Trace ICFTRCINT Trace InternalTRCJOB Trace JobTRCOSIASN Trace OSI AssociationsTRCOSIPCL Trace OSI ProtocolsTRCREX Trace REXXTRNPIN Translate Personal Identification NumberUPDDTA Update DataVFYCMN Verify CommunicationsVFYLNKLPDA Verify Link supporting LPDA-2VFYMSTK Verify Master KeyVFYPIN Verify Personal Identification NumberVFYPRT Verify PrinterVFYTAP Verify TapeVFYTCPCNN Verify TCP/IP ConnectionVRYCFG Vary ConfigurationWAIT WaitWRKACTJOB Work with Active JobsWRKALR Work with AlertsWRKALRD Work with Alert DescriptionsWRKALRTBL Work with Alert TablesWRKAUTL Work with Authorization ListsWRKCFGL Work with Configuration ListsWRKCFGSTS Work with Configuration StatusWRKCHTFMT Work with Chart FormatsWRKCLS Work with ClassesWRKCMD Work with CommandsWRKCNNL Work with Connection ListsWRKCNNLE Work with Connection List EntriesWRKCNTINF Work with Contact InformationWRKCOSD Work with Class-of-Service DescriptionsWRKCSI Work with Communications Side Informa-
tionWRKCTLD Work with Controller DescriptionsWRKDBFIDD Work with DB Files Using IDDUWRKDDMF Work with Distributed Data Management
FilesWRKDEVD Work with Device DescriptionsWRKDEVTBL Work with Device TablesWRKDIR Work with DirectoryWRKDOC Work with DocumentsWRKDOCLIB Work with Document LibrariesWRKDOCPRTQ Work with Document Print Queue
76 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
WRKDPCQ Work with DSNX/PC Distribution QueuesWRKDSKSTS Work with Disk StatusWRKDSTL Work with Distribution ListsWRKDSTQ Work with Distribution QueueWRKDTAARA Work with Data AreasWRKDTADCT Work with Data DictionariesWRKDTADFN Work with Data DefinitionsWRKDTAQ Work with Data QueuesWRKEDTD Work with Edit DescriptionsWRKF Work with FilesWRKFCNARA Work with Functional AreasWRKFCT Work with Forms Control TableWRKFLR Work with FoldersWRKFNTRSC Work with Font ResourcesWRKFORMDF Work with Form DefinitionsWRKGSS Work with Graphics Symbol SetsWRKHDWPRD Work with Hardware ProductsWRKHDWRSC Work with Hardware ResourcesWRKJOB Work with JobWRKJOBD Work with Job DescriptionsWRKJOBQ Work with Job QueueWRKJRN Work with JournalWRKJRNA Work with Journal AttributesWRKJRNRCV Work with Journal ReceiversWRKLIB Work with LibrariesWRKLIBPDM Work with Libraries Using PDMWRKLIND Work with Line DescriptionsWRKMBRPDM Work with Members Using PDMWRKMNU Work with MenusWRKMODD Work with Mode DescriptionsWRKMSG Work with MessagesWRKMSGD Work with Message DescriptionsWRKMSGF Work with Message FilesWRKMSGQ Work with Message QueuesWRKNAMSMTP Work with Names for SMTPWRKNETF Work with Network FilesWRKNETJOBE Work with Network Job EntriesWRKNWID Work with Network Interface Description
CommandWRKOBJ Work with ObjectsWRKOBJCSP Work with Objects for CSP/AEWRKOBJLCK Work with Object LocksWRKOBJOWN Work with Objects by OwnerWRKOBJPDM Work with Objects Using PDMWRKORDINF Work with Order InformationWRKOSIABSN Work with OSI Abstract SyntaxesWRKOSIADJN Work with OSI Adjacent NodesWRKOSIAGTR Work with OSI Agent RegistrationsWRKOSIAPPE Work with OSI Application EntitiesWRKOSIAPPM Work with OSI Application Modes
Appendix. AS/400 Control Language Commands 77
Command Descriptive Name
WRKOSIAPPX Work with OSI Application ContextWRKOSIAUNN Work with OSI Authority NicknamesWRKOSICLPS Work with OSI Connectionless-Mode Path
SetsWRKOSICMPS Work with OSI Connection-Mode Path
SetsWRKOSIDUAR Work with OSI Directory User Agent Reg-
istrationsWRKOSIIX25 Work with OSI Inbound X.25 AttributesWRKOSILINE Work with OSI LinesWRKOSILINS Work with OSI Line SetsWRKOSIMGRR Work with OSI Manager RegistrationWRKOSINSAP Work with OSI NSAP AddressesWRKOSIOX25 Work with OSI Outbound X.25 AttributesWRKOSIQOSM Work with OSI X.25 QOS ModesWRKOSIRTE Work with OSI RoutesWRKOSISSEL Work with OSI Local Service Access Point
SelectorsWRKOSISUBN Work with OSI SubnetworksWRKOSITPTM Work with OSI Transport ModesWRKOUTQ Work with Output QueueWRKOUTQD Work with Output Queue DescriptionWRKOVL Work with OverlaysWRKPAGDFN Work with Page DefinitionsWRKPAGSEG Work with Page SegmentsWRKPFRCOL Work with Performance CollectionWRKPGM Work with ProgramsWRKPGMTBL Work with Program TablesWRKPNLGRP Work with Panel GroupsWRKPRB Work with ProblemWRKPRDINF Work with Product InformationWRKPRTSTS Work with Printing StatusWRKQMFORM Work with Query Management FormWRKQMQRY Work with Query Management QueryWRKQRY Work with QueryWRKQST Work with QuestionsWRKRDR Work with ReadersWRKRJESSN Work with RJE SessionWRKRPYLE Work with System Reply List EntriesWRKRTLCMN Work with Retail CommunicationsWRKRTLCVN Work with Retail ConversionsWRKRTLTPL Work with Retail TemplatesWRKSBMJOB Work with Submitted JobsWRKSBS Work with SubsystemsWRKSBSD Work with Subsystem DescriptionsWRKSBSJOB Work with Subsystem JobsWRKSCHIDX Work with Search IndexesWRKSCHIDXE Work with Search Index EntriesWRKSHRPOOL Work with Shared Storage Pools
78 AS/400 System/36-AS/400 Command Cross-Reference
Command Descriptive Name
WRKSOC Work with Sphere of ControlWRKSPADCT Work with Spelling Aid DictionariesWRKSPLF Work with Spooled FilesWRKSPLFA Work with Spooled File AttributesWRKSPTPRD Work with Supported ProductsWRKSRVPVD Work with Service ProvidersWRKSRVRQS Work with Service RequestersWRKSSND Work with Session DescriptionWRKSYSACT Work with System ActivityWRKSYSSTS Work with System StatusWRKSYSVAL Work with System ValuesWRKTBL Work with TablesWRKTCPSTS Work with TCP/IP Network StatusWRKTIE Work with Technical Information
ExchangeWRKTRA Work with TRLAN AdaptersWRKTXTPRF Work with Text ProfilesWRKUSRJOB Work with User JobsWRKUSRPRF Work with User ProfilesWRKUSRTBL Work with User TablesWRKWTR Work with Writers
Appendix. AS/400 Control Language Commands 79
IBM
Program Number: 5763-SS1
Printed in U.S.A.
SX41-3732-ðð